Search

Purpose: Excessive paper dust during paper production may harm the workers' respiratory health. We wanted to assess the inhalable paper dust levels and its determinants among paper industry workers., Methods: A study was conducted in Ethiopia to assess the level of personal inhalable paper dust exposure among four paper mills. A total of 150 samples were collected using the IOM sampler attached to Side Kick Casella pumps at a flow rate of 2 L/min. The samples were analyzed in Nemko Norlab, Norway. Linear mixed-effect models were applied to identify determinants of inhalable paper dust., Results: The geometric mean of personal inhalable paper dust was 3.3 mg/m 3 with 80% of the measurements exceeding the Swedish occupational exposure limit (OEL) of 2 mg/m 3 . The linear mixed-effects model showed that the level of dust was 28% higher when using high-speed than when using low-speed rewinding machines, while paper mills with an average of more than four machines per job group had 22% higher exposure than paper mills with a lower number of machines. Furthermore, working in packing and preparation was associated with higher dust exposure than in other areas., Conclusions: The dust exposure levels were above the Swedish OEL for 80% of the samples. This indicates that preventive measures should be established in the industry. The exposure model identified high-speed rewinding machines, a high number of machines, and work in preparation and packing as associated with high levels of paper dust exposure., Competing Interests: Declarations Ethical approval Ethical clearance was obtained from the Institutional Review Board of the College of Health Science Addis Ababa University number 079/22/SPH and from the Regional Committee for Research Ethics South East Norway, number 2022/521268. After the purpose and the importance of their participation were explained informed consent was taken from each study participant. Privacy and confidentiality of information given by each participant were kept properly and personal identifiers were removed. Conflict of interest The authors declare that they have no competing interests., (© 2024. The Author(s).)

A new, sensitive, and cost-effective lab-on-paper-based immunosensor was designed based on electrochemical impedance spectroscopy (EIS) for the detection of exosomes. EIS was selected as the determination method since there was a surface blockage in electron transfer by binding the exosomes to the transducer. Briefly, the carbon working electrode (WE) on the paper electrode (PE) was modified with gold particles (AuPs@PE) and then conjugated with anti-CD9 (Anti-CD9/AuPs@PE) for the detection of exosomes. Variables involved in the biosensor design were optimized with the univariate mode. The developed method presents the limit of detection of  8.7 × 10 2 exosomes mL -1 , which is lower than that of many other available methods under the best conditions. The biosensor was also tested with urine samples from cancer patients with high recoveries. Due to this  a unique, low-cost, biodegradable technology is presented that can directly measure exosomes without labeling them for early cancer or metastasis detection., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

In this study, two methods were examined to optimize the immobilization of antibodies on paper when conducting a paper-based enzyme-linked immunosorbent assay (P-ELISA). Human IgG, as a test-capture protein, was immobilized on paper via the formation of Schiff bases. Aldehyde groups were introduced onto the surface of the paper via two methods: NaIO 4 and 3-aminopropyltriethoxysilane (APTS) with glutaraldehyde (APTS-glutaraldehyde). In the assay, horseradish peroxidase-conjugated anti-human IgG (HRP-anti-IgG) binds to the immobilized human IgG, and the colorimetric reaction of 3,3',5,5'-tetramethylbenzyzine (TMB) produces a blue color in the presence of H 2 O 2 and HRP-anti-IgG as a model analyte. The immobilization of human IgG, the enzymatic reaction conditions, and the reduction of the chemical bond between the paper surface and immobilized human IgG all were optimized in order to improve both the analytical performance and the stability. In addition, the thickness of the paper was examined to stabilize the analytical signal. Consequently, the APTS-glutaraldehyde method was superior to the NaIO 4 method in terms of sensitivity and reproducibility. Conversely, the reduction of imine to amine with NaBH 4 proved to exert only minimal influence on sensitivity and stability, although it tended to degrade reproducibility. We also found that thick paper was preferential when using P-ELISA because a rigid paper substrate prevents distortion of the paper surface that is often caused by repeated washing processes., (© 2024. The Author(s).)

A paper-based colorimetric sensor array mediated by a novel nanozyme (CuCo 2 O 4 ) was developed using a screen-printing technology. The aim was to facilitate the identification of different kinds of alkaloids. Typically, three chromogenic substrates (3,3',5,5'-tetramethylbenzidine, 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid), and o-phenylenediamine) were selected as sensing elements, which can be catalyzed by a CuCo 2 O 4 nanozyme with peroxidase-like activity to yield corresponding oxidized products, thereby inducing color changes. Owing to the varying inhibitory ability of different alkaloids on acetylcholinesterase (AChE), a decrease in choline (Ch) concentration occurs and subsequently results in the restoration of color within the units of sensor array. Color data can be transformed into hue information with a smartphone. The above color variations generated a unique "fingerprint" pattern on five alkaloids (berberine, palmatine, jatrorrhizine, eserine, and harmane), which can be successfully discriminated through linear discriminant analysis in the range 0.2 to 20 µM. Furthermore, the sensor arrays allowed successful discrimination of the above five alkaloids in Chinese herbal medicine samples and recognition of 22 blind samples. This work presents a novel nanozyme-based paper sensor array, which is a user-friendly and reliable platform for probing different alkaloids. In addition, the developed sensing strategy enables the identification of AChE-related diseases, positively contributing to the screening available of AD-associated drugs., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

A wearable potentiometric device is reported based on an innovative butterfly-like paper-based microfluidic system, allowing for continuous monitoring of pH and Na + levels in sweat during physical activity. Specifically, the use of the butterfly-like configuration avoids evaporation phenomena and memory effects, enabling precise and timely biomarker determination in sweat. Two ad hoc modified screen-printed electrodes were embedded in the butterfly-like paper-based microfluidics, and the sensing device was further integrated with a portable and miniaturized potentiostat, leveraging Bluetooth technology for efficient data transmission. First, the paper-based microfluidic configuration was tested for optimal fluidic management to obtain optimized performance of the device. Subsequently, the two electrodes were individually tested to detect the two biomarkers, namely pH and Na + . The results demonstrated highly promising near-Nernstian (0.056 ± 0.002 V/dec) and super-Nernstian (- 0.080 ± 0.003 V/pH) responses, for Na + and pH detection, respectively. Additionally, several important parameters such as storage stability, interferents, and memory effect by hysteresis study were also investigated. Finally, the butterfly-like paper-based microfluidic wearable device was tested for Na + and pH monitoring during the physical activity of three volunteers engaged in different exercises, obtaining a good correlation between Na + increase and dehydration phenomena. Furthermore, one volunteer was tested through a cardiopulmonary test, demonstrating a correlation between sodium Na + increase and the energetic effort by the volunteer. Our wearable device highlights the high potential to enable early evaluation of dehydration and open up new opportunities in sports activity monitoring., (© 2024. The Author(s).)

