Search

Texture analysis is an important topic in Ultrasound (US) image analysis for structure segmentation and tissue classification. In this work a novel approach for US image texture feature extraction is presented. It is mainly based on parametrical modelling of a signal version of the US image in order to process it as data resulting from a dynamical process. Because of the predictive characteristics of such a model representation, good estimations of texture features can be obtained with less data than generally used methods require, allowing higher robustness to low Signal-to-Noise ratio and a more localized US image analysis. The usability of the proposed approach was demonstrated by extracting texture features for segmenting the thyroid in US images. The obtained results showed that features corresponding to energy ratios between different modelled texture frequency bands allowed to clearly distinguish between thyroid and non-thyroid texture. A simple k-means clustering algorithm has been used for separating US image patches as belonging to thyroid or not. Segmentation of thyroid was performed in two different datasets obtaining Dice coefficients over 85%. [ABSTRACT FROM AUTHOR]

Forgery detection is essential to verify the integrity and authenticity of images. Existing block-based detection techniques detect forgery in the same image, most of which use similar frameworks while differ in the feature extraction schemes. These methods have high accuracy in detecting the forged regions, but the computational load is heavy when facing exhaustive search problems. This paper describes a forgery detection method based on local binary pattern residue classes and color regions. An image is divided into overlapped blocks. Local binary pattern residue classes are computed for each block. The plane formed by a dimensional and b dimensional from Lab color space is divided into 16 regions. Similar blocks are searched in the overlapped blocks with the same local binary pattern residue class and color region, then they are grouped into several suspicious regions. Finally, we analyze the multi-region relation of these suspicious regions and their areas to locate the tampered regions. The small hole is filled through the morphologic operation. The results of experiments demonstrated that our method has good performance in that it improved detection accuracy and reduced execution time under various challenging conditions. As the proposed method reduces the search range for similar blocks, it has a higher speed than exhaustive search and has comparable detection results at the same time. [ABSTRACT FROM AUTHOR]

The anatomical structure of wood is complex and contains considerable information about its specific species, physical properties, growth environment, and other factors. While conventional wood anatomy has been established by systematizing the xylem anatomical features, which enables wood identification generally up to genus level, it is difficult to describe all the information comprehensively. This study apply two computer vision approaches to optical micrographs: the scale-invariant feature transform algorithm and connected-component labelling. They extract the shape and pore size information, respectively, statistically from the whole micrographs. Both approaches enable the efficient detection of specific features of 18 species from the family Fagaceae. Although the methods ignore the positional information, which is important for the conventional wood anatomy, the simple information on the shape or size of the elements is enough to describe the species-specificity of wood. In addition, according to the dendrograms calculated from the numerical distances of the features, the closeness of some taxonomic groups is inconsistent with the types of porosity, which is one of the typical classification systems for wood anatomy, but consistent with the evolution based on molecular phylogeny; for example, ring-porous group Cerris and radial-porous group Ilex are nested in the same cluster. We analyse which part of the wood structure gave the taxon-specific information, indicating that the latewood zone of group Cerris is similar to the whole zone of group Ilex. Computer vision approaches provide statistical information that uncovers new aspects of wood anatomy that have been overlooked by conventional visual inspection. [ABSTRACT FROM AUTHOR]

The perennial and stoloniferous weed, Cynodon dactylon (L.) Pers. (bermudagrass), is a serious problem in vineyards. The spectral similarity between bermudagrass and grapevines makes discrimination of the two species, based solely on spectral information from multi-band imaging sensor, unfeasible. However, that challenge can be overcome by use of object-based image analysis (OBIA) and ultra-high spatial resolution Unmanned Aerial Vehicle (UAV) images. This research aimed to automatically, accurately, and rapidly map bermudagrass and design maps for its management. Aerial images of two vineyards were captured using two multispectral cameras (RGB and RGNIR) attached to a UAV. First, spectral analysis was performed to select the optimum vegetation index (VI) for bermudagrass discrimination from bare soil. Then, the VI-based OBIA algorithm developed for each camera automatically mapped the grapevines, bermudagrass, and bare soil (accuracies greater than 97.7%). Finally, site-specific management maps were generated. Combining UAV imagery and a robust OBIA algorithm allowed the automatic mapping of bermudagrass. Analysis of the classified area made it possible to quantify grapevine growth and revealed expansion of bermudagrass infested areas. The generated bermudagrass maps could help farmers improve weed control through a well-programmed strategy. Therefore, the developed OBIA algorithm offers valuable geo-spatial information for designing site-specific bermudagrass management strategies leading farmers to potentially reduce herbicide use as well as optimize fuel, field operating time, and costs. [ABSTRACT FROM AUTHOR]

