Search

We study the formation of a superradiant optical mode in the room temperature reflection spectra from resonant Bragg structures (RBSs) composed of single and double (In,Ga)N quantum wells (QWs) in the unit cell. The appearance of the mode manifests itself by a significant increase in the resonant optical reflectivity due to the electromagnetic coupling of quasi-two-dimensional excitons in the QWs. The implementation of the supercells with double (In,Ga)N QWs results in an increase in the oscillator strength of the quasi-2D excitons and corresponding rise of the radiative broadening parameter to the value as high as 0.3 ± 0.02 meV. We also show that the supercells with double QWs are preferable for RBS with large number of periods due to better tolerance to deviations from the exact periodicity. [ABSTRACT FROM AUTHOR]

Study of Ga2O3 deposition by MOVPE using trimethylgallium and oxygen was performed in a wide temperature range. It was found that for Ga2O3 deposition rate vs temperature dependence is very close to the TMGa pyrolysis in nitrogen. Kinetically-limited range for these processes corresponds to 550–700°C, that is 150°C higher, then for GaN deposition in the same reactor. [ABSTRACT FROM AUTHOR]

This paper proposes a new type of substrate for manufacturing LEDs based on AlInGaN heterostructures. Instead of depositing SiC layers on the surface of Si using the conventional method, a new method involving the coordinated substitution of atoms (MCSA) to form the SiC layer is proposed. This new approach enables the growth of epitaxial GaN layers with low defect content and facilitates transfer to any surface. The paper details the technology of manufacturing LEDs on SiC/Si substrates obtained by the MCSA and elaborates on the benefits of using these substrates in LED production. Additionally, the advantages of the growth interface between SiC and Si materials are discussed. Moreover, it is found that thinner SiC layers (<200 nm) contribute to the scattering of the LED's own radiation in the heterostructure waveguide, which decreases its absorption by silicon. For flip-chip LEDs with the substrate removed, substrates with thicker SiC layers (~400 nm) and a growth porous layer of several microns at the SiC-Si interface is utilized to simplify Si substrate removal and enhance the manufacturing process's cost-effectiveness. [ABSTRACT FROM AUTHOR]

Terahertz radiation emission from an electrically excited AlGaN/GaN heterostructure with a surface metal grating was studied under conditions of two-dimensional (2D) electron heating by the lateral electric field. Intensive peaks related to nonequilibrium 2D plasmons were revealed in the terahertz emission spectra with up to 4 times selective amplification of the radiation emission in the vicinity of 2D plasmon resonance. This selective emission was shown to be frequency-controllable by the grating period. Exact spectral positions of the 2D plasmon resonances were preliminarily experimentally detected with the help of equilibrium transmission spectra measured at various temperatures. The resonance positions are in a satisfactory agreement with the results of theoretical simulation of the transmission spectra performed using a rigorous solution of Maxwell's equations. The effective temperature of hot 2D electrons was determined by means of I – V characteristics and their analysis using the power balance equation. It was shown that for a given electric field, the effective temperature of nonequilibrium 2D plasmons is close to the hot 2D electron temperature. The work may have applications in GaN-based electrically pumped emitters of terahertz radiation. [ABSTRACT FROM AUTHOR]

Laser-assisted atom probe tomography (APT) and high-resolution dark-field electron holography (HR-DFEH) were performed to investigate the composition of a polar [0001] GaN/AlxGa1 − xN/InyGa1 − yN light emitting diode. In particular, the III-site fraction of both AlxGa1 − xN and InyGa1 − yN alloys was studied adopting a comparative approach. HR-DFEH allows mapping the projected strain with a subnanometer spatial resolution which is used for the calculation of the two-dimensional alloy composition distribution. APT provides three-dimensional alloys composition distribution with a nanometer spatial resolution. However, here we reveal that important inaccuracies affect local composition measurements. A Ga-poor composition is obtained in high DC-electric field regions. Moreover, such inaccuracies may be locally enhanced where the [0001] pole intersects the surface of the analyzed specimen, leading to a lower fraction of Ga measured. III-site fractions closer to the nominal values were measured at low field conditions. Ga loss is thought to be due to preferential DC field induced evaporation of Ga ions between laser pulses. This is explained in terms of formation of a metallic layer on the tip surface during APT analysis, where weak Ga-Ga bonds are formed, promoting the loss of Ga at high field conditions. [ABSTRACT FROM AUTHOR]

We studied the optical properties of periodic InGaN/GaN multiple quantum well systems with different numbers of periods. A resonant increase in the optical reflection and simultaneous suppression of the optical absorption have been revealed experimentally at room temperature when the Bragg and exciton resonances were tuned to each other. Numerical modeling with a single set of parameters gave a quantitatively accurate fit of the experimental reflection and transmission spectra in a wide wavelength range and various angles of the light incidence. The model included both exciton resonance and non-resonant band-to-band transitions in the InGaN quantum wells, as well as Rayleigh light scattering in the GaN buffer layer. The analysis also involved x-ray diffraction and photoluminescence data. It allowed us to determine the key parameters of the structure. In particular, the radiative broadening of the InGaN QW excitons was evaluated as 0.20 ± 0.02 meV. [ABSTRACT FROM AUTHOR]