Search

The unique structural and electrochemical properties of graphene oxide (GO) make it an ideal material for the fabrication of biosensing devices. Therefore, in the present study, graphene oxide nanoparticles modified paper electrodes were used as a low-cost matrix for the development of an amperometric DNA sensor. The graphene oxide was synthesized using the modified hummers method and drop cast on a screen-printed paper electrode (SPPE) to enhance its electrochemical properties. Further, the GO/SPPE electrode was modified with a 5′NH2 labeled ssDNA probe specific to the htrA gene of Orientia tsutsugamushi using carbodiimide cross-linking chemistry. The synthesized GO was characterized using UV-Vis, FTIR, and XRD. The layer-by-layer modification of the paper electrode was monitored via FE-SEM, cyclic voltammetry, and electrochemical impedance spectroscopy (EIS). The sensor response after hybridization with single-stranded genomic DNA (ssGDNA) of O. tsutsugamushi was recorded using differential pulse voltammetry (DPV). Methylene blue (1 mM in PBS buffer, pH 7.2) was used as a hybridization indicator and [Fe(CN)6]−3/−4 (2.5 mM in PBS buffer, pH 7.2) as a redox probe during electrochemical measurements. The developed DNA sensor shows excellent sensitivity (1228.4 µA/cm2/ng) and LOD (20 pg/µL) for detection of O. tsutsugamushi GDNA using differential pulse voltammetry (DPV).

The early diagnosis of Alzheimer’s disease (AD) remains a challenge for medical scientists worldwide, leading to a number of research efforts that focus on biosensor development for AD biomarkers. However, the application of these complicated biosensors is limited in medical diagnosis, due to the difficulties in robust sensing platform development, high costs, and the necessity for technical professionals. We successfully developed a robust straightforward manufacturing process for the fabrication of multi-chamber paper devices using the wax printing method and exploited it to detect amyloid beta 42 oligomers (AβO42, a significant biomarker of AD) using copper-enhanced gold nanoprobe colorimetric immunoblotting. Small hydrophilic reaction chambers could concentrate the target sample to the desired size to improve the sensing performance. The copper-enhanced gold nanoprobe immunoblot using the designed multi-chamber platform exhibited a highly sensitive performance with a limit of detection of 320 pg/mL by the naked eye and 23.7 pg/mL by a smartphone camera. This process from sensing manufacture to sensing conduction is simple to perform whenever medical technicians require time- and cost-savings, without complicated instruments or the need for technical professionals, making it feasible to serve as a diagnostic tool worldwide for the early monitoring of AD and scalable devices for the sensing application of various biomarkers in clinical settings.

The main problem for the expansion of the use of microfluidic paper-based analytical devices and, thus, their mass production is their inherent lack of fluid flow control due to its uncontrolled fabrication protocols. To address this issue, the first step is the generation of uniform and reliable microfluidic channels. The most common paper microfluidic fabrication method is wax printing, which consists of two parts, printing and heating, where heating is a critical step for the fabrication of reproducible device dimensions. In order to bring paper-based devices to success, it is essential to optimize the fabrication process in order to always get a reproducible device. Therefore, the optimization of the heating process and the analysis of the parameters that could affect the final dimensions of the device, such as its shape, the width of the wax barrier and the internal area of the device, were performed. Moreover, we present a method to predict reproducible devices with controlled working areas in a simple manner. The authors would like to acknowledge funding support from Gobierno de España, Ministerio de Economía y Competitividad, with Grant No. BIO2016-80417-P (AEI/FEDER, UE), the Gobierno Vasco Dpto. Educación for the consolidation of the research groups (IT1271-19) and from Proyectos Colaborativos from the University of the Basque Country UPV/EHU, BIOPLASMOF (COLAB19/05). This project received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 778001.

Immunoassay has the advantages of high sensitivity, high specificity, and simple operation, and has been widely used in the detection of mycotoxins. For several years, time-resolved fluorescence immunochromatography (TRFIA) paper-based sensors have attracted much attention as a simple and low-cost field detection technology. However, a traditional TRFIA paper-based sensor is based on antibody labeling, which cannot easily meet the current detection requirements. A second antibody labeling method was used to amplify the fluorescence signal and improve the detection sensitivity. Polystyrene fluorescent microspheres were combined with sheep anti-mouse IgG to prepare fluorescent probes (Eu-IgGs). After the probe fully reacted with the antibody (Eu-IgGs-Abs) in the sample cell, it was deployed on the paper-based sensor using chromatography. Eu-IgGs-Abs that were not bound to the target were captured on the T-line, while those that were bound were captured on the C-line. The paper-based sensor reflected the corresponding fluorescence intensity change. Because a single molecule of the deoxynivalenol antibody could bind to multiple Eu-IgGs, this method could amplify the fluorescence signal intensity on the unit antibody and improve the detection sensitivity. The working standard curve of the sensor was established under the optimum working conditions. It showed the lower limit of detection and higher recovery rate when it was applied to actual samples and compared with other methods. This sensor has the advantages of high sensitivity, good accuracy, and good specificity, saving the amount of antibody consumed and being suitable for rapid field detection of deoxynivalenol.

