Search

International audience; Purpose: This quality improvement project evaluated interventions implemented to enhance individual adherence to a lung-protective ventilation strategy and its triad: low tidal volume, PEEP ≥ 5, recruitment manoeuvres.Methods For two years, nine anaesthesia workstations were connected to an automated cloud-based analytics software tool, which automatically recorded ventilation parameters as soon as a new patient case was opened. Four quality improvement periods were determined over the first year: baseline, intervention, no intervention, intervention + digital. In the second year, the digital strategy was continued for nine months, followed by a final “overtime” period. Baseline and no intervention periods included no training. The intervention period included both conventional and educational programs. The digital period included pop-up messages, which automatically appeared on the screen of the anaesthesia data management system when patients were intubated. The primary endpoint was provider adherence to the recommended triad.Results: From October 2018 to December 2020, 12,883 procedures were performed. Data were available for 8968 procedures: baseline (n = 2361), intervention (n = 2423), no intervention (n = 1064), intervention + digital (n = 1862), overtime (n = 1258). Age, Predicted Body Weight, ASA score, type of surgery and airway management were similar between periods. At baseline, 75.2% of procedures reported low tidal volume but only 6.9% involved the complete triad. At over time, Triad was 22% (p

International audience; A range of thermomorphic polyethylene-supported organocatalysts is prepared from N-alkyl imidazoles and polyethylene iodide (PE) with good yields (85–92%) and high funtionality (98–99%). The catalytic activity of these species is studied for the ring opening of epoxidized methyl oleate with CO2 to give the corresponding cyclic carbonate. The reaction is carried out at 100 °C to fully exploit the thermomorphic behavior of the organocatalysts. The optimized conditions (neat, 100 °C, and 20 bar of CO2) are applied to a range of epoxidized fatty acids, including an epoxidized rapeseed oil, to give the corresponding carbonates with good yields (75–96%). The catalyst recycling is also studied, and no significant loss of activity is observed after ten runs. The fatty carbonates are important intermediates for the preparation of non-isocyanate polyurethanes (NIPUs).

International audience; A SiO 2 /MgCl 2-bisupported Ziegler−Natta-type catalyst is studied in gas-phase ethylene/1-butene copolymerization. With a minimal amount of alkylaluminum required to activate the catalyst, polymerization kinetics is profoundly affected by the dosage of it. High dosage of alkylaluminum retards the polymerization but does not kill the catalyst. Through a comprehensive characterization on the samples by differential scanning calorimetry, crystallization elution fractionation, thermal gradient interaction chromatography, cross-fractiona-tion chromatography, and nuclear magnetic resonance, it has been shown that alkylaluminum also alters the short-chain branching distribution (SCBD) of the copolymer but barely affects the total comonomer incorporation. It is proposed that alkylaluminum alters the active species from producing statistical copolymer chains to producing block polymer chains with C4-enriched and C4-scattered segments. It provides an example of a bimetallic structure of active species as well as an approach to tailor SCBD between a statistical copolymer and block copolymer bearing C4-enriched and C4-scattered segments.

International audience; The reactivity of a phenoxy-imine-ether system (FI)TiCl3/MAO was studied toward selective ethylene trimerization. This system was shown to either trimerize or polymerize ethylene depending on the reaction temperature. Its selectivity switches from a significant production of the trimerization product, 1-hexene (85 wt %, 520-450 kg1-hexene gTi-1 h-1) between 30 and 40 °C, to a moderate polyethylene formation (70-80 wt %, 60-70 kgpolyethylene gTi-1 h-1) at higher reaction temperature (T > 60 °C). Polymerization was investigated based on an original "polymer-to-catalyst" strategy aiming at identifying the active species responsible for this side reaction. Using DSC, SEC and high temperature 13 C NMR analyses, polyethylenes were found to exhibit high molar masses (> 10 5 g mol-1) and a low 1-hexene content (< 1 mol %) at any temperature. Kinetic studies support that trimerization and polymerization species are generated from the catalyst precursor at 40 °C but a parallel process may occur at higher temperature. The increase dispersity to 4.6 at 80 °C suggests a change from single to multisite catalysis. The poor comonomer incorporation ability of the active species is reminiscent of a molecular Ziegler Natta or a bulky postmetallocene catalyst.

