Search

The adoption of effective, minimal, and versatile electrocatalysts for water splitting to generate hydrogen fuels is of critical importance. The bulk of newly described materials have considerable onset potential, but their electrocatalytic activity is limited by weak electrical conductivity and a limited range of catalytic sites. The combination of a few precious metals added with transition metal-based compounds is a novel and captivating approach. Herein, cobalt ferrite oxide (Co 2 FeO 4) @ palladium oxide (PdO) nanostructures have been prepared through the combined use of hydrothermal and ultraviolet (UV) irradiation techniques. For hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) kinetics, the modified composition offers a high concentration of active sites, improved electrical conductivity, and stability. The Co, Fe, and Pd ions at the composite system's interface may affect the adsorption energy of reaction intermediates synergistically, enabling the process to continue with less potential. The electrocatalyst Co 2 FeO 4 @PdO demonstrates an excellent bifunctional approach to electrochemical water splitting (EWS) for HER and OER in alkaline medium. As-prepared electrocatalyst shows an overpotential value of 269 and 259 mV for HER and OER at 10 and 20 mA/cm2 current densities respectively. The low charge transfer resistance values such as 72.2 and 62.4 Ω and durability for 48 h has been observed toward HER and OER , support this material as an efficient and durable electrocatalyst for energy conversion systems. [Display omitted] • Effective Cobalt–Iron-Ferrite oxides and Palladium-oxide based bifunctional electrocatalyst. • Promising activity for HER and OER with lower Tafel slope values in the alkaline media. • Longer stability and durability for 20 h. [ABSTRACT FROM AUTHOR]

A binder-free and flexible Au electrode is prepared by spontaneous deposition of Au onto a A4 (A4-paper)-8B (8B pencil)-Ni Film substrate (ABNi) which is assembled by electrodeposition of nanoscale Ni particles on the surface of A4 paper coated by 8B pencil. The morphology and phase structure of the (A4-paper)-8B (8B pencil)-Ni Film-Au (ABNiAu) electrode are characterized by scanning electron microscopy equipped with energy dispersive X-ray spectrometer and X-ray diffractometer. The catalytic activity of the ABNiAu electrode for NaBH 4 electrooxidation is investigated by means of cyclic voltammetry and chronoamperometry. The electrode exhibits a high electric conductivity and the activity substance attaches to the surface of paper substrate tightly and does not fall off at all and the nanoscale Ni and Ni Au alloy enhance the broken of the B H bond in the BH 4 − , all of which lead to a high catalytic activity for NaBH 4 electrooxidation. The oxidation current density reaches 300 mA cm −2 in 1 mol dm −3 NaOH and 0.1 mol dm −3 NaBH 4 at −0.2 V. The exchanged electrons (n) is 6.0 (8.0 in theory), which indicates that the ABNiAu electrode has much higher utilization efficiency of the fuel than our reported LaNi 5 /Pd (n = 4) electrode. [ABSTRACT FROM AUTHOR]

[Display omitted] • LiCoO 2 powder leaching was achieved by microwave via deep eutectic solvent. • Two kinds of deep eutectic solvents were used in this microwave-ultra-fast leaching. • Over 90 % of Li and Co were leached at 4 min and 160 W by adding urea / lactic acid. • Li and Co leaching were controlled by shrinking core model of chemical reaction. The large-scale use of electric vehicles produced massive discarded lithium-ion batteries, containing many recyclable valuable metals and toxic and harmful substances. Biodegradable and recyclable deep eutectic solvent (DES) is considered a green recycling technology for spent LIBs. Herein, we proposed a microwave-enhanced approach to shorten the leaching time in the urea/lactic acid: choline chloride: ethylene glycol DES system. The dipole moments induced by urea or lactic acid on LiCoO 2 surface increased over two orders of magnitude under the high electric field. Because of this, over 90 % of Li and Co can be fast leached at 4 min and 160 W in the urea/lactic acid: choline chloride: ethylene glycol DES system. Meanwhile, we established two models to explain the leaching mechanism of metal ions from their leaching kinetics and micro-level behavior, and named them dot-etching and layer-peeling processes, respectively. By further analyzing, we found that the dot-etching can be attributed to the synergistic effect of reduction and coordination, which caused the surface of leaching residues porous. The layer-peeling process depends on neutralization, and the leaching residues had a smooth surface in this process. This work highlights the effect of microwave-enhanced strategy and DES surface chemistry on spent electrode materials recovery. [ABSTRACT FROM AUTHOR]

A novel electrode of PdCu nanoparticles modified free-standing reduced graphene oxide (rGO) framework (PdCu@rGOF) is fabricated via electrodeposition and chemical reduction and employed to the direct sodium borohydride-hydrogen peroxide fuel cell (DBHPFC). The resultant catalyst reveals excellent catalytic performance towards hydrogen peroxide (H 2 O 2) electroreduction reaction (HPRR) and sodium borohydride (NaBH 4) electrooxidation reaction (BOR) along with low activation energy (E a). Numerically, the PdCu@rGOF electrode delivers an HPRR current density of 455.2 mA cm−2 at 0 V (2 mol L−1 H 2 SO 4 +1.3 mol L−1 H 2 O 2). Additionally, the current density of BOR reaches up to 1065.3 mA cm−2 at 0 V for 2 mol L−1 NaOH and 0.3 mol L−1 NaBH 4. Meanwhile, the mechanism studies show that HPRR and BOR catalyzed by PdCu@rGOF mainly relates 2-electron-transfer process and quasi-8-electron-transfer process, respectively. Subsequently, PdCu@rGOF is assembled into a fuel cell, yielding the optimal power density of 188.9 mW cm−2. The open circuit potential (OCP) of DBHPFC is about 1.70 V at 293.15 K. The superior electrochemical performance of the optimized electrode can be attributed to the distinctive architecture and the strong adsorption and bond-breaking ability of Pd nanoparticles. This work indicates that the as-prepared PdCu@rGOF can be a promising catalyst for DBHPFC. [Display omitted] • A novel 3D through-hole rGOF framework has been successfully prepared. • PdCu@rGOF displays an excellent catalytic performance for HPRR and BOR. • PdCu@rGOF can be applied to both anode and cathode of DBHPFC. • DBHPFC presents high power density and operation stability. [ABSTRACT FROM AUTHOR]

Development of efficient, low cost and multifunctional electrocatalysts for water splitting to harvest hydrogen fuels is a challenging task, but the combination of carbon materials with transition metal-based compounds is providing a unique and attractive strategy. Herein, composite systems based on cobalt ferrite oxide-reduced graphene oxide (Co 2 FeO 4) @(rGO) using simultaneous hydrothermal and chemical reduction methods have been prepared. The proposed study eliminates one step associated with the conversion of GO into rGO as it uses direct GO during the synthesis of cobalt ferrite oxide, consequently rGO based hybrid system is achieved in-situ significantly, the optimized Co 2 FeO 4 @rGO composite has revealed an outstanding multifunctional applications related to both oxygen evolution reaction (OER) and hydrogen counterpart (HER). Various metal oxidation states and oxygen vacancies at the surface of Co 2 FeO 4 @rGO composites guided the multifunctional surface properties. The optimized Co 2 FeO 4 @rGO composite presents excellent multifunctional properties with onset potential of 0.60 V for ORR, an overpotential of 240 mV at a 20 mAcm−2 for OER and 320 mV at a 10 mAcm−2 for HER respectively. Results revealed that these multifunctional properties of the optimized Co 2 FeO 4 @ rGO composite are associated with high electrical conductivity, high density of active sites, crystal defects, oxygen vacancies, and favorable electronic structure arisinng from the substitution of Fe for Co atoms in binary spinel oxide phase. These surface features synergistically uplifted the electrocatalytic properties of Co 2 FeO 4 @rGO composites. The multifunctional properties of the Co 2 FeO 4 @ rGO composite could be of high interest for its use in a wide range of applications in sustainable and renewable energy fields. Illustration of multifunctional surface properties of Co 2 FeO 4 @rGO composite. [Display omitted] • In situ rGO and cobalt ferrite oxide (Co 2 FeO 4 @rGO) composite is prepared. • The synthesized composite exhibited tri-functional water catalysis. • Composite shows an overpotential of 240 mV at a 20 mAcm−2 for OER. • A long term durability of 48 h was also demonstrated by composite material. [ABSTRACT FROM AUTHOR]

