Search

Kraft paper (KP) has the advantages of being biodegradable, recyclable, and environmentally friendly. It has a wide range of applications in paper packaging, food packaging, and other fields. However, the non-waterproof characteristic of KP limits its application in harsh environments or special paper packaging, etc. To solve the problem of poor water resistance of KP, a simple and efficient method is proposed to prepare superhydrophobic coatings on kraft paper (SKP) by spraying method using hydrophobic Nano-calcium carbonate (Nano-CaCO 3) particles and rosin (RA) as raw materials. Here, the micro-nano structures are mainly constructed by hydrophobic Nano-CaCO 3 particles, and RA is utilized as a binder to improve the adhesion between the nanoparticles and the paper. The results indicated that the water contact angle (WCA) of SKP reached 154.5° and the water sliding angle (WSA) was 3.2°. And after 34 h of immersion in water, the WCA of SKP surface can remain above 150°. It can also withstand 30 times of sandpaper abrasion and 30 times of tape peeling. Overall, SKP shows excellent stability, water resistance, stain resistance and self-cleaning. It is expected to protect important documents in harsh environments. [Display omitted] [ABSTRACT FROM AUTHOR]

The article offers a review of EcoSonic ESD paper, designed to safeguard sensitive materials like printed circuit boards and integrated circuits from electrostatic discharge while also providing corrosion inhibition, all without the need for complex application systems.

The work presents an experimental evaluation of the bonding strength of materials commonly used in printing industry, using double-sided adhesive tape and thermal adhesives. The study revealed changes in adhesive strength when bonding various types and structures of paper and cardboard surfaces, as well as laminated glossy and matte surfaces. The experimental study aims to identify surfaces that exhibit optimal adhesive tape adhesion. Moreover, there are also surfaces that should not be used with double-sided tape, but instead should be glued with thermal adhesives. In addition, the study examines the effect of different separation rates on the bond strength of these materials. The results provide valuable information about the adhesive properties of materials in the printing industry, providing useful information for professionals to optimize printing processes and ensure the production of high-quality and durable printed products. The data presented in this article can assist in selecting appropriate adhesives for a variety of printing applications, which will achieve consistent and reliable results and can greatly affect their quality and durability. [ABSTRACT FROM AUTHOR]

Historical photographs play a significant role as records, documenting the various stages of the history of Egypt and reflecting our identity and social, cultural, and religious values. Silver gelatin prints were the dominant positive printing processes in the 20th century. One of the most common forms of damage found among photographic collections is tears, which may result from improper handling and misuse, inappropriate storage, disasters, and other factors. In the past, tears were mended using pressure-sensitive tapes by amateurs and conservators. Over time, these tapes caused damage to the photographic surfaces since they oxidised, forming stains that are difficult and sometimes impossible to remove. Recently, many gel-based systems have been developed for use in the conservation of different cultural and historical materials, particularly paper artifacts. The aim of this research is to evaluate the efficacy of Klucel G and agar, as gel systems that are favoured by conservation specialists, in removing pressure-sensitive tapes from the surfaces of silver gelatin prints, as well as to study their effect on the photographs themselves. Organic solvents were added to the gel systems, and invaluable old photographs were used for this study. After treatment, samples were subjected to artificial ageing at a temperature of 80°C and 65% RH. Evaluation of the selected treatments was carried out through visual inspection, microscopic examination, colorimetric measurements, and attenuated total reflectance Fourier transform infrared spectroscopy. Results showed that both gel-based systems with mixed organic solvents gave great results compared to the conventional methods in terms of tape removal. However, colour change was detected in the case of agar gel-treated samples. Agarose gel may be a more proper option. [ABSTRACT FROM AUTHOR]

Copyright of Enfermería Nefrológica is the property of Sociedad Espanola de Enfermeria Nefrologica and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper presents the influence of superconducting tape insulation on the recovery time of superconducting fault current limiters. The analysis is based on the experimental results of short-circuit tests. The reduction in the thermal and dynamic effects of the passage of a fault current can be achieved by limiting the short-circuit time and the value of the surge current. An ideal fault current limiter is required to have almost zero impedance at operating currents and significant impedance at fault conditions. A superconducting fault current limiter (SFCL) meets these requirements under certain conditions. The recovery time—a very important parameter—shows the ability of the limiter to return to the superconducting state to be ready to limit the subsequent short circuit. The experimental results show that the recovery time can be significantly reduced with the application of thin-film insulation and an appropriate design of the conduction cooling of the HTS tape. [ABSTRACT FROM AUTHOR]

Automated tape placement (ATP) is an important automated process adopted for the fabrication of large composite components. Trajectory planning is the key link of ATP, which directly affects the precision and efficiency of the layup process and the quality of final products. Presently, most existing trajectory optimization methods for ATP focus on smooth surfaces. Nevertheless, as commercial CAD/CAM software generally uses NURBS (Non-uniform Rational B-Splines) for modelling, the difficulty of finding the solution and the low efficiency associated with the calculation process are inevitable. The discrete methods provide alternatives for designing layup trajectories, whereas their accuracy is seldom analysed. Furthermore, a path optimization algorithm for eliminating gap problems while preventing wrinkles on discrete models is rarely reported. In this paper, the adjustment of layup trajectories for ATP is considered on triangular meshes. First, the triangular mesh is reconstructed as a Nagata patch to recover the original geometry with good accuracy. Then, a numerical method for tracing desired paths on the Nagata patch set is provided and the computation efficiency is validated. Next, two optimization methodologies are proposed to improve the layup of composite tapes while avoiding wrinkles. Finally, the presented two strategies are examined on a discrete hyperbolic surface and a discrete freeform surface and some of the results are delivered. [ABSTRACT FROM AUTHOR]

Psoriasis is one of the most frequent chronic inflammatory skin diseases and exerts a significant psychological impact, causing stigmatization, low self-esteem and depression. The pathogenesis of psoriasis is remarkably complex, involving genetic, immune and environmental factors, some of which are still incompletely explored. The cutaneous microbiome has become more and more important in the pathogenesis of inflammatory skin diseases such as acne, rosacea, atopic dermatitis and psoriasis. Dysbiosis of the skin microbiome could be linked to acute flare ups in psoriatic disease, as recent studies suggest. Given this hypothesis, we conducted a study in which we evaluated the cutaneous microbiome of psoriasis patients and healthy individuals. In our study, we collected multiple samples using swab sampling, adhesive tape and punch biopsies. Our results are similar to other studies in which the qualitative and quantitative changes found in the cutaneous microbiome of psoriasis patients are different than healthy individuals. Larger, standardized studies are needed in order to elucidate the microbiome changes in psoriasis patients, clarify their role in the pathogenesis of psoriasis, decipher the interactions between the commensal microorganisms of the same and different niches and between microbiomes and the host and identify new therapeutic strategies. [ABSTRACT FROM AUTHOR]