International audience; Mid and near infrared (MIR and NIR) spectroscopy associated with the partial least squares (PLS) method makes it possible to rapidly characterize the composition of linear low-density polyethylene (LLDPE) in a large range of 1-hexene content from 0 to 21 mol%. LLDPEs are produced using zirconocene catalysts activated with methylaluminoxane. PLS regression methods for MIR and NIR are constructed from this series of LLDPEs to quantify the 1-hexene content in unknown copolymers. In this case, the PLS regression method aims to correlate the 1-hexene content in the copolymers with their IR spectra. Multivariate calibration models are constructed by the PLS algorithm on pretreated data of MIR and NIR analyses. They are tested and validated by comparing results obtained by NMR and the PLS analyses for four unknown ethylene-1-hexene copolymers.

International audience; Copolymers of ethylene and butadiene were prepared using the ansa-bisfluorenyl Me2Si(C13H8)2NdR complex in combination with dialkylmagnesium as a chain transfer agent. Thorough kinetic studies and computational mechanistic investigations of this copolymerization reaction were performed. Combined with detailed analyses of the polymer microstructure and chain-ends, these studies demonstrate that the entitled copolymerization operates according to a living coordinative chain transfer copol-ymerization of ethylene and butadiene. Besides, in addition to the formation of the previously described 1,2-cyclohexane inner chain cyclic motif, the presence of bicyclic 1,5-decalin units via the formation of transient vinylcyclohexyl-methyl chain-end is discussed in the present communication. The non-accumulation of the vinylcyclohexane motif within the chains is explained by the reversibility of its formation, as interpreted with the help of DFT calculations, or by its rapid conversion into decalin motif after one ethylene insertion. Finally, this study also illustrates the ability of the fluorenyl ligand to adjust its binding mode on demand in order to avoid inhibition of catalyst.

International audience; While the introduction of polymers in aerogels strongly enhances their toughness, truly elastic monolithic aerogels able to restore their dimensions upon extensive compression are still challenging to synthesize. In this context hydrophobic semi-crystalline polymers with low glass transition temperatures that combine both stiffness and flexibility have only recently gained attention. We show that polyethylene aerogels with low density combining chemical crosslinking and high crystallinity display high moduli and excellent mechanical resilience. In order to maximize the crystallinity of these aerogels while maintaining a high crosslinking density, we synthesized polyethylene networks with well-defined segments by hydrosilylation-crosslinking of telechelic, vinyl-functionalized oligomers obtained from recent advances in catalyzed chain growth polymerization. Recoverable deformations both above and below the melting temperature of polyethylene affords remarkable shape-memory properties.

International audience; An innovative method based on thermogravimetric analysis combined with gas chromatography and mass spectrometry, TGA-IST16-GC-MS, was developed for measuring the comonomer type and the comonomer content in a series of linear low-density polyethylene (LLDPE). LLDPE such as copolymers of ethylene and octene or ethylene and hexene were synthetized using the Et(Ind)2ZrCl2 / MAO zirconium-metallocene catalyst. Their characterization with TGA-IST16-GC-MS system were compared to the one of polyethylene prepared under similar conditions and used as reference. TGA-IST16-GC-MS allowed discriminating the comonomer type (hexene or octene) and content. Combining the versatility of thermal analysis and the accuracy and sensitivity of mass spectrometry, this original method proved to be very useful for routine characterization of LLDPE. It has the advantage of being quicker and more easily performed that traditional means of obtaining copolymer compositions such as nuclear magnetic resonance (NMR), or chromatographic methods such as TREF.

International audience

Accurately measuring mol. kinetics of catalytic olefin polymn. has been a challenging objective. Many methods have been proposed in the literature, but all of them have drawback(s)​. In this paper, we introduce a labeling method to count active sites employing Me propargyl ether (MPE) as the quench-​labeling agent. It is com. available, does not react with Al-​alkyl species, and has a labeling efficiency close to 100​%. The labeling reaction was evidenced by a mechanistic study on the reaction between the model system Cp2ZrMe2/MAO (Cp = cyclopentadienyl) and MPE that it may occur through a coordination-​insertion mechanism without noticeable multiple insertions. The method was benchmarked by studying a MgCl2-​supported Ziegler-​Natta catalyst in 1-​hexene polymn. The fraction of the active transition metal χ* is found to be

Thymine (Thy) or 2,6-diamino-1,3,5-triazine (DAT) end-groups were efficiently installed on well-defined polyethylenes (PEs) synthesized by catalyzed chain growth (CCG) polymerization. Mono- and bifunctional low-molar mass PEs (1200–1500 g·mol–1) formed lamellar morphologies with long-range order upon cooling from the melt due to microphase segregation of polar supramolecular units and apolar PE chains. Crystallization of Thy functions into rigid planes at 180 °C induced very long-range lamellar order in Thy-functionalized PEs and dramatically suppressed PE crystallization (from 67% to 19%). DAT-functionalized PEs, whose end-groups do not crystallize, showed slightly reduced PE crystallinity (62%) and less long-range order, since assembly was instead driven by PE crystallization. Mechanical analysis of the bifunctional PEs demonstrated high moduli roughly proportional to PE crystallinity but low strains at break due to the absence of chain entanglements and/or tie chains between crystalline lamellae. This ...