Abstract: Ni(OH)2 nanosheets are directly grown on nickel foam by a simple template-free growth process. Their microstructure and surface morphology are studied by X-ray diffraction spectroscopy and scanning electron microscopy. The XRD and SEM results show that Ni(OH)2 has a β-phase structure and covers the nickel foam skeleton with nanosheets. This β-Ni(OH)2/Ni-foam electrode exhibits a high specific electric quantity of 790.3 C g−1 approaching the theoretical value (1040.6 C g−1) and high electrochemical activity. Asymmetric supercapacitor has been fabricated successfully using β-Ni(OH)2/Ni-foam nanosheets as positive electrode and activated carbon as negative electrode in a KOH aqueous electrolyte. The electrochemical capacitances of this supercapacitor are investigated by cyclic voltammetry, galvanostatic charge/discharge and electrochemical impedance spectroscopy. An asymmetric supercapacitor AC/6 mol L−1 KOH/β-Ni(OH)2/Ni-foam could be cycled reversibly in the high-voltage region of 0–1.6 V and displays intriguing performances with a specific capacitance of 105.8 F g−1 and high energy density of 36.2 W h kg−1. Importantly, this asymmetric supercapacitor device exhibits an excellent long cycle life along with 92% specific capacitance retained after 1000 cycles. [Copyright &y& Elsevier]

Abstract: The electrode of array of CuO nanosheet is prepared via a template-free growth method, and it is doped by Ag via the silver mirror reaction. The morphology of Ag-doped CuO nanosheet is examined by scanning electron microscopy. The phase structure of the Ag-doped CuO nanosheet is analyzed by X-ray diffraction spectroscopy. The supercapacitance behavior of Ag-doped CuO nanosheet is investigated by cyclic voltammetry, galvanostatic charge/discharge test and electrochemical impedance spectroscopy. The results show that the thickness of a single nanosheet is up to around 150nm. The specific capacitance of the Ag-doped CuO nanosheet electrode is 689Fg−1 at 1Ag−1 and 299Fg−1 at 10Ag−1, respectively, much higher than that of the unmodified CuO nanosheet arrays (418Fg−1 at 1Ag−1 and 127Fg−1 at 10Ag−1). The improved capacitance is explained in terms of the presence of dispersed Ag particle coated the CuO nanosheet arrays having good electrical conductivity. [Copyright &y& Elsevier]

Abstract: Co3O4 nanowire arrays freely standing on nickel foam are prepared via template-free growth followed by thermal treatment at 300°C in air. Their morphology is examined by scanning and transmission electron microscopy. The electrochemical capacitance behavior of the self-supported binderless nanowire array electrode is investigated by cyclic voltammetry, galvanostatic charge–discharge test and electrochemical impedance spectroscopy. The results show that nanowires are formed by nanoplatelets packed roughly layer by layer. They densely cover the nickel foam substrate and have diameters around 250nm and the lengths up to around 15μm. The Co3O4 nanowires display a specific capacitance of 746Fg−1 at a current density of 5mAcm−2. The capacitance loss is less than 15% after 500 charge–discharge cycles. The columbic efficiency is higher than 93%. [Copyright &y& Elsevier]

Electricity production and modeling of microbial fuel cell (MFC) from continuous beer brewery wastewater was studied in this paper. A single air-cathode MFC was constructed, carbon fiber was used as anode and diluted brewery wastewater (COD=626.58mg/L) as substrate. The MFC displayed an open-circuit voltage of 0.578V and a maximum power density of 9.52W/m3 (264mW/m2). Using the model based on polarization curve, various voltage losses were quantified. At current density of 1.79A/m2, reaction kinetic loss and mass transport loss both achieved to 0.248V; while ohmic loss was 0.046V. Results demonstrated that it was feasible and stable for producing bioelectricity from brewery wastewater; while the most important factors which influenced the performance of the MFC are reaction kinetic loss and mass transport loss. [Copyright &y& Elsevier]

Potassium ion batteries or capacitors are a promising technology for large-scale energy storage due to the abundant resource and low cost of potassium. However, the development of stable electrode materials with high capacity, capable rate ability, and excellent cycling stability remains a challenge. Herein, carbon dots modified reduced graphene oxides (LAP-rGO-CDs) are designed and synthesized via a rapid and green microwave-assisted method with l -Ascorbic acid 6-palmitate (LAP) as the reducing agent. LAP-rGO-CDs present enlarged interlayer spacing and faster ion transfer rate owing to the introducing of carbon dots. Serving as a potassium ion battery electrode, LAP-rGO-CDs showed a high specific capacity of 299 mAh g−1 at 1 A g−1 and excellent cycling stability. Moreover, a LAP-rGO-CDs//AC full carbon-based potassium ion capacitor is assembled and displays a maximum energy density of 119 Wh kg−1 and a power density of 5352 W kg−1. This work demonstrates the potential application of LAP-rGO-CDs for high-performance potassium ion storage. [Display omitted] [ABSTRACT FROM AUTHOR]

Integrating transition metal complexes with carbon-based materials, especially graphene, is a useful strategy for synthesizing effective hydrogen evolution catalysts. Herein, we report a design of hollow hexagonal NiSe–Ni 3 Se 2 nanosheets grown on reduced graphene oxide (NiSe–Ni 3 Se 2 /rGO) by a simple hydrothermal method as an effective catalyst for hydrogen evolution reaction (HER) in the full pH range. In 0.5 M H 2 SO 4 , the NiSe–Ni 3 Se 2 /rGO possesses 112 mV to achieve 10 mA cm−2 and a small Tafel slope (61 mV dec−1). In 1.0 M PBS and 1.0 M KOH, the overpotentials are 261 and 188 mV at 10 mA cm−2, and Tafel slopes are 103 and 92 mV dec−1, respectively. Meanwhile, it owns good cycle stability and durability over 20 h in the whole pH range (0-14). In all solutions, the HER performance of NiSe–Ni 3 Se 2 /rGO is better than that of NiSe–Ni 3 Se 2. This is because the rGO substrate accelerates the electron transfer and improves the electrical conductivity, increasing HER activity of catalyst. • The hollow hexagonal NiSe-Ni3Se2 nanosheets uniformly decorate the rGO. • The hollow structure exposes more active sites and transport pathways. • The hybrid material exhibits superior performance for HER in all pH media. • The stability of the composite is good under a variety of pH conditions. [ABSTRACT FROM AUTHOR]

The highly porous electrode of a crisscrossed CoNi nanosheets array grown on reduced graphene oxide decorated Ni foam (CoNi/rGO@Ni foam) is fabricated through a facile dip and dry method followed by electroreduction and electrodeposition methods. The phase composition and morphology of the electrode are characterized by XRD, SEM, TEM, and EDS. In single electrode tests, CoNi/rGO@Ni foam electrode displays an excellent catalytic performance (330 mA cm−2 at 0.6 V) and stability towards urea electrooxidation when comparing to Ni foam and CoNi nanosheets modified Ni foam (CoNi@Ni foam) electrode. Besides, a low initial oxidation potential of urea electro-oxidation to 0.14 V is achieved on the CoNi/rGO@Ni foam electrode. The introducing of rGO to the electrode greatly reduced the reaction activation energy from 14.47 to 10.35 kJ mol−1. Besides, large active surface area (261.67 cm2) is also obtained from the electrode. The CoNi/rGO@Ni foam anode exhibits a maximum power density of 12.58 mW cm−2 in direct urea-hydrogen peroxide fuel cell tests. Excellent performance shows in single electrode tests and fuel cell tests suggest that addition of rGO to the electrode is an easy and feasible method to enhance the performance of the catalyst. • Highly porous electrode: crisscrossed nanosheets array grows on rGO modified Ni foam. • The influence of rGO on the catalytic performance of the electrode was researched. • Low initial oxidation potential towards urea electro-oxidation was obtained. • Achieved an excellent performance and stability when practical use in DUHPFC. [ABSTRACT FROM AUTHOR]

