Search

This study investigated converting abundant paper mill waste, de‐inked paper sludge (DPS), into value‐added medium‐density fiberboard (MDF) panels. The objective was to repurpose this solid waste into a valuable material that aligns with the principles of a circular economy. Previous research has examined the addition of paper sludge to wood composites, but there is limited information on the specific incorporation of DPS into MDF production. This investigation offers new insights into this application. MDF panels were manufactured using hardwood fibers, with varying levels of urea‐formaldehyde resin (10% and 12% by weight) and different loadings of DPS (ranging from 0% to 50% by weight). X‐ray diffraction analysis revealed the presence of defective DPS fiber crystals. Contact angle measurements confirmed that DPS had poor wettability, corresponding to increased water absorption. As more DPS was incorporated, the mechanical properties of the panels progressively weakened due to defective fibers and poor adhesion between the fibers and the matrix. This was evident in scanning electron microscopy micrographs, which showed an escalation in interfacial flaws. Increasing the resin dosage noticeably improved the internal bond strength and reduced moisture uptake across all levels of DPS. However, at a DPS loading of 50%, the properties of the panels deteriorated by 36%–57% compared to the control MDF. Additionally, thickness swelling and water absorption increased significantly with higher DPS content, primarily due to the hydrophilic nature of the fibers. Based on optimization, it was determined that a DPS loading of 20% with a resin content of 12% provided the best balance between performance, waste utilization, cost, and moisture resistance. The reuse of abundant paper sludge supports the goals of a circular economy. However, strategies are required to tailor the processing methods and enable higher levels of recycled material without excessively compromising the key attributes of the product. Further research should focus on enhancing the quality of DPS and its compatibility with wood fibers and resin to enhance the performance of the composite material. Highlights: DPS from recycled paper mill assessed for MDF production with wood fibers and resinIncreasing DPS loading caused reductions in strength and adhesion of panelsWater absorption and thickness swelling markedly rose with more DPS additionIt was attributed to hydrophilic fibers and disrupted fiber‐matrix bondingOptimal formulation was 20% DPS loading and 12% resin content, balancing performance, waste utilization, and cost. [ABSTRACT FROM AUTHOR]

Paper sludge consists mainly of wet short cellulose fibers that are lost during papermaking and of residual chemicals used in the manufacturing process that remain dissolved in the water. Each ton of paper generates about 40–50 kg of dry sludge, of which 70% is primary sludge. Paper production, which exceeded 400 million tons globally in 2020, generates vast volumes of solid waste. Primary sludge is usually fiber-rich and hence suitable to be recycled back into the papermaking process. However, if the sludge is to be disposed of in landfills, sustainable practices must be developed in order to recover the fibers as they are valuable source for manufacturing high value-added products. This study investigates the valorization of paper sludge discarded by a filter paper manufacturer, with the purpose of producing cellulose acetate films for food packaging. The process involves recovering cellulose fibers from the sludge, purifying them and through acetylation reaction produce cellulose acetate films. FTIR spectra confirmed successful acetylation of fibers and also that acetyl groups reduced the hydrophilicity of cellulose—the contact angle was increased to over 80° from 50° in native cellulose. The films exhibited very good water barrier properties at both 50% and 90% relative humidity (RH). [ABSTRACT FROM AUTHOR]

Sea purslane (Sesuvium portulacastrum) was cultivated for two 90-day sequences at two spacings, and with various soil amendments, to evaluate its potential to arrest the increase in soil salinity and sodicity associated with irrigation using paper- and pulp-mill effluent. Its phytodesalination capacity (PDC) with respect to Na ranged from 162 to 226 kg/ha in the first sequence and 167 to 250 kg/ha in the second sequence; the PDC is reliable even under drought stress. Addition of amendments, in particular pressmud compost, increased the average Na+ uptake by 38%, leading to the highest PDC of 250 kg/ha for a single crop sequence. [ABSTRACT FROM AUTHOR]

This study evaluates the impact of sales promotions that are featured in store flyers distributed by prominent retailers and their capacity to attract consumers to their establishments. A distinctive conceptual framework is introduced that scrutinizes the influence of ethically-minded consumer behavior, digital citizenship/literacy, and a retailer's orientation toward environmental sustainability and explicit ecological concerns. A quasi-experimental design was used to formulate four distinct scenarios from a possible set of eight, stemming from the combinations of three variables: 2 Retailer Positioning (green vs. without explicit ecological claims) × 2 Flyer Mediums (paper vs. digital) × 2 Discount Levels (5% discount vs. 30% discount). Through an online survey, a sample of 269 responses was garnered to gauge consumer reactions to these store flyers, evaluating their attitudes and receptiveness. The findings suggest that attitudes toward paper flyers were more favorable when presented by non-green retailers compared to their green counterparts. This can be attributed to a perceived inconsistency between a green brand positioning and the use of paper flyers. Furthermore, the propensity to transition to digital flyers was notably stronger for green retailers compared to non-green retailers, but this inclination was most pronounced when higher discounts were offered. [ABSTRACT FROM AUTHOR]

