Search

In this study, we investigate the atomic layer deposition (ALD) process on all-inorganic CsPbBr 3 perovskite nanocrystals (PNCs) to introduce an inorganic electron transport layer (ETL) in light-emitting diode (LED) devices. Two types of CsPbBr 3 PNCs were synthesized with oleate (OA) and oleylammonium (OLA) ligands on the surface. We found that CsPbBr 3 PNCs with Cs oleate surfaces experienced severe photoluminescence (PL) quenching after the ALD process, while those with oleylammonium bromide surfaces did not show any significant PL drop. Transmission electron microscopy and X-ray photoelectron spectroscopy revealed that significant Pb metal formation and Ruddlesden-Popper planar faults, linked to uncoordinated Pb 2+ ion defects, were generated in CsPbBr 3 PNCs terminated with Cs oleate after ALD ZnO. Finally, we fabricated LEDs using PNCs with an ALD ZnO process to introduce inorganic ZnMgO nanoparticles as the ETL. The devices processed with ALD exhibited superior luminance and external quantum efficiency compared to those without the ALD process. This research provides crucial insights into the surface-dependent chemistry of PNCs and the surface-dependent performance of perovskite-based optoelectronic devices.

Diabetic retinopathy is a disease that can cause vision loss leading to blindness in people with diabetes. Improved methods to treat and prevent vision loss in diabetic patients are in high demand owing to limited current treatment procedures. Herein, we report a new class of transglutaminase 2 (TGase2) inhibitors for the treatment of diabetic retinopathy based on 7-aminoquinoline-5,8-dione derivatives. 7-Amino-2-phenylquinoline-5,8-dione 11 and 7-amino-2-{4-[(1-methylpiperidin-4-yl)oxy]phenyl}quinoline-5,8-dione 23 exhibited potent inhibitory activities against TGase2 in a fibrinogen array-based on-chip TGase2 activity assay and in an in situ assay in human retinal microvascular endothelial cells, with IC 50 values of 5.88 and 1.12 μM in vitro, and 0.09 and 0.07 μM in situ, respectively. Pharmacokinetically favorable 7-amino-2-{4-[(1-isopropylpiperidin-4-yl)oxy] phenyl}quinoline-5,8-dione 22 inhibited vascular leakage in the retinas of streptozotocin-induced diabetic mice via oral administration. Results from the AL5 kinetic assay and a molecular docking study suggest that the inhibitors may bind to TGase2 remote from the active site.

Fine inhalable particulate matter (PM 2.5 ) is a harmful airborne pollutant, with serious repercussions to public health worldwide. To prevent the influx of PM 2.5 into the indoor living and working space, we conceived the design of a "filtration window" that exhibits efficient PM 2.5 filtration capabilities while having sufficient transparency and physical durability. In this work, we demonstrate the successful fabrication of a transparent (∼80%) PM 2.5 filter based on nanofibrous poly(vinylidenefluoride- co -trifluoroethylene) (PVDF-TrFE), which captures PM 2.5 by electrostatic mechanisms originating from the ferroelectric property of the copolymer. The embedded PVDF-TrFE-based nanofibrous filter exhibits a notable PM 2.5 removal efficiency of 93%, which is on par with those of medical-grade face masks. Simultaneously, owing to its dense packing, the PVDF-TrFE nanofibrous filter is highly durable, allowing it to be cleaned with water for reuse, and withstands its structural integrity even under a wind flow of 15 m/s, altogether making it practically viable as a functional window unit.

We studied the hydroboration of the C 70 fullerene using both B3LYP-D3(BJ)/6-311G(d,p) and M06-2X-D3/6-311G(d,p) levels of theory, incorporating the empirical dispersion interaction, and Fukui index calculations. Potential energy surfaces (PESs) and Gibbs free energy surfaces (GFESs) were calculated for the pathways from four BH 3 adducts (located at the AB , CC , D , and E sites) on the C 70 to eight products formed by the 1,2-addition of BH 3 across the four [6,6]-ring fused bonds ( AB , CC , DE , and EE ) and across the two [5,6]-ring fused bonds ( AA and DD ). These pathways are two-step consecutive reactions. We denoted the positions on the fullerene cage as A through E , from the pole to the equator, based on the D 5h symmetry of the C 70 fullerene. In the first step reaction, the product ratios for the four adduct intermediates should be as the primary intermediate BH 3 ( D ), the secondary intermediate BH 3 ( AB ), the tertiary intermediate BH 3 ( CC ), and the minor intermediate BH 3 ( E ), based on the Fukui indices. In addition, in the second step reaction, transition states (TSs) from four adduct intermediates to eight product isomers, namely, BH 2 ( A )H ( B ) to BH 2 ( E )H ( E ), were obtained using the QST2 method. The calculated reaction coordinates showed exothermic reactions for all bonds except the EE bond. We also confirmed the transition states by frequency calculations and intrinsic reaction coordinate (IRC) analyses. The PESs and GFESs suggest spontaneous processes for the four isomers, of which the primary products are BH 2 ( A )H ( B ) and its isomer BH 2 ( B )H ( A ), the secondary product is BH 2 ( C )H ( C ), and the tertiary product is BH 2 ( D )H ( D ), all formed through adduct intermediates. Therefore, through the hydroboration reaction of C 70 , we could predict and design the site selectivity of C 70 by controlling the energy barrier of the transition state in the second step of the reaction. This implies that we could selectively synthesize mainly BH 2 ( B )H ( A ) isomers across the AB-[6,6]-ring fused bond and also design BH 2 ( D )H( D ) isomers across the DD-[5,6]-ring fused bond. Also, the calculations of formation rate constants can well simulate the experimental ratio of two C 70 H 2 isomers by the hydrolysis of BH 2 ( A )H( B ), BH 2 ( B )H( A ), and BH 2 ( C )H( C ) products at room temperature.

As electronic circuit integration intensifies, there is a rising demand for dielectric insulators that provide both superior insulation and high dielectric constants. This study focuses on developing high-k dielectric insulators by controlling the phase of the Hf 0.5 Zr 0.5 O 2 (HZO) film with additional doping, utilizing yttrium (Y), tantalum (Ta), gallium (Ga), silicon (Si), and aluminum (Al) as dopants. Doping changes the ratio of tetragonal to monoclinic phases in doped HZO films, and Y-doped HZO (Y:HZO) films specifically exhibit a high tetragonal phase ratio and a dielectric constant of 40.9, indicating superior insulating properties compared to undoped HZO films. To clarify the fundamental mechanism driving the enhancement in dielectric properties, we have carried out various analyses combined with density functional theory (DFT) calculations. Through the optimization of the post-deposition annealing (PDA) process and the heterojunction structure with Al 2 O 3 , an Al 2 O 3 /Y:HZO heterojunction with a high dielectric constant and even lower leakage current compared to a single layer was developed. The thin-film transistor (TFT) with the Au/Ti/amorphous InGaZnO 4 (a-IGZO)/Al 2 O 3 /YHZO/TiN heterojunction structure exhibits low subthreshold swing (SS) values within a narrow gate-source voltage ( V sg ) range. This study advances knowledge on how the controlled-phase doped HZO films affect the dielectric constant and leakage current and will contribute to semiconductor technology advancements by overcoming the limitations of conventional high-k dielectric insulators.