Flexible screen-printed electrodes (HP) were fabricated on stone paper substrate and amperometrically modified with gold nanoparticles (HP-AuNPs). The modified electrode displayed improved electronic transport properties, reflected in a low charge-transfer resistance (1220 Ω) and high apparent heterogeneous electron transfer rate constant (1.94 × 10−3 cm/s). The voltammetric detection of dopamine (DA) was tested with HP and HP-AuNPs electrodes in standard laboratory solutions (pH 6 phosphate-buffered saline (PBS)) containing various concentrations of analyte (10−7–10−3 M). As expected, the modified electrode exhibits superior performances in terms of linear range (10−7–10−3 M) and limit of detection (3 × 10−8 M), in comparison with bare HP. The determination of DA was tested with HP-AuNPs in spiked artificial urine and in pharmaceutical drug solution (ZENTIVA) that contained dopamine hydrochloride (5 mg/mL). The results obtained indicated a very good DA determination in artificial urine without significant matrix effects. In the case of the pharmaceutical drug solution, the DA determination was affected by the interfering species present in the vial, such as sodium metabisulfite, maleic acid, sodium chloride, and propylene glycol.

A simple, low-cost technique has been developed for the rapid fabrication of single-layered paper-based microfluidic devices (&mu, PADs). This technique, for the first time, made use of the deposition of patterned adhesive tape into the filter paper to construct hydrophobic barriers, with the help of toluene. Unlike other reported multi-layered &mu, PADs that merely made use of adhesive tape as a separate layer for sealing or fluid flow controlling, the patterned adhesive tape was simultaneously dissolved and penetrated into the filter paper, which resulted in the successful transfer of the pattern from the tape to the filter paper. To demonstrate the effectiveness of this approach, nitrite and glucose were individually measured, detection limits as low as 0.015 &plusmn, 0.004 mM and 0.022 &plusmn, 0.006 mM were reported for nitrite and glucose, respectively. Multiplexed analysis of both analytes was also carried out with respective detection limits of 0.048 &plusmn, 0.005 mM and 0.025 &plusmn, 0.006 mM for nitrite and glucose. The application of the method was demonstrated by measuring nitrite and glucose in spiked artificial urine samples and satisfied recovery results were obtained.

We report for the first time a distance-based paper device based on gold/silver core shell nanoparticles (Au@Ag NPs) for a simple, inexpensive, instrument-free, and portable determination of cyanide by the naked eye. Au@Ag NPs immobilized on a paper channel were etched by cyanide ions so that a yellow color band length of Au@Ag NPs is proportional to a decrease in the cyanide concentration. Quantification is achieved by measuring color length, thus eliminating the need to differentiate hues and intensities by the user, and the processing data of each imaging device. Moreover, the paper-based headspace extraction was combined with the distance-based paper device to improve the sensitivity. The enrichment factor was found to be 30-fold and the linearity was found in the range 0.05&ndash, 1 mg L&minus, 1. The naked eye detection limit was 10 &mu, g L&minus, 1 where the World Health Organization (WHO) have regulated the maximum level of cyanide in drinking water as 70 &mu, 1. Our proposed device also showed no interference from common cations and anions presenting in seawater and waste water including thiocyanate, chloride. Finally, our device has been successfully applied to determine cyanide ions in seawater, drinking water, tap water and wastewater providing satisfactory precision and accuracy.

We are glad to share with you our first Journal Club and to highlight some of the most interesting papers published recently. We hope we will tease your curiosity and encourage you to read full papers outside of your research area, which you may not have read otherwise. The Biomolecules Scientific Board wishes you an exciting read.

Paper-based sensors fabricated using the pencil-on-paper method are expected to find wide usage in many fields owing to their low cost and high reproducibility. Here, hydrogen (H2) detection was realized by applying palladium (Pd) nanoparticles (NPs) to electronic circuits printed on paper using a metal mask and a pencil. We confirmed that multilayered graphene was produced by the pencil, and then characterized Pd NPs were added to the pencil marks. To evaluate the gas-sensing ability of the sensor, its sensitivities and reaction rates in the presence and absence of H2 were measured. In addition, sensing tests performed over a wide range of H2 concentrations confirmed that the sensor had a detection limit as low as 1 ppm. Furthermore, the sensor reacted within approximately 50 s at all H2 concentrations tested. The recovery time of the sensor was 32 s at 1 ppm and 78 s at 1000 ppm. Sensing tests were also performed using Pd NPs of different sizes to elucidate the relationship between the sensing rate and catalyst size. The experimental results confirmed the possibility of fabricating paper-based gas sensors with a superior sensing capability and response rate.

