Search

Current methods for the screening of viral infections in clinical settings, such as reverse transcription polymerase chain reaction (RT-qPCR) and enzyme-linked immunosorbent assay (ELISA), are expensive, time-consuming, require trained personnel and sophisticated instruments. Therefore, novel sensors that can save time and cost are required specially in remote areas and developing countries that may lack the advanced scientific infrastructure for this task. In this work, we present a sensitive, and highly specific biosensing approach for the detection of harmful viruses that have cysteine residues within the structure of their cell surface proteins. We utilized new method for the rapid screening of SARS-CoV-2 virus in biological fluids through its S1 protein by surface enhanced Raman spectroscopy (SERS). The protein is captured from aqueous solutions and biological specimens using a target-specific extractor substrate. The structure of the purified protein is then modified to convert it into a bio-thiol by breaking the disulfide bonds and freeing up the sulfhydryl (SH) groups of the cysteine residues. The formed biothiol chemisorbs favourably onto a highly sensitive plasmonic sensor and probed by a handheld Raman device in few seconds. The new method was used to screen the S1 protein in aqueous medium, spiked human blood plasma, mucus, and saliva samples down to 150 fg/L. The label-free SERS biosensing method has strong potential for the fingerprint identification many viruses (e.g. the human immunodeficiency virus, the human polyomavirus, the human papilloma virus, the adeno associated viruses, the enteroviruses) through the cysteine residues of their capsid proteins. The new method can be applied at points of care (POC) in remote areas and developing countries lacking sophisticated scientific infrastructure.

The molecular structure of many proteins contains disulfide bonds between their cysteine residues. In this work we demonstrate the utilization of the disulfide bond structure of proteins for their label-free determination by surface-enhanced Raman spectroscopy (SERS). The new approach for label-free SERS detection of proteins is demonstrated for human insulin. The protein was selectively extracted from spiked plasma samples using target-specific functionalized nanomaterial. Enzyme-linked immune assay (ELISA) was used to detect insulin in the blood plasma and cross-validate the SERS method. The disulfide bonds in the molecular structure of the protein were chemically reduced and used for their chemisorption onto the gold-coated copper oxide substrate in a unified orientation at a very short distance from the hotspots. The oriented chemisorption of the protein caused significant enhancement to the signal intensity of its Raman vibration modes. This is attributed to the strong short-range electromagnetic and chemical enhancement effects that are experienced by the immobilized protein. Using this approach, label-free and reproducible SERS detection of insulin, down to 10 zM (relative standard deviation [RSD] = 5.52%), was achieved. Sixty-five percent of proteins contain disulfide bonds in their molecular structure. Therefore, the new label-free SERS detection method has strong potential for the determination of ultralow concentrations of proteins at pathology labs and in biology research.

In this work, we demonstrate the fabrication of disposable and field deployable nanostructured conductive substrates for dual detection by Surface Enhanced Raman Scattering (SERS) and electrochemistry. Using a one-step potentiostatic process, gold nanostructures were electrodeposited on three substrates: bare indium tin oxide (ITO) electrode, ITO coated with plane gold and carbon fibre (CF) covered with ZnO nanowires (ZnO NWs). Their sensitivities were enhanced by incorporating the plane gold layer and ZnO NWs. The intensity of SERS signals produced on the nanostructured ITO substrates with 0.1 μM quinolinethiol were of the order: nanostructured gold-coated ITO > nanostructured bare ITO. The higher SERS signal on the nanostructured gold-coated ITO was attributed to the coupling between the surface plasmon polariton provided by the gold under layer and the surface plasmon resonance of the Au nanostructures. The ZnO NWs on the carbon fibre provided additional surface area for electrodeposition of gold nanostructures at high density. This led to multiple hotspots formation yielding high SERS signal intensity relative to that on a nanostructured bare carbon fibre. The nanostructured substrates, demonstrated good SERS signal reproducibility with relative standard deviation of 5.19%, 3.28% and 4.53% for Au/ITO, Au/Au-ITO and Au/ZnO-CF respectively. To demonstrate the potential application of these substrates and estimate their sensitivities, they were used to detect melamine by SERS at 1 pM (for Au nanostructures on bare ITO), 1 fM (for Au nanostructured gold-coated ITO), and 0.1 nM (for Au nanostructures on ZnO NWs-coated CF) concentrations with LOD of 0.118 pM, 0.189 fM and 57.4 pM respectively. Taking advantage of the conductive properties of gold nanostructured ITOs, electrochemical detection of 0.1 μM melamine (with an LOD of 0.05 μM) was also demonstrated. Hence, these substrates are potentially useful for SERS and electrochemical-based detection of organic toxicants.

