Search

Metal artifacts notoriously pose significant challenge in computed tomography (CT), leading to inaccuracies in image formation and interpretation. Artifact reduction tools have been designed to improve cone beam computed tomography (CBCT) image quality by reducing artifacts caused by certain high-density materials. Metal artifact reduction (MAR) tools are specific algorithms that are applied during image reconstruction to minimize or eliminate artifacts degrading CBCT images. The purpose of the study is to evaluate the effect of a MAR algorithm on image quality in CBCT performed for evaluating patients before transarterial radioembolization (TARE). We retrospectively included 40 consecutive patients (aged 65 ± 13 years; 23 males) who underwent 45 CBCT examinations (Allura FD 20, XperCT Roll protocol, Philips Healthcare, Best, The Netherlands) in the setting of evaluation for TARE between January 2017 and December 2018. Artifacts caused by coils, catheters, and surgical clips were scored subjectively by four readers on a 5-point scale (1 = artifacts affecting diagnostic information to 5 = no artifacts) using a side-by-side display of uncorrected and MAR-corrected images. In addition, readers scored tumor visibility and vessel discrimination. MAR-corrected images were assigned higher scores, indicating better image quality. The differences between the measurements with and without MAR were most impressive for coils with a mean improvement of 1.6 points (95%CI [1.5 1.8]) on the 5-point likert scale, followed by catheters 1.4 points (95%CI [1.3 1.5]) and clips 0.7 points (95%CI [0.3 1.1]). Improvements for other artifact sources were consistent but relatively small (below 0.25 points on average). Interrater agreement was good to perfect (Kendall's W coefficient = 0.68-0.95) and was higher for MAR-corrected images, indicating that MAR improves diagnostic accuracy. A metal artifact reduction algorithm can improve diagnostic and interventional accuracy of cone beam CT in patients undergoing radioembolization by reducing artifacts caused by diagnostic catheters and coils, lowering interference of metal artifacts with adjacent major structures, and improving tumor visibility., (© 2024. The Author(s).)

Purpose: To evaluate the effects of exposure protocol, voxel sizes, and artifact removal algorithms on the trueness of segmentation in various mandible regions using an artificial intelligence (AI)-based system., Materials and Methods: Eleven dry human mandibles were scanned using a cone beam computed tomography (CBCT) scanner under differing exposure protocols (standard and ultra-low), voxel sizes (0.15 mm, 0.3 mm, and 0.45 mm), and with or without artifact removal algorithm. The resulting datasets were segmented using an AI-based system, exported as 3D models, and compared to reference files derived from a white-light laboratory scanner. Deviation measurement was performed using a computer-aided design (CAD) program and recorded as root mean square (RMS). The RMS values were used as a representation of the trueness of the AI-segmented 3D models. A 4-way ANOVA was used to assess the impact of voxel size, exposure protocol, artifact removal algorithm, and location on RMS values (α = 0.05)., Results: Significant effects were found with voxel size (p < 0.001) and location (p < 0.001), but not with exposure protocol (p = 0.259) or artifact removal algorithm (p = 0.752). Standard exposure groups had significantly lower RMS values than the ultra-low exposure groups in the mandible body with 0.3 mm (p = 0.014) or 0.45 mm (p < 0.001) voxel sizes, the symphysis with a 0.45 mm voxel size (p = 0.011), and the whole mandible with a 0.45 mm voxel size (p = 0.001). Exposure protocol did not affect RMS values at teeth and alveolar bone (p = 0.544), mandible angles (p = 0.380), condyles (p = 0.114), and coronoids (p = 0.806) locations., Conclusion: This study informs optimal exposure protocol and voxel size choices in CBCT imaging for true AI-based automatic segmentation with minimal radiation. The artifact removal algorithm did not influence the trueness of AI segmentation. When using an ultra-low exposure protocol to minimize patient radiation exposure in AI segmentations, a voxel size of 0.15 mm is recommended, while a voxel size of 0.45 mm should be avoided., (© 2024 The Authors. Journal of Prosthodontics published by Wiley Periodicals LLC on behalf of American College of Prosthodontists.)

Objective: We propose a dual-domain cone beam computed tomography (CBCT) reconstruction framework DualCBR-Net based on improved differentiable domain transform for cone-angle artifact correction., Methods: The proposed CBCT dual-domain reconstruction framework DualCBR-Net consists of 3 individual modules: projection preprocessing, differentiable domain transform, and image post-processing. The projection preprocessing module first extends the original projection data in the row direction to ensure full coverage of the scanned object by X-ray. The differentiable domain transform introduces the FDK reconstruction and forward projection operators to complete the forward and gradient backpropagation processes, where the geometric parameters correspond to the extended data dimension to provide crucial prior information in the forward pass of the network and ensure the accuracy in the gradient backpropagation, thus enabling precise learning of cone-beam region data. The image post-processing module further fine-tunes the domain-transformed image to remove residual artifacts and noises., Results: The results of validation experiments conducted on Mayo's public chest dataset showed that the proposed DualCBR-Net framework was superior to other comparison methods in terms of artifact removal and structural detail preservation. Compared with the latest methods, the DualCBR-Net framework improved the PSNR and SSIM by 0.6479 and 0.0074, respectively., Conclusion: The proposed DualCBR-Net framework for cone-angle artifact correction allows effective joint training of the CBCT dual-domain network and is especially effective for large cone-angle region.

Purpose: Cone-beam computed tomography (CBCT) is widely utilized in modern radiotherapy; however, CBCT images exhibit increased scatter artifacts compared to planning CT (pCT), compromising image quality and limiting further applications. Scatter correction is thus crucial for improving CBCT image quality., Methods: In this study, we proposed an unsupervised contrastive learning method for CBCT scatter correction. Initially, we transformed low-quality CBCT into high-quality synthetic pCT (spCT) and generated forward projections of CBCT and spCT. By computing the difference between these projections, we obtained a residual image containing image details and scatter artifacts. Image details primarily comprise high-frequency signals, while scatter artifacts consist mainly of low-frequency signals. We extracted the scatter projection signal by applying a low-pass filter to remove image details. The corrected CBCT (cCBCT) projection signal was obtained by subtracting the scatter artifacts projection signal from the original CBCT projection. Finally, we employed the FDK reconstruction algorithm to generate the cCBCT image., Results: To evaluate cCBCT image quality, we aligned the CBCT and pCT of six patients. In comparison to CBCT, cCBCT maintains anatomical consistency and significantly enhances CT number, spatial homogeneity, and artifact suppression. The mean absolute error (MAE) of the test data decreased from 88.0623 ± 26.6700 HU to 17.5086 ± 3.1785 HU. The MAE of fat regions of interest (ROIs) declined from 370.2980 ± 64.9730 HU to 8.5149 ± 1.8265 HU, and the error between their maximum and minimum CT numbers decreased from 572.7528 HU to 132.4648 HU. The MAE of muscle ROIs reduced from 354.7689 ± 25.0139 HU to 16.4475 ± 3.6812 HU. We also compared our proposed method with several conventional unsupervised synthetic image generation techniques, demonstrating superior performance., Conclusions: Our approach effectively enhances CBCT image quality and shows promising potential for future clinical adoption., Competing Interests: Declaration of competing interest We declare that we do not have any commercial or associative interest that represents a conflict of interest in connection with the work submitted., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Purpose: The aim of this retrospective study was to evaluate the feasibility of a motion correction 3D reconstruction prototype technique for C-arm computed tomography (CACT)., Material and Methods: We included 65 consecutive CACTs acquired during transarterial chemoembolization of 54 patients (47 m,7f; 67 ± 11.3 years). All original raw datasets (CACT Org ) underwent reconstruction with and without volume punching of high-contrast objects using a 3D image reconstruction software to compensate for motion (CACT MC&#95;bone ;CACT MC&#95;no bone ). Subsequently, the effect on image quality (IQ) was evaluated using objective (image sharpness metric) and subjective criteria. Subjective criteria were defined by vessel geometry, overall IQ, delineation of tumor feeders, the presence of foreign material-induced artifacts and need for additional imaging, assessed by two independent readers on a 3-(vessel geometry and overall IQ) or 2-point scale, respectively. Friedman rank-sum test and post hoc analysis in form of pairwise Wilcoxon signed-rank test were computed and inter-observer agreement analyzed using kappa test., Results: Objective IQ as defined by an image sharpness metric, increased from 273.5 ± 28 (CACT Org ) to 328.5 ± 55.1 (CACT MC&#95;bone ) and 331 ± 57.8 (CACT MC&#95;no bone ; all p < 0.0001). These results could largely be confirmed by the subjective analysis, which demonstrated predominantly good and moderate inter-observer agreement, with best agreement for CACT MC&#95;no bone in all categories (e.g., vessel geometry: CACT Org : κ = 0.51, CACT MC&#95;bone : κ = 0.42, CACT MC&#95;no bone : κ = 0.69)., Conclusion: The application of a motion correction algorithm was feasible for all data sets and led to an increase in both objective and subjective IQ parameters., Level of Evidence: 3.

