Search

Industrial energy management is critical to ensuring efficient energy usage, market viability, and greenhouse gas emission reductions. In this study, the aim is to investigate energy management practices in paper and pulp industries (PPI) of Bangladesh. The study identifies several barriers to adopt energy management practices; "Lack of governmental attention", "Inadequate staff awareness" and "limited access to capital" are identified as the major constraints. In addition, HVAC systems and compressed air systems present higher barriers compared to electrical motor and pump systems while looking at the barriers by technology areas. On the other hand, "Owner's demand", "Commitment from the top management" and "Pressure from the customers and different non-Governmental organization" are found to be the dominant drivers of energy management in the studied PPI. Energy management practices can enhance the energy efficiency approximately by 4–5 % according to the study. Furthermore, this study reveals that the majority of PPIs are unaware of the energy service companies (ESCO) with the lack of a standardized system for energy audit, as well as a lack of trust and information, appearing to be the obstacles behind this. • Energy management practices in paper and pulp industries of Bangladesh are shown. • Barriers and drivers to energy management practices in paper and pulp industry are presented. • Barriers to energy efficiency measures by technology area are discussed. • Barriers to consult energy service companies (ESCOs) are presented. [ABSTRACT FROM AUTHOR]

• The 2,4-dichlorophenoxyacetic acid is effectively removed by electrocatalytic oxidation. • By activating the lattice oxygen in Ni/WO 2 , a large amount of O 2 − is produced. • The electrocatalytic oxidation of 2,4-dichlorophenoxyacetic acid by Ni/WO 2 is the best at 8 mA cm-2. • The catalyst is simple to manufacture and has a low cost. Electrocatalysis is a promising method for removing harmful substances because it does not involve toxic agents and has low energy consumption. Herein, we have developed a low-cost nickel-tungsten dioxide (Ni/WO 2) grown on carbon paper for the first time. Ni/WO 2 /CP demonstrates remarkable catalytic efficiency for the electrocatalytic oxidation of 2,4-dichlorophenoxyacetic acid (2,4-D), achieving a conversion rate of 100 % within 3 h and a total organic carbon (TOC) removal rate of 57 %. After four reaction cycles, the electrode can still achieve a conversion rate of 90.49 %. The exceptional activity of Ni/WO 2 could be attributed to the activation of lattice oxygen in WO 2 by coupled Ni, leading to the generation of a significant amount of superoxide free radicals (O 2 −) and creating numerous oxygen vacancies that serve as the active sites for subsequent 2,4-D oxidation. This work highlights the impact of lattice oxygen on electrocatalytic oxidation and material modification, offering a noble metal-free catalyst for converting harmful substances. [ABSTRACT FROM AUTHOR]

Research has revealed the existence of an energy-efficiency gap – the difference between optimal and actual energy end-use, suggesting that energy efficiency can be improved. Energy management (EnM) is a means for improving industrial energy efficiency. However, due to various barriers, the full potential of EnM is not realised. Several studies have addressed drivers and barriers to energy efficiency but few to EnM. This study aims to identify EnM practices, the most important perceived drivers and barriers for EnM, and relations among them in the energy-intensive Swedish pulp and paper industry (PPI), which has the longest experience internationally of practising EnM systems, and has worked according to the standards since 2004. Our results show that, altogether, the PPI works regularly and continuously with EnM, with a clear division of responsibilities. The highest maturity for EnM practices was for energy policy, followed by organization, investments, and performance measurement. The study also shows that communication between middle management and operations personnel has potential for improvement. The most important categories of drivers were economic, whereas for barriers they were organizational. Nevertheless, knowledge-related barriers and drivers were amongst the most important, suggesting that the absorptive capacity for energy issues could be improved. Image 1029 • Energy is managed continuously, with clear policies and responsibilities. • The main drivers are economical while main barriers are organizational. • Knowledge related barriers and drivers are amongst the next most important. • Employees' absorptive capacity for energy issues could be improved. • Link between energy policy and performance measurement could be improved. [ABSTRACT FROM AUTHOR]

Guiding industries to produce in an effective and environmentally sustainable manner has become a key issue for governments around the world. Over the past 15 years, series of regional and industrial development policies have been introduced by the Chinese government. This has influenced the geographical distribution and energy efficiency performance of China’s industries. This paper quantifies the influence of enterprises geographical distribution on energy efficiency improvement in the paper industry and aims at providing some helpful suggestions on industrial development to policy makers. The main results show that, firstly, the paper industry in eastern China shows obvious characteristic of agglomeration. The average location quotient is 1.2278. However, following the industrial and regional development policies, the characteristic of agglomeration is weakening. Secondly, only when agglomeration reaches a certain level (location quotient is above 0.5447) will industrial agglomeration positively impact on industrial energy efficiency improvement (a 1% increase in agglomeration will increase dynamic energy efficiency by at least 0.23%). Thirdly, the regional development policies carried out by the government slow the pace of energy efficiency improvement in China’s paper industry. The empirical results indicate that the government needs to consider regional characteristics and consciously guide industrial enterprises to concentrate in the dominant area. [ABSTRACT FROM AUTHOR]

Abstract Papermaking enterprises are currently under both environmental pressure and economic pressure for sustainable development in China. Thus, the efficiency, effectiveness, and benefits of resource utilization need to be improved. High-consumption and high-pollution companies should manufacture paper using sustainable methods. This study highlights a resource value flow analysis from the circular economy perspective, developing an extension of material flow cost accounting and modifying it by accounting for environmental damage as well as economic benefits. With reference to the Plan-Do-Check-Act cycle, this specific case study was conducted to verify the comprehensive utility of resource value flow analysis by establishing decision-making prioritization according to the dualistic diagnosis of "internal resource loss–external environmental damage costs." In general, applying a resource value flow analysis can both reduce resource consumption and minimize environmental damage, enhancing the sustainable development of a process industry with limited resources. Highlights • Material flows and value flows form an interactive unit in the resource value flow analysis model. • The resource value flow analysis model extends the environmental dimension of material flow cost accounting. • A dualistic diagnosis of "internal resource loss and external environmental damage costs" can achieve both economic profits and environmental benefits. • The Plan-Do-Check-Act cycle was introduced to strengthen the practical application of the resource value flow analysis. [ABSTRACT FROM AUTHOR]

The current challenge facing the European pulp and paper industry is how to materialize the transformation to a bio-economy, as well as to realize the necessary new green innovations. The risks, costs and constraints of doing business will increase, thereby further intensifying competition, but at the same time new business opportunities will open up. This study adopts a three-round dissensus-based Delphi approach in order to explore our key research question of how the pulp and paper industry may change strategically, and what is the potential for value creation in the year 2030. According to our expert panel, the main drivers of competitiveness in 2030 will include energy and material efficiency, sustainability, as well as new innovations in products to serve customer needs better. According to the projected 2030 scenario, the pulp and paper industry will produce more diversified products, focus on higher value-added, and aim at consumer segments with higher environmental awareness. On average, 40 percent of the turnover will according to the panel come from genuinely new products. Strategic cross-sectorial partnerships will have a key role in making this big leap, while simultaneously acknowledging the changing needs of sustainability-conscious customers and other stakeholders. [ABSTRACT FROM AUTHOR]

