Search

Pathogens cause various infectious diseases and high morbidity and mortality which is a global public health threat. The highly sensitive and specific detection is of significant importance for the effective treatment and intervention to minimise the impact. However, conventional detection methods including culture and molecular method gravely depend on expensive equipment and well-trained skilled personnel, limiting in the laboratory. It remains challenging to adapt in resource-limiting areas, e.g., low and middle-income countries (LMICs). To this end, low-cost, rapid, and sensitive detection tools with the capability of field testing e.g., a portable device for identification and quantification of pathogens, has attracted increasing attentions. Recently, paper-based microfluidic analytical devices (μPADs) have shown a promising tool for rapid and on-site diagnosis, providing a cost-effective and sensitive analytical approach for pathogens detection. The fast turn-round data collection may also contribute to better understanding of the risks and insights on mitigation method. In this paper, critical developments of μPADs for in-field detection of pathogens both for clinical diagnostics and environmental surveillance are reviewed. The future development, and challenges of μPADs for rapid and onsite detection of pathogens are discussed, including using the cross-disciplinary development with, emerging techniques such as deep learning and Internet of Things (IoT)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

Background: Total paper dust exposure has been associated with respiratory problems among workers in the soft tissue paper industry. However, a comprehensive job exposure matrix (JEM) has not been developed for application to this industry. Our study was intended to address this need and to support further studies of mortality and morbidity in a cohort of Swedish workers from this industry., Methods: We evaluated four participating soft tissue paper mills in Sweden. We combined information on process and equipment status from the mills with knowledge of the mills obtained through research efforts and paper dust measurements made at all four mills to develop a semi-quantitative JEM with seven dust exposure levels. The JEM was targeted at workers enrolled into a soft tissue paper mill cohort and working any time between 1960 and 2009., Results: The JEM includes a total of 14 421 cells, with each cell corresponding to the exposure for a job title, department, or work location for a one-year period. Exposure levels in the JEM were estimated to decline at three of the four mills from 1971 to 2009, but overexposures (ie, exceedances of the relevant occupational exposure limits) remained common at the end of the period., Conclusions: The JEM results highlight the need for ongoing exposure control efforts in the soft tissue paper industry, and will inform ongoing epidemiological studies of the health effects of exposure to paper dust in Sweden. It is freely available for use by other researchers., (© 2020 Wiley Periodicals, Inc.)

The fast detection of trace amounts of hazardous contaminations can prevent serious damage to the environment. Paper-based sensors offer a new perspective on the world of analytical methods, overcoming previous limitations by fabricating a simple device with valuable benefits such as flexibility, biocompatibility, disposability, biodegradability, easy operation, large surface-to-volume ratio, and cost-effectiveness. Depending on the performance type, the device can be used to analyze the analyte in the liquid or vapor phase. For liquid samples, various structures (including a dipstick, as well as microfluidic and lateral flow) have been constructed. Paper-based 3D sensors are prepared by gluing and folding different layers of a piece of paper, being more user-friendly, due to the combination of several preparation methods, the integration of different sensor elements, and the connection between two methods of detection in a small set. Paper sensors can be used in chromatographic, electrochemical, and colorimetric processes, depending on the type of transducer. Additionally, in recent years, the applicability of these sensors has been investigated in various applications, such as food and water quality, environmental monitoring, disease diagnosis, and medical sciences. Here, we review the development (from 2010 to 2021) of paper methods in the field of the detection and determination of toxic substances.

Pulp and paper industries emit various odorous gases during the pulp production and paper-making phase, which are unpleasant and have harmful effects on the human body. The working staffs are continuously exposed to these gases and develop various health issues. Hence, regular monitoring and analysis of such gases are necessary to avoid any sudden high concentration exposure and to prevent adverse health effects on the staff. An electronic nose (EN) has an array of gas sensors with an alert system for early detection of gases. Various ENs have been developed for varying applications till date. The detailed knowledge of the sensors used, their sensitivity and technology is helpful in development of any EN. The objective of this study is to comprehensively review various developed ENs with respect to their gas sensing and pattern recognition (PR) technologies. The information on gases released from pulp and paper industries is also compiled. The evolution of EN technology, its various applications, challenges in developing EN and its utility in safeguarding the industrial workers' life have been described. Further, gap analysis among previously developed EN, contemporary EN and wireless sensor network (WSN) is elaborated. It will facilitate future researchers for better selection of sensors and PR technologies while developing EN. The commonly used sensing technologies are described with their advantages, disadvantages and working principles. Metal oxide semiconductor (MOS) gas sensor and ANN algorithm show better result and hence recommended in the development of EN, whereas ZigBee protocol has been widely used for WSN., (© 2022. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

In this study, we investigated the airborne particles released during paper printing and paper shredding processes in an attempt to characterize and differentiate these particles. Particle characteristics were studied with real time instruments (RTIs) to measure concentrations and with samplers to collect particles for subsequent microscopy and cytotoxicity analysis. The particles released by paper shredding were evaluated for cytotoxicity by using in vitro human lung epithelial cell models. A substantial amount of particles were released during both the shredding and printing processes. We found that the printing process caused substantial release of particles with sizes of less than 300 nm in the form of metal granules and graphite. These released particles contained various elements including Al, Ca, Cu, Fe, Mg, N, K, P, S and Si. The particles released by the paper shredding processes were primarily nanoparticles and had a peak size between 27.4 nm and 36.5 nm. These paper particles contained elements including Al, Br Ca, Cl, Cr, Cu, Fe, Mg, N, Na, Ni P, S and Si, as determined by scanning electron microscope-energy dispersive X-ray spectroscopy (SEM-EDS) and single-particle inductively coupled plasma-mass spectroscopy (SP-ICP-MS) analysis. Although various metals were identified in the paper particles, these particles did not elicit cytotoxicity to simian virus-transformed bronchial epithelial cells (BEAS2B) and immortalized normal human bronchial epithelial cells (HBE1). However, future studies should investigate other cytotoxicity effects of these paper particles in various types of lung cells to identify potential health effects of the particles.