Monofunctional or telechelic polyethylenes (PEs) carrying phosphonic acid end groups are obtained from functional PE produced by catalyzed chain growth (CCG) on magnesium. CCG is first used to produce iodo-end-functionalized PE (PE-I) that is efficiently turned into phosphonate end-functionalized PE (PE-P(O)(OEt)2 ) in the presence of triethylphosphite through the Michaelis-Arbuzov reaction. A simple treatment of the resulting PE-P(O)(OEt)2 with bromotrimethylsilane leads to the targeted phosphonic acid end-functionalized PE (PE-P(O)(OH)2 ) for the first time. Vinyl-end-functionalized analogs (Vin-PE-P(O)(OEt)2 ) are produced using vinyl-end-functionalized PE-I (Vin-PE-I) recently obtained through CCG. A cross-metathesis reaction is then employed to couple Vin-PE-P(O)(OEt)2 and produce after treatment with bromotrimethylsilane the corresponding unprecedented α-ω-(diphosphonic acid) telechelic PE ((OH)2 (O)P-PE-P(O)(OH)2 ).

International audience; Coordinative chain transfer copolymerization of ethylene and styrene was successfully achieved using an ansa-bisfluorenyl neodymium complex, a dialkylmagnesium as a chain transfer agent and di-n-butylether (Bu2O) as a co-solvent. Under these conditions, a controlled chain growth was observed during the polymerization. Chain-end functionalization was performed and it revealed that both styryl and alkyl terminated chains shuttle between neodymium and magnesium. The analysis of the microstructure revealed that up to 3 mol% of styrene can be incorporated into the polymer. A computational mechanistic study at the DFT level was performed to characterize insertion selectivities and it further revealed the role of magnesium species in assisting β-H elimination.

International audience

Di(1-(propyl)-2,2,5,5-tetramethyl-1-aza-2,5-disilacylopentane)magnesium was synthesized and used as chain transfer agent for the ethylene polymerization in the presence of a neodymocene precursor. The polymerization was shown to be governed by a catalyzed chain growth process (CCG) on magnesium, allowing the quantitative formation of ammonium or amine functionalized polyethylene (PE) chains. The structure of these chains was shown by 1H and 13C NMR analyses. MALDI-ToF mass spectrometry was successfully used to confirm the structure predicted by the CCG mechanism. The additional formation of telechelic PE chains carrying an ammonium and either a diethyldithiocarbamate or an iodo moiety as end groups was shown after a simple deactivation of the polymerization medium with disulfiram or molecular iodine, respectively.

The size of a silica supported metallocene/MAO (methylaluminoxane) catalyst plays an important role in determining its productivity during ethylene polymerization. From a chemical engineering point of view, this size dependency of catalytic activity of supported metallocenes is mathematically connected with the different levels of mass-transfer resistance in big and small catalyst particles but no experimental evidence has been provided to date. The results of this systematic experimental study clearly demonstrate that the intraparticle monomer diffusion resistance is high in bigger catalyst particles during initial instants of ethylene polymerization and diminishes with the polymer particle growth. Two different silica supported metallocene/MAO catalysts provided the same results while highlighting the fact that catalyst chemistry should be carefully considered while studying complex chemical engineering problems. © 2017 American Institute of Chemical Engineers AIChE J, 63: 4476–4490, 2017

This work highlights a medium pressure and temperature radical polymerization process in organic solvents for the synthesis of ethylene–vinyl acetate copolymers (EVA). Organic solvents play a crucial role in copolymerization yields, copolymer molar masses, chemical composition, and branching degree. THF and dimethylcarbonate (DMC) were selected, yielding EVA copolymers exhibiting molar masses from 1000 up to 35000 g mol–1 and vinyl acetate contents between 4 and 32 mol %. In the case of DMC, an additional transfer agent (propanal) was required to reach the molar-mass range targeted for the specific application of EVA copolymers as cold flow improver (CFI): an essential diesel fuel additive.

