Search

In this work, a multi objective optimization of batch fluidized drying of two pharmaceutical powders (Group A particles and Group B particles) has been performed using desirability function. Optimi...

The present study was designed to evaluate the nutritional composition of melon pulp Maazoun variety, in order to explore its potential attitude as a natural source of nutrients and bioactive molecules. The chemical characterization showed that the pulp was rich in moisture, carbohydrate, dietary fibers, and minerals, as well as carotenoids and phenolic compounds. The chromatographic analysis indicated that amentoflavone (16.14 mg/100 g) and gallic acid (13.56 mg/100 g) were the most abundant phenolic compounds. Melon flesh has an interesting volatile profile in which, mostly esters and alcohols are considered as the key odorants of this appreciated fruit. Melon juice was filtered through crossflow microfiltration that provides more translucent juice and accentuation of yellow color. During clarification process, the permeate flux was reduced by 50% in approximately 40 min. Results proved that the richness of melons in nutrients and bioactive phytochemicals makes them useful as a potential source of antioxidants and suitable as nutraceutical supplements.

A mathematical modeling, based on the two-phase theory of batch fluidized bed drying of type A particles and type B particles pharmaceutical powders, was performed. A perfectly mixed flow bubbling ...

Carob molasses is widely consumed in many Mediterranean countries, including Tunisia where it is known as ‘Rub El Kharroub’. The main objective of the present study was to evaluate the physicochemical properties and biological activities of both commercial and homemade Tunisian carob molasses. The physicochemical characterization revealed that the main parameters (color and HMF concentration) were related to non-enzymatic browning reactions occurring during juice concentration. The phytochemical analysis proved that the presence of bioactive compounds (volatile compounds, phenolic substances and products of non-enzymatic browning reactions) in carob molasses samples justify their biological effects (antioxidant and antibacterial activities). Accordingly, such characteristics may qualify Tunisian carob molasses (both homemade and commercial) as nutritious and healthy food that could be directly consumed or used a functional ingredient in food and pharmaceutical industry.

The aim of this study was to investigate the phytochemical composition and biological properties of Tunisian propolis from four different regions: Kasserine, Béja, Kèf and Monastir. Ethanolic extracts of propolis were prepared using two extraction methods; solvent and ultrasonic extraction. Total phenolics, flavonoids, ABTS free radical and hydroxyl radicals scavenging abilities, anti-inflammatory, anti-hypertensive, as well as antimicrobial activities of propolis extracts were determined. Identification and quantification of phenolic and flavonoid compounds were performed by using both HPLC-UV and HPLC-ESI-MS. The results revealed high contents of total phenolics and flavonoids and polyphenols extraction was more efficient by sonication. Caffeic acid phenethyl ester (CAPE), galangin, and genistein were the major identified compounds. Antihypertensive activity, evaluated in propolis extracts for first time by HPLC-UV, was higher than 90% for all extracts. Tunisian propolis is an important natural source of polyphenols and flavonoids. The best extraction method was ultrasonic for antioxidants and most of biological activities; conventional method seems to be more suitable for anti-inflammatory activity. Propolis from Béja contains the highest amount of antioxidants and have a stronger potential biological activities. Tunisian propolis could be, therefore, a promising raw material for food and pharmaceutical industry.

Background: This study investigated the amino acids, phenolic compounds and volatile compounds in Maazoun melon seeds. The functional properties of melon seed flour, such as bulk density, swelling capacity, emulsifying capacity, and foaming capacity were also determined.; Results: The findings proved that the functional properties of melon seeds make them useful for incorporation into different food formulations to improve their functionality. The determination of the amino acid composition of melon seeds showed that glutamic acid (205.23 g kg-1 ), arginine (130.44 g kg-1 ), and tryptophan (129.91 g kg-1 ) were the major amino acids of the protein fraction. Chromatographic analysis indicated that phenolic acids (47.78%) constituted the main phenolic class, followed by flavonoids (27.15%). Naringenin-7-O-glycoside and gallic acid were the most abundant phenolic compounds. Gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS) analyses of the volatile compounds demonstrated that esters and terpenoids were the main volatile groups. The study of histological structures showed that melon seeds consist of three distinguishable parts: tegument, endosperm cells, and almond.; Conclusion: The results obtained revealed that melon (Cucumis melo L.) seeds may be a potential source of bioactive compounds and natural substances with nutritive value and functional properties of interest to industrial applications. © 2018 Society of Chemical Industry.; © 2018 Society of Chemical Industry.

