Search

Latent Heat Storage (LHS) with Phase-Change Materials (PCMs) represents a high energy density storage technology which could be applied in a variety of applications such as waste heat recovery and integration of renewable energy technologies in energy systems. To increase the sustainability of these storage solutions, PCMs have to be developed with particular regard to bio-origin and biodegradability. Triglycerides represent an interesting class of esters as the main constituents of animal and vegetable fats, with attractive thermal properties. In order to be used as PCMs, the thermal behaviour of triglycerides has to be fully understood, as in some cases they have been reported to show polymorphism and supercooling. This study assesses the suitability of triglycerides as PCMs by reviewing the literature published so far on their behaviour and properties. In particular, melting points, enthalpies of fusion, polymorphism, thermal conductivities, heat capacities and thermal cycling stabilities are considered, with a focus on LHS and thermal energy storage applications. In addition, the efforts conducted regarding modelling and the prediction of melting points and enthalpies based on chemical structures are summarized and assessed.

Given their amphiphilic nature and chemical structure, phospholipids exhibit a strong thermotropic and lyotropic phase behaviour in an aqueous environment. Around the phase transition temperature, phospholipids transform from a gel-like state to a fluid crystalline structure. In this transition, many key characteristics of the lipid bilayers such as structure and thermal properties alter. In this study, we employed atomistic simulation techniques to study the structure and underlying mechanisms of heat transfer in dipalmitoylphosphatidylcholine (DPPC) lipid bilayers around the fluid-gel phase transformation. To investigate this phenomenon, we performed non-equilibrium molecular dynamics simulations for a range of different temperature gradients. The results show that the thermal properties of the DPPC bilayer are highly dependent on the temperature gradient. Higher temperature gradients cause an increase in the thermal conductivity of the DPPC lipid bilayer. We also found that the thermal conductivity of DPPC is lowest at the transition temperature whereby one lipid leaflet is in the gel phase and the other is in the liquid crystalline phase. This is essentially related to a growth in thermal resistance between the two leaflets of lipid at the transition temperature. These results provide significant new insights into developing new thermal insulation for engineering applications., (© 2017 The Authors.)

To optimize the comprehensive performance of rare earth (RE) aluminates as thermal/environmental barrier coatings (T/EBCs), we engineered six kinds of novel high-entropy RE aluminate multiphase ceramics with the coexisting garnet and perovskite phases by regulating equivalent ionic radius of RE3+, and the relationship between the microstructure and thermal properties, as well as resistance to CMAS corrosion was investigated in-detail. The findings revealed that the garnet (5RE 0.2) 3 Al 5 O 12 content gradually decreased in multiphase ceramics with the increasing equivalent ionic radius of RE3+. The interaction between garnet and perovskite grains can decrease grain size, which in turn enhanced phonon scattering, thereby leading to the decrease in thermal conductivity. Moreover, the synergistic effect in the different dissolution rates of garnet and perovskite phases can form a dense garnet/apatite barrier layer at corrosion front, thereby contributing to CMAS corrosion resistance. These results provide a robust theoretical foundation for the advancement of next-generation T/EBCs. [ABSTRACT FROM AUTHOR]

Materials with a thermal expansion coefficient compatible with silicon carbide based ceramic matrix composites and low thermal conductivity at higher temperatures are crucial for developing environmental barrier coatings (EBCs) for aero-engines. Lately, high entropy silicate engineering has been a promising approach to develop optimized EBC materials. The solid solution reaction method was adopted for the fabrication of high entropy multicomponent (Dy 1/5 Er 1/5 Tm 1/5 Yb 1/5 Y 1/5) 2 SiO 5 or (5RE 1/5) 2 SiO 5 monosilicate. Scanning electron microscopy and X-ray diffraction show the homogenous distribution and a single-phase solution of (5RE 1/5) 2 SiO 5 monosilicate. Differential scanning calorimetry testing was done at 1450 °C which shows no exo/endothermic reaction has occurred. The value of the coefficient of thermal expansion (6 ppm/°C) up to temperature 1500 °C and low thermal conductivity values for (5RE 1/5) 2 SiO 5 monosilicate were observed (1.1–1.4 W/m°C) in the temperature range between 25 and 1500 °C. The water vapor corrosion resistance of (5RE 1/5) 2 SiO 5 monosilicate further confirms that the material is suitable for EBC applications due to the synergistic effect of different rare earth radii and stable crystal structure with a negligible weight loss value of 0.0005 mg/cm2 after 150 h corrosion time under 90 % H 2 O and 10 % O 2 at 1300 °C. The results of this work suggest that (5RE 1/5) 2 SiO 5 monosilicate can be used as a promising candidate for environmental barrier coatings. [ABSTRACT FROM AUTHOR]

A coral-like network carbon aerogel was synthesized by introducing acid-modified carbon nanofibers (a-CNF) into phenolic (PR) aerogel through chemical grafting, followed by high-temperature carbonization. The bonding interaction between a-CNF and PR was analyzed by FT-IR spectroscopy. The microstructure of a-CNF/PR composite aerogel (a-CNF/PRA) was studied by SEM and pore structure analysis. The results showed that introducing 5 wt% of a-CNF was most favorable for forming a porous network of a-CNF/PRA. SEM photographs and pore structure analysis indicated that a-CNF/C composite aerogel (a-CNF/CA) developed a stable porous skeletal structure during carbonization. TEM images revealed that the complete porous skeleton consisted of a-CNF encapsulated by carbon layers. The carbonization shrinkage of a-CNF/CA was only 26.53% due to the presence of a-CNF as the skeleton support. Compared to carbon aerogel, a-CNF/CA exhibited lower density (0.072 g cm−3), thermal conductivity (0.0452 W m−1 K−1), and higher compressive strength (up to 3.26 MPa) up to 3.26 MPa than that of carbon aerogel (1.21 MPa). These findings confirmed the excellent mechanical and thermal insulation properties of a-CNF/CA. [ABSTRACT FROM AUTHOR]

The objective of this study is to synthesize hollow SiO2 nanospheres (HSNs), and to investigate the effect of varying divinylbenzene (DVB) amounts during synthesis on their morphology and pore structure. Additionally, it seeks to characterize the thermal conductivity of the synthesized HSNs and evaluate the impact of their incorporation on the thermal insulation properties of acrylic coatings. Single‐shell HSNs were synthesized using the Stöber method, which involved hydrolysis‐polycondensation of tetraethyl orthosilicate. The double‐shell HSNs were prepared using a stepwise wrapping synthesis method, with single‐shell HSNs as the core matrix and an appropriate amount of crosslinking agent added. The addition of DVB resulted in different morphologies, shell spacings, and specific surface areas for the double‐shell HSNs. The thermal conductivity of the double‐shell HSNs decreased significantly to as low as 0.0252 W·m1·K−1 with an increase in shell spacing. The shell spacing of double‐shell HSNs had doubled, resulting in a reduction of its thermal conductivity by approximately 18%. When the double‐shell HSN content reached 8%, the thermal conductivity decreased by 85% compared to that of the original acrylate coating. These results indicate that double‐shell HSNs can substantially decrease the thermal conductivity of the matrix material for thermal insulation applications. [ABSTRACT FROM AUTHOR]

