Search

Microfluidic paper-based analytical devices (μPADs) are emerging as powerful analytical platforms in clinical diagnostics, food safety, and environmental protection because of their low cost and favorable substrate properties for biosensing. However, the existing top-down fabrication methods of paper-based chips suffer from low resolution (200 μm). Additionally, papers have limitations in their physical properties (e.g., thickness, transmittance, and mechanical flexibility). Here, we demonstrate a bottom-up approach for the rapid fabrication of heterogeneously controlled paper-based chip arrays. We simply print a wax-patterned microchip with wettability contrasts, enabling automatic and selective assembly of cellulose microfibers to construct predefined paper-based microchip arrays with controllable thickness. This paper-based microchip printing technology is feasible for various substrate materials ranging from inorganic glass to organic polymers, providing a versatile platform for the full range of applications including transparent devices and flexible health monitoring. Our bottom-up printing technology using cellulose microfibers as the starting material provides a lateral resolution down to 42 ± 3 μm and achieves the narrowest channel barrier down to 33 ± 2 μm. As a proof-of-concept demonstration, a flexible paper-based glucose monitor is built for human health care, requiring only 0.3 μL of sample for testing.

We report the development of a distance-based paper analytical device combined with a hydrophilic bridge valve (B-dPAD) as a quantitative immunoassay method to monitor human interleukin-6 (IL-6) in human samples. Our device design features (i) a circular sample inlet zone, (ii) a circular capture zone with immobilized anti-IL-6 (anti-Ab

Uric acid (UA) is an important biomarker for many diseases. A sensitive point-of-care (POC) testing platform is designed for the digital quantification of salivary UA based on a colorimetric reaction on an easy-to-build smartphone-assisted microfluidic paper-based analytical device (SμPAD). UA levels are quantified according to the color intensity of Prussian blue on the SμPAD with the aid of a MATLAB code or a smartphone APP. A color correction method is specifically applied to exclude the light effect. Together with the engineering design of SμPADs, the background calibration function with the APP increases the UA sensitivity by 100-fold to reach 0.1 ppm with a linear range of 0.1-200 ppm. The assay time is less than 10 min. SμPADs demonstrate a correlation of 0.97 with a commercial UA kit for the detection of salivary UA in clinical samples. SμPADs provide a sensitive, fast, affordable, and reliable tool for the noninvasive POC quantification of salivary UA for early diagnosis of abnormal UA level-associated health conditions.

Food safety is an issue that cannot be ignored at any time because of the great impact of food contaminants on people's daily life, social production, and the economy. Because of the extensive demand for high-quality food, it is necessary to develop rapid, reliable, and efficient devices for food contaminant detection. Microfluidic paper-based analytical devices (μPADs) have been applied in a variety of detection fields owing to the advantages of low-cost, ease of handling, and portability. This review systematically discusses the latest progress of μPADs, including the fundamentals of fabrication as well as applications in the detection of chemical and biological hazards in foods, hoping to provide suitable screening strategies for contaminants in foods and accelerating the technology transformation of μPADs from the lab into the field.

Microfluidic paper-based analytical devices (μPADs) are emerging as prominent platform for disease detection, specifically in developing countries. This paper device offers simplicity and affordability not typically seen in centralized laboratory settings. However, detection limits in μPADs are inadequate and often require tests results to be read within a specific time interval to ensure accuracy. To overcome these challenges, we are developing an on-chip mass spectrometry (MS) detection strategy for immunoassays performed on paper substrates. Herein, we present our initial results from a proof-of-concept study toward the development of μPADs capable of storing immunoassay reagents within the confinements of the 3D device, automatic splitting of biofluid into four individual test zones, immuno-capture of disease biomarker, and on-chip MS detection of captured species. The reported study encourages the development of point-of-care and direct-to-customer testing using the disposable μPAD to collect samples, followed by sensitive analysis using portable mass spectrometers. We demonstrate this capability using malaria Plasmodium falciparum histidine-rich protein 2 (PfHRP2) antigen detection.

Target-responsive nanomaterials attract growing interest in the application of drug delivery, bioimaging, and sensing due to the responsive releasing of guest molecules by the smart molecule gate. However, it remains a challenge to develop smart nanomaterials with simple assembly and low nonspecific leakage starting from encapsulation strategies, especially in the sensing field. Herein, Au nanoclusters (Au NCs) were first grown on porous carbon derived from ZIF-8 (PCZIF) to be employed as nanocarriers. By employing the Au NCs as linkers and aptamer (Apta) double-strand hybrids (target Apta and SH-complementary DNA) as capping units, we reported the novel target-responsive nanomaterials of Apta/Au NCs-PCZIF/hemin through Au-S binding encapsulation for sensing assays. The Au-S binding encapsulation strategy simplified the packaging procedure and reduced non-target responsive leakage. As a proof, ochratoxin A (OTA) as a model target participates in the double-strand hybrid competitive displacement reaction and triggered Apta conformation switches from a coil to a G-quadruplex structure accompanied by the dissociation of the gatekeeper. Simultaneously, the released hemin can initiate a self-assembly to form G-quadruplex/hemin DNAzyme. Interestingly, owing to DNAzyme providing electron transfer mediators and peroxidase-like activity, we proposed an electrochemical/colorimetric dual-mode paper-based analytical device (PAD) that provided self-verification to enhance reliability and accuracy, benefiting from independent signal conversion and transmission mechanism. As a consequence, the proposed dual-mode PAD could achieve sensitive electrochemical detection and visual prediction of OTA in the range of 1 pg/mL to 500 ng/mL and 50 pg/mL to 500 ng/mL, respectively. The electrochemical detection limit for OTA was as low as 0.347 pg/mL (

The exact fabrication of precise three-dimensional structures for piezoresistive sensors necessitates superior manufacturing methods or tooling, which are accompanied by time-consuming processes and the potential for environmental harm. Herein, we demonstrated a method for

Graphene paper (GP), a macroscopic self-supporting material, has exceptional flexibility and preserves the excellent physical and chemical properties of graphene nanomaterials. But its applications in regenerative medicine remain to be further explored. Here, we biologically functionalized GP with hydroxyapatite (HA) nanorods by the use of GP-binding peptides as an affinity linker. This strategy solved two daunting challenges for regenerative medicine applications of GP: the lack of good hydrophilicity for supporting cell growth and the difficulty in forming composites by binding with nanobiomaterials. Briefly, we first screened a high-affinity GP-binding peptide (TWWNPRLVYFDY) by the phage display technique. Then we chemically conjugated the GP-binding peptide to the synthetic HA nanorods. The GP-binding peptide on the resultant HA nanorods enabled them to be bound and assembled onto the GP substrate with high affinity, forming a GP-peptide-HA composite with significantly improved hydrophilicity of GP. The composite promoted the attachment and proliferation of mesenchymal stem cells (MSCs), demonstrating its outstanding biocompatibility. Due to the unique compositions of the composite, it was also found to induce osteogenic differentiation of MSCs in vitro in the absence of other inducers in the medium, by verifying the expression of the osteogenic markers including collagen-1, bone morphogenetic proteins 2, runx-related transcription factor 2, osteocalcin, and alkaline phosphatase. Our work suggests that the GP-binding peptide can be used to link inorganic nanoparticles onto GP to facilitate the biomedical applications of GP.