Seeking the efficient and robust electrocatalysts necessarily enhances performance of hydrogen evolution reaction (HER). Increasing the surface active sites is a means to improve the performance. Herein, we use the Ni 0·85 Se anchored on reduction of graphene oxide (Ni 0·85 Se/rGO) hybrid material skillfully established by one-step facile hydrothermal method as a robust and stable electrocatalyst applying to hydrogen evolution reaction (HER). In terms of morphology, Ni 0·85 Se nanospheres composed of many nanosheets are uniformly distributed on the graphene sheet layer. We also detailedly analyze its properties. Based on the interaction between Ni 0·85 Se and rGO, and the roles of graphene are as a substrate to heighten conductivity, possesses more active surface area by limiting growth of Ni 0·85 Se, and increases dispersion for exposing more active surface area and enlarge ion/electron transfer rate. In HER, the Ni 0·85 Se/rGO catalyst displays the overpotential of 128 mV with a common current density of 10 mA cm−2, a small Tafel slope of 91 mV dec−1, an extremely low onset potential of 37 mV, outstanding stability that a high current retention of 97.7% after 1000 cycles and well long-term stability for 18 h, outperforming the capability of Ni 0·85 Se nanospheres in alkaline solution for HER. The above results indicate that the Ni 0·85 Se/rGO hybrid material is a good HER ability and non-noble metal electrocatalyst has potential value in HER. • The Ni 0.85 Se nanospheres uniformly decorate the rGO sheets. • The Ni 0.85 Se/rGO electrocatalyst possesses more active surface area. • The stability of the composites can reach 97.7%. • The hybrid material exhibits superior performance for HER. [ABSTRACT FROM AUTHOR]

Herein, the vertical thin nickel–iron layered double hydroxide nanosheets grown on the hills-like nickel framework (NiFe LDH/Ni@NF) are employed for the oxygen evolution reaction (OER), securing at the low overpotentials of 197 and 270 mV to obtain the current densities of 20 and 100 mA cm−2, respectively, with a Tafel slope of 73.34 mV dec−1. The electrodeposited nickel film induces the NiFe LDH nanosheets grow vertically and thinly. As well, the nickel abundant interfaces and inner space makes this catalyst effective for OER. It was further served as the OER electrode in a water splitting system coupled the Pt/C cathode, and a cell voltage was at 1.52 and 1.67 V to achieve the current density of 10 mA cm−2 and 50 mA cm−2. In addition, the water electrolyzer can suffer a long time of 24 h at 50 mA cm−2, showing the feasibility in a practical unbiased alkaline water splitting system. • The vertical thin Ni 4 Fe 1 LDH-16h was prepared on the hills-like nickel framework. • The crosslinked nanosheets can offer amounts of active sites for OER. • It achieves a low overpotential of 197 mV to drive 20 mA cm−2 for OER. • The assembled electrolyzer exhibits enhanced performance. [ABSTRACT FROM AUTHOR]

The room temperature abrasive wear behavior of three selected MAX phases, Ti 3 SiC 2 , solution strengthened Ti 2.7 Zr 0.3 SiC 2 and Cr 2 AlC, is investigated by low velocity scratch testing using a diamond conical indentor with a final radius of 100 μm and a cone angle of 120° and applied loads of up to 20 N. All three materials showed a relatively low wear resistance in comparison to most engineering ceramics such as Al 2 O 3, Si 3 N 4 and SiC. For all three materials, the wear rate scaled more or less linearly with the applied load. The softer Ti 3 SiC 2 with a hardness of 2.8 GPa showed the lowest wear resistance with extensive ploughing and grain breakout damage, both within and outside the direct wear track, in particular at the highest load. The hardest material, Ti 2.7 Zr 0.3 SiC 2 , with a hardness of 7.3 GPa, showed a 5 times better wear resistance. The Cr 2 AlC with a hardness of 4.8 GPa showed a wear resistance equal to or even better than that of the Ti 2.7 Zr 0.3 SiC 2. The wear mechanism depends on the applied load and the microstructure of the MAX phase materials tested. For the Ti 3 SiC 2 sample, a quasi-plastic deformation behavior occurs below a point load of 10 N, resulting in grain bending, kink band formation and delamination, grain de-cohesion, as well as trans-and intra-granular fracture near the scratch groove. At this load, the Ti 2.7 Zr 0.3 SiC 2 and Cr 2 AlC MAX samples display plastic ploughing, grain boundary cracks and material dislodgments. [ABSTRACT FROM AUTHOR]

An original three-dimensional self-supported reduced graphene oxide (rGO) foam is successfully prepared in this work. This novel support material, modified with Co nanosheets and Au nanoparticles, is employed as a high-performance catalyst for NaBH 4 electrooxidation under alkaline condition. The surface chemical component and morphology of the catalyst is characterized by X-ray diffraction pattern, X-ray photoelectron spectroscopy, scanning electron microscope. The synthesized electrode exhibits excellent performance (1.35 A cm−2 at 0 V) towards NaBH 4 electrooxidation. The unique structure of rGO foam caused a large electrochemical active surface area (EASA (Au) = 390 m2 g−1), low electrochemical impedance, as well as 55.4% utilization efficiency of NaBH 4. Also, catalytic kinetic parameters during the electrooxidation reaction of NaBH 4 in a low NaBH 4 concentration are investigated. Results indicate that oxidation of BH 4 − is a first-order reaction, and the exchanged number of electrons obtained at the CoAu/rGO foam electrode is 6.9. Finally, we practically apply it to a direct borohydride-hydrogen peroxide fuel cell (DBHPFC). This work suggests that the prepared rGO foam is an excellent current collector, and CoAu/rGO foam electrode is a promising anode catalyst to apply in DBHPFC. Image 1 [ABSTRACT FROM AUTHOR]

As one of the promising anode materials for lithium ion battery, organic materials are widely regarded. Hence, poly (1,4,5,8-naphthalenetetracarboxylic sulfonyl) imine (PNSI) exhibits promising electrochemical performance as the anode of aqueous lithium-ion batteries (ALIBs) owning to presence of redox C O and S O groups. However, this PNSI has low electronic conductivity, so a significant amount of conducting carbon is required in the preparation of PNSI electrode to achieve good conductivity, which remarkably reduced the specific capacity of the electrode. In this study, a simple in-situ graphene coating method is developed and the obtained PNSI@rGO composite displays significantly improved electrochemical performance. The PNSI wrapped by 20.5% rGO (PNSI@rGO-20.5%) has a specific discharge capacity of 141.8 mAh g−1 after 1000 cycles at 1A g−1 without the addition of a any extra conductive agents. The capacity retention ratio of PNSI@rGO-20.5%||LiMn 2 O 4 full cell assembled with PNSI@rGO-20.5% as anode and LiMn 2 O 4 as cathode is 83.0% after 1000 cycles at 1A g−1. The excellent electrochemical performance of PNSI@rGO-20.5% composite makes it a potential anode material for ALIBs. [Display omitted] [ABSTRACT FROM AUTHOR]