This paper presents a platform for amyloid-β (Aβ) biosensors, employing nearly monolayer semiconducting single-walled carbon nanotubes (sc-SWNTs) via click reaction. A high-purity sc-SWNT ink was obtained by employing a conjugated polymer wrapping method with the addition of silica gel. Aβ detection involved monitoring the electrical resistances of the sc-SWNT layers. Electrical resistances increased rapidly corresponding to the concentration of amyloid-β 1-42 (Aβ1-42) peptides. Furthermore, we introduced Aβ peptides onto the 1-pyrenebutanoic acid succinimidyl ester (PBASE) linker, confirming that only the chemical adsorption of the peptide by the antibody-antigen reaction yielded a significant change in electrical resistance. The optimized sensor exhibited a high sensitivity of 29% for Aβ at a concentration of 10 pM. Notably, the biosensor platform featuring chemically immobilized sc-SWNT networks can be customized by incorporating various bioreceptors beyond Aβ antibodies.

Hydrogen (H 2 ) is a promising alternative energy source for Net-zero, but the risk of explosion requires accurate and rapid detection systems. As the use of H 2 energy expands, sensors require high performance in a variety of properties. Palladium (Pd) is an attractive material for H 2 detection due to its high H 2 affinity and catalytic properties. However, poor stability caused by volume changes and reliability due to environmental sensitivity remain obstacles. This study proposes a micropatterned thin film of PdAu with optimized composition (Pd 0.62 Au 0.38 ) as a chemoresistive sensor to overcome these issues. At room temperature, the sensor has a wide detection range of 0.0002% to 5% and a fast response time of 9.5 s. Significantly, the sensor exhibits excellent durability for repeated operation (>35 h) in 5% H 2 and resistance to humidity and carbon monoxide. We also report a negative resistivity change in PdAu, which is opposite to that of Pd. Density functional theory (DFT) calculations were performed to investigate the resistance change. DFT analysis revealed that H 2 penetrates specific interstitial sites, causing partial lattice compression. The lattice compression causes a decrease in electrical resistance. This work is expected to contribute to the development of high-performance H 2 sensors using Pd-based alloys.

The kinetics of interfacial ion insertion govern the uniformity of electrochemical reactions, playing a crucial role in lithium-ion battery performance. In two-dimensional lithium-conducting layered-oxide battery particles, variation in insertion rates across insertion channels remains unclear due to poorly defined crystal orientation at the solid-liquid interface and solid-state-lithium-diffusion length. This ambiguity complicates understanding inhomogeneous lithium-insertion channels activation. A systematic study requires crystallographically predefined interfaces and in situ lithium-concentration mapping. Here, we fabricated a freestanding, (104)-oriented-LiNi 1/3 Mn 1/3 Co 1/3 O 2 single-crystal thin film using dissolution-induced release and performed in situ scanning-transmission-X-ray-microscopy to spatially resolve lithium-insertion at well-defined-interfaces. We observed heterogeneous lithium-concentration evolution due to channel-by-channel insertion rate variation, despite the potential for homogeneous lithium distribution via a solid-solution-phase at equilibrium in NMC111. Increasing current density exacerbates this heterogeneity, highlighting channel-by-channel variation. Our findings provide critical insights into battery electrode utilization and lifetime management, potentially guiding the design of more efficient and durable lithium-ion batteries.

Two-dimensional (2D) halide perovskites have become a promising class of memristive materials due to their low power consumption, compositional versatility, and microstructural anisotropy in electronics. However, implementing high-performance resistive random-access memory requires a higher reliability and moisture resistance. To address these issues, component studies and attempts to improve the phase stability have been reported but have not been able to achieve sufficient reliability. Here, highly textured thin films grown perpendicular to the substrate in Ruddlesden-Popper 2D perovskites exhibited highly stable and reliable binary memory performance. We further built a flexible crossbar array to verify data storage capability, achieving a high device yield, robust endurance, long retention, reliability to operate under bending conditions, and moisture stability over a year. These device performances are attributed to preformed vertically oriented nanocrystals that allow the conductive filaments to operate reliably. Our finding provides the material design strategy that can be extended to the development of semiconductor materials for next-generation memory devices.

In this Perspective, we present the recent advancement and the prospects of atomic-scale friction and adhesion measurements across the pressure gap between ultrahigh vacuum and ambient pressure environments using variable-pressure atomic force microscopy (VP-AFM). We introduce the VP-AFM that enables nanotribological studies under various gas conditions with partial pressure ranging from UHV (1.0 × 10 -10 mbar) to 1 bar. We highlight the frictional behaviors of ultrananocrystalline diamond surface in oxygen and water gas environments, as well as the chemical states probed with near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS). The atomic scale degradation processes of MA(CH 3 NH 3 )PbBr 3 , which is an organic-inorganic hybrid perovskite (OHP) investigated with VP-AFM are introduced. Finally, we discuss the potential works on catalytic model systems including bimetallic Pt 3 Ni(111) and TiO 2 (110) and the future perspective of nanotribology under ambient conditions.

The drying process of inkjet-printed organic light-emitting diodes (OLEDs) is influenced by both ink properties and external environmental factors, which ultimately affect the film profile. First, we conducted a detailed investigation of the drying time based on changes in the boiling point (BP) of mixed solvents and analyzed the correlation with the film profile. Under atmospheric drying conditions in a nitrogen (N 2 ) atmosphere, the increased drying time under capillary-driven flow leads to greater particle movement toward the edges, significantly increasing the coffee-ring effect. Additionally, using a high-boiling-point solvent mixture of ethyl 4-methylbenzoate (EMB) and 2-ethylhexyl benzoate (EHB), we produced uniform thin films both between and within pixels (inter and intrapixel uniformity) through a vacuum drying process. In particular, we proposed a drying process model that divides the drying of inkjet pixels into a microfluidic phase and a gelation phase. Through five gelation phase-controlled vacuum drying experiments, the morphology within the pixels was precisely investigated. By sufficiently removing residual solvents after the microfluidic phase and then proceeding with heating, we produced uniform thin films. Furthermore, we fabricated OLED devices using this gelation phase-controlled vacuum drying process, achieving uniform pixel emission and improved device performance.

A general strategy that combines genetic code expansion with bio-orthogonal ligation techniques was developed and utilized to prepare homogeneously glycosylated receptors on the surface of mammalian cells. Using this approach, conjugates of the cell-surface oxytocin receptor (OTR) with oligosaccharides were efficiently generated in the cells. Cell studies revealed that glycans linked to the OTR are not essential for agonist-induced calcium flux and its internalization into cells via an OTR-mediated endocytosis.

This study demonstrated that NiO and Ni(OH) 2 as Ni(II) catalysts exhibited significant activity for organic oxidation in the presence of various oxyanions, such as hypochlorous acid (HOCl), peroxymonosulfate (PMS), and peroxydisulfate (PDS), which markedly contrasted with Co-based counterparts exclusively activating PMS to yield sulfate radicals. The oxidizing capacity of the Ni catalyst/oxyanion varied depending on the oxyanion type. Ni catalyst/PMS (or HOCl) degraded a broad spectrum of organics, whereas PDS enabled selective phenol oxidation. This stemmed from the differential reactivity of two high-valent Ni intermediates, Ni(III) and Ni(IV). A high similarity with Ni(III)OOH in a substrate-specific reactivity indicated the role of Ni(III) as the primary oxidant of Ni-activated PDS. With the minor progress of redox reactions with radical probes and multiple spectroscopic evidence on moderate Ni(III) accumulation, the significant elimination of non-phenolic contaminants by NiOOH/PMS (or HOCl) suggested the involvement of Ni(IV) in the substrate-insensitive treatment capability of Ni catalyst/PMS (or HOCl). Since the electron-transfer oxidation of organics by high-valent Ni species involved Ni(II) regeneration, the loss of the treatment efficiency of Ni/oxyanion was marginal over multiple catalytic cycles.

