Search

Recently, a large number of nosocomial infections have been caused by an emerging pathogen that is rising as a worldwide issue in human health: Candida auris. This yeast is considered resistant to antifungals of the first-line therapies, and consequently it is related to morbidity and mortality. Therefore, the aim of this research was to determine the in vitro anti-C. auris activity against twenty-three resistant clinical strains of different essential oils (EOs), pure or in combination with traditional antifungal agents, mainly caspofungin, fluconazole, micafungin and 5-flucytosine. Broth dilution assay was performed to evaluate the fungistatic and fungicidal effectiveness of fifteen EOs towards all the C. auris isolates. The data demonstrated that EOs were able to prevent C. auris growth, with MIC values ranging from 0.03 to 1% for the efficacious EOs (thyme, cinnamon, geranium, clove bud, lemongrass and mentha of Pancalieri), whereas the MICs were >1% for the ineffective ones. Thereafter, the six most effective EOs were used to perform the checkerboard experiments by assaying simultaneously the activity of EOs and traditional antifungals towards two selected strains. The most promising synergic combinations towards C. auris, depending on the isolate, were those with micafungin and geranium, thyme, cinnamon, lemongrass or clove bud EOs, with fluconazole and mentha of Pancalieri EO, and with 5-flucytosine and mentha of Pancalieri EO. These EOs and their combinations with antifungal drugs may provide a useful therapeutic alternative that could reduce the dose of the individual components, limiting the overall side effects. These associations might be a prospective option for the future treatment of infections, thus helping to overcome the challenging issue of resistance in C. auris.

Recently Candida auris has emerged as a multi-resistant fungal pathogen, with a significant clinical impact, and is able to persist for a long time on human skin and hospital environments. It is a critical issue on the WHO fungal priority list and therefore it is fundamental to reinforce hospital surveillance protocols to limit nosocomial outbreaks. The purpose of this study was to apply Fourier transform infrared spectroscopy (FT-IR) to investigate the phylogenetic relationships among isolated strains from a C. auris outbreak at the University Intensive Care Unit of a Tertiary University hospital in Turin (Italy). To calculate a clustering cut-off, intra- and inter-isolate, distance values were analysed. The data showed the presence of a major Alfa cluster and a minor Beta cluster with a defined C. auris clustering cut-off. The results were validated by an external C. auris strain and Principal Component and Linear Discriminant Analyses. The application of FT-IR technology allowed to obtain important information about the phylogenetic relationships between the analysed strains, defining for the first time a “not WGS-based” clustering cut-off with a statistical–mathematical approach. FT-IR could represent a valid alternative to molecular methods for the rapid and cost-saving typing of C. auris strains with important clinical implications.

With respect to other fields, bone tissue engineering has significantly expanded in recent years, leading not only to relevant advances in biomedical applications but also to innovative perspectives. Polycaprolactone (PCL), produced in the beginning of the 1930s, is a biocompatible and biodegradable polymer. Due to its mechanical and physicochemical features, as well as being easily shapeable, PCL-based constructs can be produced with different shapes and degradation kinetics. Moreover, due to various development processes, PCL can be made as 3D scaffolds or fibres for bone tissue regeneration applications. This outstanding biopolymer is versatile because it can be modified by adding agents with antimicrobial properties, not only antibiotics/antifungals, but also metal ions or natural compounds. In addition, to ameliorate its osteoproliferative features, it can be blended with calcium phosphates. This review is an overview of the current state of our recent investigation into PCL modifications designed to impair microbial adhesive capability and, in parallel, to allow eukaryotic cell viability and integration, in comparison with previous reviews and excellent research papers. Our recent results demonstrated that the developed 3D constructs had a high interconnected porosity, and the addition of biphasic calcium phosphate improved human cell attachment and proliferation. The incorporation of alternative antimicrobials—for instance, silver and essential oils—at tuneable concentrations counteracted microbial growth and biofilm formation, without affecting eukaryotic cells’ viability. Notably, this challenging research area needs the multidisciplinary work of material scientists, biologists, and orthopaedic surgeons to determine the most suitable modifications on biomaterials to design favourable 3D scaffolds based on PCL for the targeted healing of damaged bone tissue.

Candida spp. periprosthetic joint infections are rare but difficult-to-treat events, with a slow onset, unspecific symptoms or signs, and a significant relapse risk. Treatment with antifungals meets with little success, whereas prosthesis removal improves the outcome. In fact, Candida spp. adhere to orthopedic devices and grow forming biofilms that contribute to the persistence of this infection and relapse, and there is insufficient evidence that the use of antifungals has additional benefits for anti-biofilm activity. To date, studies on the direct antifungal activity of silver against Candida spp. are still scanty. Additionally, polycaprolactone (PCL), either pure or blended with calcium phosphate, could be a good candidate for the design of 3D scaffolds as engineered bone graft substitutes. Thus, the present research aimed to assess the antifungal and anti-biofilm activity of PCL-based constructs by the addition of antimicrobials, for instance, silver, against C. albicans and C. auris. The appearance of an inhibition halo around silver-functionalized PCL scaffolds for both C. albicans and C. auris was revealed, and a significant decrease in both adherent and planktonic yeasts further demonstrated the release of Ag+ from the 3D constructs. Due to the combined antifungal, osteoproliferative, and biodegradable properties, PCL-based 3D scaffolds enriched with silver showed good potential for bone tissue engineering and offer a promising strategy as an ideal anti-adhesive and anti-biofilm tool for the reduction in prosthetic joints of infections caused by Candida spp. by using antimicrobial molecule-targeted delivery.