Environmental toxic pollutants and pathogens that enter the ecosystem are major global issues. Detection of these toxic chemicals/pollutants and the diagnosis of a disease is a first step in efficiently controlling their contamination and spread, respectively. Various analytical techniques are available to detect and determine toxic chemicals/pathogens, including liquid chromatography, HPLC, mass spectroscopy, and enzyme-linked immunosorbent assays. However, these sensing strategies have some drawbacks such as tedious sample pretreatment and preparation, the requirement for skilled technicians, and dependence on large laboratory-based instruments. Alternatively, biosensors, especially paper-based sensors, could be used extensively and are a cost-effective alternative to conventional laboratory testing. They can improve accessibility to testing to identify chemicals and pollutants, especially in developing countries. Due to its low cost, abundance, easy disposal (by incineration, for example) and biocompatible nature, paper is considered a versatile material for the development of environmentally friendly electrochemical/optical (bio) sensor devices. This review presents an overview of sensing platforms constructed from paper, pointing out the main merits and demerits of paper-based sensing systems, their fabrication techniques, and the different optical/electrochemical detection techniques that they exploit.

Many lanthanide ions-based probes have been widely used for detecting anthrax spores biomarker-dipicolinic acid (DPA). However, little work has realized detection of bacillus anthrax spores in real environmental samples. In this work, a novel ratiometric fluorescent nanoprobe based on europium (Eu)-doped silicon nanoparticles (Eu@SiNPs) was fabricated for the first time by one-pot method without post-modification for determination of the DPA in bacillus subtilis spores (simulant bacillus anthrax spores). Based on Eu(III) in the Eu@SiNPs could be sensitized by DPA to emit intrinsic fluorescence and the fluorescence intensity of SiNPs in the Eu@SiNPs almost remained stable, a new ratiometric fluorescent method for determination of micro DPA in bacillus subtilis spores and bacillus subtilis spores in real environmental samples, such as Yellow river water, tap water and soil was established. Under the optimum conditions, the limit of detection (LOD) of the method toward bacillus subtilis spores was as low as 2.38×10 4 spore/mL. Simple, fast and visual DPA and bacillus subtilis spores determination was also achieved by the Eu@SiNPs-based test paper. Therefore, the newly established method was expected to be a powerful tool for efficiently determination of bacillus anthrax spores to avoid anthrax threats., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In response to growing environmental concerns, the scientific community is increasingly incorporating green chemistry principles into modern analytical techniques. Electrochemical paper-based analytical devices (ePADs) have emerged as a sustainable and efficient alternative to conventional analytical devices, offering robust applications in point-of-care testing, personalized healthcare, environmental monitoring, and food safety. ePADs align with green chemistry by minimizing reagent use, reducing energy consumption, and being disposable, making them ideal for eco-friendly and cost-effective analyses. Their user-friendly interface, alongside sensitive and selective detection capabilities, has driven their popularity in recent years. This review traces the evolution of ePADs from simple designs to complex multilayered structures that optimize analyte flow and improve detection. It also delves into innovative electrode fabrication methods, assessing key advantages, limitations, and modification strategies for enhanced sensitivity. Application-focused sections explore recent advancements in using ePADs for detecting diseases, monitoring environmental hazards like heavy metals and bacterial contamination, and screening contaminants in food. The integration of cutting-edge technologies, such as wearable wireless devices and the Internet of Things (IoT), further positions ePADs at the forefront of point-of-care testing (POCT). Finally, the review identifies key research gaps and proposes future directions for the field.