Free amino acids are an important indicator of the freshness of yellow tea. This study investigated a novel procedure for predicting the free amino acid (FAA) concentration of yellow tea. It was developed based on the combined spectral and textural features from hyperspectral images. For the purposes of exploration and comparison, hyperspectral images of yellow tea (150 samples) were captured and analyzed. The raw spectra were preprocessed with Savitzky-Golay (SG) smoothing. To reduce the dimension of spectral data, five feature wavelengths were extracted using the successive projections algorithm (SPA). Five textural features (angular second moment, entropy, contrast, correlation, and homogeneity) were extracted as textural variables from the characteristic grayscale images of the five characteristic wavelengths using the gray-level co-occurrence matrix (GLCM). The FAA content prediction model with different variables was established by a genetic algorithm-support vector regression (GA-SVR) algorithm. The results showed that better prediction results were obtained by combining the feature wavelengths and textural variables. Compared with other data, this prediction result was still very satisfactory in the GA-SVR model, indicating that data fusion was an effective way to enhance hyperspectral imaging ability for the determination of free amino acid values in yellow tea. [ABSTRACT FROM AUTHOR]

Analyzing geological drilling hole images acquired by Axial View Panoramic Borehole Televiewer (APBT) is a key step to explore the geological structure in a geological exploration. Conventionally, the borehole images are examined by technicians, which is inefficient and subjective. In this paper, three dominant types of borehole-wall images on coal-rock mass structure, namely, border images, fracture images and intact rock mass images are mainly studied. The traditional image classification methods based on unified feature extraction algorithm and single classifier is not effect for the borehole images. Therefore, this paper proposes a novel two-stage classification approach to improve the classification performance of borehole images. In the first-stage classification, the border images are identified from three kinds of images based on texture features and gray-scale histograms features. For the remaining two types of images, in the second-stage classification, Gabor filter is first applied to segment the region of interest (ROI) (such as microfracture, absciss layer and horizontal cracks, etc.) and the central interference region. Then, using the same feature vector after eliminating the central interference region, fracture images are separated from intact rock mass images. We test our two-stage classification system with real borehole images. The results of experimental show that the two-stage classification method can effectively classify three major borehole-wall images with the correction rate of 95.55% in the first stage and 95% in the second stage. [ABSTRACT FROM AUTHOR]

The integrity of image content is essential, although most watermarking algorithms can achieve image authentication but not automatically repair damaged areas or restore the original image. In this paper, a self-recovery reversible image watermarking algorithm is proposed to recover the tampered areas effectively. First of all, the original image is divided into homogeneous blocks and non-homogeneous blocks through multi-scale decomposition, and the feature information of each block is calculated as the recovery watermark. Then, the original image is divided into 4×4 non-overlapping blocks classified into smooth blocks and texture blocks according to image textures. Finally, the recovery watermark generated by homogeneous blocks and error-correcting codes is embedded into the corresponding smooth block by mapping; watermark information generated by non-homogeneous blocks and error-correcting codes is embedded into the corresponding non-embedded smooth block and the texture block via mapping. The correlation attack is detected by invariant moments when the watermarked image is attacked. To determine whether a sub-block has been tampered with, its feature is calculated and the recovery watermark is extracted from the corresponding block. If the image has been tampered with, it can be recovered. The experimental results show that the proposed algorithm can effectively recover the tampered areas with high accuracy and high quality. The algorithm is characterized by sound visual quality and excellent image restoration. [ABSTRACT FROM AUTHOR]