Diffuse large B-cell lymphomas (DLBCLs) are heterogeneous cancers that still require better and less toxic treatments. SIRT3, a member of the sirtuin family of NAD + -dependent protein deacylase, is critical for DLBCL growth and survival. A mitochondria-targeted SIRT3 small-molecule inhibitor, YC8-02, exhibits promising activity against DLBCL. However, YC8-02 has several limitations including poor solubility. Here, we report our medicinal chemistry efforts that led to an improved mitochondria-targeted SIRT3 inhibitor, SJ-106C, achieved by using a triethylammonium group, which helps to increase both solubility and SIRT3 inhibition potency. SJ-106C, while still inhibiting SIRT1 and SIRT2, is enriched in the mitochondria to help with SIRT3 inhibition. It is more active against DLBCL than other solid tumor cells and effectively inhibits DLBCL xenograft tumor growth. The findings provide useful insights for the development of SIRT3 inhibitors and mitochondrial targeting agents and further support the notion that SIRT3 is a promising druggable target for DLBCL.

Interfacial interactions between polymers and fillers play a crucial role in determining the performance of composite materials. In this study, mechano-responsive spiropyran (SP) beads, which exhibit fluorescence changes under stress, serve as force probes to evaluate force transfer efficiency across two types of interfaces: noncovalent and covalent. These interfaces are engineered by respectively employing physical blending and grafting polymerization to integrate hydroxyl SP beads with a polyurethane (PU) matrix. A custom-built in situ opto-mechanical setup quantitatively assesses force transfer by monitoring changes in fluorescence intensity and peak wavelength during specimen stretching. The analysis reveals that the covalent interface significantly outperforms the noncovalent interface, demonstrating a 100% improvement in force magnitude and transfer rate from the PU matrix to the SP beads. Direct observation of SP beads within the PU matrix during tension unveils that enhanced force transfer efficiency is closely linked to changes in the SP beads' aspect ratio. Fluorescence changes in SP beads are solely a function of aspect ratio, making them effective independent force probes.

Tin-lead (Sn-Pb) perovskite solar cells (PSCs) hold considerable potential for achieving efficiencies near the Shockley-Queisser (S-Q) limit. Notably, the inverted structure stands as the preferred fabrication method for the most efficient Sn-Pb PSCs. In this regard, it is imperative to implement a strategic customization of the hole selective layer to facilitate carrier extraction and refine the quality of perovskite films, which requires effective hole selectivity and favorable interactions with Sn-Pb perovskites. Herein, we propose the development of Co-Self-Assembled Monolayers (Co-SAM) by integrating both [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) and glycine at the buried contacts. The one-step deposition process employed in the fabrication of the Co-SAM ensures uniform coverage, resulting in a homogeneous surface potential. This is attributed to the molecular interactions occurring between 2PACz and glycine in the processing solution. Furthermore, the amine (-NH 2 ) and ammonium (-NH 3 + ) groups in glycine effectively passivate Sn 4+ defects at the buried interface of Sn-Pb perovskite films, even under thermal stress. Consequently, the synergistic buried interface regulation of Co-SAM leads to a power conversion efficiency (PCE) of 23.46%, which outperforms devices modified with 2PACz or glycine alone. The Co-SAM-modified Sn-Pb PSC demonstrates enhanced thermal stability, maintaining 88% of its initial PCE under 65 °C thermal stress for 590 h.

The film-forming capability of the host plays a crucial role in effectively forming a light-emitting layer through a solution process in organic light-emitting diodes (OLEDs). In this study, we synthesized two side-chain polymer hosts, PCz-DBT and P2Cz-DBT , consisting of carbazole and dibenzothiophene. The synthesis was carried out through radical polymerization using styrene-based host monomers. Their photophysical characteristics and molecular energy levels are similar to those of the reference small molecule hosts, namely, Cz-DBT and 2Cz-DBT. However, compared to the small-molecule hosts Cz-DBT and 2Cz-DBT, the two polymer hosts showed high thermal stability and good film-forming properties in the neat and host-emitter blend films. Specifically, bluish-green multiple-resonance (MR) thermally activated delayed fluorescence (TADF) OLEDs, fabricated via solution processing with an emissive layer based on P2Cz-DBT , exhibited remarkable performance. These devices achieved a maximum external quantum efficiency of 17.4% without utilizing a hole transport layer. This polymer host design strategy is considered to significantly contribute to enhancing the performance of TADF-OLEDs fabricated through solution processing.

In this work, we report an n-type metal-oxide-semiconductor (nMOS) inverter using chemical vapor deposition (CVD)-grown monolayer WS 2 field-effect transistors (FETs). Our large-area CVD-grown monolayer WS 2 FETs exhibit outstanding electrical properties including a high on/off ratio, small subthreshold swing, and excellent drain-induced barrier lowering. These are achieved by n-type doping using AlO x /Al 2 O 3 and a double-gate structure employing high- k dielectric HfO 2 . Due to the superior subthreshold characteristics, monolayer WS 2 FETs show high transconductance and high output resistance in the subthreshold regime, resulting in significantly higher intrinsic gain compared to conventional Si MOSFETs. Therefore, we successfully realize subthreshold operating monolayer WS 2 nMOS inverters with extremely high gains of 564 and 2056 at supply voltage ( V DD ) of 1 and 2 V, respectively, and low power consumption of ∼2.3 pW·μm -1 at V DD = 1 V. In addition, the monolayer WS 2 nMOS inverter is further expanded to the demonstration of logic circuits such as AND, OR, NAND, NOR logic gates, and SRAM. These findings suggest the potential of monolayer WS 2 for high-gain and low-power logic circuits and validate the practical application in large areas.

ConspectusGas sensors are used in various applications to sense toxic gases, mainly for enhanced safety. Resistive sensors are particularly popular owing to their ability to detect trace amounts of gases, high stability, fast response times, and affordability. Semiconducting metal oxides are commonly employed in the fabrication of resistive gas sensors. However, these sensors often require high working temperatures, bringing about increased energy consumption and reduced selectivity. Furthermore, they do not have enough flexibility, and their performance is significantly decreased under bending, stretching, or twisting. To address these challenges, alternative materials capable of operating at lower temperatures with high flexibility are needed. Two-dimensional (2D) materials such as MXenes and transition-metal dichalcogenides (TMDs) offer high surface area and conductivity owing to their unique 2D structure, making them promising candidates for realization of resistive gas sensors. Nevertheless, their sensing performance in pristine form is typically weak and unacceptable, particularly in terms of response, selectivity, and recovery time ( t rec ). To overcome these drawbacks, several strategies can be employed to enhance their sensing properties. Noble-metal decoration such as (Au, Pt, Pd, Rh, Ag) is a highly promising method, in which the catalytic effects of noble metals as well as formation of potential barriers with MXenes or TMDs eventually contribute to boosted response. Additionally, bimetallic noble metals such as Pt-Pd and Au/Pd with their synergistic properties can further improve sensor performance. Ion implantation is another feasible approach, involving doping of sensing materials with the desired concentration of dopants through control over the energy and dosage of the irradiation ions as well as creation of structural defects such as oxygen vacancies through high-energy ion-beam irradiation, contributing to enhanced sensing capabilities. The formation of core-shell structures is also effective, creating numerous interfaces between core and shell materials that optimize the sensing characteristics. However, the shell thickness needs to be carefully optimized to achieve the best sensing output. To reduce energy consumption, sensors can operate in a self-heating condition where an external voltage is applied to the electrodes, significantly lowering the power requirements. This enables sensors to function in energy-constrained environments, such as remote or low-energy areas. An important advantage of 2D MXenes and TMDs is their high mechanical flexibility. Unlike semiconducting metal oxides that lack mechanical flexibility, MXenes and TMDs can maintain their sensing performance even when integrated onto flexible substrates and subjected to bending, tilting, or stretching. This flexibility makes them ideal for fabricating flexible and portable gas sensors that rigid sensors cannot achieve.