Copyright of Studies in Conservation is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This study firstly investigated the species, concentration variation, and emission factors of mercury emitted from the burning of incenses and joss papers in an Asian temple. Both indoor and outdoor speciated mercury (GEM, GOM, and PHg) were sampled by manual samplers, while ambient GEM at an indoor site was in-situ monitored by a continuous GEM monitor. Field measurement results showed that the total atmospheric mercury (TAM) concentrations in indoor and outdoor environments were in the range of 8.03-35.72 and 6.03-31.35 ng/m 3 , respectively. The indoor and outdoor ratios (I/O) of TAM in the daytime and at nighttime were in the range of 0.64-0.90 and 1.50-2.04, respectively. The concentrations of GEM, GOM, and PHg during the holiday periods were approximately 1-4 times higher than those during the non-holiday periods. GEM was the dominant mercury species in the indoor and outdoor environments and accounted for 63-81% of TAM, while the oxidized mercury accounted for 19-37% of TAM. Burning incenses and joss papers in a combustion chamber showed that the concentration of GEM from joss paper burning ranged from 4.07 to 11.62 μg/m 3 , or about 13.97 times higher than that of incense burning, while the concentration of PHg from incense burning ranged from 95.91 to 135.07 ng/m 3 , or about 3.29 times higher than that of joss paper burning. The emission factors of incense burning were 10.39 ng/g of GEM and 1.40 ng/g of PHg, while those of joss paper burning were 12.65 ng/g of GEM and 1.27 ng/g of PHg, respectively. This study revealed that speciated mercury emitted from worship activities had significant influence on the indoor and outdoor mercury concentrations in an Asian temple. Higher intensity of worship activities during holidays resulted in a higher concentration of speciated mercury in indoor and outdoor air, which might cause health threats to worshipers, staffs, and surrounding inhabitants through long-term exposure., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Various strategies have been proposed for the sensing of acetylcholinesterase (AChE) activity and organophosphorus pesticides (OPs). However, the practical application of most methods is restricted by their intrinsic drawbacks such as complexity, long analysis time, and high cost. Thus, it is highly desirable to develop simple, fast and sensitive approaches for AChE activity and OPs detection. Herein, we reported a simple paper-based fluorescent sensor (PFS) based on the aggregation induced emission (AIE) effect of tetraphenylethylene (TPE) and the addition reaction capability of maleimide, which has been used as a powerful tool for rapid naked-eye detection of AChE activity and OPs. The introduction of TPE provides the probe with unique fluorescence property in solid state and is of great importance for improving the sensitivity of PFS. The hydrolysis product of acetylthiocholine catalyzed by AChE induced the maleimide ring destruction and activated the fluorescence performance of TPE. Given that AChE activity can be specifically inhibited by OPs, the as-proposed PFS can also be utilized for sensitive detection of OPs. Meanwhile, the variation of fluorescence signal can be readily detected by naked eyes, and low detection limits of 2.5mUmL(-1) and 0.5ngmL(-1) for AChE activity and OPs are obtained, respectively. Moreover, it has been successfully applied for AChE activity and OPs detection in diluted human serum samples, showing its great potential to be applied in real samples. Thus, this strategy possesses considerable advantages of simplicity, rapid detection, portability, cost efficiency and visualization., (Copyright © 2016 Elsevier B.V. All rights reserved.)

This paper quantitatively investigates the compositions of the gaseous pollutants in the ambient air of a secondary fiber paper mill. Total volatile organic compounds (TVOC), formaldehyde (HCHO), sulfur compounds (H2S), and hydrocarbon compounds (CxHy) were analyzed on six sampling sites with photo-ionisation detector, acetylacetone spectrophotometric method, and gas detector. The results revealed that, the high levels of TVOC and CxHy were detected at the wet end of paper machine and the office area, respectively; all the H2S contents on the six sites exceeded the limit (0.06 mg m(-3)) seriously; the HCHO concentrations at other five sites were out of the limit (0.10 mg m(-3)) except for the wastewater treatment plant. Furthermore, the necessary discussions about the possible pollution sources were considered on the process flow, the chemical agents used, and the ambient conditions in the paper mill. For the sake of air pollution control in paper mills, these remarkable results and analysis lay some technical basis in the following researches that should attract more attentions.

Heavy metal pollution has shown great threat to the environment and public health worldwide. Current methods for the detection of heavy metals require expensive instrumentation and laborious operation, which can only be accomplished in centralized laboratories. Various microfluidic paper-based analytical devices have been developed recently as simple, cheap and disposable alternatives to conventional ones for on-site detection of heavy metals. In this review, we first summarize current development of paper-based analytical devices and discuss the selection of paper substrates, methods of device fabrication, and relevant theories in these devices. We then compare and categorize recent reports on detection of heavy metals using paper-based microfluidic devices on the basis of various detection mechanisms, such as colorimetric, fluorescent, and electrochemical methods. To finalize, the future development and trend in this field are discussed., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Volatile organic compound (VOC) detection is critical for controlling industrial and commercial emissions, environmental monitoring, and public health. Simple, portable, rapid and low-cost VOC sensing platforms offer the benefits of on-site and real-time monitoring anytime and anywhere. The best and most practically useful approaches to monitoring would include equipment-free and power-free detection by the naked eye. In this work, we created a novel, paper-based cantilever sensor array that allows simple and rapid naked-eye VOC detection without the need for power, electronics or readout interface/equipment. This simple VOC detection method was achieved using (i) low-cost paper materials as a substrate and (ii) swellable thin polymers adhered to the paper. Upon exposure to VOCs, the polymer swelling adhered to the paper-based cantilever, inducing mechanical deflection that generated a distinctive composite pattern of the deflection angles for a specific VOC. The angle is directly measured by the naked eye on a 3-D protractor printed on a paper facing the cantilevers. The generated angle patterns are subjected to statistical algorithms (linear discriminant analysis (LDA)) to classify each VOC sample and selectively detect a VOC. We classified four VOC samples with 100% accuracy using LDA., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Purpose: As an essential component of polycarbonate plastics and epoxy resins, Bisphenol A (BPA) is found in numerous industrial and consumer products. BPA may cause adverse health effects because of its endocrine activity. General population exposure to this compound mainly through diet is well documented. Thermal paper was also identified as a source of BPA through dermal intake. In this study, we investigated whether frequent contact with thermal paper is associated with an increase in urinary BPA excretion., Methods: We evaluated the exposure to BPA in cashiers and in non-occupationally exposed workers from several workplaces. Urinary BPA was quantified in free (unconjugated) and total (unconjugated plus conjugated) forms in 24-h and spot urine samples using LC-MS/MS. BPA concentration in thermal paper was also measured from each workplace. In addition, participants provided information on job, food and drink, tobacco consumption and hands wash during the sampling period through a questionnaire., Results: Urine samples were collected from 90 cashiers and 44 controls. Free and total BPA were detected in all samples. The median urinary total BPA concentration was 3.54 µg/L (2.89 µg/g creatinine) for controls and 8.92 µg/L (6.76 µg/g creatinine) for cashiers. For the free BPA, the median urinary concentration was 0.20 µg/L (0.21 µg/g creatinine) for controls and 0.28 µg/L (0.22 µg/g creatinine) for cashiers. Any correlation was found between the urinary concentration levels and the number of thermal receipts handled. Hand washes frequency, age, job length of service and tobacco consumption had also no effect on the BPA excretions., Conclusion: A significant increase in urinary total BPA concentration was observed for cashiers handling daily thermal paper receipts. However, no significant increase was observed in urinary free BPA concentration. These findings are particularly interesting for risk assessment since all available data on occupational exposure to BPA through thermal paper were obtained from models or from simulated experiments.