The determination of the xylene soluble fraction in high impact polypropylene is used to estimate the rubber content in the polymer material. In analytical laboratories, the soluble fraction is measured by a solvent extraction using gravimetric methods according to ASTM5492 or ISO6427. These methods require large quantity of polymers, large volume of solvent and long extraction times. It is therefore highly desirable to develop other laboratory methodologies for this task; preferably methodologies that employ existing laboratory equipment. It is found that the SEC method proposed here yields estimates of rubber contents very close to those found using standardized technics but in much shorter times. This article is protected by copyright. All rights reserved

International audience; Ethylene/butadiene copolymerization can be performed by neodymocene catalysts in the presence of an alkylating/chain transfer agent. A variety of polymerization activities and copolymer microstructures can be obtained depending on the neodymocene ligands. For a set of four catalysts, namely (C5Me5)2NdR, [Me2Si(3-Me3SiC5H3)2]NdR, [Me2Si(C5H4)(C13H8)]NdR and [Me2Si(C13H8)2]NdR, we report a DFT mechanistic study of this copolymerization reaction performed in the presence of dialkylmagnesium. Based on the modeling strategy developed for the ethylene homopolymerization catalyzed by (C5Me5)2NdR in the presence of MgR2, our model is able to account for the following: (i) the formation of Nd/Mg heterobimetallic complexes as intermediates, (ii) the overall differential activity of the catalysts, (iii) the copolymerization reactivity indexes, and (iv) the specific microstructure of the resulting copolymers, including branching and cyclization. The analysis of the reaction mechanisms and the energy profiles thus relates ligand structure, catalyst activity, and polymer microstructure and sets the basis for further catalyst developments.

A new class of well-defined activating supports for olefin polymerization was obtained via the surface organometallic chemistry approach. High activities in slurry polymerization of ethylene along with industrial-grade physical properties of the resulting polyethylene were obtained when these activators were combined with metallocene complexes in the presence of triisobutylaluminium.

International audience; Ethylene polymerizations were performed in toluene using the neodymocene complex (C5Me5)2NdCl2Li(OEt2)2 or {(Me2Si(C13H8)2)Nd(μ-BH4)[(μ-BH4)Li(THF)]}2 in combination with n-butyl-n-octylmagnesium used as both alkylating and chain transfer agent. The kinetics were followed for various [Mg]/[Nd] ratios, at different polymerization temperatures, with or without ether as a cosolvent. These systems allowed us to (i) efficiently obtain narrowly distributed and targeted molar masses, (ii) characterize three phases during the course of polymerization, (iii) estimate the propagation activation energy (17 kcal mol–1), (iv) identify the parameters that control chain transfer, and (v) demonstrate enhanced polymerization rates and molar mass distribution control in the presence of ether as cosolvent. This experimental set of data is supported by a computational investigation at the DFT level that rationalizes the chain transfer mechanism and the specific microsolvation effects in the presence of cosolvents at the molecular scale. This joint experimental/computational investigation offers the basis for further catalyst developments in the field of coordinative chain transfer polymerization (CCTP).

We present the design and synthesis of a linear ABC triblock terpolymer for the bottom-up synthesis of anisotropic organic/inorganic hybrid materials: polyethylene-block-poly(2-(4-(tert-butoxycarbonyl)amino)butyl-2-oxazoline)-block-poly(2-iso-propyl-2-oxazoline) (PE-b-PBocAmOx-b-PiPrOx). The synthesis was realized via the covalent linkage of azide-functionalized polyethylene and alkyne functionalized poly(2-alkyl-2-oxazoline) (POx)-based diblock copolymers exploiting copper-catalyzed azide-alkyne cycloaddition (CuAAC) chemistry. After purification of the resulting triblock terpolymer, the middle block was deprotected, resulting in a primary amine in the side chain. In the next step, solution self-assembly into core-shell-corona micelles in aqueous solution was investigated by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Subsequent directional crystallization of the corona-forming block, poly(2-iso-propyl-2-oxazoline), led to the formation of anisotropic superstructures as demonstrated by electron microscopy (SEM and TEM). We present hypotheses concerning the aggregation mechanism as well as first promising results regarding the selective loading of individual domains within such anisotropic nanostructures with metal nanoparticles (Au, Fe3O4).