Due to the high wastepaper recyclability and water-loop system closure, packaging paper mills struggle with increased fines, causing runnability issues. Cellulase enzymes are a preferred treatment choice for the improvement of the pulp refining in stock preparation area but are not widely used or easy to introduce in the production process. Different cellulase enzymes were tested, and those with the highest activity were introduced to the white-water (WW) samples with the aim to reduce fines content as potentially new enzyme applications on the paper machine. The first portion of the study involved the development of an experiment model to find and confirm the optimal enzyme process parameters (40 °C, pH 5.7, reaction time 3 h, and 0.18%v/v enzyme addition) for laboratory made white-water. The second portion of the study included turbidity, colloidal charge, flow cytometry (FCM), and chemical oxygen demand (COD) analysis on industrial and laboratory made white-water samples at optimized process parameters. Obtained results corresponded to reduced fines content in white-water samples, which justified commercial usage of cellulase enzymes on recycled paper machine short loop and potentially increased machine runnability without negative influence on wastewater treatment plant. [ABSTRACT FROM AUTHOR]

The fast growth of building constructions industry and of the universal population is the main cause of increase in global energy consumption. Therefore, the improvement of the building envelope encourages the scientific community to investigate the use of alternative materials that assure indoor comfort conditions and at the same time promote the reduction of energy consumption by adopting energy saving strategies in the manufacturing process. The present research contribution aims to focus on the potential use of innovative building materials developed with waste paper, classified as urban non-hazardous discard component. The use of paper pulp originated from recycled paper and cardboard with the addition of textile fibers from industrial by-products was explored. Here, an effort has been made to realize sustainable insulating panel for internal use, considering different mix design and recycled components in various percentages. The research focuses on hygric, thermal, and physical performances of recycled waste based panels, measuring physical aspects as bulk porosity and bulk density and testing hygrothermal performances as the dry-state thermal conductivity, thermal diffusivity, volumetric heat capacity, and water vapour permeability. Furthermore, in order to assess the hygrothermal behaviour of the building envelope, a numerical simulation, carried out by WUFI® Plus in a Mediterranean context, was developed using as inputs the results collected from the measurement campaign in laboratory. [ABSTRACT FROM AUTHOR]

This study delves into the dynamic evolution of solids content in a pilot-scale through air drying tissue machine, aiming to enhance comprehension and refine optimization strategies for tissue manufacturing. It focuses on development of solids content throughout the process. Analyzing the interaction between process parameters and solids content provides deeper insights into water removal dynamics. The research employs solid contents monitoring techniques in pilot scale, offering a detailed view of solids content evolution from the wet web's inception to the final tissue product. It significantly highlights the impact of key parameters, particularly pulp refining, on solids content across all positions of the pilot machine. Additionally, the study emphasizes the influence of vacuum system configurations, identifying the relationship between energy expended in the vacuum system and evaporation energy. Furthermore, the results indicate that compression and air displacement dewatering in vacuum boxes are less speed-sensitive compared to heat-driven evaporation in the TAD- and Yankee cylinders. Solid contents at all positions in the tissue machine correlates between various dewatering elements. Optimizing site-specific dewatering and evaporation strategies can potentially save drying energy in the Yankee drying phase which hold promise for enhanced energy and resource utilization, aligning with demands for sustainable manufacturing practices. [ABSTRACT FROM AUTHOR]

It is well-known that energy consumption is increasing around the world on a daily basis. In the construction sector, a highly effective solution for reducing energy consumption involves exploring both modern and traditional buildings designed to adapt to climate changes. One promising approach is to use paper waste and bio-sourced materials as the basis for insulation. The purpose of this study was to improve the sustainability of buildings by using recycled waste materials that have a positive impact on the environment, people, and the economy. A novel insulating material composed of recycled paper waste and Ampelodesmos mauritanicus leaves and fibers was developed and used in non-load-bearing elements. The paper waste was transformed into pulp and mixed with the bio-sourced materials to create a composite material that exhibits excellent insulation properties. The resulting material is lightweight, durable, and cost-effective. Furthermore, different mechanical and thermal analyses were performed on specimens with varying dosage ratios. The results showed that the developed material has good thermal insulation, with a value of 0.027 W/m.K. [ABSTRACT FROM AUTHOR]

The article focuses on the imminent transformation of the packaging industry towards paper-based alternatives due to increasing environmental concerns regarding plastic packaging. Topics include major brands leading the shift towards sustainability by adopting paper packaging solutions and innovative technology companies developing eco-friendly packaging alternatives.

Stone paper is a relatively sustainable alternative to traditional fibre-based paper. Stone paper is made using resin such as high-density polyethylene (HDPE) and a mineral such calcium carbonate (CaCO3). Plasticizers, bulking agents, coupling reagents, dispersing agents, and inorganic fillers are added in the stone paper formulation for imparting different properties. However, the HDPE, used in stone paper formulation, is not biodegradable and can be replaced with biodegradable polymers to make stone paper more environment friendly. The biodegradable stone paper can be easily made using relatively cheaper blown film process. The stone paper can also be made from CaCO3 waste of traditional paper industry and recycled polymer waste. This review paper provides overview about the stone paper, the biodegradable polymeric materials which can be used instead of HDPE, information about the converting processes for stone paper; it's applications and comparison to the traditional paper. [ABSTRACT FROM AUTHOR]