Microwave power effects (100, 300 and 450 W) on drying kinetics of green peas at an initial 3.06 kg water/kg DM (76.2% wb) was investigated. The density level of microwave power (W/g DM) affected the drying kinetics, bioactive substances and green peas color. The parabolic model was found to be the best in matching the experimental data of green pea drying kinetics. It is well known that microwave drying is mainly due to Darcy's law with the gradient of total pressure as the driving force. Thus, this parameter was used to identify the drying operation as being controlled by effective moisture diffusivity. The values obtained ranged between 1.69 and 5.36 × 10−9 m2/s. The activation energy was determined as 1.38 kW/kg, using the modified Arrhenius equation. Application of high microwave power resulted in decreased L* and b* values, and an increase of a* values. The LC-ESI-MS analysis of peas extracts led to the identification of 7 phenolic acids and 8 flavonoids. Interestingly, peas dried at 100 W had the highest phenolic content as well as the highest DPPH• radical-scavenging activity.

The feather is a valuable protein resource. The feather is the major waste by-product resulting from the poultry processing plants. Therefore, increasing the values of poultry feather waste has a significant effect in the environment. In this study, the physicochemical and functional properties as well as the antioxidant activities of the feather protein hydrolysates (FPHs) obtained by acid hydrolysis after 100 min (FPH100), 200 min (FPH200) and 300 min (FPH300) were investigated. The results showed that FPH100, FPH200 and FPH300 presented high protein content 74.04%, 71.05% and 73.94%, respectively. All FPHs had a good solubility and possessed some interfacial properties, governed by their concentrations. The antioxidant activities of the different FPHs were evaluated using various in vitro antioxidant assays such as 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical-scavenging activity, total antioxidant capacity, reducing power and β-carotene bleaching. FPH100 generally showed a greater antioxidant activity across all the considered methods. The DPPH IC50 of FPH100 values were found to be 0.47 ± 0.011 mg/mL. Moreover, the FPH100 exhibited notable total antioxidant capacity and strong reducing power. Our results suggested that FPHs could be a new potential source for preparing natural antioxidants applied in food, pharmaceutical and cosmetic preparations.

The aim of this work is to establish a comparative investigation of the effect of different drying processes: microwave dehydration (100–600 W), air drying (40–60 °C) and infrared drying (40–60 °C) on drying kinetics and on the main quality attributes (color, total phenols and flavonoids contents, water and oil retention capacities) kinetics’ of lemon (Citrus limon. v. lunari) peels. The experimental drying kinetics’ of lemon peels were fitted to nine thin layer drying models. The Midilli and Kucuk model showed a better fit to experimental drying data for the three drying processes. Microwave drying at 450W preserved the maximum phenols (1.855 ± 0.016 g CAE/100 g DM) and flavonoids (0.802 ± 0.072 g RE/100 g DM) contents respectively. An increase of phenol content was noticed after 9, 13 and 14 min of microwave drying at 600, 450 and 300 W and after 156, 102 and 54 min of infrared drying at 40, 50 and 60 °C. A first-order kinetic model adequately fitted, at the beginning of drying processes, the change of total phenols and flavonoids contents. Total color difference (ΔE) increased progressively with increasing drying time and temperature or microwave power level. ΔE showed a zero-order model whatever the applied drying process. Water retention capacity (WRC) of dried lemon peels decreased during drying processes. However, infrared and microwave drying increased the oil retention capacity (ORC) of lemon peels. The WRC and ORC followed first-order kinetics during air drying and a second order polynomial model during microwave and infrared drying processes.

In this work, the effect of Detente Instantanee Controlee (DIC) (French for instant controlled pressure drop) on the total polyphenol, flavonoids, α-tocopherol contents, and antioxidant activities of olive leaves was studied. Olive leaf extracts were pre-treated at one cycle DIC under 0.1 MPa pressure for 11 s and followed by an extraction with 95% ethanol at 55 °C during 3 h. The phenolic compounds, flavonoids, oleuropein, and α-tocopherol contents were determined, showing 66.63 mg gallic acid equivalent (GAE)/g db, 12 mg catechin equivalent (CE)/g db, 43.9 mg/g db, and 0.15 mg/g db for the untreated leaves against 239.37 mg GAE/g db, 28 mg CE/g db, 70.3 mg/g db, and 0.59 mg/g db for DIC-treated leaves, respectively. Therefore, DIC allows more availability of bioactive compounds contributing to a high antiradical activity (DPPH) compared to a synthetic antioxidant butylated hydroxytoluene (BHT). Both extracts showed a total antioxidant capacity (method of phosphomolybdenum) greater than that of the standard BHT. Likewise, both extracts have a reducing power (FRAP test) significant concentration-dependent. The DIC-treated leaves showed a higher antioxidant capacity compared to that of untreated leaves. Thus, DIC could be an effective treatment to promote the extraction of bioactive molecules of high antioxidant activities from olive leaves.

