Search

• Hazard zone methodology: The paper employs a hazard zone methodology, typically used for managing erosion risk to modern infrastructure, to assess and manage the risk to coastal archaeological heritage. • Coastal archaeological heritage at risk: Coastal archaeological heritage in Aotearoa/New Zealand is under threat from coastal erosion, with accelerated risk due to rising sea levels. • Projected sea-level rise impact: The study predicts that a relatively modest 20 cm of sea-level rise, expected by 2040, may put around 8 % (155) of coastal archaeological sites at risk, and a more significant 1 m of sea-level rise could threaten approximately 19 % (356) of sites. • Connection to indigenous communities: The coastal archaeological heritage is closely tied to Māori, the indigenous ancestral communities of Aotearoa/New Zealand. • Adaptive planning pathways: Scenarios are presented to assist stakeholders in assessing heritage risk, providing an opportunity for coastal managers to incorporate heritage considerations into adaptive planning pathways. Coastal archaeological heritage is in danger of being lost to coastal erosion, the risk of which is amplified by accelerating sea-level rise (SLR). In Aotearoa/New Zealand, coastal archaeological heritage is closely associated with indigenous ancestral communities, but our understanding of the spatiotemporal variability in coastal erosion risk for cultural heritage is limited. Coastal erosion hazard zones have typically been implemented to manage erosion risk to modern infrastructure at regional scales. In this study, we applied a hazard zone methodology in the context of coastal archaeological heritage for a selected region of Aotearoa (Te Tai Tokerau/Northland). Historical coastal change analyses reveal that most beaches in the region have been stable or slightly accretionary over the past ∼80 years, but a reversal of this trend is likely under the projected SLR, which is expressed in the coastal erosion hazard zones. Our analyses indicate that ∼8 % (155) of coastal archaeological sites in Te Tai Tokerau/Northland may be at risk of erosion with a relatively modest 20 cm of SLR, which is expected for the region by 2040, and ∼19 % (356) of sites are threatened by 1 m of SLR. Scenarios are presented that should assist a broad range of stakeholders to assess heritage risk and provide an opportunity for coastal managers to include heritage within adaptive planning pathways. [ABSTRACT FROM AUTHOR]

• Parents' migration status is associated with infant's timely vaccination. • Having a foreign-born mother is positively associated with infant's timely vaccination. • Having a foreign-born father is positively associated with infant's timely vaccination. • Among migrant population, odds of timely vaccination decreases as length of stay increases. • Future research may explore factors behind lower rates of timely vaccination among settled migrants. Migration has been recognized as an important determinant of child health outcomes including childhood vaccination status. This paper aims to examine the association between parental migration status and a less studied aspect of child immunization outcomes, namely timeliness, within the context of New Zealand (NZ), a country characterized by a substantial proportion of its resident population born overseas. Additionally, the study explored the impact of residential duration on children's immunization timeliness. The data was taken from a large, representative population-based cohort study in NZ (Growing Up in NZ study). A total of 6156 children and their parents, comprising 2241 foreign-born and 3915 NZ-born mothers and a sub-group of their partners were included in the analysis. The survey data was linked with the National Immunization Register dataset. Timely immunization was defined as receiving two vaccines at each scheduled vaccination point (at six-week, three-month, and five-month, totaling six doses of vaccines) within 30 days of their due date. We examined the associations between parental migration status, maternal residential duration, and child immunization timeliness while controlling for socio-economic variations. The results were presented as adjusted odds ratios (AORs) with 95 % confidence intervals (CIs). The findings revealed that after adjustment for socioeconomic differences, children of foreign-born mothers exhibited higher odds of receiving all six studied vaccine doses on time compared to children of native-born mothers (AOR 1.51, 95 %CI:1.27–1.78). Similarly, having a foreign-born father was also significantly associated with timely completion of all six vaccine doses. Children of recent immigrants who had resided in the country for less than five years demonstrated higher odds of timely vaccination of all six vaccine doses compared to children of settled immigrants who had lived in the country for five or more years (AOR 1.65, 95 %CI: 1.25–2.19). This study revealed a significant pattern in NZ where immigrants exhibited higher rates of timely immunization for their children compared to native-born parents. However, the findings also underscore the importance of providing support to settled immigrants, as their children experienced declines in timely vaccination rates compared to children of recent immigrants and even those born to NZ-born parents. [ABSTRACT FROM AUTHOR]

• Structural equation modeling approach to analyze EV users' decision-making process. • Acceptability of dynamic wireless charging facilities influenced by latent factors. • User's acceptance and latent constructs are mediated by the intention to use. • Urban users are more likely to adopt DWC technology compared to rural users. • EV experience strengthens the relationship between perceived usefulness and users' intention. Gaining insights into how users perceive dynamic wireless charging (DWC), also known as dynamic wireless power transfer (DWPT), technology for electric vehicle charging is crucial for developing effective measures and policies for its successful integration into the transportation network. This research paper presents a study conducted in New Zealand using an online stated preference survey and employing a structural equation modelling approach. The study investigates users' intention and acceptance of DWC technology, considering various latent factors, while incorporating attributes related to technology acceptance and the theory of planned behaviour in the modelling framework. The findings reveal that perceived concern negatively influences users' intention to use DWC facilities, while perceived usefulness in terms of ease of use and convenience, as well as environmental awareness and social norms, positively impact users' intention. These results offer valuable insights for devising strategies to enhance the acceptance of DWC technology in the future. [ABSTRACT FROM AUTHOR]