China is the top emitter of greenhouse gases in the world. Pulp and paper industry is one of eight the strictly regulated industries about carbon emission in China. However, estimates of carbon emissions from China's pulp and paper industry have been suffered from remarkable uncertainty. It is summarized that is aroused by the inaccuracy of factors evaluating energy consumption, and the huge gap between the calculation standards for assessing energy consumption in the production process and the actual level recorded in the factories. This paper re-evaluated the carbon emission of China's pulp and paper industry from the perspective of life cycle assessment, and applied more accurate emission factors, taking account of the actual energy consumption of the production process in factories, to estimate the actual carbon emissions in maximum. It is found that the national standards about the energy consumption quota of China's pulp and paper industry is no longer applicable, and the actual energy consumption regulated in the production process is far better than the advanced level given by the national standards. The greenhouse gas emission have been seriously overestimated approximately 12.00%–56.17% by international organizations. • Life Cycle Analysis of the China's pulp and paper Industry is conducted thoroughly. • The pulp flow of China's pulp and paper Industry is analyzed. • Energy regulated in factory is far better than the national standards' required. • Carbon emissions of China's pulp and paper Industry are overestimated. [ABSTRACT FROM AUTHOR]

With the surging energy price and environmental concerns, measures to improve energy efficiency have attracted increasing concerns of the manufacture sector, especially energy-intensive manufacturing industries such as tissue paper mills. Energy-efficiency scheduling, as a novel energy-efficient method, has attracted the attention of an increasing number of researchers in recent years. Drying process is the most energy-intensive production process in tissue paper mills, which has a great energy-saving potential. This paper aims to reduce the energy costs for the tissue paper mill, consisting of processing energy cost and set-up energy cost, through integrating drying process optimization with energy-efficient scheduling. First, the energy cost model and the scheduling model were built. Then, the energy cost of the drying process of every job in a given scheduling problem was optimized using particle swarm optimization (PSO). Afterwards, the energy cost was further optimized using energy-efficiency scheduling. In addition, a hybrid non-dominated sorting genetic algorithm II (NSGA-II) was utilized to solve the energy-efficiency scheduling problem. Finally, several real scheduling problems from a real tissue paper mill were addressed using the proposed approach to demonstrate its effectiveness in energy saving. The experiment result showed that there is a great energy-saving potential in the drying process, accounting for up to 12.53% of the total energy consumption. Moreover, the maximum energy saving ratio of the proposed approach could reach 9.03%. On the whole, the proposed approach can provide a new energy-saving method for tissue paper mills or other manufacturing industries. [ABSTRACT FROM AUTHOR]

In recent years, the pulp and paper industry has changed a lot and products have been constructed in quite different methods using new technologies. It can be due to the emergence of challenges and constraints such as shortage of raw materials, energy consumption (fossil fuels, electric, etc.), management of the resulting pollutants, environmental issues, ongoing legal requirements and cleaner production strategies. In Iran, the pulp and paper industry's technological development is not keeping pace with global growth. Iran's pulp and paper mills supply a small fraction of domestic market. The reasons can be due to old technologies being used in factories, aging machinery, low productivity of production systems and lack of coordination with modern technologies. It leads to low-quality of paper products and willingness to buy local products. The aim of this study is to select the most appropriate technologies in the pulp section, due to high impact of pulp quality on the quality of final paper. Using a 2-filterd fuzzy decision-making, hierarchical structure of research is designed to assess technological alternatives according to the selected criteria. Findings show that after passing through two filters, Kraft method was chosen as the most appropriate method. The Kraft process has still many advantages like the high quality of the produced pulp and self-sufficiency in energy supply. This framework offers an appropriate procedure for identifying and selecting technologies that has not been used in past researches. Using this framework facilitates using a clear procedure for evaluating and selecting technology and prevents future losses for organizations. [ABSTRACT FROM AUTHOR]

China's paper industry accounts for a larger proportion of the global paper industry and consumes large amounts of energy. Energy conservation and pollution reduction of the industry have become the focus of China's national development strategy. Energy efficiency is an important index which directly determines the amounts of energy consumption and pollution emissions. To understand the energy efficiency evolution of China's paper industry, this paper establishes an input-output data of the paper industry for 29 provinces in China and applies DEA method and econometric models to estimate and comprehensively discuss the energy efficiency issues based on the framework of total factor efficiency. Our results indicate that China's paper industry has a large energy saving potential even though its energy efficiency has improved during the period 1990–2013. The saving potential is about 65% under the meta-frontier and 44% under the group-frontier. Moreover, there are significant differences between different regions in production technology and energy efficiency. The performance of eastern China is better than other regions. But the technology gaps between the different regions are shrinking and converging over time. Finally, some policy recommendations are proposed to improve the energy efficiency of the industry. [ABSTRACT FROM AUTHOR]

China’s paper industry consumes a lot of energy and emits huge amounts of pollutions. The Chinese government over the past decades has done a lot to promote energy efficiency of the industry. This paper studies the impact of industrial polices to improve energy efficiency. The energy efficiency change is firstly studied under a framework of total factor efficiency. On this basis, different econometric models are built to discuss the detailed energy efficiency characteristics of the paper industry. The main results are as follow: (i) ownership structure did influence the energy efficiency, but the influence is different in different conditions; (ii) energy efficiency of the paper industry can be improved by economies of scale; (iii) market competition can to some extent overcome the motivation and supervision problem that often occur in state-owned companies; (iv) energy price cannot play the role of resource allocation well in China. Finally, based on our findings, some suggestions are provided. [ABSTRACT FROM AUTHOR]

The increasing use of recycled paper by the paper industry to support the Green Industry in the Indonesian Pulp and Paper Industry. But technically, there are some disadvantages of recycled fiber usage such as low drainage rate in which boosted the high energy consumption on drying process. As already known, the drying process consumes the highest energy in papermaking. To overcome this problem, the research using the concentrate of endoglucanase Egl-II has done. The steps of research included production of endoglucanase Egl-II; concentration by ultrafiltration method, modification of recycled paper fibers using endoglucanase Egl-II; characterization of paper sheet; and evaluation of energy consumption in drying the sheet of paper. The results showed that endoglucanase Egl-II had increase drainage rate of recycled fiber stock, which indicate by the freeness number. The number had increased by 80 ml CSF (Canadian Standard Freeness) from 190 ml CSF to 270 ml CSF, and fiber retention increased by 0,63% from 99,31% to 99,94%. The dissolved cellobiose test results of recycled fiber stock by the enzyme treatment at low dosage showed that no degradation of cellulose, no change into soluble sugars. Characterization of sheet of paper that has been modified with endoglucanase Egl-II based FTIR spectra showed no change in functional group, SEM results showed on the fiber surface fibrils grow more, and the results of the XRD analysis showed area reduction of amorphous regions is about 6%. The potential for energy efficiency is calculated through thermodynamic approach is about 15%. [ABSTRACT FROM AUTHOR]

The objective of this study was to determine the effect of electrical conductivity, pH and temperature which were kept constant during treatment via an advanced control strategy on chemical oxygen demand, color, turbidity and total suspended solids removal and energy consumption. Central Composite Design matrices were formed for aluminum and iron electrode systems separately with different combinations of 5 independent variables (electrical conductivity, pH, temperature, current intensity and electrolysis time). Obtained results revealed that aluminum electrode system was found to be more effective than iron electrode system under controlled conditions. Comparison of uncontrolled and controlled studies at optimum values of aluminum electrode system showed an increase by 31.67% in chemical oxygen demand removal and a decrease by 48.30% in energy consumption under controlled case. Results indicated that constant electrical conductivity, pH and temperature during electrocoagulation process of pulp and paper mill wastewater by means of a controller enhanced treatment efficiency. [ABSTRACT FROM AUTHOR]