In both healthcare and agriculture, antibiotic resistance is an alarming issue. Biocompatible and biodegradable ingredients (e.g., curcumin) are given priority in “green” criteria supported by the Next Generation EU platform. The solubility and stability of curcumin would be significantly improved if it were enclosed in nanobubbles (NB), and photoactivation with the correct wavelength of light can increase its antibacterial efficacy. A continuous release of curcumin over a prolonged period was provided by using innovative chitosan-shelled carriers, i.e., curcumin-containing nanobubbles (Curc-CS-NBs) and oxygen-loaded curcumin-containing nanobubbles (Curc-Oxy-CS-NBs). The results demonstrated that after photoactivation, both types of NBs exhibited increased effectiveness. For Staphylococcus aureus, the minimum inhibitory concentration (MIC) for Curc-CS-NBs remained at 46 µg/mL following photodynamic activation, whereas it drastically dropped to 12 µg/mL for Curc-Oxy-CS-NBs. Enterococcus faecalis shows a decreased MIC for Curc-CS-NB and Curc-Oxy-CS-NB (23 and 46 µg/mL, respectively). All bacterial strains were more effectively killed by NBs that had both oxygen and LED irradiation. A combination of Curc-Oxy-CS-NB and photodynamic stimulation led to a killing of microorganisms due to ROS-induced bacterial membrane leakage. This approach was particularly effective against Escherichia coli. In conclusion, this work shows that Curc-CS-NBs and Curc-Oxy-CS-exhibit extremely powerful antibacterial properties and represent a potential strategy to prevent antibiotic resistance and encourage the use of eco-friendly substitutes in agriculture and healthcare.

Background: Treatment options for aspergillosis include amphotericin B (AMB) and azole compounds, such as itraconazole (ITZ). However, serious side effects related to these antifungal agents are increasingly evident, and resistance continues to increase. Currently, a new trend in drug discovery to overcome this problem is represented by natural products from plants, or their extracts. Particularly, there is a great interest in essential oils (EOs) recognized for their antimicrobial role towards bacteria, fungi and viruses. Methods: In this study, we evaluated the antifungal activity of eleven commercial EOs—clove, eucalyptus, geranium, hybrid lavender, lavender, lemon, lemongrass, neroli, oregano, tea tree and red red thyme—in comparison with AMB and ITZ against Aspergillus flavus, A. fumigatus and A. niger clinical isolates. Antifungal activity was determined by broth microdilution method, agar diffusion technique, fungistatic and fungicidal activities and vapor contact assay. Results: Gas chromatography–mass spectrometry analysis displayed two groups of distinct biosynthetical origin: monoterpenes dominated the chemical composition of the most oils. Only two aromatic compounds (eugenol 78.91% and eugenyl acetate 11.64%) have been identified as major components in clove EO. Lemongrass EO exhibits the strongest antimicrobial activity with a minimum inhibitory concentration of 0.56 mg/mL and a minimum fungicidal concentration of 2.25–4.5 mg/mL against Aspergillus spp. strains. Clove and geranium EOs were fairly effective in inhibiting Aspergillus spp. growth. Conclusions: These results demonstrate the antimicrobial potential of some EOs and support the research of new alternatives or complementary therapies based on EOs.

There is a growing interest in tissue engineering, in which biomaterials play a pivotal role in promoting bone regeneration. Furthermore, smart functionalization can provide biomaterials with the additional role of preventing orthopedic infections. Due to the growing microbial resistance to antimicrobials used to treat those infections, metal ions, such as silver, thanks to their known wide range of bactericidal properties, are believed to be promising additives in developing antibacterial biomaterials. In this work, novel poly(ε-caprolactone) (PCL)-based 3D scaffolds have been designed and developed, where the polymer matrix was modified with both silver (Ag), to supply antibacterial behavior, and calcium phosphates (biphasic calcium phosphate, BCP) particles to impart bioactive/bioresorbable properties. The microstructural analysis showed that constructs were characterized by square-shaped macropores, in line with the morphology and size of the templating salts used as pore formers. Degradation tests demonstrated the important role of calcium phosphates in improving PCL hydrophilicity, leading to a higher degradation degree for BCP/PCL composites compared to the neat polymer after 18 days of soaking. The appearance of an inhibition halo around the silver-functionalized PCL scaffolds for assayed microorganisms and a significant (p < 0.05) decrease in both adherent and planktonic bacteria demonstrate the Ag+ release from the 3D constructs. Furthermore, the PCL scaffolds enriched with the lowest silver percentages did not hamper the viability and proliferation of Saos-2 cells. A synergic combination of antimicrobial, osteoproliferative and biodegradable features provided to 3D scaffolds the required potential for bone tissue engineering, beside anti-microbial properties for reduction in prosthetic joints infections.