The aim of this article is to explore up to seven parameters related to the methodological quality and reproducibility of thematic bibliometric research published in the two most productive journals in bibliometrics, Sustainability (a journal outside the discipline) and Scientometrics, the flagship journal in the field. The study identifies the need for developing tailored tools for improving the quality of thematic bibliometric analyses, and presents a framework that can guide the development of such tools. A total of 508 papers are analysed, 77% of Sustainability, and 23% published in Scientometrics, for the 2019-2021 period. An average of 2.6 shortcomings per paper was found for the whole sample, with an almost identical number of flaws in both journals. Sustainability has more flaws than Scientometrics in four of the seven parameters studied, while Scientometrics has more shortcomings in the remaining three variables. The first limitation of this work is that it is a study of two scientific journals, so the results cannot be directly extrapolated to the set of thematic bibliometric analyses published in journals from all fields. We propose the adoption of protocols, guidelines, and other similar tools, adapted to bibliometric practice, which could increase the thoroughness, transparency, and reproducibility of this type of research. These results show considerable room for improvement in terms of the adequate use and breakdown of methodological procedures in thematic bibliometric research, both in journals in the Information Science area and journals outside the discipline. [ABSTRACT FROM AUTHOR]

As the tragedy in Ukraine deepens, it's clear that the world should end its dependency on Russian oil. It will be ironic, however, if nations disentangling themselves from this compromised energy source instead turn to another energy source with destructive impacts: harvesting and burning forest wood for fuel, which increases carbon emissions compared to fossil fuels, and degrades forests. [ABSTRACT FROM AUTHOR]

Packaging waste makes up more than 10% of the landfilled waste in the United States. While consumers often want to make environmentally friendly product choices, we find that their perceptions of the environmental friendliness of product packaging may systematically deviate from its objective environmental friendliness. Eight studies (N = 4,103) document the perceived environmental friendliness (PEF) bias whereby consumers judge plastic packaging with additional paper to be more environmentally friendly than identical plastic packaging without the paper. The PEF bias is driven by consumers' "paper = good, plastic = bad" beliefs and by proportional reasoning, wherein packaging with a greater paper-to-plastic proportion is judged as more environmentally friendly. We further show that the PEF bias impacts consumers' willingness to pay and product choice. Importantly, this bias can be mitigated by a "minimal packaging sticker" intervention, which increases the environmental friendliness perceptions of plastic-only packaging, rendering plastic-packaged products to be preferable to their plastic-plus-paper-packaged counterparts. This research contributes to the packaging literature in marketing and to research on sustainability while offering practical implications for managers and public policy officials. [ABSTRACT FROM AUTHOR]

Introduction: Over the last decade, the emergence and spread of personalized medicine (PM) have defined a substantial revolution in healthcare. In principle, healthcare system sustainability is challenged by the investments required for research and development, as well as the adoption of PM techniques in routine clinical care. The "Integrating China in the International Consortium for Personalized Medicine" (IC2PerMed) EU-funded project aims to integrate China into the "International Consortium for Personalized Medicine" (ICPerMed). IC2PerMed aims to align the EU and China's research agendas in this field to enable a swift development of approaches in the EU and China with strong leverage upon EU-Chinese collaborations. Methods: Within this project, we first mapped relevant policies on PM in both the EU and China, and then we involved European and Chinese experts in PM in workshops and Delphi surveys in order to identify relevant priorities for the implementation of PM in sustainable healthcare. Results: As a result of this process, we identified nine overarching priorities, each addressing specific aspects of the sustainability of healthcare systems and PM implementation, with the main goal of supporting policymakers in integrating PM approaches in the EU and China. Discussion/conclusion: The implementation of PM in health systems is appealing in terms of improved accuracy in diagnostics, treatment, and prevention of disease, as well as reduction of the side effects resulting from inefficient use of drugs. Research, development, and implementation of needed techniques require time and resources that can slow the adoption of PM in healthcare systems. The nine priorities we identified address some of the most critical points, trying to lay the foundations for a comprehensive approach. [ABSTRACT FROM AUTHOR]

The sustainable management of residual waste streams generated from the pulp and paper industry (PPI) has garnered increasing concerns due to the energy crisis and the pressing environmental threats posed by substantial effluent discharges. Using renewable lignocellulosic waste for resource generation presents a revolutionary approach to achieve environmental sustainability. Integrating the PPI with biorefinery processes allows for diversification beyond paper production and facilitates resource recovery. This review critically evaluates the valorization of waste streams from the PPI, with a pronounced emphasis on expanding into bioenergy and biofuels production, while also fostering the development of innovative biomaterials, such as biochar and activated carbon for applications with high added-value, such as environmental remediation and supercapacitors development, thus ensuring long-term sustainability. The review also emphasizes the significance of adopting a circular economy and its role in achieving environmental sustainability, with a particular emphasis on thermochemical technologies, which hold promise for resource recovery from wastewater. Furthermore, the review identifies critical bottlenecks in the path of waste stream valorization and engages in a forward-looking discussion on future prospects within the PPI. [Display omitted] • Black liquor contains major inhibitors e.g., furfural, 5-hydroxymethylfurfural. • Black liquor is used as a low-cost sugar, to produce e.g., bioethanol, biobutanol. • Paper mill wastewater used e.g., graphene sheet development, biochar, carbon fuel cell. • Porous carbon by black liquor showed capacitances for supercapacitor electrode. • Integrated biorefineries can achieve sustainability by Kraft pulp conversion. [ABSTRACT FROM AUTHOR]

