Comparative study on the synthesis and characterization of Gd2Zr2O7 nanoparticles by mechanical milling and Co-precipitation techniques.

Gadolinium Zirconate nanoparticles were synthesized by Co-precipitation and Ball milling techniques. In this study, the effect of the synthesis technique and calcination temperature on the structural, morphological and thermal properties were investigated. The thermal properties examined showed that the GZ nanoparticles obtained from CP technique suffered two-fold weight loss as compared to BM technique. The SEM results revealed the formation of agglomerated particles. However, TEM results confirms the formation of nanoparticles of 10.5 nm and 8 nm by BM and CP techniques respectively. GZ particles obtained through CP technique showed better uniformity of particle size over BM technique. The functional groups of the nanoparticle were studied using FT-IR spectroscopy analysis. The XRD results confirm the formation of defect-fluorite structure and pyrochlore structure for the samples calcined at 1100 °C and 1400 °C (BM) respectively. The formation of the corresponding structures was further confirmed by Raman Spectroscopy. The thermal conductivity of the nanoparticle produced by ball milling and co-precipitation technique is almost same. As compared to NiCrAlY and uncoated substrate materials, the micro hardness of the GZ coatings has the maximum hardness of 594.6 HV, indicating the improved hardness behavior of TBC system. [ABSTRACT FROM AUTHOR]