Si3N4 ceramics with improved thermal conductivity and mechanical properties were prepared by carbothermal reduction and two‐step sintering. The addition of 2 wt% C led to the development of an intergranular phase YNSiO2 with reduced oxygen content. Notably, setting the pre‐sintering temperature at 1450°C promoted the formation of a rough bimodal morphology within the Si3N4 ceramics. Furthermore, an extended holding period at 1850°C resulted in additional grain growth and the elimination of intergranular phases. The Si3N4 specimens produced at 1450°C for 3 h followed by 1850°C for 8 h, incorporating 2 wt% C, exhibited a notable continuity between Si3N4 grains. The thickness of the grain boundary layer was only about 1 nm, and the N/O atomic ratio of the intergranular phase was measured to be 0.42. Consequently, the resulting thermal conductivity, flexural strength, and fracture toughness of Si3N4 specimens were found to be 101 W·m−1·K−1, 712 ± 29 MPa, and 7.7 ± 0.2 MPa·m1/2, respectively. Compared with samples without C additive and directly sintered at 1850°C for 8 h, the Si3N4 specimens produced in this work showed a significant increase of more than 50% in thermal conductivity and about 17% in fracture toughness. [ABSTRACT FROM AUTHOR]

Cordierite-mullite composite ceramics were prepared by solid-state method using Panzhihua low-grade Ti-rich clay, talc, and alumina. Influences of cordierite/mullite ratio, sintering temperature, and the chemical composition of clay on the phase composition, microstructure, physical properties, and thermal properties were investigated in detail. The results showed that the impurity oxides inside the Ti-rich clay had a great ability of forming liquid. Above 1300 °C, the reaction between TiO 2 of the clay and Al 2 O 3 produced stable Al 2 TiO 5 , which was conducive to decreasing the coefficient of thermal expansion (CTE). At 1300–1350 °C, the secondary mullitization caused the volumetric expansion, decreasing the bending strength and increasing the CTE. The optimum ratio of cordierite to mullite ranged from 90:10 to 80:20, and the sample fired at 1400 °C exhibited the lowest water absorption and porosity (0.64 % and 1.56 %, respectively), optimal bulk density, and bending strength (2.59 g cm−3 and 87.79 MPa), as well as better CTE, thermal conductivity, and thermal storage density (2.91 × 10−6 °C−1, 4.11 W/(m⋅K) (30 °C), and 1181 kJ kg−1, respectively). Compared with the reported values of cordierite-based thermal storage ceramics prepared by using the high-grade clay or minerals, the obtained samples showed the advantages such as lower costs for raw materials, higher bending strength, higher thermal conductivity (1.63–2 times higher), low CTE, and high thermal storage density. This study demonstrated that the low-grade Ti/Fe-rich clay has excellent cost-effective potential for the preparation of thermal storage ceramics. [ABSTRACT FROM AUTHOR]

In the domain of personal thermal protection, there is a growing demand for lightweight and efficient ceramic thermal insulation materials. However, conventional ceramic membranes face challenges such as brittleness, structural collapse, and pulverization, hindering their practical application. To address this issue, aluminum hydroxide-enhanced silica-zirconia ceramic membranes (SZ@ANFMs) have been successfully fabricated using electrospinning followed by subsequent calcination processes, and their properties have been comprehensively evaluated. The results demonstrate that SZ@ANFMs exhibit outstanding high-temperature resistance under an alcohol lamp, along with an extremely low thermal conductivity (only 0.041 W/m·K), excellent tensile strength (2.3 MPa), and flexible characteristics. This makes them highly promising in the domain of personal thermal protection. The study builds upon existing research in lightweight and efficient thermal insulation materials, offering improvements and robust support for the further development of personal thermal protection technology. [ABSTRACT FROM AUTHOR]

This work created a fireproof sandwich structure in which the face sheets were made of expanded vermiculite and expanded perlite‐filled geopolymer composites and embedded basalt fiber mats and the core material was rock wool in designing the lightweight and cost‐effective fire‐resistant structure for steel bridges with excellent retardant and heat‐insulating performance. The effects of adding 5%, 10%, 15%, and 20% expanded vermiculite and expanded perlite to the geopolymer on mechanical properties and the thermal conductivity were investigated to obtain the optimized material mixtures for preparing the face‐sheets material of the sandwich panel. Then, the fireproof sandwich structures were fabricated and exposed to 800°C for 3 h to study the structural integrity, backfire side temperature, and mass loss ratio. The results indicated that adding 10 wt% expanded vermiculite and 10 wt% expanded perlite to the geopolymer achieved the retention of compressive strength of 66.5% after being exposed to 800°C, and the geopolymer mixtures showed a low thermal conductivity of 0.1942 W/(mK). The TOPSIS evaluation analysis reveals that the proposed fireproof sandwich panel had the highest integrated performance considering the structural weight, insulation properties, and cost. The findings of this work may provide some insights into fireproof and insulating applications in bridge engineering. [ABSTRACT FROM AUTHOR]

A high‐entropy rare‐earth disilicate (Er0.25Y0.25Ho0.25Yb0.25)2Si2O7 (hereinafter referred to as (EYHY)2Si2O7) ceramic was synthesized by a heat treatment process combined with spark plasma sintering. According to the experimental results, (EYHY)2Si2O7 presents good phase stability and low thermal conductivity ([1.48–2.35] W∙m−1∙K−1) from room temperature to 1200°C. Its coefficient of thermal expansion is (3.89–5.32) × 10−6 K−1 from 200 to 1400°C, similar to SiC‐based materials ([4.5–5.5] × 10−6 K−1). Due to the multiple doping effects, (EYHY)2Si2O7 exhibits outstanding corrosion resistance performance in water‐vapor corrosion tests. Its weight loss is 1.79 mg/cm2 after corrosion at 1600°C for 30 h in the presence of 50% H2O‐50% O2, which is lower than the corresponding four single components Re2Si2O7 (Er2Si2O7, Y2Si2O7, Ho2Si2O7, and Yb2Si2O7) under the same conditions. Therefore, high‐entropy (EYHY)2Si2O7 ceramics are regarded as potential environmental barrier coatings materials for SiC ceramic matrix composites. [ABSTRACT FROM AUTHOR]

In this study, composite phase change materials (CPCMs) comprising hexadecylamine (HDA) (C 16 H 35 N), disodium hydrogen phosphate dodecahydrate (DHPD) (Na 2 HPO 4 ·12H 2 O), and expanded graphite (EG) were prepared using the demulsification method. These CPCMs exhibit high latent heat and stable thermal properties. This approach effectively mitigates the issues of substantial supercooling and poor thermal conductivity commonly associated with DHPD and HDA. Additionally, the inclusion of EG imparts superior morphological stability to the CPCMs. The HDA/DHPD/EG CPCMs demonstrated robust thermal and morphological stability at temperatures below 100 °C. Their latent heat reached up to 221 J/g and remained stable at this value even after 50 cold-heat cycles, thereby indicating excellent cycling stability. When EG was incorporated at 2 wt%, the thermal conductivity of the HDA/DHPD/EG CPCMs increased to 0.751 W/(m·K), indicating that the three-dimensional network structure of EG facilitates heat conduction and offers exceptional photothermal conversion capabilities, with a photothermal conversion efficiency of up to 97.1 %. The aforementioned results highlight the promising potential of the prepared CPCMs for applications in low-temperature waste heat recovery. [ABSTRACT FROM AUTHOR]