Recycling every viable material to produce new value-added products not only reduces waste, but also provides an opportunity to create sustainable and innovative solutions while preserving our natural resources. With this motivation, electrically conductive one-dimensional carbon fibers and two-dimensional aluminum flakes reinforced cellulose matrix composite papers were manufactured using recycled materials with a scalable, eco-friendly, and low-cost papermaking process. The designed composite paper showed 36.1 dB electromagnetic interference shielding efficiency (EMSE) with an absorbance-dominated performance by absorbing 98.85% of electromagnetic waves. An efficient impedance matching was obtained on the composite paper surface using reinforcements with different morphologies. Cellulose paper samples were converted to electrically conductive composites (0.415 S/cm), and the electrical conductivity was altered by tailoring the reinforcement ratios. Thermo-mechanical test results revealed that the cellulose matrix's storage modulus was increased from 1.44 to 2.1 GPa with a 46.5% improvement. The composite cellulose paper represented increased hydrophilicity with higher porosity. The environmentally friendly composite paper responses to the escalating environmental worries and possesses a tremendous possibility of being utilized as an electromagnetic shielding material. [ABSTRACT FROM AUTHOR]

The pulp and paper industry is recognized as a well-established sector, which throughout its process, generates a vast amount of waste streams with the capacity to be valorized. Typically, these residues are burned for energy purposes, but their use as substrates for biological processes could be a more efficient and sustainable alternative. With this aim, it is essential to identify and characterize each type of waste to determine its biotechnological potential. In this context, this research highlights possible alternatives with lower environmental impact and higher revenues. The bio-based pathway should be a promising alternative for the valorization of pulp and paper industry wastes, in particular for bioproduct production such as bioethanol, polyhydroxyalkanoates (PHA), and biogas. This article focuses on state of the art regarding the identification and characterization of these wastes, their main applied deconstruction technologies and the valorization pathways reported for the production of the abovementioned bioproducts. [ABSTRACT FROM AUTHOR]

Synergy in the co-processing of lignocellulosic wastes and municipal biowaste (MB) can unlock their potential for biobutanol production. This study assessed the potential for biobutanol production through the co-processing of lignocellulosic waste and MB. Specifically, it compared the co-processing of paper waste with MB to that of garden waste and MB. Ethanol organosolv pretreatment served as a dual-function process for both pretreatment and detoxification purposes. Initial fermentation of hydrolysates from untreated paper waste using Clostridium acetobutylicum produced 0.9 g/L of acetone and ethanol but no detectable butanol. Organosolv pretreatment led to a significant increase in acetone and ethanol production but did not yield butanol. Co-processing paper waste with MB using organosolv pretreatment resulted in the production of 2.8–3.2 g/L butanol, along with increased acetone and ethanol production. Furthermore, co-processing a 1:1 (w/w) mixture of paper waste and MB under mild and severe pretreatment conditions produced 45.5 g and 43.4 g butanol, respectively, compared to 34.8 g and 14.4 g butanol when processing these waste streams separately. The study also explored the positive impact of co-processing garden waste with MB, a distinct lignocellulosic source, enhancing acetone-butanol-ethanol (ABE) yield by 27–40%. These findings highlight the potential of synergistic waste co-processing for achieving a more suitable balance of nutrients to enhance biobutanol and ABE production from biowastes. Additionally, the simultaneous treatment of lignocellulosic waste and municipal biowaste offers a simplified approach to waste processing, contributing to advancements in sustainable biomass utilization and bioenergy production. [Display omitted] • The fermentation of the paper-derived hydrolysates led to acetone but not butanol. • Co-processing with municipal biowaste led to butanol production from paper waste. • The synergy of co-processing and organosolv pretreatment led to higher ABE yields. • The pretreatment positively affected the starch release and cellulose hydrolysis. • Ethanol is a byproduct used as a pretreatment agent to help process circularity. [ABSTRACT FROM AUTHOR]

"Sustainability Matters: Prospects for a Just Transition in Calgary, Canada's Petro-City" is a book by Noel Keough and Geoff Ghitter that explores various issues related to sustainability in the city of Calgary, Alberta, Canada. The authors cover topics such as urban planning, transportation, energy, equity, diversity, and governance. The book argues that Calgary's growth and development have been driven by land developers and business interests, resulting in a large ecological footprint and an unsustainable city. The authors propose solutions and draw on examples from other cities to increase sustainability in Calgary. However, the book lacks discussion on how to build political support for these proposals and appeal to a broader range of political values. [Extracted from the article]