For polyacrylate latex pressure-sensitive adhesives (PSAs), high peel strength is of crucial significance. It is not only a key factor for ensuring the long-lasting and effective adhesive force of polyacrylate latex PSAs but also can significantly expand their application scope in many vital fields, such as packaging, electronics, and medical high-performance composite materials. High peel strength can guarantee that the products maintain stable and reliable adhesive performance under complex and variable environmental conditions. However, at present, the peel strength capacity of polyacrylate latex PSAs is conspicuously insufficient, making it difficult to fully meet the urgent market demand for high peel strength, and severely restricting their application in many cutting-edge fields. Therefore, based on previous experimental studies, and deeply inspired by the adhesion mechanism of natural marine mussels, in this study, a traditional polyacrylate latex PSA was ingeniously graft-modified with 3,4-dihydroxybenzaldehyde (DHBA) through the method of monomer-starved seeded semi-continuous emulsion polymerization, successfully synthesizing novel high-peel-strength polyacrylate latex pressure-sensitive adhesives (HPSAs) with outstanding strong adhesion properties, and the influence of DHBA content on the properties of the HPSAs was comprehensively studied. The research results indicated that the properties of the modified HPSAs were comprehensively enhanced. Regarding the water resistance of the adhesive film, the minimum water absorption rate was 4.33%. In terms of the heat resistance of the adhesive tape, it could withstand heat at 90 °C for 1 h without leaving residue upon tape peeling. Notably, the adhesive properties were significantly improved, and when the DHBA content reached 4.0%, the loop tack and 180° peel strength of HPSA4 significantly increased to 5.75 N and 825.4 gf/25 mm, respectively, which were 2.5 times and 2 times those of the unmodified PSA, respectively. Such superior adhesive performance of HPSAs, on the one hand, should be attributed to the introduction of the bonding functional monomer DHBA with a rich polyphenol structure; on the other hand, the acetal structure formed by the grafting reaction of DHBA with the PSA effectively enhanced the spatial network and crosslink density of the HPSAs. In summary, in this study, the natural biological adhesion phenomenon was ingeniously utilized to increase the peel strength of pressure-sensitive adhesives, providing a highly forward-looking and feasible direct strategy for the development of environmentally friendly polyacrylate latex pressure-sensitive adhesives. [ABSTRACT FROM AUTHOR]

Adhesive joints are some of the oldest inseparable connections, and were used much earlier than other non-separable connections (e.g., welded, soldered). Adhesives are widely used in the manufacture of vehicles, household appliances, aircraft, and medicine. One disadvantage of adhesive joints is their long bonding time (amounting, for example, to 72 h for polyurethane adhesives used in bus roof bonding), and another is their production of harmful waste. Tapes that are adhesive coated on both sides are increasingly being used to join parts during production. Such tapes have lower strength than traditional adhesives, but their bonding time is much shorter. In addition, the amount of waste remaining after production is minimized. Tapes, like adhesives, dampen vibrations well and seal the materials being joined. The purpose of this study was to evaluate the influence of selected factors on the quality of tape–steel sheet joints and to assess the possibility of testing acrylic tape–steel sheet joints using ultrasonic methods. It was found that the preparation of a surface for bonding has a significant effect on the quality of the joint, and it was confirmed that non-destructive evaluation of the quality of the tested joints by the ultrasonic method is possible. The decibel drop in the height of the first and fifth pulses obtained on the screen of the ultrasonic defectoscope was proposed as an ultrasonic measure. The highest-quality joints were characterized by a measure in the range of 12 dB, lower-quality areas of about 8 dB, and tape-free areas of about 5 dB. At the same time, it was noted that in the case of proper surface preparation, there was cohesive failure of the joint during breakage. [ABSTRACT FROM AUTHOR]

The study aims to investigate the normal and oblique impact of an elastic sphere (tennis ball) on a granular surface (clay) and two different plastic tape lines. In this research, we model the impact force with a mathematical elastoplastic force model, and a differential approach is used. The model is applied for an impact with granular material (green clay) and plastic surfaces (line tapes). We investigated the normal and oblique impact dynamics of a sphere (tennis ball). The impact duration is divided into two phases: compression with an elastoplastic force and restitution with an elastic force. The laboratory experiments in various configurations are recorded with a high frame-per-second camera and analyzed using image processing methods. The mathematical model for the impact with rebounds is verified with the experimental set-up for the considered surfaces. The viscoelastic and elastic forces agree well with the experimental data. The impact parameters of the granular surface and plastic tapes are compared. The ANOVA test suggests robust statistical significance in the coefficient of restitution between granular surfaces and plastic tapes. Our force model for impact performs well, and the impact responses of the sphere on the granular surface and the plastic line tapes are significantly different. [ABSTRACT FROM AUTHOR]

The cutaneous microbiome represents a topic of high interest nowadays. Multiple studies have suggested the importance of the skin microbiome in different dermatological pathologies, highlighting the possible implications of cutaneous microorganisms in either the pathogenesis or prognosis of skin maladies. Psoriasis represents a common inflammatory skin disease, with a high prevalence in the worldwide population. The role of the cutaneous microbiome in psoriasis could explain a number of pathogenic theories and treatment objectives of this incurable skin disease. Our interest in the characteristics of the cutaneous microbiome, especially in psoriatic patients who attended a tertiary dermatological centre in Galati, Romania, is reflected in our current study, of which the preliminary results are discussed in this article. Using three types of skin sampling techniques (swabs, adhesive tape, and punch biopsies), we tried to characterise the microorganisms harboured in the skin of psoriatic patients and healthy individuals. This study was performed using culture-based probes, which were analysed using MALDI-TOF mass spectrometer equipment. Our preliminary results suggested that the greatest diversity was observed in the perilesional areas of psoriatic patients. The lowest cutaneous diversity was obtained from sampling psoriatic plaques. These results are similar to other studies of the cutaneous microbiome in psoriasis. The most frequent microorganisms found in all groups studied were of the Staphylococcus species: Staphylococcus epidermidis, Staphylococcus hominis, and Staphylococcus aureus. Analysing the living environment of each individual from this study, our preliminary results suggested different results from other studies, as higher diversity and heterogenicity was observed in urban environments than in rural living areas. Regarding the differences between sexes, our preliminary results showed higher quantitative and qualitative changes in the skin microbiome of male participants than female participants, opposite to the results found in other studies of the cutaneous microbiome in psoriasis. Given these preliminary results, we can conclude that we have found important differences by studying the cutaneous microbiome of psoriatic patients and healthy control individuals from a population that, to our knowledge, has not been yet studied from this point of view. Our results showed important characteristics of the skin microbiome in an Eastern European population, where cultural and environmental living habits could influence the cutaneous microbiome. [ABSTRACT FROM AUTHOR]

The tack of prepreg is a key factor affecting the automatic tape laying process. During the manufacturing process of large composite parts, prepreg material may be stored at room temperature for several days, resulting in a decrease in its tack. In this study, a new tack test tool was designed, and the decay rate of prepreg tack at different temperatures was tested. We proposed a prepreg tack decay model, which assumes that the main factor in tack decay is the reduction in resin chain activity during storage. The maximum deviation between the model calculation results and the experimental results of the tack decay rate is 9.7%. This study also proposed a new statistical unit for prepreg tack, which can establish the relationship between the tack of prepreg and its remaining storage time and reduce prepreg management costs. [ABSTRACT FROM AUTHOR]