• Experiments on the member buckling and ultimate strengths of cold-rolled aluminium alloy channel columns are performed. • The aluminium alloy 5052-H36 materials are used to fabricate the cold-rolled aluminium structural channel columns. • Non-linear FE models are developed using ABAQUS to simulate laboratory experiments and calibrated against the test results. • A parametric study based on FE models is performed to extend the data by varying cross-section dimensions and member lengths. • Experimental and numerical results are ued to calibrate the new design equations for cold-rolled aluminium alloy columns. The paper first presents the development of detailed finite element (FE) models for investigating the member capacity of cold-rolled aluminium alloy 5052-36 channel columns. The numerical non-linear FE models are developed using the commercial FE software package ABAQUS to simulate laboratory experiments and calibrated against the test results. The experimental program was performed by the authors at the University of Sydney and the detailed test results are fully described in a companion paper. The calibrated numerical FE models with actual mechanical properties and measured geometric imperfections in analyses accurately predict the experimental results and behaviours, including flexural and flexural-torsional buckling as well as local-global interaction buckling failure modes. A parametric study is subsequently performed to extend the data range by varying cross-section dimensions and member lengths. The effects of loading eccentricity positions and initial geometric imperfections are also considered in the parametric study. The experimental and numerical results are compared with design strength predictions from current Australian/New Zealand, American and European specifications for aluminium structures in the companion paper. In this paper, the Direct Strength Method (DSM) for the design of compression members as per the Australian/New Zealand standard AS/NZS 4600 for cold-formed steel structures is adopted for comparison. The DSM design rules for cold-formed steel compression members are found to provide more accurate predictions than those of current specifications for aluminium structures and therefore used to propose improved design equations for cold-rolled aluminium alloy columns. Finally, a reliability analysis is performed to evaluate the safety level of current design specifications and the proposed design rules. [ABSTRACT FROM AUTHOR]

• A series of compression tests to investigate member buckling behaviour and ultimate strengths of cold-rolled aluminium alloy channel columns are performed. • The aluminium alloy 5052-H36 materials are used to fabricate the cold-rolled aluminium structural channel columns. • The observed failure modes are flexural, flexural-torsional and local-global interaction buckling failure modes. • The experimental results are compared with predictions by current Australian/New Zealand, North American and European design specifications. Cold-rolled aluminium alloy sections have been recently introduced in Australia as newly developed thin-walled products. To fabricate these sections, the roll-forming process used in cold-formed steel production has been employed, which has proven to be more cost-effective than the conventional extrusion process. This paper describes a series of compression tests to investigate member buckling behaviour and ultimate strengths of cold-rolled aluminium alloy 5052-36 channel columns. Twenty-eight specimens of three commercially available sections (C10030, C25025 and C40030) were tested at the University of Sydney. Two configurations of end boundary conditions were specially designed to capture flexural, flexural-torsional and local-global interaction buckling failure modes. Prior to testing, initial geometric imperfections were measured using a laser scanning method, and flat/corner coupons were tested to determine compressive and tensile strengths of the aluminium alloy material. The experimental results are compared with ultimate column strength predictions by current Australian/New Zealand, North American and European design specifications for aluminium structures. Additionally, the test results provide data for calibration of finite element models of cold-rolled aluminium structural members for use in parametric and similar studies. A companion paper describes such parametric study and the derivation of new design guidelines for member buckling of cold-rolled aluminium channel columns based on the numerical parametric data and the experimental data presented herein. [ABSTRACT FROM AUTHOR]

The aim of stock assessment is to provide managers with an understanding of the biomass and age-/size-composition of a stock, stock status (ideally relative to target and reference points), and to support management decision making, often through projections and application of harvest control rules. Stock assessments are increasingly being used to form the basis for the operating models used to evaluate the ability of management strategies to achieve the goals of fisheries management. Stock assessments for rock lobsters were among the first to adopt size-structured population models as the basis for stock assessment, and population model-based stock assessments have been used extensively to evaluate management strategies for rock lobster stocks in the USA, Australia, New Zealand and South Africa. This paper identifies how closely population model-based stock assessments for rock lobsters satisfy the guidelines identified for best practices for conducting stock assessments during meetings of, for example, the Center for the Advancement of Population Assessment Methodology and papers identifying best practice guidelines for stock assessment. The paper highlights some key directions for stock assessment science for rock lobsters, including considerations related to environmental variation and climate change. [ABSTRACT FROM AUTHOR]

The complexity of farming and rural communities poses challenges to research and extension initiatives seeking industry-wide change. The effectiveness of these initiatives depends on factors ranging from individual psychology to the science of effects. Tools like intervention logic models, which visualise the causal chain of an intervention through to its impact, are useful for programme planning but are of limited usefulness for comparing the relative benefits of initiatives. Benefit-cost analysis can quantify relative benefits, but applications often oversimplify the causal chain and leave key impacts unquantified. This paper aims to develop a benefit-cost analysis modelling framework that both captures the important causal logic from intervention to impact as well as quantifying and monetising key benefit categories. We apply the framework to value the impacts of 'Hill Country Futures', a programme of research and extension designed to assist in future-proofing the environmental sustainability, profitability, and well-being of New Zealand's hill country farmers, their farm systems, and communities. The QUICK (Quantifying and Understanding the Impact of Capability and Knowledge) model uses an agent-based simulation to represent processes of skill development and practice improvement that result from both extension activities for management and research tools as well as the use of those tools. We calibrate the model using a combination of an external predictive adoption model, an expert workshop, and researcher judgment. We use a choice experiment to value simulated changes in financial, environmental, community, and well-being outcomes. We explore how optimising the programme of extension interventions through targeting could increase impact. Our results suggest that the benefits of the 'Hill Country Futures' programme outweigh the costs by a factor of 13.5. We find that targeting extension efforts towards building awareness could be slightly more beneficial than targeting both awareness and skill development. We find no evidence that targeting extension efforts towards the best resource would be beneficial. This paper combines desirable features from intervention logic models, benefit-cost analysis, choice modelling, and agent-based models to value the benefits of a large programme of research and extension. It highlights that such modelling can be useful for evaluating both planned and complete programmes. [Display omitted] • Programme evaluation is dominated by qualitative research and would often benefit from more quantitative analysis. • We evaluate Hill Country Futures, designed to improve the sustainability and profitability of hill country farmers. • We combine intervention logic models with benefit-cost analysis using an agent-based approach informed by choice modelling. • Our results suggest that the programme will deliver substantial benefits compared to costs, with a benefit-cost ratio of 13.5. • We show the potential of using intervention logic with benefit-cost analysis to value agricultural research and extension. [ABSTRACT FROM AUTHOR]