Understanding the influence of surface structural features at a molecular level is beneficial in guiding an electrode's mechanistic proposals for electrocatalytic reactions. The relationship between structural stability and catalytic activity significantly impacts reaction performance, even though atomistic knowledge of active sites remains a topic of discussion. In this context, this work presents scanning tunneling microscopy (STM) results for the highly ordered arrangement of manganese porphyrin molecules on a Au(111) surface; STM allows us to monitor active sites at a molecular level to focus on long-standing issues with the electrocatalytic process, especially the exact nature of the real active sites at the interfaces. After water oxidation, manganese porphyrin rapidly decomposes into active catalytic species as bright protrusions. These newly formed active species drastically lost catalytic activity, up to 82%, through only acid treatment, one of the oxide removal methods, not by deionized water and acetone treatments. STM results of the obviated active species on the Au surface by an acidic solution support the forfeited catalytic activity. In addition, it shows a 67% decrement in catalytic activity by adsorption of phosphonic acid, one of the oxide's preferred adsorption materials, compared to the pristine one. Based on these observations, we confirm that the newly formed active species, as water oxidation catalysts, mostly consist of manganese oxides. Notable findings of our work provide molecular evidence for the active sites of Au and modified Au electrodes that spur the future development of water oxidation catalysts.

Salted and fermented seafood ( jeotgal ) is known for its long shelf life and unique flavor. Despite the existence of various types of salted seafood, the factors influencing this quality have yet to be identified. These factors are essential for improving the quality of salted seafood, optimizing the fermentation process, and advancing the industrialization of fermented foods. Therefore, in this study, we explored microbial dynamics and changes in quality characteristics in three salted seafood items - salted anchovies (MJ), salted cutlass offal (GJ), and salted croakers (HJ), over a 24-month fermentation period. Distinct microbial community profiles, dominated by Tetragenococcus halophilus , Halanaerobium fermentans , and Chromohalobacter canadensis in MJ, GJ, and HJ, respectively, affect the metabolic pathways and the corresponding flavor profiles. The pH of all samples ranged from 5.7-6.0. The titratable acidity was highest in MJ at 1.4% and lowest in HJ at approximately 0.7%. Salinity was below 25% in all samples but slightly lower in MJ. Significant differences were observed in the amino acid, nucleotide, and overall metabolite profiles. MJ exhibited the highest amino acid and nitrogen-related factor levels, such as glutamic acid and hypoxanthine, enhancing flavor complexity. Correlation analysis revealed significant associations among the types, metabolites, and microbial communities. Microbial survival mechanisms in high-salt environments result in the production of unique metabolites, including umami and aroma components as well as precursors of biogenic amines, which can affect the overall quality of the final product. These differences were primarily influenced by the fish type rather than the fermentation time. Our findings provide foundational insights for enhancing fermentation strategies, improving product consistency, and advancing the industrial application of microbial management in seafood fermentation. This study not only fills a significant gap in the current understanding of fermented seafood but also outlines practical approaches for industry applications for the optimization of product quality., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

In addressing the intricate challenges of enterocutaneous fistula (ECF) treatment, such as internal bleeding, effluent leakage, inflammation, and infection, our research is dedicated to introducing a regenerative adhesive hydrogel that can seal and expedite the healing process. A double syringe setup was utilized, with dopagelatin and platelet-rich plasma (PRP) in one syringe and Laponite and sodium periodate in another. The hydrogel begins to cross-link immediately after passing through a mixing tip and exhibits tissue adhesive properties. Results demonstrated that PRP deposits within the pores of the cross-linked hydrogel and releases sustainably, enhancing its regenerative capabilities. The addition of PRP further improved the mechanical properties and slowed down the degradation of the hydrogel. Furthermore, the hydrogel demonstrated cytocompatibility, hemostatic properties, and time-dependent macrophage M1 to M2 phase transition, suggesting the anti-inflammatory response of the material. In an in vitro bench test simulating high-pressure fistula conditions, the hydrogel effectively occluded pressures up to 300 mmHg. In conclusion, this innovative hydrogel holds promise for ECF treatment and diverse fistula cases, marking a significant advancement in its therapeutic approaches.

The perovskite quantum dots (QDs) of CsPbX 3 (X = Cl, Br, I) exhibit exceptional photoluminescent properties, but their sensitivity to moisture and heat poses a challenge. This study presents a solvent-free synthesis approach for incorporating CsPbBr 3 perovskite QDs into zeolite A. The introduction of [Cs 8 PbBr 6 ] 4+ perovskite QDs into the zeolite framework resulted in a highly stable configuration, maintaining its initial luminescence properties even after being underwater or exposed to heat. The structure is determined by 3-dimensional single-crystal crystallography. Each octahedral PbBr 6 4- ion is surrounded by Cs + ions and [Cs 8 PbBr 6 ] 4+ perovskite QDs being formed at the 32% of the center of a large cavity. Further, [Na 12 CsBr 8 ] 5+ QDs are formed at the very center of another 46% large cavities by combining Cs + , Na + , and Br - ions. The peak in the emission spectrum of Pb,Br,Cs,Na-A is similar to those of the CsPbBr 3 nanocrystal, Cs 4 PbBr 6 0-dimensional perovskite QDs, and Pb,Br,H,Cs,Na-FAU(X and Y). This work demonstrates that Pb,Br,Cs,Na-A can be produced using a simplified solvent-free synthesis procedure, which exhibits excellent stability against moisture and heat. Moreover, through a straightforward process, various quantum dots (QDs) can be incorporated into zeolite cavities to develop materials with variety photoluminescent properties.

Use of a template triggers an epitaxial interaction with the depositing material during synthesis. Recent studies have demonstrated that two-dimensional tellurium (tellurene) can be directionally oriented when grown on transition metal dichalcogenide (TMD) templates. Specifically, employing a T-phase TMD, such as WTe 2 , restricts the growth direction even further due to its anisotropic nature, which allows for the synthesis of well-oriented tellurene films. Despite this, producing large-area epitaxial films still remains a significant challenge. Here, we report the continuous synthesis of a 1T'-MoTe 2 template via chemical vapor deposition and tellurene via vapor transport. The interaction between helical Te and the 1T'-MoTe 2 template facilitates the Te chains to collapse into ribbon shapes, enhancing lateral growth at a rate approximately 6 times higher than in the vertical direction, as confirmed by scanning electron microscopy and atomic force microscopy. Interestingly, despite the predominance of the lateral growth, cross-sectional transmission electron microscopy analysis of the tellurene ribbons revealed a consistent 60-degree incline at the edges. This suggests that the edges of the tellurene ribbons, where they contact the template surface, are favorable sites for additional Te absorption, which then stacks along the incline angle to expand. Furthermore, controlling the synthesis temperature, duration, and preheating time has facilitated the successful synthesis of tellurene films. The resultant tellurene exhibited hole mobility as high as ∼400 cm 2 /V s. After removing the underlying metallic template with plasma treatment, the film showed a current on/off ratio of ∼10 3 . This ratio was confirmed by two-terminal field-effect transistor measurements and supported by near-field terahertz (THz) spectroscopy mapping.