Chronic wounds (CWs) are typically characterized by persistent hypoxia, exacerbated inflammation, and impaired skin tissue remodeling. Additionally, CWs are often worsened by microbial infections. Oxygen-loaded nanobubbles (OLNBs), displaying a peculiar structure based on oxygen-solving perfluorocarbons such as perfluoropentane in the inner core and polysaccharydes including chitosan in the outer shell, have proven effective in delivering oxygen to hypoxic tissues. Antimicrobial properties have been largely reported for chitosan. In the present work chitosan/perfluoropentane OLNBs were challenged for biocompatibility with human skin cells and ability to promote wound healing processes, as well as for their antimicrobial properties against methicillin-resistant Staphylococcus aureus (MRSA) and Candida albicans. After cellular internalization, OLNBs were not toxic to human keratinocytes (HaCaT), whereas oxygen-free NBs (OFNBs) slightly affected their viability. Hypoxia-dependent inhibition of keratinocyte migratory ability after scratch was fully reversed by OLNBs, but not OFNBs. Both OLNBs and OFNBs exerted chitosan-induced short-term bacteriostatic activity against MRSA (up to 6 h) and long-term fungistatic activity against C. albicans (up to 24 h). Short-term antibacterial activity associated with NB prolonged adhesion to MRSA cell wall (up to 24 h) while long-term antifungal activity followed NB early internalization by C. albicans (already after 3 h of incubation). Taken altogether, these data support chitosan-shelled and perfluoropentane-cored OLNB potential as innovative, promising, non-toxic, and cost-effective antimicrobial devices promoting repair processes to be used for treatment of MRSA- and C. albicans-infected CWs.

Chronic wounds (resulting from underlying disease, metabolic disorders, infections, trauma, and even tumours) pose significant health problems. In this work, microparticles, based on polysaccharides (maltodextrin or dextran) and amino acids, and doped with antibacterial nanoparticles (CuO or ZnO NPs) are designed. Smart nano-in-microparticles with a hierarchical 3D structure are developed. The ultimate goal aims at an innovative platform to achieve skin repair and to manage skin colonization by avoiding infection that could delay and even impair the healing process. The microparticles are prepared by spray-drying and cross-linked by heating, to obtain insoluble scaffolds able to facilitate cell proliferation in the wound bed. The nano-in-microparticles are characterized using a multidisciplinary approach: chemico–physical properties (SEM, SEM-EDX, size distribution, swelling and degradation properties, structural characterization - FTIR, XRPD, SAXS – mechanical properties, surface zeta potential) and preclinical properties (in vitro biocompatibility and whole-blood clotting properties, release studies and antimicrobial properties, and in vivo safety and efficacy on murine burn/excisional wound model) were assessed. The hierarchical 3D nano-in microparticles demonstrate to promote skin tissue repair in a preclinical study, indicating that this platform deserves particular attention and further investigation will promote the prototypes translation to clinics.

Background: According to recent studies, tens of millions of tons of fruit are wasted each year in Europe in primary production and home/service consumption. Among fruits, berries are most critical because they have a shorter shelf life and a softer, more delicate, and often edible skin. Curcumin is a natural polyphenolic compound extracted from the spice turmeric (Curcuma longa L.) which exhibits antioxidant, photophysical, and antimicrobial properties that can be further enhanced by photodynamic inactivation of pathogens when irradiated with blue or ultraviolet light. Materials and methods: Multiple experiments were performed in which berry samples were sprayed with a complex of β-cyclodextrin containing 0.5 or 1 mg/mL of curcumin. Photodynamic inactivation was induced by irradiation with blue LED light. Antimicrobial effectiveness was assessed with microbiological assays. The expected effects of oxidation, curcumin solution deterioration, and alteration of the volatile compounds were investigated as well. Results: The treatment with photoactivated curcumin solutions reduced the bacterial load (3.1 vs. 2.5 colony forming units/mL (UFC/ml) in the control and treated groups; p-value = 0.01), without altering the fruit organoleptic and antioxidant properties. Conclusions: The explored method is a promising approach to extend berries’ shelf life in an easy and green way. However, further investigations of the preservation and general properties of treated berries are still needed.

Abstract Background Hydrolates, complex mixtures containing traces of essential oils (EOs), are inexpensive, easy to make and less toxic than their corresponding EOs. The antibacterial and antifungal activity of the hydrolate of Coridothymus capitatus (L.) Reichenb. fil. (Lamiaceae) alone and in combination with antimicrobial drugs, such as tetracycline and itraconazole, were evaluated. Methods The chemical composition was analysed by gas-chromatography-mass spectrometry (GC-MS). Standard methods were performed to evaluate the susceptibility of some Gram-positive and Gram-negative bacteria, and Candida spp. to the hydrolate, in comparison with its EO. The hydrolate mechanism of action was assayed by propidium iodide and MitoTracker staining. Checkerboard tests were carried out for combinations studies. Results GC-MS identified 0.14% (v/v) of total EO content into hydrolate and carvacrol as a dominant component. The hydrolate showed a good antimicrobial activity against bacteria and yeasts. It exhibited a synergistic effect with itraconazole against Candida krusei, and an additive effect with tetracycline against methicillin-resistant Staphylococcus aureus strains. Hydrolate changed the membranes permeability of bacteria and yeasts and altered mitochondrial function of yeasts. Conclusions Our study extends the knowledge by exploiting non-conventional antimicrobial agents to fight the emergence of antibiotic resistance.