This paper describes a paper-based biochemical sensor that realizes redox cycling with close interelectrode distance. Two electrodes, the generator and collector electrodes, can detect steady-state oxidation and reduction currents when suitable potential is held at each electrode. The sensor has two gold plates on both sides of a piece of chromatography paper and defines the interelectrode distance by the thickness of the paper (180 μm) without any micro-fabrication processes. Our proposed sensor geometry has successfully exhibited signatures of redox cycling. As a result, the concentration of ferrocyanide as reversible redox molecules was successfully quantified under the interference by ascorbic acid as a strong irreversible reducing agent. This was possible because the ascorbic acids are completely consumed by the irreversible reaction, while maintaining redox cycling of reversible ferrocyanide. This suggests that a sensor based on the redox cycling method will be suitable for detecting target molecules at low concentration.

Made available in DSpace on 2022-04-29T08:32:41Z (GMT). No. of bitstreams: 0 Previous issue date: 2021-09-01 This work addresses a method that combines immunomagnetic separation (IMS) and paper-based nucleic acid immunochromatographic assay for the sensitive detection of Mycolicibacterium fortuitum (basonym Mycobacterium fortuitum) In particular, the preconcentration of the bacteria was achieved by using magnetic particles modified with an antibody specific towards mycobacteria. Following the IMS, the bacteria were lysed, and the genome was amplified by double-tagging PCR, using a set of primers specific for the 16S rRNA gene for Mycobacterium. During the amplification, the amplicons were labeled with biotin and digoxigenin tags. Moreover, a comparative study of paper-based immunochromatographic platforms, relying on vertical and lateral flow and on the use of streptavidin gold nanoparticles as a signal generating system, was also performed. The visual readout was achieved when the gold-modified amplicons were captured by the anti-DIG antibody in the test line. The analytical performance of both methods, nucleic acid vertical flow (NAVF) and nucleic acid lateral flow (NALF), is also discussed. Although NALF showed lower limit of detections (LODs), both NALF and NAVF combined with IMS were able to detect the required LOD in hemodialysis water, becoming two promising and useful techniques for the rapid screening of water supplies in hemodialysis centers, to prevent the exposure of immunosuppressed patients to contaminated sources. Departament de Química Universitat Autònoma de Barcelona Department of Analytical Chemistry Institute of Chemistry São Paulo State University Departament de Genètica i de Microbiologia Facultat de Biociències Universitat Autònoma de Barcelona Institute of Biotechnology and Biomedicine Universitat Autònoma de Barcelona Department of Analytical Chemistry Institute of Chemistry São Paulo State University

This paper presents a novel method of fabricating an enzymatic biosensor for breath analysis using chromatography paper as enzyme supporting layer and a liquid phase layer on top of screen printed carbon electrodes. We evaluated the performance with ethanol vapor being one of the breathing ingredients. The experimental results show that our sensor is able to measure the concentration of ethanol vapor within the range of 50 to 500 ppm. These results suggest the ability of detecting breath ethanol, and it can possibly be applied as a generic vapor biosensor to a wide range of diseases.

Effluent reuse is a common practice for sustainable industrial water use. Salt removal is usually carried out by a combination of membrane processes with a final reverse osmosis (RO). However, the presence of silica limits the RO efficiency due to its high scaling potential and the difficulty of cleaning the fouled membranes. Silica adsorption has many advantages compared to coagulation and precipitation at high pHs: pH adjustment is not necessary, the conductivity of treated waters is not increased, and there is no sludge generation. Therefore, this study investigates the feasibility of using pseudoboehmite and its calcination product (γ-Al2O3) for silica adsorption from a paper mill effluent. The effect of sorbent dosage, pH, and temperature, including both equilibrium and kinetics studies, were studied. γ-Al2O3 was clearly more efficient than pseudoboehmite, with optimal dosages around 2.5–5 g/L vs. 7.5–15 g/L. The optimum pH is around 8.5–10, which fits well with the initial pH of the effluent. The kinetics of silica adsorption is fast, especially at high dosages and temperatures: 80–90% of the removable silica is removed in 1 h. At these conditions, silica removal is around 75–85% (&lt, 50 mg/L SiO2 in the treated water).