Well-defined, crystalline, low molar mass polyethylene PEx (where x is the molar mass 1300 and 2200 g mol–1) bearing thymine (Thy) or 2,6-diaminotriazine (DAT) end groups have been synthesized from amino-terminated PE. Either double-layer or monolayer solid-state morphologies were attained depending on the nature of the end-group(s). PE1300-NH2, PE1300-DAT, and the equimolar blend PE1300-Thy/DAT-PE1300 all organized into double-layer structures composed of extended PE chains sandwiched between H-bonding chain-ends. The double-layered morphology arose from the microphase separation of the polar end-groups and the nonpolar PE chains and was frozen by the crystallization of the PE domains. The regularity of the PE lamellar stacking was higher for the stronger and more directional associated pair Thy/DAT compared with samples of either PE-NH2 or PE-DAT. For PE1300-Thy, the mesoscopic organization was driven by the crystallization of Thy domains prior to crystallization of the PE chains, forcing the small prop...

International audience

International audience

Summary 2 laboratory-scale reactor systems suitable for gas phase, and for solution or slurry polymerisations are discussed. The underlying concept behind the design and use of these reactors is that they can be used to understand the impact of conditions specific to different time scales and/or length scales inherent to large reactors that are difficult to recreate at the laboratory scale. For instance the fixed bed gas phase reactor is used to study the influence of different relative gas/solid velocities on the evolution of the molecular weight distribution of the nascent polymer. It is shown that in certain conditions, changing the heat transfer characteristics does not change the observed yield, but will impact the polymer properties. In the case of the solution reactor, the concept is to design and use a reactor to study the activation of unsupported metallocenes. Here it is shown that different metallocenes have very different activation profiles to a point where a stopped flow reactor might not be the ideal tool for their study.

International audience; Polyethylenes and azide-terminated polyethylenes can be converted to macroradicals and nitrenes, respectively followed by addition reactions onto the unsaturated system of graphite oxide sheets. For the first time, the addition of these macroradicals to graphite oxide sheets was compared by performing grafting reactions at 190 degrees C in 1,2,4-trichlorobenzene as a solvent and at 100 degrees C followed by a solvothermal reduction at 150 degrees C in a solvent mixture of 1,4-dioxane and 1,2-dichlorobenzene. Dispersion of PE coated graphite oxide in a DMF-heptane mixture was utilised to follow the introduction of polyethylene onto the GO sheet surface while the thermogravimetric analysis indicated the extent of this grafting. The grafting ratio was found to be in the 1.5 wt% range and despite this low grafting content, the amount of grafted PE was high enough to dramatically improve the affinity of GO with the heptane phase in the DMF-heptane (50/50 v/v) mixture. Polyethylene functionalised GO was imaged by scanning electron microscopy showing a significant difference in morphology between the two grafting paths. It was found that a higher level of grafting was obtained using a radical grafting reaction in the presence of benzoyl peroxide rather than the thermal cleavage of PE-N-3 onto GO while a similar grafting content was obtained with the thermal cleavage of PE-N-3 onto GO grafted trimethoxy(7-octen-1-yl)silane.

Despite the fact that the very early stages (several tens of seconds) of catalysed olefin polymerisation processes appear negligibly short with respect to the residence time of most industrial reactors, they are critical in terms of catalyst activation, obtaining good particle morphology, and avoiding irreparable problems caused by particle overheating. The different types of reactors that have been used over the course of the past few years are discussed in this feature article. It is shown that despite the difficulties encountered in finding the perfect experimental tool for this purpose, different configurations of stopped flow reactors can be used successfully to explore different aspects of what happens to the catalyst (supported and molecular) during these critical moments of polymerisation. © 2012 Canadian Society for Chemical Engineering

International audience; Enhanced spin capturing polymerization (ESCP)-a recent and versatile technique in the field of controlled radical polymerization-achieves control over molecular weights and the synthesis of complex copolymer structures for a wide range of monomers. In the present work, the use of ESCP was extended to the radical polymerization of ethylene under mild conditions (low temperature and medium ethylene pressure) using a nitrone as spin trapping agent. It was demonstrated that the evolution of polyethylene (PE) molecular weight can be accurately described by classical ESCP kinetic equations. A PE bearing a midchain alkoxyamine function was thus obtained with high selectivity (90%). A more complex structure was produced from the radical polymerization of ethylene in the presence of a midchain alkoxyamine-functionalized polystyrene (PS) synthesized by ESCP in the form of ABA triblock copolymer (where A is polystyrene and B polyethylene).