Renewable energy production throughout low-voltage grids has gradually increased in electrical distribution systems, therefore introducing small energy producers - prosumers. This paradigm challenges the traditional unidirectional energy distribution flow to include disperse power production from renewables. To understand how energy usage can be optimized in the dynamic electrical grid, it is important to understand the behavior of prosumers and their impact on the grid's operational procedures. The main focus of this study is to investigate how grid operators can obtain an automatic data-driven system for the low-voltage electrical grid management, by analyzing the available grid topology and time-series consumption data from a real-life test area. The aim is to argue for how different consumer profiles, clustering and prediction methods contribute to the grid-related operations. Ultimately, this work is intended for future research directions that can contribute to improving the trade-off between systematic and scalable data models and software computational challenges. [ABSTRACT FROM AUTHOR]

China has become the world largest paper and paperboard producer. However, pulp and paper industry has involved high resource consumption and severe pollution especially for water. This research has assessed the eco-efficiency of China's pulp and paper industry at the national level and provincial level. An overview regarding the cleaner production of China's pulp and paper industry was presented to reveal the measures for reducing environmental impact in the last two decades. Slacks-based measure was used to analyze the efficiency levels of 16 provinces' pulp and paper industries. To uncover the underlying causes of eco-efficiency performance, Malmquist–Luenberger index was calculated to discover the drivers of productivity growth of pulp and paper industries. Our results showed that the pollution treatment of China's pulp and paper industry has made progress in terms of water consumption and water pollution, although the absolute amount of pollution discharge is still large. Chemical oxygen demand emissions are still the first critical influencing factor of pulp and paper industry's inefficiency. Furthermore, efficiency progress was the dominating contribution of the industry's productivity growth between 2010 and 2013. The policies for adjusting the industrial structure of pulp and paper industry have resulted in the scale effects through eliminating backward production capacity and accelerating merger and acquisitions. Moreover, the productivity of pulp and paper industry was underestimated when the undesirable outputs were ignored. It indicates that the stricter environmental regulations have positive effects on paper companies to internalize environmental pressures in the production activities through environmental management. In the future, pulp and paper companies should further internalize the cost of pollution treatment through scale effects and technology improvement. [ABSTRACT FROM AUTHOR]

The pulp and paper industry accounts for approximately 5% of total industrial energy consumption and contributes 2% of direct carbon dioxide (CO 2 ) emissions from industries. World paper and paperboard demand and production are increasing significantly, leading to an increase in this sector's energy use and CO 2 emissions. Although current studies identify a wide range of energy-efficiency technologies that have already been commercialized for the pulp and paper industry, information is limited or scattered regarding new energy-efficiency technologies that are not yet fully commercialized. Development of emerging or advanced energy-efficiency technologies and their deployment in the market will be crucial for this industry's mid- and long-term energy saving and climate change mitigation strategies. This paper compiles available information on energy savings, environmental and other benefits, costs, and commercialization status for 25 emerging technologies to reduce the energy use and CO 2 emissions. The purpose is to provide a well-structured comprehensive review on these emerging energy-efficiency technologies for engineers, researchers, investors, policy makers, pulp and/or paper companies, and other interested parties. [ABSTRACT FROM AUTHOR]

Abstract With the advent of the Paris Climate Agreement and China ratifying it recently, there is a need to adopt a diversified approach to address climate change; this is especially the case of promoting residential energy conservation. This study is one of the first household energy intervention studies that focuses on the comparison of two message delivering means, paper-based versus instant messaging tool, as a platform for sharing energy-saving tips and engaging households to save energy in China. Conducted in several communities in Hangzhou, Zhejiang Province of China, the effectiveness of using a widely used application known as WeChat in promoting household energy conservation is compared with that of using stickers. It was found that WeChat is the most effective is reducing monthly consumption, but the effects are short-lived. Comparatively, using stickers as a mean of engaging households produces more sustained results in terms of energy savings. This study also provides evidence to correlate the changes in energy consumption behavior with personal perception of one's responsibility and quality of life. That is, certain behavior can be triggered if residents are willing to impose energy ration in their households or are given more opportunities in the form of local programs that enable them to have more practices in energy conservation. [ABSTRACT FROM AUTHOR]

Pulp and paper mill effluent (PPME), a rich cellulosic material, was found to have great potential for biohydrogen production through a photofermentation process. However, pretreatments were needed for degrading the complex structure of PPME before biohydrogen production. The aim of this study was to gain further insight into the effect of an ultrasonication process on PPME as a pretreatment method and on photofermentative biohydrogen production using Rhodobacter sphaeroides NCIMB. The ultrasonication amplitudes and times were varied between 30–90% and 15–60 min, respectively, and no dilution or nutrient supplementation was introduced during the biohydrogen production process. A higher biohydrogen yield, rate, light efficiency and COD removal efficiency were attained in conditions using ultrasonicated PPME. Among these different pretreatment conditions, PPME with ultrasonication pretreatment employing an amplitude of 60% and time of 45 min (A60:T45) gave the highest yield and rate of 5.77 mL H 2 /mL medium and 0.077 mL H 2 /mL h, respectively, while the raw PPME without ultrasonication showed a significantly lower yield and rate of 1.10 mL H 2 /mL medium and 0.015 mL H 2 /mL h, respectively. The results of this study demonstrated the potential of using ultrasonication as a pretreatment for PPME because the yield and rate of biohydrogen production were highly enhanced compared to the raw PPME. Economic analysis was also performed in this study, and in comparison with raw PPME, the highest net saving was $0.2132 for A60:T45. [ABSTRACT FROM AUTHOR]

The Swedish pulp and paper industry (PPI) must increase energy efficiency to remain competitive on the global market, which has experienced entries from countries with cheaper energy and raw material supplies. Interactions among variables for energy use, production, energy management, electricity price and firm characteristics (FC), in different types of mills, i.e., pulp, paper and integrated mills, in Sweden from 2006 to 2015 indicate that correlations among the studied variables were different in different types of mills. This difference between types of mills seemed to originate partly from varying accessibility to production residue that could be used for energy. For all types of mills, variation of electricity prices did not correlate significantly with energy efficiency during the study period. The studied FC were firm's age, number of employees, number of companies in company group, net sales and profit for the year. Energy efficiency was more affected by the variables characterizing energy and production compared to the variables representing FC. This study also suggested presence of possible discrepancies between FC that were perceived as barriers to energy management towards energy efficiency, according to previous studies, and what was shown by the data combining variables representing energy use, production and FC. [ABSTRACT FROM AUTHOR]

The pulp and paper industry is a high energy consuming and polluting sector, and carbon emissions emitted from this sector are worthy of attention. This article, based upon an analysis of China’s Pulp and Paper Industry (CPPI), provides estimates of each of the following: carbon emissions from energy consumption, pre-treatment sector, combustion of condensed black liquor, and methane emitted from incomplete aerobic digestion during sewage treatment of CPPI. During the study period (2005–2012), total CO 2 emissions ranged from 126.0 Mt to 155.4 Mt. Energy consumption was estimated to be the largest source of carbon emissions, however, due to the application of the local emission inventory rather than the IPCC inventory, energy consumption decreased by 4.7%, a lower percentage than was calculated in a previous study. According to this study’s estimation, the emissions caused by the recovery of biomass energy contributed 26–29% of the total CO 2 emissions. CH 4 generated from sewage treatment accounted for 9–11% of the total carbon emissions. The CO 2 intensity dropped during the study period, which reflected the improvement of energy efficiency in the pulp and paper industry. The outcome of this study provides not only detailed information about CPPI’s carbon emissions, but also a calculation framework for studying carbon emissions from pulp and paper sector in the other regions. It suggests that the local carbon emissions inventory should be used for estimating carbon emissions and to reduce the fossil fuel energy, increase energy recovery from biomass, and that promoting cleaner production is essential to achieve a low carbon development of the pulp and paper industry. [ABSTRACT FROM AUTHOR]