Preventing wildlife from becoming oiled is the priority in an oiled wildlife response. This is achieved through diverting spilled oil away from wildlife, or hazing, deterring, or excluding wildlife from oiled areas. This paper undertakes an international review of techniques deployed for hazing and deterring birds, the taxa most affected, during oil spills. Using these techniques as a baseline it then compares what techniques are used in New Zealand at airports, in agriculture, and at waste management facilities, to assess what could readily be deployed in New Zealand during oil spills, as currently there are few options planned for. As international literature suggests, the best technique is to use a variety of methods for targeted species to reduce habituation. This review highlights international practices that could be tested and implemented, to allow for planning for effective hazing and deterrence practices in New Zealand. • Preventing wildlife from being oiled is the priority in an oiled wildlife response. • This paper reviews the international literature on hazing and deterrence techniques. • Available techniques are then compared with current practices in New Zealand. • The review indicates applicable techniques for inclusion in plans for New Zealand OWR. [ABSTRACT FROM AUTHOR]

Gifts are a powerful way to acknowledge and strengthen interpersonal relationships. As with any relational space, gifting plays various roles in forming and maintaining relationships in political contexts, but its contribution to relationship-building has attracted little attention. This paper examines how politicians in Aotearoa New Zealand both engage with gifting and how they navigate the perceptions of others. Four current members of parliament (MPs) and six retired MPs participated in semi-structured interviews with questions on common practices and common understandings about political gifting. Their responses indicate their use of four different processes: formal processes are the guidelines provided by the government on gifting, but when these are insufficient, contextual processes regarding perceptions of the media, constituents or colleagues are used, or, alternatively, MPs rely on personal values or view gifting in terms of transactional processes with both parties receiving benefits. The paper explores perceptions and complexities of a sequence of gifts during events (event gifting). The authors recommend an improved awareness and understanding of the contribution of gifting practices to political relationship building. [ABSTRACT FROM AUTHOR]

• Develops and tests a conceptual framework of seasonal culture as rhythmic patterns. • Perceived seasonal patterns shift with climatic, environmental and social changes. • People maintain, recalibrate or detach from their seasonal patterns of activities. • Recalibrating seasonal cultures to shifting rhythms is sustainable adaptation. There is a growing literature on the cultural capacities influencing communities' adaptation to environmental and social change, including the temporal frameworks they draw on for timely action. This paper focuses on seasonal cultures, and how they enable communities on the Coromandel Peninsula to interpret and adapt practical timings to disrupted patterns of seasonal rhythms. The paper develops and applies a conceptual framework of seasonal cultures as perceived rhythmic patterns practiced by communities as cultural repertoires for action, emphasising the ways cultures evolve as patterns are contested and change. This concept steered critical, mixed-method ethnographic study with communities on the peninsula over two years. The research found that Coromandel communities' cultures make seasonal change visible as long-term shifts and asynchrony between rhythmic patterns, which they linked to climatic change, environmental degradation, colonisation and globalisation, and shifting relations between society and the environment. As seasonal patterns fail to hold, communities deploy a combination of strategies for re-configuring seasonal rhythms through their practices: (i) maintaining established, institutionalised schemas of activity while coping with seasonal variability; (ii) season-proofing activities from environmental rhythms; or (iii) re-learning and recalibrating cultures to mutable configurations of rhythms in a highly modified environment. [ABSTRACT FROM AUTHOR]

There has been extensive research in traffic state estimation that accounts for the stochastic nature of traffic flow models. However, these studies often exhibit limitations such as an exclusive focus on motorway traffic and a reliance on a single data source. This paper departs from these methods by introducing a stochastic estimation framework that is specifically designed for urban arterial traffic. The framework has the capability to incorporate multiple data sources, which serves to improve its accuracy and robustness. The framework is composed of three components: (i) a stochastic traffic flow model, (ii) a filtering algorithm, and (iii) an algorithm for incorporating multi-source measurements. In terms of the traffic model, we introduce a new stochastic Switching Mode Model that can be applied to arterial roads that have both signalized and unsignalized intersections. This model does not consider uncertainty in the current mode of operation, which substantially reduces the computational complexity because there is only one mode at each time step. Furthermore, we propose three different filtering algorithms for multi-source traffic estimation, including the incremental stochastic Kalman Filter (SKF), the incremental stochastic Unscented Kalman Filter (SUKF), and the hybrid approach. Since the SKF can only deal with linear functions, non-linear measurement equations need to be linearized using first-order Taylor expansions. The SUKF is based on the Unscented Transform (UT), which enables it to work with a wider range of functions regardless of linearity, non-linearity, or non-differentiability. The hybrid algorithm is a combination of the SKF and the SUKF, in which linear equations are treated similarly to the SKF, and non-linear equations are handled with the UT in the same way as in the SUKF. The performances of these algorithms were similar when applied to the synthetic data of an urban arterial in Christchurch CBD, New Zealand. The hybrid algorithm, however, worked slightly better and was more stable than the other two. • Extended Switching Mode Model for signalized/unsignalized corridors. • Efficient approach excludes mode uncertainty but retains stochastic model parameters. • Three filtering algorithms for traffic estimation using multiple data sources. [ABSTRACT FROM AUTHOR]

Forensic identification using vein patterns in standard colour images presents significant challenges due to their low visibility. Recent efforts have employed various computational techniques, including artificial neural networks and optical vein disclosure, to enhance vein pattern detection. However, these methods still face limitations in reliability when compared to Near-Infrared (NIR) reference images. One of the biggest challenges of the studies is the limited number of available datasets that have synchronised colour and NIR images from body limbs. This paper introduces a new dataset comprising 602 pairs of synchronised NIR and RGB forearm images from a diverse population, ethically approved and collected in Auckland, New Zealand. Using this dataset, we also propose a conditional Generative Adversarial Networks (cGANs) model to translate RGB images into their NIR equivalents. Our evaluations focus on matching accuracy, vein length measurements, and contrast quality, demonstrating that the translated vein patterns closely resemble their NIR counterparts. This advancement offers promising implications for forensic identification techniques. • Introducing a new dataset of synchronised NIR and RGB images compromising 301 subjects. • Development of a cGAN model for visualising vein patterns from colour (RGB) images. • The proposed model achieved promising results in terms of accuracy in vein length, contrast, and matching. [ABSTRACT FROM AUTHOR]