BiCuSeO, an oxide thermoelectric material with a superlattice structure, presents the advantages of affordability, low toxicity, and environmental friendliness. However, its intrinsic low electrical conductivity has impeded its possible applications. To address this challenge, we put tiny PbZr 0.52 Ti 0.48 O 3 (PZT) with varying weight percentages (x = 0, 5, 7, 9, 11) into BiCuSeO (BCSO) to fabricate thermoelectric nanocomposites. Through the spark plasma sintering process, PZT particles underwent in-situ decomposition, generating nano-sized second phases such as PbO 2 , TiO 2 , and PbZrO 3 , which are homogenously distributed within BCSO matrix (validated by XRD and TEM). The introduced PbO 2 , TiO 2 , and PbZrO 3 second phases served a dual purpose: inhibiting the grain growth of BCSO and introducing additional nano-grain boundaries. This resulted in more effective phonon scattering sites, thereby reducing lattice thermal conductivity. Simultaneously, the Pb element derived from PZT decomposition was doped into the Bi site of the BCSO matrix, causing a reduction in the band gap of BCSO from 0.49 eV to 0.388 eV and a significant increase in carrier concentration. Consequently, this doping enhanced the electrical conductivity of BCSO-based composites, with the composite with 11 wt% PZT additive amount exhibiting a remarkable 318-fold increase, reaching 550 S/cm compared to pristine BCSO. Notably, the composite with 7 wt% PZT additive amount achieved an exceptionally low lattice thermal conductivity of 0.333 W m−1 K−1 at 823 K. Through the synergistic optimization of electrical and thermal transport properties, the BCSO-based composite with 7 wt% PZT additive amount obtained a ZT value of ∼0.9 at 873 K, representing a 2.45-fold increase compared to pristine BiCuSeO. This straightforward method presents a cost-effective and scalable approach to enhance the thermoelectric performance of various materials, opening new avenues for potential commercial applications. [ABSTRACT FROM AUTHOR]

Investigating how the thermal transport properties of iron change under extremely high pressure and temperature conditions, such as those found in the Earth's core, is a major experimental challenge. Over the past decade, there has been a great deal of discussion and debate surrounding the thermal conductivity of the iron-based Earth's core and its thermal evolution. One reason for this may be the variability in the experimentally obtained thermal conductivity of iron at high pressures and temperatures. In this study, we present the experimental results of measuring the thermal conductivity of hexagonal-closed-pack (hcp) iron over a wide pressure-temperature range up to 176 GPa and 2900 K using the pulsed light heating thermoreflectance technique in a laser-heated diamond anvil cell. Our findings indicate that the temperature derivative of the thermal conductivity of hcp iron undergoes a change from negative to positive above 74 GPa, potentially making hcp iron highly conductive at conditions similar to those observed in the Earth's core. This observation represents a notable example of a phenomenon where pressure appears to influence the sign of the temperature derivative of the thermal conductivity of an isostructural metal. [ABSTRACT FROM AUTHOR]

This article presents a comprehensive review of the advancements in the use of Date Palm Fiber (DPF) reinforced composites, highlighting their mechanical, thermal, and morphological properties and the enhancements achieved through various modification techniques. Date palm fibers, a sustainable and biodegradable resource, have garnered significant interest due to their potential in reducing environmental impact across several key industries, including building and construction, automotive, and packaging. The review discusses the effects of hybrid approaches and physical and chemical treatments on the mechanical properties of DPF composites, demonstrating improvements in tensile strength, elasticity, and flexural strength through optimized fiber‐matrix bonding and reduced moisture absorption. Thermal behavior analyses through Thermogravimetric Analysis (TGA), Dynamic Mechanical Analysis (DMA), and thermal conductivity underscore the composites' suitability for applications requiring high thermal stability and conductivity for insulation applications. Morphological studies reveal that surface‐treated fibers integrate more effectively with various polymeric matrices, leading to enhanced composite performance. The practical applications of DPF composites are explored, emphasizing their role in promoting sustainable manufacturing practices. Challenges such as scalability, cost‐efficiency, and performance consistency are addressed, alongside future perspectives that suggest a promising direction for further research and technological development in the field of natural fiber composites. This review aims to solidify the foundation for ongoing advancements and increase the adoption of DPF composites in commercial applications. [ABSTRACT FROM AUTHOR]

Hybrid carbon nanotube (CNT) sheets were fabricated by mixing CNTs with silver nanowires (AgNWs) and MXene to study their electromagnetic-interference (EMI)-shielding properties. CNT/AgNW and CNT/MXene hybrid sheets were produced by ultrasonic homogenization and vacuum filtration, resulting in free-standing CNT sheets. Three different weight ratios of AgNW and MXene were added to the CNT dispersions to produce hybrid CNT sheets. Microstructure characterization was performed using scanning electron microscopy, and the Wiedemann–Franz law was used to characterize transport properties. The resulting hybrid sheets exhibited improved electrical conductivity, thermal conductivity, and EMI-shielding effectiveness compared to pristine CNT sheets. X-band EMI-shielding effectiveness improved by over 200%, while electrical conductivity improved by more than 1500% in the hybrid sheets due to a higher charge-carrier density and synergistic effects between nanomaterials. The addition of AgNW to CNT sheets resulted in a large improvement in electrical conductivity and EMI shielding; however, this may also result in increased weight and sample thickness. Similarly, the addition of MXene to CNT sheets may result in an increase in weight due to the presence of the denser MXene flakes. [ABSTRACT FROM AUTHOR]

Thermal protection was always a prominent issue in the aerospace industry. For vehicle safety, reliability and payload requirements, thermal protection materials were usually expected to possess low density, superior mechanical and thermal insulation properties. Here, lightweight and high-strength porous mullite-silica ceramics were manufactured using particle-stabilized foaming technique. The strength and thermal insulation properties of porous ceramics modified with hollow silica spheres were significantly enhanced. A 10 wt% hollow spheres addition achieved a 28.9 % increase in strength and a 33.4 % decrease in thermal conductivity with almost constant porosity (from 86.39 % to 87.04 %). Considering the characteristics of light weight, high compression strength and superior thermal insulation performance, porous ceramics could be applied as thermal protection materials in the aerospace sector. [ABSTRACT FROM AUTHOR]

Porous high-entropy transition metal compounds, an important type of ultra-high temperature material, have attracted increasing attention in the applications of extreme environments due to their low density, good thermal insulation and stable chemical properties. A robust, flame-retardant and high-temperature resistant high-entropy carbonitride (Ti 1/5 V 1/5 Mo 1/5 Nb 1/5 Ta 1/5)(C 0.55 N 0.45) (HECN) porous ceramic was synthesized and thoroughly characterized. It exhibited a porosity of 93.5 %, a compressive strength of 1.3 MPa and a good high-temperature stability up to 1673 K, which, along with its outstanding fire-retardancy, and low thermal conductivity (as low as 0.150 W m−1 K−1 at 298 K), made it a good candidate material for thermal insulation applications in ultra-high temperature environments. Moreover, the Density functional theory (DFT) calculations predict that the [N]/([C]+[N]) ratio in HECN foam affects its lattice thermal conductivity which is decreased by 67 % upon increasing the ratio from 0 to 1/2. [ABSTRACT FROM AUTHOR]