The total emission control target of water pollutants (e.g., COD and NH4-N) for a certain industrial sector can be predicted and analysed using the popular technology-based bottom-up modelling. However, this methodology has obvious uncertainty regarding the attainment of mitigation targets. The primary uncertainty comes from macro-production, pollutant reduction roadmap, and technical parameters. This research takes the paper and pulp industry in China as an example, and builds 5 mitigation scenarios via different combinations of raw material structure, scale structure, procedure mitigation technology, and end-of-pipe treatment technology. Using the methodology of uncertainty analysis via Monte Carlo, random sampling was conducted over a hundred thousand times. According to key parameters, sensitive parameters that impact total emission control targets such as industrial output, technique structure, cleaner production technology, and end-of-pipe treatment technology are discussed in this article. It appears that scenario uncertainty has a larger influence on COD emission than NH4-N, hence it is recommended that a looser total emission control target for COD is necessary to increase its feasibility and availability while maintaining the status quo of NH4-N. Consequently, from uncertainty analysis, this research recognizes the sensitive products, techniques, and technologies affecting industrial water pollution., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

The safe disposal of pulp and paper mill effluent is still a threat to the environment due to the presence of several unknown organic pollutants. The comparative physico-chemical analysis of pulp and paper mill effluent-contaminated sediment (PPECS) of site 1 and site 2 showed that the sediment had an alkaline nature and was loaded with several organic pollutants and heavy metals. SEM-EDX examination showed a porous structure with a heterogeneous distribution of particles, allowing the adsorption of metal and other complex organic ions. FTIR analysis depicted the presence of a variety of functional groups, i.e., alkyl halides, phenolics, and lignin, in the contaminated sediment. GC-MS analysis showed the major presence of organic pollutants, i.e., 2-methyl-4-keto-2-pentan-2-ol and 3,7-dioxa-2,8-disilanonane,2,2,8,8-tetramethyl-5-[(trimethylsilyl)oxy], in the site 1 sediment contaminated with pulp and paper mill waste, while 2-methyl-4-keto-2-trimethylsiloxypentane, 4-ethyl-2-methoxyphenol, ethyl-2-octynoate, cis-9-hexadecenoic acid, and octadecenoic acid were detected in the site 2 sediment contaminated with pulp and paper mill waste. The genotoxicity of PPECS determined by examining Allium cepa root cell division showed chromosomal aberration. In this study, several compounds that have not been reported before were identified.

Objectives: Noise exposure is a common occupational hazard, but has not been sufficiently characterized in paper mills. We developed a job-exposure matrix (JEM) for noise exposure for use in estimating exposures among Swedish soft tissue paper mill workers., Methods: We used a combination of area and personal dosimetry noise exposure measurements made at four soft tissue paper mills by industry and research staff between 1977 and 2013 to estimate noise exposures by department, location, and job title. We then utilized these estimates, in conjunction with information on process and facility changes and use of hearing protection collected via focus groups, to create a seven-category, semi-quantitative JEM for all departments, locations, and job titles spanning the years 1940-2010., Results: The results of the 1157 area and personal dosimetry noise measurements indicated that noise levels have generally declined in Swedish paper mills over time, though these changes have been neither uniform nor monotonic within or across the four mills. Focus group results indicated that use of hearing protection has generally increased over time. The noise JEM totals 1917 cells, with each cell representing a unique combination of operation, job title, and single year. We estimated that ~50% of workers at the four mills assessed were exposed at or above the Swedish 8-h average noise exposure limit of an 85 dBA at the conclusion of the study period in 2010., Conclusions: Our results highlight the continuing need for hearing loss prevention and noise control efforts at these and similar mills, and the completed JEM now represents a tool for use in epidemiological studies of noise-related health outcomes., (© The Author(s) 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.)

This manuscript offers a concise overview of paper microfluidics, emphasizing its sustainable sensing applications in healthcare, environmental monitoring, and food safety. Researchers have developed innovative sensing platforms for detecting pathogens, pollutants, and contaminants by leveraging the paper's unique properties, such as biodegradability and affordability. These portable, low-cost sensors facilitate rapid diagnostics and on-site analysis, making them invaluable tools for resource-limited settings. This review discusses the fabrication techniques, principles, and applications of paper microfluidics, showcasing its potential to address pressing challenges and enhance human health and environmental sustainability. [ABSTRACT FROM AUTHOR]

Communities across Canada rely heavily on natural resources for their livelihoods. One such community in Pictou County, Nova Scotia, has both benefited and suffered, because of its proximity to a pulp and paper mill (currently owned by Northern Pulp). Since production began in 1967, there have been increasing impacts to the local environment and human health. Environmental reports funded by the mill were reviewed and compared against provincial and federal regulatory compliance standards. Reports contrasted starkly to societal perceptions of local impacts and independent studies. Most environmental monitoring reports funded by the mill indicate some levels of compliance in atmospheric and effluent emissions, but when compliance targets were not met, there was a lack of regulatory enforcement. After decades of local pollution impacts and lack of environmental compliance, corporate social responsibility initiatives need implementing for the mill to maintain its social licence to operate.

