Search

Climate change and population growth play crucial roles in the planning of future water resources management strategies. In this paper, a balancing between projected water resources and water demands in the Iraqi Part of the Tigris River Basin (TRB) was evaluated till the year 2080 based on RCPs 2.6, 4.5 and 8.5 and population growth. This paper examined a sustainable adaptation plan of water resources in the TRB considering three scenarios; (S1) as no change in the current strategy, (S2) as improved irrigation efficiency and (S3) as improved irrigation and municipal water use efficiency. The results showed a decline in streamflow will occur in the range from 5 to 18.4% under RCP 2.6 and RCP 8.5, respectively. The minimum increase in water demand is expected for RCP 2.6 (maximum increase for RCP 8.5) by 51.8 (208.2), 9.9 (42) and 1.2 (7)% for the municipal–industrial, irrigation and environmental water demands, respectively, compared with the RP. The main finding indicated that S1 is the worst scenario, with water stress in four provinces, especially on the warmest RCP. Whereas, under S2 and S3 conditions, water stress can be eliminated. Increasing ambition towards adaptation becomes obligatory for developing sustainable water sources, supporting water food securities and increasing resilience towards climate change. [ABSTRACT FROM AUTHOR]

Big-medical-data classification and image detection are crucial tasks in the field of healthcare, as they can assist with diagnosis, treatment planning, and disease monitoring. Logistic regression and YOLOv4 are popular algorithms that can be used for these tasks. However, these techniques have limitations and performance issue with big medical data. In this study, we presented a robust approach for big-medical-data classification and image detection using logistic regression and YOLOv4, respectively. To improve the performance of these algorithms, we proposed the use of advanced parallel k-means pre-processing, a clustering technique that identified patterns and structures in the data. Additionally, we leveraged the acceleration capabilities of a neural engine processor to further enhance the speed and efficiency of our approach. We evaluated our approach on several large medical datasets and showed that it could accurately classify large amounts of medical data and detect medical images. Our results demonstrated that the combination of advanced parallel k-means pre-processing, and the neural engine processor resulted in a significant improvement in the performance of logistic regression and YOLOv4, making them more reliable for use in medical applications. This new approach offers a promising solution for medical data classification and image detection and may have significant implications for the field of healthcare. [ABSTRACT FROM AUTHOR]

Clustering is one of the most significant applications in the big data field. However, using the clustering technique with big data requires an ample amount of processing power and resources due to the complexity and resulting increment in the clustering time. Therefore, many techniques have been implemented to improve the performance of the clustering algorithms, especially for k-means clustering. In this paper, the neural-processor-based k-means clustering technique is proposed to cluster big data by accumulating the advantage of dedicated machine learning processors of mobile devices. The solution was designed to be run with a single-instruction machine processor that exists in the mobile device's processor. Running the k-means clustering in a distributed scheme run based on mobile machine learning efficiently can handle the big data clustering over the network. The results showed that using a neural engine processor on a mobile smartphone device can maximize the speed of the clustering algorithm, which shows an improvement in the performance of the cluttering up to two-times faster compared with traditional laptop/desktop processors. Furthermore, the number of iterations that are required to obtain (k) clusters was improved up to two-times faster than parallel and distributed k-means. [ABSTRACT FROM AUTHOR]

An increasing interest has recently been shown to use chitin/chitosan oligomers (chito-oligomers) in medicine and food fields because they are not only water-soluble, nontoxic, and biocompatible materials, but they also exhibit numerous biological properties, including antibacterial, antifungal, and antitumor activities, as well as immuno-enhancing effects on animals. Conventional depolymerization methods of chitosan to chito-oligomers are either chemical by acid-hydrolysis under harsh conditions or by enzymatic degradation. In this work, hydrolysis of chitosan to chito-oligomers has been achieved by applying adsorption-separation technique using diluted HCl in the presence of different types of zeolite as adsorbents. The chito-oligomers were retrieved from adsorbents and characterized by differential scanning calorimetry (DSC), liquid chromatography/mass spectroscopy (LC/MS), and ninhydrin test. [ABSTRACT FROM AUTHOR]

Despite the numerous uses of chitin and chitosan as new functional materials of high potential in various fields, they are still behind several directly compressible excipients already dominating pharmaceutical applications. There are, however, new attempts to exploit chitin and chitosan in co-processing techniques that provide a product with potential to act as a direct compression (DC) excipient. This review outlines the compression properties of chitin and chitosan in the context of DC pharmaceutical applications. [ABSTRACT FROM AUTHOR]