Streptococcus pyogenes causes a wide spectrum of diseases varying from mild to life threatening, despite antibiotic treatment. Nanoparticle application could facilitate the foreign pathogen fight by increasing the antimicrobial effectiveness and reducing their adverse effects. Here, we designed and produced erythromycin-loaded chitosan nanodroplets (Ery-NDs), both oxygen-free and oxygen-loaded. All ND formulations were characterized for physico-chemical parameters, drug release kinetics, and tested for biocompatibility with human keratinocytes and for their antibacterial properties or interactions with S. pyogenes. All tested NDs possessed spherical shape, small average diameter, and positive Z potential. A prolonged Ery release kinetic from Ery-NDs was demonstrated, as well as a favorable biocompatibility on human keratinocytes. Confocal microscopy images showed ND uptake and internalization by S. pyogenes starting from 3 h of incubation up to 24 h. According to cell counts, NDs displayed long-term antimicrobial efficacy against streptococci significantly counteracting their proliferation up to 24 h, thanks to the known chitosan antimicrobial properties. Intriguingly, Ery-NDs were generally more effective (104–103 log10 CFU/mL), than free-erythromycin (105 log10 CFU/mL), in the direct killing of streptococci, probably due to Ery-NDs adsorption by bacteria and prolonged release kinetics of erythromycin inside S. pyogenes cells. Based on these findings, NDs and proper Ery-NDs appear to be the most promising and skin-friendly approaches for the topical treatment of streptococcal skin infections allowing wound healing during hypoxia.

The use of essential oils is increasingly being investigated among new therapeutic approaches based on medicinal plants and their extracts. With the wide use of synthetic and semi-synthetic antimicrobial drugs, the spread of drug-resistant clinical isolates has increased, and research is directed towards natural products, such as essential oils, as useful antimicrobial resources. In the context of a prospective infection, we compared the impact of essential oils and common antimicrobial agents on the microbicidal activity of human phagocytes. Here, we present the results of our decades-long investigation into the effectiveness of thyme red oil (26.52% thymol chemotype), tea tree oil (TTO), and Mentha of Pancalieri [(Mentha x piperita (Huds) var. officinalis (Sole), form rubescens (Camus) (Lamiaceae)] essential oils on human polymorphonuclear leukocytes (PMNs) capacity to kill clinical strains of Candida albicans and C. krusei when compared to three antifungal drugs used to treat candidiasis (fluconazole, anidulafungin, and caspofungin) These essential oils demonstrate antifungal drug-like and/or superior efficacy in enhancing intracellular killing by PMNs, even at subinhibitory concentrations. Our results are compared with data in the literature on essential oils and immune system interactions. This comparison would aid in identifying therapeutic solutions to the increasingly prevalent antibiotic resistance as well as filling in any remaining knowledge gaps on the bioactivity of essential oils.

ABSTRACT Positive and negative ions (PAIs and NAIs, respectively) generated by air ionizers curb indoor spread of airborne pathogens through cellular oxidative damage. Thus, here, we asked whether ion exposure of Staphylococcus aureus and Escherichia coli bacteria—either plated on agar or trapped in air filters—would affect their viability and whether this effect would be influenced by variations in bacterial type and load, action area, distance from the ion generator, exposure time, or filter type. We selected these two vegetative bacterium species because, besides being representative of Gram-positive and Gram-negative strains, respectively, they are widely recognized as the two most common airborne pathogens. We observed a robust ion inhibitory effect on the viability of free bacteria regardless of the experimental condition employed. Specifically, 12-h ion exposure of plated S. aureus and E. coli, at either 5 cm or 10 cm from the ion source, reduced bacterial viability by ∼95% and 70%, respectively. Furthermore, 3-h ion exposure was sufficient to reduce the viability of both bacterial species trapped in filters. Our results showing a strong antibacterial activity of PAI and NAI under all experimental conditions tested further support the use of air ionizers for preventing and/or containing airborne infection in domestic and nondomestic settings. IMPORTANCE Indoor air is a well-established vehicle for direct and indirect spread of a wide variety of human pathogens—as bioaerosols are composed of bacteria, viruses, fungi, and other types of organisms—that may trigger some pathologies. Plasmacluster ionizers are known for their ability to generate positively or negatively charged air ions (PAIs and NAIs, respectively) that can kill/inactivate indoor airborne pathogens, through oxidative stress-induced damage, in various environments. Given these premises, the aim of this study was to evaluate the viability of Gram-positive and Gram-negative bacteria exposed to PAI and NAI under different experimental variables such as bacterial type and load, action area, distance from the ion generator, ion exposure time, and filter type. Altogether, our findings, demonstrating a remarkable PAI and NAI antibacterial activity, stress the importance of using air ionizers to prevent indoor airborne infection.