In recent years, the nephrotoxicity and carcinogenicity of aristolochic acid have attracted worldwide attention, and the traditional Chinese medicine containing this ingredient has been banned in many places, affecting the TCM industry. To meet this challenge, researchers have developed various detection methods, such as high-performance liquid chromatography, gas chromatography-mass spectrometry and thin-layer chromatography. A rapid detection method must therefore be developed to ensure safety. A polyclonal antibody capable of recognizing aristolochic acid was prepared, and an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) was established to detect the amount of aristolochic acid in the sample to be measured. Methods Using 1-(4-chlorophenyl) cyclobutylamine as a hapten, immunogens and coating antigens were obtained by coupling with bovine serum albumin (BSA) and chicken ovalbumin (OVA) using the active ester method. UV scanning confirmed the successful coupling of the conjugate, and New Zealand white rabbits were immunized. The obtained antibody serum was screened for the best antibody by ic-ELISA detection. Use the chessboard method to determine three optimal combinations of original coating concentration and antibody dilution ratio, establish a standard curve for each combination to obtain the best combination, and establish a rapid detection method. Finally, the standard aristolochic acid A was added to the purchased apple vinegar and canned coffee for recycling experiments to verify the detection method.By changing the antigen antibody concentration, the antibody showed the highest sensitivity to aristolochic acid standard at the original coating, 1000-fold dilution, IC 50 of 24.88 ng/mL, limit of detection IC 10 of 3.19 ng/mL, and detection range IC 20 -IC 80 of 6.81–90.91 ng/mL. The recovery experiments under this conditions yielded a recovery rate of 92%–105%, within reasonable limits, indicating the success of the ELISA rapid detection method. Conclusion The enzyme-linked immunoassay method established in this paper can quickly detect the content of aristolochic acid in the sample to be tested, and the antibody prepared by this method has good broad-spectrum and can detect other aristolochic acid, such as aristolochic acid A, aristolochic acid B, aristolochic acid C, and aristolochic acid D. [Display omitted] • A novel antigenic structure was obtained for the first time. • A homologous coating strategy resulted to a high sensitivity. • A highly sensitive and broadly specific competitive indirect enzyme-linked immunosorbent assay method was developed. [ABSTRACT FROM AUTHOR]

• Twelve pin-ended compression tests on austenitic stainless steel flat–oval hollow section columns were conducted. • Their flexural buckling behaviour about the cross-section major and minor principal axes was studied. • FE models were developed to simulate the test results and then used to perform parametric studies. • The codified buckling curves were evaluated. The flexural buckling behaviour and resistances of cold-formed austenitic stainless steel flat-oval hollow section columns are studied in this paper, based on experiments and numerical modelling. An experimental investigation was firstly conducted and included tensile coupon tests, initial geometric imperfection measurements and major-axis and minor-axis pin-ended compression tests on ten column specimens. The experimental investigation was followed by a numerical investigation, where the column test results were used to validate finite element models; upon validation, parametric studies were conducted to generate additional numerical data over a wide range of cross-section dimensions and member effective lengths. The obtained test and numerical data were adopted to assess the applicability of the relevant buckling curves for cold-formed austenitic stainless steel circular and elliptical hollow section columns, as specified in the European code, American specification and Australian/New Zealand standard, to cold-formed austenitic stainless steel flat-oval hollow section columns. It was revealed from the assessment results that the buckling curves of the European code and American specification led to overall accurate and consistent flexural buckling resistance predictions, while the flexural buckling resistance predictions from the buckling curve of the Australian/New Zealand standard were slightly conservative. [ABSTRACT FROM AUTHOR]

Parents with babies in the neonatal intensive care unit (NICU) experience high levels of stress, anxiety, and depression. The NICU experience may also lead to impaired parenting and early childhood socio-emotional problems. Psychosocial interventions can reduce NICU parent distress. Yet many are time-intensive and costly to deliver. Acceptance and Commitment Therapy (ACT), an evidence-based psychological therapy, may address these needs. ACT has been shown to be effective in reducing distress of parents of children with chronic illnesses, particularly when combined with parent education. Therefore, the primary aim of this study is to determine if a digital intervention that uses a brief form of ACT plus parent education will reduce the stress of primary caregivers with preterm babies in the NICU more than a digital education-only intervention or standard care control group. In a randomised controlled cluster trial design, participants will be randomly assigned to one of three groups: ACT plus education; education-only; or standard care control. The primary outcome will be parental/caregiver stress levels, measured on the Parental Stress Scale: Neonatal Intensive Care Unit. Secondary outcomes include overall stress, anxiety, and depression. Outcome measures will be evaluated at baseline, two weeks after enrolment, discharge to home, and 3-months post-discharge. This study will explore the efficacy of a digital ACT plus education intervention on parental stress levels. While position papers have advocated for the use of ACT with NICU parents, this study will be the first to test ACT as a stand-alone intervention with this population. This trial was prospectively registered with the Australian New Zealand Clinical Trials Registry on 14 June 2023 (ACTRN12623000641695p). [ABSTRACT FROM AUTHOR]