Illicit drug use causes over half a million deaths worldwide every year. Drugs of abuse are commonly smuggled through customs and border checkpoints and, increasingly, through parcel delivery services. Improved methods for detection of trace drug residues from surfaces are needed. Such methods should be robust, fieldable, sensitive, and capable of detecting a wide range of drugs. In this work, commercially produced paper with a pressure-sensitive adhesive coating was utilized for the collection and analysis of trace drug residues by paper spray mass spectrometry (MS). This modified substrate was used to combine sample collection of drug residues from surfaces with rapid detection using a single paper spray ticket. The all-in-one ticket was used to probe different surfaces commonly encountered in forensic work including clothing, cardboard, glass, concrete, asphalt, and aluminum. A total of 10 drugs (acetyl fentanyl, fentanyl, clonazolam, cocaine, heroin, ketamine, methamphetamine, methylone, U-47700, and XLR-11) were evaluated and found to be detectable in the picogram range using a benchtop mass spectrometer and in the low nanogram range using a portable ion trap MS. The novel approach demonstrates a simple yet effective sampling strategy, allowing for rapid identification from difficult surfaces via paper spray mass spectrometry.

Timely and rapid detection of biomarkers is extremely important for the diagnosis and treatment of diseases. However, going to the hospital to test biomarkers is the most common way. People need to spend a lot of money and time on various tests for potential disease detection. To make the detection more convenient and affordable, we propose a paper-based aptasensor platform in this work. This device is based on a cellulose paper, on which a three-electrode system and microfluidic channels are fabricated. Meanwhile, novel nanomaterials consisting of amino redox graphene/thionine/streptavidin-modified gold nanoparticles/chitosan are synthesized and modified on the working electrode of the device. Through the biotin-streptavidin system, the aptamer whose 5'end is modified with biotin can be firmly immobilized on the electrode. The detection principle is that the current generated by the nanomaterials decreases proportionally to the concentration of targets owing to the combination of the biomarker and its aptamer. 17β-Estradiol (17β-E2), as one of the widely used diagnostic biomarkers of various clinical conditions, is adopted for verifying the performance of the platform. The experimental results demonstrated that this device enables the determination of 17β-E2 in a wide linear range of concentrations of 10 pg mL-1 to 100 ng mL-1 and the limit of detection is 10 pg mL-1 (S/N = 3). Moreover, it enables the detection of targets in clinical serum samples, demonstrating its potential to be a disposable and convenient integrated platform for detecting various biomarkers.

This work describes the development of a system that combines a derivatization protocol based on the Katritzky reaction with paper spray ionization mass spectrometry (PSI-MS) for the analysis of amino acid neurotransmitters in mouse brain tissues. The system is relatively simple, consisting of spraying the derivatization solution onto a mouse brain section mounted on a glass slide, applying a small volume of solvent to moisten the sample, pressing a triangular paper onto the sample surface to transfer the sample constituents to the paper surface, and using the paper as a substrate for PSI-MS analysis. The Katritzky reaction facilitated the ionization of the amino acids by reacting a pyrylium salt with the amino group of the analytes, forming very stable pyridinium cations, which greatly increased the sensitivity of the PSI-MS analysis. Most of the intensities of the amino acids modified by the Katritzky reaction were more than 10 times greater than the nonderivatized ones. The system was applied for the analysis of brain sections obtained from mice with Parkinson's disease, and the amino acids gamma-aminobutyric acid (GABA) and glycine (Gly), two compounds very well-known in studies of Parkinson's disease, were readily detected. The results suggest that the Katritzky reaction combined with PSI-MS might offer a significant advance in the knowledge on protocols that improve the sensitivity of detection of crucial biological compounds.

In this work, we fabricated a novel origami paper-based analytical device (oPAD) assisted by the nanostructuring effect of in situ Pd decoration of Cu/Co-doped CeO2 (CuCo-CeO2-Pd) nanospheres, functionalized with their strongly enhanced electrocatalytic properties to realize an electrochemical and visual signal readout system in oPAD, for highly sensitive detection of amyloid-β (Aβ). The CuCo-CeO2-Pd nanospheres were introduced as an enhanced "signal transducer layer" on account of the electron transfer acceleration caused by catalyzing glucose to produce H2O2 for differential pulse voltammetry signal readout and further 3,3'5,5'-tetramethylbenzidine (TMB) oxidation for colorimetric analysis. Meanwhile, for achieving superior performance of the proposed oPAD, in situ growth of urchin-like gold nanoparticles (Au NPs) onto cellulose fibers was adopted to improve "the recognition layer" in favor of immobilizing antibodies for targeting Aβ through specific antigen-antibody interactions. Combined with the delicate design of oPAD, exhibiting actuation of the conversion procedure between hydrophobicity and hydrophilicity on paper tabs in the assay process, the oPAD successfully enabled sensitive diagnosis of Aβ in a linear range from 1.0 pM to 100 nM with a limit of detection of 0.05 pM (S/N = 3) for electrochemical detection, providing a reliable strategy for quantifying the Aβ protein in clinical applications. Ministry of Education (MOE) This work was financially supported by the Science and Technology Projects of University of Jinan (XKY2002), the Natural Science Foundation of Shandong Province (ZR2020MB057), the Singapore Ministry of Education (MOE AcRF Tier 1 RG176/16), the Taishan Scholars Program, the Case-by-Case Project for Top Outstanding Talents of Jinan, and the project of "20 Items of University" of Jinan (2018GXRC001).

Hypoxia is a nonphysiological oxygen tension which is common in most malignant tumors. Hypoxia stimulates complicated cell signaling networks in cancer cells, e.g., the HIF, PI3K, MAPK, and NFκB pathways. Then, cells release a number of cytokines such as VEGFA to promote the growth of peripheral blood vessels and lead to metastasis. In the current work, understanding of the internal hypoxic environment in solid tumor tissue was attempted by developing a folding paper system. A paper-based solid tumor was constructed by folding a filter paper cultured with cancer cells. The cellular response in each layer could be analyzed by disassembling the folded paper after the culture course. The result showed that an internal hypoxic environment was successfully reproduced in the paper-based solid tumor. The cells in the inner layer expressed high levels of HIF1-α and VEGFA. Hence, proliferation and migration of endothelial cells were shown to be induced by the cells located in the internal hypoxic environment. Moreover, the paper-based solid tumor was transplanted into nude mice for the study of hypoxic response and angiogenesis. The crosstalk between internal and external parts of solid tumor tissue could be analyzed by sectioning each layer of the paper-based solid tumor. This approach provides a favorable analytical method for the discovery of the interaction between cancer cells, hypoxia, and peripheral angiogenesis.

Cellulose nanopaper (CNP) has been considered as a promising material with great application potential in diverse fields. However, the hydrophilic nature of CNP significantly limits its practical application. In order to improve its water resistance, we demonstrate a facile approach to functionalize CNP by impregnating it with chitosan (CS), followed by in situ polymerization of polypyrrole (PPy). The results indicate that the obtained CNP/CS/PPy shows excellent water resistance with the wet tensile strength of up to 80 MPa, which is more than 10 times higher than that of the pure CNP. Intriguingly, new features (e.g., electrical conductivity, antibacterial activity, and so forth) are achieved at the same time. The functionalized CNP/CS/PPy shows a high conductivity of 6.5 S cm-1, which can be used for electromagnetic interference shielding applications with a high shielding performance of around 18 dB. In addition, the CNP/CS/PPy exhibits good antibacterial activity toward Staphylococcus aureus and Escherichia coli, with the bacterial reductions of 99.28 and 95.59%, respectively. Thus, this work provides a simple and versatile approach to functionalize CNP for achieving multifunctional properties.

