Search

Microbial remediation is a viable and eco-friendly approach for decontaminating pollution. However, its effectiveness can be limited by the microorganisms' survival and growth in changing environments. Hydrochar materials have been utilized in this study to increase the growth and atrazine degradation capabilities of Paenarthrobacter sp. KN0901, a strain capable of atrazine biodegradation. Acid-modified hydrochars exhibited a higher carbonation rate, specific surface area, and number of defect sites compared to raw hydrochar. Following three days of incubation at 15 °C, the atrazine degradation rate increased from 90.7 % to 98.2 % when utilizing H 3 PO 4 -modified hydrochar (PHC). Additionally, the addition of PHC resulted in an increase in both bacterial concentration and cell viability of strain KN0901, by 1.6 and 1.4 times, respectively. Under various conditions, including temperatures of 4 ºC and 35 ºC, as well as pH levels of 5 and 9, and dd·H 2 O media, PHC exhibited a significant enhancement in atrazine degradation and cell viability of strain KN0901. Furthermore, PHC demonstrated the ability to sustain high proliferation and viability of strain KN0901 over five cycles, indicating its remarkable stability and biocompatibility. This study offers a new perspective on the development and application of bioremediation approaches in restoring atrazine-polluted environments, even under challenging conditions., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Atrazine causes concern due to its resistant to biodegradation and could be accumulated in aquatic organisms, causing pollution in lakes. This study measured the concentration of atrazine in ice and the water under ice through a simulated icing experiment and calculated the distribution coefficient K to characterize its migration ability in the freezing process. Furthermore, density functional theory (DFT) calculations were employed to expatiate the migration law of atrazine during icing process. According to the results, it could release more energy into the environment when atrazine staying in water phase (-15.077 kcal/mol) than staying in ice phase (-14.388 kcal/mol), therefore it was beneficial for the migration of atrazine from ice to water. This explains that during the freezing process, the concentration of atrazine in the ice was lower than that in the water. Thermodynamic calculations indicated that when the temperature decreases from 268 to 248 K, the internal energy contribution of the compound of atrazine and ice molecule (water cluster) decreases at the same vibrational frequency, resulting in an increase in the free energy difference of the compound from -167.946 to -165.390 kcal/mol. This demonstrated the diminished migratory capacity of atrazine. This study revealed the environmental behavior of atrazine during lake freezing, which was beneficial for the management of atrazine and other pollutants during freezing and environmental protection., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

As the rapidly growing number of waste lithium-ion batteries (LIBs), the recycling and reutilization of anode graphite is of increasing interest. Converting waste anode graphite into functional materials may be a sensible option. Herein, a series of carbonaceous catalysts (TG) were successfully prepared using spent anode graphite calcined at various temperatures and applied for activating peroxymonosulfate (PMS) to degrade atrazine (ATZ). The catalyst obtained at 800 °C (TG-800) showed the optimum performance for ATZ removal (99.2% in 6 min). Various experimental conditions were explored to achieve the optimum efficiency of the system. In the TG-800/PMS system, free radicals (e.g., SO 4 ·- , HO·), singlet oxygen ( 1 O 2 ), together with a direct electron transfer pathway all participated in ATZ degradation, and the ketonic (CO) group was proved as the leading catalytic site for PMS activation. The potential degradation routes of ATZ have also been presented. According to the toxicity assessment experiments, the toxicity of the intermediate products decreased. The reusability and universal applicability of the TG-800 were also confirmed. This research not only provides an efficient PMS activator for pollutant degradation, but also offers a meaningful reference for the recovery of waste anode graphite to develop environmentally functional materials., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Biodegradation, while cost-effective, is hindered by the requirement for specialized microorganisms and co-contaminants. Innovative biological technologies like the microbially driven Fenton reaction, hold promise for enhancing degradation efficiency. However, the intricate biochemical processes and essential steps for effective degradation in such systems have remained unclear. In this study, we harnessed the potential of the microbially driven Fenton reaction by employing Shewanella oneidensis MR-1 (MR-1). Our approach showcased remarkable efficacy in degrading a range of contaminants, including sulfadimethoxine (SDM), 4,4'-dibromodiphenyl ether (BDE-15) and atrazine (ATZ). Using SDM as a model contaminant of emergent contaminants (ECs), we unveiled that biodegradation relied on the generation of hydroxyl radicals (•OH) and involvement of oxidoreductases. Transcriptomic analysis shed light on the pivotal components of extracellular electron transfer (EET) during both anaerobic and aerobic periods. The presence of reactive oxidizing species induced cellular damage and impeded DNA repair, thereby affecting the Mtr pathway of EET. Moreover, the formation of vivianite hindered SDM degradation, underscoring the necessity of maintaining iron ions in the solution to ensure sustainable and efficient degradation. Overall, this study offers valuable insights into microbial technique for ECs degradation, providing a comprehensive understanding of degradation mechanisms during aerobic/anaerobic cycling., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Triazine pesticide (atrazine and its derivatives) detection sensors have been developed to thoroughly check for the presence of these chemicals and ultimately prevent their exposure to humans. Sensitive coatings were designed by utilizing molecular imprinting technology, which aims to create artificial receptors for the detection of chlorotriazine pesticides with gravimetric transducers. Initially, imprinted polymers were developed, using acrylate and methacrylate monomers containing hydrophilic and hydrophobic side chains, specifically for atrazine, which shares a basic heterocyclic triazine structure with its structural analogs. By adjusting the ratio of the acid to the cross-linker and introducing acrylate ester as a copolymer, optimal non-covalent interactions were achieved with the hydrophobic core of triazine molecules and their amino groups. A maximum sensor response of 546 Hz (frequency shift/layer height equal to 87.36) was observed for a sensitive coating composed of 46% methacrylic acid and 54% ethylene glycol dimethacrylate, with a demonstrated layer height of 250 nm (6.25 kHz). The molecularly imprinted copolymer demonstrated fully reversible sensor responses, not only for atrazine but also for its metabolites, like des-ethyl atrazine, and structural analogs, such as propazine and terbuthylazine. The efficiency of modified molecularly imprinted polymers for targeted analytes was tested by combining them with a universally applicable quartz crystal microbalance transducer. The stable selectivity pattern of the developed sensor provides an excellent basis for a pattern recognition procedure.

Ozone-based advanced oxidation processes (AOPs) have emerged a promising avenue for water treatment, offering effective removal of micropollutants. Recent research underscores the potential of ozone microbubbles to enhance ozone mass transfer during water treatment, particularly when combined with pre-treatment steps. This study aimed to evaluate the efficacy of three different combined processes (chlorine/KMnO 4 /PAC pre-treatment followed by ozonation) in removing atrazine, a common micropollutant from natural source water. Results revealed that all combined processes achieved higher atrazine removal rates compared to individual pre-treatment or ozonation methods. Notably, the highest atrazine removal rates were observed under alkaline pH conditions, with treatment outcomes influenced by oxidant dose and pH levels. Among the combined processes, chlorine pre-treatment followed by ozonation emerged as the most effective approach, achieving a removal rate of 59.7% that exceeded the sum of individual treatments. However, this treatment efficacy was affected by water quality parameters, particularly the presence of organic matter and elevated ammonia nitrogen concentration (> 0.5 mg/L). This study highlights the potential for utilizing ozone micro/nanobubbles to enhance ozone mass transfer and offers valuable insights for optimizing the combined application of pre-treatment and ozonation strategies for efficient atrazine removal from natural water sources., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The combination of ozone (O 3 ) and ferrate (Fe(VI)) oxidation technology demonstrates substantial potential for practical applications, though it has been underreported, resulting in gaps in comprehensive activity assessments and thorough exploration of its mechanisms. This study reveals that the previous use of a borate buffer solution obscured certain synergistic reactions between O 3 and Fe(VI), causing a reduction of activity by ∼40 % when oxidizing the electron-deficient pollutant atrazine. Consequently, we reassessed the activity and mechanisms using a buffer-salt-free O 3 /Fe(VI) system. Our findings showed that the hydroxyl radical ( · OH) served as the predominant active species, responsible for an impressive 95.9 % of the oxidation activity against electron-deficient pollutants. Additional experiments demonstrated that the rapid production of neglected and really important superoxide radicals ( · O 2 - ) could facilitate the decomposition of O 3 to generate · OH and accelerate the reduction of Fe(VI) to Fe(V), reactivating O 3 to produce · OH anew. Intriguingly, as the reaction progressed, the initially depleted Fe(VI) was partially regenerated, stabilizing at over 50 %, highlighting the significant potential of this combined system. Moreover, this combined system could achieve a high mineralization efficiency of 80.4 % in treating actual coking wastewater, complemented by extensive toxicity assessments using Escherichia coli, wheat seeds, and zebrafish embryos, showcasing its robust application potential. This study revisits and amends previous research on the O 3 /Fe(VI) system, providing new insights into its activity and synergistic mechanisms. Such a combined technology has potential for the treatment of difficult-to-degrade industrial wastewater., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Current molecular logic gates are predominantly focused on the qualitative assessment of target presence, which has certain limitations in scenarios requiring quantitative assessment, such as chemical contaminant monitoring. To bridge this gap, we have developed a novel DNA logic gate featuring a tunable threshold, specifically tailored to the limits of contaminants. At the core of this logic gate is a DNA-gold nanoparticle (AuNP) hybrid film that incorporates aptamer sequences to selectively bind to acetamiprid (ACE) and atrazine (ATR). Upon interaction with these contaminants, the film degrades, releasing AuNPs that, in the presence of Hg 2+ , catalyze the oxidation of TMB, resulting in a visible blue coloration on test paper. This aptamer-enabled process effectively establishes an OR logic gate, with ACE and ATR as inputs and the appearance of blue color as the output. A key innovation of our system is its tunable input threshold. By adjusting the concentration of Hg 2+ , we can fine-tune the color mutation points to match the input threshold to predefined limits, such as Maximum Residue Limits (MRLs). This alignment allows semiquantitative assessment of contaminant levels, providing intuitive visual feedback of contaminant exceedance. Validation experiments with spiked samples confirm its accuracy and reliability by closely matching HPLC results. Therefore, our colorimetric DNA logic gate is emerging as a promising tool for easy and semiquantitative monitoring of chemical contaminants across diverse applications.