In the era of liquid biopsy, microRNAs emerge as promising candidates for the early diagnosis and prognosis of cancer, offering valuable insights into the disease's development. Among all the existing analytical approaches, even if traditional approaches such as the nucleic acid amplification ones have the advantages to be highly sensitive, they cannot be used at the point-of-care, while sensors might be poorly sensitive despite their portability. In order to improve the analytical performance of existing electroanalytical systems, we demonstrate how a simple chromatographic paper-based disk might be useful to rationally improve the sensitivity, depending on the number of preconcentration cycles. A paper-based electrochemical platform for miRNA detection has been developed by modifying a paper-based electrode with a methylene blue (MB)-modified single-stranded sequence (ssDNA) complementary to the chosen miRNA, namely miR-224 that is associated with lung cancer. A detection limit of ca. 0.6 nM has been obtained in spiked human serum samples. To further enhance the sensitivity, an external chromatographic wax-patterned paper-based disk has been adopted to preconcentrate the sample, and this has been demonstrated both in standard and in serum solutions. For each solution, three miR-224 levels have been preconcentrated, obtaining a satisfactory lowering detection limit of ca. 50 pM using a simple and sustainable procedure. This approach opens wide possibilities in the field of analytical and bioanalytical chemistry, being useful not only for electrochemistry but also for other architectures of detection and transduction., (© 2024. The Author(s).)

Wax printing is the most widely used method for fabricating microfluidic paper-based analytical devices (μPADs), but it still suffers from disadvantages like discontinuation of wax printers and need for additional equipment for heating treatment. To address these issues, this work initially describes a new class of wax printing approach for high-precision, batch fabrication of μPADs using a household 3D printer. It only involves a one patterning step of printing polyethylene wax into rice paper body. Under optimized parameters, a fabrication resolution, namely the minimum hydrophilic channel width, down to ~189 ± 30 μm could be achieved. In addition, the analytical applicability of such polyethylene wax-patterned μPADs was demonstrated well with enhanced colorimetric detection of dopamine as a model analyte by combining metal-organic framework (MOF) based nanoenzymes (ZIF-67) with a smartphone (for portable quantitative readout). The developed nanosensor could linearly detect dopamine over a concentration range from 10 to 1000 μM, with a detection limit of ca. 2.75 μM (3σ). The recovery results for analyzing several real samples (i.e., pig feed, chicken feed, pork and human serum) were between 91.82 and 102.79%, further validating its good detection accuracy for potential practical applications in food safety and medical diagnosis., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

As the role of exosomes in physiological and pathological processes has been properly perceived, harvesting them and their internal components is critical for subsequent applications. This study is a debut of intermittent lysis, which has been integrated into a simple and easy-to-operate procedure on a single paper-based device to extract exosomal nucleic acid biomarkers for downstream analysis. Exosomes from biological samples were captured by anti-CD63-modified papers before being intermittently lysed by high-temperature, short-time treatment with double-distilled water to release their internal components. Exosomal nucleic acids were finally adsorbed by sol-gel silica for downstream analysis. Empirical trials not only revealed that sporadically dropping 95 °C ddH 2 O onto the anti-CD63-modified papers every 5 min for 6 times optimized the exosomal nucleic acids extracted by the anti-CD63 paper but also verified that the whole deployed procedure is applicable for point-of-care testing (POCT) in low-resource areas and for both in vitro (culture media) and in vivo (plasma and chronic lesion) samples. Importantly, downstream analysis of exosomal miR-21 extracted by the paper-based procedure integrated with this novel technique discovered that the content of exosomal miR-21 in chronic lesions related to their stages and the levels of exosomal carcinoembryonic antigen originated from colorectal cancer cells correlated to their exosomal miR-21., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

A one-shot CO 2 laser-based strategy to generate conductive reduced graphene oxide (rGO) decorated with nanoceria (nCe) is proposed. The 2D/0D rGO-nCe films, integrated as catalytic sensing layers in paper-based sensors, were employed for on-site monitoring of indoor fogging treatments against Listeria monocytogenes (Lm), a ubiquitous pathogenic bacterium. The rGO-nCe laser-assisted synthesis was optimized to preserve the rGO film morphological and electron-transfer features and simultaneously integrate catalytic nCe. The films were characterized by microscopical (SEM), spectroscopical (EDX, Raman, and FTIR), and electrochemical techniques. The most performing film was integrated into a nitrocellulose substrate, and the complete sensor was assembled via a combination of xurography and stencil printing. The rGO-nCe sensor's catalytic activity was proved toward the detection of H 2 O 2 , obtaining sensitive determination (LOD = 0.3 µM) and an extended linear range (0.5-1500 µM). Eventually, the rGO-nCe sensor was challenged for the real-time continuous monitoring of hydrogen peroxide aerosol during no-touch fogging treatment conducted following the EU's recommendation for biocidal product use. Treatment effectiveness was proved toward three Lm strains characterized by different origins, i.e., type strain ATCC 7644, clinical strain 338, and food strain 641/6II. The sensor allows for discrimination and quantification treatments at different environmental biocidal amounts and fogging times, and correlates with the microbiological inhibition, promoting the proposed sensor as a useful tool to modulate and monitor no-touch treatments., (© 2024. The Author(s).)

The rapid discrimination of bacteria is currently an emerging trend in the fields of food safety, medical detection, and environmental observation. Traditional methods often require lengthy culturing processes, specialized analytical equipment, and bacterial recognition receptors. In response to this need, we have developed a paper-based fluorescence sensor array platform for identifying different bacteria. The sensor array is based on three unique carbon quantum dots (CQDs) as sensing units, each modified with a different antibiotic (polymyxin B, ampicillin, and gentamicin). These antibiotic-modified CQDs can aggregate on the bacterial surface, triggering aggregation-induced fluorescence quenching. The sensor array exhibits varying fluorescent responses to different bacterial species. To achieve low-cost and portable detection, CQDs were formulated into fluorescent ink and used with an inkjet printer to manufacture paper-based sensor arrays. A smartphone was used to collect the responses generated by the bacteria and platform. Diverse machine learning algorithms were utilized to discriminate bacterial types. Our findings showcase the platform's remarkable capability to differentiate among five bacterial strains, within a detection range spanning from 1.0 × 10 3  CFU/mL to 1.0 × 10 7  CFU/mL. Its practicality is further validated through the accurate identification of blind bacterial samples. With its cost-effectiveness, ease of fabrication, and high degree of integration, this platform holds significant promise for on-site detection of diverse bacteria., (© 2024. The Author(s).)