Isothermal amplification strategies capable of rapid, inexpensive, and accurate nucleic acid detection provide new options for large-scale pathogen detection, disease diagnosis, and genotyping. Here we report a highly sensitive multicomponent XNA-based nucleic acid detection platform that combines analyte preamplification with X10-23-mediated catalysis to detect the viral pathogen responsible for COVID-19. The platform, termed RNA-Encoded Viral Nucleic Acid Analyte Reporter (REVEALR), functions with a detection limit of ≤20 aM (∼10 copies/μL) using conventional fluorescence and paper-based lateral flow readout modalities. With a total assay time of 1 h, REVEALR provides a convenient nucleic acid alternative to equivalent CRISPR-based approaches, which have become popular methods for SARS-CoV-2 detection. The assay shows no cross-reactivity for other in vitro transcribed respiratory viral RNAs and functions with perfect accuracy against COVID-19 patient-derived clinical samples.

Novel ways to track and verify items of a high value or security is an ever-present need. Taggants made from deoxyribonucleic acid (DNA) have several advantageous properties, such as high information density and robust synthesis; however, existing methods require laboratory techniques to verify, limiting applications. Here, we leverage DNA nanotechnology to create DNA taggants that can be validated in the field in seconds to minutes with a simple equipment. The system is driven by toehold-mediated strand-displacement reactions where matching oligonucleotide sequences drive the generation of a fluorescent signal through the potential energy of base pairing. By pooling different "input" oligonucleotide sequences in a taggant and spatially separating "reporter" oligonucleotide sequences on a paper ticket, unique, sequence-driven patterns emerge for different taggant formulations. Algorithmically generated oligonucleotide sequences show no crosstalk and ink-embedded taggants maintain activity for at least 99 days at 60 °C (equivalent to nearly 2 years at room temperature). The resulting fluorescent signals can be analyzed by the eye or a smartphone when paired with a UV flashlight and filtered glasses.

Cell-free expression systems have drawn increasing attention as a tool to achieve complex biological functions outside of the cell. Several applications of the technology involve the delivery of functionality to challenging environments, such as field-forward diagnostics or point-of-need manufacturing of pharmaceuticals. To achieve these goals, cell-free reaction components are preserved using encapsulation or lyophilization methods, both of which often involve an embedding of components in porous matrices like paper or hydrogels. Previous work has shown a range of impacts of porous materials on cell-free expression reactions. Here, we explored a panel of 32 paperlike materials and 5 hydrogel materials for the impact on reaction performance. The screen included a tolerance to lyophilization for reaction systems based on both cell lysates and purified expression components. For paperlike materials, we found that (1) materials based on synthetic polymers were mostly incompatible with cell-free expression, (2) lysate-based reactions were largely insensitive to the matrix for cellulosic and microfiber materials, and (3) purified systems had an improved performance when lyophilized in cellulosic but not microfiber matrices. The impact of hydrogel materials ranged from completely inhibitory to a slight enhancement. The exploration of modulating the rehydration volume of lyophilized reactions yielded reaction speed increases using an enzymatic colorimetric reporter of up to twofold with an optimal ratio of 2:1 lyophilized reaction to rehydration volume for the lysate system and 1.5:1 for the purified system. The effect was independent of the matrices assessed. Testing with a fluorescent nonenzymatic reporter and no matrix showed similar improvements in both yields and reaction speeds for the lysate system and yields but not reaction speeds for the purified system. We finally used these observations to show an improved performance of two sensors that span reaction types, matrix, and reporters. In total, these results should enhance efforts to develop field-forward applications of cell-free expression systems.

On-site detection of multiple small-molecule analytes in complex sample matrixes would be highly valuable for diverse biosensing applications. Paper electrochemical devices (PEDs) offer an especially appealing sensing platform for such applications due to their low cost, portability, and ease of use. Using oligonucleotide-based aptamers as biorecognition elements, we here for the first time have developed a simple, inexpensive procedure for the fabrication of aptamer-modified multiplex PEDs (mPEDs), which can robustly and specifically detect multiple small molecules in complex samples. These devices are prepared via an ambient vacuum filtration technique using carbon and metal nanomaterials that yields precisely patterned sensing architecture featuring a silver pseudo-reference electrode, a gold counter electrode, and three gold working electrodes. The devices are user-friendly, and the fabrication procedure is highly reproducible. Each working electrode can be readily modified with different aptamers for sensitive and accurate detection of multiple small-molecule analytes in a single sample within seconds. We further demonstrate that the addition of a PDMS chamber allows us to achieve detection in microliter volumes of biological samples. We believe this approach should be highly generalizable, and given the rapid development of small-molecule aptamers, we envision that facile on-site multi-analyte detection of diverse targets in a drop of sample should be readily achievable in the near future.

Flexible paper-based sensors may be applied in numerous fields, but this requires addressing their limitations related to poor thermal and water resistance, which results in low service life. Herein, we report a paper-based composite sensor composed of carboxylic carbon nanotubes (CCNTs) and poly-m-phenyleneisophthalamide (PMIA), fabricated by a facile papermaking process. The CCNT/PMIA composite sensor exhibits an ability to detect pressures generated by various human movements, attributed to the sensor's conductive network and the characteristic "mud-brick" microstructure. The sensor exhibits the capability to monitor human motions, such as bending of finger joints and elbow joints, speaking, blinking, and smiling, as well as temperature variations in the range of 30-90 °C. Such a capability to sensitively detect pressure can be realized at different applied frequencies, gradient sagittas, and multiple twists with a short response time (104 ms) even after being soaked in water, acid, and alkali solutions. Moreover, the sensor demonstrates excellent mechanical properties and hence can be folded up to 6000 times without failure, can bear 5 kg of load without breaking, and can be cycled 2000 times without energy loss, providing a great possibility for a long sensing life. Additionally, the composite sensor shows exceptional Joule heating performance, which can reach 242 °C in less than 15 s even when powered by a low input voltage (25 V). From the perspective of industrialization, low-cost and large-scale roll-to-roll production of the paper-based sensor can be achieved, with a formed length of thousands of meters, showing great potential for future industrial applications as a wearable smart sensor for detecting pressure and temperature, with the capability of electric heating.

The plasmonic properties of gold nanoparticles (AuNPs) are a promising tool to develop sensing alternatives to traditional, enzyme-catalyzed reactions. The need for sensing alternatives, especially in underdeveloped areas of the world, has given rise to the application of nonenzymatic sensing approaches paired with cellulosic substrates to biochemical analysis. Herein, we present three individual, low-step, wet-chemistry, colorimetric assays for three target biomarkers, namely, glucose, uric acid, and free cholesterol, relevant in diabetes control and their translation into paper-based assays and microfluidic platforms for multiplexed analysis. For glucose determination, an in situ AuNPs synthesis approach was applied into the developed μPAD, giving semiquantitative measures in the physiologically relevant range. For uric acid and cholesterol determination, modified AuNPs were used to functionalize paper with a gold-on-paper approach with the optical properties changing based on different aggregation degrees and hydrophobic properties of particles dependent on analyte concentration. These paper-based assays show sensitivity ranges and limits of detection compatible for target analyte level determination and detection limits comparable to those of similar enzymatic, colorimetric systems, relying only on plasmonic transduction without the need for enzymatic activity or other chromogenic substrates. The resulting paper-based assays were integrated into a single 3D, multiplex paper-based device using paper microfluidics, showing the capability for performing different colorimetric assays with distinct requirements in terms of sample flow and sample uptake in test zones using a combination of both horizontal and vertical flows inside the same device. The presented device allows for multiparametric, colorimetric measures of different metabolite levels from a single complex sample matrix drop using digital color analysis, showing the potential for development of low-cost, low-complexity tools for diagnostics toward the point-of-care.