We present a sensitive label-free surface enhanced Raman spectroscopy (SERS) method for the discrimination between the recombinant and endogenous human Erythropoietin (EPO) isoforms. The proposed methodology comprises a lectin-functionalised extractor chip for the extraction of the recombinant human EPO (rhuEPO) and the endogenous EPO (enEPO) from blood plasma. The disulfide bond molecular structure of the purified isoforms was modified to chemisorb the biomolecules onto a SERS substrate in a unified orientation, thus maximizing the reproducibility and sensitivity of the SERS measurements. The acquired SERS spectra of the EPO isoforms showed diagnostic Raman bands that allowed for the discrimination between rhuEPO and enEPO. The method was also used for the SERS quantification of rhuEPO and enEPO down to 0.1 pM and 0.5 pM, respectively. The SERS determination of the protein isoforms was cross validated against ELISA. The new SERS method has strong potential for the rapid screening of rhuEPO doping in athletes and for the therapeutic drug monitoring of rhuEPO treatment in cancer patients.

In this work, we propose a new sensitive, selective and portable surface enhanced Raman spectroscopy (SERS) methodology for the rapid on site detection of Pb(II) pollution in water. The new method utilises aminobenzo-18-crown-6 (AB18C6) as a selective recognition molecule to form a spontaneous complex with Pb(II) ions. The formed AB18C6-Pb(II) complex was rapidly immobilised onto a nanostructured gold substrate via Au-N bond formation and reproducibly screened by SERS using a handheld Raman device. For the SERS measurements, a substrate was fabricated by electrochemical deposition of gold nanostructures onto a flat gold disc, creating multiple hotspots for ultrasensitive SERS measurements. The limit of quantification (LOQ) for Pb(II) ions by the SERS method was 2.20 pM. The limit of detection (LOD) was 0.69 pM which is five orders of magnitude lower than the maximum Pb(II) level of 72 nM allowed by the US Environmental Protection Agency. The high sensitivity of the SERS substrate is attributed to the coupling between the Surface Plasmon Polariton (SPP) of its gold surface, the localised Surface Plasmon Resonance (SPR) of the gold nanostructures and the Raman radiation from the immobilised AB18C6-Pb(II) complex. The new SERS detection method was successfully applied for the selective and rapid screening of Pb(II) ion contamination in water proving its practical application for environmental analysis.

Graphical abstract Inhalation of Edoxaban DPI formulation for anticoagulation effect., Herein, we demonstrated the development and characterization of a dry powder inhaler (DPI) formulation of edoxaban (EDX); and investigated the in-vitro anticoagulation effect for the management of pulmonary or cerebral coagulopathy associated with COVID-19 infection. The formulations were prepared by mixing the inhalable micronized drug with a large carrier lactose and dispersibility enhancers, leucine, and magnesium stearate. The drug-excipient interaction was studied using X-Ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) methods. The drug and excipients showed no physical inter particulate interaction. The in-vitro drug aerosolization from the developed formulation was determined by a Twin Stage Impinger (TSI) at a flow rate of 60 ± 5 L /min. The amount of drug deposition was quantified by an established HPLC-UV method. The fine particle fraction (FPF) of EDX API from drug alone formulation was 7%, whereas the formulations with excipients increased dramatically to almost 7-folds up to 47%. The developed DPI formulation of EDX showed a promising in-vitro anticoagulation effect at a very low concentration. This novel DPI formulation of EDX could be a potential and effective inhalation therapy for managing pulmonary venous thromboembolism (VTE) associated with COVID-19 infection. Further studies are warranted to investigate the toxicity and clinical application of the inhaled EDX DPI formulation.