In this study, the potential of ultrafiltered xylano-pectinolytic enzymatic bleaching approach was investigated, for manufacturing wheat straw-based paper. The enzymatic step was found to be most effective, with xylanase-pectinase dose of 4-1.7 IU/g pulp and time period of 180 min. The absorption spectra of the pulp free filtrate samples obtained after treatment of the pulp with ultrafiltered enzymes showed the removal of more impurities, in comparison to the treatment with crude enzymes. Microscopic analysis also showed the removal of lignin impurities in enzymatically bleached pulp samples. This bleaching approach using enzymes resulted in 27% reduction in ClO 2 dose. Ultrafiltered enzymes treated pulp samples also showed improved quality-related parameters, and Gurley porosity, burst index, breaking length, double fold, tear index, and viscosity increased by 19.05, 13.70, 8.18, 29.27, 4.41, and 13.27%, respectively. The lignin content, TDS, TSS, BOD and COD values also decreased in the effluent samples obtained after enzymatic bleaching plus 73% chemical bleaching dose. The BOD and COD values of the effluent samples improved by 23.01 and 23.66%, respectively. Thus, indicating the potential of ultrafiltered xylano-pectinolytic enzymes in reducing pollution during bleaching of wheat straw. This is the first study, mentioning the efficacy of ultrafiltered enzymes in the bleaching of wheat straw-based paper with better optical-strength-related properties and effluent characteristics., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

White detection remains a critical limitation in using colorimetry to determine substances with microfluidic paper-based analytical devices (µPADs). Here, we introduced a simple, safe alcohol ink-modified µPAD for the straightforward and facile detection of white color in precipitation reactions. Although absolute alcohol ink was found to cause device leakage, dilution of the ink with water was the key to successfully precoat wax-created µPADs. Device utility was demonstrated through simultaneous detection of sulfate, phosphate, and water hardness via precipitation reactions. While phosphate interfered with sulfate detection by Ba 2+ , in situ distance-based quantification of phosphate was implemented. Aside from anions, the modified µPADs could be extended to detect cationic analytes such as total hardness. The limits of detection (LODs) for sulfate, phosphate, and hardness were 0.005 mmol L -1 , 0.005 mmol L -1 , and 0.5 mmol L -1 , respectively, with the linear ranges of 0.01-10.0 mmol L -1 , 0.005-1.0 mmol L -1 , and 0.001-0.5 mol L -1 . The µPADs were applied to real water samples, demonstrating results that were consistent with standard methods at a 95% confidence level. By incorporating white detection, these alcohol ink-modified µPADs offer enhanced versatility for addressing a broader array of analytical challenges in real-world settings., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

The use of natural materials as precursors for synthesizing sorptive phases can reduce the environmental impact of the sample preparation step. In this article, two natural materials, i.e., cellulose and humic acids, are combined, resulting in a porous and flat sorptive phase that combines hydrophobic and cation exchange interactions. The simple preparation, with low reagent consumption, and the high production capacity make this process affordable. The performance of the humic acid-coated paper has been studied towards three basic drugs (cocaine, codeine, and methadone), and it has allowed the determination of the targets in saliva by direct infusion tandem mass spectrometry. The simultaneous extraction of many samples and the rapid analysis (2 min) provide a high sample throughput. The resulting method has been validated following the International Conference on Harmonization (ICH) M10 validation guide. Working at the optimum conditions, the linear range was established from 5 to 500 μg·L -1 and the detection limits were established at 1.5 μg·L -1 for all the analytes. At the LOQ, the inter-day precision and intra-day precision, expressed as relative standard deviation, were better than 13.6% and 17.9%, respectively. For low/mid/high quality controls, the inter-day precision and intra-day precision were better than 11.8% and 9.1%, respectively. The accuracy, calculated as relative recovery, was in the range of 83.8-106.1%. Several samples from patients under treatment with codeine-containing prescriptions were finally analyzed., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

Electrophoretic microfluidic paper-based analytical devices (e-µPADs) are promising for low-cost and portable technologies, but quantitative detection remains challenging. In this study, we develop a paper-based isotachophoretic preconcentration and separation method for the herbicide glyphosate as a model analyte. The device, consisting of two electrode chambers filled with leading and terminating electrolytes and a nitrocellulose strip as the separation carrier, was illuminated by a flat light source and operated with a voltage supply of 400 V. Detection was accomplished using a simple camera. Colorimetric detection was optimized through competitive complexation between glyphosate, copper ions, and pyrocatechol violet as a dye. The buffer system was optimized using simulations, (i) ensuring the pH was optimal for the demetallation of the blue pyrocatechol violet-copper complex [PV] to the yellow free dye and (ii) ensuring the electrophoretic migration of glyphosate into the slower [PV] for the colorimetric reaction. A new data evaluation method is presented, analyzing the RGB channel intensities. The linear range was between 0.8 and 25 µM, with a LOD of approximately 0.8 µM. The ITP separation preconcentrated glyphosate by a factor of 820 in numerical simulations. The method may be applied to control glyphosate formulations, especially in developing countries where herbicide sales and applications are poorly regulated., (© 2024. The Author(s).)

A flexible, ultrasensitive, and practical SERS chip is presented based on a paper/f-TiO 2 /Ag structure. The chip enhances the self-assembly of Ag nanoparticles on a cellulose fiber matrix, facilitated by smart functionalized TiO 2 nanomaterials (f-TiO 2 ). This design enables superior detection of the hazardous pesticide tricyclazole (TCZ) on crops using an advanced, simple, and efficient analytical method. Despite its straightforward fabrication process via a solvent immersion method, the intrinsic smart surface properties of the TiO 2 bridging material - both hydrophilic and hydrophobic - enable the uniform and dense self-assembly of hydrophilic Ag nanoparticles (NPs) on the cellulose fiber paper substrate. This innovative design provides superior sensing efficiency for TCZ molecules with a detection limit reaching 2.1 × 10 -9  M, a remarkable improvement compared to Paper/Ag substrates lacking f-TiO 2 nanomaterials, which register at 10 -5  M. This flexible SERS substrate also exhibits very high reliability as indicated by its excellent reproducibility and repeatability with relative standard deviations (RSD) of only 5.93% and 4.73%, respectively. Characterized by flexibility and a water-attractive yet non-soluble surface, the flexible Paper/f-TiO 2 /Ag chips offer the convenience of direct immersion into the analytical sample, facilitating seamless target molecule collection while circumventing interference signals. Termed the "dip and dry" technique, its advantages in field analysis are indisputable, boasting in situ deployment, simplicity, and high efficiency, while minimizing interference signals to negligible levels. Through the application of this advanced technique, we have successfully detected TCZ in two high-value crops, ST25 rice and dragon fruit, achieving excellent recovery values ranging from 90 to 128%. This underscores its immense potential in ensuring food quality and safety. As a proof of concept, flexible Paper/f-TiO 2 /Ag SERS chips, with a simple fabrication process, advanced analytical technique, and superior sensing efficiency, bring SERS one step closer to field applications beyond the laboratory., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Heavy metal ions, such as thallium(I) and lead(II) are environmental toxicants known to cause a severe threat to human and ecosystem health. This work investigates aptamers and intercalating chromophore-based complexes for the detection of these toxic species. In one method, a selective label-free "turn-on" biosensor was developed using a G-quadruplex-intercalating agent, berberine. Fluorescence, melting temperature (T m ), and circular dichroism analysis confirmed the affinity and selectivity results, illustrating the potential of these aptasensor methods for improving detection limits. These fluorescence assays were found to perform with a detection limit of 3.4 μM for Tl(I) and 0.84 nM for Pb(II). Furthermore, the assays were challenged successfully with Tl(I) and Pb(II) spiked into river water samples. We next developed paper-based fluorescent assays for Tl(I) and Pb(II), where the aptamer/berberine complex was spotted onto the paper test zone. When Tl(I) or Pb(II) ions solutions were spotted onto the top of the test zone and the spot was illuminated with a portable UV light (365 nm), a strong green fluorescence could be easily visualized with the naked eye. The lowest detection limits achieved with these fluorescent paper-based assays for Tl(I) and Pb(II) were 1.1 nM and 1.6 nM, respectively. The two fluorescent approaches presented here have the potential to be the basis of rapid, fast, and cost-efficient screening assays for these toxic species., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