This study aimed to assess the spatiotemporal sensitivity of the net irrigation water requirement (NIWR) to changes in climate, for sixteen crops widely cultivated in four irrigation projects located in arid and semi-arid regions of Iraq. Using LARS-WG and five GCMs, the minimum and maximum temperature and precipitation were projected for three periods from 2021–2080 with 20-year steps (P1, P2, and P3) under representative concentration pathways (RCPs) 2.6, 4.5, and 8.5. Weather data available for a reference period from 1990–2019 in four representatives' meteorological stations were used. The climate variables and other required data were inserted into the CROPWAT 8 NIWR tool. Findings revealed that the increase in the NIWR for the considered crops due to climate change falls in the range 0.1–42.4%, 1.8–44.5%, 1.2–25.1%, and 0.7–14.7% for the North Jazeera Irrigation Project (NJIP), Kirkuk Irrigation Project (KRIP), Upper Khalis Irrigation Project (UKIP), and Dalmaj Irri-gation Project (DLIP), respectively. Barley is more susceptible to changes in climate, whereas maize, potato, soybean, and millet are found to withstand changes in climate better than others. The novel outcomes of this study support optimal spatiotemporal allocation of irrigation water requirement and the sustainable management of water resources in a changing climate in arid and semi-arid regions. [ABSTRACT FROM AUTHOR]

The function of packaging is crucial in the maintenance of fresh meat product quality. This study aimed to assess the efficiency of six films added with coatings 2379L/220 and 2379L/221 (containing sage extracts) to inhibit Salmonella typhimurium, Staphylococcus aureus, and Escherichia coli, which showed that two of the six films had a significant effect. Additionally, the effects of the films on refrigerated skinless chicken breast meat were evaluated based on microbiological content, colour, weight loss, texture and pH. Four of the six films were examined could extend the storability of refrigerated chicken breast fillets for up to seven days. All six treated films improved the pH, colour stability, weight loss, and texture of the chicken fillets. Therefore, these findings suggested that the coatings containing sage extracts having different viscosities (2379L/220 and 2379L/221) were effective as antimicrobial adhesives in food packaging films and can be commercially applied in prolonging the storage of chicken breast meat without affecting their quality. [ABSTRACT FROM AUTHOR]

Conocarpus fiber is an abundantly available and sustainable cellulosic biomass. With its richness in cellulose content, it is potentially used for manufacturing microcrystalline cellulose (MCC), a cellulose derivative product with versatile industrial applications. In this work, different samples of bleached fiber (CPBLH), alkali-treated fiber (CPAKL), and acid-treated fiber (CPMCC) were produced from Conocarpus through integrated chemical process of bleaching, alkaline cooking, and acid hydrolysis, respectively. Characterizations of samples were carried out with Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDX), Fourier Transform Infrared-Ray (FTIR), X-ray Diffraction (XRD), Thermogravimetric (TGA), and Differential Scanning Calorimetry (DSC). From morphology study, the bundle fiber feature of CPBLH disintegrated into micro-size fibrils of CPMCC, showing the amorphous compounds were substantially removed through chemical depolymerization. Meanwhile, the elemental analysis also proved that the traces of impurities such as cations and anions were successfully eliminated from CPMCC. The CPMCC also gave a considerably high yield of 27%, which endowed it with great sustainability in acting as alternative biomass for MCC production. Physicochemical analysis revealed the existence of crystalline cellulose domain in CPMCC had contributed it 75.7% crystallinity. In thermal analysis, CPMCC had stable decomposition behavior comparing to CPBLH and CPAKL fibers. Therefore, Conocarpus fiber could be a promising candidate for extracting MCC with excellent properties in the future. [ABSTRACT FROM AUTHOR]