A detection method for type-II pyrethroids in an environmental water sample using a microfluidic paper-based analytical device (&micro, PAD) is reported here. The detection approach is based on the formation of cyanide from the hydrolysis of type-II pyrethroids and the colorimetric detection of cyanide on a layer-based &micro, PAD. Parafilm and inexpensive laminating pouches were used to create a hydrophobic barrier for the assay on the &micro, PAD. This detection approach was selective to type-II pyrethroids in water for which an environmental water sample was tested. The calibration curves for cypermethrin, deltamethrin, cyhalothrin, and fenvalerate ranged from 2 to 40 &micro, g/mL without sample preconcentration. The lower concentrations of type-II pyrethroids can be assessed by including a preconcentration step prior to the detection on a &micro, PAD. This detection system provides an alternative platform for fast, semiquantitative testing for pesticide contamination in environmental surface water by allowing for portability, low reagent/sample consumption, and low-cost testing.

The dried blood spot (DBS) sampling has a lot of advantages in comparison with the &ldquo, standard&rdquo, venous blood collecting, such as small collection volume, painless and easy sample collection with minimal training required, stable and transportable at ambient temperatures, etc. The aim of this study was to determine the comparability of four different types of DBS sampling (HemaSpot&trade, HF Blood Collection Device, Whatman&reg, 903 Protein Saver Snap Apart Card, card ImmunoHealth&trade, and glass fiber strip ImmunoHealth&trade, ) for analysis of the global metabolites profile. All the samples were collected from the same person at the same time and stored at room temperature for four weeks in order to exclude all possible deviations deriving from biological variances and to evaluate sample storage stability. Metabolome profiling by direct injection of a deproteinized capillary blood DBS sample into an electrospray ion source of a hybrid quadrupole time-of-flight mass spectrometer was used. Differences in the metabolomics profile were found between the different DBS collection materials, especially for ImmunoHealth&trade, card and ImmunoHealth&trade, glass fiber strip. However, our results indicate that the analytical performance of all tested DBS sampling materials showed consistent results overall detected metabolites and no dramatic changes between them in the metabolic composition during the storage time.

Industrial process tomography (IPT) is a set of multi-dimensional sensor technologies and methods that aim to provide unparalleled internal information on industrial processes used in many sectors [...]

Tuning the sensing properties of spiropyrans (SPs), which are one of the photochromic molecules useful for colorimetric sensing, is important for efficient analysis, but their synthetic modification is not always simple. Herein, we introduce an alkyne-functionalized SP, the modification of which would be easily achieved via Cu-catalyzed azide-alkyne cycloaddition ("click reaction"). The alkyne-SP was conjugated with a bis(triethylene glycol)-benzyl group (EG-BtSP) or a simple benzyl group (BtSP), forming a triazole linkage from the click reaction. The effects of auxiliary groups to SP were tested on metal-ion sensing and cyanide detection. We found that EG-BtSP was more Ca2+-sensitive than BtSP in acetonitrile, which were thoroughly examined by a continuous variation method (Job plot) and UV-VIS titrations, followed by non-linear regression analysis. Although both SPs showed similar, selective responses to cyanide in a water/acetonitrile co-solvent, only EG-BtSP showed a dramatic color change when fabricated on paper, highlighting the important contributions of the auxiliary groups.

Metabolites is instituting annual awards to recognize the most outstanding papers in metabolism and metabolomics published in Metabolites. [...]

Utilization of microbial enzymes has been widely reported for centuries, but the commercial use of enzymes has been recently adopted. Particularly, cellulases have been utilized in various commercial sectors including agriculture, brewing, laundry, pulp and paper and textile industry. Cellulases of microbial origin have shown their potential application in various commercial sectors including textile, pulp and paper, laundry, brewing, agriculture and biofuel. Cellulases have diversified applications in the food industry, food service, food supply and its preservation. Indeed, cellulases can tenderize fruits, clarify the fruit juices, reduce roughage in dough, hydrolyze the roasted coffee, extract tea polyphenols and essential oils from olives and can increase aroma and taste in food items. However, their role in food industries has by and large remained neglected. The use of immobilized cellulases has further expanded their application in fruit and vegetable processing as it potentiates the catalytic power and reduces the cost of process. Technological and scientific developments will further expand their potential usage in the food industry.

Printed electronics is an expanding research field that can reach the goal of reducing the environmental impact on electronics exploiting renewable and biodegradable materials, like paper. In our work, we designed and tested a new method for fabricating hybrid smart devices on cellulose substrates by aerosol jet printing (AJP) and photonic curing, also known as flash lamp annealing (FLA), capable to cure low temperature materials without any damage. Three different cellulose-based materials (chromatographic paper, photopaper, cardboard) were tested. Multilayer capability and SMDs (surface mount devices) interconnections are possible permitting high flexibility in the fabrication process. Electrical and geometrical tests were performed to analyze the behavior of printed samples. Resulted resistivities are 26.3 &times, 10&minus, 8 m on chromatographic paper, 22.3 &times, 8 m on photopaper and 13.1 &times, 8 m on cardboard. Profilometer and optical microscope evaluations were performed to state deposition quality and penetration of the ink in cellulose materials (thicknesses equal to 24.9, 28.5, and 51 &mu, m respectively for chromatographic paper, photopaper, and cardboard). Furthermore, bending (only chromatographic paper did not reach the break-up) and damp environment tests (no significant variations in resistance) where performed. A final prototype of a complete functioning multilayer smart devices on cellulose 3D-substrate is shown, characterized by multilayers, capacitive sensors, SMDs interconnections.