Highlights - Sofosbuvir metabolite was studied for the first time by Raman spectroscopy. - Cheap and disposable paper substrate was utilized for the determination of PSI-6206 by HPLC-SERS. - The use of disposable substrate eliminated the memory effect problem in the HPLC-SERS. - The SERS LOQ of PSI-6206 was 13 ng L-1 (R2 = 0.959, RSD = 5.23%), 4 orders of magnitude less than HPLC-DAD. - The HPLC-SERS method provided unique structural identification of PSI-6206 similar to HPLC-MS Abstract Sofosbuvir metabolite, 2′-deoxy-2′-fluoro-2′-C-methyluridine (PSI-6206) was studied for the first time by surface enhanced Raman spectroscopy (SERS) using the paper-based SERS substrate. The quantification limit of PSI-6206 by SERS was found to be 13 ng L−1 (R2 value = 0.959, RSD = 5.23%). For the structural and quantitative analysis of PSI-6206 in blood plasma, an interference-free HPLC-SERS method was developed and compared to HPLC-DAD and HPLC–MS methods. The SERS quantification of the drug by the paper substrate was 4 orders of magnitude more sensitive than that by the diode array detector. In addition, the SERS detection provided unique structural identification of the drug in blood plasma, similar to Mass spectroscopy detector. Due to the disposable nature of the SERS substrate, the new method does not suffer from the known “memory effect” which is known to lead to false positive identification in traditional HPLC-SERS methods. Therefore, the presented HPLC-paper SERS platform holds great potential for the sensitive and cost effective determination of drugs and their metabolites in biological fluids.

Isolating, purifying, and identifying proteins in complex biological matrices are often difficult, time consuming, and unreliable. Herein we describe a rapid screening technique for proteins in biological matrices that combines selective protein isolation with direct surface enhanced Raman spectroscopy (SERS) detection. Magnetic core gold nanoparticles were synthesized, characterized, and subsequently functionalized with recombinant human erythropoietin (rHuEPO)-specific antibody. The functionalized nanoparticles were used to capture rHuEPO from horse blood plasma within 15 min. The selective binding between the protein and the functionalized nanoparticles was monitored by SERS. The purified protein was then released from the nanoparticles' surface and directly spectroscopically identified on a commercial nanopillar SERS substrate. ELISA independently confirmed the SERS identification and quantified the released rHuEPO. Finally, the direct SERS detection of the extracted protein was successfully demonstrated for in-field screening by a handheld Raman spectrometer within 1 min sample measurement time.The rapid detection of recombinant human erythropoietin (rHuEPO) is important in competitive sports to screen for doping offences. In this article, the authors reported their technique of direct surface enhanced Raman spectroscopy (SERS) detection using magnetic core gold nanoparticles functionalized with recombinant human erythropoietin-specific antibody. The findings should open a new way for future detection of other proteins.

2,4,6-trinitrotoluene (TNT) is one of the most commonly used nitro aromatic explosives in landmine, military and mining industry. This article demonstrates rapid and selective identification of TNT by surface-enhanced Raman spectroscopy (SERS) using 6-aminohexanethiol (AHT) as a new recognition molecule. First, Meisenheimer complex formation between AHT and TNT is confirmed by the development of pink colour and appearance of new band around 500 nm in UV-visible spectrum. Solution Raman spectroscopy study also supported the AHT:TNT complex formation by demonstrating changes in the vibrational stretching of AHT molecule between 2800-3000 cm−1. For surface enhanced Raman spectroscopy analysis, a self-assembled monolayer (SAM) of AHT is formed over the gold nanostructure (AuNS) SERS substrate in order to selectively capture TNT onto the surface. Electrochemical desorption and X-ray photoelectron studies are performed over AHT SAM modified surface to examine the presence of free amine groups with appropriate orientation for complex formation. Further, AHT and butanethiol (BT) mixed monolayer system is explored to improve the AHT:TNT complex formation efficiency. Using a 9:1 AHT:BT mixed monolayer, a very low detection limit (LOD) of 100 fM TNT was realized. The new method delivers high selectivity towards TNT over 2,4 DNT and picric acid. Finally, real sample analysis is demonstrated by the extraction and SERS detection of 302 pM of TNT from spiked.