In this paper, we report the three-dimensional self-supported CoMoO 4 nanosheet clusters on the nickel foam (denoted as CoMoO 4 /NF) by a facile hydrothermal-calcination method for efficient hydrogen generation. As a result, the freestanding CoMoO 4 electrode exhibits an efficient electrochemical activity towards hydrogen evolution reaction, showing overpotentials as low as 68 and 178 mV at current densities of 10 and 100 mA cm−2 in the alkaline condition (1 M KOH), respectively, a Tafel slope value of 82 mV per decade. Moreover, the electrode exhibits remarkable electrochemical durability for 1000 cycles. Significantly, the water splitting electrolyzer assembled with CoMoO 4 /NF || NiFe LDH/NF (the nickel iron layered double hydroxide supported on the nickel foam) system achieved 20 mA cm−2 at 1.63 V, showing the CoMoO 4 /NF is promising for practical water splitting applications. • The low-cost and effective transition metal oxide of CoMoO 4 was adopted for hydrogen generation. • The open nanostructure can facilitate permeating electrolyte as well as releasing hydrogen molecules. • The crosslinked nanosheet clusters can offer amounts of active sites for hydrogen evolution reaction. [ABSTRACT FROM AUTHOR]

Abstract At present, there is an urgent need for plentiful non-noble metal catalyst to substitute for valuableness platinum based metal catalyst in electrochemical water splitting. Here, we fabricated a three-demensional (3D) Ni Co NiCo 2 O 4 nanosheets electrocatalyst that directly grew on Ni foam firstly and then were reduced in 0.1 mol dm−3 sodium borohydride solution. This electrode exhibited high activity in 1.0 mol dm−3 KOH solution with an onset potential of ∼40 mV and a tafel slope of 77 mV dec−1. Furthermore, the Ni Co NiCo 2 O 4 /NF electrode showed a splendid durability during long-playing electrochemical test. Our work may provide an inexpensive, easy-to-obtain and excellent catalyst candidate for future electrolytic water research and industry studies that may involve hydrogen applications in the future. Highlights • The Ni Co NiCo 2 O 4 /NF is an inexpensive, easy-to-obtain and excellent electrode. • When the current density up to 10 mA cm−2 requires an overpotential 125 mV. • Metallic Ni and Co core enhance the electrode activity. [ABSTRACT FROM AUTHOR]

Abstract Almost pure (Ti 1- x Zr x) 3 SiC 2 MAX phase solid solutions with x ranging up to 0.17 were synthesized at temperatures in the range of 1450–1750 °C with reactive Spark Plasma Sintering (SPS). The zirconium partially replaces the M-element titanium of the Ti 3 SiC 2 MAX phase up to x equals 0.17. The lattice parameters of the hexagonal (Ti 1- x Zr x) 3 SiC 2 MAX phase are determined with X-ray diffraction using Rietveld refinement and show an anisotropic lattice expansion upon Zr insertion into Ti 3 SiC 2. This observation is in very good agreement with density functional theory calculations where the deviation between the measured and calculated lattice parameter is less than 1%. The predicted elastic modulus reduction is only 4%. This behavior can be rationalized by considering the electronic structure, where only minute changes are observable as Zr is incorporated into Ti 3 SiC 2. The measured nanohardness of the synthesized (Ti 1- x Zr x) 3 SiC 2 MAX phase increases from 12.7 ± 1 GPa for Ti 3 SiC 2 to 16.3 ± 1.1 GPa when x is raised from 0 to 0.17 due to an increasing amount of accompanying Ti 1- y Zr y C. The elastic moduli of (Ti 1- x Zr x) 3 SiC 2 solid solutions measured by an ultrasonic pulse-echo method (325–354 GPa) are in good agreement with the predicted elastic moduli (357–342 GPa). [ABSTRACT FROM AUTHOR]

Abstract In this work, activated carbon tube bundles (ACTBs) with porous hollow structure are prepared using dandelion fluffs as precursors. The open-framework porous structure of the ACTBs contributes to large specific surface area and enhanced electrochemical performances. Then the ACTBs are further modified with polyaniline (PANI) using the in-situ polymerization method, the unique hollow tube structure of the ACTBs effectively increases the growth area for the PANI. The PANI modified ACTBs (PANI/ACTBs) composite exhibits an excellent rate performance due to the highly retained porous hollow tube structure, which promotes the electrolyte ions diffusion and electron transport. Meanwhile, the ACTBs and PANI/ACTBs serve as the cathode and anode electrode materials for asymmetric supercapacitor, respectively. As a result, the asymmetric supercapacitor displays a high energy density of 42 Wh kg−1 and a capable cycling stability. These results demonstrate that the PANI/ACTBs composite is a promising electrode material for the energy storage devices. Graphical abstract Image 1 Highlights • The porous structure of the ACTBs contributes to the enhancement of the specific surface area and cycling stability. • The ACTBs can solve the aggregation problem and provide more space for the volume changes of the PANI particles. • The PANI/ACTBs exhibits high capacitance and the good cycling stability due to the combined advantages of PANI and ACTBs. • The PANI/ACTBs composite exhibits high energy density of 42 Wh kg−1. [ABSTRACT FROM AUTHOR]

• N-rich activated carbon was prepared from waste cotton. • The difference from the conventional KOH activation method is the addition of urea to the etching process. • The product exhibits better capacity, rate capability and lifetime in libs. • Larger surface area, suitable pore size, and high nitrogen content are key merits. With the advancement of battery technology, graphite as a negative electrode material for commercial lithium-ion batteries (LiBs) is reaching the limit of its capacity, and mesoporous carbon with a larger capacity is regarded as its best alternative. In this paper, waste cotton is used as the carbon source, and KOH and urea are used as pore formers and pore size regulators to prepare uniform mesoporous materials (N-PCC800) with a pore size distribution of 2–5 nm. Compared with the traditional KOH pore-making method, the addition of urea can adjust the pore size upward, thereby increasing the effective number of pores for Li+ insertion. While optimizing the structure, urea can also be used as an additional nitrogen source for the material to enrich the content of heteroatoms and defects, thereby increasing the amount of Li+ adsorbed by porous carbon. As an anode material, N-PCC800 exhibits a stable discharge capacity (1086 mAh g−1 at 100 mA g−1) far exceeding that of graphite. At a current density of 1000 mA g−1, there is still a capacity of 596 mAh g−1 remaining after 1000 cycles, indicating its advantages in rate performance and cycle performance. The optimized pore size and higher nitrogen content endow the carbon material with higher Li+ storage performance, and further kinetic analysis indicates that the increased capacity comes from the increased Li+ insertion. This work proposes a new pore size optimization scheme to obtain high-capacity mesoporous carbon, which provides an effective scheme for the reuse of waste cotton and cotton products and helps achieve the goal of carbon neutrality. [Display omitted] [ABSTRACT FROM AUTHOR]

A simple hydrothermal route is designed to decorate NiCo 2 S 4 nanoparticles on the surface of N-doped carbon nanotubes to form a coaxial composite (NiCo 2 S 4 @NCNT). Inherited the high electrical conductivity from the NCNT and high capacitive performance of NiCo 2 S 4 , the optimized NiCo 2 S 4 @NCNT composite could significantly reduce the contact resistance and effectively increase the transfer rate of ion and electron and thus benefit for its electrochemical performance enhancement. When employed as a battery-type supercapacitor electrode, the NiCo 2 S 4 @NCNT composite exhibits a high capacitance up to 783.5 C g −1 at 1 A g −1 and as well as rate performance (74.6% retention with the current density increases from 1 to 50 A g −1 ). Coupled with activated carbon (AC) negative electrode, the as-assembled hydride supercapacitor delivers a maximum energy density of 49.75 Wh kg −1 at a power density of 774.65 W kg −1 , as well as 88.9% capacitance retained after 3000 cycles at a current density of 10 A g −1 . These above results demonstrate the enormous potential of NiCo 2 S 4 @NCNT in the development of hybrid supercapacitors. [ABSTRACT FROM AUTHOR]