International audience; Thiol end functionalized polyethylenes (PE-SH, Mn around 1000 g mol−1, Đ \textless 1.3) were used as nucleophiles in thia-Michael additions with different acrylic molecules. It was found that under commonly used practical conditions the addition to methacrylates was very difficult, whereas addition to acrylates was very efficient. First, block copolymers based on PE and poly(methyl methacrylate) (PMMA) were targeted by reaction of PE-SH with PMMA obtained by catalytic chain transfer polymerization (CCTP). The reaction however failed and detailed model experiments using butanethiol and a dimer of MMA showed that the solubilization temperature of PE-SH was an impediment to the success of the reaction. The lack of reactivity towards PMMA obtained by CCTP and methacrylate functions was advantageously used to react molecules containing both an acrylate and a methacrylate group in the presence of tributyl phosphine (PBu3) to produce methacrylate-type PE macromonomers. The presence of a hydroxyl function on 3-(acryloyloxy)-2-hydroxypropyl methacrylate induced side trans-esterification reactions catalyzed by PBu3. This was overcome by using the hydroxyl free 2-(acryloyloxy) ethyl methacrylate. With the latter, the desired PE macromonomer exhibited a functionality as high as 85%. Alternatively, 2-isocyanatoethyl methacrylate could also be reacted with PE-SH to produce a highly functionalized methacrylate type PE macromonomer (functionality 89%). Eventually, the efficiency of the thia-Michael addition of PE-SH onto poly(ethylene glycol) acrylate (PEG-acrylate) was used to synthesize the PE-b-PEG block copolymer.

International audience; A poly(glycidyl methacrylate) (PGMA) synthesized by RAFT polymerization was spin-coated onto a silicon substrate to yield, after annealing and rinsing unreacted chains, covalently attached epoxy-containing PGMA pseudo-brushes. A tailor-made ω-amino-poly(ethylene) (Mn = 1040 g mol−1, PDI = 1.3) was then grafted in melt at 130 °C for 24 h by reaction between amine chain-ends and surface-tethered epoxy groups. After discarding unreacted poly(ethylene) chains by sonication and Soxhlet rinsing, the resulting poly(ethylene) brushes were characterized by scanning probe microscopy, water contact angle and neutron reflectivity measurements. The grafting of poly(ethylene) brushes to silicon substrates has thus been demonstrated for the first time and resulted in nanostructured grafted layers with homogeneous surface coverage.

Neutral NiII complexes, classically used for catalytic ethylene polymerization, can play an additional role as radical initiators of the homo- and copolymerizations of (meth)acrylates and styrene. Benefiting from this duality, the copolymerization of ethylene and various (meth)acrylates or styrene was successfully performed. Multiblock copolymers containing sequences of both ethylene and (meth)acrylates were prepared for the first time from an original dual radical/catalytic mechanism.

A route to fully miscible polyethylene (PE) nanocomposites has been established based on polymer-brush-coated nanoparticles. These nanoparticles can be mixed with PE at any ratio, with homogeneous dispersion, and without aggregation. This allowed a first systematic study of the thermomechanical properties of PE nanocomposites without interference from aggregation effects. We observe that the storage modulus in the semicrystalline state and the softening temperature increase significantly with increasing nanoparticle content, whereas the melt viscosity is unaltered by the presence of nanoparticles. We show that the complete miscibility with the semicrystalline polymer matrix and the improvement of thermomechanical properties in the solid state is caused by the PE-coated nanoparticles being nucleating agents for the crystallization of PE. This provides a general route to fully miscibility nanocomposites with semicrystalline polymers.

International audience; Synthesis of highly end-functionalized polyethylene chains was accomplished using both coordination chemistry and radical mediated thiol?ene chemistry. A vinyl end-terminated polyethylene (Mn =1440 g·mol?1, PDI = 1.8) with a functionalization rate of 100% was synthesized using a P,O-chelated catalyst [Ni\Ph2PC(COOEt)═C(C6H5)O\Ph(PPh3)]. Thiol?ene reactions were subsequently undertaken between vinyl-terminated polyethylene and the thiol-containing molecules thioglycolic acid, 2-mercaptoethanol, 1-thioglycerol, chloropropanethiol, and methyl thioglycolate. A range of end-functionalized polyethylenes was thus prepared using simple reaction conditions and exhibiting degrees of functionalization higher than 93%.

International audience

International audience; An alpha-[Cu(II)-porphyrin]-polyethylene was synthesized for the first time using copper catalyzed 1,3-dipolar azide-alkyne Huisgen cycloaddition yielding highly colored moiety-substituted polyethylene.