• The flexural buckling behaviour of austenitic stainless steel semi-oval hollow section columns was studied. • Twelve pin-ended column tests were conducted. • FE models were developed to validate against the test results and then adopted to conduct parametric studies. • The codified buckling curves were evaluated and led to an overall good level of design accuracy. Semi-oval hollow section is an innovative cross-section profile and consists of one semi-circular flange, one flat flange and two flat webs. While the semi-circular flange (exposed to fluid or wind) offers a low level of hydrodynamic or aerodynamic drag, the flat elements facilitate connections with other members. The flexural buckling behaviour and resistances of austenitic stainless steel semi-oval hollow section columns are investigated in this paper. An experimental programme was firstly conducted on two austenitic stainless steel semi-oval hollow sections, with six column specimens of varying member lengths adopted for each cross-section, and included tensile coupon tests, initial geometric imperfection measurements and pin-ended column tests. Both 'C'-shaped flexural buckling (with failure specimens bowing towards semi-circular flanges) and 'reverse C'-shaped flexural buckling (with failure specimens bowing towards flat flanges) were observed upon testing. The experimental programme was accompanied by a numerical modelling programme, with finite element models developed to simulate the test results and then adopted to conduct parametric studies to generate further numerical data. On the basis of the test and numerical data, the relevant buckling curves for austenitic stainless steel circular hollow section columns, as provided in the European code, American specification and Australian/New Zealand standard, were evaluated for their applicability to austenitic stainless steel semi-oval hollow section columns. The evaluation results generally revealed that the codified buckling curves led to overall accurate and consistent flexural buckling resistance predictions when used for austenitic stainless steel semi-oval hollow section columns. [ABSTRACT FROM AUTHOR]

Although the management of emerging environmental risks has received more attention recently, planning and public policy scholars have not yet generated consensus on management approaches for environmental and occupational risks that remain poorly described, unquantified, and may be potentially 'unknowable'. Our case study focuses on exposure to respirable mineral dust (RMD), a specific category of particulate air pollution which includes examples such as respirable crystalline silica and asbestos fibres, as an example of a risk that is emerging and that has often 'escaped' regulations in many countries. This article (i) reviews prevailing risk management strategies and (ii) discusses their limitations when applied to the unique characteristics of RMD. The aim of the paper is to examine the suitability of existing risk management approaches for the evaluation of emerging environmental risks, which are bounded by significant uncertainties in quantifying the likelihood of the occurrence and/or severity of the hazard. We identify potential improvements to these strategies, highlighting the value of different protection levels, strategies, measures, and proactive actions which are enabled within an adaptive management framework that responds more nimbly to future changes. • Synthesised the challenges of managing respirable mineral dust. • Seven risk management approaches are most useful for different risk characteristics. • Identified improvements to these strategies for emerging environmental risks. • Potential improvements of strategies that respond more nimbly to future changes. [ABSTRACT FROM AUTHOR]

Delirium is prevalent in the hospice population. Despite causing significant distress to patients and families, delirium is under-recognised. There is a need to better understand delirium prevention and outcomes in this population including people's experiences of delirium-prevention strategies in different cultural contexts. To determine whether the "PRESERVE Aotearoa" delirium prevention intervention was feasible and acceptable for Māori (indigenous peoples of Aotearoa/ New Zealand) and non-Māori patients with advanced cancer, their families (called whānau in this paper), and clinical staff. A qualitative semistructured interview substudy of a cohort PRESERVE Aotearoa feasibility study codesigned with a Māori partner to ensure inclusion of Māori-centred values. The study was underpinned conceptually by He Awa Whiria (braided rivers)—combining Western and Māori knowledges. Data were analysed using Hopwood and Srivasta's framework. Twenty-six patients and their whānau, 21 clinical staff and five researchers from two stand-alone hospices in the North Island, Aotearoa/New Zealand. Finding showed that, for the most part, participants considered the study interventions feasible and acceptable. Inductive analysis resulted in four themes highlighting the importance to whānau of their participation in the study: benefits of learning about delirium; the affirmation of the caregiver role and whānau-centred care; valuing fundamentals of care; and research as legacy. This qualitative study found that it is feasible and acceptable to study multicomponent nonpharmacological delirium-prevention interventions in Aotearoa/New Zealand hospice inpatient units. The study also highlights the value of Māori-centred approaches and whānau involvement in these settings. [ABSTRACT FROM AUTHOR]

This paper presents experimental and numerical investigations into the web crippling behaviour and load-carrying capacity of stainless steel built-up I-section members under End-Two-Flange (ETF) concentrated transverse loading. An experimental programme was conducted on 23 austenitic and duplex stainless steel built-up I-section specimens, with each consisting of two identical press-braked channel sections assembled back-to-back by means of self-tapping screws. Following the experimental programme, a numerical modelling programme was performed, where finite element models were firstly developed to replicate the tests and then used to conduct parametric studies. Based on the test and numerical data, the existing design rules for stainless steel built-up I-section members failing by web crippling, as set out in the current European, American and Australian/New Zealand design standards, were assessed. The comparisons indicated that the European and Australian/New Zealand design standards resulted in overly conservative and rather scattered failure load predictions, while the American design standard led to less scattered failure load predictions, but with many predictions on the unsafe side. Therefore, an improved design approach was proposed and shown to provide substantially improved failure load predictions for stainless steel built-up I-section members under End-Two-Flange loading. • The web crippling behaviour of stainless steel built-up I-sections under ETF loading was studied. • Tests were conducted on 23 stainless steel built-up I-section specimens. • FE models were developed and validated against test results and then used for parametric studies. • The existing codified design rules were assessed and a new design approach was proposed. [ABSTRACT FROM AUTHOR]

• The compressive behaviour of square RACFSST stub columns after exposure to fire is investigated. • Twelve post-fire compression tests are conducted. • The influences of heating durations and RCA replacement ratios are discussed. • Thermal and mechanical FE models are validated against test results and then used to conduct parametric studies. • The relevant design codes are assessed against the test and FE data. Experimental and numerical studies on the cross-section compressive behaviour and residual resistances of square recycled aggregate concrete-filled stainless steel tube (RACFSST) stub columns after exposure to fire are reported in this paper. An experimental programme was firstly carried out on twelve stub column specimens with three recycled coarse aggregate replacement ratios (0%, 35% and 70%) after exposure to the ISO-834 standard fire for 0 min (i.e. at ambient temperature), 15 min, 30 min and 45 min. The test results, including load–end shortening curves, failure loads and failure modes, were presented, with the initial compressive stiffness and confinement effect analysed. The experimental programme was followed by a numerical modelling programme, where thermal and mechanical finite element models were developed and validated against the test results and afterwards used to conduct parametric studies to generate additional numerical data over a wide range of cross-section dimensions. Based on the test and numerical data, the relevant design rules for square natural aggregate concrete-filled carbon steel tube stub columns at ambient temperature, as specified in the European code, Australia/New Zealand standard and American specification, were evaluated, using post-fire material properties, for their applicability to square RACFSST stub columns after exposure to fire. The evaluation results generally revealed that the European code and Australian/New Zealand standard led to a good level of design accuracy, while the American specification resulted in slightly conservative post-fire cross-section compression resistance predictions. [ABSTRACT FROM AUTHOR]