The present study is conducted to investigate the effect(s) of ultrasonic pretreatment on the extraction of essential oils from dried leaves of lemongrass (Cymbopogon flexuosus) by hydro-distillation. The drying process was carried out within a forced convective dryer at 50 °C and a drying air velocity of 1 m/s. Using a response surface methodology (RSM) based on central composite design with the face centered, the obtained optimum conditions were as follows: an ultrasound pretreatment for 25 min within a power of 250 W, at 50 °C. Modeling showed that all factors (time, power and temperature) were found to be highly significant in the extraction process (p

Studies were conducted on the chemical composition of melon (Cucumis melo L.) seeds, Maazoun variety. Melon seeds were found to contain (on a dry weight basis): moisture (7.16%), oil (30.65%), protein (27.41%), ash (4.83%), carbohydrate (29.96%), fibers (25.32%) and considerable amounts of antioxidant substances as phenolic compounds. The major mineral elements were: potassium, magnesium and calcium. The chemical composition of oil extracted from melon seeds was investigated. The main fatty acids of melon seed oil were linoleic acid and oleic acid. The chromatographic analysis of phenolic compounds showed that flavonoids were the most important group with predominance of amentoflavone (32.80 μg/g). Besides, melon seed oil presented considerable amounts of phytosterols in which β-sitosterol was the major sterol accounting for 206.42 mg/100 g. The seed oil was also found to be rich in tocopherols with a predominance of β+γ-tocopherol fraction. The obtained results revealed that melon seeds presented an alternative source of plant oil which may serve as raw material for food applications.

Leather manufacturing involves a crucial energy-intensive drying stage in the finishing process to remove its residual moisture and generates important heat gradients. The numerical model presented in this study has been developed to describe the drying process of porous medium: bovine leather that undergoes deformation due to shrinkage. The mathematical formulation of fundamental heat, mass and momentum transfers’ phenomena during drying summarizes a two-dimensional model considering elastic behavior of bovine leather. The evolution of moisture content, temperature, and mechanical stresses during drying was discussed. The model was validated with experimental results. Numerical simulations show good agreement with experimental results. The study shows that the elastic model keeps the stress sign at the final stage of drying. The deformations induce tensional stresses near the surface equilibrated by compressive stresses within the product. They reached their maximum for normal stresses equal to 5.97 and 3.52 MPa at around 2145 and 868 s, respectively, for normal stresses along x and y directions and then decrease.

This study was aimed at the determination of bovine leather moisture sorption characteristics using a static gravimetric method at 30, 40, 50, 60 and 70 °C. The curves exhibit type II behaviour according to the BET classification. The sorption isotherms fitting by seven equations shows that GAB model is able to reproduce the equilibrium moisture content evolution with water activity for moisture range varying from 0.02 to 0.83 kg/kg d.b (0.9898

Tunisian carob pods were used to produce molasses and powders, which were then analyzed for their composional and functional properties. Molasses were made from carob juice by boiling until three different concentrations (60, 70 and 80 °Brix), while powders were prepared by microwave drying of the by-product derived from carob molasses processing at three power levels (100, 300 and 600 W). Results showed that the processed carob products exhibited interesting characteristics. Carob molasses were characterized by important reducing sugars content, dark color and functional properties with high antioxidant activity and emulsifying capacity. On the other hand, carob powders were characterized by high levels of dietary fibers, brown color and water/oil retention capacity. This study provides, for the first time, a potential valorization of the carob by-product into powder and highlights some functional properties of carob products required by food industry.

This work deals with the economic valorization of orange industry by-products by intensification of both drying kinetics and extraction of phenolic compounds of orange peel using the instant controlled pressure-drop DIC technology. DIC treatment is usually performed on partially dried samples. It starts with a heating/pressurizing stage for a short thermal treatment time to end by an instant depressurization towards a vacuum. In the present case, orange-peel was DIC-textured to be airflow oven dried at 40 °C, 2 m s−1, and 265 Pa of vapor as relative humidity, to reach a final moisture of about 0.05 g H2O/g db. By assuming this operation as shrinkage-free with conditions of Negligible External Resistance (NER), the Coupled Washing/Diffusion (CWD) was applied as phenomenological drying kinetic model, and its effects were perceptively identified through the starting accessibility (δWs) and the effective diffusivity Deff of water within the textured material. DIC-texturing was also recognized as a pretreatment possibly able to improve the solvent extraction of phenolic compounds. Four phenolic compounds were identified by HPLC assessments; namely hesperidin, rutin, flavone, and naringin. DIC allowed growing them from 12.10 to 65.01 (537%); from 11.47 to 27.10 (236%); from 0.006 to 0.007 (117%); and from 0.0002 to 0.00032 (160%) mg/g db, respectively. This highly significant increase of availability of these active molecules should be correlated with the presence of broken-wall cells, which Scanning electron microscopy (SEM) later, revealed and confirmed.