Extensive utilization of pesticides and herbicides to boost agricultural production increased the environmental health risks, which can be mitigate with the aid of highly sensitive detection systems. In this study, an electrochemical sensor for monitoring the carcinogenic pesticides in the environmental samples has been developed based on sulfur-doped graphitic-carbon nitride-gold nanoparticles (SCN-AuNPs) nanohybrid. Thermal polycondensation of melamine with thiourea followed by solvent exfoliation via ultrasonication leads to SCN formation and electroless deposition of AuNPs on SCN leads to SCN-AuNPs nanohybrid synthesis. The chemical composition, S-doping, and the morphology of the nanohybrid were confirmed by various microscopic and spectroscopic tools. The as-synthesized nanohybrid was fabricated with glassy carbon (GC) electrode for determining the carcinogenic hydrazine (HZ) and atrazine (ATZ) in field water samples. The present sensor exhibited superior electrocatalytic activity than GC/SCN and GC/AuNPs electrodes due to the synergism between SCN and AuNPs and the amperometric studies showed the good linear range of detection of 20 nM-0.5 mM and 500 nM-0.5 mM with the limit of detection of 0.22 and 69 nM (S/N = 3) and excellent sensitivity of 1173.5 and 13.96 μA mM -1 cm -2 towards HZ and ATZ, respectively. Ultimately, the present sensor is exploited in environmental samples for monitoring HZ and ATZ and the obtained results are validated with high-performance liquid chromatography (HPLC) technique. The excellent recovery percentage and close agreement with the results of HPLC analysis proved the practicability of the present sensor. In addition, the as-prepared materials were utilized for the photocatalytic degradation of ATZ and the SCN-AuNPs nanohybrid exhibited higher photocatalytic activity with the removal efficiency of 93.6% at 90 min. Finally, the degradation mechanism was investigated and discussed., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

The production of sugarcane bioethanol generates large volumes of vinasse, an effluent whose final disposal can produce an environmental impact that is of concern. The long-term disposal of vinasse in sugarcane fields could challenge crop management, such as the performance of traditional herbicides, by changing soil properties. This study aimed to evaluate the effect of long-term vinasse application on the field and the dissipation of atrazine and ametryn herbicides in a subtropical sugarcane agroecosystem, and to discuss the potential processes involved in it. Vinasse affected soil properties by increasing pH (12%), electrical conductivity (160%), and soil organic carbon (25%) at 0-10 cm depth of soil. Differences in the herbicide calculated sorption coefficient (Kd) varied according to the pedotransfer function applied and the herbicide type (atrazine or ametryn). During the first seven days after herbicide application, the soil underwent long-term vinasse application and increased atrazine and ametryn dissipation 45% and 33%, respectively, compared with the conventional fertilization scheme (control). The Pesticide Root Zone Model revealed that dissipation was mediated mainly by the degradation process rather than transport or other processes. The long-term application of vinasse in a typical sugarcane field of Tucumán, Argentina decreased the potential groundwater pollution of triazines and, adversely, reduced their bioavailability for weed control. For this, the present study presents original information about how long-term treatment with vinasse may require an adaptation of conventional management practices such as the application of herbicides in Argentina and other sugarcane-producing regions. Integr Environ Assess Manag 2024;20:1075-1086. © 2023 SETAC., (© 2023 SETAC.)

In the conventional drinking water treatment process (CDWTP), powdered activated carbon (PAC) is commonly used for removing organic pesticides, or other organic contaminants. However, the hydraulic retention time (HRT) in CDWTP is insufficient for fulfilling PAC adsorption equilibrium to realize its full capacity. This study examined the adsorption kinetics, adsorption thermal dynamics, and removal efficiency for six organic pesticides using the ball-milled PAC (BPAC) with varying particle sizes in CDWTP. Based on the experiments with the pesticides of atrazine, diazinon, dimethoate, fenitrothion, isoproturon and thiometon, the results indicated that as the particle size reduced from around 38 μm for the commercial PAC to 1 μm for the BPAC, the adsorption rates for hydrophobic pesticides increased up to twentyfold. Diffusional adsorption from the bulk solution to the external PAC surface is the most likely predominant mechanism. This could allow a sufficient pesticides' adsorption within the limited HRT and to achieve a great depth removal of these toxic compounds. However, the addition of BPAC with a diameter of 1 μm was observed to significantly increase residual particles in treated water after the conventional treatment process. With a further systematic evaluation of both adsorption rate and particle penetration, a particle size of around 6 μm BPAC was considered a practical compromise between the adsorption rate and particle penetration for real application. Results from five surface waters of different water quality indicated that, compared to commercial PAC, application of 6 μm BPAC could achieve up to a 75% reduction in adsorbent dosage while maintaining around the same pesticide removal efficiencies. Additionally, thermodynamic analyses suggest that adsorption of these pesticides could be enthalpically or entropically driven depending on the degree of pesticide hydrophobicity., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Microbial herbicide degradation is an efficient bioremediation method. In this study, a strain of Streptomyces nigra, LM01, which efficiently degrades atrazine and nicosulfuron, was isolated from a corn field using a direct isolation method. The degradation effects of the identified strain on two herbicides were investigated and optimized using an artificial neural network. The maximum degradation rates of S. nigra LM01 were 58.09 % and 42.97 % for atrazine and nicosulfuron, respectively. The degradation rate of atrazine in the soil reached 67.94 % when the concentration was 10 8 CFU/g after 5 d and was less effective than that of nicosulfuron. Whole genome sequencing of strain LM01 helped elucidate the possible degradation pathways of atrazine and nicosulfuron. The protein sequences of strain LM01 were aligned with the sequences of the degraded proteins of the two herbicides by using the National Center for Biotechnology Information platform. The sequence (GE005358, GE001556, GE004212, GE005218, GE004846, GE002487) with the highest query cover was retained and docked with the small-molecule ligands of the herbicides. The results revealed a binding energy of - 6.23 kcal/mol between GE005358 and the atrazine ligand and - 6.66 kcal/mol between GE002487 and the nicosulfuron ligand., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Herein, a straightforward protocol was developed for the one-pot synthesis of N-doped lignosulfonate-derived carbons (NLDCs) with a tunable porous structure using natural amino acids-templated self-assembly strategy. Specifically, histidine was employed as a template reagent, leading to the preparation of 10-NLDC-21 with remarkable characteristics, including the large specific surface area (S BET  = 1844.5 m 2 /g), pore volume (V mes  = 1.22 cm 3 /g) and efficient adsorption for atrazine (ATZ) removal. The adsorption behavior of ATZ by NLDCs followed the Langmuir and pseudo-second-order models, suggesting a monolayer chemisorption nature of ATZ adsorption with the maximum adsorption capacity reached up to 265.77 mg/g. Furthermore, NLDCs exhibited excellent environmental adaptability and recycling performance. The robust affinity could be attributed to multi-interactions including pore filling, electrostatic attraction, hydrogen bonding and π-π stacking between the adsorbents and ATZ molecules. This approach offers a practical method for exploring innovative bio-carbon materials for sewage treatment., Competing Interests: Declaration of competing interest The authors declare no conflicts of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