In this paper we describe a combination of paper-based sensors and a novel smart-phone application for on-site quantification of colorimetric readouts as an ultra-low cost solution to monitoring water quality. The system utilizes a paper-based analytical device (μPAD) that produces a colorimetric signal that is dependent on the concentration of a specific target; a cell phone equipped with a camera for capturing images of two μPADs - one tested with a water sample and the other tested with clean water that is used as a control; and an on-site image processing app that uses a novel algorithm for quantifying color intensity and relating this to contaminant concentration. The cell phone app utilizes a pixel counting algorithm that performs with less bias and user subjectivity than the typically used lab-based software, ImageJ. The use of a test and control strip reduces bias from variations in ambient lighting, making it possible to acquire and process images on-site. The cell phone is also able to GPS tag the location of the test, and transmit results to a newly developed website, WaterMap.ca, that displays the quantitative results from the water samples on a map. We demonstrate our approach using a previously developed μPAD that detects the presence of organophosphate pesticides based on the inhibition of immobilized acetylcholinesterase by these contaminants. The objective of this paper is to highlight the importance and potential of developing and integrated monitoring system consisting of μPADs, cell-phones and a centralized web portal for low-cost monitoring environmental contaminants at a large-scale., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

The present study was carried out to evaluate the impact of the effluents and the solid wastes generated by a giant pulp and paper mill in the northeastern part of India on soil mineralogy of the area. The impacts were monitored by analysis of soil samples from seven sites located in the potential impact zone and a control site where any kind of effluent discharge or solid waste dumping was absent. The soil belonged to medium texture type (sandy clay loam, sandy loam, loamy sand, and silt loam), and the soil aggregate analysis indicated higher levels of organic carbon, pH, electrical conductivity, effective cation exchange capacity, and mean weight diameter at sites receiving effluents and solid wastes from the pulp and paper mill. Depletion in soil silica level and in feldspar and quartz contents and rise in iron and calcium contents at the sites receiving effluents from the pulp and paper mill indicated significant influence on soil mineralogy. The soil contained a mixture of minerals consisting of tectosilicates (with silicate frameworks as in quartz or feldspar), phylosilicates (layered clays like kaolinite, smectite, chlorite, illite, etc.), and carbonates. Absence of pure clay minerals indicated a state of heterogeneous intermediate soil clay transformation. The significance of the mixed mineralogy in relation to the disposal of effluents and dumping of solid wastes is discussed in details.

In recent years, paper-based point-of-care testing (POCT) has been widely used in medical diagnostics, food safety and environmental monitoring. However, a high-cost, time-consuming and equipment-dependent sample pretreatment technique is generally required for raw sample processing, which are impractical for low-resource and disease-endemic areas. Therefore, there is an escalating demand for a cost-effective, simple and portable pretreatment technique, to be coupled with the commonly used paper-based assay (e.g. lateral flow assay) in POCT. In this review, we focus on the importance of using paper as a platform for sample pretreatment. We firstly discuss the beneficial use of paper for sample pretreatment, including sample collection and storage, separation, extraction, and concentration. We highlight the working principle and fabrication of each sample pretreatment device, the existing challenges and the future perspectives for developing paper-based sample pretreatment technique.

This manuscript offers a concise overview of paper microfluidics, emphasizing its sustainable sensing applications in healthcare, environmental monitoring, and food safety. Researchers have developed innovative sensing platforms for detecting pathogens, pollutants, and contaminants by leveraging the paper’s unique properties, such as biodegradability and affordability. These portable, low-cost sensors facilitate rapid diagnostics and on-site analysis, making them invaluable tools for resource-limited settings. This review discusses the fabrication techniques, principles, and applications of paper microfluidics, showcasing its potential to address pressing challenges and enhance human health and environmental sustainability.

Copyright of Journal of Central China Normal University is the property of Huazhong Normal University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Perfluoroalkyl acids (PFAAs) are widely used as multi-purpose surfactants or water/oil repellents. In order to understand the contamination level and compositional profiles of PFAAs in aqueous environment in textile, leather, and paper making industrial areas, surface waters and tap waters were collected along the watershed of the Qiantang River where China's largest textile, leather, and paper making industrial bases are located. For comparison, surface water and tapwater samples were also collected in Hangzhou and its adjacent areas. 17 PFAAs were analyzed by solid phase extraction-high performance liquid chromatography-tandem mass spectrometry. The results show that the total concentrations of PFAAs (ΣPFAAs) in the Qiantang River waters ranged from 106.1 to 322.9 ng/L, averaging 164.2 ng/L. The contamination levels have been found to be extremely high, comparable to the levels of the most serious PFAA contamination in surface waters of China. The PFAA composition profiles were characterized by the dominant PFOA (average 58.1% of the total PFAAs), and PFHxA (average 18.8%). The ΣPFAAs in tap water ranged from 9.5 to 174.8 ng/L, showing PFAA compositional pattern similar to the surface waters. Good correlations between PFAA composition profiles in tap waters and the surface waters were observed., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