The Lateral Flow Immunoassay (LFIA) is by far one of the most successful analytical platforms to perform the on-site detection of target substances. LFIA can be considered as a sort of lab-in-a-hand and, together with other point-of-need tests, has represented a paradigm shift from sample-to-lab to lab-to-sample aiming to improve decision making and turnaround time. The features of LFIAs made them a very attractive tool in clinical diagnostic where they can improve patient care by enabling more prompt diagnosis and treatment decisions. The rapidity, simplicity, relative cost-effectiveness, and the possibility to be used by nonskilled personnel contributed to the wide acceptance of LFIAs. As a consequence, from the detection of molecules, organisms, and (bio)markers for clinical purposes, the LFIA application has been rapidly extended to other fields, including food and feed safety, veterinary medicine, environmental control, and many others. This review aims to provide readers with a 10-years overview of applications, outlining the trends for the main application fields and the relative compounded annual growth rates. Moreover, future perspectives and challenges are discussed.

Nowadays, autonomous vehicle is an active research area, especially after the emergence of machine vision tasks with deep learning. In such a visual navigation system for autonomous vehicle, the controller captures images and predicts information so that the autonomous vehicle can safely navigate. In this paper, we first introduced small and medium-sized obstacles that were intentionally or unintentionally left on the road, which can pose hazards for both autonomous and human driving situations. Then, we discuss Markov random field (MRF) model by fusing three potentials (gradient potential, curvature prior potential, and depth variance potential) to segment the obstacles and non-obstacles into the hazardous environment. Since the segment of obstacles is done by MRF model, we can predict the information to safely navigate the autonomous vehicle form hazardous environment on the roadway by DNN model. We found that our proposed method can segment the obstacles accuracy from the blended background road and improve the navigation skills of the autonomous vehicle.

This paper goes through the process of first designing a feedback system that allows for the measuring of impedance while using the hot snare polypectomy method. The electrosurgical unit used in this study was the Olympus PSD-30. After the impedance-controlled feedback system was completed, the device was tested under a range of power settings from 10 W–50 W. The test was performed ex vivo using porcine colon samples. Using the information gathered from these tests, a technique of determining the threshold of perforation and implementing a system to automatically stop the applied current from the PSD-30 was developed. The data showed that after an increase in impedance of 25% from that of the initially measured impedance, perforation ensued in the tissue samples. Using this information, the device was programmed to interrupt the PSD-30 at this threshold point. This final design was tested and proved able to automatically prevent the event of perforation from occurring, resulting in the ability to prevent serious complications.

Bottom-up, end-user based feed, and food analysis through smartphone quantification of lateral flow assays (LFA) has the potential to cause a paradigm shift in testing capabilities. However, most developed devices do not test the presence of and implications of inter-phone variation. Much discussion remains regarding optimum color space for smartphone colorimetric analyses and, an in-depth comparison of color space performance is missing. Moreover, a light-shielding box is often used to avoid variations caused by background illumination while the use of such a bulky add-on may be avoidable through image background correction. Here, quantification performance of individual channels of RGB, HSV, and LAB color space and &Delta, RGB was determined for color and color intensity variation using pH strips, filter paper with dropped nanoparticles, and colored solutions. LAB and HSV color space channels never outperformed the best RGB channels in any test. Background correction avoided measurement variation if no direct sunlight was used and functioned more efficiently outside a light-shielding box (prediction errors &lt, 5%/35% for color/color intensity change). The system was validated using various phones for quantification of major allergens (i.e., gluten in buffer, bovine milk in goat milk and goat cheese), and, pH in soil extracts with commercial pH strips and LFA. Inter-phone variation was significant for LFA quantification but low using pH strips (prediction errors &lt, 10% for all six phones compared). Thus, assays based on color change hold the strongest promise for end-user adapted smartphone diagnostics.