The increasing demand for high-performance materials has led to the development of natural fiber composites as an alternative to synthetic fiber composites. However, the low thermal conductivity of natural fibers limits their use in advanced applications. In this study, we have developed polyaniline-coated natural fiber composites to enhance their thermal properties. The methodology of this study involves the preparation of natural fiber composites using polyaniline-coated natural fibers as a reinforcement and a bio-based resin as a matrix. The composites were then coated with polyaniline, which was synthesized through chemical oxidation of aniline monomer. The coated composites were characterized using various analytical techniques such as Fourier-transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis to evaluate their structural, morphological, and thermal properties. The materials used in this study were natural fibers, bio-based resin, aniline monomer, ammonium persulfate, and hydrochloric acid. The gap identification of this study is the low thermal conductivity of natural fiber composites, which limits their application in advanced fields such as aerospace, automotive, and electronics. The problem identification is the lack of a cost-effective and eco-friendly method to enhance the thermal properties of natural fiber composites. The results of this study showed that the polyaniline-coated natural fiber composites exhibited enhanced thermal conductivity compared to the uncoated composites. The improvement in the properties of the composites was attributed to the high conductivity of polyaniline and its ability to form a continuous conductive network throughout the composite matrix. The development of polyaniline-coated natural fiber composites provides a cost-effective and eco-friendly approach to enhance the thermal properties of natural fiber composites. This approach has the potential to expand the use of natural fiber composites in advanced applications, leading to a sustainable and greener future. [ABSTRACT FROM AUTHOR]

Diurnal and seasonal variations in soil and surface temperature measured with the HP3 ${\mathrm{H}\mathrm{P}}^{3}$ thermal probe and radiometer of NASA's InSight Mars mission are reported. At a representative depth of 10–20 cm, an average temperature of 217.5 K was found, varying by 5.3–6.7 K during a sol and by 13.3 K during the seasons. From the damping of the temperature variation with depth and the phase shift, a thermal diffusivity of (3.93 ± $\pm $ 0.39) × 10−8 ${10}^{-8}$m2 ${\mathrm{m}}^{2}$/s was derived for the upper ∼ ${\sim} $10 cm from the diurnal temperature variation and of (3.63 ± $\pm $ 0.53) × 10−8 ${10}^{-8}$m2 ${\mathrm{m}}^{2}$/s for the ∼ ${\sim} $40 cm depth range of the mole from the annual temperature variation. Using published thermal conductivity and inertia values together with the diffusivities, soil densities of 1,470 and 1,730 kg/m3 ${m}^{3}$ were derived for these depths. The temperatures allow the deliquescence of thin films of brine, the efflorescence of which may explain the cemented duricrust observed. Plain Language Summary: Temperature is an important factor in understanding the physical properties of Martian soil. It determines how quickly physical processes and chemical reactions occur, including the transport of heat and materials. Temperature is crucial to astrobiology because it affects the habitability of the soil and the potential for water or brine to support microbial life. We measured the temperature in the soil during several Martian days and over a Martian year using the NASA InSight Mars mission's Heat Flow and Physical Properties Package. The average temperature was −56°C (217.5 K) over the depth extent of the thermal probe, which was about 40 cm. The temperature varied by 5–7° during the day, which is only a tenth of the daily surface temperature variation. It varied by 13° during the seasons. The temperature is subfreezing for water, but it allows the formation of thin films of salty brine for 10 hr or more during a Martian day. The solidification of the brine is a likely explanation for the observed few tens of centimeters thick duricrust, a layer of consolidated, cohesive sand, which is thought to have hampered the penetration to greater depth of the mission's thermal probe. Key Points: We measured the temperature and its diurnal and annual variations in the top 40 cm of the Martian soil at the InSight landing siteThe soil thermal diffusivity was calculated from the diurnal and seasonal surface and soil temperature variationsThe soil temperature allows the formation of thin films of brine; their efflorescence may explain the formation of the observed duricrust [ABSTRACT FROM AUTHOR]

Rare‐earth hafnates are gaining attention due to their excellent high‐temperature phase stability and low thermal conductivity. However, they still have shortcomings of low thermal expansion and poor calcium‐magnesium‐aluminum‐silicate (CMAS) corrosion resistance. In this study, we employed high‐entropy engineering and component design to synthesize three high‐entropy hafnates (La0.2Ce0.2Nd0.2Gd0.2T0.2)2Hf2O7 (T = Dy, Ho, Tm) as well as a single‐component hafnate Nd2Hf2O7, with the aim of preparing thermal barrier coatings with an excellent comprehensive performance. Test results indicate that the high‐entropy compositions have excellent thermal properties. The focus is on elucidating the corrosion process and failure mechanism of CMAS at 1300°C. Moreover, the analysis of residual CMAS and corrosion products was conducted to evaluate the discrepancies in CMAS corrosion behavior among the various compositions. [ABSTRACT FROM AUTHOR]

ABSTRACT Low‐temperature densification of alumina using calcium vanadate (CaV2O6, CV) having a similar dielectric constant as a liquid‐forming additive has been studied. The alumina‒CV composites containing 20‒40 vol.% CV achieve ∼94% of theoretical density at low temperatures of 1100°C‒900°C by liquid‐phase sintering. A reduction in the average size of grains from .87 to .42 µm with a surge in CV amount from 20 to 40 vol.% is observed. The permittivity decreases from 9.2 to 8.90, and the dielectric loss increases from 2.154 × 10‒3 to 4.761 × 10‒3 when the amount of CV in the alumina‒CV composite rises from 20 to 40 vol.%. The temperature coefficient of resonance frequency, thermal expansion coefficient, and thermal conductivity of the alumina‒CV composites are observed in the ranges of ‒54 to ‒72 ppm °C‒1, 6.94‒7.32 ppm °C‒1, and 13.78‒8.02 W m‒1 K‒1, respectively. The compatibility of the composites with Ag for low‐temperature co‐fired ceramics (LTCC) application is established through co‐sintering and energy‐Dispersive X‐ray spectroscopy line spectra analysis. The low‐temperature densification, acceptable range of dielectric and thermal properties, and silver compatibility make the alumina‒CV composite a candidate for LTCC application. [ABSTRACT FROM AUTHOR]

Multiform NiO nanowalls with a high specific surface area were constructed in situ on carbon foam (CF) to construct NiO@CF/OD composite phase change materials (CPCMs). The synthesis mechanism, microstructures, thermal management capability, and photothermal conversion of NiO@CF/OD CPCMs were systematically studied. Additionally, the collaborative enhancement effects of CF and multiform NiO nanowalls on the thermal properties of OD PCMs were also investigated. NiO@CF not only maintains the porous 3D network structure of CF, but also effectively prevents the aggregation of NiO nanosheets. The chemical structures of NiO@CF/OD CPCMs were analyzed using XRD and FTIR spectroscopy. When combined with CF and NiO nanosheets, OD has high compatibility with NiO@CF. The thermal conductivity of NiO@CF/OD-L CPCMs was 1.12 W/m·K, which is 366.7% higher than that of OD. The improvement in thermal conductivity of CPCMs was theoretically analyzed according to the Debye model. NiO@CF/OD-L CPCMs have a photothermal conversion efficiency up to 77.6%. This article provided a theoretical basis for the optimal design and performance prediction of thermal storage materials and systems. [ABSTRACT FROM AUTHOR]