Whatman No. 1 chromatography paper is widely used as a substrate for cellulose-based immunoassays. The immobilized proteins are used to capture target biomarkers for detection. However, alternative paper substrates may facilitate mass production of immunoassays as diagnostic tests. Here, we assessed the physical characteristics and protein immobilization capabilities of different commercial papers. Some substrates fulfilled our design criteria, including adequate flow rate and sufficient protein immobilization for efficient target capture. This study demonstrates that a variety of paper substrates can be bioactivated and used to capture target biomarkers, enabling development of affordable diagnostic tests from a range of starting materials.

Paper-based microfluidic devices are popular for their ability to automate multistep assays for chemical or biological sensing at a low cost, but the design of paper microfluidic networks has largely relied on experimental trial and error. A few mathematical models of flow through paper microfluidic devices have been developed and have succeeded in explaining experimental flow behavior. However, the reverse engineering problem of designing complex paper networks guided by appropriate mathematical models is largely unsolved. In this article, we demonstrate that a two-dimensional paper network (2DPN) designed to sequentially deliver three fluids to a test zone on the device can be computationally designed and experimentally implemented without experimental trial and error. This was accomplished by three new developments in modeling flow through paper networks: (i) coupling of the Richards equation of flow through porous media to the species transport equation, (ii) modeling flow through assemblies of multiple paper materials (test membrane and wicking pad), and (iii) incorporating limited-volume fluid sources. We demonstrate the application of this model in the optimal design of a paper-based signal-enhanced immunoassay for a malaria protein, PfHRP2. This work lays the foundation for the development of a computational design toolbox to aid in the design of paper microfluidic networks. ©

This paper introduces a novel potential-resolved paper-based biosensor for simultaneous detection of multiple microRNAs (miRNAs) (taking miRNA-155 and miRNA-126 as examples) based on the bipolar electrode (BPE) electrochemiluminescence (ECL) strategy. The proposed multiple-channel paper-based sensing microfluidic platform was prepared by wax-printing technology, screen-printing method, and in situ Au nanoparticles (AuNPs) growth to form hydrophilic areas, hydrophobic boundaries, waterproof electronic bridge, driving electrode regions, and parallel bipolar electrode regions. CdTe quantum dots (QDs)-H2 and Au@g-C3N4 nanosheets (NSs)-DNA1 were used as dual electrochemiluminescence signal probes, and carboxylated Fe3O4 magnetic nanoparticles existed as carriers. CdTe QDs-H2/S2O82- and Au@g-C3N4 NSs-DNA1/S2O82- could exhibit two strong and stable ECL emissions at a drive voltage of 9 and 12 V, respectively, which can be used as effective potential-resolved signal tags. In addition, the proposed three-dimensional (3D) DNA nanomachine model and the target miRNA cycle strategy were used to achieve double amplification of electrochemiluminescence intensity. More importantly, the combination of the bipolar electrode system and the potential-resolved multitarget electrochemiluminescence method can greatly reduce the spatial interference between substances. The prepared ECL biosensor showed a favorable linear response for the detection of miRNA-155 and miRNA-126 with relatively low detection limits of 5.7 and 4.2 fM, respectively. With excellent sensitivity, the strategy may provide an efficient method for clinical application, especially in detection of trace multiple targets.

Tuberculosis (TB), one of the deadliest infectious diseases, is caused by Mycobacterium tuberculosis (MTB) and remains a public health problem nowadays. Conventional MTB DNA detection methods require sophisticated infrastructure and well-trained personnel, which leads to increasing complexity and high cost for diagnostics and limits their wide accessibility in low-resource settings. To address these issues, we have developed a low-cost photothermal biosensing method for the quantitative genetic detection of pathogens such as MTB DNA on a paper hybrid device using a thermometer. First, DNA capture probes were simply immobilized on paper through a one-step surface modification process. After DNA sandwich hybridization, oligonucleotide-functionalized gold nanoparticles (AuNPs) were introduced on paper and then catalyzed the oxidation reaction of 3,3',5,5'-tetramethylbenzidine (TMB). The produced oxidized TMB, acting as a strong photothermal agent, was used for the photothermal biosensing of MTB DNA under 808 nm laser irradiation. Under optimal conditions, the on-chip quantitative detection of the target DNA was readily achieved using an inexpensive thermometer as a signal recorder. This method does not require any expensive analytical instrumentation but can achieve higher sensitivity and there are no color interference issues, compared to conventional colorimetric methods. The method was further validated by detecting genomic DNA with high specificity. To the best of our knowledge, this is the first photothermal biosensing strategy for quantitative nucleic acid analysis on microfluidics using a thermometer, which brings fresh inspirations on the development of simple, low-cost, and miniaturized photothermal diagnostic platforms for quantitative detection of a variety of diseases at the point of care.

Development of selective and sensitive methods for on-site assay of tetracycline (TC) is of great significance for public health and food safety. Herein, a valid ratiometric fluorescence strategy using g-C3N4 nanosheets coupled with Eu3+ is designed for the assay of TC. In this strategy, both Eu3+ and g-C3N4 nanosheets serve as the recognition units of TC. The blue fluorescence of g-C3N4 nanosheets can be quenched by TC via the inner filter effect (IFE); meanwhile, the red fluorescence of Eu3+ can be enhanced by TC through the antenna effect (AE). The synergistic effect of AE and IFE caused by TC makes the developed ratiometric fluorescent sensor display a wide linear range for TC from 0.25 to 80 μM with a detection limit of 6.5 nM and a significant fluorescence color evolution from blue to red. Given its simplicity, free-label, excellent selectivity, high sensitivity, and recognizable color change, point-of-care testing systems, including smartphones and test paper-based assays, are developed for the visual sensing of TC. The integration of smartphones and test paper on a ratiometric fluorescent sensor greatly reduces the detection cost and time, providing a promising method for the qualitative discernment and semi-quantitative assay of TC on-site. Moreover, the potential application of the approach is also verified by detecting TC in milk.

Multilayered and stacked cellulose paper has emerged as a promising platform for construction of three-dimensional (3D) cell culture because of its low cost, good biocompatibility, and high porosity. However, its poor light transmission makes it challenging to directly and clearly monitor cell behaviors (e.g., growth and proliferation) on the paper-based platform using an optical microscope. In this work, we developed a transparent microcrystalline cellulose/polyvinyl alcohol (MCC/PVA) paper with irregular pores through dissolution and regeneration of microcrystalline nanocellulose, addition of a porogen reagent (NaCl), and subsequently dipping in PVA solutions. The transparent MCC paper displays high porosity (up to 90%), adjustable pore size (between 23 and 46 μm), large thickness (from 315 to 436 μm), and high light transmission under water (95%). Through further modification of the transparent MCC paper with PVA, the obtained transparent MCC/PVA paper shows enhanced mechanical properties (dry and wet strengths), good hydrophilicity (with a contact angle of 70.8°), and improved biocompatibility (cell viability up to 90%). By stacking and destacking multiple layers of the transparent MCC/PVA paper, it has been used for both two-dimensional and three-dimensional cell culture platforms. The transparent MCC/PVA paper under water enables both direct observation of cell morphology by an optical microscope via naked eyes and fluorescence microscope after staining. We envision that the developed transparent MCC/PVA paper holds great potential for future applications in various bioanalytical and biomedical fields, such as drug screening, tissue engineering, and organ-on-chips.