Meropenem (MPN), a broad spectrum β-lactam antibiotic, has been increasingly used in the treatment of moderate to severe bacterial infections. However, due to its short plasma half-life and chemical instability in solution form, it has been challenging to use in the intravenous formulation. This study aims to develop and characterize MPN dry powder inhaler (DPI) formulation for pulmonary delivery. The inhalable MPN particles (1-5µm) were prepared by micronization. Lactose, L-leucine and magnesium stearate (MgSt) were used in the powder formulation as carriers and dispersibility enhancers. The formulations were characterized by Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), Raman confocal microscopy, X-Ray powder diffraction analysis (PXRD), and differential scanning calorimetry (DSC) methods. The concentration of MPN was determined by using a validated HPLC method. The Fine Particle Fraction (FPF) of meropenem from powder mixtures was determined by a Twin Stage Impinger (TSI) at a flow rate of 60 L/min. The FPF of the original MPN was 1.91 % which was significantly increased to 37.5 % for the formulations with excipients. No physical interactions between the drug and the excipients observed. This study revealed the potential of a stable meropenem DPI formulation for pulmonary delivery.

Tumor necrosis factor alpha (TNF-α) is a cytokine that plays a critical role in medical conditions such cardiovascular diseases, rheumatoid arthritis, inflammatory bowel disease, Alzheimer’s and cancer. Herein, we present a new method for the determination of TNF-α by surface enhanced Raman spectroscopy (SERS). A new benzothiazole azo dye (BAN) was used as a Raman probe to detect the cytokine after its selective extraction from blood plasma using a target-specific antibody-functionalised extractor chip. The disulfide bond structure of the extracted TNF-α was reduced to generate free sulfhydryl (SH), terminal groups that adsorb preferentially onto a BAN-functionalised SERS substrate and displace the BAN Raman reporter on the substrate surface. This causes the SERS spectrum of BAN to quench proportionally with the cytokine concentration. Using this SERS quenching sensor, TNF-α was quantified down to 1 × 10−14 M (173 pg/L). The quantification of the cytokine by the SERS quenching method was cross-validated against enzyme-linked immunosorbent assay (ELISA) and the percent agreement between the two measurements was found to be 93.39 %. Since many proteins and peptides have disulfide bonds in their molecular structures, the new SERS quenching method can be extended for their ultrasensitive quantification after selective extraction from biological fluids.

Poly sodium acrylate (PSA)-coated Magnetic Nanoparticles (PSA-MNPs) were synthesized as smart osmotic draw agent (SMDA) for water desalination by forward osmosis (FO) process. The PSA-coated MNPs demonstrated significantly higher osmotic pressure (~ 30 fold) as well as high FO water flux (~ 2–3 fold) when compared to their polymer (polyelectrolyte) counterpart, even at a very low concentration of ~ 0.13 wt.% in the draw solution. The PSA polymer chain conformation – coiled to extended – demonstrates a significant impact on the availability of the polymer hydrophilic groups in solution which is the driving force to attain higher osmotic pressure and water flux. When an optimum concentration of the polymer was anchored to a NP surface, the polymer chains assume an extended open conformation making the functional hydrophilic groups available to attract water molecules. This in turn boosts the osmotic pressure and FO water flux of the PSA-MNP draw agents. The low concentration of the PSA-MNP osmotic agent and the associated high water flux enhances the cost-effectiveness of our proposed SMDA system. In addition, easier magnetic separation and regeneration of the SMDA also improves its usability making it efficient, cost-effective and environment-friendly.