In this work, for the first time, we design a high-energy-density double-chamber capacitor which consists of the cathode chamber (polyaniline@carbon fiber cloth electrode in HCl/FeCl 3 solution), anion-exchange membrane and the anode chamber (polyaniline@carbon fiber cloth electrode in HCl/FeCl 2 solution). Since the redox state of polyaniline can be continuously altered by the external potential during charging and discharging process, the addition of FeCl 3 (or FeCl 2 ) in the electrolyte works as chemical oxidant (or reductant) to oxidize (or reduce) the reduced (or oxidized) polyaniline to offer extended capacitance. Results show the double-chamber supercapacitor has a high area specific capacitance of 1.22 F cm −2 and an energy density of 108.44 μWh cm −2 , which are ∼3.5 times as large as those of the conventional single-chamber capacitor (0.35 F cm −2 / 31.11 μWh cm −2 ). This work demonstrates an innovative strategy by incorporating supercapacitor with fuel cell to improve the energy density. [ABSTRACT FROM AUTHOR]

Porous Ni 2 P nanoflower supported on nickel foam (Ni 2 P@Ni foam) electrodes are synthesized via a simple hydrothermal growth strategy accompanied with further phosphating treatment. The prepared electrodes are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and transmission electron microscopy (TEM). Electro-catalytic performances towards urea electro-oxidation are tested by cyclic voltammetry (CV), chronoamperometry (CA) coupled with electrochemical impedance spectroscopy (EIS). By phosphating Ni(OH) 2 precursor, the final obtained Ni 2 P@Ni foam electrode presents a porous Ni 2 P nanoflower structure within abundant porosity, and so exposes a large amount of electro-catalytic active sites and electronic transmission channels to accelerate the interfacial reaction. Compared with Ni(OH) 2 @Ni foam precursor, the Ni 2 P@Ni foam catalyst exhibits more excellent electro-catalytic activity as well as lower onset oxidation potential. Remarkably, the Ni 2 P@Ni foam catalyst reaches a peak current density of 750 mA cm −2 with an onset oxidation potential of 0.24 V (vs. Ag/AgCl) accompanied by an excellent stability in 0.60 M urea with 5.00 M KOH solutions. Benefiting from the unique porous nanosheet structure, the as-synthesized Ni 2 P@Ni foam catalyst performs a highly enhanced catalytic behavior for alkaline urea electro-oxidation, indicating that the material can be hopefully applied in direct urea fuel cells. [ABSTRACT FROM AUTHOR]

Fe 3 O 4 nanospheres are synthesized by a solvothermal method with only one step under the assistance of surfactant. Fe 3 O 4 /C nanospheres are further fabricated by modifying Fe 3 O 4 nanospheres with glucose as carbon source. The crystalline structure and surface morphology are investigated by a combination of X-ray diffraction, Roman spectroscopy, transmission electron microscopy and scanning electron microscopy. The results suggest that cubic Fe 3 O 4 nanospheres are achieved, with a diameter around 200 nm. After the coating process, uniform carbon layer ~5 nm is formed on the surface of Fe 3 O 4 spheres. The electrochemical performances of prepared Fe 3 O 4 and Fe 3 O 4 /C nanospheres as anode materials for lithium-ion batteries are conducted via galvanostatic discharge/charge measurements and cyclic voltammetry. Under a current density of 100 mA g −1 , the Fe 3 O 4 /C nanospheres exhibit a delithiation capacity of 767.2 mAh g −1 over 100 cycles with excellent capacity retention of 98.2% and improved rate capacities, both of which are better than those of Fe 3 O 4 nanospheres. This work demonstrates that the prepared Fe 3 O 4 /C nanospheres can be a promising anode material for lithium ion batteries. [ABSTRACT FROM AUTHOR]

A current collector of reduced graphene oxide modified Ni foam (RN) is synthesized through a handy method of hydrothermal. The sheet-like reduced graphene oxide (rGO) wrapped around the skeleton of Ni foam establishes a unique structure of the current collector with large surface area as well as good electronic conductivity which make a positive effect on the promotion of electrochemical property. Pd is chosen as the catalyst and deposited on the RN substrate in a form of nanoparticle by potentiostatic electro-deposition. Characterization analysis including scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and inductive coupled plasma emission spectrometer (ICP) are conducted to investigate the morphology and structure of the final electrode of Pd nanoparticles decorated rGO supported on Ni foam (PRN). In 2 mol L −1 NaOH and 0.5 mol L −1 H 2 O 2 , a current density of 450 mA cm −2 is gained on the PRN electrode which is much larger than that on the electrode of Pd nanoparticles directly deposited on Ni foam (PN). An excellent stability of the PRN electrode is also concluded by the measurements revealing that this material can be potentially and widely applied to direct hydrogen peroxide fuel cell in the near future. [ABSTRACT FROM AUTHOR]

Aqueous magnesium ion battery as a new energy storage system is always explored due to excellent properties with high theoretical specific capacity, low-cost and safe aqueous electrolytes. However, the study on available material as anode in aqueous magnesium ion battery is very limited, which is the main reason that the kinetics of multivalent magnesium ions deinserted from the host material is very difficult. In this work, the nanoneedle FeVO 4 ·0.9H 2 O as available anode material is prepared and further modified by compositing with graphene. The FeVO 4 ·0.9H 2 O/Graphene composite exhibits the more excellent electrochemical performance, for example, the initial discharge capacity of FeVO 4 ·0.9H 2 O/Graphene electrode at the current density of 50 mAh g −1 in 1.0 mol L −1 MgSO 4 electrolyte is 183.8 mAh g −1 , but that of the FeVO 4 ·0.9H 2 O is 150.3 mAh g −1 . Therefore, the aqueous magnesium ion full battery is successfully assembled by FeVO 4 ·0.9H 2 O/Graphene as anode, 1.0 mol L −1 MgSO 4 as electrolyte and Mg-OMS-1 as cathode, which can obtain the discharge capacity of 53.1 mAh g −1 at a current density by calculate the total mass of two electrodes and the a high energy density of 58.5 Wh kg −1 . [ABSTRACT FROM AUTHOR]

Prussian Blue (PB) coordination compound is a well-known ideal candidate for energy storage due to its tunable open framework structure. Especially transition metal hexacyanoferrate displays excellent performance in supercapacitor. In this paper, a facile one-step co-precipitation synthesis method is developed to prepare hybrid K 2.25 Ni 0.55 Co 0.37 Fe(CN) 6 /CNTs composite, aiming at increasing the electric conductivity of electrode material by introducing carbon nanotube conductive skeleton to the Cobale-Nickel hexacyanoferrate hybrid nanoparticles. The TEM image shows that K 2.25 Ni 0.55 Co 0.37 Fe(CN) 6 presents nanoparticles with a diameter about 20 nm, which are connected along the surface of carbon nanotube. Such special structure could facilitate the electric transportation between each nanoscale K 2.25 Ni 0.55 Co 0.37 Fe(CN) 6 particle, efficiently improving the utilization of active material. Considering the intrinsic abundant channels for ions insertion/extraction of nanoparticles and good conductivity of carbon nanotubes, our creative electrode is expected to display fantastic supercapacitor performance. The electrochemical data demonstrate that the K 2.25 Ni 0.55 Co 0.37 Fe(CN) 6 /CNTs electrode exhibits a high specific capacitance of 600 F g −1 at 0.2 A g −1 and excellent rate performance of 90.4% when the current density ranged from 0.2 A g −1 to 5 A g −1 . Furthermore, the K 2.25 Ni 0.55 Co 0.37 Fe(CN) 6 /CNTs composite achieves decent cycling stability with maintaining 94% of its initial specific capacitance after 2000 discharge/charge cycles. The excellent energy storage property offers a great promise as supercapacitor materials. [ABSTRACT FROM AUTHOR]