A soft body area sensor network presents a promising direction in wearable devices to integrate on-body sensors for physiological signal monitoring and flexible printed circuit boards (FPCBs) for signal conditioning/readout and wireless transmission. However, its realization currently relies on various sophisticated fabrication approaches such as lithography or direct printing on a carrier substrate before attaching to the body. Here, we report a universal fabrication scheme to enable printing and room-temperature sintering of the metal nanoparticle on paper/fabric for FPCBs and directly on the human skin for on-body sensors with a novel sintering aid layer. Consisting of polyvinyl alcohol (PVA) paste and nanoadditives in the water, the sintering aid layer reduces the sintering temperature. Together with the significantly decreased surface roughness, it allows for the integration of a submicron-thick conductive pattern with enhanced electromechanical performance. Various on-body sensors integrated with an FPCB to detect health conditions illustrate a system-level example.

Conventional mass spectrometry (MS)-based analytical methods for small carbohydrate fragments (oligosaccharides, degree of polymerization 2–12) are time-consuming due to the need for offline sample pretreatment such as desalting. Herein, we report a new paper spray ionization method, named desalting paper spray (DPS), which employs a piece of triangular filter paper for both sample desalting and ionization. Unlike regular paper spray ionization (PSI) and nano electrospray ionization (nanoESI), DPS-MS allows fast and sensitive detection of oligosaccharides in biological samples having complex matrices (e.g., Tris, PBS, HEPES buffers or urine). When oligosaccharide sample is loaded onto the filter paper substrate (10 mm × 5 mm, height × base) made mostly of cellulose, oligosaccharides adsorb on the paper via hydrophilic interactions between oligosaccharides and cellulose. Salts and buffers can be washed away using an ACN/H(2)O (90/10 v/v) solution, While oligosaccharides can be eluted from the paper using a solution of ACN/H(2)O/formic acid (FA) (10/90/1 v/v/v) and directly spray-ionized from the tip of the paper. Various saccharides at trace levels (e.g., 50 fmol) in nonvolatile buffer can be quickly analyzed by DPS-MS (< 5 min per sample). DPS-MS is also applicable for direct detection of oligosaccharides from glycosyltransferase (GT) reactions, a challenging task which typically requires radioactive assay. Quantitative analysis of acceptor and product oligosaccharides shows increased product with increased GT enzymes used for the reaction, a result in line with radioactivity assay. This work suggests that DPS-MS has potential for rapid oligosaccharides analysis from biological samples.

Diabetes mellitus is one of the most common chronic diseases worldwide. Generally, the levels of fasting or postprandial blood glucose and other biomarkers, such as glycated albumin, glycated hemoglobin, and 1,5-anhydroglucitol, are used to diagnose or monitor diabetes progression. In the present study, we developed a sensor to simultaneously detect the glucose levels and glycation ratios of human serum albumin using a lateral flow assay. Based on the specific enzymatic reactions and immunoassays, a spiked glucose solution, total human serum albumin, and glycated albumin were measured simultaneously. To test the performance of the developed sensor, clinical serum samples from healthy subjects and patients with diabetes were analyzed. The glucose level and glycation ratios of the clinical samples were determined with reasonable correlation. The R-squared values of glucose level and glycation ratio measurements were 0.932 and 0.930, respectively. The average detection recoveries of the sensor were 85.80% for glucose and 98.32% for the glycation ratio. The glucose level and glycation ratio in our results were crosschecked with reference diagnostic values of diabetes. Based on the outcomes of the present study, we propose that this novel platform can be utilized for the simultaneous detection of glucose and glycation ratios to diagnose and monitor diabetes mellitus.

As a global shift continues to occur in high burden diseases toward developing countries, the importance of medical diagnostics based on point-of-care testing (POCT) is rapidly increasing. However, most diagnostic tests that meet clinical standards rely on high-end analyzers in central hospitals. Here, we report the development of a simple, low-cost, mass-producible, highly sensitive/quantitative, automated, and robust paper/soluble polymer hybrid-based lateral flow biosensing platform, paired with a smartphone-based reader, for high-performance POCT. The testing architecture incorporates a polymeric barrier that programs/automates sequential reactions via a polymer dissolving mechanism. The smartphone-based reader with simple opto-mechanical parts offers a stable framework for accurate quantification. Analytical performance of this platform was evaluated by testing human cardiac troponin I (cTnI), a preferred biomarker for the diagnosis of myocardial infarction, in serum/plasma samples. Coupled with catalytic/colorimetric gold-ion amplification, this platform produced results within 20 min with a detection limit of 0.92 pg mL

Paper is emerging as a versatile platform for automated fluid handling with a broad range of applications in medical diagnostics and analytical chemistry. However, selectively controlling analyte transport in paper to achieve concentration or selection has been a challenge for functional analysis. Here, by combining paper-based microfluidics with acoustics, we present a rapid and powerful method to size dependently control movement of microparticles and cells in paper using surface acoustic waves (SAW). We demonstrate the unique capability of the paper-based SAW approach to trap and concentrate microparticles in paper and release them when required, achieving collection efficiency of over 98%. Given the correlation between collection efficiency, size, and applied power, the paper-based SAW approach is applied to isolate a mixture of microparticles (1.1, 3.2, and 5 μm in diameter) into different regions and also to trap and concentrate human prostate cancer PC3 cells at a predetermined site. This paper-based SAW approach provides opportunities to develop powerful and low-cost selection and analysis tools, capable of processing complex multicomponent samples, with potential applications in medical diagnostics.

Lithium carbonate is an effective medicine for the treatment of the bipolar disorder, but the concentration of lithium in the patient's blood must be frequently monitored because of its toxicity. To date, no colorimetric methods of lithium ion detection in whole blood without pretreatment have been reported. Here, we report a colorimetric paper-based device that allows point-of-care testing in one step. This device is composed of two paper-based elements linked to each other: a blood cell separation unit and a colorimetric detection unit. After a portion of whole blood has been placed on the end of the separation unit, plasma in the sample is automatically transported to the detection unit, which displays a diagnostic color. The key feature of this device is its simple, user-friendly operation. The limit of detection is 0.054 mM and the coefficient of variance is below 6.1%, which are comparable to those of conventional instruments using the same colorimetric reaction. Furthermore, we achieved high recovery (>90%) and reproducibility (

Paper-based packaging is widely employed in industries ranging from food to beverages to pharmaceuticals because of its attractive advantages of biodegradability, recyclability, good strength, low cost, and lightweight. However, paper products usually have poor water barrier resistance properties because of paper and fibers porous microstructure. In this study, an ecofriendly water-resistant (hydrophobic) oil from biological origin, namely, palm kernel oil (PKO) was used to coat paper by using a facile and cost-effective dip-casting approach. PKO formulation was prepared by mixing with a solvent and furfuryl alcohol (FA). The water resistance, structural properties, and thermal and mechanical properties of the coated papers obtained under different processing conditions were reported and compared to understand the performance of coated paper. Contact angle (CA), Fourier transform infrared (FTIR), and thermal gravimetry (TGA) were used for analysis and characterization of coated papers. Data from contact angle measurements showed that the PKO formulation could considerably improve the liquid water barrier property of the paper, with a measured water contact angle (CA) of ∼120° and reduce the water vapor transmission rate (WVTR) by 22%. This novel, green, low-cost, and water-resistant paper coating made with biological and biodegradable oil is a potential candidate for replacing petroleum-based coatings used in a broad range of applications and will also be able to make an additional full use of the palm kernel oil.