We have developed a simple, reversed-phase high-performance liquid chromatography (RP-HPLC) method for the determination of bisphenol A (BPA) in thermal paper cash register receipts (CRs). The method is suitable for analysis of other types of bisphenols and it involves an overnight extraction of CRs with acetonitrile (AN) at 50 °C followed by the HPLC analysis on a Supelcosil LC18 column (150 × 4.6 mm, particle size: 5 μ) using 50% AN in water as the mobile phase (5 min, isocratic). The composition of AN in the mobile phase changed to 100% over a 10 min period (linear gradient) and then held at 100% AN for 10 min (isocratic). The flow rate was set at 1 mL/min (injection volume: 20 μL) and the eluent was monitored at 234 nm. The authentic BPA eluted with a retention time of 5.9 min and gave a linear detector response in the concentration range of 0.23-50 mg/L. BPA in the CR extracts also eluted with the same retention and had identical absorbance properties as the standard. When CR extracts were co-injected with authentic BPA, they were resolved as a single peak. Further, GC/MS/EI analysis of authentic BPA and the HPLC-purified CR extracts have identical ion chromatograms and fragmentation of the molecular ion (m/z = 228). We have analyzed 170 CRs collected from 62 different vendors including supermarkets, fast food restaurants, gas stations and banking outlets. Almost all cash receipts (n = 168) showed the presence of BPA in the concentration range of 0.45-4.26% (M ± SD, 1.54 ± 0.73%).

Human access to safe water has become a major problem in many parts of the world as increasing human activities continue to spill contaminants into our water systems. To guarantee the protection of the public as well as the environment, a rapid and sensitive way to detect contaminants is required. In this work, a paper-based microbial fuel cell was developed to act as a portable, single-use, on-site water quality sensor. The sensor was fabricated by combining two layers of paper for a simple, low-cost, and disposable design. To facilitate the use of the sensor for on-site applications, the bacterial cells were pre-inoculated onto the device by air-drying. To eliminate any variations, the voltage generated by the microorganism before and after the air-drying process was measured and calculated as an inhibition ratio. Upon the addition of different formaldehyde concentrations (0%, 0.001%, 0.005%, and 0.02%), the inhibition ratios obtained were 5.9 ± 0.7%, 6.9 ± 0.7%, 8.2 ± 0.6%, and 10.6 ± 0.2%, respectively. The inhibition ratio showed a good linearity with the formaldehyde concentrations at R 2 = 0.931. Our new sensor holds great promise in monitoring water quality as a portable, low-cost, and on-site sensor.

In response to growing environmental concerns, the scientific community is increasingly incorporating green chemistry principles into modern analytical techniques. Electrochemical paper-based analytical devices (ePADs) have emerged as a sustainable and efficient alternative to conventional analytical devices, offering robust applications in point-of-care testing, personalized healthcare, environmental monitoring, and food safety. ePADs align with green chemistry by minimizing reagent use, reducing energy consumption, and being disposable, making them ideal for eco-friendly and cost-effective analyses. Their user-friendly interface, alongside sensitive and selective detection capabilities, has driven their popularity in recent years. This review traces the evolution of ePADs from simple designs to complex multilayered structures that optimize analyte flow and improve detection. It also delves into innovative electrode fabrication methods, assessing key advantages, limitations, and modification strategies for enhanced sensitivity. Application-focused sections explore recent advancements in using ePADs for detecting diseases, monitoring environmental hazards like heavy metals and bacterial contamination, and screening contaminants in food. The integration of cutting-edge technologies, such as wearable wireless devices and the Internet of Things (IoT), further positions ePADs at the forefront of point-of-care testing (POCT). Finally, the review identifies key research gaps and proposes future directions for the field. [ABSTRACT FROM AUTHOR]

The relevance of pH assessment in clinical analysis, environmental and industrial control, has raised the demand for the development of portable, low cost and easy-to-use monitoring systems. This paper proposes a pH sensor printed on a paper support passivated with a solid-ink coating. The sensor exploits the pH sensitivity of a reduced graphene oxide functionalized with 3-(4-aminophenil)propionic acid. The sensor responded in the pH range [4], [10] and had a sensitivity of 46 mV/pH. Tests on human plasma and seawater proved this pH sensor to have similar performances than those of a commercial pH-meter with an uncertainty of 0.1 and 0.2 pH unit in plasma and seawater, respectively.

The U.S. states along the northern shores of the Gulf of Mexico have often been described as America's Energy Colony. This region is festooned with polluting industries, storage and waste disposal sites for toxic products, and a history of generally lax approaches to environmental public health and enforcement of regulations. This issue of New Solutions includes three interviews of groups and individuals who work for Environmental Justice in the Gulf Coast region. The interviewees provide key insights into the diverse cultural texture and social fabric of the Gulf. Their range of gulf locales and population groups embody different styles of engagement and different relationships to organizing, disseminating health and environmental risk information, and advocating for social and environmental justice. Similarities among their communities in terms of health and economic disparities, climate risks, and vulnerabilities lend credence to the idea of the Gulf as a regional Environmental Justice community.

