Mechanical and thermal properties for corrosion products of lutetium silicates against CMAS.

Rare earth silicates are promising environmental/thermal barrier coating (E/TBC) materials facing severe CMAS (CaO‐MgO‐Al2O3‐SiO2) corrosion. Previous studies mainly focused on the intrinsic properties of precorrosion coatings, but there were few studies on their CMAS corrosion products that play a crucial role in the performance of coatings in postservice stage. In this work, the mechanical and thermal properties of nine corrosion products between lutetium silicates and CMAS are studied using first‐principles calculations. Their differences of elastic stiffness are attributed to the different crystal structures and bonding strength. The T:O ratio is identified as a factor of the crystal structure for silicate products, and it has a good correlation with their elastic stiffness. Moreover, the divergences of thermal conductivity are dominated by three essential factors, that is, atomic vibration intensity, lattice vibrational anharmonicity, and complexity of crystal structure. Compared with rare earth silicates, six products, that is, the α‐CaSiO3, β‐CaSiO3, Ca2MgSi2O7, Ca2Al2SiO7, CaAl2Si2O8, and Ca2Lu8(SiO4)6O2, showing good damage tolerance and low thermal conductivities, are predicted to be advantageous to E/TBCs. These discoveries reveal the mechanical/thermal properties of corrosion products between lutetium silicates and CMAS and are expected to support the future researches on the performance of E/TBC in the postservice stage. [ABSTRACT FROM AUTHOR]