Understanding the saturated vapor pressure ( P vap ) is vital for evaluating atomic layer deposition (ALD) precursors, as it directly influences the ALD temperature window and, by extension, the processability of compounds. The early estimation of vapor pressure ranges is crucial during the initial stages of novel precursor design, reducing the reliance on empirical synthesis or experimentation. However, predicting vapor pressure through computer simulations is often impeded by the scarcity of suitable empirical force fields for molecular dynamics simulations. This challenge is further compounded by the diverse chemical substances and the introduction of new elements into modern ALD processes, necessitating robust force fields that can accommodate metals, organics, and halides. In response, this study introduces a novel approach utilizing a quantum mechanically derived force field for the prediction of vapor pressure across a wide spectrum of potential ALD precursors. This approach enables the creation of system-specific force fields through parametrization based on ab initio calculations for a single molecule. We develop a comprehensive workflow to simulate both liquid and gaseous equilibrium phases, allowing the calculation of vapor pressure across a wide temperature range. Our methodology has been validated with a diverse set of ALD precursors, demonstrating its robustness in predicting P vap at specified temperatures. The approach yields a Pearson's correlation coefficient ( R 2 ) greater than 0.9 on a logarithmic scale and a root-mean-squared deviation in self-solvation-free energies as low as 1.3 kcal mol -1 . This innovative workflow, which does not require any prior experimental data, marks a significant advancement in the computer-aided design of novel ALD precursors, paving the way for accelerating developments in technology.

Inducing strain in the lattice effectively enhances the intrinsic activity of electrocatalysts by shifting the metal's d-band center and tuning the binding energy of reaction intermediates. NiFe-layered double hydroxides (NiFe LDHs) are promising electrocatalysts for the oxygen evolution reaction (OER) due to their cost-effectiveness and high catalytic activity. The distorted β-NiOOH phase produced by the Jahn-Teller effect under the oxidation polarization is known to exhibit superior catalytic activity, but it eventually transforms to the undistorted γ-NiOOH phase during the OER process. Such a reversible lattice distortion limits the OER activity. In this study, we propose a facile boron tungstate (BWO) anion intercalation method to induce irreversible lattice distortion in NiFe LDHs, leading to significantly enhanced OER activity. Strong interactions with BWO anions induce significant stress on the LDH's metal-hydroxide slab, leading to an expansion of metal-oxygen bonds and subsequent lattice distortion. In situ Raman spectroscopy revealed that lattice-distorted NiFe LDHs (D-NiFe LDHs) stabilize the β-NiOOH phase under the OER conditions. Consequently, D-NiFe LDHs exhibited low OER overpotentials (209 and 276 mV for 10 and 500 mA cm -2 , respectively), along with a modest Tafel slope (33.4 mV dec -1 ). Moreover, D-NiFe LDHs demonstrated excellent stability at 500 mA cm -2 for 50 h, indicating that the lattice distortion of the LDHs is irreversible. The intercalation-induced lattice strain reported in this study can provide a general strategy to enhance the activity of electrocatalysts.

The clustered regularly interspaced short palindromic repeat/Cas (CRISPR/Cas) system is a powerful tool for nucleic acid detection owing to specific recognition as well as cis- and trans-cleavage capabilities. However, the sensitivity of CRISPR/Cas-based diagnostic approaches is determined by nucleic acid preamplification, which has several limitations. Here, we present a method for direct nucleic acid detection without preamplification, by combining the CRISPR/Cas12a system with signal enhancement based on light-up RNA aptamer transcription. We first designed two DNA templates to transcribe the light-up RNA aptamer and kleptamer (Kb) RNA: the first DNA template encodes a Broccoli RNA aptamer for fluorescence signal generation, and the Kb DNA template comprises a dsDNA T7 promoter sequence and an ssDNA sequence that encodes an antisense strand for the Broccoli RNA aptamer. Hepatitis B virus (HBV) target recognition activates a CRISPR/Cas12a complex, leading to the catalytic cleavage of the ssDNA sequence. Transcription of the added Broccoli DNA template can then produce several Broccoli RNA aptamer transcripts for fluorescence enhancement. The proposed strategy exhibited excellent sensitivity and specificity with 22.4 fM detection limit, good accuracy, and stability for determining the target HBV dsDNA in human serum samples. Overall, this newly designed signal enhancement strategy can be employed as a universal sensing platform for ultrasensitive nucleic acid detection.

Solution-based processing of van der Waals (vdW) one- (1D) and two-dimensional (2D) materials is an effective strategy to obtain high-quality molecular chains or atomic sheets in a large area with scalability. In this work, quasi-1D vdW Ta 2 Pt 3 Se 8 was exfoliated via liquid phase exfoliation (LPE) to produce a stably dispersed Ta 2 Pt 3 Se 8 nanowire solution. In order to screen the optimal exfoliation solvent, nine different solvents were employed with different total surface tensions and polar/dispersive (P/D) component (P/D) ratios. The LPE behavior of Ta 2 Pt 3 Se 8 was elucidated by matching the P/D ratios between Ta 2 Pt 3 Se 8 and the applied solvent, resulting in N -methyl-2-pyrrolidone (NMP) as an optimal solvent owing to the well-matched total surface tension and P/D ratio. Subsequently, Ta 2 Pt 3 Se 8 nanowire thin films are manufactured via vacuum filtration using a Ta 2 Pt 3 Se 8 /NMP dispersion. Then, gas sensing devices are fabricated onto the Ta 2 Pt 3 Se 8 nanowire thin films, and gas sensing property toward NO 2 is evaluated at various thin-film thicknesses. A 50 nm thick Ta 2 Pt 3 Se 8 thin-film device exhibited a percent response of 25.9% at room temperature and 32.4% at 100 °C, respectively. In addition, the device showed complete recovery within 14.1 min at room temperature and 3.5 min at 100 °C, respectively.

Magnetic anisotropy in atomically thin correlated heterostructures is essential for exploring quantum magnetic phases for next-generation spintronics. Whereas previous studies have mostly focused on van der Waals systems, here we investigate the impact of dimensionality of epitaxially grown correlated oxides down to the monolayer limit on structural, magnetic, and orbital anisotropies. By designing oxide superlattices with a correlated ferromagnetic SrRuO 3 and nonmagnetic SrTiO 3 layers, we observed modulated ferromagnetic behavior with the change of the SrRuO 3 thickness. Especially, for three-unit-cell-thick layers, we observe a significant 1500% improvement of the coercive field in the anomalous Hall effect, which cannot be solely attributed to the dimensional crossover in ferromagnetism. The atomic-scale heterostructures further reveal the systematic modulation of anisotropy for the lattice structure and orbital hybridization, explaining the enhanced magnetic anisotropy. Our findings provide valuable insights into engineering the anisotropic hybridization of synthetic magnetic crystals, offering a tunable spin order for various applications.

Hypoxia is a representative tumor characteristic associated with malignant progression in clinical patients. Engineered in vitro models have led to significant advances in cancer research, allowing for the investigation of cells in physiological environments and the study of disease mechanisms and processes with enhanced relevance. In this study, we propose a U-shape pillar strip for a 3D cell-lumped organoid model (3D-COM) to study the effects of hypoxia on lung cancer in a high-throughput manner. We developed a U-pillar strip that facilitates the aggregation of PDCs mixed with an extracellular matrix to make the 3D-COM in 384-plate array form. The response to three hypoxia-activated prodrugs was higher in the 3D-COM than in the 2D culture model. The protein expression of hypoxia-inducible factor 1 alpha (HIF-1α) and HIF-2α, which are markers of hypoxia, was also higher in the 3D-COM than in the 2D culture. The results show that 3D-COM better recapitulated the hypoxic conditions of lung cancer tumors than the 2D culture. Therefore, the U-shape pillar strip for 3D-COM is a good tool to study the effects of hypoxia on lung cancer in a high-throughput manner, which can efficiently develop new drugs targeting hypoxic tumors.