During the machining of Inconel 718 using SiAlON ceramics, the tool life can be significantly influenced by diffusion wear. To investigate this crucial wear behavior, this study focuses on the thermochemical interactions in the diffusion couple between SiAlON ceramics and Inconel 718 superalloy. So, we examine the microstructural characteristics and phase formation behavior in the reacted layer between these two materials. The interfaces between these two materials exhibit distinguishable elemental contrasts and phase formations. Particularly, the phases indicate vitrification or devitrification in the diffusion layer, influenced by the chemical composition. This issue in the diffusion couple was analyzed with thermophysical properties using light flash analysis (LFA). After, it was confirmed that the vitrification of the diffusion layer can be induced by the conduction behavior of heat trapped between SiAlON and Inconel 718 during supercooling. These characterizations verify that the devitrification of the welding layer (diffusion layer), resulting from the reaction between SiAlON ceramics and Inconel 718 superalloy, can depend on the thermal conductivity of the prepared ceramics. Furthermore, we discovered a possibility that this could contribute to improving tool performance by suppressing diffusion wear. [ABSTRACT FROM AUTHOR]

This work addresses the problem of obtaining of Ca 3 Co 4 O 9+δ -based ceramics with enhanced thermoelectric performance. Phase-inhomogeneous layered calcium cobaltite ceramics with cationic nonstoichiometry were prepared by solid-state reactions method and a field assisted sintering technology (FAST). Comprehensive experimental characterizations were conducted on the prepared bulk samples, focusing on their phase composition, as well as thermal (including thermal expansion, thermal diffusivity, and thermal conductivity), electrical (encompassing electrical conductivity and the Seebeck coefficient), and functional properties (such as power factor and figure-of-merit). The FAST technique allowed to obtain ceramics with low porosity and high electrical conductivity, which increased as the Ca:Co ratio within the samples decreased, while sample phase inhomogeneity considerably increased the Seebeck coefficient. The best thermoelectric performance was demonstrated for cationic nonstoichiometric Ca 3 Co 4.4 O 9+δ , which power factor and figure-of-merit values at 825 °C reached 427 μW⋅m−1⋅K−2 and 0.146, respectively. • Ca 3 Co 4 O 9+δ -based ceramics prepared by field assisted sintering technology possessed low porosity and high conductivity. • Electrical conductivity of bulk samples increased at decreasing Ca:Co ratio. • Phase inhomogeneity of prepared ceramics increased the Seebeck coefficient. • Ca 3 Co 4.4 O 9+δ ceramics showed the best thermoelectric performance. [ABSTRACT FROM AUTHOR]

Zintl phases typically exhibit low lattice thermal conductivity, which are extensively investigated as promising thermoelectric candidates. While the significance of Zintl anionic frameworks in electronic transport properties is widely recognized, their roles in thermal transport properties have often been overlooked. This study delves into KCdSb as a representative case, where the [CdSb4/4]− tetrahedrons not only impact charge transfer but also phonon transport. The phonon velocity and mean free path, are heavily influenced by the bonding distance and strength of the Zintl anions Cd and Sb, considering the three acoustic branches arising from their vibrations. Furthermore, the weakly bound Zintl cation K exhibits localized vibration behaviors, resulting in strong coupling between the high‐lying acoustic branch and the low‐lying optical branch, further impeding phonon diffusion. The calculations reveal that grain boundaries also contribute to the low lattice thermal conductivity of KCdSb through medium‐frequency phonon scattering. These combined factors create a glass‐like thermal transport behavior, which is advantageous for improving the thermoelectric merit of zT. Notably, a maximum zT of 0.6 is achieved for K0.84Na0.16CdSb at 712 K. The study offers both intrinsic and extrinsic strategies for developing high‐efficiency thermoelectric Zintl materials with extremely low lattice thermal conductivity. [ABSTRACT FROM AUTHOR]

This paper focuses on investigating the initial-boundary value problem of incompressible heat conducting Navier-Stokes equations with variable coefficients over bounded domains in R 3 , where the viscosity coefficient and heat conduction coefficient are powers of temperature. We obtain the global well-posedness of a strong solution under the assumption that the initial data and the measure of the initial vacuum region are sufficiently small. It is worth mentioning that the initial density is allowed to contain vacuum, and there are no restrictions on the power index of the temperature-dependent viscosity coefficient and heat conductivity coefficient. At the same time, the exponential decay-in-time results are also obtained. [ABSTRACT FROM AUTHOR]

In the present research, the impacts of Ce additions at various concentrations (0, 1.0, 3.4, and 4.0 wt.%) on the evolution of the microstructure, mechanical properties, and thermal conductivity of as-cast and as-extruded Mg-3Sn alloys were investigated. The findings demonstrate that adding Ce caused the creation of a new ternary MgSnCe phase in the magnesium matrix. Some new Mg17Ce2 phases are generated in the microstructure when Ce levels reach 4%. The thermal conductivity of the Mg-3Sn alloy is significantly improved due to Ce addition, and the Mg-3Sn-3.4Ce alloy exhibits the highest thermal conductivity, up to 133.8 W/(m·K) at 298 K. After extrusion, both the thermal conductivity and mechanical properties are further improved. The thermal conductivity perpendicular to the extrusion direction of Mg-3Sn-3.4Ce alloy could achieve 136.28 W/(m·K), and the tensile and yield strengths reach 264.3 MPa and 227.2 MPa, with an elongation of 7.9%. Adding Ce decreases the dissolved Sn atoms and breaks the eutectic α-Mg and Mg2Sn network organization, leading to a considerable increase in the thermal conductivity of as-cast Mg-3Sn alloys. Weakening the deformed grain texture contributed to the further enhancement of the thermal conductivity after extrusion. [ABSTRACT FROM AUTHOR]

Thermal and electrical properties were investigated for five nominally phase‐pure high entropy carbide ceramics. The compositions (Hf0.2Nb0.2Ta0.2Ti0.2Zr0.2)C, (Cr0.2Hf0.2Ta0.2Ti0.2Zr0.2)C, (Hf0.2Mo0.2Ta0.2Ti0.2Zr0.2)C, (Hf0.2Ta0.2Ti0.2W0.2Zr0.2)C, and (Hf0.2Mo0.2Ti0.2W0.2Zr0.2)C were synthesized by carbothermal reduction of oxides. The thermal diffusivity and heat capacity were measured from room temperature to 1800°C. The room temperature thermal conductivity ranged from 5.1 W/mK for (Hf0.2Mo0.2Ti0.2W0.2Zr0.2)C to 9.0 W/mK for (Cr0.2Hf0.2Ta0.2Ti0.2Zr0.2)C. The thermal conductivity increased over the temperature range with maximum conductivities of 19.6 W/mK measured for (Hf0.2Mo0.2Ta0.2Ti0.2Zr0.2)C to 29.7 W/mK for (Cr0.2Hf0.2Ta0.2Ti0.2Zr0.2)C at 1800°C. The electron contribution to thermal conductivity calculated from measured electrical resistivity varied from 41% to 52% of the total thermal conductivity. The tungsten and molybdenum containing compositions had higher phonon contributions while the niobium and chromium containing compositions had nearly equal electron and phonon contributions to thermal conductivity. [ABSTRACT FROM AUTHOR]