Bimetallic Au@Ag nano-sea urchins (Au@Ag NSUs) functionalized with methimazole were synthesized and combined with paper tips as efficient surface-enhanced Raman scattering (SERS) substrates for ultrasensitive Cr(VI) detection. The redox reaction between methimazole and Cr(VI) ensured the reliability of quantitative Cr(VI) analysis. When droplets were continuously dropped on the tip of the paper, based on the gravity effect, the nanoparticles achieved enrichment at the front end of the tip, which further improved the sensitivity of detection. The detection limit is as low as 0.956 ng L−1, demonstrating its excellent performance in ultrarace Cr(VI) detection. Additionally, the SERS sensor was successfully applied to the detection of Cr(VI) in real water samples, such as lake water and tap water, indicating its wide application potential in environmental monitoring. This study not only provides an efficient and reliable new method for detecting Cr(VI) but also shows the great prospect of paper-based SERS sensors in practical applications. [ABSTRACT FROM AUTHOR]

Monitoring of biogenic sulfide is important because acid volatile sulfides (AVS) represent a reactive pool responsible for immobilization of toxic metals. We propose a new sulfide paper sensor method for semiquantitative determination of AVS in which developed color is compared to a reference chart. The method was validated against the ion-selective microelectrode and the purge-and-trap methods. For fieldwork, readings should fall within 1 to 10 μmoles S 2- . Considering that the volume of soil used ranged between 1 and 16 cm 3 , the corresponding soil sulfides concentration range spans from 0.06 to 10 mmoles S 2- cm -3 . The sulfide paper sensor method is highly suitable for field screening and has sensitivity levels comparable to laboratory methods. Environ Toxicol Chem 2018;37:3025-3031. © 2018 SETAC., (© 2018 SETAC.)

Using the standardized polyurethane foam unit (PFU) method, a preliminary investigation was carried out on the bioaccumulation and the ecotoxic effects of the pulp and paper wastewater for irrigating reed fields. Static ectoxicity test had shown protozoal communities were very sensitive to variations in toxin time and effective concentration (EC) of the pulp and paper wastewater. Shannon-Wiener diversity index (H) was a more suitable indicator of the extent of water pollution than Gleason and Margalef diversity index (d), Simpson's diversity index (D), and Pielou's index (J). The regression equation between S eq and EC was S eq  = - 0.118EC + 18.554. The relatively safe concentration and maximum acceptable toxicant concentration (MATC) of the wastewater for the protozoal communities were about 20 % and 42 %, respectively. To safely use this wastewater for irrigation, more than 58 % of the toxins must be removed or diluted by further processing. Monitoring of the wastewater in representative irrigated reed fields showed that the regularity of the protozoal colonization process was similar to the static ectoxicity, indicating that the toxicity of the irrigating pulp and paper wastewater was not lethal to protozoal communities in the reed fields. This study demonstrated the applicability of the PFU method in monitoring the ecotoxic effects of pulp and paper wastewater on the level of microbial communities and may guide the supervision and control of pulp and paper wastewater irrigating within the reed fields ecological system (RFES).

Despite the extensive use of the Internet, printed newspapers remain a primary information source. In this study, reading a newspaper in a relatively confined or poorly ventilated indoor space was simulated to determine the profile of particles released from the newspaper into the air. The consecutive simulated conditions were reading without agitation of the newspaper (NoAg), followed by reading with agitation of the newspaper (Ag) and post-reading absent the newspaper (PostR), repeated with four newspapers. We found that particle number concentration (ΣN) fell during Ag owing to electroadhesion of ultrafine particles (<200 nm) caused by static charges created by friction between the paper surface and the air as a result of newspaper agitation. Conversely, particle surface area concentrations (ΣA) and particle volume concentrations (ΣV) increased significantly during Ag. This was because the larger, fine (1-2.5 μm) and coarse mode (2.5-10 μm), particles were detached from the newspaper during agitation due to inertial detachment - the release of even a small number of these particles contributing greatly to ΣA and ΣV. The critical particle number diameter (CPND) occurred at 207-310 nm. Particles smaller than this were subject to electroadhesion during Ag. The critical particle volume diameter (CPVD) occurred at 130-497 nm. Particles larger than this were subject to inertial detachment during Ag. These observations indicate that the electroadhesion of smaller particles and the inertial detachment of larger particles occur simultaneously. Particle mass concentrations were found to be as high as 168.7-534.3 μg m -3 . However, these findings of high potential concentrations were based on the measurement in relative small micro-environment. The inhalation of such concentrations is a health risk for people who regularly read newspapers in a relatively confined or poorly ventilated indoor space., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The development of portable and cost-effective sensing system for Hg2+ quantitation is highly demanded for environmental monitoring. Herein, an on-site, rapid and portable smartphone readout device based Hg2+ sensing system integrating nitrogen-doped carbon quantum dots (NCDs) modified paper strip was proposed, and the physicochemical properties of NCDs were characterized by high resolution TEM, FTIR, UV–vis absorption spectrum and fluorescence spectral analysis. The modified paper strip was prepared via "ink-jet" printing technology and exhibits sensitive fluorescence response to Hg2+ with fluorescence color of bright blue (at the excitation/emission wavelength of 365/440 nm). This portable smartphone-based sensing platform is highly selective and sensitive to Hg2+ with the limit of detection (LOD) of 10.6 nM and the concentration range of 0–130 nM. In addition, the recoveries of tap water and local lake water were in the range of 89.4% to 109%. The cost-effective sensing system based on smartphone shows a great potential for trace amounts of Hg2+ monitoring in environmental water samples. [ABSTRACT FROM AUTHOR]