Plants can autonomously adjust their growth direction based on the gravitropic response to maximize energy acquisition, despite lacking nerves and muscles. Endowing soft robots with gravitropism may facilitate the development of self‐regulating systems free of electronics, but remains elusive. Herein, acceleration‐regulated soft actuators are described that can respond to the gravitational field by leveraging the unique fluidity of liquid metal in its self‐limiting oxide skin. The soft actuator is obtained by magnetic printing of the fluidic liquid metal heater circuit on a thermoresponsive liquid crystal elastomer. The Joule heat of the liquid metal circuit with gravity‐regulated resistance can be programmed by changing the actuator's pose to induce the flow of liquid metal. The actuator can autonomously adjust its bending degree by the dynamic interaction between its thermomechanical response and gravity. A gravity‐interactive soft gripper is also created with controllable grasping and releasing by rotating the actuator. Moreover, it is demonstrated that self‐regulated oscillation motion can be achieved by interfacing the actuator with a monostable tape spring, allowing the electronics‐free control of a bionic walker. This work paves the avenue for the development of liquid metal‐based reconfigurable electronics and electronics‐free soft robots that can perceive gravity or acceleration. [ABSTRACT FROM AUTHOR]

Ensuring the tightness of buildings using self-adhesive tapes is one of the cost-effective, efficient, and reliable solutions. There is a lack of research, standards, and methodologies for construction adhesive tape, especially for assessing the functional properties of the tape after ageing. The aim of this work is to evaluate the tightness of different building surfaces and adhesive tape systems by conducting artificial ageing. It was found that adhesive tapes with an acrylic adhesive base ensured a fully sealed system. In all cases, tapes applied to surfaces such as plywood, gypsum plasterboard, cement-bonded particle board, plastered cement-bonded particle board, and plastic board provided sufficient sealing. The air permeability of the tapes on the OSB was two to seven times higher than that of the defined sealed system with other surfaces. In most cases, air permeability increased on OSB, gypsum plasterboard, and plastered cement-bonded particle board after ageing. The least problematic surface is the plastic board. In all tested cases, adequate sealing was observed after ageing, with only three of all tested tapes not providing sufficient bonding strength. [ABSTRACT FROM AUTHOR]

The NASICON-structured Na3MnZr(PO4)3 compound is a promising high-voltage cathode material for sodium-ion batteries (SIBs). In this study, an easy and scalable electrospinning approach was used to synthesize self-standing cathodes based on Na3MnZr(PO4)3 loaded into carbon nanofibers (CNFs). Different strategies were applied to load the active material. All the employed characterization techniques (X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), thermal gravimetric analysis (TGA), and Raman spectroscopy) confirmed the successful loading. Compared to an appositely prepared tape-cast electrode, Na3MnZr(PO4)3/CNF self-standing cathodes demonstrated an enhanced specific capacity, especially at high C-rates, thanks to the porous conducive carbon nanofiber matrix. Among the strategies applied to load Na3MnZr(PO4)3 into the CNFs, the electrospinning (vertical setting) of the polymeric solution containing pre-synthesized Na3MnZr(PO4)3 powders resulted effective in obtaining the quantitative loading of the active material and a homogeneous distribution through the sheet thickness. Notably, Na3MnZr(PO4)3 aggregates connected to the CNFs, covered their surface, and were also embedded, as demonstrated by TEM and EDS. Compared to the self-standing cathodes prepared with the horizontal setting or dip–drop coating methods, the vertical binder-free electrode exhibited the highest capacity values of 78.2, 55.7, 38.8, 22.2, 16.2, 12.8, 10.3, 9.0, and 8.5 mAh/g at C-rates of 0.05C, 0.1C, 0.2C, 0.5C, 1C, 2C, 5C, 10C, and 20C, respectively, with complete capacity retention at the end of the measurements. It also exhibited a good cycling life, compared to its tape-cast counterpart: it displayed higher capacity retention at 0.2C and 1C, and, after cycling 1000 cycles at 1C, it could be further cycled at 5C, 10C, and 20C. [ABSTRACT FROM AUTHOR]

3D-printed anodes for bioelectrochemical systems are increasingly being reported. However, comparisons between 3D-printed anodes and their non-3D-printed counterparts with the same material composition are still lacking. In addition, surface roughness parameters that could be correlated with bioelectrochemical performance are rarely determined. To fill these gaps, slurries with identical composition but different mass fractions were processed into SiOC anodes by tape-casting, freeze-casting, or direct-ink writing. The current generation was investigated using electroactive biofilms enriched with Geobacter spp. Freeze-cast anodes showed more surface pores and the highest surface kurtosis of 5.7 ± 0.5, whereas tape-cast and 3D-printed anodes showed a closed surface porosity. 3D-printing was only possible using slurries 85 wt% of mass fraction. The surface pores of the freeze-cast anodes improved bacterial adhesion and resulted in a high initial (first cycle) maximum current density per geometric surface area of 9.2 ± 2.1 A m−2. The larger surface area of the 3D-printed anodes prevented pore clogging and produced the highest current density per geometric surface area of 12.0 ± 1.2 A m−2. The current density values of all anodes are similar when the current density is normalized over the entire geometric surface as determined by CT-scans. This study highlights the role of geometric surface area in normalizing current generation and the need to use more surface roughness parameters to correlate anode properties, bacterial adhesion, and current generation. [ABSTRACT FROM AUTHOR]

This study explored the development of polyvinylpyrrolidone (PVP)–honey-gel (PHG) through 3D printing, aiming to develop a multifunctional bio-tape with adhesive and degradable properties. Based on the potential of honey to promote wound healing due to its antibacterial and anti-inflammatory properties, a PVP–honey-based 3D printing ink was developed by combining honey and PVP to create PHG through 3D printing technology that can form a film with strong adhesion and flexibility. First, the chemical–physical properties of PHG and its 3D printing performance were characterized. The line width achievable in 3D printing for the PHG line can extend to ∼100 µm. In addition, the adhesive properties of the PHG film were evaluated by using a 180° peeling test on various materials (glass, copper, wood, and pig skin), highlighting its potential for diverse applications. Finally, the application of the PHG film as a bio-tape was demonstrated through a successful animal experiment on a rabbit's skin wound. Due to its adhesive and degradable properties, the bio-tape exhibited 3D conformability and ease of removal without residue. [ABSTRACT FROM AUTHOR]

Composite coatings on the surface of a semi-continuous cast 7005 aluminum alloy under different aging treatments (T6, RRA, and FSA) are presented and characterized in this research. SiO2 combined with stearic acid (STA) modified by KH550 was utilized to achieve multifunctional superhydrophobic coatings. Adhesive tape adhesion, blade scratch, and mechanical wear tests were utilized to assess the durability of the superhydrophobic coatings. The results showed that the prepared coatings exhibited excellent superhydrophobicity, self-cleaning ability, and mechanical properties, especially the T6 temper alloy. This alloy had the largest CA value (156.5°) and the lowest SA value (4.3°). The composite coatings still exhibited excellent superhydrophobicity under mechanical damage. Furthermore, the alloys with STA/SiO2 displayed marvelous corrosion resistance efficiency. The T6 temper alloy with a protection rate of 73.8% had an approximately one-order-of-magnitude decrement in carrion current density. The composite coating can be effectively utilized in various industrial fields, thus extending its potential impact. [ABSTRACT FROM AUTHOR]