Purpose: Cone beam computed tomography (CBCT) systems offer physicians crucial 3D and 2D imaging capabilities during interventions. However, certain medical applications only require very specific information from the CBCTs (e.g., determination of the position of high-contrast objects). In diagnostics, tomosynthesis techniques can be used in these cases to minimize dose exposure. Therefore, integrating such techniques on CBCT systems could also be beneficial for interventions. In this paper, we investigate the performance of our implementation of circular tomosynthesis on a CBCT device., Methods: The tomosynthesis scan trajectory is realized with step-and-shoot on a clinical C-arm device. The online calibration algorithm uses conventionally acquired 3D CBCT of the scanned object as prior knowledge to correct the imaging geometries. The online calibration algorithm was compared to an offline calibration to test its performance. A ball bearing phantom was used to evaluate the reconstructions with respect to geometric distortions. The evaluation was done for three different scenarios to test the robustness of our tomosynthesis implementation against object deviations (e.g., pen) and different object positioning., Results: The circular tomosynthesis was tested on a ball bearing and an anthropomorphic phantom. The results show that the calibration is robust against isocenter shifts and object deviations in the CBCT. All reconstructions used 100 projections and displayed limited angle artifacts. The accuracy of the positions and shapes of high-contrast objects were, however, determined precisely. (The maximal center position deviation is 0.31 mm.) CONCLUSION: For medical procedures that primarily determine the precise position of high-contrast objects, circular tomosynthesis could offer an approach to reduce dose exposure.

Objectives: To assess the influence of the artefact reduction algorithm (AR) available on the Picasso Trio 3D(®) imaging system (Vatech, Hwaseong, Republic of Korea) on image quality [greyscale values, contrast-to-noise ratio (CNR) and artefact formation] and diagnosis of vertical root fractures (VRFs) in the teeth with intracanal metal posts., Methods: 30 uniradicular teeth had their crowns removed and their roots endodontically treated to receive intracanal metal posts. In 20 teeth, both complete (n = 10) and incomplete (n = 10) VRFs were created. Each tooth was scanned twice, with and without AR activation. The mean and variation of greyscale values, as well as CNR, were calculated for all images. Subsequently, an evaluator compared the amount of artefact (cupping, white streaks and dark bands) in all images. Five evaluators rated for VRF presence using a five-point scale., Results: Mean greyscale values and CNR were significantly decreased in images acquired with the AR. The usage of the algorithm promoted an overall reduction of image artefacts. Regarding the diagnosis of complete and incomplete VRFs, the use of the AR had an overall negative impact on specificity and accuracy., Conclusions: While indeed reducing artefact formation, the use of the AR, instead of improving the impact on the diagnosis of VRFs in teeth with intracanal metal posts, had a negative impact on the diagnosis.

Background: The aim of the study was to establish a weighted comprehensive evaluation model (WCEM) of image registration for cone‐beam computed tomography (CBCT) guided lung cancer radiotherapy that considers the geometric accuracy of gross target volume (GTV) and organs at risk (OARs), and assess the registration accuracy of different image registration methods to provide clinical references. Methods: The planning CT and CBCT images of 20 lung cancer patients were registered using diverse algorithms (bony and grayscale) and regions of interest (target, ipsilateral, and body). We compared the coverage ratio (CR) of the planning target volume (PTVCT) to GTVCBCT, as well as the dice similarity coefficient (DSC) of the GTV and OARs, considering the treatment position across various registration methods. Furthermore, we developed a mathematical model to assess registration results comprehensively. This model was evaluated and validated using CRFs across four automatic registration methods. Results: The grayscale registration method, coupled with the registration of the ipsilateral structure, exhibited the highest level of automatic registration accuracy, the DSC were 0.87 ± 0.09 (GTV), 0.71 ± 0.09 (esophagus), 0.74 ± 0.09 (spinal cord), and 0.91 ± 0.05 (heart), respectively. Our proposed WCEM proved to be both practical and effective. The results clearly indicated that the grayscale registration method, when applied to the ipsilateral structure, achieved the highest CRF score. The average CRF scores, excellent rates, good rate and qualification rates were 58 ± 26, 40%, 75%, and 85%, respectively. Conclusions: This study successfully developed a clinically relevant weighted evaluation model for CBCT‐guided lung cancer radiotherapy. Validation confirmed the grayscale method's optimal performance in ipsilateral structure registration. [ABSTRACT FROM AUTHOR]

The Feldkamp, Davis and Kress algorithm is a computationally efficient reconstruction method for three-dimensional cone-beam computed tomography. However, it suffers from severe artefacts when the number of projections is insufficient. Although recent deep learning–based methods have succeeded in reconstructing such sparse-view projections, it is still challenging to reconstruct a large 3D volume efficiently because of heavy memory consumption and difficulty in obtaining sufficient training data. Therefore, we propose a deep learning method to overcome these drawbacks. Our method consecutively reconstructs short bars in 3D CT volume using the intensities of pixels on the moving trajectory projected on the detector of these bars. Then, we feed such pixel intensities into a neural network and train it to simulate the filtering and back-projection processes of the FDK algorithm. Since the reconstruction volume is separated into bars, the neural network can be used with only a small amount of memory. Furthermore, the network can be trained sufficiently with only a few training samples because plenty of bar data can be extracted even from a single CT image. We experimentally demonstrate that our approach works efficiently for both simulated and actual sparse-view CBCT data using training data extracted from only a single CT image. [ABSTRACT FROM AUTHOR]

Background: The routine application of dental implants for replacing missing teeth has revolutionized restorative and prosthetic dentistry. However, cone beam computed tomography (CBCT) evaluations of structures adjacent to the implants are limited by metal artifacts. There are several methods for reducing metal artifacts, but this remains a challenging task. This study aimed to examine the effectiveness of metal artifact reduction (MAR) algorithms in identifying injuries of implants to the inferior alveolar canal in CBCT images. Method: In this in vitro study, mono-cortical bone windows were created and the inferior alveolar canal was revealed. Using 36 implants, pilot drill and penetration damage of the implant tip into the canal was simulated and compared to the control implants with distance from the canal. CBCT images were evaluated by four experienced observers with and without the MAR algorithm and compared to direct vision as the gold standard. The values of accuracy, sensitivity, and specificity were obtained and compared by receiver operating characteristic (ROC) curve (α = 0.05). Result: The area under the ROC curve values for detection of pilot drill injuries varied between 0.840–0.917 and 0.639–0.854 in the active and inactive MAR conditions, respectively. The increase in ROC area was only significant for one of the observers (P = 0.010). For diagnosing penetrative injuries, the area under the ROC curve values was between 0.990–1.000 and 0.722–1.000 in the active and inactive MAR conditions, respectively. The improvement of ROC curve values in active MAR mode was only significant for one of the observers (P = 0.006). Conclusion: Activation of MAR improved the diagnostic values of CBCT images in detecting both types of implant-related injuries to the inferior alveolar canal. However, for most observers, this increase was not statistically significant. [ABSTRACT FROM AUTHOR]