Because of numerous inherent and unrivaled features of nanofibers made of chitin, the second most plentiful natural-based polymer (after cellulose), including affordability, abundant nature, biodegradability, biocompatibility, commercial availability, flexibility, transparency, and extraordinary mechanical and physicochemical properties, chitin nanofibers (ChNFs) are being applied as one of the most appealing bionanomaterials in a myriad of fields. Herein, we exploited the beneficial properties offered by the ChNF paper to fabricate transparent, efficient, biocompatible, flexible, and miniaturized optical sensing bioplatforms via embedding/immobilizing various plasmonic nanoparticles (silver and gold nanoparticles), photoluminescent nanoparticles (CdTe quantum dots, carbon dots, and NaYF4:Yb3+@Er3+&SiO2 upconversion nanoparticles) along with colorimetric reagents (curcumin, dithizone, etc.) in the 3D nanonetwork scaffold of the ChNF paper. Several configurations, including 2D multi-wall and 2D cuvette patterns with hydrophobic barriers/walls and hydrophilic test zones/channels, were easily printed using laser printing technology or punched as spot patterns on the dried ChNF paper-based nanocomposites to fabricate the (bio)sensing platforms. A variety of (bio)chemicals as model analytes were used to confirm the efficiency and applicability of the fabricated ChNF paper-based sensing bioplatforms. The developed (bio)sensors were also coupled with smartphone technology to take the advantages of smartphone-based monitoring/sensing devices along with the Internet of Nano Things (IoNT)/the Internet of Medical Things (IoMT) concepts for easy-to-use sensing applications. Building upon the unrivaled and inherent features of ChNF as a very promising bionanomaterial, we foresee that the ChNF paper-based sensing bioplatforms will emerge new opportunities for the development of innovative strategies to fabricate cost-effective, simple, smart, transparent, biodegradable, miniaturized, flexible, portable, and easy-to-use (bio)sensing/monitoring devices., Financial support from the Chemistry & Chemical Engineering Research Centre of Iran (Tehran, Iran), Iran’s National Elites Foundation (INEF), Nano Novin Polymer Co. (Iran), and the Nano Match program of Iran Nanotechnology Initiative Council (INIC) are gratefully acknowledged. The ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa program of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO; grant nos. SEV-2017-0706 and MAT2017-87202-P). The financial support of “the Czech Science Foundation (No. 19-00676S)” is also greatly appreciated.

Real-time monitoring of neonicotinoid pesticide residues is of great significance for food security and sustainable development of the ecological environment. Herein, a paper-based surface-enhanced Raman scattering (SERS) amplified approach was proposed by virtue of multilayered plasmonic coupling amplification. The unique plasmonic SERS multilayer was constructed using three-dimensional (3D) silver dendrite (SD)/electropolymerized molecular identifier (EMI)/silver nanoparticle (AgNP) sandwich hybrids with multiple hotspots and a strong electromagnetic field in nanogaps. Dendritelike 3D silver materials with remarkably high accessible surface areas and the lightning rod effect constituted the first-order enhancement of paper-based sensors. Molecular identifiers coated upon an SD layer as the interlayer were used for target capture and enrichment. Subsequently, AgNPs featuring rough surface and local plasma resonance decorated as the top layer formed the secondary enhancement of the amplification strategy. As the most brilliant part, dendritelike 3D silver coupled with AgNPs has established double Ag layers to accomplish a multistage enhancement of SERS signals based on the superposition of their electromagnetic fields. Owning to the distinctive design of the multiple coupling amplification strategy, the fabricated SERS paper chips demonstrated impressive specificity and ultrahigh sensitivity in the detection of imidacloprid (IMI), with a detection limit as low as 0.02811 ng mL-1. More importantly, the multiple SERS enhancement paper chip holds great potential for automated screening of a variety of contaminants.

Cannabinoids present a unique set of analytical challenges. An increasing number of states have voted to decriminalize recreational marijuana use, creating a need for new kinds of rapid testing. At the same time, synthetic compounds with activity similar to THC, termed synthetic cannabinoids, have become more prevalent and pose significant health risks. A rapid method capable of detecting both natural and synthetic cannabinoids would be useful in cases of driving under the influence of drugs, where it might not be obvious whether the suspect consumed marijuana, a synthetic cannabinoid, or both. Paper spray mass spectrometry is an ambient ionization technique which allows for the direct ionization of analyte from a biofluid spot on a piece of paper. Natural cannabinoids like THC, however, are labile and rapidly disappear from dried sample spots, making it difficult to detect them at clinically relevant levels. Presented here is a method to concentrate and preserve THC and synthetic cannabinoids in urine and oral fluid on paper for analysis by paper spray mass spectrometry. Sesame seed oil was investigated both as a means of preserving THC and as part of a technique, termed paper strip extraction, wherein urine or oral fluid is flowed through an oil spot on a strip of paper to preconcentrate cannabinoids. This technique preserved THC in dried biofluid samples for at least 27 days at room temperature; paper spray MS/MS analysis of these preserved dried spots was capable of detecting THC and synthetic cannabinoids at low ng/mL concentrations, making it suitable as a rapid screening technique. The technique was adapted to be used with a commercially available autosampler.

Paper spray ionization has been used as a fast sampling/ionization method for the direct mass spectrometric analysis of biological samples at ambient conditions. Here, we demonstrated that by utilizing paper spray ionization-mass spectrometry (PSI-MS) coupled with field asymmetric waveform ion mobility spectrometry (FAIMS), predictive metabolic and lipidomic profiles of routine breast core needle biopsies could be obtained effectively. By the combination of machine learning algorithms and pathological examination reports, we developed a classification model, which has an overall accuracy of 87.5% for an instantaneous differentiation between cancerous and noncancerous breast tissues utilizing metabolic and lipidomic profiles. Our results suggested that paper spray ionization-ion mobility spectrometry-mass spectrometry (PSI-IMS-MS) is a powerful approach for rapid breast cancer diagnosis based on altered metabolic and lipidomic profiles.

Owing to its critical role in the development of female reproductive tissues and as a clinical biomarker, there is an urgent need to develop a rapid and cost-effective method to sensitively detect 17β-estradiol (E2). In this work, a folding aptasensor platform with microfluidic channels for the label-free electrochemical detection of E2 is described. The platform, designed with a delicate folding structure, integrating filter holes, microfluidic channels, reaction chambers, and a three-electrode system, is extremely easy to use. To increase the detection sensitivity and immobilize the aptamer, we synthesized a novel nanoassembly consisting of amine-functionalized single-walled carbon nanotube/new methylene blue/gold nanoparticles (AuNPs) and modified the working electrode with this nanoassembly. The calibration curve obtained from the experimental results exhibited a linear range between 10 pg mL-1 and 500 ng mL-1 (R2 = 0.993), and a detection limit of 5 pg mL-1 was achieved (S/N = 3). Furthermore, experiments to detect E2 in clinical serum were conducted, and the results were highly similar to those obtained using a large electrochemical luminescence apparatus. By integrating multiple functional components, adopting novel nanoassemblies, and using a folding structure, this paper-based platform not only has great potential as a simple and convenient integrated device for point-of-care testing of E2, but also as a portable, low-cost, and highly sensitive aptasensor platform capable of detecting many diagnostic biomarkers with the appropriate aptamers.