There is a growing consumer preference for high quality extra virgin olive oil (EVOO) with health-promoting and sensory properties that are associated with a higher content of phenolic and volatile compounds. To meet this demand, several novel and emerging technologies are being under study to be applied in EVOO production. This review provides an update of the effect of emerging technologies (pulsed electric fields, high pressure, ultrasound, and microwave treatment), compared to traditional EVOO extraction, on yield, quality, and/or content of some minor compounds and bioactive components, including phenolic compounds, tocopherols, chlorophyll, and carotenoids. In addition, the consumer acceptability of EVOO is discussed. Finally, the application of these emerging technologies in the valorization of olive mill wastes, whose generation is of concern due to its environmental impact, is also addressed. This research was funded by CYCIT (AGL2016- 75329-R), CIBEROBN from the Instituto de Salud Carlos III, ISCIII from the Ministerio de Ciencia, Innovación y Universidades, (AEI/FEDER, UE), and Generalitat de Catalunya (GC) (2017SGR 196). M.-P. thanks the Ministry of Science Innovation (MICIU/FEDER) for the project (RTI2018-093974-B-I00). A.L.Y. wishes to thanks the Consejo Nacional de Ciencia y Tecnología (CONACYT) of Mexico for the doctoral scholarship. A.O.C. thanks the Ministerio de Ciencia, Innovación y Universidades for the FPU contract (FPU18/03119). J.L.C. thanks the Ministry of Science Innovation and Universities for the FPI contract (BES-2017-080017). A.V.Q. thanks the Ministry of Science Innovation and Universities for the Ramon y Cajal contract (RYC-2016-19355).

Chitosan is obtained from chitin that in turn is recovered from marine crustacean wastes. The recovery methods and their varying types and the advantages of the recovery methods are briefly discussed. The bioactive properties of chitosan, which emphasize the unequivocal deliverables contained by this biopolymer, have been concisely presented. The variations of chitosan and its derivatives and their unique properties are discussed. The antioxidant properties of chitosan have been presented and the need for more work targeted towards harnessing the antioxidant property of chitosan has been emphasized. Some portions of the crustacean waste are being converted to chitosan; the possibility that all of the waste can be used for harnessing this versatile multifaceted product chitosan is projected in this review. The future of chitosan recovery from marine crustacean wastes and the need to improve in this area of research, through the inclusion of nanotechnological inputs have been listed under future perspective.

Hollow fibre membrane contactor (HFMC) technology has been developed for CO2 absorption primarily using synthetic gas, which neglects the critical impact that trace contaminants might have on separation efficiency and robustness in industrial gases. This study, therefore, commissioned a demonstration-scale HFMC for CO2 separation at a full-scale anaerobic digester facility to evaluate membrane integrity over six months of operation on real biogas. The CO2 capture efficiency identified using real biogas was benchmarked at comparable conditions on synthetic gas of an equivalent partial pressure, and an equivalent performance identified. Two HFMC were subsequently compared, one with and one without a pre-treatment stage that targeted particulates, volatile organic compounds (VOCs) and humidity. Similar CO2 separation efficiency was again demonstrated, indicating limited impact within the timescale evaluated. However, gas phase pre-treatment is advised in order to ensure robustness in the long term. Over longer-term operation, a decline in CO2 separation efficiency was observed. Membrane autopsy identified shell-side deposition, where the structural morphology and confirmation of amide I and II groups, indicated biofouling. Separation efficiency was reinstated via chemical cleaning, which demonstrated that proactive maintenance could minimise process risk.

Background: phenolic compounds are bioactive chemical species derived from fruits and vegetables, with a plethora of healthy properties. In recent years, there has been a growing interest in persimmon (Diospyros kaki L.f.) due to the presence of many different classes of phenolic compounds. However, the analysis of individual phenolic compounds is difficult due to matrix interferences. Methods: the aim of this research was the evaluation of individual phenolic compounds and antioxidant capacity of the pulp of two varieties of persimmon (Rojo Brillante and Triumph) by an improved extraction procedure together with a UPLC-Q-TOF-MS platform. Results: the phenolic compounds composition of persimmon was characterized by the presence of hydroxybenzoic and hydroxycinnamic acids, hydroxybenzaldehydes, dihydrochalcones, tyrosols, flavanols, flavanones, and flavonols. A total of 31 compounds were identified and 17 compounds were quantified. Gallic acid was the predominant phenolic compounds found in the Rojo Brillante variety (0.953 mg/100 g) whereas the concentration of p-hydroxybenzoic acid was higher in the Triumph option (0.119 mg/100 g). Conclusions: the results showed that the Rojo Brillante variety had higher quantities of phenolic compounds than the Triumph example. These data could be used as reference in future phenolic compound databases when individual health effects of phenolic compounds become available., Spanish Ministry of Economy and Competitiveness AGL2014-53895-R, European Union (EU)

Syngas fermentation by methanogens is a novel process to purify biogas. Methanogens are able to ferment non-desirable CO2, H2, and CO to methane. However, to use methanogens on an industrial scale, more research has to be done. There are studies that discuss the growth of methanogens on syngas in combination with acetate. In this research, growth of methanogens on syngas as sole carbon source is discussed. Effluent of an anaerobic fed-batch was selectively cultivated with syngas in 400 mL Eppendorf© bioreactors. After a period of 7 days, fifteen 120 mL flasks were filled with three different liquid-to-gas ratios (1:1, 1:3, 1:5). Results showed that different liquid-to-gas ratios change the metabolic preference of the anaerobic microbial community. Moreover, complete conversion in a four-to-eight-day period, via the carboxidotrophic pathway, was observed in all three liquid-to-gas ratios.