Apical periodontitis (AP) is one of the most prevalent disorders in dentistry. However, it can be underdiagnosed in asymptomatic patients. In addition, the perioperative evaluation of 3-dimensional (3D) lesion volume is of great clinical relevance, but the required slice-by-slice manual delineation method is time- and labor-intensive. Here, for quickly and accurately detecting and segmenting periapical lesions (PALs) associated with AP on cone beam computed tomography (CBCT) images, we proposed and geographically validated a novel 3D deep convolutional neural network algorithm, named PAL-Net. On the internal 5-fold cross-validation set, our PAL-Net achieved an area under the receiver operating characteristic curve (AUC) of 0.98. The algorithm also improved the diagnostic performance of dentists with varying levels of experience, as evidenced by their enhanced average AUC values (junior dentists: 0.89–0.94; senior dentists: 0.91–0.93), and significantly reduced the diagnostic time (junior dentists: 69.3 min faster; senior dentists: 32.4 min faster). Moreover, our PAL-Net achieved an average Dice similarity coefficient over 0.87 (0.85–0.88), which is superior or comparable to that of other existing state-of-the-art PAL segmentation algorithms. Furthermore, we validated the generalizability of the PAL-Net system using multiple external data sets from Central, East, and North China, showing that our PAL-Net has strong robustness. Our PAL-Net can help improve the diagnostic performance and speed of dentists working from CBCT images, provide clinically relevant volume information to dentists, and can potentially be applied in dental clinics, especially without expert-level dentists or radiologists. [ABSTRACT FROM AUTHOR]

In order to meet the heavy backprojection calculation of the backprojection filtration (BPF) algorithm in circular cone-beam computed tomography (CT), a fast backprojection method is developed, which uses the integral operator of the fixed scanning angle integral interval. The proposed method combines with Hilbert filtration and the filter of the Blackman window, and then, the fast BPF (F-BPF) algorithm is obtained. The experimental results of simulation data and real data demonstrate that the proposed algorithm is fast enough for high-quality reconstructed images only with half-circle projection data. [ABSTRACT FROM AUTHOR]

The purpose of this ambispective study was to investigate whether deep learning-based automatic segmentation and landmark detection, the SkullEngine, could be used for orthognathic surgical planning. Sixty-one sets of cone beam computed tomography (CBCT) images were automatically inferred for midface, mandible, upper and lower teeth, and 68 landmarks. The experimental group included automatic segmentation and landmarks, while the control group included manual ones that were previously used to plan orthognathic surgery. The qualitative analysis of segmentation showed that all of the automatic results could be used for computer-aided surgical simulation. Among these, 98.4% of midface, 70.5% of mandible, 98.4% of upper teeth, and 93.4% of lower teeth could be directly used without manual revision. The Dice similarity coefficient was 96% and the average symmetric surface distance was 0.1 mm for all four structures. With SkullEngine, it took 4 minutes to complete the automatic segmentation and an additional 10 minutes for a manual touchup. The results also showed the overall mean difference between the two groups was 2.3 mm for the midface and 2.4 mm for the mandible. In summary, the authors believe that automatic segmentation using SkullEngine is ready for daily practice. However, the accuracy of automatic landmark digitization needs to be improved. [ABSTRACT FROM AUTHOR]

Objectives: Due to advancing digitalisation, it is of interest to develop standardised and reproducible fully automated analysis methods of cranial structures in order to reduce the workload in diagnosis and treatment planning and to generate objectifiable data. The aim of this study was to train and evaluate an algorithm based on deep learning methods for fully automated detection of craniofacial landmarks in cone-beam computed tomography (CBCT) in terms of accuracy, speed, and reproducibility. Materials and methods: A total of 931 CBCTs were used to train the algorithm. To test the algorithm, 35 landmarks were located manually by three experts and automatically by the algorithm in 114 CBCTs. The time and distance between the measured values and the ground truth previously determined by an orthodontist were analyzed. Intraindividual variations in manual localization of landmarks were determined using 50 CBCTs analyzed twice. Results: The results showed no statistically significant difference between the two measurement methods. Overall, with a mean error of 2.73 mm, the AI was 2.12% better and 95% faster than the experts. In the area of bilateral cranial structures, the AI was able to achieve better results than the experts on average. Conclusion: The achieved accuracy of automatic landmark detection was in a clinically acceptable range, is comparable in precision to manual landmark determination, and requires less time. Clinical relevance: Further enlargement of the database and continued development and optimization of the algorithm may lead to ubiquitous fully automated localization and analysis of CBCT datasets in future routine clinical practice. [ABSTRACT FROM AUTHOR]

Circular cone-beam computed tomography (CT) is a popular configuration in industrial non-destructive testing. Corresponding to the circular cone-beam CT, the Feldkamp, Davis, and Kress (FDK) algorithm is the most popular reconstruction method. However, in the case of large cone angle scanning, the slice artifacts of the reconstruction using the FDK algorithm are visible because the data collected with the circular orbit scan mode do not satisfy the completeness conditions for exact reconstruction. To solve the problem, this study proposed a hybrid FDK (H-FDK) algorithm using a method that combines variable filtering and conjugate rays. First, the shape and curvature of the detector were changed for the filtering paths to be variable. Then, the conjugate weighting function for backprojection was constructed. Subsequently, optimization experiments were conducted to find optimal parameters for the detector and conjugate weighting function. Finally, the comparative experimental results demonstrated that the slices reconstructed by the H-FDK algorithm produced a discernible quality improvement. [ABSTRACT FROM AUTHOR]

Introduction: Stereotactic body radiotherapy (SBRT) is an ablative method for lung malignancies. Here, the definition of the gross target volume (GTV) is subject to interobserver variation. In this study, we aimed to evaluate the interobserver variability during SBRT and its dosimetric impact, as well as to introduce a semi-automated delineation tool for both planning computer tomography (P-CT) and cone beam CT (CBCT) to help to standardise GTV delineation and adaptive volume-change registration. Methods: The interobserver variation of GTV manual contours from five physicians was analysed in 15 patients after lung SBRT on free breathing (FB) P-CT (n = 15) and CBCT (n = 90) before and after each fraction. The dosimetric impact from interobserver variations of GTV based on the original treatment plan was analysed. Next, the accuracy of an in-house easy-to-use semi-automatedsegmentation algorithm for pulmonary lesions was compared with gold standard contours in FB P-CT and CBCT, as well as 4D P-CT of additional 10 patients. Results: The interobserver variability in manual contours resulted in violations of dose coverage of the planning target volume (PTV), which, in turn, resulted in compromised tumour control probability in contours from four physicians. The validation of the semi-automated delineation algorithm using thorax phantom led to a highly reliable accuracy in defining GTVs. Comparing the unsupervised auto-contours with the gold standard delineation revealed high equal high concordance for FB P-CT, 4D P-CT and CBCT, with a DSC of 0.83, 0.76 and 0.8, respectively. The supervised use of the semiautomated delineation tool improved its accuracy, with DSCs of 0.86, 0.86 and 0.8 for FB P-CT, 4D P-CT and CBCT, respectively. The use of the algorithm was associated with a significantly shorter working time. The semi-automated delineation tool can accurately register volume changes in CBCTs. Conclusion: The segmentation algorithm provides a reliable, standardised and time-saving alternative for manual delineation in lung SBRT in P-CT and CBCT. [ABSTRACT FROM AUTHOR]