Many potential chemotherapeutics fail to reach patients. One of the key reasons is that compounds are tested during the drug discovery stage in two-dimensional (2D) cell cultures, which are often unable to accurately model in vivo outcomes. Three-dimensional (3D) in vitro tumor models are more predictive of chemotherapeutic effectiveness than 2D cultures, and thus, their implementation during the drug screening stage has the potential to more accurately evaluate compounds earlier, saving both time and money. Paper-based cultures (PBCs) are an emerging 3D culture platform in which cells suspended in Matrigel are seeded into paper scaffolds and cultured to generate a tissue-like environment. In this study, we demonstrate the potential of matrix-assisted laser desorption/ionization-mass spectrometry imaging with PBCs (MALDI-MSI-PBC) as a drug screening platform. This method discriminated regions of the PBCs with and without cells and/or drugs, indicating that coupling PBCs with MALDI-MSI has the potential to develop rapid, large-scale, and parallel mass spectrometric drug screens.

A digital fluorescence detector (DFD), a handheld fluorescence detection device, can convert the fluorescence signal of samples into the corresponding fluorescer concentration. Herein, by adopting a DFD as the readout, a novel intelligent platform was developed based on a ratiometric paper-based device (RPD) for multiple aminoglycoside detection. There are five layers and four parallel channels contained in the designed RPD, functioning as reagent storage, fluidic path control and signal processing, respectively. The rationale of this design lies in the fact that aptamer/graphitic carbon nitride nanosheet (Apt/g-C3N4 NS) modified layers can catalyze o-phenylenediamine to fluorescent 2,3-diaminophenazine (DAP) in the presence of H2O2. When Apt was removed from nanosheets via the Apt-target reaction, the peroxidase-like activity would be decreased, thus decreasing the production of DAP. All the changes of the fluorescence DAP signal can be read out using a portable DFD. Based on the DFD signal change related to the concentration of the target, a quantitative reaction platform was established. Furthermore, the sample flow and Apt-target reaction time can be reasonably regulated using the H2O2-cleavable hydrophobic compound modified layer placed between the target recognition region and detection region. Then, the practicality of this platform was verified through realizing sensitive analysis of streptomycin, tobramycin, and kanamycin simultaneously. Overall, with merits including portability and ease of operation, the platform shows great potential in on-site simultaneous detection of multiple targets, especially in resource-limited settings.

In this work, we introduce our recent finding that the carbon fiber paper (CFP) treated by simple air annealing (OCFP) could be used for exceptionally high-performance electrochemical nitrite sensing. The air-annealing process endows the pristine CFP with higher defective edge/plane sites, more oxygen-containing functional groups, higher roughness, and improved wettability. The electrochemical studies show that the OCFP exhibits excellent sensing performance for nitrite, with an ultralow determination limit of 0.1 μM and a detection limit of 0.07 μM, an ultrawide linear determination range of 0.1-3838.5 μM, a fast current response of 1 s, and a high sensitivity of 930.4 μA mM

Salmon fish farmers face remarkable problems in fish rearing and handling due to the spread of disease by infectious pancreatic necrosis virus (IPNV). Therefore, we developed a straightforward and sensitive technique to detect IPNV-based on recombinant human apoferritin heavy chain (hAFN-H) protein nanoparticles. In this study, the 24 subunits of the hAFN-H were genetically modified to express 6×His-tag and protein-G at their C-terminal site using Escherichia coli. We thus achieved a two-step signal amplifying strategy that utilizes a recombinant hAFN-H nanoprobe having a protein-G-binding site that targets the Fc region of monoclonal antibodies and a 6×His-tag that actively interacts with the functionalized Ni-NTA derivatives. In this study, we report a considerable advancement in magnetic bead-based detection systems that use Ni-NTA-Atto 550, reliably exhibiting detection limits of 1.02 TCID50/mL (50% tissue culture infective dose). Additionally, we propose a lateral flow chip-based detection method that uses the hAFN-H surface functionalized with 5 nm of the Ni-NTA-nanogold complex as a nanoprobe; the limit of detection towards IPNV was 0.88 TCID50/mL. The detection of IPNV by this recombinant hAFN-H nanoprobe was linear to virus titers in the range of 101-103 TCID50/mL.

The development of low cost, portable, and disposable biosensors for equipment-free and naked-eye biosensing is in eager demand for their widespread application in biomedical field, but it is still a challenge. Herein, we propose a novel paper analytical device (PAD) for truly equipment-free and naked-eye biosensing using dopamine as the chromogenic agent based on target-initiated catalyzed oxidation reaction. The dopamine-functionalized PAD (DPAD) possesses a significant three-dimensional net structure, excellent hydrophilicity, and unique response toward G-quadruplex DNAs against other DNAs, benefiting the bio/chemo reaction occurrence to assay target biomolecules. In light of the exceptional properties, the fabricated DPAD was applied in the analysis of Dam MTase through target-triggered exponential isothermal amplification. The recognition and methylation of H1 by Dam MTase contribute to formation of abundant hemin/G-quadruplexes, which catalyze oxidation of dopamine into dopachrome and reduce the dopamine amount on the DPAD surface. In comparison with the case in which Dam MTase is absent, an evident deep pink signal originating from dopachrome is observed directly by the naked eye and relied on Dam MTase concentrations. Therefore, truly equipment-free and naked-eye detection of Dam MTase is achieved with a detection limit of 1.46 U/mL. The fabricated DPAD not only achieves Dam MTase-visualized detection but also permits the accurate determination of other analytes by varying recognizable DNA's sequences, thus offering a universal biosensor and depicting significant potential for widespread applications in biomedical field.

Chemiluminescence (CL) immunoassays for simultaneous detection of early acute myocardial infarction (AMI) biomarkers, including copeptin, heart-type fatty acid binding protein (h-FABP), and cardiac troponin I (cTnI), were developed by using Co2+/N-(aminobutyl)-N-(ethylisoluminol) (ABEI) functionalized magnetic carbon composite (Co2+-ABEI-Fe3O4@void@C) as an interface and a three-dimensional microfluidic paper-based device (3D μPAD) as a detection system. For CL immunoassays, Co2+-ABEI-Fe3O4@void@C was assembled with chitosan (CS) and gold nanoparticle-conjugated antibody (Au-Ab) sequentially to form the sensing platform (Co2+-ABEI-Fe3O4@void@C-CS/Au-Ab). In the presence of antigen (Ag), Ag was captured by the sensing interface to form an immunocomplex, leading to an increase in CL intensity due to the catalysis of -COO- existing in Ag. A 3D μPAD with three detection zones for simultaneous detection of copeptin, h-FABP, and cTnI was designed and fabricated to obtain time-resolved CL signals. Three kinds of immunocomplexes formed with copeptin, h-FABP, and cTnI were added to three detection zones of 3D μPAD, respectively. After injecting H2O2, three time-resolved CL signals were generated in one CL detection run by virtue of time-delayed transport of H2O2 to different detection zones. The three time-resolved CL signals were used for the simultaneous determination of copeptin, h-FABP, and cTnI. The detection limit of copeptin, h-FABP, and cTnI was 0.40 pg/mL, 0.32 pg/mL, and 0.50 pg/mL, respectively, which is at least 1 order of magnitude lower than most of the reported immunoassays. The immunoassays could be directly used for the detection of copeptin, h-FABP, and cTnI in human serum samples. The proposed immunoassays are simple, fast, sensitive, and selective, and are of great application potential in early diagnosis and treatment of AMI.