An efficient perovskite-based heterogeneous catalyst is highly desired to activate peroxymonosulfate (PMS) for removing organic pollutants in water. A high surface area PMS-activator was fabricated by loading LaCoO 3 on SBA-15 to degrade atrazine (ATR) in water. The LaCoO 3 /SBA-15 depicted better textural properties and higher catalytic activity than LaCoO 3 . In 6.0 min, atrazine (ATZ) degradation in the selected LaCoO 3 /SBA-15/PMS system, LaCoO 3 , adsorption by LaCoO 3 /SBA-15, sole PMS processes reached approximately 100%, 55.15%, 12.80%, and 16.65 % respectively. Furthermore, 0.04 mg L -1 Co was leached from LaCoO 3 /SBA-15 during PMS activation by LaCoO 3 /SBA-15. The LaCoO 3 /SBA-15 showed stable catalytic activity after reuse. The use of radical scavengers and electron paramagnetic resonance spectroscopy (EPR) demonstrated that ROS such as 1 O 2 , O 2 •- , • OH, and SO 4 •- were generated by PMS activated by LaCoO 3 /SBA-15 owing to redox reactions [Co 2+ /Co 3+ , and O 2- /O 2 ]. EPR, XPS, ATR-FTIR, EIS, LSV, and chronoamperometric measurements were used to explain the catalytic mechanism for PMS activation. Excellent atrazine degradation was due to high surface area, porous nature, diffusion-friendly structure, and ROS. Our investigation proposes that perovskites with different A and B metals and modified perovskites can be loaded on high surface area materials to activate PMS into ROS., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Quinone analogue molecules, functioning as herbicides, bind to the secondary quinone site, Q B , in type-II photosynthetic reaction centers, including those from purple bacteria (PbRC). Here, we investigated the impact of herbicide binding on electron transfer branches, using herbicide-bound PbRC crystal structures and employing the linear Poisson-Boltzmann equation. In contrast to urea and phenolic herbicides [Fufezan, C. Biochemistry 2005, 44, 12780-12789], binding of atrazine and triazine did not cause significant changes in the redox-potential ( E m ) values of the primary quinone (Q A ) in these crystal structures. However, a slight E m difference at the bacteriopheophytin in the electron transfer inactive branch (H M ) was observed between the S (-)- and R (+)-triazine-bound PbRC structures. This discrepancy is linked to variations in the protonation pattern of the tightly coupled Glu-L212 and Glu-H177 pairs, crucial components of the proton uptake pathway in native PbRC. These findings suggest the existence of a Q B -mediated link between the electron transfer inactive H M and the proton uptake pathway in PbRCs.

Pesticides and fertilisers are frequently used and may co-exist on farmlands. The overfertilisation of soil may have a profound influence on pesticide residues, but the mechanism remains unclear. The effects of chemical fertilisers on the environmental behaviour of atrazine and their underlying mechanisms were investigated. The present outcomes indicated that the degradation of atrazine was inhibited and the half-life was prolonged 6.0 and 7.6 times by urea and compound fertilisers (NPK) at 1.0 mg/g (nitrogen content), respectively. This result, which was confirmed in both sterilised and transfected soils, was attributed to the inhibitory effect of nitrogen fertilisers on soil microorganisms. The abundance of soil bacteria was inhibited by nitrogen fertilisers, and five families of potential atrazine degraders (Micrococcaceae, Rhizobiaceae, Bryobacteraceae, Chitinophagaceae, and Sphingomonadaceae) were strongly and positively (R > 0.8, sig < 0.05) related to the decreased functional genes (atzA and trzN), which inhibited hydroxylation metabolism and ultimately increased the half-life of atrazine. In addition, nitrogen fertilisers decreased the sorption and vertical migration behaviour of atrazine in sandy loam might increase the in-situ residual and ecological risk. Our findings verified the weakened atrazine degradation with nitrogen fertilisers, providing new insights into the potential risks and mechanisms of atrazine in the context of overfertilisation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Atrazine (ATZ) is widely used in agriculture as a triazine herbicide, and its long-term use can cause serious environmental pollution. This paper independently designed a multi-electrode reactor, explored the output power and energy utilization efficiency of the dielectric barrier discharge reactor, and used the dielectric barrier discharge reactor to treat ATZ solution. The results showed that the degradation efficiency of ATZ was 96.39% at 30 min at an initial ATZ concentration of 14 mg/L, an input voltage of 34 kV, an input current of 1.38 mA, an aeration rate of 100 L/h, and a treatment water volume of 150 mL. The degradation of ATZ was significantly increased by the addition of persulfate (PS), Fe 2+ , and H 2 O 2 . After adding radical quenchers (EtOH, p-BQ, and FFA), the degradation efficiency of ATZ decreased, indicating that free radicals (•OH, •O 2 - , and 1 O 2 ) played a key role in the degradation process of ATZ., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

We established the optimal model by using the automatic machine learning method to predict the degradation efficiency of herbicide atrazine in soil, which could be used to assess the residual risk of atrazine in soil. We collected 494 pairs of data from 49 published articles, and selected seven factors as input features, including soil pH, organic matter content, saturated hydraulic conductivity, soil moisture, initial concentration of atrazine, incubation time, and inoculation dose. Using the first-order reaction rate constant of atrazine in soil as the output feature, we established six models to predict the degradation efficiency of atrazine in soil, and conducted comprehensive analysis of model performance through linear regression and related evaluation indicators. The results showed that the XGBoost model had the best performance in predicting the first-order reaction rate constant ( k ). Based on the prediction model, the feature importance ranking of each factor was in an order of soil moisture > incubation time > pH > organic matter > initial concentration of atrazine > saturated hydraulic conductivity > inoculation dose. We used SHAP to explain the potential relationship between each feature and the degradation ability of atrazine in soil, as well as the relative contribution of each feature. Results of SHAP showed that time had a negative contribution and saturated hydraulic conductivity had a positive contribution. High values of soil moisture, initial concentration of atrazine, pH, inoculation dose and organic matter content were generally distributed on both sides of SHAP=0, indicating their complex contributions to the degradation of atrazine in soil. The XGBoost model method combined with the SHAP method had high accuracy in predicting the performance and interpretability of the k model. By using machine learning method to fully explore the value of historical experimental data and predict the degradation efficiency of atrazine using environmental parameters, it is of great significance to set the threshold for atrazine application, reduce the residual and diffusion risks of atrazine in soil, and ensure the safety of soil environment.

Atrazine is an important herbicide that has been widely used for weed control in recent decades. However, with the extensive use of atrazine, its residue seriously pollutes the environment. Therefore, the microbial degradation and detoxification of atrazine have received extensive attention. To date, the aerobic degradation pathway of atrazine has been well studied; however, little is known about its anaerobic degradation in the environment. In this study, an anaerobic microbial consortium capable of efficiently degrading atrazine was enriched from soil collected from an herbicide-manufacturing plant. Six metabolites including hydroxyatrazine, deethylatrazine, N-isopropylammelide, deisopropylatrazine, cyanuric acid, and the novel metabolite 4-ethylamino-6-isopropylamino-1,3,5-triazine (EIPAT) were identified, and two putative anaerobic degradation pathways of atrazine were proposed: a hydrolytic dechlorination pathway is similar to that seen in aerobic degradation, and a novel pathway initiated by reductive dechlorination. During enrichment, Denitratisoma, Thiobacillus, Rhodocyclaceae&#95;unclassified, Azospirillum, and Anaerolinea abundances significantly increased, dominating the enriched consortium, indicating that they may be involved in atrazine degradation. These findings provide valuable evidence for elucidating the anaerobic catabolism of atrazine and facilitating anaerobic remediation of residual atrazine pollution., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