Simple Summary: Cone-beam computed tomography (CBCT) not only plays an important role in image-guided radiation therapy (IGRT) but also has the potential for dose calculation. Because CBCT suffers from poor image quality and uncertainties in the Hounsfield unit (HU) values, the accuracy of dose calculation with CBCT is insufficient for clinical use. This study investigated deep learning approaches that utilize a generative adversarial network (GAN) with an additional registration network (RegNet) to generate synthetic CT (sCT) from CBCT. Our study addressed the limitation of having paired CT and CBCT with their anatomy perfectly aligned for supervised training. RegNet can dynamically estimate the correct labels, enabling supervised learning with noisy labels, whereas GAN learns the bidirectional mapping from CBCT to CT. The HU values for sCT were sufficiently accurate for dose calculation, while preserving the anatomy of CBCT with clear structural boundaries. Recently, deep learning with generative adversarial networks (GANs) has been applied in multi-domain image-to-image translation. This study aims to improve the image quality of cone-beam computed tomography (CBCT) by generating synthetic CT (sCT) that maintains the patient's anatomy as in CBCT, while having the image quality of CT. As CBCT and CT are acquired at different time points, it is challenging to obtain paired images with aligned anatomy for supervised training. To address this limitation, the study incorporated a registration network (RegNet) into GAN during training. RegNet can dynamically estimate the correct labels, allowing supervised learning with noisy labels. The study developed and evaluated the approach using imaging data from 146 patients with head and neck cancer. The results showed that GAN trained with RegNet performed better than those trained without RegNet. Specifically, in the UNIT model trained with RegNet, the mean absolute error (MAE) was reduced from 40.46 to 37.21, the root mean-square error (RMSE) was reduced from 119.45 to 108.86, the peak signal-to-noise ratio (PSNR) was increased from 28.67 to 29.55, and the structural similarity index (SSIM) was increased from 0.8630 to 0.8791. The sCT generated from the model had fewer artifacts and retained the anatomical information as in CBCT. [ABSTRACT FROM AUTHOR]

Featured Application: Convolutional neural networks can accurately identify the Inferior Alveolar Canal, rapidly generating precise 3D data. The datasets and source code used in this paper are publicly available, allowing the reproducibility of the experiments performed. Introduction: The need of accurate three-dimensional data of anatomical structures is increasing in the surgical field. The development of convolutional neural networks (CNNs) has been helping to fill this gap by trying to provide efficient tools to clinicians. Nonetheless, the lack of a fully accessible datasets and open-source algorithms is slowing the improvements in this field. In this paper, we focus on the fully automatic segmentation of the Inferior Alveolar Canal (IAC), which is of immense interest in the dental and maxillo-facial surgeries. Conventionally, only a bidimensional annotation of the IAC is used in common clinical practice. A reliable convolutional neural network (CNNs) might be timesaving in daily practice and improve the quality of assistance. Materials and methods: Cone Beam Computed Tomography (CBCT) volumes obtained from a single radiological center using the same machine were gathered and annotated. The course of the IAC was annotated on the CBCT volumes. A secondary dataset with sparse annotations and a primary dataset with both dense and sparse annotations were generated. Three separate experiments were conducted in order to evaluate the CNN. The IoU and Dice scores of every experiment were recorded as the primary endpoint, while the time needed to achieve the annotation was assessed as the secondary end-point. Results: A total of 347 CBCT volumes were collected, then divided into primary and secondary datasets. Among the three experiments, an IoU score of 0.64 and a Dice score of 0.79 were obtained thanks to the pre-training of the CNN on the secondary dataset and the creation of a novel deep label propagation model, followed by proper training on the primary dataset. To the best of our knowledge, these results are the best ever published in the segmentation of the IAC. The datasets is publicly available and algorithm is published as open-source software. On average, the CNN could produce a 3D annotation of the IAC in 6.33 s, compared to 87.3 s needed by the radiology technician to produce a bidimensional annotation. Conclusions: To resume, the following achievements have been reached. A new state of the art in terms of Dice score was achieved, overcoming the threshold commonly considered of 0.75 for the use in clinical practice. The CNN could fully automatically produce accurate three-dimensional segmentation of the IAC in a rapid setting, compared to the bidimensional annotations commonly used in the clinical practice and generated in a time-consuming manner. We introduced our innovative deep label propagation method to optimize the performance of the CNN in the segmentation of the IAC. For the first time in this field, the datasets and the source codes used were publicly released, granting reproducibility of the experiments and helping in the improvement of IAC segmentation. [ABSTRACT FROM AUTHOR]

Purpose: This study aimed to perform a systematic review and meta-analysis of the literature on mandibular incisive canal (MIC) studies using cone beam computed tomography (CBCT). Materials and Methods: A PROSPERO-registered systematic review (#42017056619) was conducted following the PRISMA statements to summarize current knowledge on the CBCT aspects of the MIC. A search was performed in PubMed's Medline and Scopus databases, without date or language restrictions, using the algorithm {[(Interforaminal region) OR (mandibular incisive channel) OR (mandibular incisive nerve) OR (mental mandible) OR (anterior mandible) (cone beam computed tomography)]}. Also, the references were crosschecked. The Meta-Analysis of Statistics Assessment and Review Instrument and meta-analysis was used to evaluate the selected studies. Results: A total of 410 articles were found, and 25 studies were selected after a two-step selection process. The CBCT systems differed regarding field of view (FOV) (large, n = 3; medium, n = 2; small, n = 4; not informed, n = 16) and voxel size (0.15 to 0.4 mm). Geographically, the studies were distributed across four continents (South America, North America, Asia, and Europe), and there was a statistical significance of studies from the American and Asian continents (P < .0001). From 3,421 CBCT exams, the number of female patients was slightly higher than male, and the mean age ranged from 29.8 to 59.1 years. The overall mean prevalence of MIC was 89.6% ± 15.08%, and bilateral occurrence was statistically significant (P < .0001). The studies using a voxel size lower than 0.3 mm showed the highest mean prevalence (93.88%) in comparison with voxel size described as ≥ 0.3 mm (89.33%). Diameter (0.45 to 4.12 mm) and length (6.6 to 40.3 mm) showed great variability among the included studies. Conclusion: The results of this systematic review evidenced a high worldwide prevalence of MIC. There was no prevalence of MIC in relation to sex, and its presence was mainly related to adults between the fourth and sixth decades of life. In addition, great heterogeneity of methodologies was observed. [ABSTRACT FROM AUTHOR]

Purpose: Soft and hard tissue volumes are critical for implant placement and long-term stability. Although the literature has adequately addressed tissue biotypes of Western populations, pertinent information about Asian populations is limited. This study aimed to evaluate the soft and hard tissue profiles of the maxillary anterior teeth of the Taiwanese population using a semi-automatic algorithm. Materials and Methods: Cone beam computed tomography images of 11 adults with well-aligned maxillary anterior teeth were overlaid with those of cast models, based on the tooth crowns manually outlined by two independent observers. Each tooth was digitally trisected mesiodistally and apicocoronally. The thicknesses of the labial gingiva and alveolar bone were measured using a customized software program. Results: No obvious difference between the observers was noted regarding the dimension of tooth crowns. The average thicknesses of the labial gingiva, the labial alveolar bone, and the palatal alveolar bone were 1.76 ± 0.11 mm, 1.02 ± 0.12 mm and 1.80 ± 0.31 mm, respectively, with no significant differences between teeth. All parameters were thicker in the apical region than in the cervical region and the alveolar bone was thinner in the midlabial region of incisors than in the interproximal regions. The thinnest areas were the midcervical compartment of the right central incisor (0.53 ± 0.33 mm) for the labial gingiva, the midcervical compartment of the right lateral incisor (0.23 ± 0.10 mm) for the labial alveolar bone, and the mesiocervical compartment of the left central incisor (0.33 ± 0.09 mm) for the palatal alveolar bone. Conclusion: This study presents an objective and comprehensive methodology for evaluating the soft and hard tissue profiles of maxillary anterior teeth and may be of value for presurgical planning for immediate implant placement. The results suggest that profiles of the Taiwanese subjects are similar to profiles of Western populations. [ABSTRACT FROM AUTHOR]