International audience; Nickel complexes [(X,O)NiR(PPh(3))] (X = N or P), designed for the polymerization of ethylene, were found to be efficient for the homo- and copolymerization of butylacrylate (BuA), methylmethacrylate (MMA), and styrene. Their role as a radical initiator was demonstrated from the calculation of the copolymerization reactivity ratios. It was shown that the efficiency of the radical initiation is improved by the addition of PPh3 to the nickel complexes as well as by increasing the temperature. The dual role of a nickel complex as radical initiator and catalyst was exploited to succeed in the copolymerization of ethylene with BuA and MMA. Multiblock copolymers containing sequences of both ethylene and polar monomers were thus prepared for the first time by a dual radical/catalytic mechanism.

International audience; Copolymers of ethylene with methyl methacrylate (EMMA) and butyl acrylate (EBA), which are of different average chemical composition and block lengths according to NMR analysis, were analyzed by size exclusion chromatography (SEC), differential scanning calorimetry (DSC), Crystallization Analysis Fractionation (CRYSTAF), and high performance liquid chromatography at high temperature (HT-HPLC). With CRYSTAF and DSC crystallizing fractions were detected only in some samples. HT-HPLC fractionated all the samples irrespective of their crystallinity. Homopolymers, PMMA and PE were also found in the copolymer samples of EMMA. EMMA and EBA were separated in HPLC according to the content of polar comonomer. A linear correlation between the MMA content and elution volume could not be established due to the presence of homopolymers as admixtures. In such a case the average chemical composition obtained by NMR does not correspond to the real chemical composition of the copolymers. Unlike EMMA the EBA samples eluted in single peaks, which was used for evaluation of their chemical composition distribution. The comparison of results obtained by fractionation via CRYSTAF and HT-HPLC clearly demonstrates the advantages of the chromatographic approach to study the chemical heterogeneity of olefin based copolymers.

The reaction of silylene-bridged bis(fluorenyl)dipotassium salts with neodymium tris(borohydride) afforded new neutral ansa-bis(fluorenyl)silane neodymium borohydrides: (Flu2SiR2)Nd(BH4)(THF) [R2 = Me2, Et2, (CH2)3, Me(Ph), Flu = C13H8] that were better characterised and more soluble than the previously described anionic [(Flu2SiMe2)Nd(BH4)2]−. The X-ray structures of three of these complexes were determined, and their solid-state geometrical parameters are very similar, despite the ring strain introduced by the silacyclobutane bridge in [Flu2Si(CH2)3]Nd(BH4)(THF). The main geometrical features were satisfactorily reproduced by DFT calculations. The catalytic activity of the title complexes in ethylene–butadiene copolymerisation reactions was assessed and compared to that of the reported activity of [(Flu2SiMe2)Nd(BH4)2]− under similar conditions. From these results it can be concluded that the cyclo-copolymerisation of ethylene with butadiene is characteristic of a catalyst featuring silylene-bridged bis(fluorenyl) ligands around neodymium, and appears to be independent of the substituents at the silicon atom.

International audience; Free radical polymerization of ethylene in an intermediate pressure and temperature range (P(ethylene) < 250 bar and 50 degrees C < T < 90 degrees C) in the presence of an organic solvent has been studied. Under selected conditions ( P, T) and according to the amount of organic solvent added, either a supercritical monophasic or a biphasic medium is obtained. In the case of a biphasic medium, polymerization occurred in the liquid phase in which radical initiator and ethylenes are dissolved. The transition between a monophasic to a biphasic medium has been predicted using thermodynamic calculations and has been related to experimental observations such as the dependence of polymerization activity versus solvent volume.

International audience; Ethylene polymerization is performed industrially either by radical polymerization under severe conditions (1000-4000 bar, 200-300°C) or by catalytic mechanism at lower temperatures (usually less than 100°C) and pressures (below 50 bar). Standard radical polymerization conditions are too severe to permit a fine control of the macromolecular architecture. Under milder conditions radical ethylene polymerization is assumed to be ineffective, which has been confirmed using toluene as solvent. The efficiency of free radical polymerization under mild conditions (up to 250 bar of ethylene and a polymerization temperature between 50°C to 90°C) has been investigated in THF which is a more polar solvent than toluene. In this solvent, polyethylene has been obtained with relatively good yields highlighting an unexpected high solvent effect in the free radical ethylene polymerization. This solvent effect has been rationalized using theoretical considerations

International audience; We investigate the synthesis of dihydroxytelechelic poly(ethylene-co-1,3-butadiene) via metathetical depolymerization of the corresponding high molar mass copolymers in the presence of first generation Grubbs catalyst and butene diacetate as functionalizing chain transfer agent, followed by hydrolysis of the acetoxy chain ends. Formation of telechelic oligomers is complicated by a fast back-biting reaction leading to cyclohexene and macrocycles production. The thermodynamically favored formation of unsaturated six membered ring results from the presence of 1,7-dienic unsaturations in the starting copolymer. Macrocycles also rapidly and almost quantitatively form in the first reaction stage. Opportunely they can re-open in the presence of functionalizing transfer agent, owing that the later is introduced in molar excess with respect to the macrocycle, finally yielding linear dihydroxytelechelic oligomers.