Broussonetia papyrifera is widely found in cadmium (Cd) contaminated areas, with an inherent enhanced flavonoids metabolism and inhibited lignin biosynthesis, colonized by lots of symbiotic fungi, such as arbuscular mycorrhizal fungi (AMF). However, the physiological and molecular mechanisms by which Rhizophagus irregularis, an AM fungus, regulates flavonoids and lignin in B. papyrifera under Cd stress remain unclear. Here, a pot experiment of B. papyrifera inoculated and non-inoculated with R. irregularis under Cd stress was carried out. We determined flavonoids and lignin concentrations in B. papyrifera roots by LC-MS and GC-MS, respectively, and measured the transcriptional levels of flavonoids- or lignin-related genes in B. papyrifera roots, aiming to ascertain the key components of flavonoids or lignin, and key genes regulated by R. irregularis in response to Cd stress. Without R. irregularis, the concentrations of eriodictyol, quercetin and myricetin were significantly increased under Cd stress. The concentrations of eriodictyol and genistein were significantly increased by R. irregularis, while the concentration of rutin was significantly decreased. Total lignin and lignin monomer had no alteration under Cd stress or with R. irregularis inoculation. As for flavonoids- or lignin-related genes, 26 genes were co-regulated by Cd stress and R. irregularis. Among these genes, BpC4H2, BpCHS8 and BpCHI5 were strongly positively associated with eriodictyol, indicating that these three genes participate in eriodictyol biosynthesis and were involved in R. irregularis assisting B. papyrifera to cope with Cd stress. This lays a foundation for further research revealing molecular mechanisms by which R. irregularis regulates flavonoids synthesis to enhance tolerance of B. papyrifera to Cd stress., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Novel miniaturized Pb(II) paper-based potentiometric sensors are described using coumarin derivatives I and II as electroactive ionophores and nano vanadium pentoxide as a solid contact material for the sensitive and selective monitoring of trace lead ions. Density functional theory (DFT) confirms optimum geometries, electronic properties, and charge transfer behaviors of 1:2 Pb(II): coumarin complexes. The sensors are prepared by using two strips of 20 × 5 mm filter paper with two circular orifices. One orifice is coated with vanadium pentoxide (V 2 O 5 ) nanoparticles in colloidal conductive carbon as a solid-contact, covered by a PVC membrane containing coumarin ionophore to act as a sensing probe. The other orifice is treated with Ag/AgCl in a polyvinyl butyral (PVB) film, to act as a reference electrode. Sensors with ionophores (I) and (II) exhibit Nernstian slopes of 27.7 ± 0.2 and 30.2 ± 0.2 mV/decade over the linear concentration range 4.5 × 10 -7 to 6.2 × 10 -3 M and 8.5 × 10 -8 to 6.2 × 10 -3 M, with detection limits of 1.3 × 10 -7 M (26.9 ppb) and 2.1 × 10 -8 M (4.4 ppb), respectively. The sensors are satisfactorily used for accurate determination of lead ions in drinking water, lead-acid battery wastewater, and electronic waste leachates. The results compare favourably well with data obtained by flameless atomic absorption spectrometry., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

The global advocacy of resource conservation and waste management emphasizes the significance of sustainable practices, particularly in sectors such as paper manufacturing and recycling. Currently, conventional chemical methods are predominant for paper production, necessitating the use of substantial amount of toxic chemicals. This chemical-intensive approach compromises the recycled fiber quality, generates hazardous effluent causing serious ecological threats which triggers regulatory complexities for the mills. To address these challenges modern research suggests adopting sustainable eco-friendly practices such as employing enzymes. This review aims to explore the applicability of 'laccase' enzyme for paper recycling, investigating its properties and contribution to improved recycling practices. By delving into the potential application of laccase integration into the papermaking process, this article sheds light on the limitations inherent in traditional methods surmounted within both research and translational landscapes. Culture and process optimization studies, supporting the technological improvements and the future prospects have been documented., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The development of distance-based paper analytical devices (dPADs) integrated with molecularly imprinted polymers (MIPs) to monitor Escherichia coli (E. coli) levels in food samples is presented. The fluidic workflow on the device is controlled using a designed hydrophilic bridge valve. Dopamine serves as a monomer for the formation of the E. coli-selective MIP layer on the dPADs. The detection principle relies on the inhibition of the E. coli toward copper (II) (Cu 2+ )-triggered oxidation of o-phenylenediamine (OPD) on the paper substrate. Quantitative detection is simply determined through visual observation of the residual yellow color of the OPD in the detection zone, which is proportional to E. coli concentration. The sensing exhibits a linear range from 25.0 to 1200.0 CFU mL -1 (R 2  = 0.9992) and a detection limit (LOD) of 25.0 CFU mL -1 for E. coli detection. Additionally, the technique is highly selective with no interference even from the molecules that have shown to react with OPD to form oxidized OPD. The developed device demonstrates accuracy and precision for E. coli quantification in food samples with recovery percentages between 98.3 and 104.7% and the highest relative standard deviation (RSD) of 4.55%. T-test validation shows no significant difference in E. coli concentration measured between our method and a commercial assay. The proposed dPAD sensor has the potential for selective and affordable E. coli determination  in food samples without requiring sample preparation. Furthermore, this strategy can be extended to monitor other molecules for which MIP can be developed and integrated into paper-microfluidic platform., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Uric acid (UA) is an important biomarker, as a high concentration in blood can lead to gout and further renal syndrome. Although several point-of-care testing (POCT) devices have been reported to detect UA, there are some limitations such as the requirement for uricase and the complicated pretreatment of serum/plasma samples, which restricts their use at home or in undeveloped areas. In this work, we developed an approach by applying Zn 2+ to precipitate proteins and cells in whole blood to avoid interference with the chromogenic reaction. We used carboxymethylcellulose (CMC) to immobilize tetramethylbenzidine (TMB) on a nitrocellulose membrane for colorimetric detection. Using the oxidization properties of H 2 O 2 , which turns TMB into oxidized tetramethylbenzidine (TMBox) in the presence of catalyst gold nanoparticles (AuNPs), we successfully constructed an enzyme-free paper-based POCT device using the reduction reaction of UA and TMBox for simple, speedy, and cheap colorimetric detection of UA, achieving a detection time of 8 min, a linear range of 0-150 μg/mL, and an LOD of 25.79 μg/mL. The UA concentration in whole blood samples was further measured and correlated well with the clinical value (R 2  = 0.8212). Thus, the proposed assay has the potential for POCT diagnosis, monitoring, and prognosis of diseases related to UA., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