Clinical reports regarding the entire surgical sequence in Crouzon syndrome from the neonatal period to the adult age are rare. The purpose of this study is to trace an operative algorithm with a long term follow up in a homogenous group of patients affected by Crouzon syndrome. A retrospective review was conducted for all patients affected by Crouzon syndrome who completed the entire surgical sequence. 7 Crouzon patients (4 females, 3 males) completed the entire surgical sequence at different ages: fronto-orbital advancement (0.9 years), LF III distraction osteogenesis (11.5 years) and orthognathic surgery (18 years). The mean age at the last follow up was 19.3 years; normalization of the face was obtained in all cases with improvement of the respiratory problems. After orthognathic surgery, all patients had stable occlusion. A one-year postoperative CBCT scan revealed almost complete ossification of all osteotomy sites. Frontoorbital advancement and modified Le Fort III distraction osteogenesis are reliable surgical procedures. SARME and conventional orthognathic surgery with reductive genioplasty and fat grafting are performed at the end of the surgical sequence to enhance facial aesthetics. [ABSTRACT FROM AUTHOR]

Introduction: Several studies have reported the relation between the imaging dose and secondary cancer risk and have emphasized the need to minimize the additional imaging dose as low as reasonably achievable. The iterative cone-beam computed tomography (iCBCT) algorithm can improve the image quality by utilizing scatter correction and statistical reconstruction. We investigate the use of a novel iCBCT reconstruction algorithm to reduce the patient dose while maintaining low-contrast detectability and registration accuracy. Methods: Catphan and anthropomorphic phantoms were analyzed. All CBCT images were acquired with varying dose levels and reconstructed with a Feldkamp–Davis–Kress algorithm-based CBCT (FDK-CBCT) and iCBCT. The low-contrast detectability was subjectively assessed using a 9-point scale by 4 reviewers and objectively assessed using structure similarity index (SSIM). The soft tissue-based registration error was analyzed for each dose level and reconstruction technique. Results: The results of subjective low-contrast detectability found that the iCBCT acquired at two-thirds of a dose was superior to the FDK-CBCT acquired at a full dose (6.4 vs 5.4). Relative to FDK-CBCT acquired at full dose, SSIM was higher for iCBCT acquired at one-sixth dose in head and head and neck region while equivalent with iCBCT acquired at two-thirds dose in pelvis region. The soft tissue-based registration was 2.2 and 0.6 mm for FDK-CBCT and iCBCT, respectively. Conclusion: Use of iCBCT reconstruction algorithm can generally reduce the patient dose by approximately two-thirds compared to conventional reconstruction methods while maintaining low-contrast detectability and accuracy of registration. [ABSTRACT FROM AUTHOR]

In the electron beam radiation therapy, customized blocks are mostly used to shape treatment fields to generate conformal doses. The goal of this study is to investigate quantitatively dosimetric uncertainties associated with heterogeneities, detectors used in the measurement of the beam data commissioning, and modeling of the interactions of high energy electrons with tissue. These uncertainties were investigated both by measurements with different detectors and calculations using electron Monte Carlo algorithm (eMC) in the Eclipse treatment planning system. Dose distributions for different field sizes were calculated using eMC and measured with a multiple‐diode‐array detector (MapCheck2) for cone sizes ranging from 6 to 25 cm. The dose distributions were calculated using the CT images of the MapCheck2 and water‐equivalent phantoms. In the umbra region (<20% isodose line), the eMC underestimated dose by a factor of 3 for high energy electron beams due to lack of consideration of bremsstrahlung emitted laterally that was not accounted by eMC in the low dose region outside the field. In the penumbra (20%–80% isodose line), the eMC overestimated dose (40%) for high energy 20 MeV electrons compared to the measured dose with small diodes in the high gradient dose region. This was mainly due to lack of consideration of volume averaging of the ion chamber used in beam data commissioning which was input to the eMC dose calculation algorithm. Large uncertainties in the CT numbers (25%) resulted from the image artifacts in the CT images of the MapCheck2 phantom due to metal artifacts. The eMC algorithm used the electron and material densities extracted from the CT numbers which resulted large dosimetric uncertainties (10%) in the material densities and corresponding stopping power ratios. The dose calculations with eMC are associated with large uncertainties particularly in penumbra and umbra regions and around heterogeneities which affect the low dose level that cover nearby normal tissue or critical structures. [ABSTRACT FROM AUTHOR]

Purpose: Cone‐beam CT (CBCT) has been widely utilized in image‐guided radiotherapy. Planning CT (pCT)‐aided CBCT scatter correction could further enhance image quality and extend CBCT application to dose calculation and adaptive planning. Nevertheless, existing pCT‐based approaches demand accurate registration between pCT and CBCT, leading to limited imaging performance and increased computational cost when large anatomical discrepancies exist. In this work, we proposed a robust and fast CBCT scatter correction method using local filtration technique and rigid registration between pCT and CBCT (LF‐RR). Methods: First of all, the pCT was rigidly registered with CBCT, then forward projection was performed on registered pCT to create scatter‐free projections. The raw scatter signals were obtained via subtracting the scatter‐free projections from the measured CBCT projections. Based on frequency and intensity threshold criteria, reliable scatter signals were selected from the raw scatter signals, and further filtered for global scatter estimation via local filtration technique. Finally, corrected CBCT was reconstructed with the projections generated by subtracting the scatter estimation from the raw CBCT projections using FDK algorithm. The LF‐RR method was evaluated via comparison with another pCT‐based scatter correction method based on Median and Gaussian filters (MG method). Results: Proposed method was first validated on an anthropomorphic pelvis phantom, and showed satisfied performance on scatter removal even when anatomical mismatches were intentionally created on pCT. The quantitative analysis was further performed on four clinical CBCT images. Compared with the uncorrected CBCT, CBCT corrected by MG with rigid registration (MG‐RR), MG with deformable registration (MG‐DR), and LF‐RR reduced the CT number error from 79±35 to 25±18,17±13 and 7±3 HU for adipose and from 115±61 to 36±22,30±24, 7±3 HU for muscle, respectively. After correction, the spatial non‐uniformity (SNU) of CBCT corrected with MG‐RR, MG‐DR and LF‐RR was 51±13,60±21, and 21±9 HU for adipose, and 50±22,57±41, and 25±6 HU for muscle, respectively. Meanwhile, the contrast‐to‐noise ratio (CNR) between muscle and adipose was increased by a factor of 2.70, 2.89 and 2.56, respectively. Using the LF‐RR method, the scatter correction of 656 projections can be finished within 10 s and the corrected volumetric images (200 slices) can be obtained within 2 min. Conclusion: We developed a fast and robust pCT‐based CBCT scatter correction method which exploits the local‐filtration technique to promote the accuracy of scatter estimation and is resistant to pCT‐to‐CBCT registration uncertainties. Both phantom and patient studies showed the superiority of the proposed correction in imaging accuracy and computational efficiency, indicating promisingfuture clinical application. [ABSTRACT FROM AUTHOR]

For the purpose of real-time scan-protocol optimisation and patient-specific dose management in cone-beam computed tomography, we introduce a numerical algorithm that estimates the primary dose distributions in reconstructed images. The proposed algorithm is based on the ray-tracing technique and utilises reconstructed voxel data and scanning protocol. The algorithm is validated with the Monte Carlo (MC) and conventional model-based dose reconstruction methods for the simple cylindrical water and anthropomorphic head phantoms. The algorithm shows good agreement with both methods in terms of the zeroth-order x-ray interactions, which exclude the higher-order x-ray interactions at sites distant from the first interactions, and it consumes a significantly lower computational cost compared with the MC method. The differences between the proposed algorithm and the model-based dose reconstruction method as well as the improvement strategies of the algorithm are discussed in detail. [ABSTRACT FROM AUTHOR]