Although the number of patients with eye diseases is increasing, efficient drug delivery to the posterior segment of the eyeball remains challenging. The reasons include the unique anatomy of the eyeball, the blood-aqueous barrier, the blood-retina barrier, and drug elimination via the anterior chamber and uveoscleral routes. Solutions to these obstacles for therapeutic delivery to the posterior segment will increase the efficacy, efficiency, and safety of ophthalmic treatment. Micro/nanorobots are promising tools to deliver therapeutics to the retina under the direction of an external magnetic field. Although many groups have evaluated potential uses of micro/nanorobots in retinal treatment, most experiments have been performed under idealized in vitro laboratory conditions and thus do not fully demonstrate the clinical feasibility of this approach. This study examined the use of magnetic nanoparticles (MNPs) to deliver dexamethasone, a drug widely used in retinal disease treatment. The MNPs allowed sustainable drug release and successful magnetic manipulation inside bovine vitreous humor and the vitreous humor of living rabbits. Therefore, controlled drug distribution via magnetic manipulation of MNPs is a promising strategy for targeted drug delivery to the retina., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Carbon dioxide (CO 2 ) conversion into value-added chemicals/fuels by utilizing solar energy is a sustainable way to mitigate our dependence on fossil fuels and stimulate a carbon-neutral economy. However, the efficient and affordable conversion of CO 2 is still an ongoing challenge. Here, we report an interfacially synthesized visible-light-active Ni(II)-integrated covalent organic frameworks (TaTpBpy-Ni COFs) film as a photocatalyst for efficient CO 2 conversion into carboxylic acid under ambient conditions. Notably, the TaTpBpy-Ni COFs film showed excellent photocatalytic activity for the carboxylation of various arylamines with CO 2 to the corresponding arylcarboxylic acid via C-N bond activation under solar-light irradiation. Moreover, this carboxylation protocol exhibits mild reaction conditions and good functional group tolerance without the necessity of using stoichiometric metallic reductants. This work shows a benchmark example of not only the interfacially synthesized COFs film used as a photocatalyst for solar-light energy utilization but also the selective solar chemical production system of arylcarboxylic acid directly from CO 2 .

To propel electronic skin (e-skin) to the next level by integrating artificial intelligence features with advanced sensory capabilities, it is imperative to develop stretchable memory device technology. A stretchable memory device for e-skin must offer, in particular, long-term data storage while ensuring the security of personal information under any type of deformation. However, despite the significance of these needs, technology related to stretchable memory devices remains in its infancy. Here, we report an intrinsically stretchable floating gate (FG) polymer memory transistor. The device features a dual-stimuli (optical and electrical) writing system to prevent easy erasure of recorded data. An FG comprising an intermixture of Ag nanoparticles and elastomer and with proper energy-band alignment between the semiconductor and dielectric facilitated sustainable memory performance, while achieving a high memory on/off ratio (>10 5 ) and a long retention time (10 6 s) with the ability to withstand 50% uniaxial or 30% biaxial strain. In addition, our memory transistor exhibited high mechanical durability over multiple stretching cycles (1000 times), along with excellent environmental stability with respect to factors such as temperature, moisture, air, and delamination. Finally, we fabricated a 7 × 7 active-matrix memory transistor array for personalized storage of e-skin data and successfully demonstrated its functionality.

We selectively improved the viewing angle characteristics and light extraction efficiency of blue thermally activated delayed fluorescence (TADF) organic light-emitting diodes (OLEDs) by tailoring a nanofiber-shaped Si 3 N 4 layer, which was used as an internal scattering layer. The diameter of the polymer nanofibers changed according to the mass ratio of polyacrylonitrile (PAN) and poly(methyl methacrylate) (PMMA) in the polymer solution for electrospinning. The Si 3 N 4 nanofiber (SNF) structure was fabricated by etching an Si 3 N 4 film using the PAN/PMMA nanofiber as a mask, making it easier to adjust parameters, such as the diameter, open ratio, and height, even though the SNF structure was randomly shaped. The SNF structures exhibited lower transmittance and higher haze with increasing diameter, showing little correlation with their height. However, all the structures demonstrated a total transmittance of over 80%. Finally, by applying the SNF structures to the blue TADF OLEDs, the external quantum efficiency was increased by 15.6%. In addition, the current and power efficiencies were enhanced by 23.0% and 25.6%, respectively. The internal light-extracting SNF structure also exhibited a synergistic effect with the external light-extracting structure. Furthermore, when the viewing angle changed from 0° to 60°, the peak wavelength and CIE coordinate shift decreased from 20 to 6 nm and from 0.0561 to 0.0243, respectively. These trends were explained by the application of Snell's law to the light path and were ultimately validated through finite-difference time-domain simulations.

Robust ferroelectricity in HfO 2 -based ultrathin films has the potential to revolutionize nonvolatile memory applications in nanoscale electronic devices because of their compatibility with the existing Si technology. However, to fully exploit the potential of ferroelectric HfO 2 -based thin films, it is crucial to develop strategies for the controlled stabilization of various HfO 2 -based polymorphs in nanoscale heterostructures. This study demonstrates how substrate-orientation-induced anisotropic strain can engineer the crystal symmetry, structural domain morphology, and growth orientation of ultrathin Hf 0.5 Zr 0.5 O 2 (HZO) films. Epitaxial ultrathin HZO films were grown on the heterostructures of (001)- and (110)-oriented La 2/3 Sr 1/3 MnO 3 /SrTiO 3 (LSMO/STO) substrate. Various structural analyses revealed that the (110)-oriented substrate promotes a higher degree of structural order (crystallinity) with improved stability of the (111)-oriented orthorhombic phase ( Pca 2 1 ) of HZO. Conversely, the (001)-oriented substrate not only induces a distorted orthorhombic structure but also facilitates the partial stabilization of nonpolar phases. Electrical measurements revealed robust ferroelectric properties in epitaxial thin films without any wake-up effect, where the well-ordered crystal symmetry stabilized by STO(110) facilitated better ferroelectric characteristics. This study suggests that tuning the epitaxial growth of ferroelectric HZO through substrate orientation can improve the stability of the metastable ferroelectric orthorhombic phase and thereby offer a better understanding of device applications.

The development of a stable roll-to-roll (R2R) process for flexible large-area perovskite solar cells (PSCs) and modules is a pressing challenge. In this study, we introduced a new R2R PSC manufacturing system that employs a two-step deposition method for coating perovskite and uses intensive pulsed light (IPL) for annealing. This system has successfully fabricated small-sized cells and the first-ever large-sized, R2R-processed flexible modules. A key focus of our work was to accelerate the conversion of PbI 2 to perovskite. To this end, we utilized IPL annealing and incorporated additives into the PbI 2 layer. With these modifications, the R2R-processed perovskite films achieved a power conversion efficiency (PCE) of 16.87%, representing the highest reported value for R2R two-step processed PSCs. However, these cells exhibited hysteresis in reverse and forward PCE measurements. To address this, we introduced a dual-annealing process consisting of IPL followed by a 2-min thermal heating step. This approach successfully reduced hysteresis, resulting in low-hysteresis, R2R-processed flexible PSCs. Moreover, we fabricated large-scale flexible modules (10 × 10 cm 2 ) with a PCE of 11.25% using the dual-annealing system, marking a significant milestone in this field.

The functional properties of complex oxides, including magnetism and ferroelectricity, are closely linked to subtle structural distortions. Ultrafast optical excitations provide the means to manipulate structural features and ultimately to affect the functional properties of complex oxides with picosecond-scale precision. We report that the lattice expansion of multiferroic BiFeO 3 following above-bandgap optical excitation leads to distortion of the oxygen octahedral rotation (OOR) pattern. The continuous coupling between OOR and strain was probed using time-resolved X-ray free-electron laser diffraction with femtosecond time resolution. Density functional theory calculations predict a relationship between the OOR and the elastic strain consistent with the experiment, demonstrating a route to employing this approach in a wider range of systems. Ultrafast control of the functional properties of BiFeO 3 thin films is enabled by this approach because the OOR phenomena are related to ferroelectricity, and via the Fe-O-Fe bond angles, the superexchange interaction between Fe atoms.