Overwintering insects are facing energetic challenges because of food shortage, low temperature, and desiccation stress. Paper wasps of the genus Polistes overwinter as mated adults (gynes) in hibernacula protecting them from predation, snow, and rain but barely from low environmental temperature. In different climates, they face differing overwintering temperature regimes, and therefore they may differ in their energy use. We investigated how much of energy resources built up until autumn is used during diapause dormancy in natural hibernacula by measuring lipid, glycogen, and free carbohydrate content in autumn and early spring in Polistes dominula from temperate European (Austrian) and warm Mediterranean (Italian) climate and Polistes gallicus from Mediterranean climate. Winter energy consumption amounted to ~ 339 and ~ 310 J per wasp in the Austrian and Italian Polistes dominula populations. The smaller Italian Polistes gallicus consumed ~ 247 J. This amounts to 2.62, 2.35, and 1.79 J per day. Of this, the energy demand was mainly fuelled by lipids (84%, 93%, and 90%, respectively), but glycogen stores contributed also considerably (16%, 6%, and 9%). Free carbohydrates decreased only by 0.7%, 1%, and 0.8%. While fat stores seem still sufficient in spring, the wasps depleted most of their carbohydrates. The energy reserves of 396, 400, and 147 J per wasp remaining in spring in the three populations seem sufficient to fuel rest or simple brood care activities for a whole summer but restrict foraging flights to a few hours (~ 3.5-6 h). Results suggest that energy supply might become challenging in expected future climate scenarios., (© 2024. The Author(s).)

A paper-based analytical device (PAD) with an integrated composite electrode has been designed and fabricated for non-enzymatic creatinine sensing. Reduced graphene oxide (rGO) was employed to modify the PAD so that it could function as a solid-contact transducer. A new macrocyclic pyrido-hexapeptide derivative was made and used as a special ionophore in the creatinine membrane sensor. The synthesized PAD showed a detection limit of 1.0 µM (S/N = 3) and a potentiometric response towards creatinine throughout a log-linear range of 2.0 µM-10 mM (R 2  = 0.9998). The sensor shows significant selectivity for a few related substances, including ephedrine, codeine, ketamine, caffeine, urea, urate, carbinoxamine, and dextromethorphan. It has been established that the testing method is appropriate for the direct potentiometric detection of creatinine in a variety of human urine sample types. When an indicating electrode and a reference electrode are put on the same flexible disposable, this lets applications with a small sample volume be done. For point-of-care creatinine measurement, the developed paper-based analytical equipment is a good choice because it is affordable, easily accessible, and self-pumping (especially when combined with potentiometric detection)., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Hydroxyl radical (•OH) detection is pivotal in medicine, biochemistry and environmental chemistry. Yet, electrochemical method-specific detection is challenging because of hydroxyl radicals' high reactivity and short half-life. In this study, we aimed to modify the electrode surface with a specific recognition probe for •OH. To achieve this, we conducted a one-step hydrothermal process to fabricate a CoZnMOF bimetallic organic framework directly onto conductive graphite paper (Gp). Subsequently, we introduced salicylic acid (SA) and methylene blue (MB), which easily penetrated the pores of CoZnMOF. By selectively capturing •OH by SA and leveraging the electrochemical signal generated by the reaction product, we successfully developed an electrochemical sensor Gp/CoZnMOF/SA + MB. The prepared sensor exhibited a good linear relationship with •OH concentrations ranging from 1.25 to 1200 nM, with a detection limit of 0.2 nM. Additionally, the sensor demonstrated excellent reproducibility and accuracy due to the incorporation of an internal reference. It exhibited remarkable selectivity for •OH detection, unaffected by other electrochemically active substances. The establishment of this sensor provides a way to construct MOF-modified sensors for the selective detection of other reactive oxygen species (ROS), offering a valuable experimental basis for ROS-related disease research and environmental safety investigations., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

A smartphone-assisted, paper-based ratio fluorescence probe is presented for the rapid, low-cost and on-site quantification of total flavonol glycosides in Ginkgo biloba extracts (GBE). The Al 3+ /Eu-MOF/paper-based probe utilizes lanthanide metal-organic framework (Ln-MOF) nanoparticles immobilized on Whatman filter paper along with Al 3+ for detecting flavonols, which are the hydrolyzed products of flavonol glycosides. The color change of the paper-based fluorescence image from red to orange depends on the concentration of the target analyte in the sample solution. The smartphone equipped with a red, green, blue (RGB) color detector measured the fluorescence signal intensity on the paper substrate after adding flavonol. The analytical variables affecting the performance of the probe, including the addition sequence of the aluminum nitrate solution, its concentration, that of the Ln-MOF solution, the drying time of the paper probe, the reaction time and the sensitivity parameters of the mobile phone camera (ISO), were optimized. Under optimal conditions, the Al 3+ /Eu-MOF/paper-based probe has good linear response in the concentration range 7 ~ 80 µg mL - 1 and a lower detection limit of 2.07 µg mL - 1 . The results obtained with the paper-based ratio fluorescence probe and smartphone combination were validated by comparing them with high-performance liquid chromatography (HPLC) measurements. This study provides a potential strategy for fabricating Al 3+ /Eu-MOF/paper-based probe used for total flavonol glycosides determination., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

To evaluate the morphology of the "athlete's heart", left ventricular (LV) wall thickness (WT) and end-diastolic internal diameter (LVIDd) at rest were addressed in publications on skiers, rowers, swimmers, cyclists, runners, weightlifters (n = 927), and untrained controls (n = 173) and related to the acute and maximal cardiovascular response to their respective disciplines. Dimensions of the heart at rest and functional variables established during the various sport disciplines were scaled to body weight for comparison among athletes independent of body mass. The two measures of LV were related (r = 0.8; P = 0.04) across athletic disciplines. With allometric scaling to body weight, LVIDd was similar between weightlifters and controls but 7%-15% larger in the other athletic groups, while WT was 9%-24% enlarged in all athletes. The LVIDd was related to stroke volume, oxygen pulse, maximal oxygen uptake, cardiac output, and blood volume (r =  ~ 0.9, P < 0.05), while there was no relationship between WT and these variables (P > 0.05). In conclusion, while cardiac enlargement is, in part, essential for the generation of the cardiac output and thus stroke volume needed for competitive endurance exercise, an enlarged WT seems important for the development of the wall tension required for establishing normal arterial pressure in the enlarged LVIDd., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In this work, a low-cost and eco-friendly paper-based analytical device (PAD) method is described for the determination of phyto-cannabinoids in cannabis and oral fluids based on a simple colorimetric reaction. The PAD was able to distinguish tetrahydrocannabinol (THC)- and cannabidiol (CBD)-rich plant samples by using 4-aminophenol (4-AP) and later on to quantify total phyto-cannabinoid content (THC + CBD + CBN) in plant and oral fluids by using the Fast Corinth V reagent. The chemical and physical properties regarding paper type and reagent concentration in the PAD were optimized to achieve the best analytical performance. After that, analytical features were obtained, including a linear range of 0.01-0.1 mg mL -1 , a limit of detection (LOD) of 0.003 mg mL -1 , and a suitable precision, expressed as relative standard deviation (RSD) lower than 10%. Furthermore, no significant interferences were observed in colorimetric reactions when tea, herbs, and drug samples were analyzed. Additionally, the PAD proved color stability up to 1 month after the sampling at 25 °C. The developed PAD was suitable for determining total phyto-cannabinoid content in plants and oral fluids, obtaining good results compared to GC-MS. Overall, this method showed good reliability resulting in an operational on-site device for drug monitoring., (© 2023. The Author(s).)