The first systematic and comprehensive investigation of herbicide residues was conducted by identifying their spatial distribution, influencing factors and ecological risk in cropland soils from the Mollisols region covering 109 million hm 2 in Northeast China. Fifty-six herbicides were detected with total herbicide concentrations ranging from 1.01 to 1558.13 μg/kg (mean: 227.45). Atrazine, its degradates deethyl atrazine (DEA) and deisopropyl atrazine (DIA), trifluralin and butachlor were the most frequently detected herbicides, while DEA, clomazone, nicosulfuron, fomesafen, and mefenacet exhibited the highest concentrations. Despite being less frequently reported in Chinese soils, fomesafen, nicosulfuron, clomazone, and mefenacet were found widely present. Although most of the compounds posed a minimal or low ecological risk, atrazine, nicosulfuron and DEA exhibited medium to high potential risks. The key factors identified to regulate the fate of herbicides were soil chemical properties, amount of herbicides application, and the crop type. The soybean soils showed highest herbicide residues, while the soil mineral contents likely adsorbed more herbicides. This study provides a valuable large-scale dataset of herbicide residues across the entire Mollisols region of China along with fine-scale characterization of the ecological risks. Mitigation and management measures are needed to reduce the herbicide inputs and residues in the region., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The abuse and residue of herbicides in the black soil area had seriously affected the soil structure, function and crop growth, posing severe threats to agricultural soil environment and public health. Given the limitation of routine microbial remediation, innovative and eco-friendly functional bacterial biofilm which could adapt under adverse conditions was developed on the biochar to investigate its enhanced bioremediation and metabolic characteristics of typical herbicide atrazine. Results revealed that the atrazine degrading strain Acinetobacter lwoffii had competitive advantage in soil indigenous microorganisms and formed dense biofilms on the biochar which was beneficial to cell viability maintenance and aggregations. Metatranscriptomics and RT-qPCR analysis demonstrated that the biochar-mediated biofilm improved the frequency of intercellular communications through quorum sensing and two-component signal regulation systems, and enhanced the atrazine biodegradation efficiency through horizontal gene transfer in co-metabolism mode, providing important scientific basis for the biological remediation of farmland soil non-point source pollution., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have influenced the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Pesticides and its degradation products, being well-known residues in soil, have recently been detected in many water bodies as pollutants of emerging concerns, and thus there is a contemporary demand to develop viable and cost-effective techniques for the removal of related organic pollutants in aqueous phases. Herein, a visible-light-responsive Fenton system was constructed with iron-doped bismuth oxybromides (Fe-BiOBr) as the catalysts. Taking the advantage of sustainable Fe(III)/Fe(II) conversion and optimized H 2 O 2 utilization, the optimal Fe-BiOBr-2 catalyst showed an excellent atrazine removal efficiency of 97.61% in 120 min, which is superior than the traditional homogeneous Fenton and the majority of heterogeneous processes documented in the literature. In this photo-Fenton system, hydroxyl (·OH) and superoxide (·O 2 - ) radicals were dominant active species contributed to the oxidative degradation of atrazine. Due to the production of various active radicals, five degradation pathways were proposed based on the identification of intermediates and degradation products. Overall, this work not only demonstrates a fundamental insight into creating highly efficient and atom economic photo-Fenton systems, but also provides a complementary strategy for the treatment of organic pollutants in water., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this article., (Copyright © 2023. Published by Elsevier B.V.)

The degradation kinetics and mechanism of atrazine (ATZ) via an enzyme-based Fenton reaction were investigated at various substrate concentrations and pH values. Toxicological assessment was conducted on ATZ and its degradation products, and the associated reaction pathway was examined. The in situ production of hydrogen peroxide (H 2 O 2 ) was monitored within the range of 3-15 mM, depending on the increase in glucose concentration, while decreasing the pH to 3.2-5.1 (initial pH of 5.8) or 6.5-7.4 (initial pH of 7.7). The degradation efficiency of ATZ was approximately 2-3 times higher at an initial pH of 5.8 with lower glucose concentrations than at an initial pH of 7.7 with higher substrate concentrations during the enzyme-based Fenton reaction. The apparent pseudo-first-order rate constant for H 2 O 2 decomposition under various conditions in the presence of ferric citrate was 1.9-6.3 × 10 -5 s -1 . The •OH concentration ([•OH] ss ) during the enzyme-based Fenton reaction was 0.5-4.1 × 10 -14  M, and the second-order rate constant for ATZ degradation was 1.5-3.3 × 10 9  M -1  s -1 . ATZ intrinsically hinders the growth and development of Arabidopsis thaliana, and its inhibitory effect is marginal, depending on the reaction time of the enzyme-based Fenton process. The ATZ transformation during this process occurs through dealkylation, hydroxylation, and dechlorination via •OH-mediated reactions. The degradation kinetics, mechanism, and toxicological assessment in the present study could contribute to the development and application of enzyme-based Fenton reactions for in situ pollutant abatement. Moreover, the enzyme-based Fenton reaction could be an environmentally benign and applicable approach for eliminating persistent organic matter, such as herbicides, using diverse H 2 O 2 -producing microbes and ubiquitous ferric iron with organic complexes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

The coexistence of herbicide atrazine (ATZ) and the nanomaterial graphene oxide (GO) in natural water bodies will be an inevitable scenario due to their widespread application and consequent release into aquatic ecosystems. But the dissipation of ATZ with GO and the response of the microbial community to their combination are still not clear. Here, we investigated the dissipation dynamics and transformation of ATZ with and without GO in river water after 21-d incubation. In the presence of GO, ATZ residue significantly decreased by 11%-43%; the transformation of ATZ markedly increased by 11%-17% when ATZ concentrations were not above 1.0 mg∙L -1 . The direct adsorption of ATZ on GO, mainly via π-π interactions, proton transfer and hydrogen bonding, contributed 54%-68% of the total increased ATZ dissipation by GO. ATZ and ATZ+GO exerted effects of similar magnitude on microbial OTU numbers with an increase of bacterial diversity. The coexisting GO increased the relative abundance of ATZ-degradation bacteria and Chitinophagales, thus improving ATZ transformation. This work indicated that the coexistence of GO at environmentally relevant concentrations can effectively reduce ATZ residues and promote the transformation of ATZ to degradation products in river water; nevertheless, the potential risk of GO acting as an ATZ carrier should be given more prominence., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Atrazine, a widely used herbicide in agriculture, is detrimental to both the ecological environment and human health owing to its extensive use, poor degradability, and biotoxicity. The technology commonly used to remove atrazine from water is activated carbon adsorption, but it has the problems of difficult recovery, secondary contamination, and a low removal rate. To efficiently remove atrazine from agricultural wastewater, in this study, a new environmental material, embedding immobilization (EI)-Co- and Zr-modified activated carbon powder (Co/Zr@AC), was prepared by immobilizing the bimetallic Co/Zr@AC via EI technique and employed to remove atrazine. When preparing EI-Co/Zr@AC, the single-factor experiment was conducted and determined the optimal preparation conditions: sodium alginate 2.5% (wt), calcium chloride 4.0% (wt), Co/Zr@AC 1.0% (wt), and bentonite 2.0% (wt). The prepared EI-Co/Zr@AC has a three-dimensional mesh structure and many pores and also possesses good mass transfer performance and mechanical properties. The removal efficiency by EI-Co/Zr@AC for the removal of 5.0 mg/L atrazine from 50 mL was 94.1% at pH 7.0 and 25°C, with an EI-Co/Zr@AC dosage of 0.8 g. The mechanistic study showed that the pseudo-second-order kinetic model could describe the removal process better than the pseudo-first-order kinetic model, and the Freundlich isotherm model fit better than other isotherm models. Additionally, the synthesized EI-Co/Zr@AC spheres demonstrated good reusability, with the atrazine removal rate remaining 70.4% after five cycles, and the mechanical properties of the spheres were stable., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The competition impact and feedstock type on the removal of water pesticides using biochar have not yet been sufficiently investigated. Therefore, here we investigated the potentiality of three different biochars (BCs) derived from rice husk (RHB), date pit (DPB), and sugarcane bagasse (SBB) biowastes for the simultaneous removal of ten pesticides from water in a competitive adsorption system. The BCs structural characterization and morphology were investigated by XRD, FTIR spectroscopy and SEM analysis. The potential adsorption mechanisms have been investigated using various isothermal and kinetic models. RHB showed the highest removal percentages (61% for atrazine/dimethoate and 97.6% for diuron/chlorfenvinphos) followed by DPB (56% for atrazine/dimethoate and 95.4% for diuron/chlorpyrifos) and then SBB (60.8% for atrazine/dimethoate and 90.8% for chlorpyrifos/malathion). The higher adsorption capacity of RHB and DPB than SBB can be due to their high total pore volume and specific surface area (SSA). Langmuir model described well the sorption data (R 2  = 0.99). Adsorption equilibrium was achieved after 60 min for RHB, and 120 min for both DPB and SBB. The optimum adsorbent dose (g/L) was 10 for RHB and 4 for DPB and SBB. The removal efficiency of pesticides was enhanced by decreasing pH from 9 to 5 by RHB and to 3 by DPB and SBB. XRD and FTIR spectroscopy confirmed that BCs contain some active adsorption groups and metal oxides such as MgO, SiO, Al 2 O 3 , CaO, and TiO 2 that can play an effective role in the pesticides sorption. BET-N 2 adsorption analysis demonstrated that the BC pore size contributes significantly to pesticide adsorption. These findings indicate that RHB, DPB, and SBB have ability for adsorption of water pesticides even under acidic conditions. Therefore, the rice husk, date pit, and sugarcane bagasse biowastes could be pyrolyzed and reused as effective and low-cost sorbents for elimination of hazardous substances such as pesticides in the aqueous environments., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