This study aimed to evaluate the characteristic features, phenolic compounds and thermal analysis of melon seed oil (Maazoun variety), in order to determine its potential applications in food or pharmaceutical industries. The physicochemical properties of the seed oil revealed a high degree of unsaturation. The average contents of carotenoid and chlorophyll were 2.43 mg/kg and 5.70 mg/kg, respectively. The main fatty acids of melon seed oil were linoleic acid (68.98%) and oleic acid (15.84%), which makes this oil nutritionally valuable. Furthermore, trilinolein (LLL), accounted for 28.99% and constitutes the most abundant triacylglycerol. A chromatographic analysis showed that amentoflavone and luteolin-7-glycoside were the major phenolic compounds. A thermal analysis of melon seed oil was performed by differential scanning calorimetery (DSC). The results of sensorial properties indicated that melon seed oil is appreciated by tasters. The findings suggested that because of its composition, melon seed oil could be used successfully as an alternative source in the food and nutraceutical industries as a functional ingredient. El objetivo de este estudio fue la caracterización, evaluación de compuestos fenólicos y el análisis térmico del aceite de semillas de melón (variedad Maazoun), con el fin de conocer sus potenciales aplicaciones en la industria alimentaria o farmacéutica. Las propiedades fisicoquímicas del aceite de semilla mostraron un alto grado de insaturación. El contenido promedio de carotenoides y clorofila fue de 2,43 mg/kg y 5,70 mg/kg, respectivamente. Los principales ácidos grasos del aceite de semilla de melón fueron el linoleico (68,98%) y oleico (15,84%), lo que hace que este aceite sea nutricionalmente valioso. Además, la trilinoleína (LLL) que representó el 28,99% constituye el triacilglicerol más abundante. El análisis cromatográfico mostró que amentoflavona y luteolin-7-glucósido eran los principales compuestos fenólicos. El análisis térmico del aceite de semilla de melón se realizó mediante calorimetría diferencial de barrido (DSC). Los resultados de las propiedades sensoriales indicaron que los catadores aprecian el aceite de semilla de melón. Los hallazgos sugieren que, debido a su composición, el aceite de semilla de melón podría utilizarse con éxito como una fuente alternativa en la industria alimentaria y nutracéutica como ingrediente funcional.

This study focused on the formulation of food products, based on sesame and carob. The possibility of developing blends from sesame paste and carob molasses, using molasses concentrations of 30, 40 and 50%, at 60, 70 and 80°Brix, respectively, has been studied. The blend prepared with 50% carob molasses at 60°Brix was found to be the most acceptable product, according to a sensory acceptability test. Sesame paste, supplemented with carob molasses, was evaluated for physical quality (oil separation, colour and texture) and nutritional composition (moisture, sugar, protein, fat, ash and polyphenols). Physical analysis showed that the addition of carob molasses to sesame paste improved its emulsion stability, changed its colour from beige to brown and modified its texture from fluid to solid. Nutritional analysis proved that mixing sesame paste with carob molasses provided a natural product, characterized by interesting nutritional value (protein: 16.97 g/100 g fry matter, fat: 12.05 g/100 g fry matter and sugar: 9.34 g/100 g fry matter), arising from the constituents of the two ingredients. Thus, the developed blend could offer a promising nutritious and healthy foodstuff to consumers.

Background Proteases are hydrolytic enzymes that catalyze peptide linkage cleavage reactions at the level of proteins and peptides with different degrees of specificity. This group draws the attention of industry. More than one protease in three is a serine protease. Classically, they are active at neutral to alkaline pH. The serine proteases are researched for industrial uses, especially detergents. They are the most commercially available enzyme group in the world market. Overall, fungi produced extracellular proteases, easily separated from mycelium by filtration. Results A new basidiomycete fungus CTM10057, a hyperproducer of a novel protease (10,500 U/mL), was identified as Pleurotus sajor-caju (oyster mushroom). The enzyme, called SPPS, was purified to homogeneity by heat-treatment (80 °C for 20 min) followed by ammonium sulfate precipitation (35–55%)-dialysis, then UNO Q-6 FPLC ion-exchange chromatography and finally HPLC-ZORBAX PSM 300 HPSEC gel filtration chromatography, and submitted to biochemical characterization assays. The molecular mass was estimated to be 65 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), Native-PAGE, casein-zymography, and size exclusion by HPLC. A high homology with mushroom proteases was displayed by the first 26 amino-acid residues of the NH2-terminal aminoacid sequence. Phenylmethanesulfonyl fluoride (PMSF) and diiodopropyl fluorophosphates (DFP) strongly inhibit SPPS, revealing that it is a member of the serine-proteases family. The pH and temperature optima were 9.5 and 70 °C, respectively. Interestingly, SPPS possesses the most elevated hydrolysis level and catalytic efficiency in comparison with SPTC, Flavourzyme® 500 L, and Thermolysin type X proteases. More remarkably, a high tolerance towards organic solvent tolerance was exhibited by SPPS, together with considerable detergent stability compared to the commercial proteases Thermolysin type X and Flavourzyme® 500 L, respectively. Conclusions This proves the excellent proprieties characterizing SPPS, making it a potential candidate for industrial applications especially detergent formulations.