A wax-patterned paper analytical device (µPAD) has been developed for point-of-care colourimetric testing of serum glutamic oxaloacetic transaminase (SGOT). The detection method was based on the transamination reaction of aspartate with α-ketoglutarate, leading to the formation of oxaloacetate which reacts with the reagent Fast Blue BB salt and forms a cavern pink colour. The intensity of the cavern pink colour grows as the concentration of SGOT increases. UV-visible spectroscopy was utilized to optimize reaction conditions, and the optimized reagents were dropped onto the wax-patterned paper. The coloured PADs, after the addition of SGOT, have been photographed, and a colour band has been generated to correlate the SGOT concentration visually. The images were used to calculate the intensity values using ImageJ software, which inturn was used to calculate the SGOT concentration. The PADs were also tested with serum samples, and SGOT spiked serum samples. The PAD could detect the SGOT concentration ranging from 5 to 200 U/L. The analysis yielded highly accurate results with less than 6% relative error compared to the clinical sample. This colourimetric test demonstrated exceptional selectivity in the presence of other biomolecules in the blood serum, with a detection limit of 2.77 U/L and a limit of quantification of 9.25 U/L. Additionally, a plasma separation membrane was integrated with the PAD to directly test SGOT from finger-prick blood samples., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

A straightforward distance-based paper analytical device (dPAD) was developed for monitoring sarcosine levels in human samples for the rapid diagnosis and prognosis of prostate cancer and related symptoms. This assay eliminates the need for the expensive horseradish peroxidase (HRP) enzyme by utilizing carbon nanodots (CDs) as a peroxidase-like nanozyme. The proposed dPAD sensor consists of a sample zone pre-deposited with sarcosine oxidase (SOx) and CDs, and a detection zone containing 3,3',5,5'-tetramethylbenzidine (TMB). When a solution containing sarcosine is added to the sample zone, hydroxyl radicals ( • OH) are produced through SOx oxidation and subsequent peroxidase catalysis by the CDs. The formed • OH radicals immediately flow to the detection zone via capillary force, where they oxidize TMB, resulting in a visible colour change from colourless to blue. Sarcosine quantification is effortlessly accomplished by measuring the distance of the blue colour in the detection zone. The developed dPAD offers a linear working range between 12.5 and 35.0 nmol L -1 (R 2  = 0.9959) and a detection limit (LOD) of 10.0 nmol L -1 . This covers the clinical range for urinary sarcosine determination, thereby suggesting no additional sample preparation or dilution is needed. The sensor shows high precision with the highest relative standard deviation (RSD) of 4.58% and demonstrates excellent selectivity with no observed interferences. Furthermore, recovery studies in human control urine samples ranged from 98.67 to 101.50%, with the highest RSD of 2.03%. Correspondingly, our dPAD method showed a great match with the performance of a commercial ELISA method for detecting sarcosine in human control serum. The sensor is more cost-effective, user-friendly, and accessible than previous methods. Overall, the proposed method represents a promising analytical tool for sarcosine quantification. The concept is also applicable for broader analytical applications in detecting other biomolecules., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

A composite material based on CuFe-ZIF-derived CuFe 2 O 4 nano-microspheres grown in situ and well-ordered on carbon sheets (CS) was prepared and applied for highly effective determination of bisphenol A (BPA). The composite material possessed inherently high redox activity due to the presence of both Cu and Fe ions with various oxidation states (Cu²⁺/Cu⁺ and Fe³⁺/Fe²⁺), high specific surface area, uniform distribution of Cu and Fe ions, and a robust framework imparted by its precursor CuFe-ZIF. This led to increased active sites for electrochemical reactions, improved electron transfer efficiency, and structural integrity during electrochemical cycling. Furthermore, combining CS with CuFe 2 O 4 not only provided a large surface area to support well-ordered CuFe₂O₄ nano-microspheres without aggregation, but also enhanced the conductivity and mechanical stability of the CuFe₂O₄/CS composite. This results in synergistic effects that enhanced the overall performance of the composite material. In addition, both copper and iron are relatively non-toxic and abundant, making CuFe₂O₄/CS safe and cost-effective for large-scale applications. Consequently, the CuFe 2 O 4 /CS-modified electrode shows highly efficient electrochemical sensing properties with a wider detection range of 0.009-168 µM and lower detection limit of 0.0027 µM (S/N = 3) compared with most reported BPA sensors. It also has an optimized current at pH 7 which is convenient for real world applications. This CuFe 2 O 4 /CS modified electrode as a highly sensitive electrochemical platform can be applied to monitor BPA concentrations in bottled water with good recovery (97.2-102.2%)., Competing Interests: Declarations Conflict of interest The authors declare no competing interests., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

We aimed to fine-tuning the Timed Water Swallow Test (TWST) screening procedure to provide the most reliable prediction of the Flexible Endoscopic Evaluation of Swallowing (FEES) assessment outcomes, with age, sex, and the presence of clinical signs of dysphagia being considered in the assessment. Participants were healthy people and patients with suspected dysphagia. TWST performance and participants' reported dysphagia symptoms were assessed in terms of their utility in predicting the outcome of a FEES assessment the same day. The FEES assessors were blinded to the nature of the TWST performance. The water swallowing capacity levels and clinical observations during a screening performance that were indicative of dysphagia/no symptoms in FEES were determined. Convergent validity was assessed as the agreement with the Functional Oral Intake Scale (FOIS) in the FEES assessment. TWST predicted FEES findings (aspiration and dysphagia) with a sensitivity of 72 and 45% and a specificity of 75% and 80%, respectively. Extended analysis of the TWST procedure (eTWST) identified aspiration (sensitivity = 92%, specificity = 62%) and dysphagia (sensitivity = 70%, and specificity = 72%) more accurately and showed a high correlation with FOIS (ɸ = 0.37). Excellent inter-rater reliability was further observed (Kw = 0.83). The extended evaluation of TWST performance has superior criterion validity to that of TWST. eTWST displayed high convergent validity and excellent interrater reliability. We therefore believe that eTWST can be highly relevant for clinical dysphagia screening., (© 2024. The Author(s).)