Due to the low adhesion observed at the interface between solid and liquid, superhydrophobic coatings hold significant promise for various applications, such as self-cleaning, anti-corrosion, anti-icing, and drag reduction. However, a notable challenge hindering their widespread adoption in these domains lies in their delicate durability. In this study, we propose a straightforward method for preparation. The fluorosilicone resin is initially discretized through a gradual introduction of nonsolvent into its solution, followed by thorough mixing and stirring with silica nanoparticles. The resulting mixture is then sprayed onto the substrate surface after drying, forming a self-similar, porous, and rough structure extending from top to bottom. This process yields a coating exhibiting excellent chemical and mechanical durability simultaneously. Using this approach, we achieved a superhydrophobic coating with a contact angle of 156° and a roll angle of 2.2°, with water droplet adhesion of only 10.8 ± 0.4 µN. Remarkably, the coating maintained excellent superhydrophobicity even after undergoing sandpaper abrasion (10 m), tape peeling (30 times), and prolonged water impact (60 min), showing its robust mechanical stability. Furthermore, following exposure to acid, alkali, and aqueous solutions (7 days), UV irradiation (10 days), and extreme temperature variations (–20 °C to 80 °C), the coatings retained their superhydrophobic properties and exhibited good chemical durability. This method offers a novel approach to enhance the durability and practicality of superhydrophobic coatings. [ABSTRACT FROM AUTHOR]

A porous anti-reflective coating (P-ARC) with average transmittance in the visible range of 97.9% was fabricated through the sol-gel method, followed by calcination at a relatively low temperature (220 °C) using the porogen of Laureth-5 carboxylic acid via a one-step approach. The results demonstrated the coating had an absolute value that was 7.5% higher than that of bare glass (92%). The prepared porous anti-reflective coating had a refractive index as low as 1.21. The coating remained undamaged during 3M tape stripping tests while maintaining excellent light transmittance. This work presents a film that has good thermal stability, chemical stability, and mechanical stability. [ABSTRACT FROM AUTHOR]

Simple Summary: Hair tubes provide a non-invasive method for determining the presence and activity of small mammals by evaluating hair left in hair tubes. Data can be converted into activity indices. In this study, a specially adapted program was developed to semi-automatically determine hair density as a proxy of activity. Adhesive tape with hair from a field experiment was processed, scanned, and analyzed by the program to obtain a quantitative measure of hair density. The validation of hair tubes with wildlife cameras in the field showed a moderate-to-strong positive correlation between hair tube data and recorded rodents. The program is simple but effective and does not require a large amount of deep learning data. Due to its reduced complexity, it facilitates error detection and fine-tuning. The use of hair tubes in combination with this program should provide an easy-to-use, non-invasive method to determine small mammal activity. Activity indices are used to determine the presence and activity of small mammals, such as the hair index derived from the use of hair tubes. In contrast to trapping animals, hair tubes are non-invasive and less labor-intensive, and appear to be a suitable alternative in appropriate settings. We developed a method to calculate hair density semi-automatically. In addition, hair tube data were validated with field data using wildlife cameras for the small mammal community in grassland, wheat crops, and hedges to assess how well data from hair tubes match data from wildlife cameras. Adhesive tape with hair from hair tubes was processed and scanned. The resulting images were analyzed using a newly developed computer program that enables background and adhesive tape to be automatically distinguished from hair, providing a quantitative measure of hair density. Based on validation with wildlife cameras, hair tubes seem to be a suitable tool to estimate small mammal activity at the community level in several habitats. There was a moderate-to-strong positive correlation of the hair tube index with the sum of voles and Apodemus individuals (activity index) recorded in grasslands (Spearman's correlation coefficient 0.43), hedges (0.79), and wheat (0.44). The newly developed computer program allows the automatic calculation of hair density, making it easier to assess the activity of small mammals. [ABSTRACT FROM AUTHOR]

Background: Polyethylene covers have been proven to be effective in protecting the eyes in patients with decreased or disappeared blink reflexes, but their advantages compared to other conventional methods are still unclear. This systematic review and meta-analysis study aimed to elucidate the impact of polyethylene covers in the prevention of ocular surface disease (OSD) in patients admitted to the intensive care unit (ICU). Methods: We searched the Scopus, PubMed, Web of Science, and Cochrane Central Register of Controlled Trials (CENTRAL) databases to identify randomized controlled trial studies. This study followed the PRISMA guidelines and used the Cochrane Collaboration tool to assess the risk of bias. Results: The findings were expressed as risk ratio (RR) with 95% confidence intervals. The incidence of OSD in the polyethylene cover group was lower than that in the eye drops group (RR = 0.27; 95% CI (0.07, 1.09), P = 0.07) and adhesive tape group (RR = 0.11, 95%CI (0.04, 0.31), P < 0:0001) but the polyethylene cover group showed no significant difference compared to the eye gel group (RR = 0.79, 95%CI (0.18, 3.51), P = 0.76) and the eye ointment group (RR = 0.85; 95% CI (0.36, 1.99), P = 0.71). Conclusion: This study showed that polyethylene covers, eye gels, and eye ointments had an equal effect on preventing OSD in ICU patients, and eye drops and adhesive tapes were relatively less effective. However, other intervention methods had not been compared due to the small number of articles. Hence, further studies should assess the available methods to choose the best practical method. [ABSTRACT FROM AUTHOR]

Sixteen-head automatic tape laying of non-crimped carbon-fibre-reinforced plastic is performed, and the fibre alignment is compared with that produced via hand laying. The effect of fibre alignment is tested via quasi-static and cyclic three-point bending tests. Using the Fill Multilayer (a 16-head tape-laying machine), precision fibre laying of unidirectional fabrics is performed with deliberate misalignment to examine the effect of fibre orientation and investigate the random effect on longitudinal misalignment. The automatic tape-layered coupons are compared with hand-layered carbon fibre tapes to investigate the relationship between the fibre alignment and the flexural strength. A 52% reduction in the fibre alignment scatter is achieved via the Fill Multilayer. Fibre orientation increases lead to a higher flexural strength of 16.08% for Fill Multilayer-made coupons compared with hand-layered samples. An investigation of the correlation between fibre alignment and flexural strength shows that shear-based failure increases exponentially as the alignment decreases. Fill Multilayer-made coupons have a higher void concentration due to ultrasonic welding, but also the highest modulus and flexural strength, as fibre misalignment is reduced to 1.68°, with a modulus degradation of 1.4%. [ABSTRACT FROM AUTHOR]

Background: Endotracheal tube fixation in ventilated patients must be appropriate to ensure security during mechanical ventilation and prevent skin lesions. The incidence of endotracheal tube‐caused pressure ulcers ranges from 7% to 45%. Various endotracheal tube fixations are used in intensive care units (ICUs) worldwide. By pressure exercised on the skin, these systems could lead to mucosal and skin peri-oral lesions. The main objective of this study is to evaluate the impact of the two fixation systems most commonly used in French ICUs (adhesive elastic band versus fixation cord with PolyVinyl Chloride (PVC) sheath) on the incidence of these peri-oral skin lesions. Methods: This studyis a multicenter, open-label, controlled, superiority, cluster cross-over randomized trial. 768 patients will be recruited in the 16 ICUs involved. The inclusion of patients will be carried out over two 12-month periods. Each site begins with one of the evaluated fixation systems: elastic adhesive tape or cord associated with a protective sheath. After a 4-month break, each site switches to the other fixation system. The primary outcome is the development of at least one peri-oral lesion during the first ten days of maintaining an orally inserted endotracheal tube. The presence of lesions is assessed by a blinded adjudication committee using photographs taken daily. Discussion: This study is the first multicenter, randomized trial designed to evaluate the impact of elastic adhesive tape versus fixation cord with PVC sheath on the incidence of peri-oral lesions. The results will provide data which could change and standardize care practices. Trial registration: https://www.clinicaltrials.gov. Reference number: NCT04819425. [ABSTRACT FROM AUTHOR]