Infections triggered by filamentous fungi placed in the order Mucorales, phylum Zygomycota, can cause serious harm to immunocompromised patients. Since there is lack of a standardized PCR (polymerase chain reaction) assay for early diagnosis of this fungal infection, this work was aimed to develop a new PCR assay able to detect the presence of Mucorales genera in clinical specimens. Here, we describe a novel diagnostic TaqMan MGB probe assay for precise and rapid detection of the most common clinical species of Mucorales. Zygomycete-specific oligonucleotides were designed to specifically amplify and bind highly conserved sequences of fungal 28S rRNA gene. Additionally, we succeeded in differentiating Mucorales species (i.e., Rhizopus, Lichtheimia, Mucor, and Rhizomucor) in artificially infected serum samples, suggesting that the quantitative capability of this real-time PCR assay could potentially optimize the diagnosis of mucormycosis.

Abstract Background Tinea capitis is a cutaneous fungal infection common among 3 to 7 year old children but it is rare in the first year of life. Case presentation We present a case of a 12-month-old infant with erythematous scalp lesions combined with hair loss. He was suspected of dermatophytosis and mycological analysis of all suspected lesions was performed. Clinical features and culture results confirmed tinea capitis caused by Microsporum canis. The infant patient was treated with griseofulvin for 2 months. However, 15 days later at the end of treatment he presented with a single vesicle positive for M. canis. Griseofulvin therapy continued for another month. After 3 months of follow-up, no recurrence was observed. Conclusions In infant, sometimes tinea capitis is misdiagnosed and underreported because it is similar to other scalp pathologies. Therefore, if erythematous scalp lesions are present, they must be examined from a mycological point of view to inform the differential diagnosis. Once diagnosed, treatment of tinea capitis can pose a dilemma because different factors may influence the choice between equally effective therapies (i.e. safety, age, formulation, cost). This case report suggests that it is important to establish an accurate diagnosis and treatment for this dermatophytosis to avoid recurrences or therapeutic failures, especially in infants.

The aim of this in vitro study was to compare three disinfection protocols of biofilm-coated machined (MAC) and acid etched (SLA) commercial pure Grade 4 Titanium disks. Samples were infected with a vial of polymicrobial biofilm to simulate peri-implantitis in vitro. Seventeen MAC and twenty SLA titanium disks were randomly assigned to: (1) glycine powder air-flow (GYPAP) for 1 min; (2) a local delivered triple paste antibiotic composed by a gel mixture with ciprofloxacin, metronidazole, and clarithromycin (3MIX) for 1 h; and (3) a combination of both (GYPAP + 3MIX). Biocompatibility of the titanium disks after each treatment protocol was assessed by measurement of adhesion and growth of adipose-derived mesenchymal stem cells (ASCs) after 24 and 72 h. A confocal laser scanning microscope (CLSM) assessed the antibacterial effect of each treatment. Data of the antibacterial efficacy and cell viability were presented as mean with standard deviation and calculated by one-way ANOVA with multiple comparisons via Bonferroni tests. Results were considered significant with p < 0.05. The higher cell viability was achieved by the 3MIX and GYPAP combination on the SLA surfaces after 72 h. CLSM analysis showed a mean ratio of dead bacteria statistically higher in the 3MIX + GYPAP group compared with the GYPAP and 3MIX subgroups (p < 0.05). In conclusion, data showed that the combination of GYPAP and 3MIX could be preferred to the other protocols, especially in presence of SLA titanium surface.

The aim was to evaluate the antibacterial efficacy and penetration depth into dentinal tubules of a solution of chitosan nanodroplets (NDs) loaded with Benzalkonium Chloride (BAK). Seventy-two human single-root teeth with fully formed apex were used. Cylindrical root dentin blocks were longitudinally sectioned and enlarged to a size of a Gates Glidden drill #4. After sterilization, root canals were infected with Enterococcus faecalis ATCC 29212 and further incubated for three weeks. Specimens were assigned to three experimental groups (n = 20), plus positive (n = 6) and negative (n = 6) controls. In the first group, irrigation was achieved with 2 mL of NDs solution loaded with BAK (NDs-BAK), in the second with 2 mL of 5% sodium hypochlorite (NaOCl) and in the last with 2 mL of 2% chlorhexidine (CHX). Specimens were rinsed and vertically fractured. Confocal laser scanning microscopy (CLSM) and viability staining were used to analyze the proportions of dead and live bacteria quantitatively. The volume ratio of red fluorescence (dead) was calculated in 3D reconstructions. Data were analyzed by one-way ANOVA and post hoc Bonferroni tests (p < 0.05). The ratio of red fluorescence over the whole green/red fluorescence resulted in a significant comparison of NDs-BAK with NaOCl (p < 0.01) and NaOCl with CHX (p < 0.01). No differences were found between NDs-BAK and CHX (p > 0.05). The mean depth of efficacy was, respectively: NDs-BAK 325.25 μm, NaOCl 273.36 μm and CHX 246.78 μm with no statistical differences between groups. The NaOCl solution showed the highest antimicrobial efficacy, but nanodroplets with BAK seemed to have the same effect as CHX with a high depth of efficacy.