Side scan sonar in low-cost ‘fishfinder’ systems has become popular in aquatic ecology and sedimentology for imaging submerged riverbed sediment at coverages and resolutions sufficient to relate bed texture to grain-size. Traditional methods to map bed texture (i.e. physical samples) are relatively high-cost and low spatial coverage compared to sonar, which can continuously image several kilometers of channel in a few hours. Towards a goal of automating the classification of bed habitat features, we investigate relationships between substrates and statistical descriptors of bed textures in side scan sonar echograms of alluvial deposits. We develop a method for automated segmentation of bed textures into between two to five grain-size classes. Second-order texture statistics are used in conjunction with a Gaussian Mixture Model to classify the heterogeneous bed into small homogeneous patches of sand, gravel, and boulders with an average accuracy of 80%, 49%, and 61%, respectively. Reach-averaged proportions of these sediment types were within 3% compared to similar maps derived from multibeam sonar. [ABSTRACT FROM AUTHOR]

One method of solving the single-image super-resolution problem is to use Heaviside functions. This has been done previously by making a binary classification of image components as “smooth” and “non-smooth”, describing these with approximated Heaviside functions (AHFs), and iteration including l1 regularization. We now introduce a new method in which the binary classification of image components is extended to different degrees of smoothness and non-smoothness, these components being represented by various classes of AHFs. Taking into account the sparsity of the non-smooth components, their coefficients are l1 regularized. In addition, to pick up more image details, the new method uses an iterative refinement for the residuals between the original low-resolution input and the downsampled resulting image. Experimental results showed that the new method is superior to the original AHF method and to four other published methods. [ABSTRACT FROM AUTHOR]

The structure and appearance of the blood vessel network in retinal fundus images is an essential part of diagnosing various problems associated with the eyes, such as diabetes and hypertension. In this paper, an automatic retinal vessel segmentation method utilizing matched filter techniques coupled with an AdaBoost classifier is proposed. The fundus image is enhanced using morphological operations, the contrast is increased using contrast limited adaptive histogram equalization (CLAHE) method and the inhomogeneity is corrected using Retinex approach. Then, the blood vessels are enhanced using a combination of B-COSFIRE and Frangi matched filters. From this preprocessed image, different statistical features are computed on a pixel-wise basis and used in an AdaBoost classifier to extract the blood vessel network inside the image. Finally, the segmented images are postprocessed to remove the misclassified pixels and regions. The proposed method was validated using publicly accessible Digital Retinal Images for Vessel Extraction (DRIVE), Structured Analysis of the Retina (STARE) and Child Heart and Health Study in England (CHASE_DB1) datasets commonly used for determining the accuracy of retinal vessel segmentation methods. The accuracy of the proposed segmentation method was comparable to other state of the art methods while being very close to the manual segmentation provided by the second human observer with an average accuracy of 0.972, 0.951 and 0.948 in DRIVE, STARE and CHASE_DB1 datasets, respectively. [ABSTRACT FROM AUTHOR]

Top-coal caving technology is a productive and efficient method in modern mechanized coal mining, the study of coal-rock recognition is key to realizing automation in comprehensive mechanized coal mining. In this paper we propose a new discriminant analysis framework for coal-rock recognition. In the framework, a data acquisition model with vibration and acoustic signals is designed and the caving dataset with 10 feature variables and three classes is got. And the perfect combination of feature variables can be automatically decided by using the multi-class F-score (MF-Score) feature selection. In terms of nonlinear mapping in real-world optimization problem, an effective minimum enclosing ball (MEB) algorithm plus Support vector machine (SVM) is proposed for rapid detection of coal-rock in the caving process. In particular, we illustrate how to construct MEB-SVM classifier in coal-rock recognition which exhibit inherently complex distribution data. The proposed method is examined on UCI data sets and the caving dataset, and compared with some new excellent SVM classifiers. We conduct experiments with accuracy and Friedman test for comparison of more classifiers over multiple on the UCI data sets. Experimental results demonstrate that the proposed algorithm has good robustness and generalization ability. The results of experiments on the caving dataset show the better performance which leads to a promising feature selection and multi-class recognition in coal-rock recognition. [ABSTRACT FROM AUTHOR]