The automation of the manufacturing processes of thermoplastic composite laminates has become dependent on open mold processes such as automated tape placement (ATP), which couples tape layering with in situ consolidation. The manufacturing parameters of ATP open mold processes, which comprise processing time, consolidation pressure and temperature, affect the bond strength between the plies and the quality of the laminates produced. Therefore, the effect of the manufacturing parameters should be characterized. This work experimentally evaluates the feasibility of fabricating thermoplastic laminates using an open mold process that reasonably models that of ATP. Glass fiber-reinforced polypropylene laminates are fabricated from unidirectional tapes under different consolidation periods, pressures, and temperatures. The bond quality in the produced laminates is assessed by measuring their interlaminar shear strength, which is measured using a short beam standardized shear test in conjunction with digital image correlation. Results show that consolidation can occur at temperatures slightly below the composite tapes' complete melting temperature, and consolidation times between 7 and 13 min can result in acceptable bond strengths. The results confirmed the feasibility of the process and highlighted its limitations. Analysis of variance and machine learning showed that the effect of process parameters on interlaminar shear strength is nonlinear. [ABSTRACT FROM AUTHOR]

Preparing a friction pair "polymer-metal" using improved polymeric composites is contemplated a complicated task due to the inert surface of the polymer. Gluing polymer composites with improved mechanical and tribological properties on metals and saving their unique properties at the same time is considered the best way to prepare slide bearing products based on polymer/metal. In this work, ultraviolet initiation is used after a process of mixed acid pre-treatment. The surface of highly oriented films based on ultra-high molecular weight polyethylene (UHMWPE)/graphene nanoplatelets (GNP) is grafted with nanocellulose. The grafting treatment is analyzed using Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and contact angle measurements. Mechanical T-peel tests showed that the peel strength for the treated UHMWPE films increased by three times, up to 1.9 kg/cm, in comparison to the untreated films. The tensile strength of the treated UHMWPE films decreased by about 6% to 788 MPa. Tribological tests showed that the values of both friction coefficient and wear intensity of the treated UHMWPE films were increased insignificantly, which were 0.172 and 15.43 µm/m·m2, respectively. The prepared adhesive tape based on UHMWPE films, which can withstand a weight of up to 6 kg per 1 cm2 of the bonded surface, has a low coefficient of friction, high wear resistance, and high strength, and is considered a promising material for preparing slide bearing products. [ABSTRACT FROM AUTHOR]

Background: Undesirable injuries during the intraoperative period, such as pressure injuries caused by improper positioning, medical devices, or adhesive tapes, can lead to patient harm and decreased satisfaction. This study aims to identify the risk factors of pressure injuries during the intraoperative period and the characteristics of these injuries. Methods: A retrospective case‑control study was conducted at King Khaled University Hospital in Riyadh, Saudi Arabia. Data were collected from the hospital incident reporting system and electronic medical records for incidents reported from January 1, 2022 to December 31, 2022. Inclusion criteria consisted of all patients with a reported pressure injury, including pressure ulcers, medical adhesive‑related skin injuries, or medical device‑related pressure injuries, occurring at least once during surgery. Results: Among the 113 patients, 57 (50.44%) had intraoperative pressure injuries (cases), while 56 (49.56%) did not (controls). The most common locations for pressure injuries were the lips (33.33%). Most of these injuries were classified as Medical Adhesive‑Related Skin Injury (61.40%). Stage 1 injuries were observed in 47 cases (82.46%), while Stage 2 injuries were observed in 10 cases (17.54%). Duration of surgery and device tightness were identified as significant risk factors (P < 0.001). Conclusion: This case‑control study identified the duration of surgery and device tightness as significant risk factors for intraoperative pressure injuries. The findings emphasize the importance of implementing evidence‑based prevention strategies. Healthcare professionals should prioritize staff education and training, while future research should focus on conducting prospective, multicenter studies and developing risk assessment tools and innovative medical devices. [ABSTRACT FROM AUTHOR]

• Accurate prediction of tape-spring folding behavior with new analytical model. • Proposed model outperforms classical models in predicting peak and steady-state moments. • Stretching and bending strain energy studied and analyzed during folding process. • Three key geometric parameters identified for optimizing tape-spring design. The tape-spring is widely used in aerospace, mechanical, and civil engineering due to its unique mechanical properties and compact size. This paper aims to establish a new analytical model to more accurately predict the folding behavior of the tape-spring, including the geometric configuration, folding moment versus longitudinal curvature curve, peak moment, and propagation moment. This model comprehensively considers the influence of stretching strain energy and bending strain energy on the total strain energy, and determines the folding behavior of the tape-spring through the minimum energy principle. The proposed analytical model was compared with Wuest's model, Yee's model, and Yao's model. Experiments of tape-springs made from two different materials were utilized for validation. The study shows that the proposed model has the highest prediction accuracy compared with the classical models, with the error of approximately 10%. The reason for the significant difference in the prediction results between the proposed model and Yao's model was given, and the relationship between stretching strain energy and bending strain energy during the folding process of the tape-spring was analyzed. The proposed model has broader applicability than classical models and provides new insights and solutions for accurate prediction of the folding behavior of the tape-spring. [ABSTRACT FROM AUTHOR]

The insulating structure near the slot outlet of high-voltage generator stator coils is the typical bushing structure, which is prone to corona and has a decisive impact on the safety of the generator. In engineering, nonlinear resistance anti-corona tapes are usually bound with around the main insulation surface of the stator coils near the slot, to achieve the effect of homogenizing the electric field. Usually, the resistance nonlinearity is increased by adding semi conductive or conductive materials into the anti-corona tape. However, after the process of adding semi conductive or conductive materials, the breakdown strength of anti-corona tape is often reduced, resulting in that anti-corona tapes with good nonlinear cannot be applied. In order to have both good nonlinear resistance and breakdown strength, epoxy resin (EP) is used as a matrix, which is blended with one-dimensional structured carboxyl-functionalized multi-walled carbon nanotubes (MWCNTs) and zero-dimensional structured polyaniline (PANI) to obtain nonlinearly good materials in this paper. The nonlinear conductivity characteristics and breakdown characteristics were tested separately. The results show that compared to MWCNTs/EP composite materials, PANI-MWCNTs/EP composite materials have higher nonlinear coefficients and breakdown strength. The breakdown field strength of 0.5wt% MWCNTs/EP composites is 2.11 kV/mm, and the nonlinear coefficient is 1.41. In contrast, the breakdown field strength of 3wt% PANI-0.5wt% MWCNTs/EP was increased by 106.16%, and the nonlinear coefficient is as high as 5.32. In addition, with the increase in PANI doping amount, the nonlinear coefficient of PANI-MWCNTs/EP gradually increases, and the breakdown strength also gradually increases. It can be seen that doping PANI can improve the breakdown strength while maintaining the range of resistivity variation within the nonlinear material working field strength. This discovery can provide reference for the development of nonlinear anti-corona materials for subsequent high-voltage generators. [ABSTRACT FROM AUTHOR]