High-entropy ceramics have garnered significant attention in recent years owing to their exceptional properties and structural diversity. In this work, single-phase medium/high entropy ceramics, namely (Ca 0.2 Sr 0.4 Ba 0.4)(Zr 0.5 Ti 0.5)O 3 and (Ca 0.2 Sr 0.4 Ba 0.4)(Zr 0.1 Ti 0.9)O 3 , were successfully designed and prepared utilizing Spark Plasma Sintering (SPS). A comprehensive investigation was conducted into the phase structure, microscopic morphology, dielectric properties, and thermal behavior of these ceramics. It was observed that all ceramics maintained a cubic perovskite structure (space group: Pm 3 ‾ m), and the introduction of multi-element doping rendered them more stable across a wide frequency and temperature range. Notably, (Ca 0.2 Sr 0.4 Ba 0.4)(Zr 0.5 Ti 0.5)O 3 exhibited remarkably low dielectric loss (0.0001 at 1 kHz) at room temperature, along with excellent dielectric temperature stability (25–400 °C). By reducing the zirconium concentration in (Ca 0.2 Sr 0.4 Ba 0.4)(Zr 0.1 Ti 0.9)O 3 , a slight decrease in dielectric temperature stability was observed (25–350 °C); however, it demonstrated lower thermal conductivity (0.41 W/(m·K), 1200 °C) and maintained good high-temperature stability. The discovery highlights the promising practicality of both ceramics for high-temperature dielectric applications. [ABSTRACT FROM AUTHOR]

Aluminum nitride (AlN), prized for its high thermal conductivity and electronic insulating properties, finds widespread use in electronic applications, particularly as a substrate material. However, its relatively low fracture toughness limits its application. In this study, to enhance both the thermal and mechanical properties of AlN ceramics, we thoroughly investigate the microstructure, thermal, and mechanical properties of self-reinforced AlN ceramics fabricated by spark plasma sintering, with self-reinforcement achieved through the integration of AlN whiskers within the AlN matrix. Unlike previous studies utilizing conventional pressureless sintering with limited sintering conditions, this work employs spark plasma sintering with a wide range of temperatures (1600–1900 °C) and holding times (10–30 min), providing a comprehensive understanding of the sintering behavior. Microstructural features, observed through optical and scanning electron microscopy, reveal distinct toughening mechanisms via crack deflection and branching, with a maximum 20% enhancement. The self-reinforced AlN ceramics exhibit remarkable improvements in thermal conductivity, reaching up to 150 W m−1 K−1, surpassing reported values for spark plasma-sintered AlN ceramics. Adding AlN whiskers enhances the thermal and mechanical properties of AlN simultaneously, particularly at 1800 °C for 10 min with controlled grain size and nicely integrated AlN whiskers. This work not only contributes valuable insights into the complex relationship between processing parameters, microstructure, and resulting thermal and mechanical properties but also highlights the enhanced thermal and mechanical properties of self-reinforced AlN ceramics. [ABSTRACT FROM AUTHOR]

Ternary half-Heusler (HH) alloys are under intense investigations recently towards achieving high thermoelectric (TE) figure-of-merit (ZT). Of particular interest is the ZrNiPb-based HH alloy, where an optimal value of ZT ~ 0.7 at 773 K has been achieved by co-doping Sn and Bi at Pb site. In this work, we identify an excellent ZT of 1.3 in ZrNi1+xPb0.38Sn0.6Bi0.02 (x = 0.03, at 773 K) composite alloy. This is achieved by synergistic modulation of electronic as well as thermal properties via introduction of minor phase of full-Heusler (FH) in the HH matrix through compositional tuning approach. These Ni-rich ZrNi1+xPb0.38Sn0.6Bi0.02 (0 ≤ x ≤ 0.07) alloys were synthesized via energy efficient and time-curbed techniques that involved Arc melting followed by consolidation via spark plasma sintering. These alloys were characterized by XRD and SEM, which show formation of nanocomposites comprising of HH matrix phase and FH secondary minor phases. Enhancement in ZT is mainly attributed to a synchronized increase in power factor (~42%) and ~25% decrease in its thermal conductivity. Here, TE compatibility factor (S) was also calculated for all samples. The value of |S| ~ 2.7 V−1 (at 773 K) is observed for x = 0.03, which is ~17% higher than bare HH composition (x = 0.0). The theoretically calculated TE device efficiency of best-performing sample ZrNi1.03Pb0.38Sn0.6Bi0.02 is estimated to be η ~ 13.6%. Our results imply that deliberately controlled fine tuning in compositions of HH compounds through compositional tuning approach would lead to novel off-stoichiometric HH phases with enhanced ZT value for efficient TE device fabrication. [ABSTRACT FROM AUTHOR]

This paper presents an experimental and numerical study of the freezing-thawing behavior of water in fully saturated sand. A relatively inexpensive and easily replicable experimental procedure was developed to simulate the freezing-thawing cycles in a medium-sized sand sample placed in a modified commercial freezer. By insulating the sides and bottom of the sample well, while allowing good thermal conductivity at the top of the sample, a nearly vertical advance of the freezing and thawing front was achieved. A series of freeze-thaw cycles were performed with higher and lower temperature gradients. A numerical multiphysics model, assuming an axially symmetric geometry based on the transient heat transfer during the phase transition, used a parametric approach to estimate the effective thermal properties of the sand-water-ice system. A good agreement between experimental and modelling results was shown, but slightly different parameter sets were obtained for each temperature gradient. The presented method could be a simple way to characterize the freeze-thaw process in natural and artificial porous materials. [ABSTRACT FROM AUTHOR]

The energy consumption of buildings presents a significant concern, which has led to a demand for materials with better thermal performance. Thermal conductivity (TC), among the most relevant thermal properties, is essential to address this demand. This study introduces a methodology integrating a Multilayer Perceptron (MLP) and a Generative Adversarial Network (GAN) to predict the TC of concrete based on its mass composition and density. Three scenarios using experimental data from published papers and synthetic data are compared and reveal the model's outstanding performance across training, validation, and test datasets. Notably, the MLP trained on the GAN-augmented dataset outperforms the one with the real dataset, demonstrating remarkable consistency between the model's predictions and the actual values. Achieving an RMSE of 0.0244 and an R2 of 0.9975, these outcomes can offer precise quantitative information and advance energy-efficient materials. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Engineering (17264073) is the property of Republic of Iraq Ministry of Higher Education & Scientific Research (MOHESR) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copper-based powder metallurgy materials are frequently utilized in fabricating brake pads for high-speed trains. The preparation process involves mixing, ball milling, pressing, and sintering. Among these steps, hot-pressed sintering stands out as a rapid and efficient method that significantly influences the properties and performance of the products. In this study, four samples (S700/S750/S800/S850) were prepared using hot-pressed sintering at various temperatures, as follows: 700 °C, 750 °C, 800 °C, and 850 °C. The mechanical and physical properties of the four samples were tested, and the microstructure and compositions were investigated using scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction. The findings highlighted the close relationship between sintering temperature and the mechanical and physical properties of the samples, as it impacts the porosity and interfacial bonding of the particles. Notably, Sample S800 demonstrated superior mechanical and thermal conductivity. Furthermore, the coefficient of friction (COF), friction heat, and wear rate of the four samples were also tested under different braking speeds ranging from 150 km/h to 350 km/h. The results indicated that the COFs of the four samples remained relatively stable below 300 km/h but decreased notably above 300 km/h due to heat fading. Sample S800 displayed consistent and high COF under varied braking speeds and exhibited the lowest wear rate. The observed wear mechanisms included abrasive wear and oxidation wear. Additionally, the friction test results underscored the close correspondence of the COF curve of S800 with the standard of the Ministry of Railways of the People's Republic of China. [ABSTRACT FROM AUTHOR]