The hyperlipidemia is a serious health problem that increases the risk of many complications including cardiovascular disease. This study aims to evaluate the possible antihyperlipidemic effects of the feather protein hydrolysate (FPH) in a mice fed with a high‐fat diet (HFD)‐fed mice during 5 weeks. The FPH administration improved dose‐dependent lipid profile, as well as the liver and renal dysfunction indices in hyperlipidemic mice. The FPH also restored the antioxidant status in liver, kidney, and heart by lowering the lipid peroxidation and enhancing the antioxidant enzymes (catalase (CAT), glutathione peroxidase (GPx) and superoxide dismutase [SOD]). Moreover, the histological studies proved that FPH administration prevents hepatic steatosis, glomerular hyperfiltration risk, and cardiac muscle hypertrophy. Accordingly, the FPH is a promising novel medicinal ingredient for possible use in the hyperlipidemic treatment and related complications.

Combined osmotic dehydration (sucrose solution: 50–70 % w/w, 30–50 °C for 2 h followed by air drying at 40 and 60 °C) is an appropriate process for preservation of oil retention capacity, lightness and yellowness of lemon peels (Citrus limon. v. lunari). Incorporation of sugars to lemon cuboids pieces increased drying rate during the first falling rate phase of the air dehydration step and improved their color stability. Osmotic dehydration process allows protective effect against further total phenol loss during air drying: significant loss of total phenol content (70–80 %) was recorded during osmotic dehydration and then it remains constant during air drying at 40 and 60 °C. For the investigated temperature of osmotic pre-treatment (30–50 °C), water retention capacities were reduced by up to 70 % and were maintained constant during air drying.

Biological silages were prepared from shrimp head and octopus viscera by-products recuperated from the Tunisian seafood industry. Physical and biochemical changes and microbiological profiles were determined for raw materials during fermentation and on end products. Results showed that biological silage significantly affected (P

The aim of this investigation is to study the impact of the technology of instant controlled pressure drop: “DIC” on the kinetics extraction of olive leaf ( Olea europaea L.) polyphenols. The conditions of extraction were: ethanol 95%, temperature: 55 °C and ratio r = 40 g g −1 dry basis for 3 h. The extraction kinetics of total polyphenols content (TPC) of DIC-treated and untreated leaves were performed according to the method of Folin–Ciocalteau. The ultra-performance liquid chromatography (UPLC) was used to study the extraction kinetics of seven phenolic compounds of olive leaves: apigenin-7-glucoside, hydroxytyrosol, luteolin-7-glucoside, oleuropein, tyrosol, vanillic acid, and verbascoside. DIC-assisted solvent extraction allowed reducing the extraction time from 120 to 15 min while increasing the extracted yields. Phenomenological analysis of extraction kinetics was determined through the two-stage Coupled Washing/Diffusion CWD kinetic model. DIC texturing could, in favorable cases, increase the starting accessibility and systematically the internal effective diffusivity for phenolic compounds.

In this paper, we present a new investigation that allows determining the pore size distribution (PSD) in a porous medium. This PSD is achieved by using the desorption isotherms of four varieties of olive leaves. This is by the means of statistical physics formalism and Kelvin’s law. The results are compared with those obtained with scanning electron microscopy. The effect of temperature on the distribution function of pores has been studied. The influence of each parameter on the PSD is interpreted. A similar function of adsorption energy distribution, AED, is deduced from the PSD.