Introduction: Nasoendotracheal (NET) tubes are exposed to various external forces, handling, slippage, and accidental extubation, with the potential for fatal complications. In the modern era, several techniques have been developed to reduce the complication rate of Nasoendotracheal Intubation (NTI). NET tubes can be secured using twill or cotton tape, adhesive tape, gauze, or a manufactured device, either individually or in combination. In present study, a transcolumellar stitch and transeptal stitch were designed with 2-0 silk suture material and utilised by many anaesthetists and surgeons to secure the NET, providing good stability but sometimes leading to columellar ischaemia and cutting through. Aim: To compare the intraoperative stability of Nasoendotracheal Tubes (NETT) secured by a transept flower stitch with those secured using a simple surgical knot in patients undergoing NET Intubation (NETI) for open reduction and internal fixation of maxillofacial trauma. Materials and Methods: This cross-sectional study was conducted in the Department of Oral and Maxillofacial Surgery at Sharad Pawar Dental College and Hospital and Acharya Vinoba Bhave Rural Hospital, Sawangi (Meghe), Wardha, Maharashtra, India, over a period of six months from March 2023 to August 2023. The study involved 30 patients with maxillofacial fractures who were divided into two groups. Preoperative assessments included case history, physical examinations, and maxillofacial evaluations. Patients were divided into two groups: Group A underwent simple surgical knot using 2-0 silk suture (odd-numbered patients), while patients in Group B underwent transseptal flower stitch using 2-0 silk suture (even-numbered patients). All parameters were recorded by the same surgeon at the beginning and end of the procedure. The data was collected, tabulated, and statistically analysed using Statistical Package for the Social Sciences (SPSS) statistical software version 23.0. Results: Out of the total 30 patients enrolled in the study, 24 (80%) were male and 6 (20%) were female. The comparison between the two groups regarding the duration of surgery showed no statistically significant difference. Three parameters, namely the amount of NETT displacement, nasal tip laceration, and tip ischaemia, were evaluated and recorded both preoperatively and immediately after extubation. The amount of NETT displacement (p-value=0.031) and nasal tip laceration, haemorrhage, or necrosis (p-value=0.049) were shown to differ statistically significantly between the groups. Conclusion: The present study highlighted that the flower stitch method is an extremely beneficial approach. It offers advantages in terms of better stability and is associated with fewer complications and lower morbidity when compared to the simple surgical knot group. [ABSTRACT FROM AUTHOR]

The severity of hallux valgus (HV) deformity is associated with recurrence after corrective surgery because of the degenerative change of the medial capsule including the medial collateral ligament (MCL) at the metatarsophalangeal joint. This study aimed to assess the effectiveness of the MCL augmentation using a suture tape anchor of the recurrence of HV and to evaluate the histological changes of the medial joint capsule in HV patients. Thirty-four feet with severe hallux valgus were included and divided into 2 groups. Seventeen feet had the MCL reconstruction using suture tape anchor with a combination of the corrective osteotomy as the suture tape group (mean age, 64.0 years), and other seventeen feet had the corrective osteotomy without MCL reconstruction as the control group (mean age, 62.0 years). HV angle (HVA) and intermetatarsal angle (IMA) on the weight-bearing radiograms and the Japanese Society for Surgery of the Foot (JSSF) score in both groups were compared at the final follow-up. The medial capsule was harvested from other 20 feet with HV and the relationship between the severity of HV and the histological findings was analyzed. HVA, IMA, and JSSF scores in both groups were significantly improved from preoperatively to the final follow-up (P < 0.01). At the final follow-up, HVA in the suture tape group (9.2°) was significantly smaller than that in the control (15.4°) (P < 0.01). There were no significant differences in the IMA and the JSSF score at the final follow-up between both groups. Histological scores in HV with ≥40° HVA was significantly worse than those in <40°. The medial joint capsule in severe HV deformity showed the degenerative change and the MCL reconstruction using suture tape combined with osteotomy provides a strong medial constraint to prevent the recurrence of the deformity in severe hallux valgus. 3 [ABSTRACT FROM AUTHOR]

The loss of midbrain dopaminergic (DA) neurons is the fundamental pathological feature of Parkinson's disease (PD). PD causes chronic pain in two-thirds of patients. Recent studies showed that the activation of the pedunculopontine tegmental nucleus (PPTg) can effectively relieve inflammatory pain and neuropathic pain. The PPTg is located in the pontomesencephalic tegmentum, a target of deep brain stimulation (DBS) treatment in PD, and is involved in motor control and sensory integration. To test whether the lesion of midbrain DA neurons induced pain hypersensitivity, and whether the chemogenetic activation of the PPTg could modulate the pain, the AAV-hM3Dq receptor was transfected and expressed into the PPTg neurons of 6-hydroxydopamine-lesioned mice. In this study, von Frey, open field, and adhesive tape removal tests were used to assess animals' pain sensitivity, locomotor activity, and sensorimotor function and somatosensory perception, respectively. Here, we found that the lesion of midbrain DA neurons induced a minor deficit in voluntary movement but did not affect sensorimotor function and somatosensory perception in the tape removal test. The results showed that lesion led to pain hypersensitivity, which could be alleviated both by levodopa and by the chemogenetic activation of the PPTg. Activating the PPTg may be a potential therapeutic strategy to relieve pain phenotypes in PD. [ABSTRACT FROM AUTHOR]

This study introduced a novel two-step treatment to enhance the waterproofing, dimensional stability, and self-cleaning capabilities of ancient architectural wood. The process was initiated with the immersion of wood in an organic hybrid sol, composed of an acidic methyltrimethoxysilane (MTMS)-based silica sol and polyvinyl alcohol (PVA), which effectively sealed the wood's inherent pores and cracks to mitigate degradation effects caused by aging, fungi, and insects. Subsequently, the treated wood surface was modified with an alkaline MTMS-based silica sol to form a functional superhydrophobic protective layer. The modification effectiveness was meticulously analyzed using advanced characterization techniques, including scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). The results demonstrated substantial improvements: the modified wood's water contact angle (WCA) reached 156.0°, and the sliding angle (SA) was 6.0°. Additionally, the modified wood showed a notable reduction in water uptake and moisture absorption, enhancing its dimensional stability. The superhydrophobic surface endowed the wood with excellent self-cleaning properties and robust resistance to pollution. Enhanced mechanical durability of superhydrophobic surface was observed under rigorous testing conditions, including sandpaper abrasion and tape peeling. Furthermore, the modification improved the thermal stability, compressive strength, and storage modulus of the wood. Collectively, these enhancements render this modification a potent methodology for the preservation and functional augmentation of historic architectural woodwork. [ABSTRACT FROM AUTHOR]

Laser-assisted automated tape placement systems are currently the state of the art regarding thermoplastic tape placement. Flashlamp heating systems are rather new in this field of application and offer high energy density with low safety requirements and moderate costs compared to laser-assisted automated tape placement systems. In this study, the effect of processing parameters on interlaminar bonding of carbon fiber-reinforced polyamide 6 tapes is investigated using a flashlamp heating system. The temperature during placement is monitored using an infrared camera, and the bonding strength is characterized by a wedge peel test. The bonding quality of the tapes placed between 210 °C and 330 °C at a lay-up speed of 50 mm/s is investigated. Thermogravimetric analysis, differential scanning calorimetry, and micrographs are used to investigate the material properties and effects of the processing conditions on the thermophysical properties and geometric properties of the tape. No significant changes in the thermophysical or geometric properties were found. Moisture within the tapes and staining of the quartz guides of the flashlamp system have significant influence on the bonding strength. The highest wedge peel strength of dried tapes was found at around 330 °C. [ABSTRACT FROM AUTHOR]