Air toxics are airborne pollutants known or suspected to cause cancer or other serious health effects, including certain volatile organic compounds (VOCs), prioritized by the US Environmental Protection Agency (EPA). While several EPA-designated air toxics are monitored at a subset of Canadian National Air Pollution Surveillance (NAPS) sites, Canada has no specific "air toxics" control priorities. Although pulp and paper (P&P) mills are major industrial emitters of air pollutants, few studies quantified the spectrum of air quality exposures. Moreover, most NAPS monitoring sites are in urban centers; in contrast, rural NAPS sites are sparse with few exposure risk records. The objective of this pilot study was to investigate prioritized air toxic ambient VOC concentrations using NAPS hourly emissions data from a rural Pictou, Nova Scotia Kraft P&P town to document concentration levels, and to determine whether these concentrations correlated with wind direction at the NAPS site (located southwest of the mill). Publicly accessible Environment and Climate Change Canada data (VOC concentrations [Granton NAPS ID: 31201] and local meteorological conditions [Caribou Point]) were examined using temporal (2006-2013) and spatial analytic methods. Results revealed several VOCs (1,3-butadiene, benzene, and carbon tetrachloride) routinely exceeded EPA air toxics-associated cancer risk thresholds. 1,3-Butadiene and tetrachloroethylene were significantly higher (p < 0.05) when prevailing wind direction blew from the northeast and the mill towards the NAPS site. Conversely, when prevailing winds originated from the southwest towards the mill, higher median VOC air toxics concentrations at the NAPS site, except carbon tetrachloride, were not observed. Despite study limitations, this is one of few investigations documenting elevated concentrations of certain VOCs air toxics to be associated with P&P emissions in a community. Findings support the need for more research on the extent to which air toxics emissions exist in P&P towns and contribute to poor health in nearby communities.

Small-scale shrimp trawling is crucial for the economy and culture of coastal communities worldwide, providing several ecosystem services. However, bottom trawling is well-known for its negative impacts on habitat structure and marine communities. Bycatch, or the accidental capture of non-target species during fishing, can offer valuable insights into the composition and variation of fish assemblages. This study was conducted between 2009 and 2010 and focuses on the Barra do Sul, Penha, and Porto Belo areas, which are traditionally used for artisanal shrimp fishing. We evaluated the variation in the composition of fish species caught as accompanying fauna, as well as the influence of environmental variables on the associated fish assemblages. The results indicate that differences in species composition were more pronounced spatially than temporally, suggesting that the structural characteristics and environmental filters of different study areas play a crucial role in shaping marine fish bycatch assemblages. Porto Belo showed higher abundance, biomass, and diversity, likely due to its greater substrate heterogeneity and habitat complexity, which promote higher environmental quality and species richness. The gam models used for abundance and diversity confirm the complexity of ecological interactions and highlight that depth, salinity, temperature, chlorophyll a and nutrient concentration (NO 2 and PO 4 3 -) were key environmental variables in determining the abundance and diversity of fish assemblages, indicating that the response of these communities to environmental variations is influenced by a specific combination of these factors. Additionally, species from the Sciaenidae and Paralichthyidae families were identified as significant contributors to the variation in fish communities. The presence of threatened species, such as Zapteryx brevirostris and Atlantoraja cyclophora, in the bycatch is particularly concerning for conservation efforts. Finally, our findings emphasize the importance of implementing management strategies tailored to local environmental conditions and protecting endangered species to promote sustainable management of marine resources and mitigate the impacts of trawling on a global scale., Competing Interests: Declarations. Ethics approval: No applicable. Competing Interests: The authors declare no competing interests., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

The current work was conducted to investigate fisheries dynamics, rate of growth, and mortality, along with demographic features of Schizothorax niger using length-frequency data collected monthly from Manasbal Lake from August 2020 and July 2022. The length data for estimation was categorized into 13 bins, and population parameters were explored utilizing various options in ELEFAN I, with the best fit (Rn = 0.282) calculated by means of the FiSAT-II application. TW = 1.94 TL 2.94 , with a =  - 1.94, b = 2.94, and an attuned r 2  = 0.77 were derived for the weight and length association. The growing performance metric (ϕ) was calculated as 2.80. S. niger harvested stock in Manasbal Lake was prevalent in length categories of 20.5 to 25.4 and 25.5 to 30.4 cm. Different growth attributes were valued utilizing length frequency statistics as L ∞  = 46.05 cm, k = 0.30/year, and t 0  =  - 0.493 years. Over all mortality (Z), natural mortality (M), and fishing mortality (F) coefficients were evaluated as 1.43 year -1 , 0.56 year -1 , and 0.87 year -1 , respectively. The fish's average length was assessed at the culmination of the 1st, 2nd, 3rd, 4th, 5th, and 6th year as 15.42 cm, 22.78 cm, 28.09 cm, 32.61 cm, 36.03 cm, and 38.53 cm, respectively. Recruitment patterns in S. niger from Manasbal Lake indicate a singular annual recruitment occurrence, exclusively observed during the month of June. The current value of the exploitation (fish harvest) ratio (E) was 0.61 by the size-transformed catch curvature method, found to be marginally lower than the maximum value (E max ) of 0.699 depicting that the species is on the brink of overexploitation, and caution is required to maintain sustainability. The seasonal analysis of water quality parameters revealed that except for pH and free carbon dioxide, the other parameters showed pronounced temporal variations. Total alkalinity values were reflective of hard water type of the lake, and dissolved oxygen and free carbon dioxide values were reported to be suitable for S. niger., Competing Interests: Declarations. Ethical approval: All authors have read, understood, and have complied as applicable with the statement on “Ethical responsibilities of Authors” as found in the Instructions for Authors. Competing interest: The authors declare no competing interests., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)