Purpose: Four‐dimensional cone‐beam computed tomography (4D CBCT) is developed to reconstruct a sequence of phase‐resolved images, which could assist in verifying the patient's position and offering information for cancer treatment planning. However, 4D CBCT images suffer from severe streaking artifacts and noise due to the extreme sparse‐view CT reconstruction problem for each phase. As a result, it would cause inaccuracy of treatment estimation. The purpose of this paper was to develop a new 4D CBCT reconstruction method to generate a series of high spatiotemporal 4D CBCT images. Methods: Considering the advantage of (DL) on representing structural features and correlation between neighboring pixels effectively, we construct a novel DL‐based method for the 4D CBCT reconstruction. In this study, both a motion‐aware dictionary and a spatially structural 2D dictionary are trained for 4D CBCT by excavating the spatiotemporal correlation among ten phase‐resolved images and the spatial information in each image, respectively. Specifically, two reconstruction models are produced in this study. The first one is the motion‐aware dictionary learning‐based 4D CBCT algorithm, called motion‐aware DL based 4D CBCT (MaDL). The second one is the MaDL equipped with a prior knowledge constraint, called pMaDL. Qualitative and quantitative evaluations are performed using a 4D extended cardiac torso (XCAT) phantom, simulated patient data, and two sets of patient data sets. Several state‐of‐the‐art 4D CBCT algorithms, such as the McKinnon–Bates (MKB) algorithm, prior image constrained compressed sensing (PICCS), and the high‐quality initial image‐guided 4D CBCT reconstruction method (HQI‐4DCBCT) are applied for comparison to validate the performance of the proposed MaDL and prior constraint MaDL (pMaDL) pmadl reconstruction frameworks. Results: Experimental results validate that the proposed MaDL can output the reconstructions with few streaking artifacts but some structural information such as tumors and blood vessels, may still be missed. Meanwhile, the results of the proposed pMaDL demonstrate an improved spatiotemporal resolution of the reconstructed 4D CBCT images. In these improved 4D CBCT reconstructions, streaking artifacts are suppressed primarily and detailed structures are also restored. Regarding the XCAT phantom, quantitative evaluations indicate that an average of 58.70%, 45.25%, and 40.10% decrease in terms of root‐mean‐square error (RMSE) and an average of 2.10, 1.37, and 1.37 times in terms of structural similarity index (SSIM) are achieved by the proposed pMaDL method when compared with piccs, PICCS, MaDL(2D), and MaDL(2D), respectively. Moreover the proposed pMaDL achieves a comparable performance with HQI‐4DCBCT algorithm in terms of RMSE and SSIM metrics. However, pMaDL has a better ability to suppress streaking artifacts than HQI‐4DCBCT. Conclusions: The proposed algorithm could reconstruct a set of 4D CBCT images with both high spatiotemporal resolution and detailed features preservation. Moreover the proposed pMaDL can effectively suppress the streaking artifacts in the resultant reconstructions, while achieving an overall improved spatiotemporal resolution by incorporating the motion‐aware dictionary with a prior constraint into the proposed 4D CBCT iterative framework. [ABSTRACT FROM AUTHOR]

Background: Estimation of eye lens dose is important in head computed tomography (CT) examination since the eye lens is a sensitive organ to ionizing radiation. Objective: The purpose of this study is to compare estimations of eye lens dose in head CT examinations using local size-specific dose estimate (SSDE) based on size-conversion factors of the American Association of Physicists in Medicine (AAPM) Report No. 293 with those based on size-conversion factors of the AAPM Report No. 220. Material and Methods: This experimental study is conducted on a group of patients who had undergone nasopharyngeal CT examination. Due to the longitudinal (z-axis) dose fluctuation, the average global SSDE and average local SSDE (i.e. particular slices where the eyes are located) were investigated. All estimates were compared to the measurement results using thermo-luminescent dosimeters (TLDs). The estimated and measured doses were implemented for 14 patients undergoing nasopharyngeal CT examination. Results: It was found that the percentage differences of the volume CT dose index (CTDIvol), average global SSDE based on AAPM No. 220 (SSDEo,g), average local SSDE based on AAPM No. 220 (SSDEo,l), average global SSDE based on AAPM No. 293 (SSDEn,g) and average local SSDE based on AAPM No. 293 (SSDEn,l) against the measured TLD doses were 22.5, 21.7, 15.0, 9.3, and 2.1%, respectively. All comparisons between dose estimates and TLD measurements gave p-values less than 0.001, except for SSDEn,l (p-value = 0.566). Conclusion: SSDE based on AAPM Report No. 293 can be used to accurately estimate eye lens radiation doses by performing the calculations on a number of specific slices containing the eyes. [ABSTRACT FROM AUTHOR]

This paper aimed to study the adoption of deep learning (DL) algorithm of oral lesions for segmentation of cone-beam computed tomography (CBCT) images. 90 patients with oral lesions were taken as research subjects, and they were grouped into blank, control, and experimental groups, whose images were treated by the manual segmentation method, threshold segmentation algorithm, and full convolutional neural network (FCNN) DL algorithm, respectively. Then, effects of different methods on oral lesion CBCT image recognition and segmentation were analyzed. The results showed that there was no substantial difference in the number of patients with different types of oral lesions among three groups (P > 0.05). The accuracy of lesion segmentation in the experimental group was as high as 98.3%, while those of the blank group and control group were 78.4% and 62.1%, respectively. The accuracy of segmentation of CBCT images in the blank group and control group was considerably inferior to the experimental group (P < 0.05). The segmentation effect on the lesion and the lesion model in the experimental group and control group was evidently superior to the blank group (P < 0.05). In short, the image segmentation accuracy of the FCNN DL method was better than the traditional manual segmentation and threshold segmentation algorithms. Applying the DL segmentation algorithm to CBCT images of oral lesions can accurately identify and segment the lesions. [ABSTRACT FROM AUTHOR]

Proton therapy treatment for lungs remains challenging as images enabling the detection of inter- and intra-fractional motion, which could be used for proton dose adaptation, are not readily available. 4D computed tomography (4DCT) provides high image quality but is rarely available in-room, while in-room 4D cone beam computed tomography (4DCBCT) suffers from image quality limitations stemming mostly from scatter detection. This study investigated the feasibility of using virtual 4D computed tomography (4DvCT) as a prior for a phase-per-phase scatter correction algorithm yielding a 4D scatter corrected cone beam computed tomography image (4DCBCTcor), which can be used for proton dose calculation. 4DCT and 4DCBCT scans of a porcine lung phantom, which generated reproducible ventilation, were acquired with matching breathing patterns. Diffeomorphic Morphons, a deformable image registration algorithm, was used to register the mid-position 4DCT to the mid-position 4DCBCT and yield a 4DvCT. The 4DCBCT was reconstructed using motion-aware reconstruction based on spatial and temporal regularization (MA-ROOSTER). Successively for each phase, digitally reconstructed radiographs of the 4DvCT, simulated without scatter, were exploited to correct scatter in the corresponding CBCT projections. The 4DCBCTcor was then reconstructed with MA-ROOSTER using the corrected CBCT projections and the same settings and deformation vector fields as those already used for reconstructing the 4DCBCT. The 4DCBCTcor and the 4DvCT were evaluated phase-by-phase, performing proton dose calculations and comparison to those of a ground truth 4DCT by means of dose-volume-histograms (DVH) and gamma pass-rates (PR). For accumulated doses, DVH parameters deviated by at most 1.7% in the 4DvCT and 2.0% in the 4DCBCTcor case. The gamma PR for a (2%, 2 mm) criterion with 10% threshold were at least 93.2% (4DvCT) and 94.2% (4DCBCTcor), respectively. The 4DCBCTcor technique enabled accurate proton dose calculation, which indicates the potential for applicability to clinical 4DCBCT scans. [ABSTRACT FROM AUTHOR]