The management and proper use of the Urban Public Transport Systems (UPTS) constitutes a critical field that has not been investigated in accordance to its relevance and urgent idiosyncrasy within smart cities realm. Swarm Intelligence is a very promising paradigm to deal with such complex and dynamic systems. It presents robust, scalable and self-organized behaviour to deal with dynamic and fast changing systems. The intelligence of cities can be modelled as a swarm of digital telecommunication networks (the nerves), ubiquitously embedded intelligence, sensors and tags, and software. In this paper, a new approach based on the use of the Natural Computing paradigm and Collective Computation is shown, more concretely taking advantage of an Ant Colony Optimization algorithm variation and Fireworks algorithms in order to build a system that makes the complete control of the UPTS a tangible reality.

Water hardness (WH) is a useful parameter for testing household water, such as drinking, cooking, and washing water. Many countries around the world use pipeline water in their houses, but there is a need to monitor the WH because hard water has a negative impact on appliances. Currently, WH is often measured using chemical dye-based WH indicators, and these techniques require expensive equipment, and trained personnel. Therefore, a low-cost and simple measurement method has been desired. Here, we report LOTUS-W, which consists of a luciferase, Nanoluc, a yellow fluorescent protein Venus, and a Ca2+/Mg2+ detection domain of human centrin 3. The binding of Ca2+/Mg2+ to this indicator changes the conformation of human centrin 3, and induces bioluminescence resonance energy transfer (BRET) from Nanoluc to Venus, which changes its emission spectrum about 140%. The dissociation constants of LOTUS-W for Ca2+/Mg2+ are approximately several mM, making it suitable for measuring WH in the household water. With this indicator in combination with a smartphone, we have demonstrated that it is possible to evaluate WH easily and quickly. This novel indicator has the potential to be used for measuring not only household water but also water used in the food industry, etc.

This study reports the adsorption capacity of lead Pb2+ and cadmium Cd2+ of biochar obtained from: peanut shell (BCM), &ldquo, chonta&rdquo, pulp (BCH) and corn cob (BZM) calcined at 500, 600 and 700 &deg, C, respectively. The optimal adsorbent dose, pH, maximum adsorption capacity and adsorption kinetics were evaluated. The biochar with the highest Pb2+ and Cd2+ removal capacity is obtained from the peanut shell (BCM) calcined at 565 &deg, C in 45 min. The optimal experimental conditions were: 14 g L&minus, 1 (dose of sorbent) and pH between 5 and 7. The sorption experimental data were best fitted to the Freundlich isotherm model. High removal rates were obtained: 95.96% for Pb2+ and 99.05. for Cd2+. The BCH and BZM revealed lower efficiency of Pb2+ and Cd2+ removal than BCM biochar. The results suggest that biochar may be useful for the removal of heavy metals (Pb2+ and Cd2+) from drinking water.

Septic tanks are widely deployed for off-grid sewage management but are typified by poor treatment performance, discharge of polluting effluents and the requirement for frequent de-sludging. The Solar Septic Tank (SST) is a novel septic tank design that uses passive heat from the sun to raise in-tank temperatures and improves solids degradation, resulting in a cleaner effluent. Treatment has been shown to exceed conventional systems, however, the underlying biology driving treatment in the system is poorly understood. We used next generation sequencing (Illumina Miseq (San Diego, CA, USA), V4 region 16S DNA) to monitor the microbiology in the sludge and effluent of two mature systems, a conventional septic tank and an SST, during four months of routine operation in Bangkok, Thailand, and evaluated the ecology against a suite of operating and performance data collected during the same time period. Significant differences were observed between the microbiome of the sludge and effluent in each system and the dominant taxa in each appeared persistent over time. Furthermore, variation in the microbial community composition in the system effluents correlated with effluent water quality and treatment performance parameters, including the removal of chemical and biochemical oxygen demand and the concentration of fecal and total coliforms in the effluent. Thus, we propose that a wide-scale survey of the biology underlying decentralised biotechnologies for sewage treatment such as the SST could be conducted by sampling system effluent rather than sampling sludge. This is advantageous as accessing sludge during sampling is both hazardous and potentially disruptive to the anaerobic methanogenic consortia underlying treatment in the systems.