[Display omitted] • Ultrafine marble dust waste particles were obtained using the top–down approach. • Waste and by-products had positive effect on dry grinding of stone wastes. • It is economically feasible, also environmentally friendly. • These obtained ultrafine particles can be used effectively mineral filler in many areas. Waste management in marble processing plants is a considerable problem in countries with developed stone industries and trade. Research on the utilization of stone waste in different fields is still continuing. However, there are few studies on using this stone waste from processing plants as mineral fillers. Moreover, no study in the literature has investigated the influence of grinding aids on stone properties. The current research is the first to compare of the efficiency of different grinding aids on the waste calcitic and dolomitic marble in the production of mineral fillers. The objective of this work is to research the impacts of waste and by-products on the dry grinding of stone wastes as grinding aids in a vertical stirred media mill. The results were assessed in terms of various parameters: product particle size, powder flowability, material coating on the grinding media, and energy consumption. Remarkably, the study showed that the use of any of the grinding aids tested enhanced the grinding process in comparison with the no-aid condition. The best product fineness value was achieved with pomace oil followed by the by-product glycerin, among the grinding aids tested in both samples. Moreover, a higher media coating reduction and the highest energy saving were achieved with pomace oil. The most significant and lowest increase in the fluidity index was achieved with pomace oil and paper wastewater, respectively. Additionally, the Fourier transform infrared spectroscopy (FTIR) performed to reveal the interaction between particle surfaces and grinding aids demonstrated the activity of pomace oil and glycerin polar functional groups on particle surfaces. The analysis of the agglomeration phenomenon with SEM (scanning electron microscopy) micrographs showed that particle agglomeration could be eliminated with the pomace oil. Thermogravimetric analysis (TGA) was used to investigate changes in the mass of the samples' due to temperature changes. With this study, a significant contribution will be made to the ecosystem using waste marble powder whose storage problematic. [ABSTRACT FROM AUTHOR]

[Display omitted] • The effluent of the pulp & paper industry was treated by forward osmosis process. • Specific energy consumption (SEC) was lowest for fertilizer-based draw solution. • Low value of SEC obtained as 0.17 kWh/m3 in FO process using urea as draw solute. • Lower solute flux was observed for FO runs compared to RO and NF under same feed. • At higher draw solution concentration dradual increase of resistance was minimum. Wastewater treatment via suitable routes is necessary to protect the environment and fill the shortage of freshwater. An osmotic pressure-driven membrane separation process of forward Osmosis (FO) has gained attention as an alternative water treatment process over the conventional approaches. FO process needs a draw solution (DS). A commonly used fertilizer such as urea in water can be used as a DS, and after the FO run, diluted DS may use as fertilizer. Thus, it can simultaneously generate freshwater for agricultural purposes from industrial wastewater. FO process using thin-film composite flat sheet membrane has been investigated for various lab-made solutions and pulp & paper industrial effluent as feed solutions (FSs) under varying DSs of 0.25, 0.5, 1, and 2 M urea solutions. Limited FO studies examined the long-term and repetitive runs using the same membrane to access the fouling, water, and solute flux behavior with real industrial wastewater as feed solutions (FS). The long-term experimental results prove the strong influences of DS concentration on specific energy consumption (SEC), fouling behavior, and water flux. Increasing the cross-flow rate from 0.33 to 1 L/min has a minor effect on water flux, but SEC increases significantly from 0.17 ± 0.01 kWh/m3 to 0.50 ± 0.03 kWh/m3. FO runs show that the overall water flux enhances due to higher osmotic pressure difference and lesser membrane fouling at higher DS concentration using pulp & paper industrial secondary effluent as FS. This study demonstrates that a low-energy FO process can recover water from industrial wastewater while simultaneously produces a diluted fertilizer for fertigation. [ABSTRACT FROM AUTHOR]

Security token offerings (STOs), based on blockchain technology, are attracting increasing attention as an innovative alternative means of venture financing. Information about specific STOs is generally provided in white papers. This study analyses the content of white papers using a unique sample of 188 STOs from 2017 to 2021 to identify which topic is related to campaign success. We leverage latent Dirichlet allocation (LDA) topic modelling to identify the topics and themes in white papers. Nine topics are identified through LDA: company description, distributed ledger technology components, energy and green issues, financial and legal issues, artificial intelligence, and tech applications in different industries—specifically, healthcare, manufacturing and construction, education, and financial services. We find that energy and green issues represent one of the most prominent topics among all types of projects and that their disclosure is positively related to the probability of campaign success and the amount of funding raised. Another prominent topic that affects campaign outcomes is technology in the healthcare industry, reflecting wider investment trends in this sector. Our results may help entrepreneurs to improve their campaign disclosures and present new issues for policymakers regarding investments in digital tokens. • An integrated framework of STOs success is proposed by combining topic modelling with other campaigns' indicators. • Company's energy consumption and green impact is one of the most dealt topics among all types of projects. • The technological components in the healthcare field is a topic related to the campaign success • Energy consumption and green issues must be adequately disclosed to affect campaign success. [ABSTRACT FROM AUTHOR]

The pulp and paper industry faces several challenges linked to climate and environmental impact, resource efficiency, rising energy prices, increased competition for biomass resources, and declining demand for traditional printed paper products. However, these challenges also offer strategic opportunities for the industry to develop into a competitive, resource-efficient, and low-carbon industry in line with a biobased economy. Against this background, this paper aims to analyse current energy strategies in the pulp and paper industry in Sweden. Specifically, the paper analyses how companies combine continuous process efficiency to reduce energy costs with activities that could be developed into new energy-related products to increase revenue. Most of the analysed companies work to various degrees with both these strategies, employing methods that include improving energy efficiency, energy security, and energy conversion, as well as developing a wide range of biobased energy products. However, our study indicates that there is an untapped potential associated with energy product development, and we conclude that energy efficiency measures can free up resources, enabling the development of new energy products. Finally, several potential managerial outcomes and implications are outlined. • The paper analyses the energy strategies in the pulp and paper industry in Sweden. • Energy strategies focus both to improve energy efficiency and develop new energy-products. • The companies' energy strategies combined exploitation and exploration. • A number of managerial implications are presented. [ABSTRACT FROM AUTHOR]

Small area femtocell increases the energy efficiency of the cellular network as the distance between base station and user is very less. Mobile femtocell causes the spectrum reuse to be used at very large extent making spectral efficiency suffer. This paper discusses recently researched techniques that have been used to increase the spectral efficiency in mobile femtocell network. But these techniques also come with their own limitations. Considering this, data aggregation and compression technique can be consider as one of the best contender to increase the spectral efficiency in cellular network which is also been explained in this paper. [ABSTRACT FROM AUTHOR]

Cogeneration is considered as one of the promising energy efficient techniques for producing electricity and useful thermal energy from a single fuel source. This paper describes a feasibility study of the implementation of different cogeneration options to a paper mill to evaluate their energy saving potentials and economic benefits. The investigated systems in this paper are gas turbine, steam turbine and combined cycle cogeneration options evaluated and compared based on energy utilisation factor and Annualised Life Cycle Cost (ALCC) analysis. The results of energy analysis show that all Combined Heat and Power (CHP) systems satisfy the thermal energy needs of the mill while the combined cycle cogeneration option generates the highest amount of electric energy equal to 10.91 MW. The gas turbine cogeneration system is shown as the most advantageous system from overall energy point of view with the highest energy utilisation factor of 78% meeting the heat and electric requirements of the mill and exporting 21,329 MWh of additional electricity to the grid. Economic feasibility results also show that an overall saving of 5.12 million US$ can be achieved by implementing the gas turbine cogeneration system to the mill making it as the best cogeneration option with the least overall ALCC of 1.34 million US$ and the maximum percentage of CO 2 emission reduction (68%) when compared with the other options. [ABSTRACT FROM AUTHOR]