In the search for non-chemical and green methods to counteract the bacterial contamination of foods, the use of natural substances with antimicrobial properties and light irradiation at proper light waves has been extensively investigated. In particular, the combination of both techniques, called photodynamic inactivation (PDI), is based on the fact that some natural substances act as photosensitizers, i.e., produce bioactive effects under irradiation. Notably, curcumin is a potent natural antibacterial and effective photosensitizer that is able to induce photodynamic activation in the visible light range (specifically for blue light). Some practical applications have been investigated with particular reference to food preservation from bacterial contaminants.

Abstract Background Cryptococcal infections, besides being a problem for immunocompromised patients, are occasionally being a problem for immunocompetent patients. In addition, the lower susceptibility of this yeast to azoles is a growing problem in health care. To date, there are very few molecules with any activity towards Cryptococcus neoformans, leading to heightened interest in finding new alternatives or adjuvants to conventional drugs for the treatment of mycosis caused by this yeast. Since the essential oils (EOs) are considered as a potential rich source of bioactive antimicrobial compounds, we evaluated the antifungal activity of Origanum vulgare (oregano), Pinus sylvestris (pine), and Thymus vulgaris (thyme red) EOs, and their components (α-pinene, carvacrol, thymol) compared with fluconazole, itraconazole, and voriconazole, against C.neoformans clinical strains. Then, we investigated the effect of EOs and components in combination with itraconazole. Methods EO composition was analysed by Gas chromatography-mass spectrometry (GC-MS). A broth microdilution method was used to evaluate the susceptibility of C.neoformans to azoles, EOs and components. Checkerboard tests, isobolograms and time-kill assays were carried out for combination studies. Results Six C.neoformans isolates were susceptible to azoles, while one C.neoformans exhibited a reduced susceptibility to all tested azole drugs. All EOs exerted a good inhibitory activity against all C.neoformans strains. Pine EO was the most effective. Among components, thymol exerted the most remarkable activity. By checkerboard testing and isobolographic analysis, combinations of itraconazole with oregano, pine, or thyme EOs, and carvacrol were found to be synergistic (FICI≤0.5) against azole susceptible C.neoformans. Regarding the azole not susceptible C.neoformans strain, the synergistic effect with itraconazole was observed with thyme EO (chemotype: thymol 26.52%; carvacrol 7.85%), and carvacrol. Time-kill assays confirmed the synergistic effects of itraconazole and oregano or thyme EO against azole susceptible C.neoformans. Binary mixtures of itraconazole/thyme EO or carvacrol yielded additive effects on the azole not susceptible C.neoformans. Conclusions Our findings highlight the potential effectiveness of thyme, oregano EOs, and carvacrol as natural and cost-effective adjuvants when used in combination with itraconazole. Identification of EOs exerting these effects could be one of the feasible ways to overcome drug resistance, reducing drug concentration and side effects.

The epidemiology of yeast infections and resistance to available antifungal drugs are rapidly increasing, and non-albicans Candida species and rare yeast species are increasingly emerging as major opportunistic pathogens. In order to identify new strategies to counter the threat of antimicrobial resistant microorganisms, essential oils (EOs) have become an important potential in the treatment of fungal infections. EOs and their bioactive pure compounds have been found to exhibit a wide range of remarkable biological activities. We investigated the in vitro antifungal activity of nine commercial EOs such as Thymus vulgaris (thyme red), Origanum vulgare (oregano), Lavandula vera (lavender), Pinus sylvestris (pine), Foeniculum vulgare (fennel), Melissa officinalis (lemon balm), Salvia officinalis (sage), Eugenia caryophyllata (clove) and Pelargonium asperum (geranium), and some of their main components (α-pinene, carvacrol, citronellal, eugenol, γ-terpinene, linalool, linalylacetate, terpinen-4-ol, thymol) against non-albicans Candida strains and uncommon yeasts. The EOs were analyzed by GC-MS, and their antifungal properties were evaluated by minimum inhibitory concentration and minimum fungicidal concentration parameters, in accordance with CLSI guidelines, with some modifications for EOs. Pine exhibited strong antifungal activity against the selected non-albicans Candida isolates and uncommon yeasts. In addition, lemon balm EOs and α-pinene exhibited strong antifungal activity against the selected non-albicans Candida yeasts. Thymol inhibited the growth of all uncommon yeasts. These data showed a promising potential application of EOs as natural adjuvant for management of infections by emerging non-albicans Candida species and uncommon pathogenic yeasts.