Rooftop solar modules are usually held in place by racks or frames that are mechanically attached to a roof structure and/or by heavyweight, ballasted footing mounts. These mounts ensure that the panel system remains in position against wind load. However, mechanical connectors create penetrations into the water-resistant layer of the roof, whereas ballasted footing mounts cause a significant additional load on the load-bearing structure of roof. For these reasons, adhesive connection seems to be a beneficial solution. Acrylic adhesive tapes, marked as VHBTM, may provide sufficient strength, and they have no need for mechanical fasteners or ballast. Acrylic adhesive tapes also provide a comfortable, fast, and efficient bonding process with no curing compared to liquid adhesives. On the other hand, resistance to water at load-bearing joints has not been sufficiently studied yet and could be critical for connections exposed to the outdoor environment. The present study aims at the determination of water resistance and durability of the VHBTM tapes from the GPH series, which are typically used to bond a variety of substrates including many metals. The mechanical properties and failure modes are compared for the specimens before and after a 21-day immersion in water. A significant reduction in strength was observed, depending on the substrate material. The study of chemical changes in the acrylic tape and in its leachate through infrared spectroscopy (FT-IR), X-ray fluorescence, and X-ray diffraction analyses clarified the reduction in mechanical properties. The selected VHBTM tape demonstrated strong resistance to the effects of water. However, the overall strength of the joint after immersion was significantly impacted by the decrease in adhesion to a specific substrate. [ABSTRACT FROM AUTHOR]

Silicon nanowires were characterized by x-ray photoelectron spectroscopy with an Al Kα (1486.6 eV) excitation source. The sample was fixed to a stainless-steel sample holder with a copper double-sided adhesive tape. Survey spectrum and C 1s, O 1s, and Si 2p core-level spectra were acquired. [ABSTRACT FROM AUTHOR]

Molybdenum deposited on carbon graphene nanowalls was characterized by x-ray photoelectron spectroscopy with an Al Kα (1486.6 eV) excitation source. The sample was fixed to a stainless-steel sample holder with copper double-sided adhesive tape. Survey spectrum, C 1s, O 1s, Si 2p, and Mo 3d core levels spectra were acquired. [ABSTRACT FROM AUTHOR]

The article discusses the challenges and potential benefits of Mohs micrographic surgery (MMS) in India for the treatment of certain types of skin cancer. While MMS is gaining popularity as an effective treatment option, there are obstacles to its widespread adoption, including limited access to specialized centers, cost considerations for patients, and the need for continued training and education among healthcare professionals. The article suggests that as awareness increases and infrastructure improves, MMS is likely to become more widely available and accepted as a standard of care for appropriate cases of skin cancer in India. [Extracted from the article]

Introduction/Objective. Ayocote bean (Phaseolus coccineus) has potential as a source of resistance in breeding programs because it exhibits greater tolerance to plant pathogens than P. vulgaris. However, its sanitary characterization is insipient; therefore, the purpose of this work was to carry out an etiological-epidemiological diagnosis, with emphasis on presumptive symptoms of viral and phytoplasmic organisms, and a typical fungal signs of powdery mildew. Materials and Methods: A plot (50 x 62 m) of flowering Ayocote bean was selected. It was divided into 80 (8 x 10) quadrats (6 x 6 m) and 720 subquadrats (2 x 2 m). From 25 plants with powdery-mildew-type leaf symptoms, mycelium was collected with adhesive tape for light microscopy observation and taxonomic identification. Length-width measurements were made on 60 conidia. Pure mycelium collected in situ and ex situ from 1-5 leaflets/plant was used for genomic analysis by PCR with universal primers ITS1 and ITS4. Samples were sequenced in Macrogen Inc. Korea. A total of 63 plants and 121 trifoliate leaves with viral and phytoplasmic symptoms were collected by direct sampling. In 88/121 samples, genomic analysis was performed by PCR with universal primers for Potyvirus (1), Begomovirus (2), and Phytoplasmas (1). Sequence editing and analysis were performed in SeqAssem and BLASTn/GenBank. Phylogenetic constructions were developed in Mega 11 with MUSCLE, Maximum Likelihood (ML), and HKY substitution model (1000-Bootstrap). Putative powdery mildew severity (%), flower damage (%), Macrodactylus sp. adult density, and plant vigor (%) were evaluated in 80 quadrats (3subquadrats/quadrat) with App-Monitor®v1.1 configured with a 5-class scale. In GoldenSurfer® v10, Kriging geostatistical analysis was performed to determine the spatial interrelationship between these variables. Results: Erysiphe vignae was identified as associated with powdery mildew of P. coccineus. The fungus, with hyaline, ovoid to ellipsoid conidia measuring 31.74 ± 0.3419 µm x 15.11 ± 0.1579 µm, without the presence of fibrosin bodies, had 100% genomic homology. This is the first report in Mexico. With average July-August temperature and relative humidity of 16.3 °C (±5.8) and 92.8 % (±10.7), respectively, powdery mildew leaf incidence and severity were 65.3 and 22.7 % (±16.9, range: 0 - 66.5 %), respectively. The most inductive focus (60-80 % severity) had an aggregate e 4-quadrat pattern (96 m2, lag = 4 and s2-s = 450). Inoculum dispersal was significantly associated with dominant North-South winds and plant vigor (lag = 4 and s2-s = 470). Flower damage was inconclusive in its spatial association with powdery mildew and Macrodactylus sp. suggesting uncorrelated events. No Potyvirus, Begomovirus, or Phytoplasmas were detected associated with yellowing, leaf distortion, mosaic, internode shortening, and other symptoms observed in situ. This confirms the relative tolerance/resistance reported for P. coccineus. Conclusion: E. vignae (Erysiphales: Erysiphaceae) associated with P. coccineus is reported for the first time in Mexico with moderate to intense epidemic level, which indicates its susceptible condition to this fungus. However, negative results for Potyvirus, Begomovirus, and Phytoplasmas, validate the apparent tolerance/resistance of P. coccineus to these organisms. [ABSTRACT FROM AUTHOR]

A wearable sweat sensor chip based on surface-enhanced Raman spectroscopy (SERS) is here presented. The plasmonic core of the chip, obtained by deposition of silver nanowires on a polytetrafluoroethylene (PTFE) porous membrane, permits the direct and label-free detection of urea and lactate at physiologic concentrations in combination with the pH measurement in the range between 5 and 9. Once integrated with commercial biocompatible and adhesive tape layers, the as produced SERS-active chip provides a low-cost, flexible and wearable sensing device for rapid and reliable human sweat analysis. The chip was finally tested on real sweat samples to estimate lactate and urea during medium-intense exertions. [ABSTRACT FROM AUTHOR]

Background. Kyphosis is a prevalent condition in older women that can significantly impact their mobility. Various therapeutic approaches and modalities can be used to treat hyperkyphosis. Cervicothoracic fascia stretching reduces kyphotic angle, decreases cervical pain, and improves various dimensions of thoracic mobility. Purpose of the study. The aim of this study is to evaluate the effect of the cervicothoracic fascia stretch on the thoracic mobility of older women. Subjects and methods. Sixty older women with non-specific neck discomfort, whose ages ranged from 60 to 70, were recruited from the outpatient clinics at Heliopolis University. The recruited patients were randomly divided into two groups of equal numbers of subjects: Group A included 30 patients who underwent cervicothoracic fascia stretching, and 30 patients were included in Group B who underwent diaphragmatic breathing exercises three times a week for four weeks. The neck pain was assessed utilizing the Neck Pain and Disability Scale (NPAD), while thoracic kyphosis was assessed utilizing a flexion curve ruler. Moreover, thoracic circumference excursion was measured using tape, while transverse and latero-lateral dimensions of the thorax were assessed using a chest depth caliper. Results. The comparison between pre- and post-study results showed a significant enhancement in all measured variables, including neck pain, thoracic circumference, chest width dimension, chest depth dimension, and kyphotic angle in both groups. Our findings indicated a statistically significant decrease in neck pain and kyphotic angle. Conversely, there was a statistically significant increase in thoracic circumference and chest width dimension for the cervicothoracic stretch group after treatment. Conclusions. Both interventions, such as intrathoracic fascia stretch and diaphragmatic breathing exercises exhibited extraordinary effectiveness in the management of reduced thoracic mobility and neck pain in older women with better results in favor of cervicothoracic stretch. [ABSTRACT FROM AUTHOR]