Access to new medicines is crucial for patients but increasingly sparks discussion due to high prices. Simultaneously, the growing emphasis on specialized products and uncertainty surrounding the long-term effectiveness of new drug classes brought to the market underscore the need for innovative pricing approaches. A systematic literature review of pharmaceutical pricing models, accompanied by a critical appraisal, was conducted to offer insights contributing to novel approaches balancing sustainable pharmaceutical innovation with affordability and accessibility for patients. Six different pricing models are identified: value based pricing, basic cost-based pricing, and four more comprehensive pricing models incorporating numerous elements: the cancer-drug-pricing model, AIM model, (Nuijtens) discounted cash flow, and the real-option rate of return method. Although there are many similarities among the models, each has unique assumptions for implementation. For instance, all models except for the standard incremental cost-effectiveness ratio and basic cost-based pricing consider the number of eligible patients and the remaining patent period. Only the AIM model and the Nuijtens discounted cash flow model use lump sums. Both the latter and the real-option rate of return method explicitly include the cost of capital as a major cost-based component. Recognizing the diverse applications of each model highlights the need for more differential and dynamic pricing tailored to the characteristics and therapeutic areas of each drug. Additionally, the study underscores the importance of cost transparency in achieving this goal. Consequently, these findings can help stakeholders develop sustainable and affordable drug pricing mechanisms that address the complexities of the ever-changing pharmaceutical landscape., (© 2024. The Author(s).)

The discovery of enzyme-like catalytic characteristics in nanomaterials triggers the generation of nanozymes and their multifarious applications. As a class of artificial mimetic enzymes, nanozymes are widely recognized to have better stability and lower cost than natural bio-enzymes, but the lack of catalytic specificity hinders their wider use. To solve the problem, several potential strategies are explored, among which molecular imprinting attracts much attention because of its powerful capacity for creating specific binding cavities as biomimetic receptors. Attractively, introducing molecularly imprinted polymers (MIPs) onto nanozyme surfaces can make an impact on the latter's catalytic activity. As a result, in recent years, MIPs featuring universal fabrication, low cost, and good stability have been intensively integrated with nanozymes for biochemical detection. In this critical review, we first summarize the general fabrication of nanozyme@MIPs, followed by clarifying the potential effects of molecular imprinting on the catalytic performance of nanozymes in terms of selectivity and activity. Typical examples are emphatically discussed to highlight the latest progress of nanozyme@MIPs applied in catalytic analysis. In the end, personal viewpoints on the future directions of nanozyme@MIPs are presented, to provide a reference for studying the interactions between MIPs and nanozymes and attract more efforts to advance this promising area., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

Nanozymes are nanomaterials with mimetic enzyme properties and the related research has attracted much attention. It is of great value to develop methods to construct nanozymes and to study their application in bioanalysis. Herein, the metal-ligand cross-linking strategy was developed to fabricate superstructure nanozymes. This strategy takes advantage of being easy to operate, adjustable, cheap, and universal. The fabricated superstructure nanozymes possess efficient peroxidase-like catalytic activity. The enzyme reaction kinetic tests demonstrated that for TMB and H 2 O 2 , the K m is 0.229 and 1.308 mM, respectively. Furthermore, these superstructure nanozymes are applied to highly efficient and sensitive detection of glucose. The linear range for detecting glucose is 20-2000 μM, and the limit of detection is 17.5 μM. Furthermore, mechanistic research illustrated that this integrated system oxidizes glucose to produce hydrogen peroxide and further catalyzes the production of · OH and O 2 ·- , which results in a chromogenic reaction of oxidized TMB for the detection of glucose. This work could not only contribute to the development of efficient nanozymes but also inspire research in the highly sensitive detection of other biomarkers., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

In this study, a ratiometric fluorescent sensor CdTe QDs@ZIF-8 with butterfly spectra is successfully constructed by in situ encapsulating mercaptopropionic acid-modified CdTe quantum dots in zeolitic imidazolate framework-8 (ZIF-8) with a simple strategy, and used for the detection of tetracycline in fluorescence/smartphone colorimetry dual-mode. ZIF-8 not only reduces the agglomeration of the quantum dots but also surprisingly generates a new green fluorescence signal at 524 nm while the red fluorescence of the CdTe quantum dots at 650 nm quenches when tetracycline is added. The two opposing fluorescence signals create a butterfly-shaped fluorescence spectrum, allowing the sensor to detect tetracycline over a linear range of 0-70 μM with the detection limit (LOD) of 0.0155 μM by using a ratiometric fluorescence technique. What is more, based on the obvious color change of the fluorescent sensor gradually from red to green under UV light, a highly stable point-of-care testing sensor has been developed for on-site detection of tetracycline through color recognition by smartphones, which can be used for real-time detection of this antibiotic in the range of 0-1000 μM with the LOD of 0.0249 μM. This work provides a simple and efficient method for the on-site detection of tetracycline., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

The development of cost-effective and highly efficient electrocatalysts is critical to help electrochemical non-enzymatic sensors achieve high performance. Here, a new class of catalyst, Ru single atoms confined on Cu nanotubes as a single-atom alloy (Ru 1 Cu NTs), with a unique electronic structure and property, was developed to construct a novel electrochemical non-enzymatic glucose sensor for the first time. The Ru 1 Cu NTs with a diameter of about 24.0 nm showed a much lower oxidation potential (0.38 V) and 9.0-fold higher response (66.5 μA) current than Cu nanowires (Cu NWs, oxidation potential 0.47 V and current 7.4 μA) for glucose electrocatalysis. Moreover, as an electrochemical non-enzymatic glucose sensor, Ru 1 Cu NTs not only exhibited twofold higher sensitivity (54.9 μA mM -1  cm -2 ) and wider linear range (0.5-8 mM) than Cu NWs, but also showed a low detection limit (5.0 μM), excellent selectivity, and great stability. According to theoretical calculation results, the outstanding catalytic and sensing performance of Ru 1 Cu NTs could be ascribed to the upshift of the d-band center that helped promote glucose adsorption. This work presents a new avenue for developing highly active catalysts for electrochemical non-enzymatic sensors., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

Gold nanoclusters (Au NCs) exhibit broad fluorescent spectra from visible to near-infrared regions and good enzyme-mimicking catalytic activities. Combined with excellent stability and exceptional biocompatibility, the Au NCs have been widely exploited in biomedicine such as biocatalysis and bioimaging. Especially, the long fluorescence lifetime and large Stokes shift attribute Au NCs to good probes for fluorescence sensing and biological detection. In this review, we systematically summarized the molecular structure and fluorescence properties of Au NCs and highlighted the advances in fluorescence sensing and biological detection. The Au NCs display high sensitivity and specificity in detecting iodine ions, metal ions, and reactive oxygen species, as well as certain diseases based on the fluorescence activities of Au NCs. We also proposed several points to improve the practicability and accelerate the clinical translation of the Au NCs., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