Purpose: Flat‐panel detector (FPD) based dual‐energy cone‐beam computed tomography (DE‐CBCT) is a promising imaging technique for dedicated clinical applications. In this paper, we proposed a fully analytical method for fast and effective single‐scan DE‐CBCT image reconstruction and decomposition. Methods: A rotatable Mo filter was inserted between an x‐ray source and imaged object to alternately produce low and high‐energy x‐ray spectra. First, filtered‐backprojection (FBP) method was applied on down‐sampled projections to reconstruct low and high‐energy images. Then, the two images were converted into a vectorized form represented with an amplitude and an argument image. Using amplitude image as a guide, a joint bilateral filter was applied to denoise the argument image. Then, high‐quality dual‐energy images were recovered from the amplitude image and the denoised argument image. Finally, the recovered dual‐energy images were further used for low‐noise material decomposition and electron density synthesis. Imaging was conducted on a Catphan®600 phantom and an anthropomorphic head phantom. The proposed method was evaluated via comparison with the traditional two‐scan method and a commonly used filtering method (HYPR‐LR). Results: On the Catphan®600 phantom, the proposed method successfully reduced streaking artifacts and preserved spatial resolution and noise‐power‐spectrum (NPS) pattern. In the electron density image, the proposed method increased contrast‐to‐noise ratio (CNR) by more than 2.5 times and achieved <1.2% error for electron density values. On the anthropomorphic head phantom, the proposed method greatly improved the soft‐tissue contrast and the fine detail differentiation ability. In the selected ROIs on different human tissues, the differences between the CT number obtained by the proposed method and that by the two‐scan method were less than 4 HU. In the material images, the proposed method suppressed noise by over 75.5% compared with two‐scan results, and by over 40.4% compared with HYPR‐LR results. Implementation of the whole algorithm took 44.5 s for volumetric imaging, including projection preprocessing, FBP reconstruction, joint bilateral filtering, and material decomposition. Conclusions: Using down‐sampled projections in single‐scan DE‐CBCT, the proposed method could effectively and efficiently produce high‐quality DE‐CBCT images and low‐noise material decomposition images. This method demonstrated superior performance on spatial resolution enhancement, NPS preservation, noise reduction, and electron density accuracy, indicating better prospect in material differentiation and dose calculation. [ABSTRACT FROM AUTHOR]

Background: A significant proportion of the radiation dose from a PET-CT examination is dependent on the CT protocol, which should be optimised for clinical purposes. Matching protocols on different scanners within an imaging centre is important for the consistency of image quality and dose. This paper describes our experience translating low-dose CT protocols between scanner models utilising different automatic exposure control (AEC) methods and reconstruction algorithms. Methods: The scanners investigated were a newly installed Siemens Biograph mCT PET with 64-slice SOMATOM Definition AS CT using sinogram affirmed iterative reconstruction (SAFIRE) and two GE Discovery 710 PET scanners with 128-slice Optima 660 CT using adaptive statistical reconstruction (ASiR). Following exploratory phantom work, 33 adult patients of various sizes were scanned using the Siemens scanner and matched to patients scanned using our established GE protocol to give 33 patient pairs. A comparison of volumetric CT dose index (CTDIvol) and image noise within these patient pairs informed optimisation, specifically for obese patients. Another matched patient study containing 27 patient pairs was used to confirm protocol matching. Size-specific dose estimates (SSDEs) were calculated for patients in the second cohort. With the acquisition protocol for the Siemens scanner determined, clinicians visually graded the images to identify optimal reconstruction parameters. Results: In the first matched patient study, the mean percentage difference in CTDIvol for Siemens compared to GE was − 10.7% (range − 41.7 to 50.1%), and the mean percentage difference in noise measured in the patients' liver was 7.6% (range − 31.0 to 76.8%). In the second matched patient study, the mean percentage difference in CTDIvol for Siemens compared to GE was − 20.5% (range − 43.1 to 1.9%), and the mean percentage difference in noise was 19.8% (range − 27.0 to 146.8%). For these patients, the mean SSDEs for patients scanned on the Siemens and GE scanners were 3.27 (range 2.83 to 4.22) mGy and 4.09 (range 2.81 to 4.82) mGy, respectively. The analysis of the visual grading study indicated no preference for any of the SAFIRE strengths. Conclusions: Given the different implementations of acquisition parameters and reconstruction algorithms between vendors, careful consideration is required to ensure optimisation and standardisation of protocols. [ABSTRACT FROM AUTHOR]

Simultaneous acquisition of cone beam CT (CBCT) projections using both the kV and MV imagers of an image guided radiotherapy system reduces set-up scan times—a benefit to lung cancer radiation oncology patients—but increases noise in the 3D reconstruction. In this article, we present a kV‐MV scan time reduction technique that uses two noise-reducing measures to achieve superior performance. The first is a high-DQE multi-layer MV imager prototype. The second is a beam hardening correction algorithm which combines poly-energetic modeling with edge-preserving, regularized smoothing of the projections. Performance was tested in real acquisitions of the Catphan 604 and a thorax phantom. Percent noise was quantified from voxel values in a soft tissue volume of interest (VOI) while edge blur was quantified from a VOI straddling a boundary between air and soft material. Comparisons in noise/resolution performance trade-off were made between our proposed approach, a dose-equivalent kV-only scan, and a kV‐MV reconstruction technique previously published by Yin et al (2005 Med. Phys. 32 9). The proposed technique demonstrated lower noise as a function of spatial resolution than the baseline kV‐MV method, notably a 50% noise reduction at typical edge blur levels. Our proposed method also exhibited fainter non-uniformity artifacts and in some cases superior contrast. Overall, we find that the combination of a multi-layer MV imager, acquiring at a LINAC source energy of 2.5 MV, and a denoised beam hardening correction algorithm enables noise, resolution, and dose performance comparable to standard kV-imager only set-up CBCT, but with nearly half the gantry rotation time. [ABSTRACT FROM AUTHOR]

Purpose: Each radiotherapy center should have a site‐specific planning target volume (PTV) margins and image‐guided (IG) radiotherapy (IGRT) correction protocols to compensate for the geometric errors that can occur during treatment. This study developed an automated algorithm for the calculation and evaluation of these parameters from cone beam computed tomography (CBCT)‐based IG‐intensity modulated radiotherapy (IG‐IMRT) treatment. Methods and materials: A MATLAB algorithm was developed to extract the setup errors in three translational directions (x, y, and z) from the data logged by the CBCT system during treatment delivery. The algorithm also calculates the resulted population setup error and PTV margin based on the van Herk margin recipe and subsequently estimates their respective values for no action level (NAL) and extended no action level (eNAL) offline correction protocols. The algorithm was tested on 25 head and neck cancer (HNC) patients treated using IG‐IMRT. Results: The algorithms calculated that the HNC patients require a PTV margin of 3.1, 2.7, and 3.2 mm in the x‐, y‐, and z‐direction, respectively, without IGRT. The margin can be reduced to 2.0, 2.2, and 3.0 mm in the x‐, y‐, and z‐direction, respectively, with NAL and 1.6, 1.7, and 2.2 mm in the x‐, y‐, and z‐direction, respectively, with eNAL protocol. The results obtained were verified to be the same with the margins calculated using an Excel spreadsheet. The algorithm calculates the weekly offline setup error correction values automatically and reduces the risk of input data error observed in the spreadsheet. Conclusions: In conclusion, the algorithm provides an automated method for optimization and reduction of PTV margin using logged setup errors from CBCT‐based IGRT. [ABSTRACT FROM AUTHOR]