The purpose of this paper is (i) to re-assess the presence of submarine fan systems of Middle and Late Miocene age (Moki and Mount Messenger formations) previously mapped on the continental slope in offshore southern and central Taranaki Basin, New Zealand, and (ii), to demonstrate the occurrence of two newly mapped Late Miocene submarine fans in the deep-water part of offshore western Taranaki Basin, based on accepted seismic stratigraphic criteria for submarine fans. In our work we have found that the fans previously mapped amongst canyons and channels in the Moki and Mount Messenger formations on the upper and middle continental slope in southern and central Taranaki Basin do not fulfil established stratal criteria for submarine fan deposits. Moreover, detuning of 3D seismic reflection volumes for the Moki and Mount Messenger formation intervals ahead of amplitude attribute extraction, shows that the strata previously mapped as submarine fans based on amplitude alone, are merely artifacts of bed thickness. The two new fans systems of Late Miocene age that we map here, both attributed to the Mount Messenger Formation, principally comprise mudstone and represent a minor proportion of the Late Miocene succession that accumulated in southern and central parts of the basin. Our remapping of slope canyons and channels in the southern part of the basin and the identification of the two new fan systems in the western part of the basin are embodied in three new paloegeographic maps for the Middle and Late Miocene development of Taranaki Basin. A modern analogue for the two new Late Miocene fans in Taranaki Basin is the Hikurangi Fan at the terminus of the Hikurangi Channel, located outboard of the modern subduction zone of the Hikurangi margin along Eastern North Island. The new Taranaki Basin deep-water fans documented here, may have significance for hydrocarbon exploration in deep water parts of Taranaki Basin, which is largely unexplored. • New seismic geomorphologic mapping of the upper Moki and lower Mount Messenger formations in Taranaki Basin, New Zealand. • Critical reassessment of previously published submarine fan systems in southern and central Taranaki Basin and their dismissal on standard seismic stratigraphic criteria. • Seismic mapping of two new submarine fan systems in western Taranaki Basin. • Updated Taranaki Basin palaeogeographic maps for ∼14 Ma, ∼12 Ma and ∼6 Ma. [ABSTRACT FROM AUTHOR]

This paper presents experimental and numerical investigations into the post-fire cross-section compressive behaviour and resistances of circular recycled aggregate concrete-filled stainless steel tube (RACFSST) stub columns. Twelve stub column specimens, fabricated from concretes with three recycled coarse aggregate replacement ratios (0%, 35% and 70%), were tested after exposure to the ISO-834 standard fire for 0 min (i.e. at ambient temperature), 15 min, 30 min and 45 min. The experimental investigation included heating and cooling of specimens, cylinder tests and post-fire tensile coupon tests and stub column tests. The test results, including load–end shortening curves, failure loads and failure modes, were fully reported and the initial compressive stiffnesses and confinement effect were discussed. The numerical investigation was subsequently conducted, where thermal and mechanical finite element models were developed and validated against the test results and then used to perform parametric studies to generate further numerical data. Given the absence of design codes for stainless steel–recycled aggregate concrete composite structures after exposure to fire, the relevant design rules for circular natural aggregate concrete-filled carbon steel tube stub columns at ambient temperature, as set out in the European code, Australia/New Zealand standard and American specification, were assessed, using post-fire material properties, for their applicability to circular RACFSST stub columns after exposure to fire, based on the test and numerical data. The assessment results generally revealed that the European code and the Australian/New Zealand standard led to an acceptable level of design accuracy and consistency, while the American specification resulted in rather conservative and scattered post-fire cross-section compression resistance predictions. • The compressive behaviour of circular RACFSST stub columns after exposure to fire is investigated. • Post-fire compression tests on twelve circular RACFSST stub column specimens are conducted. • The influences of heating durations and RCA replacement ratios are analysed. • Thermal and mechanical FE models are validated against test results and then used to conduct parametric studies. • The relevant design codes are assessed against the test and FE data. [ABSTRACT FROM AUTHOR]

In geotechnical engineering, an appreciation of local geological conditions from similar sites is beneficial and can support informed decision-making during site characterization. This practice is known as "site recognition", which necessitates a rational quantification of site similarity. This paper proposes a data-driven method to quantify the similarity between two cross-sections based on the spatial variability of one soil property from a spectral perspective. Bayesian compressive sensing (BCS) is first used to obtain the discrete cosine transform (DCT) spectrum for a cross-section. Then DCT-based auto-correlation function (ACF) is calculated based on the obtained DCT spectrum using a set of newly derived ACF calculation equations. The cross-sectional similarity is subsequently reformulated as the cosine similarity of DCT-based ACFs between cross-sections. In contrast to the existing methods, the proposed method explicitly takes soil property spatial variability into account in an innovative way. The challenges of sparse investigation data, non-stationary and anisotropic spatial variability, and inconsistent spatial dimensions of different cross-sections are tackled effectively. Both numerical examples and real data examples from New Zealand are provided for illustration. Results show that the proposed method can rationally quantify cross-sectional similarity and associated statistical uncertainty from sparse investigation data. The proposed method advances data-driven site characterization, a core application area in data-centric geotechnics. • A novel method is proposed for quantifying 2D cross-sectional similarity of soil property spatial variability • An efficient formulation of 2D auto-correlation function is derived for a unified representation of 2D spatial variability • The challenges of sparse investigation data, non-stationarity, and inconsistent cross-sectional dimensions are tackled • The proposed method facilitates the quasi-regional clustering of geotechnical data [ABSTRACT FROM AUTHOR]