Simple Summary: Half of all colorectal cancer (CRC) patients develop metastasis, despite current management. The aim of this study was to help guide precision medicine in metastatic CRC patients, by performing genomic characterisation of primary CRC and metastatic tumours, and revealing the effects of therapy on the metastatic process. We confirmed common ancestry between paired primary CRC and metastatic tumours, with most metastases seemingly having disseminated late (after acquiring most genomic diversity) from their corresponding primary tumour, via either a single clone (monoclonal spread) or multiple clones (polyclonal spread). Treatment prompted the selection for distinct resistant clones, through monoclonal seeding to distant metastatic sites. Overall, this study supports the importance of early clinical detection and surgical removal of the CRC tumour, whilst further highlighting the challenges for treating and managing metastatic CRC with increased intratumour heterogeneity (either due to early dissemination or metastatic spread through multiple clones) and the underlying risk of future therapeutic resistance in treated patients. Colorectal cancer (CRC) is the third most frequently diagnosed cancer worldwide, where ~50% of patients develop metastasis, despite current improved management. Genomic characterisation of metastatic CRC, and elucidating the effects of therapy on the metastatic process, are essential to help guide precision medicine. Multi-region whole-exome sequencing was performed on 191 sampled tumour regions of patient-matched therapy-naïve and treated CRC primary tumours (n = 92 tumour regions) and metastases (n = 99 tumour regions), in 30 patients. Somatic variants were analysed to define the origin, composition, and timing of seeding in the metastatic progression of therapy-naïve and treated metastatic CRC. High concordance, with few genomic differences, was observed between primary CRC and metastases. Most cases supported a late dissemination model, via either monoclonal or polyclonal seeding. Polyclonal seeding appeared more common in therapy-naïve metastases than in treated metastases. Whereby, treatment prompted for the selection of distinct resistant clones, through monoclonal seeding to distant metastatic sites. Overall, this study reinforces the importance of early clinical detection and surgical excision of the CRC tumour, whilst further highlighting the clinical challenges for metastatic CRC with increased intratumour heterogeneity (either due to early dissemination or polyclonal metastatic spread) and the underlying risk of future therapeutic resistance in treated patients. [ABSTRACT FROM AUTHOR]

Bioceramics are class of biomaterials that are specially developed for application in tissue engineering and regenerative medicines. Sol-gel method used for producing bioactive and reactive bioceramic materials more than those synthesized by traditional methods. In the present research study, the effect of polyethylene glycol (PEG) on Ca5(PO4)2SiO4 (CPS) bioceramics was investigated. The addition of 5% and 10% PEG significantly affected the porosity and bioactivity of sol-gel derived Ca5(PO4)2SiO4. The morphology and physicochemical properties of pure and modified materials were evaluated using scanning electron microscopy (SEM), X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and Fourier-transform infrared spectroscopy (FTIR), respectively. The effect of PEG on the surface area and porosity of Ca5(PO4)2SiO4 was measured by Brunauer–Emmett–Teller (BET). The results obtained from XRD and FTIR studies confirmed the interactions between PEG and CPS. Due to the high concentration of PEG, the CPS-3 sample showed the largest-sized particle with an average of 200.53 µm. The porous structure of CPS-2 and CPS-3 revealed that they have a better ability to generate an appetite layer on the surface of the sample when immersed in simulated body fluid (SBF) for seven days. The generation of appetite layer showed the bioactive nature of CPS which makes it a suitable material for hard tissue engineering applications. The results have shown that the PEG-modified porous CPS could be a more effective material for drug delivery, implant coatings and other tissue engineering applications. The aim of this research work is to fabricate SBF treated and porous polyethylene glycol-modified Ca5(PO4)2SiO4 material. SBF treatment and porosity of material can provide a very useful target for bioactivity and drug delivery applications in the future. [ABSTRACT FROM AUTHOR]

An innovative, biomimetic, green synthesis approach was exploited for the synthesis of humane and environmental friendly nanomaterials for biomedical applications. Ultrafine bonelike apatite (BAp) 2D plate-like structures were prepared using fenugreek seed extract during the biosynthesis wet-chemical precipitation route. The chemical analysis, morphology and structure of the prepared 2D nanoplates were characterized by inductively coupled plasma atomic emission spectroscopy (ICP-OES), electron microscopy (SEM and TEM), X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. A 2D plate-like nanostructure of BAp with an average width (length) of 12.67 ± 2 nm and thickness of 3.8 ± 1.2 nm was obtained. BAp 2D crystals were tuned by interaction with the fenugreek organic molecules during the fabrication process. In addition to Ca and P ions, bone mineral sources such as K, Mg, Na, SO4 and CO3 ions were incorporated into BAp nanoplates using fenugreek seed extract. The overall organic molecule concentration in the reaction process increased the effectiveness of hydroxyl groups as nucleation sites for BAp crystals. Accordingly, the size of the biosynthesized BAp plate-like structure was reduced to its lowest value. Biosynthesis BAp 2D plate-like nanocrystals showed good viability and higher growth of MC3T3 osteoblast-like structures than that of the control sample. BAp 2D nanoplates prepared by a facile, ecofriendly and cost-effective approach could be considered a favorable osteoconductive inorganic biomaterial for bone regeneration applications. [ABSTRACT FROM AUTHOR]

We investigated the detection of chloroform (CHCl3) using ZnO nanoclusters via density functional theory calculations. The effects of various concentrations of CHCl3, as well as the deposition of O atoms, on the adsorption over ZnO nanoclusters were analyzed via geometric optimizations. The calculated difference between the highest occupied molecular orbital and the lowest unoccupied molecular orbital for ZnO was 4.02 eV. The most stable adsorption characteristics were investigated with respect to the adsorption energy, frontier orbitals, elemental positions, and charge transfer. The results revealed that ZnO nanoclusters with a specific geometry and composition are promising candidates for chloroform-sensing applications. [ABSTRACT FROM AUTHOR]