In community-based studies, mid-upper arm circumference (MUAC) appears to be a superior predictor of childhood under nutrition than many other anthropometric indicators. This study aimed to evaluate the nutritional status of children aged 2-5 years using mid-upper arm circumference (MUAC) cut-off values recommended by the World Health Organization in 2007. The present study was a cross-sectional study carried out in randomly selected 44 ICDS canters in Maynaguri Block, Jalpaiguri District, West Bengal, India. Children aged 24 – 60 months (Boys - 499 and Girls - 522) from three (Rajbanshi, Nama Shudra, Nashya Seikh) ethnic communities. Significant age variation was found among boys (F = 14.777; p< 0.001) and girls (9.465; p< 0.001). The overall percentage of moderate and severe undernourished girls (moderate – 25.67%; severe – 5.75%) is higher than the boys (moderate – 24.85 %; severe – 5.41%). Chi-square analysis shows a statistically significant relationship of under nutrition with age, birth weight, ethnicity, birth order, number of siblings, bath place, fuel of cooking, income level and Asiaspecific maternal BMI level. Comparison with international studies reveals that the prevalence of under nutrition in the present study is higher than the children of Malaysia, Cameroon, Nepal, Nigeria and Pakistan. In the context of India, the present study reported a higher prevalence of under nutrition than the children of Midnapur South 24 Pargana of West Bengal, children of Odisha and Bihar. [ABSTRACT FROM AUTHOR]

The supine position in unconscious patients resulted in the tongue falling back because of the loss of muscle tension which obstructed the upper airway. The head reclination opened the airway, however unexperienced rescuers faced difficulties in performing bagvalve-mask ventilation as it was hard to detect the optimal head position for opening the airway. The bag-valve-mask ventilation could be optimized if it indicated an optimized head angle to the rescuer. A digital sensor was attached to the face mask for measuring the degree of head reclination. Moreover, the face mask was equipped with an airway trainer and sealed via adhesive tape. The airway trainer was connected to a test lung and ventilated through pressure-controlled standard anesthesia machine (Pmax = 10 mbar, Positive End Expiratory Pressure (PEEP) = 0 mbar, f = 12/min). The head of airway manikin was tilted to 42 degrees starting from neutral position with a gradient of 2 degrees. The primary endpoint was the correlation of preset angles and digitally measured head position angles via the mask. In addition, the tidal and minute volumes were evaluated based on the head reclination. The preset and the digitally measured head position angles depicted correlation (R2 = 0.9895855684; p < 0.001). The tidal volume was 150 mL in head position angle of <10 degrees, 200 mL at 18 degrees, 450 mL at 25 degrees, and it levelled with about 500 mL at 30 degrees. In conclusion, digital head position angle was measured to detect the correct head position. A signal in the face mask could indicate the optimized head position to the first respondents or inexperienced rescuers in emergency ventilation. [ABSTRACT FROM AUTHOR]

Background Low back pain (LBP) is a leading cause of disability. Recurrent low back pain (rLBP) is defined as two or more episodes of LBP in a 12-month period, each lasting more than 24 hours and separated by at least one pain-free month. Many studies have shown that hip and trunk variables have an influence on LBP. However, most of these are studies of participants with acute or chronic LBP rather than rLBP. Purpose To examine the difference between hip and trunk variables of university students with and without rLBP. Study Design Cross-Sectional Methods Participants with and without rLBP between 18 and 35 years of age not currently undergoing clinical orthopedic care were recruited for this cross-sectional study. Bilateral hip range of motion (ROM) and trunk ROM were measured with a goniometer or measuring tape (hip motions in all planes along with trunk flexion, extension, and lateral flexion). Strength of the hip extensors, abductors, and external rotators was measured using a handheld dynamometer, and a single-leg bridge endurance test was performed to assess differences and correlations between outcomes. Results Twenty-six subjects aged 18 to 35 years with rLBP (n=10) and without rLBP (n=16) participated. Statistically significant differences between the two groups were found for right and left hip flexion (p = 0.029 and 0.039, respectively), right hip adduction (p = 0.043), and right hip extension (p = 0.021). No significant differences were found between groups for strength, endurance, or other ROM measures. Conclusion The findings of this study show statistically significant although clinically non-meaningful differences in hip flexion, extension, and adduction ROM in the rLBP group compared to the control group. This lack of clinically meaningful difference may be relevant to testing procedures and treatment of patients or athletes with rLBP. This study also suggests that hip strength and endurance may not play a major role in the development or treatment of rLBP. Level of Evidence: 3 [ABSTRACT FROM AUTHOR]

This work aimed to compare the quality and properties of the welded joints of AMg6 aluminium alloy produced via conventional TIG welding with the properties of those produced with flux backing tape. This study focussed on the relative length of oxide inclusions (Δoi) and the amount of the excess root penetration (hroot) of the AMg6 alloy weld beads. The results show the influence of the thickness of the flux layer of the backing tape on the formation and quality on the AMg6 alloy welds, along with the effect of flux backing tape and edge preparation on the mechanical properties of the 6 and 8 mm thick welded plates. In accordance with the results obtained, the joints produced by means of TIG welding with flux back backing tape and without edge preparation have higher mechanical properties. Moreover, the TIG welding of AMg6 alloy using flux backing tape reduces the total welding time by 55%, reduces filler wire consumption by 35%, reduces shielding gas consumption by 43% and electricity consumption by 60% per 1 linear meter of the weld line. [ABSTRACT FROM AUTHOR]

The mechanical performance of timber composite floors is influenced by the degree of composite action between the components. In this study, the shear strength performance of cross-laminated timber and glued laminated timber composite floors based on the joining method was evaluated by push-out test. Eight types of timber-timber composite joints were evaluated using three different methods: lag screw joints, glued-in rod joints using fully threaded bolts and glass fiber reinforced plastic, and hybrid joints. Strength characteristics were derived to make theoretical predictions on the load-carrying capacity of the joints. The results showed that the glued-in rod joints were superior to the lag screw joints, with slip coefficients and ductility measured as 10 times and 2.5 times higher, respectively. The reliability of the strength characteristics of the glued-in rod joints was remarkably different depending on the presence or absence of anti-adhesive tape applied to the timber-to-timber joint surface. The load capacity of the hybrid joint, which combines mechanical and glued-in rod joining methods, was 47% higher than that of the lag screw joint and 38% higher than that of the glued-in bolt joint. In the European Yield Model modified to estimate the load capacity of joints, the rope effect and the yield moment of the fasteners had a remarkable impact on the predicted load capacity. [ABSTRACT FROM AUTHOR]