We report rapid and ultra-sensitive detection system for 2,4,6-trinitrotoluene (TNT) using unmodified gold nanoparticles and surface-enhanced Raman spectroscopy (SERS). First, Meisenheimer complex has been formed in aqueous solution between TNT and cysteamine in less than 15 min of mixing. The complex formation is confirmed by the development of a pink colour and a new UV-vis absorption band around 520 nm. Second, the developed Meisenheimer complex is spontaneously self-assembled onto unmodified gold nanoparticles through a stable Au-S bond between the cysteamine moiety and the gold surface. The developed mono layer of cysteamine-TNT is then screened by SERS to detect and quantify TNT. Our experimental results demonstrate that the SERS-based assay provide an ultra-sensitive approach for the detection of TNT down to 22.7 ng/L. The unambiguous fingerprint identification of TNT by SERS represents a key advantage for our proposed method. The new method provides high selectivity towards TNT over 2,4 DNT and picric acid. Therefore it satisfies the practical requirements for the rapid screening of TNT in real life samples where the interim 24-h average allowable concentration of TNT in waste water is 0.04 mg/L.

This communication presents a new pathway for the more precise quantification of surface-enhanced Raman scattering (SERS) enhancement factor via deducing resonance Raman scattering (RRS) effect from surface-enhanced resonance Raman scattering (SERRS). To achieve this, a self-assembled monolayer of 1,8,15,22-tetraaminophthalocyanatocobalt(II) (4α-CoIITAPc) is formed on plasmon inactive glassy carbon (GC) and plasmon active GC/AuNP surface. The surfaces are subsequently used as common probes for electrochemical and Raman (RRS and SERRS) studies. The most crucial parameters required for the quantification of SERS substrate enhancement factor (SSEF) such as real surface area of GC/AuNPs substarte and the number of 4α-CoIITAPc molecules contributing to RRS (on GC) and SERRS (on GC/AuNPs) are precisely estimated by cyclic voltammetry experiments. The present approach of SSEF quantification can be applied to varieties of surfaces by choosing an appropriate laser line and probe molecule for each surface. Keywords: Surface-enhanced Raman scattering (SERS), Electrochemistry and voltammetry, Nanoparticles, SERS substrate enhancement factor (SSEF), Quantification of SERS enhancement factor, 1,8,15,22-Tetraaminophthalocyanatocobalt(II)

Deep Raman spectroscopy has been utilized for the standoff detection of concealed chemical threat agents from a distance of 15 meters under real life background illumination conditions. By using combined time and space resolved measurements, various explosive precursors hidden in opaque plastic containers were identified non-invasively. Our results confirm that combined time and space resolved Raman spectroscopy leads to higher selectivity towards the sub-layer over the surface layer as well as enhanced rejection of fluorescence from the container surface when compared to standoff spatially offset Raman spectroscopy. Raman spectra that have minimal interference from the packaging material and good signal-to-noise ratio were acquired within 5 seconds of measurement time. A new combined time and space resolved Raman spectrometer has been designed with nanosecond laser excitation and gated detection, making it of lower cost and complexity than picosecond-based laboratory systems.

Spatially offset Raman spectroscopy (SORS) is a powerful new technique for the non-invasive detection and identification of concealed substances and drugs. Here, we demonstrate the SORS technique in several scenarios that are relevant to customs screening, postal screening, drug detection and forensics applications. The examples include analysis of a multi-layered postal package to identify a concealed substance; identification of an antibiotic capsule inside its plastic blister pack; analysis of an envelope containing a powder; and identification of a drug dissolved in a clear solvent, contained in a non-transparent plastic bottle. As well as providing practical examples of SORS, the results highlight several considerations regarding the use of SORS in the field, including the advantages of different analysis geometries and the ability to tailor instrument parameters and optics to suit different types of packages and samples. We also discuss the features and benefits of SORS in relation to existing Raman techniques, including confocal microscopy, wide area illumination and the conventional backscattered Raman spectroscopy. The results will contribute to the recognition of SORS as a promising method for the rapid, chemically specific analysis and detection of drugs and pharmaceuticals.