As significant stakeholders in the marine estate, Māori will play a central role in the proposed transition to a blue economy. While te ao Māori (the Māori worldview) aligns well with the blue economy, due to the consequences of colonisation and the specific circumstances caused by the Quota Management System and resulting Treaty of Waitangi settlement legislation addressing historic Māori grievances regarding fishing rights, Māori also face a number of extra constraints regarding this transition. This paper examines these constraints, arguing that these they are largely due to the current legal framework. • As significant stakeholders in marine estate, Māori are vital to blue economy shift. • However, Māori must overcome fragmentation, commodification, and centralisation. • These constraints are largely a product of the current institutional framework. • A range of institutional, organisational, and operational changes are required. [ABSTRACT FROM AUTHOR]

This paper reports experimental and numerical investigations into the structural behaviour and resistances of high strength concrete-filled stainless steel tube (HCFSST) beam-columns under combined compression and bending. An experimental investigation was conducted on sixteen HCFSST beam-columns specimens fabricated from stainless steel tubes with two cross-section sizes and high strength concretes with four material grades, and included concrete cylinder tests, tensile coupon tests, initial global geometric imperfection measurements and eccentric compression tests. The test setups and procedures were fully reported and the experimental observations were discussed and analysed in detail. It was found that the plane cross-section assumption was valid for eccentrically loaded HCFSST sections and the lateral deflection distribution patterns for HCFSST beam-columns were approximately half-sine wave shapes. The test results were used in a subsequent numerical investigation for the validation of finite element models, which were then employed to conduct parametric studies to generate additional numerical data over a wide range of cross-section dimensions, member lengths and loading combinations. Based on the experimental and numerical results, the relevant design rules, as set out in the European code, American specification and Australian/New Zealand standard, were evaluated for their applicability to HCFSST beam-columns. The evaluation results revealed that the European code provided accurate but scattered failure load predictions when used for HCFSST beam-columns, while the American specification and Australian/New Zealand standard resulted in conservative and scattered failure load predictions. • The behaviour of high strength concrete-filled stainless steel tube (HCFSST) beam-columns is investigated. • Eccentric compression tests on sixteen HCFSST beam-column specimens are conducted. • The ductility, strength, longitudinal strain development and lateral deflection distribution are analysed. • FE models are developed to validate against the test results and then used to conduct parametric studies. • The applicability of relevant design codes is assessed against test and FE data. [ABSTRACT FROM AUTHOR]

The flexural buckling behaviour and resistances of press-braked stainless steel Z-section columns are investigated in this paper, based on experiments and numerical modelling. An experimental investigation was conducted on two press-braked stainless steel Z-sections and included material testing, initial geometric imperfection measurements and twelve fixed-ended column tests. Minor-axis flexural buckling was observed for all press-braked stainless steel Z-section column specimens upon testing. The key obtained fixed-ended column test results, including failure loads, load–deformation histories and failure modes, were fully reported. Following the experimental investigation, a numerical investigation was performed, with finite element models developed to validate against the fixed-ended column test results and then used to conduct parametric studies to generate additional numerical data. On the basis of the test and numerical data, the relevant buckling curves, as specified in the European code, American specification and Australian/New Zealand standard, were evaluated and shown to provide accurate and consistent flexural buckling resistance predictions for press-braked stainless steel Z-section columns. • The flexural buckling behaviour of press-braked stainless steel Z-section columns was studied. • Twelve fixed-ended column tests were conducted. • FE models were developed to validate against the test results and then used to perform parametric studies. • The codified buckling curves were assessed, showing good design accuracy and consistency. [ABSTRACT FROM AUTHOR]

• The web crippling behaviour of cold-formed steel channels with elongated un-stiffened and edge-stiffened web holes under end-two-flange loading condition was studied numerically. • The results of a total of 1536 new finite element analysis were reported. • Design formulae in the form of the web crippling reduction factors were proposed. • The direct strength method (DSM) equations were also presented to evaluate web crippling strengths. Over the last decade, cold-formed steel (CFS) channels with circular edge-stiffened web holes have been widely used in New Zealand. In the case of web crippling, previous studies have revealed that the use of an edge-stiffened hole almost results in the same strength as an equivalent channel-section having a plain web. Such circular edge-stiffened web holes could be extended to elongated holes. In terms of web crippling, however, no experimental or numerical works on such elongated holes were reported in the literature. In this paper, a numerical investigation was carried out to investigate the web crippling behaviour of CFS channels with elongated un-stiffened and edge-stiffened web holes under the end-two-flange (ETF) loading condition. The finite element (FE) models were validated against the test results of CFS channels with circular edge-stiffened web holes; good agreement in terms of the load-displacement relationships and failure modes was shown. A parametric study was then conducted, comprising 1,536 FE models. Compared to CFS channels with a plain web, for the case of channels with an elongated un-stiffened web hole, the average web crippling strength reduction for sections with an aspect ratio of two and three was 21 % and 36 %, respectively. However, for an elongated edge-stiffened hole, the reduction in the web crippling strength was only 5 % and 8 %, respectively. Finally, design equations in the form of the web crippling reduction factor (R p) and the equations based on the direct strength method (DSM) for CFS channels with elongated web holes under ETF loading conditions were recommended. [ABSTRACT FROM AUTHOR]