Plastic waste management is a complex problem that has negative effects on the environment, society, and the economy. The development of science has made humanity use plastic materials a lot, and because it does not cost to manufacture and is recyclable, it is used in most industries. Plastic contains polyethylene, most of it does not biodegrade and remains in the environment for long periods, and its abundant accumulation leads to many environmental and health hazards to humans. This research, which aims to recycle plastic bags in the field of construction, is of utmost importance in addressing the pressing issue of plastic waste management. The plastic will likely increase the durability of structures mechanically and increase thermal insulation. In this research, the plastic bag segments are integrated in a ratio of 0% to 0.7% in the compressed clay bricks. Which consists of sand, clay, and gypsum. Some physical, mechanical, and thermal properties of the samples are measured. Preliminary results show that the addition of these strips reduces the value of the bulk density between 3.21% to 13%. The speed of sound transmission also decreases between 2.17% and 21%. The stress strength increases between 5.4% to 25.53%. The thermal conductivity value also decreases between 5.26% to 23.68%. This leads to the clay brick becoming lighter, more solid, and better thermal insulation. Thus, we combine the improvement of the properties of clay structures with a significant reduction in environmental impact, inspiring a more sustainable future. [ABSTRACT FROM AUTHOR]

Thermal conductivity of moulding sands is very poorly known. In addition, the study of thermal conductivity variation of moulding sand as a function of its properties is a crucial step in the prediction of moulding defects. So, this study investigates the effects of moisture content, compactibility and permeability of green sand on its thermal conductivity variation, with a specific focus on the combination of bentonite, sand and water for thermal characterization of the transient hot-bridge (THB) method. Three levels of active clay content were selected: 8.1%, 8.98% and 10.03%. For each level of active clay, different mixes were made by varying the amount of added water. Compactibility, permeability and thermal conductivity tests were carried out for each combination of active clay and moisture contents. The experimental results show that thermal conductivity increases with water content and compactibility for different active clay contents, whereas thermal conductivity decreases with permeability, and this variation is highly significant especially for 8.07% of active clay content. [ABSTRACT FROM AUTHOR]

In this paper, a novel composite phase change material (CPCM) is prepared with inorganic PCM through impregnation and dispersion method which can be used for thermal management applications. Inorganic PCMs have high latent heat and good thermal conductivity and are non-flammable, but there exist leakage (shape stability) and corrosion problems. To overcome these issues, a porous structured material is impregnated with the inorganic PCM (disodium hydrogen orthophosphate dodecahydrate). The CPCM is prepared by loading various wt% of expanded graphite and boron nitride nanoparticles with the PCM, and characterization is performed to find the thermal properties and stability. The findings from FTIR and XRD analyses validate both the chemical compatibility and crystalline nature of the samples. DSC thermographs reveal the CPCM5 sample has a latent heat value of 168.05 J/g during the heating process, an encapsulation efficiency of 78.8% and a thermal conductivity of 4.69 W/mK. The thermal stability and resistance to corrosion of the composite samples are also enhanced. The best composite PCM sample is then selected, and subsequently, the thermal performance of the heat sink is experimentally investigated. The thermal performance of rectangular cavity heat sink filled with CPCM5 is the highest for various power sources and temperatures with a maximum enhancement ratio of 6.57. [ABSTRACT FROM AUTHOR]

The effects of Ta doping on the thermal and electrical properties of SnO 2 varistors were researched. The results showed that the thermal conductivity is 2.01 WK−1m−1, the nonlinearity coefficient is 43, and the leakage current density is 0.7 μA/cm2 when the Ta doping level reaches 0.2 mol%. According to the measurement results of the EPR, SEM/EDS, and XRD, the Ta dopant can reduce the oxygen vacancy concentration, which was generated during the sintering. The decline of the oxygen vacancy concentration reduces the phonon scattering, then the thermal conductivity of the varistors is improved. On the other hand, the reduction of the oxygen vacancy concentration elevates the barrier height, so the nonlinearity coefficient is improved and the leakage current density is declined. [ABSTRACT FROM AUTHOR]

In present work, high entropy (MoTaTiVW)C X ceramics with different carbon stoichiometries (X = 3–6) were produced using spark plasma sintering. The microstructure, mechanical properties, and thermal properties of (MoTaTiVW)C X with different carbon stoichiometries were studied. At X = 3, the carbon deficiency resulted in a multiphase structure of the sample, (MoTaTiVW)C 3 with a Mo-rich carbide phase. At X = 3.5, the single-phase rock salt structure was formed despite carbon vacancies of up to 30 %. The relative density of (MoTaTiVW)C X gradually decreases as the carbon stoichiometry increases from X = 3 to X = 6. The concentration of carbon vacancies affects the sintering activation energy, which can enhance mass transfer and promote the densification process. The Vickers hardness of (MoTaTiVW)C X shows an overall decreasing trend as the carbon stoichiometry increases from X = 3.5 to X = 6, peaking at 20.4 ± 0.4 GPa at X = 3.5. The fracture toughness increases and then decreases, peaking at 4.4 ± 0.2 MPa m1/2 at X = 4. The thermal conductivity of (MoTaTiVW)C X gradually increases, then decreases and finally increases with the increase of carbon stoichiometry. At room temperature, the maximum value of thermal conductivity is 6.35 ± 0.29 W/m·K of (MoTaTiVW)C 5 and the minimum value is 5.32 ± 0.35 W/m·K of (MoTaTiVW)C 5.5. At 1000 °C, the thermal conductivity of (MoTaTiVW)C X ranges from 15.94 ± 0.37 W/m·K to 19.56 ± 0.45 W/m·K. As the concentration of carbon vacancies decreases, the decrease in point defect concentration will reduce the degree of lattice distortion, thereby reducing phonon scattering and affecting thermal conductivity. The study suggests that carbon stoichiometry can be used to adjust the microstructure, mechanical properties, and thermal properties of high entropy carbide ceramics. [ABSTRACT FROM AUTHOR]

The strength of zirconium diboride ceramics was tested by three different methods, 3‐point flexure, 4‐point flexure, and compression. Nearly full‐density ceramics were obtained by hot pressing commercial ZrB2 powder with the addition of .5 wt.% carbon as a sintering aid. The thermal properties and hardness were studied for ZrB2 milled with ZrB2 and WC media. Based on phase purity and higher thermal conductivity, ZrB2 ceramics prepared from powders milled with ZrB2 media were selected for mechanical property studies. The strength in 3‐point flexure was 546 ± 55 MPa. The flexure strength was 476 ± 41 MPa in 4‐point bending, which was ∼20% higher than the previously reported value of 398 MPa for ZrB2 with similar grain sizes due to higher relative density and lower impurity contents. Compression testing was performed at room temperature, and the strength was 1110 ± 358 MPa. Finally, the fracture toughness of pure ZrB2 ceramics was determined by the chevron‐notched beam method to be 3.6 ± .7 MPa m1/2. The strength and fracture toughness values are higher than those previously published for ZrB2 ceramics and can be attributed to higher density and lower grain size. The strength‐limiting flaw sizes were comparable to the grain size, suggesting that porosity and impurity phases did not play a significant role in the strength of these ceramics. [ABSTRACT FROM AUTHOR]

In the context of ecological sustainability, this study focuses on the effect of variables of pasture fibers on the thermal properties of slag bricks made from a green recyclable material. This experiment uses slag as the binder, sand as the aggregate, and pasture fiber as an additive. The experimental variables include the additive content ratio of the pasture fiber, the size of the pasture fiber, and the type of pasture fiber. Significance analysis of the experimental results of the thermal performance tests is carried out using Minitab 18.1.0 software, and the optimal ratios for the thermal performance of the composite samples are derived from the response optimizer and conformity analysis. The results of the experiment's test analysis using Minitab 18 software indicate that, with an increase in pasture fiber content, the thermal performance of the composite samples initially decreases before increasing. Additionally, the lower the thermal conductivity of the composite sample, the lower the apparent density and the higher the porosity. Incorporating pasture fibers into slag bricks, as revealed in this study, reduces the waste of pasture resources in pastoral areas and promotes the development of sustainable building materials with favorable thermal properties. [ABSTRACT FROM AUTHOR]