Lipid droplets (LDs) store energy and supply fatty acids and cholesterol. LDs are a hallmark of chronic nonalcoholic fatty liver disease (NAFLD). Recently, studies have focused on the role of hepatic macrophages in NAFLD. Green fluorescent protein (GFP) is used for labeling the characteristic targets in bioimaging analysis. Cx3cr1 -GFP mice are widely used in studying the liver macrophages such as the NAFLD model. Here, we have developed a tool for two-photon microscopic observation to study the interactions between LDs labeled with LD2 and liver capsule macrophages labeled with GFP in vivo. LD2 , a small-molecule two-photon excitation fluorescent probe for LDs, exhibits deep-red (700 nm) fluorescence upon excitation at 880 nm, high cell staining ability and photostability, and low cytotoxicity. This probe can clearly observe LDs through two-photon microscopy (TPM) and enables the simultaneous imaging of GFP + liver capsule macrophages (LCMs) in vivo in the liver capsule of Cx3cr1 -GFP mice. In the NAFLD mouse model, Cx3cr1 + LCMs and LDs increased with the progress of fatty liver disease, and spatiotemporal changes in LCMs were observed through intravital 3D TPM images. LD2 will aid in studying the interactions and immunological roles of hepatic macrophages and LDs to better understand NAFLD.

Molecular carriers are necessary for the controlled release of drugs and genes to achieve the desired therapeutic outcomes. DNA hydrogels can be a promising candidate in this application with their distinctive sequence-dependent programmability, which allows precise encapsulation of specific cargo molecules and stimuli-responsive release of them at the target. However, DNA hydrogels are inherently susceptible to the degradation of nucleases, making them vulnerable in a physiological environment. To be an effective molecular carrier, DNA hydrogels should be able to protect encapsulated cargo molecules until they reach the target and release them once they are reached. Here, we develop a simple way of controlling the enzyme resistance of DNA hydrogels for cargo protection and release by using cation-mediated condensation and expansion. We found that DNA hydrogels condensed by spermine are highly resistant to enzymatic degradation. They become degradable again if expanded back to their original, uncondensed state by sodium ions interfering with the interaction between spermine and DNA. These controllable condensation, expansion, and degradation of DNA hydrogels pave the way for the development of DNA hydrogels as an effective molecular carrier.

MXenes are highly versatile and conductive 2D materials that can significantly enhance the triboelectric properties of polymer nanocomposites. Despite the growing interest in the tunable chemistry of MXenes for energy applications, the effect of their chemical composition on triboelectric power generation has yet to be thoroughly studied. Here, we investigate the impact of the chemical composition of MXenes, specifically the Ti 3 CNT x carbonitride vs the most studied carbide, Ti 3 C 2 T x , on their interactions with sodium alginate biopolymer and, ultimately, the performance of a triboelectric nanogenerator (TENG) device. Our results show that adding 2 wt % of Ti 3 CNT x to alginate produces a synergistic effect that generates a higher triboelectric output than the Ti 3 C 2 T x system. Spectroscopic analyses suggest that a higher oxygen and fluorine content on the surface of Ti 3 CNT x enhances hydrogen bonding with the alginate matrix, thereby increasing the surface charge density of the alginate oxygen atoms. This was further supported by Kelvin probe force microscopy, which revealed a more negative surface potential on Ti 3 CNT x -alginate, facilitating high charge transfer between the TENG electrodes. The optimized Ti 3 CNT x -alginate nanogenerator delivered an output of 670 V, 15 μA, and 0.28 W/m 2 . Additionally, we demonstrate that plasma oxidation of the MXene surface further enhances triboelectric performance. Due to the diverse surface terminations of MXene, we show that Ti 3 CNT x -alginate can function as either tribopositive or tribonegative material, depending on the counter-contacting material. Our findings provide a deeper understanding of how MXene composition affects their interaction with biopolymers and resulting tunable triboelectrification behavior. This opens up new avenues for developing flexible and efficient MXene-based TENG devices.

Transition metal dichalcogenides (TMDs) are promising candidates for ultrathin functional semiconductor devices. In particular, incorporating plasmonic nanoparticles into TMD-based devices enhances the light-matter interaction for increased absorption efficiency and enables control of device performance such as electronic, electrical, and optical properties. In this heterohybrid structure, manipulating the number of TMD layers and the aggregate size of plasmonic nanoparticles is a straightforward approach to tailoring device performance. In this study, we use photoluminescence (PL) spectroscopy, which is a commonly employed technique for monitoring device performance, to analyze the changes in electronic and optical properties depending on the number of MoS 2 layers and the size of the gold nanoparticle (AuNP) aggregate under nonresonant and resonant excitation conditions. The PL intensity in monolayer MoS 2 /AuNPs increases as the size of aggregates increases irrespective of the excitation conditions. The strain induced by AuNPs causes a red shift, but as the aggregates grow larger, the effect of p-doping increases and the blue shift becomes prominent. In multilayer MoS 2 /AuNPs, quenched PL intensity is observed under nonresonant excitation, while enhancement is noted under resonant excitation, which is mainly contributed by p-doping and LSPR, respectively. Remarkably, the alteration in the spectral shape due to resonant excitation is evident solely in small aggregates of AuNPs across all layers., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

With the escalating global awareness of air quality management, the need for continuous and reliable monitoring of toxic gases by using low-power operating systems has become increasingly important. One of which, semiconductor metal oxide gas sensors have received great attention due to their high/fast response and simple working mechanism. More specifically, self-heating metal oxide gas sensors, wherein direct thermal activation in the sensing material, have been sought for their low power-consuming characteristics. However, previous works have neglected to address the temperature distribution within the sensing material, resulting in inefficient gas response and prolonged response/recovery times, particularly due to the low-temperature regions. Here, we present a unique metal/metal oxide/metal (MMOM) nanowire architecture that conductively confines heat to the sensing material, achieving high uniformity in the temperature distribution. The proposed structure enables uniform thermal activation within the sensing material, allowing the sensor to efficiently react with the toxic gas. As a result, the proposed MMOM gas sensor showed significantly enhanced gas response (from 6.7 to 20.1% at 30 ppm), response time (from 195 to 17 s at 30 ppm), and limit of detection (∼1 ppm) when compared to those of conventional single-material structures upon exposure to carbon monoxide. Furthermore, the proposed work demonstrated low power consumption (2.36 mW) and high thermal durability (1500 on/off cycles), demonstrating its potential for practical applications in reliable and low-power operating gas sensor systems. These results propose a new paradigm for power-efficient and robust self-heating metal oxide gas sensors with potential implications for other fields requiring thermal engineering.

Preventing ferroelectric materials from losing their ferroelectricity over a low thickness of several nanometers is crucial in developing multifunctional nanoelectronics. Epitaxially grown 5 at. % yttrium-doped Hf 0.5 Zr 0.5 O 2 (YHZO) thin films exhibit an atomically smooth surface, an ability to maintain ferroelectricity even at a thickness of 10 nm, and excellent insulating properties, making them suitable for use as gate oxides in ferroelectric thin film transistors (FeTFTs). Through the epitaxial growth of a YHZO/La 0.67 Sr 0.33 MnO 3 (LSMO)/SrTiO 3 (STO) heterostructure, YHZO effectively retains its ferroelectricity and orthorhombic single phase, leading to enhancing electron mobility (∼19.74 cm 2 V -1 s -1 ) and memory window (3.7 V) in the amorphous InGaZnO 4 (a-IGZO)/YHZO/LSMO/STO FeTFTs. These FeTFTs demonstrate a consistent memory function with remarkable endurance (∼10 6 cycles) and retention (∼10 4 s). Furthermore, they sustain a constant memory window even under ±6 V bias stress for 10 4 s and exhibit excellent stability even under ±6 V/1 ms pulse cycling for 10 7 cycles. For comparison, a transistor with the same structure was fabricated using epitaxial nonferroelectric LaAlO 3 (LAO) and epitaxial undoped Hf 0.5 Zr 0.5 O 2 (HZO) as alternatives to YHZO. This study presents a novel approach to exploit the potential of YHZO in FeTFTs, contributing to the development of next-generation logic-in-memory.