This paper provides evidence on the usefulness of very high spatial resolution (VHR) imagery in gathering socioeconomic information in urban settlements. We use land cover, spectral, structure and texture features extracted from a Google Earth image of Liverpool (UK) to evaluate their potential to predict Living Environment Deprivation at a small statistical area level. We also contribute to the methodological literature on the estimation of socioeconomic indices with remote-sensing data by introducing elements from modern machine learning. In addition to classical approaches such as Ordinary Least Squares (OLS) regression and a spatial lag model, we explore the potential of the Gradient Boost Regressor and Random Forests to improve predictive performance and accuracy. In addition to novel predicting methods, we also introduce tools for model interpretation and evaluation such as feature importance and partial dependence plots, or cross-validation. Our results show that Random Forest proved to be the best model with an R2 of around 0.54, followed by Gradient Boost Regressor with 0.5. Both the spatial lag model and the OLS fall behind with significantly lower performances of 0.43 and 0.3, respectively. [ABSTRACT FROM AUTHOR]

The objectives were to compare the performance of a segmentation algorithm, based on the minimization of an uncertainty function, to delineate contours of external elastic membrane and lumen of human coronary arteries imaged with 40 and 60 MHz IVUS, and to use values of this function to delineate portions of contours with highest uncertainty. For 8 patients, 40 and 60 MHz IVUS coronary data acquired pre- and post-interventions were used, for a total of 68,516 images. Manual segmentations of contours (on 2312 images) performed by experts at three core laboratories were the gold-standards. Inter-expert variability was highest on contour points with largest values of the uncertainty function (p < 0.001). Inter-expert variability was lower at 60 than 40 MHz for external elastic membrane (p = 0.013) and lumen (p = 0.024). Average differences in plaque (and atheroma) burden between algorithmic contours and experts’ contours were within inter-expert variability (p < 0.001). [ABSTRACT FROM AUTHOR]

A clinical tool that can diagnose psychiatric illness using functional or structural magnetic resonance (MR) brain images has the potential to greatly assist physicians and improve treatment efficacy. Working toward the goal of automated diagnosis, we propose an approach for automated classification of ADHD and autism based on histogram of oriented gradients (HOG) features extracted from MR brain images, as well as personal characteristic data features. We describe a learning algorithm that can produce effective classifiers for ADHD and autism when run on two large public datasets. The algorithm is able to distinguish ADHD from control with hold-out accuracy of 69.6% (over baseline 55.0%) using personal characteristics and structural brain scan features when trained on the ADHD-200 dataset (769 participants in training set, 171 in test set). It is able to distinguish autism from control with hold-out accuracy of 65.0% (over baseline 51.6%) using functional images with personal characteristic data when trained on the Autism Brain Imaging Data Exchange (ABIDE) dataset (889 participants in training set, 222 in test set). These results outperform all previously presented methods on both datasets. To our knowledge, this is the first demonstration of a single automated learning process that can produce classifiers for distinguishing patients vs. controls from brain imaging data with above-chance accuracy on large datasets for two different psychiatric illnesses (ADHD and autism). Working toward clinical applications requires robustness against real-world conditions, including the substantial variability that often exists among data collected at different institutions. It is therefore important that our algorithm was successful with the large ADHD-200 and ABIDE datasets, which include data from hundreds of participants collected at multiple institutions. While the resulting classifiers are not yet clinically relevant, this work shows that there is a signal in the (f)MRI data that a learning algorithm is able to find. We anticipate this will lead to yet more accurate classifiers, over these and other psychiatric disorders, working toward the goal of a clinical tool for high accuracy differential diagnosis. [ABSTRACT FROM AUTHOR]