1-cm strawberry slices were partially airflow-dried at 50 °C, to reach 0.25 g H2O/g db. Optimized DIC treatment was performed at 350 kPa for 10 s. The final drying stage of these DIC-expanded slices was achieved from 0.25 to 0.1 g H2O/g db (dry basis) using intermittent Pulsed Micro-Wave Drying PMWD to prevent from the paradoxical step of coupled conduction heat transfer with deep generation and transfer of vapor. PMWD was defined at constant 100 W for 3.25±0.05 g with constant active time ton maintained at 2 s, and tempering time toff ranged between 2 and 10 s, or with a continuous way. By decreasing both energy consumption and total drying time of DIC-expanded slices using intermittent microwave, the whole cost significantly decreased to be much lower than the conventional MWD drying, with a great increasing of the quality.Keywords: Airflow Drying; Instant Controlled Pressure-Drop DIC; Swell-Drying; Pulsed Micro-Wave Drying; Physical and Chemical Characteristics.

[EN] The present study aims to find the best drying method to minimize the duration of the operation while respecting the nutritional value of the product. Experiments of convective drying and microwave radiation were respectively carried out with a convective dryer (heat temperature: 65 °C and air velocity: 1.3 m/s) and a microwave oven (power level: 100 W and frequency: 2450 MHz). Six coupling tests between the convective drying and microwave radiation were conducted. The only variable condition is the time output of tomatoes from the convective dryer or the microwave oven corresponding to an intermediate mass ratio (IMR) 0.5, 0.4 and 0.3. The microwave drying removes the bound water faster than convective drying. This explains the observed time savings due to convection-microwave and microwave-convection combined drying. The combination of convection drying and microwave drying to an IMR 0.5 preserved better the red color and the antioxidants of the tomato. Thus, the convection–microwave combined drying (IMR 0.5) proved most suitable for preserving the quality of tomatoes., This study was financed by the National Agency for Energy Control in the context of a Federated Research Project.

The two-phase theory has been frequently used to model fluidised bed drying. At high air velocities, a transition from the bubbling regime to the turbulent regime may occur. In this work, we compare a bubbling model and a turbulent model for the simulation of a two pharmaceutical powders drying in a pilot plant and an industrial plant fluidised bed. The bubbling model was based on a discrete variable bubble size. Heat and mass transfer coefficients were based on the Kunii and Levenspiel correlation [1]. Flow regime was supposed to be completely mixed for the emulsion phase. For the turbulent model, the bubble size is not anymore discrete but continuous and bubble phase is less distinguishable than in the bubbling regime. Heat and mass transfer were those proposed by Foka[2]. In addition, the freeboard section was considered since high entrainment is specific of this regime. Gas backmixing was taken into account by considering a plug flow with axial dispersion for the interstitial gas flow. The bubble phase being dilute, was modeled by a plug flow. A plug flow was also considered for the freeboard gas. The solid phase was supposed to be completely mixed. The bubbling regime simulation gave good agreement with experiment in the case of the pilot plant experiment, while the turbulent model better simulated the industrial scale experiment. Key words: batch fluidized bed, pharmaceutical powder, drying, modeling, bubbling, turbulent

The Municipal Solid Waste of Agareb (Sfax –Tunisia), characterized by high organic fraction and moisture contents is the most worrying pollution source that must be managed by innovative treatment and recycling technologies. Bio-drying, as a waste to energy conversion technology, aims at reducing moisture content of this organic matter. This concept, similar to composting, is accomplished by using the heat generated from the microbial degradation of the waste matrix, while forced aeration is used. The purpose of this work was to reduce the moisture content of the waste, by maximizing drying and minimizing organic matter biodegradation, in order to produce a solid recovered fuel with high calorific value.Keywords: Municipal solid wastes; organic matter; biodrying; composting; energy recovery.

To explore the efficiency of xylitol chewing gum enriched or not with remineralizing agents to protect tooth against cariogenic biofilm formation and demineralization. Six groups of chewing gums were prepared; Group 1: isomalt (1.8%), Group 2: casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) (3%) + isomalt (1.8%), Group 3: hydroxyapatite (HAP) (2.5%) + isomalt (1.8%), Group 4: xylitol (1.8%), Group 5: CPP-ACP (3%) + xylitol (1.8%) and Group 6: HAP (2.5%) + xylitol (1.8%). The antibiofilm properties of different chewing gum extracts using seven oral bacterial species including Streptococcus mutans, Streptococcus constellatus, Streptococcus Salivarius and Streptococcus oralis were explored via the crystal violet staining assay. The remineralizing effects of those products were assessed on thirty human permanent teeth, half-protected with varnish before chemical erosion and thermocycling process with chewing gum. Remineralization was evaluated using scanning electron microscopy and microscopic measurements on polarized light microscopy. The ratio R comparing the thickness between unvarnished and varnished sides was evaluated. While the minimum biofilm inhibitory concentration (MBIC50) was low for xylitol alone compared to isomalt, it was inconsistent when enriched with remineralizing agents. The minimum biofilm eradication concentration (MBEC50) was low for xylitol groups compared to isomalt, for all the studied strains. R was significantly lower in Group 1 and Group 2, while Group 6 showed the highest ratio. Xylitol chewing gums confirmed good antibiofilm properties and showed remineralized potential on eroded teeth. When xylitol is associated to CPP-ACP or HAP, antibiofilm activity decreased while remineralization of eroded teeth increased.