Persistent hypoxia is a main clinical feature of chronic wounds. Intriguingly, oxygen-loaded nanodroplets (OLNDs), filled with oxygen-solving 2H,3H-decafluoropentane and shelled with polysaccharides, have been proposed as a promising tool to counteract hypoxia by releasing a clinically relevant oxygen amount in a time-sustained manner. Here, four different types of chitosan (low or medium weight (LW or MW), glycol-(G-), and methylglycol-(MG-) chitosan) were compared as candidate biopolymers for shell manufacturing. The aim of the work was to design OLND formulations with optimized physico-chemical characteristics, efficacy in oxygen release, and biocompatibility. All OLND formulations displayed spherical morphology, cationic surfaces, ≤500 nm diameters (with LW chitosan-shelled OLNDs being the smallest), high stability, good oxygen encapsulation efficiency, and prolonged oxygen release kinetics. Upon cellular internalization, LW, MW, and G-chitosan-shelled nanodroplets did not significantly affect the viability, health, or metabolic activity of human keratinocytes (HaCaT cell line). On the contrary, MG-chitosan-shelled nanodroplets showed very poor biocompatibility. Combining the physico-chemical and the biological results obtained, LW chitosan emerges as the best candidate biopolymer for future OLND application as a skin device to treat chronic wounds.

Over the past 20–30 years, Trichophyton rubrum represented the most widespread dermatophyte with a prevalence accounting for 70% of dermatophytosis. The treatment for cutaneous infections caused by Trichophyton spp. are imidazoles (ketoconazole (KTZ)) and triazoles (itraconazole (ITZ)). T. rubrum can develop resistance to azoles after prolonged exposure to subinhibitory concentrations resulting in therapeutic failures and chronic infections. These problems have stimulated the search for therapeutic alternatives, including essential oils, and their potential use in combination with conventional antifungals. The purpose of this study was to evaluate the antifungal activity of tea tree oil (TTO) (Melaleuca alternifolia essential oil) and the main components against T. rubrum and to assess whether TTO in association with KTZ/ITZ as reference drugs improves the antifungal activity of these drugs. We used a terpinen-4-ol chemotype (35.88%) TTO, and its antifungal properties were evaluated by minimum inhibitory and minimum fungicidal concentrations in accordance with the CLSI guidelines. The interaction between TTO and azoles was evaluated through the checkerboard and isobologram methods. The results demonstrated both the fungicide activity of TTO on T. rubrum and the synergism when it was used in combination with azoles. Therefore, this mixture may reduce the minimum effective dose of azole required and minimize the side effects of the therapy. Synergy activity offered a promise for combination topical treatment for superficial mycoses.

The aim of this study was to evaluate the ability of a PIPS (photon-induced photoacoustic streaming) Er:YAG laser to reduce the root canal system bacterial count in vivo in comparison to the traditional irrigation technique. The post-operative patients’ quality of life (QoL) after endodontic therapy was evaluated through a questionnaire. Fifty-four patients affected by pulp necrosis with or without apical periodontitis biofilm disease were selected for endodontic treatment and randomly assigned to Group A (n = 27) with traditional irrigation and Group B (n = 27), with PIPS irrigation applied according to the protocol. Shaping was performed with ProGlider and ProTaper Next, and irrigation was performed with 5% NaOCl and 10% EDTA. Intracanal samples for culture tests were collected before and after irrigation. The microbiological analysis was evaluated by the Kolmogorov–Smirnov normality and Mann–Whitney tests (p < 0.05). A self-assessment questionnaire was used to evaluate the QoL during the 7 days after treatment; differences were analysed with Student’s t-test. Irrigation with the PIPS device was significantly effective in reducing bacterial counts, which were higher for facultative than obligate anaerobic strains, particularly for Gram-negative bacteria, without statistical significance (p > 0.05). There were no significant differences among the QoL indicators, except for the maximum pain (p = 0.02), eating difficulty (p = 0.03) and difficulty performing daily functions (p = 0.02) in the first few days post-treatment. PIPS may represent an aid to root canal disinfection not affecting the patients’ QoL, particularly for the first day after treatment.

Confocal laser scanning microscopy (CLSM) was used to evaluate the antibacterial effect and depth of action of a novel clarithromycin-containing triple antibiotic mixture, which was proposed for root canal disinfection in dental pulp regeneration. A previous study reported that this mixture had no tooth discoloration effects in vitro. After infection with Enterococcus faecalis for 3 weeks, the dentinal tubules in the cylindrical root specimens were exposed to different antibiotic mixtures: ciprofloxacin, metronidazole and minocycline (3-MIX); ciprofloxacin, metronidazole and clarithromycin (3-MIXC) and ciprofloxacin and metronidazole (2-MIX). Each antibiotic formulation was mixed with macrogol (MG) or hyaluronic acid (HA) vehicles. CLSM and viability staining were used to quantitatively analyze the mean depth of the antibacterial effect and the proportions of dead and live bacteria inside the dentinal tubules. The 3-MIX and 3-MIXC demonstrated a similar depth of action. The mean proportion of dead bacteria was similar in the 3-MIX and 3-MIXC groups, and both were statistically higher than that of 2-MIX (p = 0.014). Each antibiotic mixture showed a higher bactericidal efficacy if conveyed with HA, compared to MG (3-MIX, p = 0.019; 3-MIXC, p = 0.013 and 2-MIX, p = 0.0125). The depth of action and the antibacterial efficacy of 3-MIXC seemed comparable with 3-MIX.