A challenge to successfully implementing an injection-based remedial treatment in aquifers is to ensure that the oxidative reaction is efficient and lasts long enough to contact the contaminated plume. Our objective was to determine the efficacy of zinc ferrite nanocomposites (ZnFe 2 O 4 ) and sulfur-containing reductants (SCR) (i.e., dithionite; DTN and bisulfite; BS) to co-activate persulfate (S 2 O 8 2- ; PS) and treat herbicide-contaminated water. We also evaluated the ecotoxicity of the treated water. While both SCRs delivered excellent PS activation in a 1:0.4 ratio (PS:SCR), the reaction was relatively short-lived. By including ZnFe 2 O 4 in the PS/BS or PS/DTN activations, herbicide degradation rates dramatically increased by factors of 2.5 to 11.3. This was due to the SO 4 - and OH reactive radical species that formed. Radical scavenging experiments and ZnFe 2 O 4 XPS spectra results revealed that SO 4 - was the dominant reactive species that originated from S(IV)/PS activation in solution and from the Fe(II)/PS activation that occurred on the ZnFe 2 O 4 surface. Based on liquid chromatography mass spectrometry (LC-MS), atrazine and alachlor degradation pathways are proposed that involve both dehydration and hydroxylation. In 1-D column experiments, five different treatment scenarios were run using 14 C-labeled and unlabeled atrazine, and 3 H 2 O to quantify changes in breakthrough curves. Our results confirmed that ZnFe 2 O 4 successfully prolonged the PS oxidative treatment despite the SCR being completely dissociated. Toxicity testing showed treated 14 C-atrazine was more biodegradable than the parent compound in soil microcosms. Post-treatment water (25 %, v/v) also had less impact on both Zea Mays L. and Vigna radiata L. seedling growth, but more impact on root anatomies, while ≤4 % of the treated water started to exert cytotoxicity (<80 % viability) on ELT3 cell lines. Overall, the findings confirm that ZnFe 2 O 4 /SCR/PS reaction is efficient and relatively longer lasting in treating herbicide-contaminated groundwater., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Additive metal to zero-valent iron (ZVI) could enhance the reduction ability and the additive Cu 0 was incorporated to ZVI to accelerate PMS activation with atrazine (ATZ) as target compound. The efficiencies of ATZ degradation and PMS decomposition climbed up firstly and then declined as Cu 0 loading increased from 0.01 to 1.00 wt% with the maximums at 0.10 wt%. SO 4 •- , HO • , Fe(IV), O 2 •- and 1 O 2 were generated by nZVI-Cu 0 /PMS based on the results of electron paramagnetic resonance (EPR) and simultaneous degradation of nitrobenzene, ATZ, and methyl phenyl sulfoxide (PMSO). The rate constant of Fe(IV) and ATZ was estimated as 7 × 10 4 M -1 ∙s -1 via the variation of methyl phenyl sulfone (PMSO 2 )formation at different ATZ concentrations. However, Fe(IV) contributed negligibly to ATZ degradation due to the strong scavenging of Fe(IV) by PMS. SO 4 •- and HO • were the reactive species responsible for ATZ degradation and the yield ratio of SO 4 •- and HO • was about 8.70 at initial stage. Preliminary thermodynamic calculation on the possible activation ways revealed that the dominant production of SO 4 •- might originate from the atomic H reduction of PMS in the surface layer of nZVI-Cu 0 . Ten products of ATZ degradation were identified by HPLC/ESI/QTOF and the possible degradation pathways were analyzed combined with theoretical calculation on ATZ structure. The decrease of temperature or increase of solution pH led to the decline of ATZ degradation, as well as the individual addition of common ions (HCO 3 - , Cl - , SO 4 2- , NH 4 + , NO 3 - and F - ) and natural organic matters (NOM). In real water, ATZ was still efficiently degraded with the decontamination efficiency decreasing in the sequence of tap water > surface water > simulated wastewater > groundwater. For the treatment of ATZ-polluted continuous flow, nZVI-Cu 0 in double-layer layout had a higher capacity than the single-layer mode. Meanwhile, the leaching TFe and TCu were limited. The results indicate nZVI-Cu 0 /PMS is applicable and the multiple-layer layout of nZVI-Cu 0 is suggested for ATZ-polluted ground water and soil remediation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Long-term input of agricultural chemicals such as pesticides into the soil can increase soil pollution, thereby affecting the productivity and quality of black soil. Triazine herbicide atrazine has been shown to have long-lasting residual effects in black soil. The atrazine residues affected soil biochemical properties, further leading to microbial metabolism restriction. It is necessary to explore the strategies to mitigate the limitations on microbial metabolism in atrazine-contaminated soils. Here, we evaluated the effect of the atrazine on microbial nutrient acquisition strategies as indicated by extracellular enzyme stoichiometry (EES) in four black soils. Atrazine degradation in soil followed the first-order kinetics model across various concentrations ranging from 10 to 100 mg kg -1 . We found that the atrazine was negatively correlated with the EES for C-, N-, and P-acquisition. Vector lengths and angles decreased and increased significantly with an increase of atrazine concentration in tested black soils except for Lishu soils. Moreover, the vector angles were >45° for tested four black soils, indicating that atrazine residue had the greatest P-limitation on soil microorganisms. Interestingly, microbial C- and P-limitations with different atrazine concentrations showed a strong linear relationship, especially in Qiqihar and Nongan soils. Atrazine treatment significantly negatively affected microbial metabolic limitation. Soil properties and EES interaction explained up to 88.2% for microbial C-/P-limitation. In conclusion, this study confirms the EES as a useful method in evaluating the effects of pesticides on microbial metabolic limitations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

In sulfate radical-based advanced oxidation processes (SR-AOPs), high-efficiency and perdurable materials have drawn considerable interest for use as cathodes, which can effectively degrade refractory organic contaminants through the synergistic electro-activation and transition metal activation of persulfate (PS). Here, the FeCuO@C modified composite cathode (FeCuO@C/AGF) was synthesized via the solvothermal and thermal treatment method based on the CuFe-MOF-74 structure, and the electro-activation PS process (EC/FeCuO@C/AGF/PS) was developed to effectively remove atrazine (ATZ). The surface morphology, electrochemical characteristics, chemical composition, crystal structure, and electrode surface wettability of FeCuO@C/AGF were investigated. It was found that the proposed EC/FeCuO@C/AGF/PS process can successfully remove 100% of ATZ in 20 min at a low current density (2 mA cm -2 ) and a low PS concentration (0.4 mM), and PS is successfully activated by combining the electrical and transition metal synergistic activation. The FeCuO@C/AGF cathode exhibits outstanding catalytic functionality over a broad pH range (2-9) and remains stable over five successive cycles. Additionally, the active species involved in the reaction as well as the potential ATZ degradation reaction mechanisms and pathways are discussed. Electrochemical oxidation is a process in which both radicals (SO 4 ·- , ·OH, and O 2 ·- ) and non-radical ( 1 O 2 ) participate in the degradation of ATZ. The intermediates of the ATZ degradation process were studied upon the toxicity changing, and the toxicity of the intermediates was found to be reduced during degradation. These results present a novel approach toward the establishment of an effective and reliable electrode in SR-AOPs that can efficiently treat pesticide wastewater., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

A series of Zn-Al Layered Double Oxides (ZnAl-LDO) composites were prepared by the hydrothermal and calcination method via employing the Zn-Al Layered Double Hydroxide (ZnAl-LDH) as the precursors in the present study. The structural properties and the catalytic ozonation activity of Zn r Al-T composites synthesized with different Zn/Al molar ratios and calcination temperatures were systematically investigated. Diversified characterizations were applied to analyze the phase structure and chemical composition of Zn r Al-T composites. As the calcination temperature increased, the layered ZnAl-LDH structure could be entirely destroyed and the crystallinity gradually improved. With the Zn/Al mole ratio of 4.0 and calcination temperature of 500°C, the Zn4Al-500 composite obtained the outstanding catalytic ozonation performance for atrazine (ATZ) degradation with the pseudo-first-order constant of 0.5080 min -1 , which was 5 times more than that in O 3 alone. Meanwhile, the ATZ degradation efficiency was gradually enhanced from 44.1% to 99.9% within 3.0 min when the solution pH ranged from 3.0 to 10.0. Besides, the Zn 4 Al-500 composite exhibited splendid stability over multiple reaction cycles. In addition, the radical scavenging test and electron spin resonance measurement demonstrated that superoxide radical and hydroxyl radical are the dominant reactive species in O 3 /Zn 4 Al-500 process. Moreover, nineteen and ten transformation products were detected in O 3 alone and O 3 /Zn 4 Al-500 process, and possible degradation pathways of ATZ were further elucidated. Overall, the Zn 4 Al-500 composite would provide a potential alternative for pollutants removal due to its high catalytic ozonation efficiency, stability, and reusability.