Phenolic compounds are secondary plant metabolites which provide defense to plants against oxididizing agents and free radicals.

The MSW is the most worrying pollution source that must be managed by innovative treatment and recycling technologies. Its valorisation is required because of environmental legislation to limit its nuisance and preserve natural resources.

This investigation examines and compares the water sorption isotherms and the thermodynamic properties of two pharmaceutical preparations (Hypril and Azix) intended to be manufactured with the same process plant and equipment. The moisture equilibrium isotherms were determined at 50, 60 and 70 °C using a gravimetric technique. Five isotherm models were explored for their fitting to the experimental data. Azix showed sigmoid type II isotherms while Hypril showed type III isotherms according to the BET classification. All investigated models fitted well the water sorption isotherms of Hypril. By contrast, only GAB and Adam and Shove equations gave appropriate fit to the experimental data of Azix. For both formulations, the isosteric heat and the differential entropy decreased sharply with the increase of equilibrium moisture content to minimum values and thereafter remain constant. In the case of Azix, the integral enthalpy decreased with equilibrium moisture content while the integral entropy increased until reaching a constant value. Contrariwise, Hypril showed decreasing of the integral enthalpy and entropy with the equilibrium moisture content. Keywords: sorption isotherm, enthalpy, entropy, spreading pressure, pharmaceutical formulations

This study investigated the amino acids, phenolic compounds and volatile compounds in Maazoun melon seeds. The functional properties of melon seed flour, such as bulk density, swelling capacity, emulsifying capacity, and foaming capacity were also determined.The findings proved that the functional properties of melon seeds make them useful for incorporation into different food formulations to improve their functionality. The determination of the amino acid composition of melon seeds showed that glutamic acid (205.23 g kgThe results obtained revealed that melon (Cucumis melo L.) seeds may be a potential source of bioactive compounds and natural substances with nutritive value and functional properties of interest to industrial applications. © 2018 Society of Chemical Industry.

In this work, the process of “Detente Instantanee Controlee”: DIC (French for Instant controlled pressure drop) assisted to ethanol solvent extraction of phenolic compounds of olive ( Olea europaea ) leaves was studied. Response surface methodology (RSM) was used to optimize the conditions of solvent extraction carried out on the raw material, as well as the operating parameters DIC texturing taking place as pretreatment; both for getting the highest extraction yields of total phenolic compounds (TPC). The studied parameters were the ethanol concentration in the aqueous solution ( S ), the temperature ( T ) and the liquid/solid ratio ( r ). The maximum yield was 49.84 mg GAE per g of dry raw material, and the optimal conditions were: 95.6% EtOH, 55 °C and 40 ml g −1 dm. Under these optimal solvent extraction conditions of the polyphenols extraction, RSM was also used for optimizing DIC treatment. The total phenolic compounds yield of dry DIC-textured material was higher than that of untreated material with an optimized value of 248.6 mg GAE g −1 at the following conditions: saturated steam pressure: P = 0.1 MPa, number of cycles C = 1 and thermal treatment time t = 11 s. Ultra Performance Liquid Chromatography analysis (UPLC) of the treated and untreated olive leaf extracts revealed that the principal polyphenols were oleuropein, verbascoside, luteolin-7-glucoside and smaller amounts of hydroxytyrosol, apigenin-7-glucoside, tyrosol, vanillic acid and vanillin. Scanning electron microscopy (SEM) showed that, after DIC treatment, there is a change in the structure of olive leaves cells with a destruction of cell walls in comparison with untreated leaves.

The present work examined the effect of air drying conditions on drying kinetics of cactus/brewer's grains mixture fermented with Lactobacillus plantarum HG328248. The drying kinetics was performed in a convective dryer for three air temperatures (40, 50 and 60 °C) and three air velocities (0.7, 1.0 and 1.3 m/s). Four mathematical models were tested to fit the drying curves. The Page model seemed the most appropriate to describe experimental data. The experimental drying curves showed two periods: that at constant rate and that of falling rate. The air temperature was the main factor in controlling the drying rate. The characteristic drying curve equation was determined. The influence of air drying conditions on color, water activity and microbiological quality of the fermented product was also studied. The temperature affected these parameters more significantly than air velocity. All dehydrated products had a satisfactory microbiological quality and consequently could be introduced in ruminant feed.