The aim of this study was to evaluate the influence of tea tree oil (TTO) and “Mentha of Pancalieri” essential oil (MPP) on intracellular killing of Candida krusei, often resistant to conventional drugs, by polymorphonuclear leucocytes (PMNs). Intracellular killing was investigated by incubating yeasts and PMNs with essential oils (EOs) at 1/4 and 1/8 × MIC (Minimal Inhibitory Concentration), in comparison with anidulafungin, used as a reference drug. Killing values were expressed as Survival Index (SI) values. The cytotoxicity of EOs was evaluated by 3-[4,-5-dimethylthiazole-2-yl]-2,5-diphenyltetrazolium bromide (MTT) assay. Both EOs were more efficaceous at 1/8 × MIC than 1/4 × MIC, with killing values higher than observed in EO-free systems and in presence of anidulafungin, indicating that the decreasing concentrations did not cause lower candidacidal activity. This better activity at 1/8 × MIC is probably due to the EOs’ toxicity at 1/4 × MIC, suggesting that at higher concentrations EOs might interfere with PMNs functionality. TTO and MPP at 1/8 × MIC significantly increased intracellular killing by PMNs through their direct action on the yeasts (both EOs) or on phagocytic cells (MPP), suggesting a positive interaction between EOs and PMNs to eradicate intracellular C. krusei. These data showed a promising potential application of TTO and “Mentha of Pancalieri” EO as natural adjuvants in C. krusei infection management.

The promising antimicrobial activity of essential oils (EOs) has led researchers to use them in combination with antimicrobial drugs in order to reduce drug toxicity, side effects, and resistance to single agents. Mentha x piperita, known worldwide as “Mentha of Pancalieri”, is produced locally at Pancalieri (Turin, Italy). The EO from this Mentha species is considered as one of the best mint EOs in the world. In our research, we assessed the antifungal activity of “Mentha of Pancalieri” EO, either alone or in combination with azole drugs (fluconazole, itraconazole, ketoconazole) against a wide panel of yeast and dermatophyte clinical isolates. The EO was analyzed by GC-MS, and its antifungal properties were evaluated by minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) parameters, in accordance with the CLSI guidelines, with some modifications. The interaction of EO with azoles was evaluated through the chequerboard and isobologram methods. The results suggest that this EO exerts a fungicidal activity against yeasts and a fungistatic activity against dermatophytes. Interaction studies with azoles indicated mainly synergistic profiles between itraconazole and EO vs. Candida spp., Cryptococcus neoformans, and Trichophyton mentagrophytes. Thus, the “Mentha of Pancalieri” EO may act as a potential antifungal agent and could serve as a natural adjuvant for fungal infection treatment.

The physico–chemical and biological properties of nanostructured ZnO are combined with the non-toxic and eco-friendly features of the scCO2-mediated drug loading technique to develop a multifunctional antimicrobial drug delivery system for potential applications in wound healing. Two nanostructured ZnO (NsZnO) with different morphologies were prepared through wet organic-solvent-free processes and characterized by means of powder X-ray diffraction, field emission scanning electron microscopy (FESEM), and nitrogen adsorption analysis. The antimicrobial activity of the two samples against different microbial strains was investigated together with the in vitro Zn2+ release. The results indicated that the two ZnO nanostructures exhibited the following activity: S. aureus > C. albicans > K. pneumoniae. A correlation between the antimicrobial activity, the physico–chemical properties (specific surface area and crystal size) and the Zn2+ ion release was found. Ibuprofen was, for the first time, loaded on the NsZnO carriers with a supercritical CO2-mediated drug impregnation process and in vitro dissolution studies of the loaded drug were performed. A successful loading up to 14% w/w of ibuprofen in its amorphous form was obtained. A preliminary drug release test showed that up to 68% of the loaded ibuprofen could be delivered to a biological medium, confirming the feasibility of using NsZnO as a multifunctional antimicrobial drug carrier.

The frequency of erythromycin resistance in Streptococcus pneumoniae isolates from human specimens, in different Piemonte Region hospitals between 2005-2007, has been studied. Erythromycin-susceptible isolates were 137/198 and erythromycin-resistant 61/198.Among resistant S. pneumoniae isolates 26/61 belonged to constitutive resistance phenotype, 26/61 to M phenotype and 9/61 to inducible resistance phenotype.

The frequency of erythromycin resistance in Streptococcus pyogenes isolated in different Piemonte Region hospitals between January and August 2006 has been studied. The incidence of erythromycin-resistance was 20.2%. Among erythromycin resistant S. pyogenes 13.8% belonged to constitutive resistance phenotype, 5.3% to M phenotype and 1.1% to inducible resistance phenotype.

There is an increased incidence of the morbidity and mortality associated with fungal infections caused by resistant fungi in various groups of patients; therefore the monitoring of their susceptibility to antifungal agents to be necessary for optimizing clinical therapeutic treatment. The susceptibility profiles of recent clinical yeasts and yeast-like fungi isolated from Turin’s Hospitals to current antifungal drugs are here reported. Candida albicans was the most frequently isolated species (40%), followed by C. glabrata (22%).A high rate of susceptibility to all antifungal agents tested was observed and low evidence of resistance was found.