Laccase is an enzyme known for its eco-friendly uses in environmental cleanup and biotechnology. However, it has limitations such as low stability, high cost, and complex recycling. So, there is a need for laccase mimics that can effectively imitate its properties. Herein, we created copper formate-lysine nanoparticles (Cuf-Lys) that mimic laccase's activity. The developed Cuf-Lys demonstrated remarkable polyphenol oxidase-like activity, stability, and recyclability, making them suitable for the fabrication of efficient colorimetric sensors for the detection of epinephrine. These sensors had a specific response and could accurately measure epinephrine concentrations ranging from 2.5 to 50 μM, with a detection limit as low as 1 μM. Furthermore, the biosensor demonstrated high sensitivity and selectivity when applied to the detection of rutin. The limit of detection for rutin was determined to be 0.16 μM while in the linear concentration range of 0.25 to 150.0 μM. We believe that Cuf-Lys provide a new route for the design of laccase mimics, showing potential applications for biomedical diagnosis and environmental monitoring., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

The development of an affordable chemiresistive biosensor enhanced with a multi-walled carbon nanotube-zinc oxide (MWCNT-ZnO) nanofiber composite is presented. The sensor leverages the precise interaction between lipoarabinomannan (LAM) tuberculosis (TB) antigens and antibodies to achieve high sensitivity and specificity. The MWCNT-ZnO nanofibers have a larger surface area and better electrical conductivity, which makes it easier for TB antibodies to stick to them. The binding of LAM TB antigens to the fixed Monoclonal Antibody-MBS320597 induces significant resistance changes in the chemiresistive sensor, enabling accurate TB detection. Performance evaluation reveals a linear detection range from 1.0 to 100.0 pg/mL in the lower concentration range and up to 6.0 ng/mL in the higher concentration range, with a sensitivity of 79.750 mA pg mL -1  cm -2 and a lower limit of detection of 40.54 fg/mL. The sensor exhibits a response time of 102 s. Featuring rapid response time and high sensitivity, this biosensor is ideally suited for point-of-care (PoC) applications. The incorporation of MWCNT-ZnO nanofibers shows great potential for enhancing the development of sensitive and cost-effective TB diagnostic tools, which could play a crucial role in advancing global TB control and management efforts., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Introduction: Ophthalmic vascular occlusion due to hyaluronic acid (OVOH) is a rare but devastating complication of cosmetic filler injections, often resulting in severe vision loss., Materials: The methodology involved a systematic search across PubMed, NCBI, Google Scholar, and Cochrane to investigate factors influencing central retinal artery occlusion (CRAO) caused by fillers. Searches focused on "eye vascular anatomy," "ocular physiology in response to ischemia," "components AND hyaluronic acid AND inflammation," "recovery from blindness associated with fillers," "retrobulbar technique," and "hyaluronidase degradation AND fillers." This review examines the pathophysiology, clinical presentation, and management of OVOH by synthesizing findings from case reports, clinical studies, and experimental research. It elucidates retinal vascular anatomy, HA embolization mechanisms, and treatment efficacy, highlighting the critical importance of timely intervention., Results: OVOH typically presents with rapid vision loss within minutes of HA injection, often accompanied by severe ocular pain. The primary treatment, hyaluronidase (HYAL), is most effective when administered early, although retrobulbar HYAL shows limited overall success. Factors such as ischemia duration and the presence of cilioretinal arteries significantly influence retinal survival and recovery. The review discusses the complexities of retinal hypoxia and the implications of various intervention strategies., Conclusion: Timely intervention is crucial for managing OVOH. Although retrobulbar HYAL remains a key treatment option, its effectiveness varies and necessitates optimization. Early and accurate diagnosis is essential, underscoring the need for further research to refine treatment strategies and improve outcomes for patients with retinal vascular occlusions., Level of Evidence Iv: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 ., (© 2024. Springer Science+Business Media, LLC, part of Springer Nature and International Society of Aesthetic Plastic Surgery.)

Polydiacetylene (PDA) holds promise as a versatile material for biosensing applications due to its unique optical properties and self-assembly capabilities. In this study, we developed a colorimetric detection biosensor system utilizing PDA and aptamer for the detection of microcystin-LR (MC-LR), a potent hepatotoxin found in cyanobacteria-contaminated environments. The biosensor was constructed by immobilizing MC-LR-specific aptamer on magnetic beads, where the aptamer was hybridized with a urease-labelled complementary DNA (cDNA-urease). Upon binding MC-LR, the aptamer undergoes a conformational change to release cDNA-urease. The released cDNA-urease is subsequently captured by PDA bearing a single-stranded DNA (ssDNA). The enzymatic reaction triggers a distinctive color transition of PDA from blue to red. The results demonstrate exceptional sensitivity, with a linear detection range of 5-100 ng/mL and a limit of detection as low as 1 ng/mL. The practicability of the colorimetric method was demonstrated by detecting different levels of MC-LR in spiked water samples. The recoveries ranged from 77.3 to 102% and the color change, visible to the naked eye, underscores the practical utility for on-site applications. Selectivity for MC-LR over other microcystin variants (MC-RR and MC-YR) was confirmed. The colorimetric detection platform capitalizes on the properties of PDA and nucleic acid, offering a robust method for detecting small molecules with potential applications in environmental monitoring and public health., (© 2024. The Author(s).)

By preparing Cu@CuO aerogel as a nanozyme which exhibits prominent peroxidase-like (POD) activity, an innovative homogeneous electrochemistry (HEC) coupled with the colorimetry dual-model sensing strategy is proposed to detect perfluorooctane sulfonate (PFOS) for the first time. Cu@CuO aerogel accelerates the oxidation process of colorless o-phenylenediamine to form yellow 2,3-diaminophenazinc (DAP), and meanwhile, DAP as an electroactive substance creates a reduction peak current upon the electrochemical measurements. Interestingly, in the presence of PFOS, the POD activity of Cu@CuO aerogel is inhibited since the specific coordination between PFOS and Cu(II) can cover the active sites, resulting in the color of the sensing system becoming light and the peak current of DAP decreasing. This innovative dual-mode detection method showed excellent electrochemical detection of PFOS in the concentration range 10.0 ~ 1125.0 nM with a limit of detection (LOD) as low as 3.3 nM and a LOD of 20.8 nM in the colorimetric detection in the range 62.3 ~ 875 nM. Furthermore, the sensor was successfully used for the analysis of real samples with an RSD value  ≤ 6.5%. The successful application of this two-mode sensing method for the determination of PFOS holds promise for the detection of other contaminants in the future., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Tumor ablation represents an increasingly important topic in pediatric interventional radiology. Many ablative techniques are well known and established in the adult population, and the adoption of these techniques in the pediatric field is increasing. Image-guided tumor ablation represents a wide category of interventional radiology procedures that can be applied to both benign and malignant pediatric solid tumors. Tumor ablation, either alone or in combination with locoregional therapy, can have curative, debulking, or palliative effects on a wide variety of histological tumor types., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)