The sorption isotherms give information about the interaction of biopolymers with water vapor. These isotherms are extremely important in the modeling of the drying processes and in the prediction of the humidity changes during the product storage. An analytical expression for modeling of water vapor sorption isotherms of agricultural products was developed using the statistical physics formalism. The statistical model was further used to fit and interpret desorption isotherms of Tunisian olive leaves and some food products. In this model, five parameters in relation to the desorption process intervene, such as the number of water molecules per site n, the receptor sites density N M , the energetic parameters a 1 and a 2, and the number of multilayers N 2. The fitting results are discussed to explain the behavior of different parameters versus temperature. The statistical model was used to investigate thermodynamics functions that govern in the desorption mechanism, such as entropy, internal energy, and G...

Analytical expression for modeling water adsorption isotherms of food or agricultural products is developed using the statistical mechanics formalism. The model developed in this paper is further used to fit and interpret the isotherms of four varieties of Tunisian olive leaves called “Chemlali, Chemchali, Chetoui and Zarrazi”. The parameters involved in the model such as the number of adsorbed water molecules per site, n , the receptor sites density, N M , and the energetic parameters, a 1 and a 2 , were determined by fitting the experimental adsorption isotherms at temperatures ranging from 303 to 323 K. We interpret the results of fitting. After that, the model is further applied to calculate thermodynamic functions which govern the adsorption mechanism such as entropy, the free enthalpy of Gibbs and the internal energy.

The work was planned to produce dietetic dehydrated strawberries with application of ultrasound osmotic dehydration (UOD) as pretreatment. A Box-Behnken design (BBD) were employed to characterize the UOD strawberry process, optimize and investigate the effect of independent variables like ultrasound time (10, 20 and 30 min), concentration of osmotic solution (distilled water, 32.5 and 65 °Brix) and temperature (20, 30 and 40 °C) on the water loss (WL), solid gain (SG) and weight reduction (WR). The same BBD were used to estimate the main effects of OD without ultrasound treatment. A multi-criteria optimization based on maximal possible values of WL and WR and minimal value of SG was achieved. This was 20.5 min of ultrasound time, 47.5 °Brix osmotic solution concentration and 31 °C medium temperature. The effects of UOD carried out under the optimized operating conditions on kinetics of convective air drying of strawberry at 40, 50 and 60 °C, and velocity of 1 m/s, using the phenomenological model of Coupled Washing/Diffusion (CWD). Starting accessibility, moisture effective diffusivity Deff value and activation energy (Ea) were calculated from similar-Fick’s law and analogous Arrhenius equation, respectively with and without shrinkage correction. Color difference, Chroma and hue angle of fresh and UOD-air dried strawberries were evaluated. Quality attributes were estimated through the assessment of the phenolic content, antioxidant activity, rehydration capacity, and X-ray powder diffraction characteristics.

Poultry feather keratin is the most important by-product from the poultry industry due to its abundance. Different methods have been still applied to process this by-product such as enzymatic hydrolysis which is expensive and inapplicable at the industrial level. This paper presents a study of acid hydrolysis of poultry feathers using different types of acids, sulphuric acid concentration, different temperatures and solid to liquid ratio to obtain a liquid product rich in peptides. The feathers analysis revealed a crude protein content of 88.83%. A maximum peptides production of 676 mg/g was reached using sulphuric acid, 1 molar acid concentration and 50 g/l solid to liquid ratio at a temperature of 90 °C after 300 min. A reaction scheme for protein aggregation and decomposition to polypeptides and amino acids was proposed and a kinetic model for peptides production was developed. The proposed kinetic model proved to be well adapted to the experimental data with R 2 = 0.99.

The aim of this work is to investigate the phytochemical composition and functional properties of the melon peels, considered as a by-product. Melon peels (maazoun cultivar) are rich in nutritional ingredients such as carbohydrates (69.77%) and ash (3.67%). They contain significant amounts of total dietary fibers (41.69%) and antioxidants as polyphenols and flavonoids (332mg/100g extract and 95.46mg/100g extract, respectively). The identification and the quantification of the phenolic compounds of melon peels were performed by high performance liquid chromatography apparatus. The obtained results indicate that hydroxybenzoic acids and flavones constitute their main phenolic classes. 3-Hydroxybenzoic acid is the major phenolic compound in the melon peels by 33.45mg/100g, followed by apigenin-7-glycoside (29.34mg/100g). Determination of the functional properties (water and oil retention capacities) and color shows that melon peels have properties that may be useful in industrial applications.