[Display omitted] • The alcohol yields achieved were 41.3 wt% and 48.5 wt% from the corrugated box and A4 paper. • Cellulose exhibited the conversion rate of 100 %, with alcohol substances achieving a yield of 71.2 wt% and a selectivity of 89.4 % within 6 h. • The mechanism of cellulose hydrolysis and the catalytic effect of CuMgAlO x were explored. • Multiple techniques were utilized to analyze the alcoholysis pathways and mechanisms of cellulose in waste paper. In an effort to valorize under-exploited cellulose sources like waste paper for sustainable energy production, this study investigates a catalytic process to convert these materials into low-carbon alcohols. We explored the conversion efficiency of various cellulose materials, including corrugated box, A4 paper, and pure cellulose, under the influence of a CuMgAlO x catalyst. Our findings indicate that at 360 °C for 6 h, the conversion rates were substantial, yielding 70.1 % for corrugated box, 85.2 % for A4 paper, and 100 % for cellulose. The respective alcohol selectivities achieved were 54.7 %, 83.0 %, and 89.4 %, with alcohol yields of 41.3 wt%, 48.5 wt%, and 71.2 wt%. Notably, the absence of the catalyst led predominantly to the production of sugars and lipids, whereas the catalytic conditions facilitated the formation of alcohols. The study also examined the effects of temperature and reaction time on cellulose conversion. It was found that a complete conversion was possible at 320 °C within 1 h, with extended temperature and time improving the alcohol yield. The development of a kinetic model for the cellulose conversion process has allowed for accurate predictions of the transformations under varied conditions, which offers a strategic framework for reaction optimization. Furthermore, the role of the CuMgAlO x catalyst was elucidated through the examination of model compounds, demonstrating its capability in converting cellulose intermediates such as sugars, lipids, and ketones into alcohols. This research highlights a potent strategy for the production of high-value, eco-friendly green fuels from readily available paper products and cellulose biomass, marking a significant advancement in chemical engineering and sustainable energy resources. [ABSTRACT FROM AUTHOR]

The conversion of ubiquitous hygrothermal resources into renewable energy offers significant potential for cable‐free, self‐powered systems that can operate worldwide without regard to climatic or geographic limitations. Here, an all‐printed flexible hygro‐thermoelectric paper generator is demonstrated that uses bifunctional mobile ions and electrons to make the moist‐diffusion effect, the Soret effect, and the Seebeck effect work synergistically. In the ordinary hygrothermal settings, it generates an unconventional hygro‐thermoelectric output pattern and shows almost a dozen‐fold increase in positive hygro‐thermopower of 26.70 mV K−1 and also another negative hygro‐thermopower of −15.71 mV K−1 compared to pure thermopower. A single paper generator can produce a giant 680 mV displaying typical cyclic sinusoidal waveform characters with volt‐sized amplitudes. The ion‐electron conductive ink is easily printable and consists primarily of a Bi2Te3/PEDOT:PSS thermoelectric matrix modulated with a hygroscopic glycerol that releases ion charges for moist‐diffusion effect and Soret effect, as well as electron charges for Seebeck effect. The emerged hygro‐thermoelectric harvesting strategy from surrounding hygrothermal resources offers a revolutionary approach to the next generation of hybrid energy with cost‐efficiency, flexibility, and sustainability, and also enables large‐scale roll‐to‐roll production. [ABSTRACT FROM AUTHOR]

Bats have long been recognized as important pest controllers. However, there are no studies evaluating the potential of bats in predating insect pests of Eucalyptus trees, one of the most planted trees worldwide. We evaluated the predation of 3 worldwide spread Eucalyptus pest, Ctenarytaina spatulata, C. eucalypti and Gonipterus platensis, in Portugal, and also the former main pest biological control agent, the parasitoid Anaphes nitens. We used molecular methods to identify 10 bat species from 356 droppings and used a specific PCR assay to detect the 4 target insects. We detected C. eucalypti in 3 droppings, C. spatulata in 4, G. platensis in 1, and none with A. nitens. Our results indicate that bats can potentially act as suppressing agents of the novel exotic prey in eucalypt plantations, but their importance seems low, likely as a result of their low use of eucalypt plantations as foraging grounds. Managing plantations to attract bats, would not only help in bat conservation, but could also increase natural pest control of eucalypt pests, leading to more sustainable forestry practices. [ABSTRACT FROM AUTHOR]

Environmental sustainability is a huge challenge in Africa as the region is currently struggling to provide sustainable systems to support daily human activities. Such activities in many African organisations include paper‐based information storage and communication which are not ecofriendly and place a huge burden on forest resources. This study therefore focused on the implication of overusing paper in an African university. Fifty offices in the university were surveyed and 59 questionnaires administered. The questionnaires were transcribed and analysed using both textual qualitative and quantitative analyses. The results showed that 6888 reams of paper (costing about 8 million Naira) are consumed annually by the university, translating to about 413 trees, which are enough to occupy a standard‐sized football pitch. It was also found that administrative staff members were generally Information Communication Technology (ICT) certified; however, many of them are still not well‐informed on the environmental implication of overconsuming paper even though they are largely aware of the benefits of paperless systems. Recommendations were offered on how to reduce the demand for paper by the university. This study is expected to create more awareness on the urgent need for African organisations to take environmental sustainability issues more seriously. [ABSTRACT FROM AUTHOR]