Purpose: To improve image quality and computed tomography (CT) number accuracy of daily cone beam CT (CBCT) through a deep learning methodology with generative adversarial network. Methods: One hundred and fifty paired pelvic CT and CBCT scans were used for model training and validation. An unsupervised deep learning method, 2.5D pixel‐to‐pixel generative adversarial network (GAN) model with feature mapping was proposed. A total of 12 000 slice pairs of CT and CBCT were used for model training, while ten‐fold cross validation was applied to verify model robustness. Paired CT–CBCT scans from an additional 15 pelvic patients and 10 head‐and‐neck (HN) patients with CBCT images collected at a different machine were used for independent testing purpose. Besides the proposed method above, other network architectures were also tested as: 2D vs 2.5D; GAN model with vs without feature mapping; GAN model with vs without additional perceptual loss; and previously reported models as U‐net and cycleGAN with or without identity loss. Image quality of deep‐learning generated synthetic CT (sCT) images was quantitatively compared against the reference CT (rCT) image using mean absolute error (MAE) of Hounsfield units (HU) and peak signal‐to‐noise ratio (PSNR). The dosimetric calculation accuracy was further evaluated with both photon and proton beams. Results: The deep‐learning generated sCTs showed improved image quality with reduced artifact distortion and improved soft tissue contrast. The proposed algorithm of 2.5 Pix2pix GAN with feature matching (FM) was shown to be the best model among all tested methods producing the highest PSNR and the lowest MAE to rCT. The dose distribution demonstrated a high accuracy in the scope of photon‐based planning, yet more work is needed for proton‐based treatment. Once the model was trained, it took 11–12 ms to process one slice, and could generate a 3D volume of dCBCT (80 slices) in less than a second using a NVIDIA GeForce GTX Titan X GPU (12 GB, Maxwell architecture). Conclusion: The proposed deep learning algorithm is promising to improve CBCT image quality in an efficient way, thus has a potential to support online CBCT‐based adaptive radiotherapy. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this study was to assess the suitability of using cone-beam computed tomography images (CBCTs) produced in a Leksell Gamma Knife (LGK) Icon system to generate electron density information for the convolution algorithm in Leksell GammaPlan (LGP) Treatment Planning System (TPS). Materials and Methods: A retrospective set of 30 LGK treatment plans generated for patients with multiple metastases was selected in this study. Both CBCTs and fan-beam CTs were used to provide electron density data for the convolution algorithm. Plan quality metrics such as coverage, selectivity, gradient index, and beam-on time were used to assess the changes introduced by convolution using CBCT (convCBCT) and planning CT (convCT) data compared to the homogeneous TMR10 algorithm. Results: The mean beam-on time for TMR10 and convCBCT was found to be 18.9 ± 5.8 minutes and 21.7 ± 6.6 minutes, respectively. The absolute mean difference between TMR10 and convCBCT for coverage, selectivity, and gradient index were 0.001, 0.02, and 0.0002, respectively. The calculated beam-on times for convCBCT were higher than the time calculated for convCT treatment plans. This is attributed to the considerable variation in Hounsfield values (HU) dependent on the position within the field of view. Conclusion: The artifacts from the CBCT's limited field-of-view and considerable HU variation need to be taken into account before considering the use of convolution algorithm for dose calculation on CBCT image datasets, and electron data derived from the onboard CBCT should be used with caution. [ABSTRACT FROM AUTHOR]

Background: Beam hardening and scattering artifacts from high-density objects such as dental implants adversely affect the image quality and subsequently the detection of fenestration or dehiscence around dental implants. Objective: This study aimed to assess the efficacy of metal artifact reduction (MAR) algorithm of two cone-beam computed tomography (CBCT) systems for detection of peri-implant fenestration and dehiscence. Material and Methods: In this experimental study, thirty-six titanium implants were placed in bone blocks of bovine ribs. Fenestration and dehiscence were created in the buccal bone around implants. CBCT images were obtained using Cranex 3D and ProMax 3D CBCT systems with and without MAR algorithm. Two experienced radiologists observed the images. Data were analyzed using SPSS software. The Kappa coefficient of agreement, the area under the receiver operating characteristic (ROC) curve, sensitivity, specificity, and accuracy of different imaging modalities were calculated and analyzed. Results: In both CBCT systems, the use of MAR algorithm decreased the area under the ROC curve and subsequently the diagnostic accuracy for the detection of fenestration and dehiscence. The sensitivity, specificity and accuracy of both CBCT systems were higher in absence of the MAR algorithm. The specificity of ProMax 3D for detection of fenestration was equal with/without the MAR algorithm. Conclusion: Although CBCT is suitable for detection of peri-implant defects, the application of the MAR algorithm does not enhance the detection of peri-implant fenestration and dehiscence. [ABSTRACT FROM AUTHOR]

Fixed-gantry radiation therapy has been proposed as a low-cost alternative to the conventional rotating-gantry radiation therapy, that may help meet the rising global treatment demand. Fixed-gantry systems require gravitational motion compensated reconstruction algorithms to produce cone-beam CT (CBCT) images of sufficient quality for image guidance. The aim of this work was to adapt and investigate five CBCT reconstruction algorithms for fixed-gantry CBCT images. The five algorithms investigated were Feldkamp–Davis–Kress (FDK), prior image constrained compressed sensing (PICCS), gravitational motion compensated FDK (GMCFDK), motion compensated PICCS (MCPICCS) (a novel CBCT reconstruction algorithm) and simultaneous motion estimation and iterative reconstruction (SMEIR). Fixed-gantry and rotating-gantry CBCT scans were acquired of 3 rabbits, with the rotating-gantry scans used as a reference. Projections were sorted into rotation bins, based on the angle of rotation of the rabbit during image acquisition. The algorithms were compared using the structural similarity index measure root mean square error, and reconstruction time. Evaluation of the reconstructed volumes showed that, when compared with the reference rotating-gantry volume, the conventional FDK algorithm did not accurately reconstruct fixed-gantry CBCT scans. Whilst the PICCS reconstruction algorithm reduced some motion artefacts, the motion estimation reconstruction methods (GMCFDK, MCPICCS and SMEIR) were able to greatly reduce the effect of motion artefacts on the reconstructed volumes. This finding was verified quantitatively, with GMCFDK, MCPICCS and SMEIR reconstructions having RMSE 17%–19% lower and SSIM 1% higher than a conventional FDK. However, all motion compensated fixed-gantry CBCT reconstructions had a 56%–61% higher RMSE and 1.5% lower SSIM than FDK reconstructions of conventional rotating-gantry CBCT scans. The results show that motion compensation is required to reduce motion artefacts for fixed-gantry CBCT reconstructions. This paper further demonstrates the feasibility of fixed-gantry CBCT scans, and the ability of CBCT reconstruction algorithms to compensate for motion due to horizontal rotation. [ABSTRACT FROM AUTHOR]

The aim of this systematic review was to assess the accuracy and reliability of automatic landmarking for cephalometric analysis of three-dimensional craniofacial images. We searched for studies that reported results of automatic landmarking and/or measurements of human head computed tomography or cone beam computed tomography scans in MEDLINE, Embase and Web of Science until March 2019. Two authors independently screened articles for eligibility. Risk of bias and applicability concerns for each included study were assessed using the QUADAS-2 tool. Eleven studies with test dataset sample sizes ranging from 18 to 77 images were included. They used knowledge-, atlas- or learning-based algorithms to landmark two to 33 points of cephalometric interest. Ten studies measured mean localization errors between manually and automatically detected landmarks. Depending on the studies and the landmarks, mean errors ranged from <0.50 mm to>5 mm. The two best-performing algorithms used a deep learning method and reported mean errors <2 mm for every landmark, approximating results of operator variability in manual landmarking. Risk of bias regarding patient selection and implementation of the reference standard were found, therefore the studies might have yielded overoptimistic results. The robustness of these algorithms needs to be more thoroughly tested in challenging clinical settings. PROSPERO registration number: CRD42019119637. [ABSTRACT FROM AUTHOR]