Agrobacterium rhizogenes AT13, a novel bacterial strain that was isolated from contaminated soil, could utilize atrazine as the sole nitrogen, thereby degrading it. Optimization of the degradation reaction using a Box-Behnken design resulted in 99.94% atrazine degradation at pH 8.57, with an inoculum size of 3.10 × 10 9  CFU/mL and a concentration of 50 mg/L atrazine. Ultra-high performance liquid chromatography-electrospray ionization-high resolution mass spectrometry (UPLC-ESI-HRMS), liquid chromatography tandem mass spectrometry (LC-MS/MS) and high performance liquid chromatography (HPLC) analyses identified and quantified six reported metabolites and a novel metabolite (2-hydroxypropazine) from atrazine degradation by AT13. On the basis of these metabolites, we propose an atrazine degradation pathway that includes dichlorination, hydroxylation, deamination, dealkylation and methylation reactions. The toxicity of the degradation products was evaluated by Toxicity Estimation Software Tool (T.E.S.T). Bioaugmentation of atrazine-polluted soils/water with strain AT13 significantly improved the atrazine removal rate. Thus, AT13 has potential applications in bioremediation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Efficient degradation technologies are urgent to be developed to avoid the ecological and healthy hazards brought from atrazine (ATZ). LaCoO 3-δ /peroxymonosulfate (PMS) system was proved to have strong degradation capabilities to contaminants. In this work, we intended to investigate the effect of the synthesis method on LaCoO 3-δ . However, the hydrothermal method yielded a new material (H-Co) with better catalytic performance than LaCoO 3-δ , which showed stable catalytic ability at pH 3.0-9.0 and 5 consecutive cycles. The coexistence of inorganic Cl - , SO 4 2- , NO 3 - , H 2 PO 4 - , HCO 3 - and organic humic acids exerted little influences on the H-Co/PMS system. In addition, the actual livestock and poultry breeding wastewater could be well degraded and mineralized by the H-Co/PMS system. Free radical burst experiments and EPR characterization were performed to verify the synergistic effects of free radicals and non-free radicals during ATZ degradation. Based on SEM, XRD, O 2 -TPD, FTIR, XPS, and electrochemistry characterizations, the efficient catalytic ability of H-Co could be attributed to the abundant oxygen vacancies, surface hydroxyl groups, zero-valent cobalt sites and high electronic conductivity. The degradation pathways were proposed based on the detection of degradation intermediates of ATZ by UPLC-MS. Moreover, the toxic of ATZ during the oxidation was evaluated by TEXT and E. coli inhibition assay. This work comprehensively analyzed the catalytic reaction mechanism of the H-Co/PMS system and provided a feasible pathway for the treatment of the actual livestock and poultry breeding wastewater., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The presence of herbicides like Atrazine (ATZ) in groundwater from non-target runoff of the agriculture industry becomes a big concern due to its potential negative impacts on the environment and human health. The use of advanced oxidative processes (AOP) to remove harmful contaminants has been shown to be effective for wastewater treatment. Herein, we report on an advanced photoelectrochemical (PEC) approach based on electrochemically modified nanoporous TiO 2 electrode for efficient degradation of ATZ. The electrochemical treated TiO 2 electrodes were shown to have a six-fold increase in the photo-current density over the untreated ones. This increase in PEC activity was attributed to the increase in Ti 3+ sites after the electrochemical modification, which was corroborated by low-temperature electron paramagnetic resonance (EPR) studies. The removal of ATZ by the PEC process resulted in a rate constant of 1.91 × 10 -3 s -1 , compared to 3.12 × 10 -4 s -1 obtained by a strictly photocatalytic process. Liquid-Chromatography Mass-Spectrometric measurements showed the modified TiO 2 electrodes highly effective at removing ATZ, with 96.1% removed after 10 h. Monitoring of the common degradation products desethyl atrazine (DEA), desisopropyl atrazine (DIA) and desethyl desisopropyl atrazine (DDA) revealed very low concentrations throughout the degradation process, indicating that further degradation was achieved. Quantum mechanical-based test for overall free radical scavenging activity (QM-ORSA) computational studies were performed and a mechanism for the N-dealkylation processes of ATZ has been proposed., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Quinones are potential pollutants and redox active compounds widely distributed in environmental media. In this study, methyl-p-benzoquinone (MBQ) was introduced into Fe(III)/peroxydisulfate system (Fe(III)/PDS) to expedite the conversion of Fe(III) to Fe(II) and the degradation of atrazine (ATZ), ultimately establishing an environmentally friendly system of "treating pollution with pollution". MBQ/Fe(III)/PDS system showed superior performance to traditional Fe(II)/PDS system in pH range of 2-7. Sulfate radical (SO 4 •- ) and hydroxyl radical ( • OH) were confirmed to exist in MBQ/Fe(III)/PDS system according to alcohol quenching experiments and ESR tests. Meanwhile, stable 80% of η[PMSO 2 ] (i.e., the molar ratio of PMSO 2 generation to PMSO consumption) was achieved and manifested that highly reactive substance Fe(IV) also participated in MBQ/Fe(III)/PDS system. The spontaneous transformation of MBQ and methyl-hydroquinone (MHQ) drove Fe(III)/Fe(II) cycle, during which MHQ induced Fe(III) reduction and Fe(II) regeneration. Transformation pathways of ATZ were proposed based on HPLC-MS detection and DFT calculation and ATZ degradation could be initiated by lateral chain oxidation and dechlorination-hydroxylation. The acute toxicity, bioaccumulation factor, developmental toxicity and mutagenicity of ATZ and its degradation intermediates were evaluated by Toxicity Estimation Software Tool, and the luminescent bacteria test was conducted to investigate the acute toxicity variation of the reaction solution. Cl - obviously inhibited ATZ degradation and three main by-products generation, while humic acid (HA) had little effect on them probably due to the established balance between inhibition (some components in HA competed to consume reactive species) and acceleration (quinone units in HA also facilitated Fe(III)/Fe(II) cycle)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Soil organic matter (SOM) and its heterogeneous nature constitutes the main factor determining the fate and transformation of organic chemicals (OCs). Thus, the aim of thus research was to analyze the influence of the molecular chemodiversity of a stable SOM (S-SOM) on the sorption potential of different groups of OCs (organochloride pesticides—OCPs, and non-chlorinated pesticides—NCPs, polycyclic aromatic hydrocarbons—PAHs). The research was conducted as a batch experiment. For this purpose, a S-SOM was separated from six soils (TOC = 15.0−58.7 gkg−1; TN = 1.4−6.6 gkg−1, pH in KCl = 6.4−7.4 and WRB taxonomy: fluvisols, luviosols, leptosols) by alkaline urea and dimethylsulphoxide with sulfuric acid. Isolated S-SOM fraction was evaluated by UV−VIS, FT-IR and EEM spectroscopy to describe molecular diversity, which allowed the assessment of its potential sorption properties regarding OCs. In order to directly evaluate the sorption affinity of individual OCs to S-SOM, the mixture of the 3 deuterated contaminants: chrysene (PAHs), 4,4′DDT (OCPs) atrazine (NCPs) were applied. The sorption experiment was carried out according to the 106 OECD Guidelines. The OCs concentration was analyzed by gas chromatography triple mass spectrometry (GC-MS/MS). OCs were characterized by different sorption rates to S-SOM fractions according to the overall trend: atrazine (87.5−99.9%) > 4,4′DDT (64−81.6%) > chrysene (35.2−79.8%). Moreover, atrazine exhibited the highest saturation dynamic with fast bounding time amounting to 6 h of contact with S-SOM. Proportionally, the chrysene showed the slowest binding time achieving an average of 55% sorption after 78 h. Therefore, S-SOM isolated from different soils demonstrated varying binding capacity to OCs (CoV = 21%, 27% and 33% for atrazine, DDT and chrysene, respectively). Results indicate that each sample contains S-SOM with different degrees of transformation and sorption properties that affect the OCs availability in soil. Spectroscopic analyses have shown that the main component of S-SOM are biopolymers at various stages of transformation that contain numerous aromatic−aliphatic groups with mostly hydrophilic substituents.