High-efficiency video compression technology is of primary importance to the storage and transmission of digital medical video in modern medical communication systems. To further improve the compression performance of medical ultrasound video, two innovative technologies based on diagnostic region-of-interest (ROI) extraction using the high efficiency video coding (H.265/HEVC) standard are presented in this paper. First, an effective ROI extraction algorithm based on image textural features is proposed to strengthen the applicability of ROI detection results in the H.265/HEVC quad-tree coding structure. Second, a hierarchical coding method based on transform coefficient adjustment and a quantization parameter (QP) selection process is designed to implement the otherness encoding for ROIs and non-ROIs. Experimental results demonstrate that the proposed optimization strategy significantly improves the coding performance by achieving a BD-BR reduction of 13.52% and a BD-PSNR gain of 1.16 dB on average compared to H.265/HEVC (HM15.0). The proposed medical video coding algorithm is expected to satisfy low bit-rate compression requirements for modern medical communication systems. [ABSTRACT FROM AUTHOR]

Objective: Evaluation of a new iterative reconstruction algorithm (IMR) for detection/rule-out of pulmonary embolism (PE) in ultra-low dose computed tomography pulmonary angiography (CTPA). Methods: Lower dose CT data sets were simulated based on CTPA examinations of 16 patients with pulmonary embolism (PE) with dose levels (DL) of 50%, 25%, 12.5%, 6.3% or 3.1% of the original tube current setting. Original CT data sets and simulated low-dose data sets were reconstructed with three reconstruction algorithms: the standard reconstruction algorithm “filtered back projection” (FBP), the first generation iterative reconstruction algorithm iDose and the next generation iterative reconstruction algorithm “Iterative Model Reconstruction” (IMR). In total, 288 CTPA data sets (16 patients, 6 tube current levels, 3 different algorithms) were evaluated by two blinded radiologists regarding image quality, diagnostic confidence, detectability of PE and contrast-to-noise ratio (CNR). Results: iDose and IMR showed better detectability of PE than FBP. With IMR, sensitivity for detection of PE was 100% down to a dose level of 12.5%. iDose and IMR showed superiority to FBP regarding all characteristics of subjective (diagnostic confidence in detection of PE, image quality, image noise, artefacts) and objective image quality. The minimum DL providing acceptable diagnostic performance was 12.5% (= 0.45 mSv) for IMR, 25% (= 0.89 mSv) for iDose and 100% (= 3.57 mSv) for FBP. CNR was significantly (p < 0.001) improved by IMR compared to FBP and iDose at all dose levels. Conclusion: By using IMR for detection of PE, dose reduction for CTPA of up to 75% is possible while maintaining full diagnostic confidence. This would result in a mean effective dose of approximately 0.9 mSv for CTPA. [ABSTRACT FROM AUTHOR]

Quantitative histomorphometry (QH) refers to the application of advanced computational image analysis to reproducibly describe disease appearance on digitized histopathology images. QH thus could serve as an important complementary tool for pathologists in interrogating and interpreting cancer morphology and malignancy. In the US, annually, over 60,000 prostate cancer patients undergo radical prostatectomy treatment. Around 10,000 of these men experience biochemical recurrence within 5 years of surgery, a marker for local or distant disease recurrence. The ability to predict the risk of biochemical recurrence soon after surgery could allow for adjuvant therapies to be prescribed as necessary to improve long term treatment outcomes. The underlying hypothesis with our approach, co-occurring gland angularity (CGA), is that in benign or less aggressive prostate cancer, gland orientations within local neighborhoods are similar to each other but are more chaotically arranged in aggressive disease. By modeling the extent of the disorder, we can differentiate surgically removed prostate tissue sections from (a) benign and malignant regions and (b) more and less aggressive prostate cancer. For a cohort of 40 intermediate-risk (mostly Gleason sum 7) surgically cured prostate cancer patients where half suffered biochemical recurrence, the CGA features were able to predict biochemical recurrence with 73% accuracy. Additionally, for 80 regions of interest chosen from the 40 studies, corresponding to both normal and cancerous cases, the CGA features yielded a 99% accuracy. CGAs were shown to be statistically signicantly () better at predicting BCR compared to state-of-the-art QH methods and postoperative prostate cancer nomograms. [ABSTRACT FROM AUTHOR]