[Display omitted] • Office paper waste is processed using physiochemical and enzymatic hydrolysis. • The yeast is isolated from rotten banana for the fermentation process. • Box-Behnken analysis was used to determine optimal conditions for key variables. • A blended membrane was applied for the purification process. • Amicon cell and polymeric membrane dehydrate ethanol–water combinations. One potential replacement for fossil fuels is the generation of biofuel from biomass feedstock. To reach the global sustainability goals, it is also necessary to address a number of issues, such as reducing environmental pollution, climate change, and carbon emissions. This work was aimed to convert the office paper waste as biomass feedstock into bioethanol through a sustainable pathway. The office paper waste was hydrolyzed via physiochemical and enzymatic hydrolysis, the liberated glucose was estimated at 15.72 g/L using the optimum conditions of 15 % HCl and 6 % office paper waste followed by enzymatic hydrolysis. The yeast isolate B2 that was applied for the fermentation process was isolated from rotten banana, identified as Hanseniaspora uvarum (STDF-B2) and submitted to GenBank with accession number (OP800106). The Box-Behnken design was applied to estimate the optimal conditions for the three most significant variables depending on the one variable at a time results. A blended membrane of sulphonated polyvinyl chloride with poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (SPVC-PAMPS) was applied for the purification of both standard ethanol and produced bioethanol via pervaporation technique (PV). The morphology, chemical composition, mechanical properties and permeability of the membrane were all analyzed in various ways. Following purification using a membrane-integrated amicon cell, the total permeate flows of the laboratory-prepared ethanol and generated bioethanol were 289.54 and 253.06 (g/m2 h), respectively. [ABSTRACT FROM AUTHOR]

In this study, a microstrip patch antenna design with a U-shaped patch and a paper-based substrate is presented. Metallic parts such as the patch, ground plane and microstrip line feed are designed in aluminum. Utilization of recyclable paper and aluminum yields a sustainable and environmentally friendly design. The dual-band antenna operates between 1.950-2.125 GHz and 2.650-2.825 GHz with a bandwidth of 0.175 GHz for both frequency ranges. It is suitable for multipoint distribution systems (2.076-2.111 GHz) and WiMAX application (2.700--2.800 GHz). Monopolar radiation patterns are obtained for the operation frequencies of both frequency ranges. Maximum gain values are 5.009 dBi and 5.413 dBi for the operation frequencies of multipoint distribution systems and WiMAX application, respectively. While the antenna can be used indoors and outdoors, radome design is not considered in the structure. No parasitic elements or slots are included in the antenna. All simulations are carried out by using ANSYS HFSS software package. [ABSTRACT FROM AUTHOR]

Climate change and the resulting higher frequency of extreme weather events have a direct negative impact on mental health. Natural disasters are particularly associated with an increase in the prevalence of depression, anxiety and posttraumatic stress disorder. Indirect consequences of climate change, such as food shortages, economic crises, violent conflicts and forced migration, additionally represent severe psychological risk and stress factors. Climate anxiety and solastalgia, the distress induced by environmental change, are new psychological syndromes in the face of the existential threat posed by the climate crisis. Accordingly, a sustainable psychiatry must prepare for increasing and changing demands. The principles of psychiatric treatment need to focus more on prevention to reduce the overall burden on the healthcare system. Waste of resources and CO2 emissions in psychiatric treatment processes as well as infrastructure must be perceived and prevented. Psychiatric education, training and continuing education concepts should be expanded to include the topic of climate change in order to comprehensively inform and sensitize professionals, those affected and the public and to encourage climate-friendly and health-promoting behavior. More in-depth research is needed on the impact of climate change on mental health. The DGPPN becomes a sponsor and aims for climate neutrality by 2030 by committing to climate-friendly and energy-saving measures in the area of finance, in relation to the DGPPN congress as well as the DGPPN office. [ABSTRACT FROM AUTHOR]

While paper as a medium of information is declining in demand, paper as a sustainable alternative to plastic packaging is gaining interest. In light of these changes, the paper industry is seeking new growth by developing highly-functional paper material that can replace plastics. To this end, the industry needs to develop paper with high-barrier and strength properties, as well as technologies that can improve recyclability of such material. Beyond paper, the industry is also developing novel wood-based chemicals that can replace traditional fossil-fuel derivatives. For these to become commercially viable, the industry needs to focus on achieving cost-competitiveness. Finally to reinforce these two initiatives, the government needs to engage in active dialogues with the industry leaders and provide related R&D support. [ABSTRACT FROM AUTHOR]

Paper-based analytical devices (PADs) enable the affordable, easy, rapid, and reliable detection of a range of analytes at the point-of-care. Cellulose is a versatile substrate for antibody attachment. However, how immunoreagents are immobilized onto cellulose plays an important role in assay performance. To provide an overview of the different antibody immobilization strategies used for developing PADs, we here critically review the existing literature from the last decade (2013–2023). First, we introduce cellulose as a substrate and summarize the different fabrication techniques for developing PADs. Thereafter, we delve into how antibodies are immobilized onto cellulose passively, covalently, or by affinity linkage. Affinity-based immobilization is further explored in a case study focused on using recombinant bifunctional proteins with cellulose-binding modules to anchor immunoreagents to cellulose. The final section discusses the validation and sustainable development of PADs addressing the existing and future challenges associated with developing such devices. [Display omitted] • Strategies for antibody immobilization onto cellulose substrates are reviewed. • Immobilizing antibodies in a site-selective manner improves analytical performance. • Cellulose requires modification before antibodies can be covalently attached to it. • Cellulose-binding modules facilitate antibody attachment onto unmodified cellulose. • Future challenges of developing sustainable paper-based immunoassays are discussed. [ABSTRACT FROM AUTHOR]