An especial current collector of Ti pillar arrays (Ti Ps) is prepared by a facile hydrothermal etching method. The Ti Ps substrate can be applied in acidic medium for its excellent stability, and the large specific surface area of this substrate is highly beneficial to the contact between electrolyte and catalyst. Pd deposited on the Ti Ps substrate is selected to be the catalyst for H 2 O 2 reduction due to its remarkable electrocatalytic activity and stability. The structure and phase composition of the Pd modified Ti Ps (Pd@Ti Ps) electrode are studied through X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and inductive coupled plasma emission spectrometer (ICP). The electrocatalytic property of the Pd@Ti Ps electrode is studied through cyclic voltammetry (CV) and chronoamperometry (CA). According to the results, the Pd@Ti Ps electrode exhibits a high reduction current density of 220 mA cm −2 at −0.2 V in 2 mol L −1 H 2 SO 4 and 0.5 mol L −1 H 2 O 2 which is greatly larger than that on Pd modified Ti plate (Pd@Ti plate) electrode. The activation energy of H 2 O 2 reduction on this electrode is 19.77 kJ mol −1 . The low activation energy and high electrocatalytic activity indicate that the as-prepared electrode can be applied as a potential cathode for fuel cell. [ABSTRACT FROM AUTHOR]

Direct peroxide-peroxide fuel cell (DPPFC) employing with H 2 O 2 both as the fuel and oxidant is an attractive fuel cell due to its no intermediates, easy handling, low toxicity and expense. However, the major gap of DPPFC is the cathode performance as a result of the slow reaction kinetics of H 2 O 2 electro-reduction and thus the target issue is to design cathode catalysts with high performance and low cost. Herein, different with using noble metal of state-of-the-art, we have successfully synthesized ultra-fine Ni Fe ferrocyanide (NiFeHCF) nanoparticles (the mean particles size is 2.5 nm) through a co-precipitation method, which is used as the cathode catalyst towards H 2 O 2 reduction in acidic medium. The current density of H 2 O 2 reduction on the resultant NiFeHCF electrode after the 1800 s test period at −0.1, 0 and 0.1 V are 121, 93 and 76 mA cm 2 , respectively. Meanwhile, a single two-compartment DPPFC cell with NiFeHCF nanoparticles as the cathode and Ni/Ni foam as the anode is assembled and displayed a stable OCP of 1.09 V and a peak power density of 36 mW cm −2 at 20 °C, which is much higher than that of a DPPFC employed with Pd nano-catalyst as cathode. [ABSTRACT FROM AUTHOR]

A unique nanostructure electrode consisting of RuO 2 nanoparticles with ultra-fine diameter (1.9 nm) anchored on the surface of graphene nanosheets (GNS) and carbon nanotube (CNT) is prepared as a binder-free supercapacitor electrode through two-step electrochemical routes. At first, free-standing GNS and CNT (GC) are directly deposited on the surface of carbon fiber cloth (CFC) to form a cross-linked composite via a cathodic electrophoretic deposition method. Safranin, a kind of cationic organic dye, is introduced in this stage as a new-type dispersant to disperse GNS and CNT in water to form a suspension solution. After the following electro-deposition process, the as-prepared GC composite is uniform covered with RuO 2 nanoparticles. Benefiting from the combined advantages of GNS, CNT and ultra-fine RuO 2 nanoparticles in such a binder-free structure, the hybrid electrode exhibits a high specific capacitance up to 480.3 F g −1 (based on the total mass of GNS, CNT and RuO 2 ) and remarkable cycling stability (89.4% capacitance retention after 10000 cycles). Furthermore, the assembled symmetric supercapacitor exhibits a high energy density of 30.9 Wh kg −1 and power density of 14000 W kg −1 with excellent stability performance (92.7% capacitance retention after 10000 cycles). Thus, the remarkable performance of the resultant RuO 2 electrode has provided a rational design strategy for developing supercapacitors with high energy density. [ABSTRACT FROM AUTHOR]

Thorn-like Ni@TiC NAs and flake-like Co@TiC NAs electrodes without any conductive agent and binder are simply fabricated by the potentiostatic electrodeposition of Ni and Co catalysts on the TiC nanowire arrays (NAs). The electrocatalytic activity of H 2 O 2 oxidation on the Ni@TiC NAs electrodes is better than that on the Co@TiC NAs electrodes. The Ni@TiC NAs electrodes demonstrate a rough surface and have many nano-needles on the rod edges, which assures the high utilized efficiency of Ni catalysts. These particular three-dimensional structures may be very suitable for H 2 O 2 electrooxidation. The anodic current of Ni@TiC NAs anode reaches 0.32 A cm −2 at 0.3 V in 1.0 M H 2 O 2 + 4 M KOH solution. The DPFCs employing Ni@TiC NAs anodes display the peak power density of 30.2 mW cm −2 and open circuit voltage of 0.90 V at 85.1 mA cm −2 with desirable cell stability at 10 mL min −1 flow rate and 20 °C, which is much higher than those previously reported. [ABSTRACT FROM AUTHOR]

The 1D nanowire is prepared by in-situ etching current collector displaying faster electron transportation and better connection, plusing the directional charge transport properties, which could enable it become one of the most appropriate core of 3D core@shell structure. We apply novel nanowire-like Cu(OH) 2 , which is synthesized by etching copper foil, as core structure to be coated by novel NiOOH with high theoretical capacity. The fast electronic conductive core structure and promising faradic electrode material candidate material enable the Cu(OH) 2 @NiOOH/copper-foil electrode deliver high specific capacity of 1300 C g −1 at current density of 10 mA cm −2 and outstanding cycling stability of capacity retention of 88% after 10000 charge-discharge cycles, indicating the as-prepared Cu(OH) 2 @NiOOH/copper-foil electrode has potential application in electrochemical capacitors. [ABSTRACT FROM AUTHOR]

Aqueous magnesium-ion batteries have shown the desired properties of high safety characteristics, similar electrochemical properties to lithium and low cost for energy storage applications. The micro-sheet morphology of todorokite-type magnesium manganese oxide molecular sieve (Mg-OMS-1) material, which applies as a novel cathode material for magnesium-ion battery, is obtained by the simple hydrothermal method. The structure and morphology of the particles are confirmed by X-ray power diffraction, X-ray photoelectron spectroscopy, inductively coupled plasma, scanning and transmission electron microscopy. The electrochemical performance of Mg-OMS-1 is researched by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and constant current charge-discharge measurement. Mg-OMS-1 shows a good battery behavior for Mg 2+ insertion and deinsertion in the aqueous electrolyte. When discharging at 10 mA g −1 in 0.2 mol dm −3 MgCl 2 aqueous electrolyte, the initial discharge capacity reaches 300 mAh g −1 . The specific capacity retention rate is 83.7% after cycling 300 times at 100 mA g −1 in 0.5 mol dm −3 MgCl 2 electrolyte with a columbic efficiency of nearly 100%. [ABSTRACT FROM AUTHOR]

Recently, direct borohydride fuel cell (DBFC) has been considering as a promising energy conversion devices. During the development of DBFC, reducing the use of noble metals and increasing the anode performance are the hot topic in recent researches. In this article, reduced graphene oxide nanosheets deposit on C@TiC coaxial nanowire array (rGO-C@TiC) by means of a combine method of chemical vapor deposition and electrodeposition is chosen as 3D current collector for Pd nanoparticles deposition. The morphology and crystal structure of the as-obtained 3D electrode is checked with FESEM, TEM, EDS, and XRD. Results claim that the as-prepared 3D electrode exhibits a mushroom-like structure with the mean diameter size of Pd is 5.32 nm. Their catalytic ability for NaBH 4 electro-oxidation is evaluated in a three electrode system by using the method of cycle voltammetry and chronoamperometry, proving that the 3D Pd-rGO-C@TiC electrode has a higher catalytic performance. The oxidation current density of 1.35 A cm −2 mg −1 Pd is achieved at −0.6 V. Furthermore, a direct borohydride-hydrogen peroxide fuel cell (DBHPFC) is assembled by using the as-prepared Pd-rGO-C@TiC electrode and a Pd/CFC electrode as anode and cathode catalyst, respectively, and a maximum power density of 68.5 mW cm −2 is obtained. In addition, the assembled DBHPFC shows excellent higher performance based on the mass activity basis (1427.1 W g −1 ) among those reported literatures, indicating that our Pd-rGO-C@TiC could be acted as a promising cost-effective and ponderable alternative catalyst for NaBH 4 electrooxidation. [ABSTRACT FROM AUTHOR]