Modern detection and identification of chemical and biological hazards within the forensic and homeland security contexts may well require conducting the analysis in field while adapting a non-contact approach to the hazard. Technological achievements on both surface and resonance enhancement Raman scattering re-developed Raman spectroscopy to become the most adaptable spectroscopy technique for stand-off and non-contact analysis of hazards. On the other hand, spatially offset Raman spectroscopy proved to be very valuable for non-invasive chemical analysis of hazards concealed within non-transparent containers and packaging.

Molecular recognition of different enantiomers of a drug has become of increasing importance in the last decade due to the racemic switch strategy adapted by the pharmaceutical industry. Different analytical techniques to carry out enantioselective analysis of chiral compounds have been suggested in the literature. In the following, a brief overview of different techniques used for enantioselective analysis is given. Challenging aspects of these techniques, such as the quality of analytical information received from each technique, advantages, and disadvantages are discussed. Alternatives (enantioselective membranes, amperometric biosensors, molecularly imprinted polymers (MIPs)), capable of meeting the requirements of industrial processes, in terms of productivity, cost-effectiveness, and environmental issues are critically reviewed.

Newly developed solid contact ion-selective electrodes (SC-ISE) have been proposed for determining diazepam, bromazepam and clonazepam 1,4-benzodiazepines in pure forms and in pharmaceutical preparations. The electrodes are based on polyvinylchloride (PVC) membranes doped with drug-tetraphenyl borate (TPB) or drug-phosphotungestic acid (PTA) ion pair complexes as electroactive materials. The new electrodes proved highly selective with selectivity coefficients ranging from 10 −4 to 10 −6 and detection limits ranging from 0.1 to 0.63g/ml. Successful application of developed electrodes for drugs determinations in pharmaceutical preparations was obtained. Calibration graphs were linear over the ranges of 0.29–71.20, 0.79–31.62 and 0.32–31.57g/ml for diazepam, bromazepam and clonazepam, respectively with slopes of 50–65 mV per decade in the optimum pH range of 4–7. Relative average errors ≤1.72% and relative standard deviations ≤1.13% were obtained. Statistical student’s t-test and F-test showed insignificant systematic error between measured and real values and also between developed ion-selective electrodes methods and a standard HPLC method. © 2003 Elsevier B.V. All rights reserved.

New, simple, low cost and sensitive ion-selective electrodes are described for the determination of some 1,4-benzodiazepines in their pharmaceutical preparations as well as in biological fluids. Drug-tetraphenylborate and drug-phosphotungstate ion pairs have been prepared and used as electroactive materials. Poly(vinyl chloride) (PVC), and poly(esterurethane)s (UPCLs, UPBA, and UPDEGA) are used as the matrix. The proposed sensors give rapid Nernstian responses for 10−4–10−6 M of the abovementioned drugs in a pH range of 3–7. The membranes developed have potential stability for up to 4 weeks and show high selectivity for the investigated drugs over many interfering ions. The electrodes are used for determining trace amounts of bromazepam, clonazepam and diazepam in their pharmaceutical preparations as well as in biological fluids. For pharmaceutical preparations, the relative standard deviation (RSD) values were in the range, 1.37–4.1, 0.7–2.52 and 0.3–1.2% for bromazepam, clonazepam and diazepam, respectively using the PVC based electrodes, while for the UPBA based electrodes, the (RSD) values were in the range 0.6–3.35, 0.7–2.45 and 0.6–2.41%. For biological samples, the RSD values were 0.64–1.88, 0.37–1.8 and 1.36–3.57% for bromazepam, clonazepam and diazepam, respectively. Comparison of the results obtained using the proposed electrodes with those found using a (HPLC) reference method showed that the ion-selective electrode technique is sensitive, reliable and can be used with very good accuracy and high % recovery without pretreatment procedures of the samples to minimize interfering matrix effects.