Porous thermoelectric materials offer exciting prospects for improving the thermoelectric performance by significantly reducing the thermal conductivity. Nevertheless, porous structures are affected by issues, including restricted enhancements in performance attributed to decreased electronic conductivity and degraded mechanical strength. This study introduces an innovative strategy for overcoming these challenges using porous Bi 0.4 Sb 1.6 Te 3 (BST) by combining porous structuring and interface engineering via atomic layer deposition (ALD). Porous BST powder was produced by selectively dissolving KCl in a milled mixture of BST and KCl; the interfaces were engineered by coating ZnO films through ALD. This novel architecture remarkably reduced the thermal conductivity owing to the presence of several nanopores and ZnO/BST heterointerfaces, promoting efficient phonon scattering. Additionally, the ZnO coating mitigated the high resistivity associated with the porous structure, resulting in an improved power factor. Consequently, the ZnO-coated porous BST demonstrated a remarkable enhancement in thermoelectric efficiency, with a maximum zT of approximately 1.53 in the temperature range of 333-353 K, and a zT of 1.44 at 298 K. Furthermore, this approach plays a significant role in enhancing the mechanical strength, effectively mitigating a critical limitation of porous structures. These findings open new avenues for the development of advanced porous thermoelectric materials and highlight their potential for precise interface engineering through the ALD.

The study introduces a novel maleamate-based prosthetic group specifically designed for efficient, site-specific radioiodination of biomolecules that contain or are modified with cysteine residues. This strategy is a compelling alternative to the conventional maleimide-based approach, demonstrating outstanding attributes such as high radiochemical yield, rapid reaction kinetics, applicability in aqueous media at neutral pH, and exceptional stability under a competitive environment., Competing Interests: The authors declare no competing financial interest., (© 2024 American Chemical Society.)

Proximity-dependent biotinylation (PDB) techniques provide information about the molecular neighborhood of a protein of interest, yielding insights into its function and localization. Here, we assessed how different labeling enzymes and streptavidin resins influence PDB results. We compared the high-confidence interactors of the DNA/RNA-binding protein transactive response DNA-binding protein 43 kDa (TDP-43) identified using either miniTurbo (biotin ligase) or APEX2 (peroxidase) enzymes. We also evaluated two commercial affinity resins for purification of biotinylated proteins: conventional streptavidin sepharose versus a new trypsin-resistant streptavidin conjugated to magnetic resin, which significantly reduces the level of contamination by streptavidin peptides following on-bead trypsin digestion. Downstream analyses involved liquid chromatography coupled to mass spectrometry in data-dependent acquisition mode, database searching, and statistical analysis of high-confidence interactors using SAINTexpress. The APEX2-TDP-43 experiment identified more interactors than miniTurbo-TDP-43, although miniTurbo provided greater overlap with previously documented TDP-43 interactors. Purifications on sepharose resin yielded more interactors than magnetic resin in small-scale experiments using a range of magnetic resin volumes. We suggest that resin-specific background protein binding profiles and different lysate-to-resin ratios cumulatively affect the distributions of prey protein abundance in experimental and control samples, which impact statistical confidence scores. Overall, we highlight key experimental variables to consider for the empirical optimization of PDB experiments.

In this study, two novel multiple resonance (MR) emitters, DtCzBN and Cy-DtCzBN, were designed based on the well-known BCzBN structure and synthesized for narrowband solution-processed organic light-emitting diodes (OLEDs). Cy-DtCzBN possesses a dimeric V-shaped structure formed by coupling two individual DtCzBN units via a nonconjugated cyclohexane linker. When compared with DtCzBN, Cy-DtCzBN, as a medium-sized molecule, was found to maintain the optical and photophysical properties of the corresponding monomeric unit, DtCzBN, but exhibits high thermal stability, excellent solubility, and good film-forming ability. Additionally, solution-processed OLEDs were fabricated by using two sets of molecules: one set of small molecular hosts and emitters (i.e., mCP and DtCzBN) and the other set of medium-sized molecular hosts and emitters (i.e., Cy-mCP and Cy-DtCzBN). Notably, devices using medium-sized molecular hosts and emitters exhibited similar optical and photophysical properties but showed significantly improved reproducibility and thermal stability compared with those based on small molecular hosts and emitters. Our current study provides some insights into molecular design strategies for thermally stable hosts and emitters, which are highly suitable for solution-processed OLEDs.

Hot electrons are crucial for unraveling the intrinsic relationship between chemical reactions and charge transfer in heterogeneous catalysis. Significant research focused on real-time detection of reaction-driven hot electron flow (chemicurrent) to elucidate the energy conversion mechanisms, but it remains elusive because carrier generation contributes to only part of the entire process. Here, a theoretical model for quantifying the chemicurrent yield is presented by clarifying the contributions of hot carrier losses from the internal emission and multiple reflections. The experimental chemicurrent yield verifies our model with a reliable mean free path of hot electrons, emphasizing the importance of comprehensive consideration of the transport process besides hot electron generation. Moreover, Pt nanoparticles (NPs)-decorated Au/TiO 2 is examined, showing the role of NPs-induced carrier losses in the performance of catalytic nanodiodes. These findings are expected to contribute to understanding the hot electron detection efficiency and designing nanodiodes with enhanced hot carrier flow and catalytic activity.

Metal-organic frameworks (MOFs) have garnered attention across various fields due to their noteworthy features like high specific surface area, substantial porosity, and adjustable performance. In the realm of water treatment, MOFs exhibit great potential for eliminating pollutants such as organics, heavy metals, and oils. Nonetheless, the inherent powder characteristics of MOFs pose challenges in terms of recycling, pipeline blockage, and even secondary pollution in practical applications. Addressing these issues, the incorporation of MOFs into sponges proves to be an effective solution. Strategies like one-pot synthesis, in situ growth, and impregnation are commonly employed for loading MOFs onto sponges. This review comprehensively explores the synthesis strategies of MOFs and sponges, along with their applications in water treatment, aiming to contribute to the ongoing advancement of MOF materials.

Recently, there has been an escalating demand for advanced materials with superior magnetic properties, especially in the actuator domain. High coercivity ( H ci ), an essential magnetic property, is pivotal for programmable shape changes in magnetic actuators and profoundly affects their performance. In this study, a new Sm 2 Fe 17- x Cu x N 3 magnet with a high H ci was achieved by modifying the temperature of the reduction-diffusion process─lowering it from 900 to 700 °C through the introduction of Cu and finer control over the structure and morphology of the Sm 2 Fe 17- x Cu x N 3 magnetic component within the actuator composite. Consequently, the Sm 2 Fe 17- x Cu x N 3 magnet demonstrated a remarkable H ci of 11.5 kOe, eclipsing the value of 6.9 kOe attained by unalloyed Sm 2 Fe 17 N 3 at reduced temperatures. By capitalizing on the enhanced magnetic properties of the Sm 2 Fe 17- x Cu x N 3 composite and incorporating poly(ethylene glycol) into the elastomer matrix, we successfully fabricated a robust actuator. This innovative approach harnesses the strengths of hard magnets as actuators, offering stability under high-temperature conditions, precision control, longevity, wireless functionality, and energy efficiency, highlighting the vast potential of hard magnets for a range of applications.