We construct 2-D numerical models of bulk heat and water transport from the mid-crust (10 km depth) to the surface in a 20 km-wide continental rift, based on observations from the Taupō Rift in the central Taupō Volcanic Zone (TVZ) of New Zealand. The model represents a simplified geological setting with two low-permeability basement-like rock-types, the first defining the margins of the rift and the second a distinct 'rifted basement'. The rift is overlain with a 2 km-thick, 20 km-wide layer of shallow volcanic infill. At the base of model there is a 10 km-deep heat source (the 'hotplate') with a specified TVZ-like heat flux of 0.77 Wm−2 and a 'target' average hotplate temperature of 700o to 900 °C, required to maintain the low melt fractions at ∼10 km depth inferred from geophysics. Parameterising the permeability of the rifted basement is a key part of the paper as it enables both the heat flux boundary condition and a temperature constraint to be satisfied at the hotplate. More generally, it allows the flexibility to control the depth of temperature contours which represent proxies for geophysical measurements. It is described as a power-law for log 10 (horizontal component of permeability, kh) with specified values of kh at two depths and a power law exponent as free parameters. Viable models which satisfy all constraints for the hydrothermal system beneath the TVZ rift have a power-law exponent less than ∼0.4, shallow (2 km deep) kh's of 10–14.0 to 10–13.0 m2, and deep (10 km) kh's <10–16.5 m2. The vertical component of the rifted basement permeability, kv, is ten times higher than kh. A generic feature of the models is that irregular, unsteady convection occurs in the upper ∼5 km of the rift. This results in temporal and spatial fluctuations in heat and fluid flow which are interpreted as high-temperature TVZ-like geothermal systems which have temperatures of ca. 300 °C at 2 km depth. Over the nominal simulation time of 3 Myr, approximately 40% of the geothermal systems are clustered within ∼2 km of the rift margins, with the remainder distributed roughly uniformly across the rift. Between the geothermal systems cool recharge from the surface occurs, with temperatures as low as 50 °C occurring at 5 km depth. The models successfully match temperature proxies for the depths of maximum seismicity (450 °C) and shallowest partial melt (> 700 °C) inferred from geophysical observations. Heat transport within the rift is dominated by convection. This is true even at 10 km depth, at the base of the geothermal systems, where kh in the rifted basement approaches 10−17 m2. In this situation, the relatively large value of vertical permeability kv, ∼ 10−16 m2, allows convection to occur. Conductive heat transport dominates in regions ∼1 km in vertical extent immediately above the hotplate and between the geothermal systems. The vigour of the hydrothermal systems is controlled by the permeability of the shallow volcanics, through which all cold surface recharge and hot outflows of fluid occur. Models with low permeability for the shallow volcanics produce longer lasting and higher temperature geothermal systems, and those with high permeability produce fewer and cooler geothermal systems. • We create a 2D source to surface models of the hydrothermal system below the TVZ. • Models with constant basement permeability cannot satisfy geophysical constraints 81. • We parameterise permeability vs depth in the basement rock 58. • The parameterisation allows models to respect temperature proxies for all constraints 85. [ABSTRACT FROM AUTHOR]

Palm kernel expeller (PKE), a by-product of the palm oil production process in Indonesia, has evolved into a billion-dollar export 'flex' commodity to feed cows in intensified dairy production in New Zealand. As the PKE trade grew in New Zealand, the dairy industry became a transnational behemoth and a leading global exporter. Through our examination of PKE, an understudied commodity, we reveal the ways that ecological degradation to local, regional, and world-ecologies are exacerbated and intertwined. This paper argues that neoliberalisation of regulatory and trade policy, both within and between the two countries, laid the groundwork for the growth of the ecologically destructive palm oil operations of Indonesia as well as the intensified dairy operations in New Zealand, both of which rely on dispossession of Indigenous lands. Our theorisation builds on the flex commodity literature by analyzing the ways PKE became an 'environmental fix' and part of a transnational waste regime linking two semiperipheral regions. This environmental fix for the dairy industry temporarily limits the negative impacts of climate change induced drought. The world-ecology(ies) of such 'fixes' is becoming increasingly urgent and increasingly tenuous in the face of climate change. [ABSTRACT FROM AUTHOR]

New Zealand is a peaceful nation, but ongoing political tensions and inequities between Māori (the indigenous peoples of New Zealand) and Pākehā (the majority group of Europeans) persist as a result of its colonial history. Identifying ways to redress the enduring legacy of colonialism are therefore of critical importance. Accordingly, this paper examines data from 7017 Māori, as well as 37,233 Pākehā, to examine the impact of regional-level Pākehā warmth towards Māori on Māori support for progressive collective action. Results reveal that Pākehā warmth towards Māori varies markedly across 257 regional wards (regional units created for New Zealand electoral purposes). Moreover, multilevel modelling demonstrates that Pākehā warmth towards Māori at the region-level correlates positively with Māori identity and political efficacy at the individual level which, in turn, both correlate positively with collective action support. Collectively, these results demonstrate the impact of the broader social climate on social change, while identifying a previously-unknown facilitator of collective action support (namely, a broader context of warmth towards structurally disadvantaged groups). [ABSTRACT FROM AUTHOR]

Kaikōura Canyon, offshore Aotearoa/New Zealand, is a hotspot for deep-sea benthic biology with globally high faunal abundance. The M w 7.8 Kaikōura earthquake in 2016 triggered a severe disturbance that reshaped the canyon, evacuating an estimated 850 metric megatonnes of sedimentary material down canyon. The Kaikōura Canyon habitat is now recovering from this removal of both seafloor substrate and associated organisms. We measured post-event benthic macrofauna density together with biomass and sediment properties and related these to infaunal bioturbation activity, sediment community oxygen consumption (SCOC) and associated benthic macronutrient biogeochemical fluxes. Three legacy sites were used as reference along a depth transect of the canyon axis at 917, 1249, and 1480 m water depths. We found distinct differences in benthic functioning between sites. While many parameters measured followed the expected relationships of decreasing with depth some benthic biological activity metrics did not. Our data suggests that the sites differ based on the relative impact and type of disturbance experienced during the earthquake-triggered, canyon-flushing event. We find SCOC was linked to bioturbatory behaviour and sediment organic matter content, rather than taxa density or biomass. While the greatest bioturbation activity was measured at the shallowest site, the greatest SCOC was measured at the middle depth site due to elevated sediment organic matter content. These observations provide a wider benchmark for infaunal bioturbation and faunal-mediated biogeochemical processes in deep-sea canyon environments and provide rare insights of recovery trajectories for deep-sea benthic communities and ecosystem function after large seafloor disturbances. • Post-event canyon benthic community abundance and function metrics decrease with depth for most parameters quantified. • Higher than expected sediment community oxygen consumption (SCOC) was measured at the middle depth site. • SCOC in the canyon is relatively high co mpared to other comparable Pacific deep-sea locations. • SCOC was linked to bioturbatory behaviour and sediment organic matter content, rather than faunal abundance or biomass. [ABSTRACT FROM AUTHOR]