[Display omitted] • Various carbon nanotube-based devices are developed for solar energy utilization. • The water evaporation system can generate freshwater (1.28 kg m−2h−1). • The solar-thermoelectric system can output a voltage and charge a cellphone. • The supercapacitor performs an areal specific capacitance of 19.6 mF cm−2. • The hybrid energy system can produce freshwater, generate and store electric power. Nowadays, multi-functional systems driven by solar energy have been explored to alleviate the crisis of energy and freshwater scarcity. However, it remains a great challenge to integrate multi-functions into one hybrid system with a monolithic material, which can harvest, convert and store solar energy synergistically. Here, we firstly propose a multi-functional carbon nanotube paper, which starts from a material level to solve these problems. The carbon nanotube paper is fabricated by vacuum filtration. It exhibits high efficiency of solar-thermal conversion. Secondly, three types of energy conversion/storage systems (e.g., solar-thermal evaporation system, solar-thermoelectric generation system, and supercapacitor) are constructed based on the carbon nanotube paper, which extend the research to a device level. The solar-thermal evaporation system shows an evaporation rate of 1.28 kg m-2h−1 under simulated sunlight irradiation of 1 kW m−2. The solar-thermoelectric generation system demonstrates a stable electric power generation with an output voltage of 100 mV under light irradiation of 1 kW m−2. The supercapacitors perform the energy storage function with an areal specific capacitance of 19.6 mF cm−2. These devices and systems can be used in freshwater generation (0.84 kg m-2h−1, sunlight irradiation of 1 kW m−2), water purification/desalination (inorganic ions rejection larger than 99.9%) and portable solar charging system (maximum output voltage of 5 V). Finally, a hybrid energy system is innovatively proposed from the system level to simultaneously produce freshwater, generate and store electric power. Through the synergetic coupling of solar conversion and storage technologies, the hybrid energy system can supply sustainable freshwater and electricity for remote areas in daily life, highlighting the superiority of multi-energy (thermal energy, electrical energy, and electrochemical energy) complementary. [ABSTRACT FROM AUTHOR]

Deploying renewable energy to unit design energy-efficient technologies may fulfill the additional demand of various energy-intensive industries for their sustainability and resiliency. Multiple Stage Evaporator (MSE) is one of the most energy-intensive units used to extract the water content of the weak liquor in various industries, including the paper industry. This energy intensiveness may be reduced by integrating various Energy Reduction Schemes (ERSs). Hence, this work proposes a ERSs integrated MSE model to analyze its energy efficiency. These ERSs includes Thermo-Vapor Compressor, Steam-, Feed- Split, Feed Preheater, and Flash Tanks. Further, the performance of the proposed model is investigated under two important real-time plant complexities: Boiling Point Elevation and Fouling to achieve more realistic results. The performance analysis is initiated with the formulation of a nonlinear constrained optimization problem to increase the steam economy (SE). Also, the simulation is extended to validate at two different product concentrations (52% and 65%) by employing state-of-art optimization algorithms: CONOPT, and SCA in GAMS and MATLAB respectively. The simulated results shows an increment 1.64% and 1.37% of SE for both 52% and 65% concentration of weak liquor respectively in case of CONOPT than SCA. Also, the waste heat of the condensate, feed, and product may be further utilized for the heat recovery by incorporating the flash tanks which leads to a countable energy saving. Eventually, integrating the solar fields: PTC and LFR ensures a notable reduction in conventional heat utilization by 85.96% and 92.85%, respectively and hence, enhance the energy efficiency. • Expounded energy modeling of ERSs based MSE with BPE and Fouling. • Implementation of NLP and metaheuristic approaches for performance optimization. • Reutilization of waste heat to maximize the energy efficiency. • Integration of solar fields (PTC and LFR) to reduce conventional fuel utilization. • Prospecting the challenges and direction of energy management optimization. [ABSTRACT FROM AUTHOR]

Abstract The paper drying process has the highest level of energy consumption in the pulp and paper production process. Analysis and optimization of the energy system during the paper drying process is critical for improving the energy efficiency of the entire paper mill. In the existing model for the paper drying process, the solution requires accurate boundary conditions such as the air temperature and humidity of the pocket area and the cylinder surface temperature, which are very difficult to obtain in the papermaking process. This can result in significant deviations between the model solution and the actual production process. This paper focuses on the single-tier dryer cylinder-based paper drying process that has been widely used with high-speed papermaking machines in recent years. A mathematical model is proposed based on real-time data. The verification via industrial production demonstrates that the proposed model is reliable for the paper drying process. Based on the simulation results, two optimization operations have been proposed. The energy consumption decreases from 1.51 t steam/t paper to 1.44 t steam/t paper, 4.6% of the steam and 1.26 × 106 RMB can be saved for a medium-scale paper mill with the annual production capacity of 105 t paper. Highlights • Mathematical model for the single-tier cylinder based paper drying process is proposed. • Both the steam-condensate system and the paper drying process are considered. • The simulation results are verified by the industrial data from a papermaking enterprise. [ABSTRACT FROM AUTHOR]

Pressure sensor, as one of the most common components in the sensing systems, has attracted plenty of attention in recent years with urgent needs. Herein, a highly sensitive flexible pressure sensor based on conducting polymer (CP)-coated paper is developed via an ultra-simple approach of synthesis and fabrication. This paper-based sensor displays an ultra-low detection limit as low as 0.3 Pa level, and outstanding sensitivity (∼2 kPa −1 , P  ≤ 75 Pa), which can rank the top among that of the reported pressure sensors. The advantages based on paper framework such as low cost, portability, and easy disposability further enhance its feasibility. Meanwhile, combining its rapid and precise response at room temperature and the recognized stability of PPy in the ambient environment, the sensor would ensure direct and continuous environment monitoring with low energy consumption. [ABSTRACT FROM AUTHOR]

• Microorganisms beneficial for effluent remediation are accounted. • Systems biology and AI tools for microbial modification are summarized. • Role of advanced oxidation processes in effluent detoxification is emphasized. • A zero waste strategy is proposed using integrated techniques. • Waste utilization and green energy production is revisited. Due to the high demand of paper and related items, pulp and paper industry is flourishing day by day. With increased production, come the hazards associated with the toxic elements present in the effluents. Various microorganisms are currently employed in the remediation of these toxic effluents. In addition, various techniques like ozonation, electrocoagulation, UV treatment, Fenton's reagent, and photo-Fenton based techniques are used in advanced oxidation processes to reduce these toxins from effluents. This review highlights various above mentioned advanced techniques and innovative processes along with the biological remediation of these toxic effluents with the help of some potential microbial consortia or their combinatory effects. Moreover, the present review will also disclose the ideas on utilizing the tools of metabolic engineering, systems biology, and artificial intelligence towards microbial engineering for relatively better bioremediation processes. In the future, these techniques might be helpful in increasing the capability of microbial consortia towards detoxification of effluents to make them environmentally safe. Finally, this review gives well-synchronized approaches to get more insights into these innovative methodologies and techniques and their use for various industrial applications. [ABSTRACT FROM AUTHOR]