This paper presents manufacture and testing of paper boards made from recycled paper pulp. The aim was to create material for creating paper boards which could be used in furniture design with various shapes. The used types of pulp were deinked pulp (DIP) and old corrugated cardboards (OCC). Several test pieces - paper boards were made with different combinations of materials and its mechanical and physical properties were tested. The used glue for each material was urea formaldehyde glue and starch in combination with glucose. The tests which were done were determination of density and density profile (EN 323:2005), moisture content (EN 322:2005), modulus of elasticity in bending and bending strength (EN 310:1993), thickness swelling and water absorption (EN317:2005), internal bond (EN 319:2005) and screw withdrawal resistance (EN 320:2011). The aim was to create material for creating boards which could be used in furniture design with various shapes. The result of this paper shows possible material combinations which could be used for furniture parts. Paper boards will be used for table top of side table in following steps. [ABSTRACT FROM AUTHOR]

The article offers information on historic Austrian paper mill Mondi Neusiedler is the heart of research, development and production of innovative and green uncoated papers for graphic arts professionals. Topics include the Austrian paper mill Neusiedler AG was producing paper for dry toner machines in 1967, and Neusiedler has continued its path as an independent paper mill and establishing itself as Europe's largest quality office paper manufacturer.

The article presents the discussion on COVID-19 pandemic highlighting the contributions critical care. Topics include intensive care units (ICUs) around the world suddenly inundated with patients who were critically ill from an unknown virus, along with all the other patients needing critical care services; and warrants consideration of energy, clinical supplies, pharmaceuticals, technical equipment and physical facilities.

Paper is an excellent medium of expression and knowledge preservation and communication because of its writing, printing, and packaging abilities. It is a thin sheet or web-like structure made by a dilute suspension of cellulosic fibres. Handmade papermaking technology was mass accepted and considered a precious commodity before development of an industrialised wood- pulp based paper industry. This modern papermaking practice harms the environment as it uses enhanced natural resources (ample amount of water, trees as a primary source for wood pulp) and generates pollution due to release of harsh chemicals. This paper reviews the history and process of handmade paper manufacturing from past to present. Along with that, all the pillars of sustainability (environmental, economic, and social) in relation to the handmade paper industry are deep rooted since ancient times and very much relevant for the present era of sustainable development. Various kinds of cellulosic raw materials from plants (Paper mulberry, Kazo, Gampy, hemp, bamboo, banana, etc.) and other used materials (old rags, ropes, nets, newspapers etc.) with the chemical-free production process and products make this industry eco-friendly. Craft based, small scale and labour-intensive guild art gives it social strength; whereas an infinite product range having functional and decorative uses, as well as strong export potential of the industry gives it an economic strength. Due to the present need of sustainable production, waste minimisation, and circular economy, the handmade paper seems to very potential industry to recycle various kind of waste like weedy battles, textiles, tetra packs, currency, plastic etc. This paper is an attempt to review the journey of handmade papers, its recycling potential, various production processes, products, advantages and disadvantages of the industry from past to present. [ABSTRACT FROM AUTHOR]

The landfilling of paper mill sludge (PMS) has been restricted or even banned in many countries due to the raised concern about greenhouse gas (GHG) emissions and contamination of the soil and water, calling for a sustainable PMS management approach. The potential valorization of PMS to nanomaterials combined with traditional biorefinery was examined in this work. Three types of PMS-derived cellulose nanofibrils (CNFs) were prepared and evaluated: enzymatically assisted CNF (AU: with in-house produced enzyme and CT: with commercial enzyme), mechanically pretreated CNF (BT), and chemically pretreated CNF by TEMPO oxidation (TEMPO). It was found that enzyme-assisted mechanical fibrillation-derived CNFs had a comparable average diameter (27.9 nm for AU and 22.7 nm for CT) with that produced from mechanical pretreatment (26.5 nm for BT) and TEMPO oxidation pretreatment (20.0 nm for TEMPO), and they showed the best drainage properties among the three types of CNF. The CNFs resulting from enzymatic pretreatment reduced 15% of energy consumption compared to the mechanical method and had better thermostability than TEMPO oxidation method. In addition, the on-site produced enzyme showed similar performance to the commercial enzymes towards the CNF properties. These findings provide new insights into a promising integrated strategy in engineering CNF from PMS with on-site enzyme production as a novel and sustainable approach for PMS management and valorization. [Display omitted] • A novel and integrated biorefinery strategy was developed for enzyme hydrolysis-assisted CNF fabrication. • The in-house enzyme was comparable to the commercial enzyme in CNF preparation. • The CNF prepared by enzyme was compared with that using mechanical and chemical pretreatment. • The enzyme-hydrolysis-assisted CNF had the best drainage property. [ABSTRACT FROM AUTHOR]