The catalytic ozonation-based advanced oxidation process (AOP) is applied to remove nondegradable chemical oxygen demand (COD), while the application in industry is limited by the economics and activity of catalysts. In this study, we demonstrate that by taking atrazine (ATZ) as a model pollutant, the removal rates of catalytic ozonation were negatively correlated with the interlayer water content of metal-modified montmorillonite (M x @MMT), instead of the loadings metals. Among the modified MMT, Zn 0.1 @MMT achieved 83.2% degradation of ATZ within 15 min, and corresponding removal rates of COD and total organic carbon (TOC) reached 40.3% and 46.5%, respectively. Detailed EPR and quenching experiments identified that hydroxyl radicals (HO•) were the main reactive oxygen species and QTOF/MS/MS analysis helped to propose a possible degradation pathway of ATZ. Moreover, the catalytic performance of Zn 0.1 @MMT under different conditions was also systematically evaluated., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

High resolution mass spectrometry (HRMS) was coupled with ultra-high-performance liquid chromatography (uHPLC) to monitor atrazine (ATZ) degradation process of Fenton/ultrasound (US) treatment in real time. Samples were automatically taken through a peristaltic pump, and then analysed by HPLC-HRMS. The injection in the mass spectrometer was performed every 4 min for 2 h. ATZ and its degradation metabolites were sampled and identified. Online Fenton experiments in different equivalents of Fenton reagents, online US experiments with/without Fe 2+ and offline Fenton experiments were conducted. Higher equivalents of Fenton reagents promoted the degradation rate of ATZ and the generation of the late-products such as Ammeline (AM). Besides, adding Fe 2+ accelerated ATZ degradation in US treatment. In offline Fenton, the degradation rate of ATZ was higher than that of online Fenton, suggesting the offline samples were still reacting in the vial. The online analysis precisely controls the effect of reagents over time through automatic sampling and rapid detection, which greatly improves the measurement accuracy. The experimental set up proposed here both prevents the degradation of potentially unstable metabolites and provides a good way to track each metabolite.

The inclusion of warm-season grasses, such as switchgrass (Panicum virgatum) and eastern gamagrass (EG) (Tripsacum dactyloides), in vegetated buffer strips has been shown to mitigate herbicide contamination in runoff and increase herbicide degradation in soil. The mode of action by which buffer strip rhizospheres enhance herbicide degradation remains unclear, but microorganisms and phytochemicals are believed to facilitate degradation processes. The objectives of this study were to: 1) screen root extracts from seven switchgrass cultivars for the ability to degrade the herbicide atrazine (ATZ) in solution; 2) determine sorption coefficients (K d ) of the ATZ-degrading phytochemical 2-β-D-glucopyranosyloxy-4-hydroxy-1,4-benzoxazin-3-one (DBG) to soil and Ca-montmorillonite, and investigate if DBG or ATZ sorption alters degradation processes; and 3) quantify ATZ degradation rates and soil microbial response to ATZ application in mesocosms containing soil and select warm-season grasses. Phytochemicals extracted from the roots of switchgrass cultivars degraded 44-85% of ATZ in 16-h laboratory assays, demonstrating that some switchgrass cultivars could rapidly degrade ATZ under laboratory conditions. However, attempts to isolate ATZ-degrading phytochemicals from plant roots were unsuccessful. Sorption studies revealed that DBG was strongly sorbed to soil (K d  = 87.2 L kg -1 ) and Ca-montmorillonite (K d  = 31.7 L kg -1 ), and DBG driven hydrolysis of ATZ was entirely inhibited when either ATZ or DBG were sorbed to Ca-montmorillonite. Atrazine degradation rates in mesocosm soils were rapid (t 0.5  = 8.2-11.2 d), but not significantly different between soils collected from the two switchgrass cultivar mesocosms, the eastern gamagrass cultivar mesocosm, and the unvegetated mesocosm (control). Significant changes in three phospholipid fatty acid biomarkers were observed among the treatments. These changes indicated that different ATZ-degrading microbial consortia resulted in equivalent ATZ degradation rates between treatments. Results demonstrated that soil microbial response was the dominant mechanism controlling ATZ degradation in the soil studied, rather than root phytochemicals., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022. Published by Elsevier Ltd.)

This work reports the radicals detected and identified during the degradation of atrazine in methanol medium in the presence and absence of different proportions of water (0%, 5%, and 10%). The determination of these radicals is an important step to understand the electrolysis processes in methanol medium and contribute to clarify the degradation mechanism. Furthermore, the parameters for the successful removal of the contaminant were optimized and the results showed that the application of the technique led to the removal of nearly 99.8% of atrazine after 1 h of electrolysis. The oxidation kinetics was found to be very fast and most of the atrazine molecule in the medium was degraded in the first hour of electrolysis. The results obtained from a thorough analysis conducted with a view to evaluating the effects of different current densities and initial pH values on atrazine degradation showed that the application of higher current densities resulted in lower energy consumption, as this led to faster removal of atrazine. Additionally, the initial pH of the solution was found to favor the formation of different species of active chlorine. The radicals formed during the electro-oxidation process were detected by electron paramagnetic resonance spectroscopy and include hydroxyl, methoxy and hydroxymethyl. The use of methanol for the degradation of pollutants is a highly promising technique and this work shows that the identification of the different radicals formed in the process can be the key to understanding the degradation mechanism., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Artur de Jesus Motheo reports financial support was provided by State of Sao Paulo Reuter Foundation. William Santacruz reports financial support was provided by Coordination of Higher Education Personnel Improvement. Isabela Fiori reports financial support was provided by Coordination of Higher Education Personnel Improvement. Rodrigo de Mello reports financial support was provided of Sao Paulo Reuter Foundation., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

KOH-activated N-doped hydrochar (KHCN) was synthesized via co-activation method to eliminate atrazine (AT) in water efficiently. Compared to primitive HC, KHCN had advantages of splendid specific surface area (1205.82 m 2 /g) and developed microsphere structures on the surface. Specially for KHCN, the extra melamine added strengthened and preserved partial structure of polar oxygen-containing groups that were decomposed in the process of pore making. Besides, the estimated uptake amount of AT onto KHCN (216.50 mg/g) was remarkably superior to KHC (114.25 mg/g). KHCN exhibited the pH-dependence for AT removal, and presented excellent uptake capacity at a relatively neutral environment. Notably, the proposed mechanisms for AT removal by KHCN included electrostatic attraction, pore filling, π-π EDA, H-bond as well as hydrophilic effect. Hence, the porous N-doped hydrochar was a kind of adsorbent which was easy to prepare and had the application prospect for AT removal in natural water., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

In this study, natural molybdenite (MoS 2 ) was applied to activate peroxymonosulfate (PMS) for the removal of atrazine (ATZ) and its degradation mechanism was investigated. Molybdenite exhibits superior catalytic performance. The best condition for atrazine degradation efficiency (>99%) was obtained with molybdenite concentration of 0.4 g/L, PMS concentration of 0.1 mM, and ATZ concentration of 12 μM within 10 min under experimental conditions. Electron paramagnetic resonance (EPR) test and chemical probe test further proved that HO • and SO 4 •- played important roles in the molybdenite/PMS system, and SO 4 •- was dominant. Meanwhile, Electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS) tests showed that sulfur vacancies and edge sulfur played important roles in the system. Edge sulfur was conducive to Mo 4+ exposure, while sulfur vacancy facilitated electron transfer and reduced Mo 6+ back to Mo 4+ . Combined with DFT calculation, the role of sulfur in the degradation process was verified. Besides, five ATZ degradation pathways were proposed. Finally, the degradation ability of the molybdenite/PMS system for different pollutants and in actual water bodies was also explored. This work provided ideas for exploring the degradation of organic contaminants by natural minerals., (Copyright © 2022. Published by Elsevier B.V.)

In this work, novel atrazine (ATZ) molecularly imprinted nanofibrous membranes (A-MNMs) with a molecular organic framework (MOF)-based viscid bead structure were developed based on a natural spider-web-inspired strategy for selective separation of ATZ. Poly(vinylidene fluoride)/poly(vinyl alcohol) (PVDF/PVA) blended nanofibrous membranes as the basal membrane were synthesized by electrospinning technology combined with a chemical cross-linking procedure. The most critical design is that MOF nanocrystals as the matrix of the viscid bead structure were assembled on the PVDF/PVA blended nanofibrous membrane surface and the specific recognition sites were efficiently constructed on the surface and pores of the MOF-based viscid bead structure by a surface imprinting strategy. Significantly, the as-synthesized MOF-based viscid bead structure has an enhanced specific surface area, which helps to form abundant specific recognition sites in A-MNMs. Therefore, the A-MNMs with a spider-web-like structure presented an enhanced rebinding capacity (37.62 mg g -1 ) and permselectivity (permselectivity factors β were 4.21 and 4.31) toward ATZ. Moreover, the A-MNMs display strong practicability in separation of ATZ from simulated environmental water samples. The presented work has shown tremendous potential for preparing natural spider-web-like molecularly imprinted membranes (MIMs) for selective separation of environment pollutants.