Rare earth silicates are promising environmental/thermal barrier coating (E/TBC) materials facing severe CMAS (CaO‐MgO‐Al2O3‐SiO2) corrosion. Previous studies mainly focused on the intrinsic properties of precorrosion coatings, but there were few studies on their CMAS corrosion products that play a crucial role in the performance of coatings in postservice stage. In this work, the mechanical and thermal properties of nine corrosion products between lutetium silicates and CMAS are studied using first‐principles calculations. Their differences of elastic stiffness are attributed to the different crystal structures and bonding strength. The T:O ratio is identified as a factor of the crystal structure for silicate products, and it has a good correlation with their elastic stiffness. Moreover, the divergences of thermal conductivity are dominated by three essential factors, that is, atomic vibration intensity, lattice vibrational anharmonicity, and complexity of crystal structure. Compared with rare earth silicates, six products, that is, the α‐CaSiO3, β‐CaSiO3, Ca2MgSi2O7, Ca2Al2SiO7, CaAl2Si2O8, and Ca2Lu8(SiO4)6O2, showing good damage tolerance and low thermal conductivities, are predicted to be advantageous to E/TBCs. These discoveries reveal the mechanical/thermal properties of corrosion products between lutetium silicates and CMAS and are expected to support the future researches on the performance of E/TBC in the postservice stage. [ABSTRACT FROM AUTHOR]

Context: Traditional conductive adhesives based on epoxy resin system often encounter problems such as high brittleness and low heat resistance. Therefore, it is particularly important to improve the thermal and mechanical properties of the conductive adhesive. In this study, the effects of SWCNT-Ag and SWCNT fillers on the thermal properties of DGEBA/DETA/Ag conductive adhesive system were studied by using molecular dynamics to construct different cross-linking models. The final results show that the addition of SWCNT and SWCNT-Ag can significantly improve the thermal properties of the conductive adhesive. However, the nanosilver particles on the surface of SWCNT-Ag act as a bridge for the connection between SWCNT and Ag in the conductive adhesive. Therefore, SWCNT-Ag has a more positive impact on the thermal properties of DGEBA/DETA/Ag conductive adhesive system. Methods: In this paper, the influence of SWCNT-Ag on the thermal properties of traditional DGEBA/DETA/Ag conductive adhesive system was studied by using Materials Studio software. The volume shrinkage, glass transition temperature, thermal expansion coefficient, and thermal conductivity of the material were calculated based on COMPASS force field. The thermal conductivity is calculated by using reverse non-equilibrium molecular dynamics method. Finally, it is found that SWCNT-Ag has a positive effect on the thermal properties of the conductive adhesive system by comparing several groups of calculation data. [ABSTRACT FROM AUTHOR]

Gadolinium Zirconate nanoparticles were synthesized by Co-precipitation and Ball milling techniques. In this study, the effect of the synthesis technique and calcination temperature on the structural, morphological and thermal properties were investigated. The thermal properties examined showed that the GZ nanoparticles obtained from CP technique suffered two-fold weight loss as compared to BM technique. The SEM results revealed the formation of agglomerated particles. However, TEM results confirms the formation of nanoparticles of 10.5 nm and 8 nm by BM and CP techniques respectively. GZ particles obtained through CP technique showed better uniformity of particle size over BM technique. The functional groups of the nanoparticle were studied using FT-IR spectroscopy analysis. The XRD results confirm the formation of defect-fluorite structure and pyrochlore structure for the samples calcined at 1100 °C and 1400 °C (BM) respectively. The formation of the corresponding structures was further confirmed by Raman Spectroscopy. The thermal conductivity of the nanoparticle produced by ball milling and co-precipitation technique is almost same. As compared to NiCrAlY and uncoated substrate materials, the micro hardness of the GZ coatings has the maximum hardness of 594.6 HV, indicating the improved hardness behavior of TBC system. [ABSTRACT FROM AUTHOR]

Cubic boron nitride (cBN) has been used as a tool material for several decades due to its high hardness and thermal stability. Various binders are commonly added to cBN to synthesise cBN composites for better cutting performance. However, most studies have only investigated properties such as hardness and bulk modulus, without comprehensively studying elastic properties through experiments. In this study, the sound velocities and elastic properties of cBN with AlN binder were determined by using the ultrasonic interferometry technique. The bulk and shear moduli with their pressure dependence were determined as B 0 = 351 (3) GPa, G 0 = 344 (3) GPa, B 0 ′ = 4.32 (4) and G 0 ′ = 1.74 (2) using the finite strain equation-of-state approaches. Elasticity-related thermal properties, such as Debye temperature, Grüneisen parameter, thermal conductivity and coefficient of thermal expansion were also estimated. The results show that the elastic properties of the cBN composite with vol. 8.8% AlN-binder are comparable to the pure cBN compact. Additionally, the thermal conductivity and coefficient of thermal expansion have little effect on cBN composite with AlN binder compared to pure cBN. [ABSTRACT FROM AUTHOR]

Research into lightweight structural concrete using volcanic tuff is of great importance to the construction industry. These materials have excellent thermal insulation properties, which helps improve the energy efficiency of buildings. A three-factor experimental design was used to build the statistical model. The test methods used were methods for determining the crushability of volcanic tuff, determining the average density, compressive strength and thermal conductivity of lightweight structural concrete. The influence of basalt fiber on the properties of lightweight structural concrete has been determined. The optimal compositions of lightweight structural concrete using tuff have been selected. The compressive strength of lightweight structural concrete reached 32.0 MPa. The average density range is 1754.6–2114.0 kg/m3. Good thermal conductivity values were obtained in the range of 0.653–0.818 W/m·K. The article obtained the optimal compositions of lightweight structural concrete using volcanic tuff as a filler. [ABSTRACT FROM AUTHOR]

The miniaturization and high-power density of modern electronic devices pose significant thermal management issues, particularly affecting their performance and lifetime. Ladder-like polysilsesquioxanes (LPSQs) offer a promising solution due to their remarkable thermal, mechanical, and chemical properties. By incorporating thermally conductive fillers, LPSQ composites can achieve high thermal conductivity (TC), making them ideal for thermal management in advanced electronic applications. In this study, LPSQ-based nanocomposites containing functionalized alumina nanoparticles were prepared by solution casting and UV curing, and the effects of varying amounts of Irgacure-184 photoinitiator on their structural and thermal properties were investigated. Three sets of samples were prepared with a fixed amount of LPSQs, 80 wt.% of nanoparticles, and 1, 5, or 10 wt.% of photoinitiator with respect to the matrix. TC was evaluated from the measured values of heat capacity, density, and thermal diffusivity. TC values increased by 60%, 71.2%, and 93.1% for the three samples, respectively, compared to the neat matrix. Results indicate that an intermediate amount of photoinitiator (5%) preserved LPSQs' structural integrity, namely the presence of long linear silsesquioxane chains, and provided good filler dispersion and distribution, high polymerization degree, thermal stability, and high TC. [ABSTRACT FROM AUTHOR]