Carbon materials, especially graphene nanosheets (GNS) and/or multi-walled carbon nanotube (MWNT), have been widely used as electrode materials for supercapacitor due to their advantages of higher specific surface area and electronic conductivity, but the relatively low specific capacitance thus results in low energy density hindering their large applications. On the contrary, MnO 2 exhibits higher energy density but poor electrical conductivity. In order to obtain high performance supercapacitor electrode, here, combining the advantages of these materials, we have designed a facile two-step strategy to prepare 3D MnO 2 -GNS-MWNT-Ni foam (MnO 2 -GM-Ni) electrode. First, GNS and MWNT is wrapped on the surface of Ni foam (GM-Ni) via a “dip & dry” method by using an organic dye as a co-dispersant. Then, by using this 3D GM-Ni as substrate, MnO 2 nanoflakes are in-situ supporting on the surface of GNS and MWNT through a hydrothermal reaction. The specific capacitances of MnO 2 -GM-Ni electrode reach as high as 470.5 F g −1 at 1 A g −1 . Furthermore, we have successfully fabricated an asymmetric supercapacitor with MnO 2 -GM-Ni and GM-Ni as the positive and negative electrodes, respectively. The MnO 2 -GM-Ni//GM-Ni asymmetric supercapacitor exhibits a maximum energy density of 35.3 Wh kg −1 at a power density of 426 W kg −1 and also a favorable cycling performance that 83.8% capacitance retention after 5000 cycles. These results show manageable and high-performance which offer promising future for practical applications. [ABSTRACT FROM AUTHOR]

Ni(OH) 2 has been reported widely as one of the most promising supercapactior electrode materials due to its high specific capacitance, yet which were only based on low mass loading. Thus, it is desirable to promote supercapacitor performance for high mass loading Ni(OH) 2 through optimizing microstructure. In this work, we first prepared crossed ultrathin Ni(OH) 2 /ZnO nanoleafs directly grown on nickel foam via hydrothermal method, and then we produced pores on the nanoleafs by dissolving ZnO in alkaline solution. Definitely, this unique structure design for high mass loading binder-free Ni(OH) 2 electrode could benefit the penetration of electrolyte and the transportation of electrons, efficiently improving the supercapacitor performance. The obtained porous Ni(OH) 2 /NF electrode exhibits a mass specific capacity of 1142C g −1 based on 10 mg active materials, equating to a areal specific capaciy of 11.4C cm −2 , and pleasant cycling stability with retention of 85% of initial capacity after 10000 charge-discharge cycles. The fabricated asymmetric device shows a high energy density of 42 Wh kg −1 (4.73 mWh cm −3 ) at power density of 105 W kg −1 (17 mW cm −3 ). These results demonstrate the optimized structure makes the high mass loading binder-free Ni(OH) 2 /NF electrode could also display excellent supercapacitor performance. [ABSTRACT FROM AUTHOR]

Facile in-situ etching current collector prepares corresponding oxide or sulfide, which is directly used as faradic electrode material, supplying faster electron transportation and better connection, and thus displaying good supercapacitor performance. Here, we prepare Cu x S via etching copper foam and investigate the influence of etching time on the morphology and electrochemical performance. The results show that compared with the nano-rod Cu x S-1h/CF, nano-rod/wire Cu x S-2h/CF and block/nanorod Cu x S-4h/CF, the nano-rod/ribbon Cu x S-3h/CF electrode exhibits the highest specific capacity (448.8C g −1 at current density of 5 mA cm −2 ). We fabricate asymmetric supercapacitor based on Cu x S-3h/CF as positive electrode and AC as negative electrode to further evaluate the supercapacitor property and the device achieves a high energy density of 35 Wh kg −1 at power density of 266 W kg −1 . Furthermore, the outstanding cycling stability of 88% capacitance retention after 5000 charge-discharge cycles more enable the Cu x S-3h/CF become promising faradic electrode material. [ABSTRACT FROM AUTHOR]

Urea electro-oxidation reaction in alkaline medium is systematically analyzed by electrochemical impedance spectroscopy (EIS). The effects of polarization potential and KOH concentration on the impedance appearance are investigated. In the presence of urea, it is found that Nyquist plots exhibit two depressed semicircles, with one at higher frequencies stably locating in the first quadrant while the other’s location at lower frequencies varying between the first and second quadrant as the polarization potential changes. Results show both indirect and direct pathways proceed in urea electro-oxidation reaction. A mathematical model indicates the reverse loop in the Nyquist plots is attributed to CO 2 poisoning on the catalyst, which is also validated by the followed chronoamperometric method. Moreover, the rate determining steps of urea electro-oxidation reaction is dependent on KOH concentration. The EIS technique gives a new sight to interpret the poor stability of urea electro-oxidation on nickel catalyst, and thus helps to explore a CO 2 -insensitive catalyst. [ABSTRACT FROM AUTHOR]

Bimetallic nanoparticles with excellent activity and stability have been widely studied as H 2 O 2 electroreduction catalysts. Hereby, we have successfully found a green fabrication of high-stability Au-Pd nanoparticles directly supported on carbon fiber cloth (Au-Pd NPs/CFC) by using tobacco extract (nicotinamide) as a simple and ecofriendly reducing agent. Transmission electron microscopy, scanning electron microscopy, X-ray diffraction analyses and high angle annular dark field scanning TEM are performed to characterize the morphology, composition and structure of the as-prepared electrode. Results show that alloy nanoparticles prepared with different mole ratios of HAuCl 4 /PdCl 2 mixtures in the wide range of 10–100 nm have a uniform distribution on every carbon fiber, presenting a regular circle shape. The 3D electrode is directly applied as the electrocatalyst for H 2 O 2 reduction in acid solution and does not introduce into any polymer binders. The catalytic performance is investigated by chronoamperometry and voltammetry, exhibiting desired catalytic performance and improved utilization than other representative nanomaterials recently reported. Furthermore, Au-Pd NPs do not aggregate after the whole test due to the effect of in-situ immobilization, showing a great significance for the application in fuel cells. A direct peroxide-peroxide fuel cell (DPPFC) using Au-Pd NPs/CFC cathode with Ni/Ni-foam anode acquires a maximum power density of 22.8 mW cm −2 . Electrochemical stability test through long-term potential cycles ( > 9 h) further confirms the high durability of the electrode. [ABSTRACT FROM AUTHOR]

Three-dimensional (3D) reduced graphene networks (RGN) were successfully fabricated on Ni foam without any conductive agents and polymer binders by dipping commercial Ni foam into graphene oxide (GO) suspension and subsequent a electroreduction process in a buffer solution. Au nanoparticles were then deposited on the RGN through an electrodeposition process to form a novel reduced graphene networks-Au (RGNA) electrode. The morphology and phase structure of the RGNA electrode are characterized by scanning electron microscope, transmission electron microscope and X-ray diffraction spectrometer. The NaBH 4 electrooxidation performance on the RGNA electrode is investigated by means of cyclic voltammetry and chronoamperometry. The RGNA electrode owns special hierarchical porous structure, rapid electron and ion transport, and large electroactive surface area due to the intrinsic electronic conductivity, mesoporous nature of graphene. The RGNA electrode exhibits a good stability during the electrochemical process and the oxidation current density at RGNA electrode reached 500 mA cm −2 at 0 V in the solution containing 0.1 mol dm −3 NaBH 4 and 2 mol dm −3 NaOH, which is higher than that at bare Au–Ni foam without graphene. The excellent structural stability and high catalytic performance for NaBH 4 electrooxidation make the RGNA a promising material for future energy systems. [ABSTRACT FROM AUTHOR]