Factors of manufacturing sustainability in the papermaking industry were identified and ranked using qualitative analysis and nonparametric tests. Based on a review of the literature on sustainable development and production, seven main factors of economic, environmental, technological, social, human, material and product, and regulations were identified to underpin the manufacturing sustainability in the papermaking industry, as well as some sub-factors. Then, a self-designed questionnaire was developed to take a poll among papermaking managers and experts regarding the effectiveness of the factors and sub-factors in manufacturing sustainability and their status. The factors affecting manufacturing sustainability in the papermaking industry were confirmed by the standard and significance coefficients in the structural equations and the predictive criterion. The cross-validated redundancy index showed that the data were valid enough for prediction. The research factors were ranked by the ordinal average affecting sustainability, current status, and distance to sustainability. The materials and product, environmental, technological, and economic factors had the greatest influence on manufacturing sustainability, and the regulation and human factors had the highest distance to sustainability. To achieve manufacturing sustainability in the papermaking industry, regulations and human factors need to be further studied. Their improvement has potential to achieve manufacturing sustainability. [ABSTRACT FROM AUTHOR]

Paper mills are among the most polluting industries, responsible for many organic and inorganic compounds emissions. The fibres electro-kinetic features strongly affect the ability to retain fillers since the fillers–fibres interactions are charge induced. The control and the prediction of these parameters would represent a precious aid for process management, allowing the fillers retention enhancement, a lower environmental impact and the paper sheet properties streamlining. The work presented deals with the implementation and training of four artificial neural networks (ANNs) for the prediction of the main electrochemical and physical features of cellulose pulp and paper. First, two ANNs predict the electrochemical parameters. Following, they were applied to predict the paper sheet properties and fillers retention. The neural models implemented showed outstanding prediction performance, with R2 in the order of 0.999 and a low mean error. The results demonstrate how Artificial Neural Networks may be a valuable instrument for paper mill pollutant reduction. However, they suggest a more inclusive investigation for a better fibres behaviour representation. • Main process parameters of an industrial papermaking process were identified. • Experimental datasets were achieved during industrial production. • Artificial Neural Networks were trained for process parameters prediction. • Accurate predictions of papermaking process were obtained. [ABSTRACT FROM AUTHOR]

Abstract Building bricks were produced by utilizing deinking paper mill sludge (DPMS) and alluvial soil by varying percentage of sludge at different firing temperatures. Different mix proportions were prepared with 0%, 5%, 10%, 15%, 20%, 25% and 30% of DPMS incorporation in alluvial soil by weight. Three firing temperatures of 900 °C, 950 °C and 1000 °C were investigated to simulate the typical condition of kiln. The density, firing shrinkage, water absorption, efflorescence, apparent porosity, compressive strength and thermal conductivity of the bricks were determined. The XRD and microstructural analysis of brick specimens were also studied. The optimum firing temperature was 950 °C. The thermal conductivity decreases with increase in percentage of deinking paper mill sludge. It was found that 15% deinking paper mill sludge gives optimum strength at firing temperature of 950 °C. Developed bricks satisfy the requirements of class 10 of Bureau of Indian Standards (BIS), in terms of efflorescence, compressive strength and water absorption. Thermal conductivity results show that the developed brick was thermally more insulated than the conventional bricks and can be used as alternative to conventional bricks. This will address the issue of waste management through cleaner production and show the ways towards sustainable, economical and energy efficient construction. Highlights • Building bricks were developed utilizing deinking paper mill sludge (DPMS) & soil. • Maximum level of DPMS in production brick is 15% at firing temperature of 950 °C. • The developed bricks satisfies the requirement of class 10 bricks of BIS. • Developed bricks are sustainable and thermally insulated. [ABSTRACT FROM AUTHOR]

This study aimed to identify the performance properties that drive the shelf price of kitchen paper towels and evaluate whether sustainability is an important driver for pricing. Nineteen products were compared according to their performance (softness, absorbency, and strength), technology, and fiber morphology. Metrics to rank the products in different grades (economy, premium, and ultra) according to their performance were provided. A multiple linear regression showed that absorbency and softness are the most significant properties used to predict the price. Market data indicates that there is a segment of consumers willing to pay a premium price for products marketed as "sustainable", even though their performance is comparatively inferior to the majority of the samples. Sustainable products are up to 85% more expensive than regular products. The metrics obtained in this work can contribute to improvement in market transparency, and aid companies in deciding strategies for product development and new investments. [ABSTRACT FROM AUTHOR]

Every year the pulp and paper industry consumes billions of metres cubed of water and produces huge amounts of highly polluted wastewater that needs to be treated. Conventional techniques of wastewater treatment require a high energy input and their environmental impact is debatable. Thus, the need to find new sustainable, environmentally friendly and efficient treatment techniques is urgent. Microbial fuel cells (MFC) are the technology of the future since they simultaneously treat wastewater and produce clean energy. The historical development of this technology towards its application to wastewater treatment was described. The application of MFCs in pulp and paper wastewater treatment is a new and developing field of investigation that still needs to overcome many limitations before its use on an industrial scale. This article reviews the limits of conventional treatment methods and the current state of the art MFC systems for pulp and paper wastewater treatment. The paper provides an overview of the electrogenic microorganisms able to produce electricity from pulp and paper wastewater. The bacteria, isolated at different stages of pulp and papermaking, are best suited for electrogenic activity in harsh environments. It was shown that MFC technology fully meets the requirements of sustainable pulp and paper wastewater treatment and, in terms of the input-output energy balance, remains energetically and environmentally competitive when compared to conventional treatment methods. [ABSTRACT FROM AUTHOR]