• Caustic recovery from green liquor using electrolysis. • Feed concentration, current density, flow rate, cell geometry etc. were optimized. • Current efficiency/energy consumption were evaluated with optimized process conditions. • Results were compared between the synthetic and industrial green liquor. In the chemical recovery section of pulp and paper mills, the cooking liquor (white liquor, mainly caustic, NaOH) is regenerated by addition of fresh lime (CaO) in green liquor solution (rich in sodium carbonate, Na 2 CO 3), where calcium carbonate (CaCO 3) get precipitated leaving NaOH in solution (causticizing process). Subsequently, CaO is regenerated from precipitated CaCO 3 following washing/drying/calcination steps which are highly energy intensive and environmentally unsafe. The current investigation reports conversion of green liquor to caustic solution using electrolysis through a cation exchange membrane (CEM) placed between two electrodes. Process parameters e.g. current density, feed concentration, flow velocity, flow promoter, electrode-membrane spacing, role of gravity flow were systematically investigated to find optimum values. Process optimization was performed with Na 2 CO 3 (highest constituent of green liquor) solution to avoid complexity, which were then extended to complex salt mixtures of green liquors (synthetic/ industrial sample). Performance analysis of any batch was carried out based on moles of NaOH produced and associated current efficiency and energy consumption observed. With 600 A·m−2 current density, 1.93 mol·L−1 of NaOH could be produced in 6 h of electrolysis through a cell of 66 × 10−4 m2 of CEM, where flow rates of both feed and catholyte streams were counter current and fixed at 3.472 × 10−3 m·s−1. [ABSTRACT FROM AUTHOR]

Graphical abstract Highlights • Municipal solid waste paper was used as raw material for cellulose nanofibres (CNFs). • Pulping, washing and flotation were used as pre-treatments before nanofibrillation. • Despite different amounts of impurities in waste fibres, CNFs were obtained. • Properties of waste CNFs were affected by the used pre-treatment. Abstract When aiming for higher resource efficiency, greater utilization of waste streams is needed. In this work, waste paper separated from mixed municipal solid waste (MSW) was studied as a potential starting material for the production of cellulose nanofibres (CNFs). The waste paper was treated using three different techniques, namely pulping, flotation and washing, after which it was subjected to an ultrafine grinding process to produce CNFs. The energy consumption of the nanofibrillation and nanofibre morphology, as well as properties of the prepared nanofibers, were analysed. Despite the varying amounts of impurities in the waste fibres, all samples could be fibrillated into nanoscale fibres. The tensile strengths of the CNF networks ranged from 70 to 100 MPa, while the stiffness was ∼7 GPa; thus, their mechanical strength can be adequate for applications in which high purity is not required. The contact angles of the CNF networks varied depending on the used treatment method: the flotation-treated networks were more hydrophilic (contact angle 52.5°) and the washed networks were more hydrophobic (contact angle 72.6°). [ABSTRACT FROM AUTHOR]

Much research has been focused on maintaining stable humidity conditions in buildings housing heritage collections while reducing energy use. Moisture buffering by collections themselves can have a marked effect on the stabilisation of relative humidity (RH), the key parameter for preservation. Modelling of moisture transport using COMSOL Multiphysics was applied to transform three-dimensional paper and wooden objects into their one-dimensional representations, without changing the moisture uptake and release characteristics. The results were coupled to the modelling of indoor microclimate and energy consumption in collection storage spaces with the use of WUFI ® Plus software. The study revealed the crucial impact of air exchange rate of the building on the stability of indoor RH and the humidification and dehumidification loads required to maintain it. In the adequately air-tight library store, a sizeable paper collection was found to reduce the RH fluctuations from ±9% to ±6% around the yearly average and the energy consumption due to the humidification and dehumidification load by 38% when compared with the empty space, for a high-quality climate control scenario. In turn, a wooden collection, occupying a realistic fraction of a museum store was not large enough to significantly narrow down the RH variations and reduce the energy consumption. [ABSTRACT FROM AUTHOR]

[Display omitted] • Novel method to estimate total technical potential for improving energy efficiency. • Bottom-up sector energy model used to characterize energy demands and opportunities. • Technology-explicit analysis framework used to estimate integrated energy savings. • Application to Canada's pulp & paper sector indicates major savings are possible. • Technical potential to reduce natural gas use by 95% and net electricity by 54% Industrial energy efficiency has long been recognized as a critical tool for energy management and emissions reduction and is increasingly considered to be an energy resource in its own right. However, the complexity of most industrial sectors creates barriers for modellers, companies, and policymakers in understanding and achieving the overall potential for efficiency-driven energy savings. To address this gap, we have developed a novel method that combines disaggregated bottom-up sector energy modelling with analysis of a comprehensive set of technology-explicit energy efficiency measures. This approach overcomes the deficiencies of top-down analyses and better represents the complexities of multi-measure efficiency investments compared to piecewise studies of individual measures. In this study, we demonstrated application of our method to the case of the Canadian pulp and paper sector. Our analysis shows that the sector can reduce its natural gas and electricity use by 95% and 41%, respectively, by adopting economical efficiency measures. This equates to 71 PJ of natural gas and 44 PJ of electricity saved annually and would result in cost savings of $81 per tonne of output sector-wide. Notably, we find that efficiency and fuel switching have the technical potential to reduce natural gas consumption by 98% across the sector. Taken together, the results provide quantitative evidence that energy efficiency is an underestimated resource for cost-effective energy savings in the Canadian pulp and paper sector. Our analysis framework can be applied to any industrial sector in any region to provide insights regarding energy conservation strategies and policy design. [ABSTRACT FROM AUTHOR]

To reduce energy use and achieve a low carbon production in pulp and paper industry (PPI), it is essential to improve energy efficiency in pulp and paper production. In this study, the energy savings from the PPI were estimated based on a techno-economic analysis by EAGER tool for PPI at the factory level. The structure and implement procedure were introduced initially. Two typical pulp and paper mills from China were determined to estimate the impact of selected energy efficiency technologies (EETs) on energy savings as the cases in the base year. One Factory (A) only produced paper products (i.e. corrugated paper and Kraft linerboard) while the other Factory (B) also produced market pulp besides sack paper. In totally 22 selected EETs were applied to assess their saving potential in Factory A, and 29 measures were applied in Factory B. The results show that 2290 TJ and 1179 TJ of final energy could be saved annually in Factory A and B, corresponding to reduction of 29.4% and 13.6% total energy consumption respectively for the case factories. The CO 2 reduction potential was 32.3% for Factory A compared with that of 16.6% in Factory B. It suggests that the pulp and paper mills should encouraged to use this method estimating energy saving potential, and improve their energy efficiency with suggested measures in order to reduce energy consumption and related carbon emissions further in the coming years. • Energy savings of pulp and paper production were estimated at the factory level. • A techno-economic evaluation tool was applied to access the energy savings and carbon emission reductions. • Two typical pulp and paper factories from China were investigated to estimate their energy savings in the base year. • It is useful to assess energy savings and select feasible EETs in achieving energy saving and emission reduction targets. [ABSTRACT FROM AUTHOR]

This study presents a comparative cradle-to-gate life cycle assessment (LCA) of distillers grain (DG) gum, a bio-based paper coating binder, and polyvinyl alcohol (PVA). Non-renewable energy use, greenhouse gas (GHG) emissions, and eutrophication potential were assessed for each binder. Economic, mass, and energy allocation were used to allocate the impacts of DG gum production with co-products (ethanol and livestock feed). DG production non-renewable energy use (269 to 183 MJ) surpassed that associated with PVA production (168 MJ). GHG emissions from DG gum production under mass and energy allocations were 28% and 37% lower than PVA production emissions, respectively. Corn cultivation is responsible for 55% to 78% of the eutrophication impacts of DG gum production under energy and economic allocation, respectively. Changes to natural gas consumption and fertilizer runoff had the largest influence on total energy use, GHG emissions, and eutrophication potential of DG gum production. [ABSTRACT FROM AUTHOR]