Energy conservation is one of the most critical problems in Internet of Things (IoT). It can be achieved in several ways, one of which is to select the optimal route for data transfer. IPv6 Routing Protocol for Low Power and Lossy Networks (RPL) is a standardized routing protocol for IoT. The RPL changes its path frequently while transmitting the data from source to the destination, due to high data traffic in dense networks. Hence, it creates data traffic across the nodes in the networks. To solve this issue, we propose Energy and Delay Aware Data aggregation in Routing Protocol (EDADA-RPL) for IoT. It has two processes, namely parent selection and data aggregation. The process of parent selection uses routing metric residual energy (RER) to choose the best possible parent for data transmission. The data aggregation process uses the compressed sensing (CS) theory in the parent node to combine data packets from the child nodes. Finally, the aggregated data transmits from a downward parent to the sink. The sink node collects all the aggregated data and it performs the reconstruction operation to get the original data of the participant node. The simulation is carried out using the Contiki COOJA simulator. EDADA-RPL’s performance is compared to RPL and LA-RPL. The EDADA-RPL offers good performance in terms of network lifetime, delay, and packet delivery ratio.

The potential antiplatelet aggregation effects of mango pulp and its by-products (peel, husk seed, and seed) due to the presence of bioactive compounds were explored. Among them, mango seed exhibited a 72% percentage inhibition of platelet aggregation induced by adenosine 5’-diphosphate (ADP) agonist with a demonstrated dose-dependent effect. This biological feature could be caused by the chemical differences in phenolic composition. Mango seed was especially rich in monogalloyl compounds, tetra- and penta-galloylglucose, ellagic acid, mangiferin, and benzophenones such as maclurin derivatives and iriflophenone glucoside. Mangiferin showed an inhibitory effect of 31%, suggesting its key role as one of the main contributors to the antiplatelet activity of mango seed. Therefore, mango seed could be postulated as a natural source of bioactive compounds with antiplatelet properties to design functional foods or complementary therapeutic treatments., Ibero-American Program of Science and Technology for Development, Red iberoamericana de aprovechamiento integral de alimentos autóctonos subutilizados (ALSUB-CYTED, 118RT0543). Financial support of projects from program of aid for R + D + i of the Andalusian plan for research, development and innovation (PAIDI 2020) of Junta de Andalucía and Junta de Comunidades de Castilla-La Mancha (SBPLY/17/180501/000509).

This paper describes a new method for the selection of an appropriate signal lineElectromagnetic Interference (EMI) filter. To date, EMI filter selection has been based onthe measurement of the radiation of the entire device. The new selection method based onthe signal’s Fast Fourier Transform (FFT) measurement has proved to be efficient. The EMIfilter is optimized separately for each line. The method described in this paper involving aCentral Processor Unit (CPU) module demonstrates that the proposed FFT-based selectionmethod is better than the radiation-based one. The radiation level in the frequency range 30MHz to 1 GHz is lower for approximate 2 – 6 dBμV/m.

In a fire investigation the rapid detection of the presence of ignitable liquids like gasoline is of great importance as it allows appropriate treatment of the remains, the identification of prevention methods and detects the possible presence of an arsonist. In some cases, analysts cannot access the fire scene in the first few hours due to the dangers involved in the situation and, as a consequence, phenomena such as weathering start. Ignitable liquid weathering is an evaporation process that results in an increase in the abundance of non-volatile compounds relative to volatile compounds, and this process changes the chemical composition. In the present work, the weathering of samples of gasoline at different times (from 0 h to a month) has been studied using an electronic nose (eNose). The influence of the volume used (40 µL and 80 µL) and the type of support (cork, wood, paper and cotton sheet) has been studied. Chemometric tools have been used with the aim of ascertaining the weathering time for which the developed method is capable of detecting the presence of gasoline. The eNose was able to discriminate samples of weathered gasoline. The support used for the samples did not seem to have an influence on the detection and the system.

One of the main factors limiting active biomonitoring with aquatic mosses is the lack of sufficient material. A laboratory culture of the moss would solve this problem and thus convert the technique into a valuable biotechnological tool for monitoring water quality. With this aim, we first established small and large scale axenic in vitro culture systems for the aquatic moss Fontinalis antipyretica. We then attempted to enhance the growth rate of the cultures by modifying temperature, photoperiod and medium composition (N:P ratio, P concentration, CO2 supply, NH4NO3 supply and sucrose supply). None of these modifications greatly increased the in vitro growth rate. However, the growth rates were sufficiently high (relative to the initial weight of the cultures) in both systems (45 and 6 mg·day−1·g−1 for flasks and bioreactors respectively) to enable the production of large amounts of material. The ability to culture the material will substantially improve the applicability of the moss bag technique This work was funded by MINECO project CTM2015-70578-P. The authors belong to the Galician Competitive Research Group GRC/GPC2016-002 and to the CRETUS Strategic Partnership (AGRUP2015/02). All of these programmes are co-funded by FEDER (EU) SI