International audience

A synthetic method for the production of polyethylene (PE) chains carrying alkoxyamine end-group has been proposed first by successfully reacting the well-known 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO) and N-(2-methyl-2-propyl)-N-(1-diethylphosphono-2,2-dimethylpropyl)-N-oxyl (commonly called SG1) stable radicals with dipolyethylenylmagnesium compounds to give PE-TEMPO and PE-SG1. Since the homolytic cleavage of these two macroalkoxyamines for the production of block copolymers using controlled radical polymerization would require temperatures higher than 160 °C, two original new nitroxides (4-[(2,2-dimethyl-4-(N-tert-Butyl-N-(1-diethoxyphosphoryl-2,2-dimethylpropyl)aminoxy)-4-n-butoxycarbonyl)butanoyloxyl]-2,2,6,6-tetramethylpiperidinyl-1-oxy, DD1) and 4-[(2,2-dimethyl-4-(N-tert-Butyl-N-(1-diethoxyphosphoryl-2,2-dimethylpropyl)aminoxy)-4-phenyl) butanoyloxyl]-2,2,6,6-tetramethylpiperidinyl-1-oxy, DD2) containing a TEMPO moiety and incorporating an SG1-based alkoxyamine (cleavage temperature: 60 °C) were then synthesized. NMR analyses showed that the resulting PE-DD1 and PE-DD2 were obtained using this functionalization strategy though with low to moderate yields (from 17% to 40%). PE-DD2 (40% functionalization) was used under controlled radical polymerization conditions of n-butyl acrylate. SEC analyses together with 1H NMR analysis showed that a poly(ethylene-b-n-butyl acrylate) block copolymer was produced and that the polymerization proceeded under control. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2705–2718, 2007

The neodymium borohydride complexes Me2Si(3-Me 3 Si-C 5 H 3 ) 2 NdBH 4 (THF) 2 and [Me 2 Si(C 5 H 4 )(C 13 H 8 )-Nd(BH4)2][Li(THF)] · 0.5LiBH 4 were prepared. These compounds in combination with Mg(Bu)(Oct) were investigated as catalytic systems for polymerization of ethylene and copolymerization of ethylene with butadiene. Similar polymerization results were obtained using these new precursors, in comparison with chloride analogues. This suggests that the same active species are formed in both cases. The easier isolation and characterization of the complex, [Me 2 Si(C 5 H 4 )(C 13 H 8 )-Nd(BH 4 ) 2 ][Li(THF)]·0.5LiBH 4 , than its chloride analogue constitutes the evidence of the interest of the new precursor family.

Di-polyethylenyl magnesium compounds, obtained by a transition metal catalyzed chain growth reaction on butyloctyl magnesium, are reacted with a range of disulfides of thiocarbonylated compounds (RC(S)SSC(S)R). Xanthate, dithiocarbamate, dithioester, and trithiocarbonate-functionalized polyethylenes are thus obtained and characterized by 1 H NMR and IR spectroscopy, and MALDI TOF mass spectrometry. These macroRAFT agents may serve as building blocks for the synthesis of block copolymers based on polyolefins and polar segments.

International audience; New nanocomposite films were prepared with atactic polypropylene as the matrix and either of three types of cellulose whiskers, with various surface and dispersion characteristics, as the reinforcing phase: aggregated without surface modification, aggregated and grafted with maleated polypropylene or individualized and finely dispersed with a surfactant. Films obtained by solvent casting from toluene were investigated by means of scanning electron microscopy, dynamic mechanical analysis, and tensile testing. In the linear region, the mechanical properties above the glass-rubber transition were found to be drastically enhanced for the nanocomposites as compared to the neat polypropylene matrix. These effects were ascribed to the formation of a rigid network with filler/filler interactions. In addition, interactions between the filler and the matrix as well as the dispersion quality were found to play a major role on the mechanical properties of the composites when investigation of the films was performed in the nonlinear region.

The field of the copolymerization of olefins with conjugated dienes has been investigated. While the insertion of butadiene is often limited with most catalyst systems designed for olefin polymerization, lanthanide metallocene catalysts insert butadiene with good efficiency. In the present paper, the preparation of a vast range of products including new polymers is reviewed.