Current management of solid waste from pulp and paper activities represents an environmental and economic burden worldwide due to pollution emissions. This study investigates the potential of hydrothermal carbonisation (HTC) treatment as a sustainable alternative for producing cleaner and energy-dense solid fuel from paper mill sludge. The effect of process parameters (temperature, reaction time and solid load) on hydrochar fuel formation from paper sludge was evaluated and, for the first time, the paper sludge-derived hydrochar was optimised to maximise the mass yield and calorific value using response surface methodology (RSM). The physicochemical characteristics, thermal fuel behaviour, energy recycling efficiency and electricity generation potential were assessed by proximate and ultimate analysis, thermogravimetry, bomb calorimeter, scanning electron microscopy and process energy assessment. Results showed that hydrochar fuel formation and properties were mainly influenced by the process temperature and residence time, and governed by dehydration and decarboxylation reactions which reduced the atomic H/C and O/C ratios by 35.5% and 64%, respectively. The produced hydrochars presented low sulphur, nitrogen and ash content with a maximum calorific value (HHV) of 22.9 MJ/kg, equivalent to the HHV of coal for commercial utility in South Africa. The HHV of the hydrochar corresponded to a 49.80% increase over the HHV of the initial feedstock. The optimum operating conditions were 231 ± 1 °C and 1.99 h for a hydrochar yield of 74.4% and calorific value of 18.5 MJ/kg. The energy assessment showed that up to 58.34% of the energy produced by hydrochar fuel combustion may be recycled as heat or power, while the remaining 41.66% of the combustion energy could be utilised to sustain the HTC treatment of paper sludge. The substantial water demand was concluded to be a drawback. Thus, water recirculation and the potential to catalyse the HTC reactions to increase overall process efficiency will constitute a future study to make the process more environmentally friendly for industrial-scale application. [Display omitted] • Dehydration and decarboxylation were predominant. • Optimum energy yield of 18.5 MJ/kg and 74.4% hydrochar was achieved under 231 ± 1 °C and 1.99 h. • Higher HTC reaction severity enhanced the physicochemical properties of the hydrochar. • Hydrochars produced have low nitrogen and sulphur (<1%) content. [ABSTRACT FROM AUTHOR]

Power generation by variable renewable energy (VRE) is expected to expand for decarbonization, although it is difficult to ensure stabilization of the energy demand due to fluctuations in the power output from VRE. To accelerate VRE implementation, wind-powered thermal energy systems (WT th -ES), which can provide dispatchable power using wind–thermal energy converter (WEC th) and thermal energy storage (TES), have been proposed. In this study, we are tackling the installation of VRE, i.e., wind energy, by TES with WEC th compared with wind turbine (WT p) in paper mills to demonstrate the applicability of TES in an industrial sector. Conventional and alternative energy systems in paper mills with TES were mathematically modeled and simulated to analyze the transmittable power output and the greenhouse gas (GHG) emissions by life cycle assessment. With the installation of TES and wind energy, transmittable power could be increased with GHG emissions reduction. However, their excess installation or unbalanced combination resulted in an increase in GHG emissions and a decrease in transmittable power. By comparing the cases, the combination of paper mill, TES, and WEC th could convert thermal energy efficiently and mitigate fossil fuel consumption for multiple production of paper and power from the paper mill. • A wind-thermal energy converter (WEC th) and a wind turbine (WT p) were compared. • Energy flows and GHG emissions of paper mills with TES and wind were simulated. • Paper mills reduced GHG of power generation less than fossil fuel-fired power plants. • Excess TES reduces dispatchable power generation and increases GHG emissions. • Paper mills with WEC th s and TES have the potential to be regional energy suppliers. [ABSTRACT FROM AUTHOR]

A general mathematical model is developed for electrochemical energy conversion in paper-based, capillary-driven, microfluidic flow cells. A two-dimensional version of the model is implemented to simulate a novel flow cell of this kind called PowerPAD. The methodology developed is validated against experimental data for this particular cell under both steady and unsteady modes of operation. It is shown that a 2D model can represent a 3D cell in unsteady flows provided that the Nernst-Planck equation is properly refined. The results are interpreted in terms of transient back-diffusion and crossover of the reactant species which are found to be the key factors controlling the electrochemical performance of this cell. The validated model is used to enhance the power output, runtime, and energy efficiency of this particular cell through altering its flow architecture and microstructure of electrodes and absorbent pad. The refined cell design is shown to roughly triple the power output and runtime of the device. The optimized design also outperforms the original design in terms of energy efficiency. The developed mathematical model, the fundamental understanding, and the proposed cell design may be utilized to develop new devices and concepts for capillary-based electrochemical systems, including biodegradable batteries, fuel cells, and electrolyzers. [Display omitted] • A dynamic mathematical model is developed for paper-based microfluidic flow cells. • A 2D model can represent a 3D cell subject to Nernst-Planck equation refinement. • The model reveals the unique working mechanism of imbibition and back-diffusion. • Crossover is identified as the key limiting factor for cell performance and runtime. • An optimized cell design is proposed with 3x performance improvement. [ABSTRACT FROM AUTHOR]

Papermaking is a water intensive industry. The growth of paper demand will further intensify the need of fresh water resources. Papermaking involves complex processing routes. Previous investigations of water consumption in papermaking industry have focused primarily on key processes and pathways, ignoring the impacts of many intermediate and inter-related processes in paper production cycles and there underestimating the sustainability impacts. Herein, the results of a life cycle analysis of water consumption for papermaking industry in China using an extensive system boundary that includes the water embedded in intermediate processing are presented. The results show the life cycle water consumption and water saving potentials for different papermaking pathways. The advocacy of "forest pulp and paper integration" may have few practical contribution to reducing water consumption due to the low indirect water consumption of raw materials and energy for transportation. [ABSTRACT FROM AUTHOR]

The Internet of Things is evolving in terms of technology and applications. IoT networks are made up of a lot of smart devices having networking capabilities, also known as endpoints. The battery life of these endpoints is often limited, which has an effect on how long IoT applications can run in the real world. The Internet's current state was developed using a variety of technologies. IoT technology relies heavily on WSNs, which enable the fusion of diverse systems, data, and applications. The findings demonstrate that the suggested structural design can successfully lower energy usage and increase the WSN's course of life. We will outline the causes of energy waste in WSNs in this paper, along with various methods for reducing it. [ABSTRACT FROM AUTHOR]

Increasing energy prices and market volatilities force energy intensive industries to implement energy management systems in order to ensure competitiveness. In this paper, we focus on the strategic level of energy management, specifically, on the analysis of the internal and external conditions that form the basis for strategic development. For this, we selected the case of the Austrian paper and pulp industry. We applied a hybrid method by combining an analysis of strengths, weaknesses, opportunities and threats with an analytic hierarchy process which was based on a survey of expert opinion. The results show that cost-related factors predominate. According to our analysis, the four most important factors are all directly linked to energy costs, energy efficiency, and the energy market. Experts pay little attention to environmental issues or to energy market volatilities. Apart from that, the combination of an analysis of strengths, weaknesses, opportunities and threats with an analytic hierarchy process promises to be a valuable tool for strategic energy management. This is especially true for energy intensive companies and/or sectors, since it enables decision makers to take strategic decisions based on a systematic understanding of the main issues. [ABSTRACT FROM AUTHOR]