Nickel-cobalt nanowire arrays (Ni-Co NWAs) electrode is prepared by one-step galvanostatic electrodeposition with a polycarbonate membrane as the template. By adjusting the Co proportion in the Ni and Co bath solution into 10%, the optimal Ni-Co NWAs electrode in terms of relatively lower onset potential and highest current density towards urea electro-oxidation is obtained. Its catalytic performance is investigated by constructing single direct urea/hydrogen peroxide (H 2 O 2 ) fuel cell. Results show that a peak power density of 7.4 mW cm −2 and an open circuit voltage of 0.92 V are achieved at room temperature when 9.0 mol L −1 KOH and 0.33 mol L −1 urea are used as the anolyte, H 2 SO 4 and H 2 O 2 as the catholyte. Additionally, the urea/H 2 O 2 fuel cell also demonstrates excellent stability during short term duration test. [ABSTRACT FROM AUTHOR]

Urea peroxide as a solid-state fuel instead of liquid hydrogen peroxide is electro-catalytic oxidized by nickel nanowire arrays (NWAs) electrode. Nickel NWAs electrode is prepared by galvanostatically electrodepositing nickel into the pores and over-plating on the surface of polycarbonate template (PCT) from nickel bath solution. The NWAs are obtained after dissolving PCT in methylene chloride. Results show that urea peroxide decomposes into hydrogen peroxide and urea in aqueous solutions, then is electro-oxidized via two processes: i, hydrogen peroxide electro-oxidation at lower potential region; ii, both hydrogen peroxide and urea electro-oxidation at higher potential region. The onset oxidation potential and current density of urea peroxide electro-oxidation in 6.0 mol L −1 KOH and 1.0 mol L −1 urea peroxide are ca. -0.2 V and 700 mA cm −2 at 0.6 V, respectively. The nickel NWAs electrode demonstrates excellent stability for urea peroxide electro-oxidation under different polarization potentials. [ABSTRACT FROM AUTHOR]

Silver particles with microspheric structure are directly electrodeposited on carbon fiber cloth (CFC) substrate by square-wave potential electrodeposition method. The electrocatalytic behaviors of the Ag/CFC electrode toward hydrazine oxidation in alkaline solution are examined by cyclic voltammetry and chronoamperometry. An onset oxidation potential of -0.5 V and a peak current density of 30 mA cm −2 are achieved in the solution containing 1.0 mol L −1 KOH and 20.0 mmol L −1 hydrazine. The microspheric structure of the Ag/CFC electrode provides large electroactive surface area, hence, abundant active sites are vacant for hydrazine oxidation. The calculated apparent activation energies at different potentials show that hydrazine electro-oxidation at higher potential has faster kinetics than that at lower potential. In addition, the transfer electron number of hydrazine oxidation reaction on the Ag/CFC electrode is close to four, suggesting hydrazine is almost completely electrooxidized on the electrode and the full use of hydrazine fuel is basically achieved. [ABSTRACT FROM AUTHOR]

Herein, Polypyrrole was used as the conductive wrapping material electro-deposited on the MnO 2 nanoflakes covered on C/TiO 2 nanowire arrays to form PPy@MnO 2 @C/TiO 2 double shell/core structured arrays electrode for supercapacitor. Their structure and surface morphology were studied by using X-ray diffraction analysis, scanning electron microscopy and transmission electron microscopy. The results suggest that a thin layer of PPy was successfully wrapped on the surface of MnO 2 , and the shell/core structure of MnO 2 @C/TiO 2 nanowire arrays was not changed after electro-deposition of PPy. The electrochemical tests indicate that the PPy@MnO 2 @C/TiO 2 double shell/core arrays electrode exhibits high specific capacitance of 715 F g −1 at a charge/discharge current density of 1 A g −1 and improved specific capacitance retention to 84.0% after 1000 cycles. These results show that the unique three dimensional (3D) double shell/core structured electrode holds promise for high-performance energy storage devices. The superior capacitive perfomance may due to the unique 3D C/TiO 2 nanowires and the unique double shell/core structures. Firstly, the 3D C/TiO 2 nanowire arrays, as excellent platform for loading active materials, can facilitate the permeation of electrolyte. Moreover, the thin layer PPy tightly wrapped on the MnO 2 nanoflakes can improve the electrical conductivity of MnO 2 . Therefore, the PPy@MnO 2 @C/TiO 2 electrode is promising candidate for electrochemical energy applications. [ABSTRACT FROM AUTHOR]

M 1/3 Ni 1/3 Mn 2/3 O 2 (M = Mg or Zn) is sucessfully synthesize from Na 2/3 Ni 1/3 Mn 2/3 O 2 via a electrochemical conversion method. The structure and morphology of the as-prepared material are systematically characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), inductively coupled plasma atomic emission spectroscopy (ICP-AES) and X-ray photoelectron spectroscopy (XPS), respectively. The nano-sized morphology of M 1/3 Ni 1/3 Mn 2/3 O 2 is beneficial for the reduction of diffusion length and transfer acceleration of cations from the surface into the bulk interiors. XRD patterns reveal that crystal structure is maintained after the reversible Mg 2+ or Zn 2+ intercalation/deintercalation. Its performance for Mg 2+ and Zn 2+ intercalation/deintercalation in aquesous electrolytes is evaluated by cyclic voltammetry, galvanostatic cycling and electrochemical impedance spectroscopy. Mg 1/3 Ni 1/3 Mn 2/3 O 2 exhibits an initial capacity of 170.5 mAh g −1 in 1 mol L −1 Mg(NO 3 ) 2 , Zn 1/3 Ni 1/3 Mn 2/3 O 2 displays capacity of 113.7 mAh g −1 in 1 mol L −1 ZnSO 4 . Mg 1/3 Ni 1/3 Mn 2/3 O 2 shows a good cycling performance and maintains 52.7 mAh g −1 at 1.0C after 200 cycles in 1.0 mol L −1 MgSO 4 . [ABSTRACT FROM AUTHOR]

Pt-modified Co nanosheet@carbon sponge (Pt-Co NS@carbon sponge) electrode is synthesized via a facile sponge carbonization method coupled with a direct Co electrodeposition and Pt chemical-deposition. The obtained electrodes are characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and transmission electron microscopy (TEM). The catalytic performances of H 2 O 2 electroreduction in alkaline medium are investigated by cyclic voltammetry (CV), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS). The Pt-Co NS@carbon sponge electrode exhibits unique nanosheet structure on the three-dimensional (3D) porous network skeleton with a large surface area and displays excellent catalytic performance. The Pt-Co NS@carbon sponge electrode achieves a reduction current density of −1.38 A cm −2 mg −1 in 3.0 mol L −1 KOH and 1.5 mol L −1 H 2 O 2 at −0.50 V (vs. Ag/AgCl) accompanied with a desirable stability, which is significantly higher than the catalytic activity of H 2 O 2 electroreduction achieved previously with precious metals as catalysts. The impressive electrocatalytic performance is largely attributed to the superior 3D open structure and high electronic conductivity, which ensures the full utilization of Pt surfaces and makes the electrode have higher electrochemical activity. Original Pt-Co NS@carbon sponge electordes have a great potential for the application in fuel cells due to its facile preparation, high performance and low cost. [ABSTRACT FROM AUTHOR]