The Chinese Yam (Dioscorea opposita) is cultivated widely in China. However, there are potential safety risks associated with herbicide residues in Chinese Yam because of its characteristics and unregulated use of pesticides. We developed an efficient sample preparation technique for simultaneous analysis of atrazine and its degradation products in Chinese Yam using accelerated solvent extraction and pipette tip solid-phase extraction followed by UPLC-DAD analysis. Molecularly imprinted polymer (MIP) were used as the adsorbent material. Method performance was evaluated and our results showed the limit of quantification was 1-3 μg/ kg, with recoveries in the range 79.2-103.8%. When compared with other methods, this method provided superior performance in terms of sensitivity, accuracy, and precision. This method is, therefore, expected to be useful in supervised residue analysis., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The present study developed an analytical technique to investigate the possible covalent adduct formation of albumin with the herbicide atrazine, and to characterize the protein modifications in vitro using liquid chromatography separation coupled with high resolution time-of-flight mass spectrometry (LC-TOF-MS). Tandem mass spectrum analysis (MS/MS) with collision induced dissociation (CID) revealed the specific sites of rat, human and bovine serum albumin adduct with atrazine. The formation of b-ion, y-ion series in MS/MS showed a covalent adduct with an addition mass of 179.1 Da located on Cys-34 of serum albumin from rats, human and bovine. This clearly indicated that the chemical group C 8 H 13 N 5 forms an adduct with Cys-34 despite the sequences differences between of rat, human and bovine serum albumin. To confirm the method reliability, concentration-dependent and time-dependent formation of adducts between serum albumins and atrazine were also investigated. Our results confirmed that atrazine can directly react with Cys-34 of serum albumin and form covalent adducts without prior metabolism., (Crown Copyright © 2020. Published by Elsevier B.V. All rights reserved.)

Atrazine residue in soil is one of the serious environmental problems and continues to risk ecosystem and human health. To address the environmental behaviors and dissipation of atrazine and better manage the application of atrazine in reality, we comprehensively investigated the adsorption and desorption, migration ability, and vanishing of atrazine in three distinct soils in China including Jiangxi (JX, pH 5.45, TOC 0.54%), Nanjing (NJ, pH 6.15, TOC 2.13%), and Yancheng (YC, pH 8.60, TOC 0.58%) soils. The atrazine adsorptive capacity to the soils was arranged in the order of NJ > YC > JX. The leaching assay with profiles of the soils showed strong migration, suggesting it had a high bioavailability to weeds and potential for underground water contamination. We further investigated the effects of environmental factors such as soil moisture, microbial activity and photolysis on atrazine degradation and showed that the degradation of atrazine in the soil mainly underwent the abiotic process, most likely through hydrolysis and photolysis-mediated mechanisms, and to less extend through soil microbial catabolism. Using HRLC-Q-TOF-MS/MS and by comparing the measured and theoretical m/z values and fragmentation data, ten metabolites comprising eight degraded products and two conjugates were characterized. Atrazine existing in the soils and sprayed coordinately blocked the growth of three common weeds, which prompted us to use the minimal atrazine in practice to control the waste of the pesticide and its impact on the environment. Overall, our work provided an insight into the mechanisms for the degradation of atrazine residues in the soils and contributed to the environmental risk assessment of the pesticide and management in its application control in the crop rotation and safe production., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The present study demonstrated atrazine detoxification by intracellular crude enzyme extracts of Pseudomonas spp. strains ACB and TLB. Indigenous bacterial protein-based remediation techniques could be an alternative to bioaugmentation which pose multiple challenges when applied to the field. Intracellular enzymes were extracted from strains ACB and TLB and their degradation potential of 10 mg L -1 was determined using Gas Chromatography; further, enzyme extracts were subjected to protein profiling studies. In span of 6 h, enzyme extracts of strain ACB showed maximum degradation at 30 °C and 40 °C (71%) and enzyme extracts of strain TLB showed maximum degradation at 40 °C (48%). Atrazine degradation by enzyme extracts of strain ACB showed maximum degradation at pH 7 (71%) and pH 6 (69%) in 6 h. Similarly, enzyme extracts of strain TLB showed maximal degradation at pH 6 (46%) in 6 h. The present study demonstrated, for the first time, efficient atrazine remediation by intracellular crude enzyme extracts from epiphytic root bacteria at a range of temperature and pH conditions. Protein profiling studies indicated that atrazine induced expression of CoA ester lyase and alkyl hydroperoxide reductase in the strains ACB and TLB respectively. Expressions of these proteins have never been associated with atrazine exposure.

Developing low-cost, high-efficiency catalysts for advanced oxidation processes remain a key issue for the degradation of organic pollutants. In this study, a novel FeCo 2 O 4 /rectorite composite was synthesized via a facile combustion process and employed to activate peroxymonosulfate (PMS) for dealing with atrazine (ATZ). The addition of rectorite could result in higher specific surface area, smaller pore size and more hydroxyl groups, which were beneficial to enrich pollutants to the adsorption sites and provide sufficient reactive sites. After meticulous evaluation, the degradation efficiency of FeCo 2 O 4 /rectorite composite towards ATZ exhibited improved PMS activation efficiency which was about 2.6 times than that of pure FeCo 2 O 4 . Based on the characterization results, the sulfate radicals and hydroxyl radicals were considered to be the main free radicals which were involved into the circulation of Co(II)-Co(III)-Co(II) as well as the oxidation of ≡Fe(II), which was responsible for the remarkable catalytic efficiency. In addition, the chemical stability and superior catalytic performance of FeCo 2 O 4 /rectorite should also be attributed to the chemical combination between metal ions and the surface hydroxyl groups of rectorite. Overall, these findings are beneficial for understanding the mechanism of PMS activation by natural mineral-based catalysts and contributing to the practical application of sulfate-based technology for organic wastewater treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

In Brazil, the atrazine has been applied frequently to join with glyphosate to control resistant biotypes and weed tolerant species to glyphosate. However, there are no studies about atrazine's behavior in soil when applied in admixture with glyphosate. Knowledge of atrazine's sorption and desorption mixed with glyphosate is necessary because the lower sorption and higher desorption may increase the leaching and runoff of pesticides, reaching groundwaters and rivers. Thereby, the objective of this study was to evaluate the adsorption mechanisms of atrazine when isolated and mixed with glyphosate formulations in a Red-Yellow Latosol. The maximum adsorbed amount of atrazine in equilibrium (qe) was not altered due to glyphosate formulations. The time to reach equilibrium was shortest when atrazine was mixed with the Roundup Ready® (te = 4.3 hours) due to the higher adsorption velocity (k2 = 2.3 mg min-1) in the soil. The highest sorption of atrazine occurred when mixed with the Roundup WG®, with the Freundlich sorption coefficient (Kf) equal to 2.51 and 2.43 for both formulation concentrations. However, other glyphosate formulations did not affect the sorption of atrazine. The desorption of atrazine was high for all treatments, with values close to 80% of the initial adsorbed amount, without differences among isolated and mixed treatments. The change in the velocity and capacity of sorption for the atrazine mixed with some glyphosate formulations indicates that further studies should be conducted to identify the mechanisms involved in this process., Competing Interests: The authors have declared that no competing interests exist.

Declining rate of productivity and environmental sustainability is forcing growers to use organic manures as a source of nutrient supplement in maize farming. However, weed is a major constraint to maize production. A field study was carried out over two seasons to evaluate various integrated nutrient and weed management practices in hybrid maize. The treatment combinations comprised of supplementation of inorganic fertilizer (25% nitrogen) through bulky (Farmyard manure and vermicompost) and concentrated ( Brassicaceous seed meal (BSM) and neem cake (NC)) organic manures and different mode of weed management practices like chemical (atrazine 1000 g ha -1 ) and integrated approach (atrazine 1000 g ha -1 followed by mechanical weeding). Repeated supplementation of nitrogen through concentrated organic manures reduced the density and biomass accumulation of most dominant weed species, Anagalis arvensis by releasing allelochemicals into the soil. But organic manures had no significant impact on restricting the growth of bold seeded weeds like Vicia hirsuta and weed propagated through tubers i.e., Cyperus rotundus in maize. By restricting the weed growth and nutrient removal by most dominating weeds, application of BSM enhanced the growth and yield of maize crop. Repeated addition of organic manures (BSM) enhanced the maize grain yield by 19% over sole chemical fertilizer in the second year of study. Application of atrazine as pre-emergence (PRE) herbicide significantly reduced the density of A . arvensis , whereas integration of mechanical weeding following herbicide controlled those weeds which were not usually controlled with the application of atrazine. As a result, atrazine at PRE followed by mechanical weeding produced the highest maize grain yield 6.81 and 7.10 t/ha in the first year and second year of study, respectively.