• A printed Zn-air/Ag hybrid paper battery with switchable working modes is developed. • In Zn-air mode, OCV of 1.5 V and peak power density of 17.8 mW cm−2 are obtained. • In Zn-Ag mode, a high energy efficiency of 95.2% is achieved with 400 stable cycles. • This hybrid battery can switch its working modes smoothly without performance loss. • The battery flexibility is proved to be high in both working modes by bending test. Paper-based battery is a low-cost, lightweight, flexible and environmentally-friendly technology for small-power and flexible electronics, which can be conveniently fabricated by printing. In this work, we propose an innovative paper-based hybrid battery using Zn foil as anode and Ag grid-supported oxygen catalyst as cathode. Benefited from its composite cathode, this hybrid battery can work in both primary Zn-air mode and secondary Zn-Ag mode in different mission profiles. When working as a primary battery, the Zn anode is oxidized and the ambient air is reduced by the oxygen catalyst inside cathode, producing an OCV of 1.5 V and a peak power density of 17.8 mW cm−2. When working as a secondary battery, the Zn anode is reduced and oxidized periodically while the Ag grid inside cathode is oxidized and reduced accordingly. The charge and discharge voltage plateaus are closely around 1.6 V, leading to an excellent energy efficiency of 95.2%. Moreover, this hybrid battery can switch its working modes smoothly without performance loss, and the battery flexibility is proved to be high in both working modes. In summary, this paper-based Zn-air/Ag hybrid battery is especially suitable for powering flexible electronics in both long-term discharge missions and multi-cycle rechargeable tasks. [ABSTRACT FROM AUTHOR]

Daytime subambient radiative cooling is a most promising alternative to electricity-free building cooling. However, optical performance degradation arising from surface contamination and inevitable parasitic heat gain still pose unprecedented challenges to cool building at subambient temperatures. This paper proposed a superhydrophobic cellulose aerogel cooler (SHB-CAC) as building envelope by integrating self-cleaning capacity, passive daytime radiative cooling and thermal insulation to reduce environmental heat gain. The SHB-CAC demonstrates high solar reflectance (93%) and long-wave infrared emittance (91%), accomplishing a temperature drop of 8.5 °C lower than the ambient under sunlight of 800 W/m2 in the outdoor experiment. Notably, the SHB-CAC possesses low thermal conductivity (28 mW/(m∙K)) that suppresses parasitic heat gain from warmer surrounding and reduces cooling energy consumption. The self-cleaning property resulting from superhydrophobicity protects SHB-CAC from water wetting and dust contamination but also maintains its good surface radiation capacities under different humidity environment. A building energy simulation was conducted and results showed that 43.4% of cooling energy on average could be saved compared to the building baseline consumption, if SHB-CAC was widely used in China, indicating that the strategy of optical and thermal conductivity management of cooler has the potential to reduce the energy consumption of buildings. [Display omitted] • Waste paper is converted into aerogel cooler for building cooling. • High R solar and ε IR , thermal insulation, and self-clean are achieved in one design. • The aerogel achieves a high sub-ambient temperature drop of ∼8.5 °C on daytime. • The aerogel shows that 43.4% of cooling energy could be saved. [ABSTRACT FROM AUTHOR]

Under the dual pressure of energy consumption and environmental pollution, mankind hopes to develop clean and renewable alternative energy, and the rapid development of fuel cells meets people's demand for energy-efficient power systems. The emergence of portable micro energy systems represented by microfluidic fuel cells, such as paper-based microfluidic fuel cells, has greatly enriched the means of medical detection to better cope with the threat of disease transmission. In this work, the numerical simulation method is innovatively introduced to study the paper-based microfluidic fuel cells. Both transient and steady-state modes are employed to demonstrate the whole operation process of the paper-based microfluidic fuel cell. In addition, the different structural parameters, including electrode spacing, the distance between electrode and inlet, channel thickness, and electrode length, are also investigated their influence mechanisms on cell performance. Results show that the increase of most structural parameters decreases cell output power in different degrees. Even on the premise that increasing channel thickness has a positive impact on the output power, the fuel utilization still shows a downward trend. These conclusions provide theoretical support and reference for future optimization work and accelerate the development of microfluidic fuel cells. • Numerical simulation is employed to study paper-based microfluidic fuel cell. • The effects of structure parameters on cell performance are discussed. • Through fuel concentration distribution to reveal cell performance mechanism. • Fuel utilization is used to evaluate energy efficiency. [ABSTRACT FROM AUTHOR]

Nanomaterials may have a key role since they can be applied in several vehicle components (such as H 2 storage, vehicle structure, batteries), but there is the concern that some nanomaterials may lead to relevant environmental impacts. This paper addresses a revision of the environmental impacts of different types of nanomaterials applied to alternative vehicles in order to reduce energy use (and consequently the global greenhouse gases emissions). A literature review is performed in order to analyze the recent improvements in nanomaterials applied to alternative vehicles. This revision will be based on life cycle assessment and risk analysis. [ABSTRACT FROM AUTHOR]

• Advancements in sludge processing to reduce particle and acidification emissions. • Reduced environmental footprint through innovative sludge treatment. • Sludge hydrochar carbon stabilization contributes to climate change mitigation. Proper management of wastewater treatment plant side streams in pulp and paper mills is a matter of great interest. This study evaluates the environmental impact of different strategies in the management of biosludge from pulp and paper mills in Finland through a Life Cycle Assessment methodology. The base industrial standard practice, biosludge incineration for energy recovery and ash landfill disposal (Scenario 1), was compared to the alternative process of hydrothermal carbonization. The hydrochar generated from hydrothermal carbonization was evaluated for energy recovery through incineration (Scenario 2), or for use in composting for nutrient recovery (Scenario 3). The results showed that the hydrothermal process improved the overall environmental performance of the sludge management, particularly in terms of energy consumption and greenhouse gas emissions. The use of hydrochar as a soil amendment in composting also resulted in a significant reduction on the environmental impact compared to the other two scenarios. Overall, this study highlights the potential of hydrothermal carbonization and hydrochar utilization as sustainable options for managing biosludge from pulp mills. [ABSTRACT FROM AUTHOR]

Hydraulic drive is one of the main driving methods of traditional bionic fish, which has the disadvantages of high driving pressure and significant radial expansion of the fishtail. In this research, two innovative structures are introduced in the fishtail design to overcome these drawbacks. Firstly, high-flexible origami technology is applied to the fishtail, significantly reducing the unwanted radial expansion of the fishtail and improving energy efficiency. Based on the experiments, the origami-structured fishtail can save up to 92.3% energy compared with the traditional fishtail. Secondly, according to the bionic principles, the hybrid neutral layer of the fishtail which is sandwich-structured with knitting methods was designed. The test results show that this novel hybrid neutral layer could save up to 56.7% energy compared to the fishtail with a rigid neutral layer. A bionic fish in BCF model (Body and/or Caudal Fin propulsion) is fabricated and tested in a water tank. The results prove that the new bionic fish with the innovative fishtail obtain a good straight-line swimming direction and turning ability. This study could provide an important reference for the bionic design to mimic real fish. • A new type of fishtail is designed with an origami-style driven structure and a neutral layer that mimics a real fish's bone. • The structure of the elastic fluid driver adopts the folding paper structure to expand and contract efficiently. • Inspired by traditional Chinese knot structure, the neutral layer of the original rigid body structure was scattered first and then connected by knot structure to form a whole structure. • The novel fishtail shows excellent energy efficiency in experiments. [ABSTRACT FROM AUTHOR]