Paper-based microfluidic analytical devices (μPADs) have recently attracted attention as a point-of-care test kit because of their low cost and nonrequirement for external forces. To directly detect biomarkers in whole blood, however, they need to be assembled with a filter such as a plasma separation membrane (PSM) because the color of the blood cells interferes with the colorimetric assay. However, this assembly process is rather complicated and cumbersome, and the fluid does not uniformly move to the detection zone when the adhesion between the paper and PSM is not perfect. In this study, we report a simple three-dimensional (3D) printing method for fabricating PSM-integrated 3D-μPADs made of plastics without the need for additional assembly. In detail, PSM was coated with parylene C to prevent its dissolution from organic solvent during 3D printing. Then, the coated PSM was superimposed on the paper. Detection zones and a reservoir were printed on the paper and PSM via liquid photopolymerization, using a digital light processing printer. The limit of detection of the PSM-integrated 3D-μPADs for glucose in whole blood was 0.3 mM, and these devices demonstrated clinically relevant performance on diabetes patient blood samples. Our 3D-μPADs can also simultaneously detect multiple metabolic disease markers including glucose, cholesterol, and triglycerides in whole blood. Our results suggest that our printing method is useful for fabricating 3D-μPADs integrated with PSM for the direct detection of biomarkers in whole blood.

Flexible pressure sensors have attracted considerable attention because of their potential applications in healthcare monitoring and human-machine interactions. However, the complicated fabrication process and the cos of sensing materials limit their widespread applications in practice. Herein, a flexible pressure sensor with outstanding performances is presented through an extremely simple and cost-efficient fabrication process. The sensing materials of the sensor are based on low-cost carbon black (CB)@airlaid paper (AP) composites, which are just prepared by drop-casting CB solutions onto APs. Through simply stacking multiple CB@APs with an irregular surface and a fiber-network structure, the obtained pressure sensor demonstrates an ultrahigh sensitivity of 51.23 kPa-1 and an ultralow detection limit of 1 Pa. Additionally, the sensor exhibits fast response time, wide working range, good stability, as well as excellent flexibility and biocompatibility. All the comprehensive and superior performances endow the sensor with abilities to precisely detect weak air flow, wrist pulse, phonation, and wrist bending in real time. In addition, an array electronic skin integrated with multiple CB@AP sensors has been designed to identify spatial pressure distribution and pressure magnitude. Through a biomimetic structure inspired by blooming flowers, a sensor with the open-petal structure has been designed to recognize the wind direction. Therefore, our study, which demonstrates a flexible pressure sensor with low cost, simple preparation, and superior performances, will open up for the exploration of cost-efficient pressure sensors in wearable devices.

Polymerization-based signal amplification (PBA) is a material-based approach to improving the sensitivity of paper-based diagnostic tests. Eosin Y is used as an assay label to photo-initiate free-radical polymerization to produce colored hydrogels in the presence of target analytes captured by bioactive paper. PBA achieves high-contrast and time-independent signals, but its nanomolar detection limit makes it impractical for early diagnosis of many diseases. In this work, we demonstrated efficient localization of large quantities of eosin Y per captured target analyte by incorporating eosin Y-loaded liposomes into PBA. This new "materials approach" allowed 30-fold signal enhancement compared to conventional PBA. To further improve the detection limit of liposome-enhanced PBA, we used a continuous flow-through assay format with 100 μL of analyte solution, achieving sub-nanomolar detection limits with high-contrast signals that were easily discernible to the unaided eye.

Minimally invasive devices to detect molecules in dermal interstitial fluid (ISF) are desirable for point-of-care diagnostic and monitoring applications. In this study, we developed a microneedle (MN) patch that collects ISF for on-patch biomarker analysis by surface-enhanced Raman scattering (SERS). The micrometer-scale MNs create micropores in the skin surface, through which microliter quantities of ISF are collected onto plasmonic paper on the patch backing. The plasmonic paper was prepared by immobilizing poly(styrenesulfonate) (PSS) coated gold nanorods (AuNRs) on a thin strip of filter paper using plasmonic calligraphy. Negatively charged PSS was used to bind positively charged rhodamine 6G (R6G), which served as a model compound, and thereby localize R6G on AuNR surface. R6G bound on the AuNR surface was detected and quantified by acquiring SERS spectra from the plasmonic paper MN patch. This approach was used to measure pharmacokinetic profiles of R6G in ISF and serum from rats in vivo. This proof-of-concept study indicates that a plasmonic paper MN patch has the potential to enable on-patch measurement of molecules in ISF for research and future medical applications.

Paper-based optoelectronic noses (OENs) are being developed based on printing of organic and organometallic reagents on hydrophilic substrates that can visualize the odor of volatiles. In this work, we report for the first time the use of nanoparticles for fabrication of novel paper-based OENs, which represent much higher sensitivity and produce simple but discriminant colorimetric signature of volatile metabolomes. This nano-optoelectronic nose (NOEN) system, which is fabricated by dropping of gold and silver nanoparticles (each synthesized by 8 chemical species) on the paper, gives obvious colorimetric signatures for chemicals having individual or combined functional groups. Owning to their ultrasensitivity, these simple devices need very small amounts of analytes. These devices could detect and discriminate 45 volatile organic compounds in 9 chemical families including phenols, alchohols, ketones, aldehydes, amines, acids, esters, arenes, and hydrocarbons. In addition to excellent discrimination ability, this NOEN sensor shows ultrahigh sensitivity such that could determine volatile compounds with detection limits around or lower than 10 ppb. Moreover, it can be combined with multivariate calibration methods for quantitative analysis of a metabolite in a complex mixture.

Due to the combined advantages of cellulose and nanoscale (diameter 20–60 nm), bacterial cellulose possesses a series of attractive features including its natural origin, moderate biosynthesis process, good biocompatibility, and cost-effectiveness. Moreover, bacterial cellulose nanofibers can be conveniently processed into three-dimensional (3D) intertwined structures and form stable paper devices after simple drying. These advantages make it suitable as the material for construction of organ-on-a-chip devices using matrix-assisted sacrificial 3D printing. We successfully fabricated various microchannel structures embedded in the bulk bacterial cellulose hydrogels and retained their integrity after the drying process. Interestingly, these paper-based devices containing hollow microchannels could be rehydrated and populated with relevant cells to form vascularized tissue models. As a proof-of-concept demonstration, we seeded human umbilical vein endothelial cells (HUVECs) into the microchannels to obtain the vasculature and inoculated the MCF-7 cells onto the surrounding matrix of the paper device to build a 3D paper-based vascularized breast tumor model. The results showed that the microchannels were perfusable, and both HUVECs and MCF-7 cells exhibited favorable proliferation behaviors. This study may provide a new strategy for constructing simple and low-cost in vitro tissue models, which may find potential applications in drug screening and personalized medicine.