According to the survey on various health centres, smart log-based multi access physical monitoring system determines the health conditions of humans and their associated problems present in their lifestyle. At present, deficiency in significant nutrients leads to deterioration of organs, which creates various health problems, particularly for infants, children, and adults. Due to the importance of a multi access physical monitoring system, children and adolescents' physical activities should be continuously monitored for eliminating difficulties in their life using a smart environment system. Nowadays, in real-time necessity on multi access physical monitoring systems, information requirements and the effective diagnosis of health condition is the challenging task in practice. In this research, wearable smart-log patch with Internet of Things (IoT) sensors has been designed and developed with multimedia technology. Further, the data computation in that smart-log patch has been analysed using edge computing on Bayesian deep learning network (EC-BDLN), which helps to infer and identify various physical data collected from the humans in an accurate manner to monitor their physical activities. Then, the efficiency of this wearable IoT system with multimedia technology is evaluated using experimental results and discussed in terms of accuracy, efficiency, mean residual error, delay, and less energy consumption. This state-of-the-art smart-log patch is considered as one of evolutionary research in health checking of multi access physical monitoring systems with multimedia technology. [ABSTRACT FROM AUTHOR]

Herein, MoS2-ZnO heterostructure nanorods were hydrothermally synthesized and characterized in detail using several compositional, optical, and morphological techniques. The comprehensive characterizations show that the synthesized MoS2/ZnO heterostructure nanorods were composed of wurtzite hexagonal phase of ZnO and rhombohedral phase of MoS2. The synthesized MoS2/ZnO heterostructure nanorods were used as a potent photocatalyst for the decomposition of methylene blue (MB) dye under natural sunlight. The prepared MoS2/ZnO heterostructure nanorods exhibited ~97% removal of MB in the reaction time of 20 min with the catalyst amount of 0.15 g/L. The kinetic study revealed that the photocatalytic removal of MB was found to be in accordance with pseudo first-order reaction kinetics with an obtained rate constant of 0.16262 min−1. The tremendous photocatalytic performance of MoS2-ZnO heterostructure nanorods could be accredited to an effective charge transportation and inhibition in the recombination of photo-excited charge carriers at an interfacial heterojunction. The contribution of active species towards the decomposition of MB using MoS2-ZnO heterostructure nanorods was confirmed from scavenger study and terephthalic acid fluorescence technique. [ABSTRACT FROM AUTHOR]

Currently, polymethylmethacrylate (PMMA) is the most popular denture base material. Most fractures of dentures that occur during function are due to its insufficient mechanical strength. The major drawbacks of PMMA are insufficient ductility, strength, and viscoelastic behavior. The purpose of this study was to evaluate a polymethylmethacrylate denture base material modified with TiO2 nanoparticles in terms of nanomechanical, creep-recovery, and relaxation. Additionally, the effects of addition TiO2 nanoparticles on the thermal and antimicrobial adhesion behaviors were investigated. Differential scanning calorimetry and thermogravimetric analysis indicated that the effect of small amounts of TiO2 nanoparticles (1 wt. %, 2 wt. %, and 3 wt. %) on the degradation behavior of PMMA denture bases was insignificant. The nanomechanical test results of the PMMA and PMMA/TiO2 nanocomposites indicated that the hardness and modulus in the nanoscale range improved due to TiO2 addition. At a 1200-nm penetration depth, the modulus increased by 10%, 16%, and 29% and hardness increased by 18%, 24%, and 35% with the addition of 1 wt. %, 2 wt. %, and 3 wt. % TiO2, respectively. Furthermore, the creep-recovery and relaxation behaviors of PMMA were significantly improved due to the addition of TiO2. The creep strain decreased from 1.41% to 1.06%, 0.66%, and 0.49% with the addition of 1 wt. %, 2 wt. %, and 3 wt. % TiO2, respectively. The relaxation test results showed that the initial stress under 1% strain improved to 19.9, 21.2, and 22 MPa with the addition of 1 wt. %, 2 wt. %, and 3 wt. % TiO2, respectively. The improvement in the nanohardness, modulus, creep recovery, and relaxation behavior of PMMA due to the addition of TiO2 nanoparticles indicated the role of the nanoparticles in increasing the PMMA matrix stiffness by reducing its mobility and free volume. TiO2 nanoparticles also improved the antimicrobial behavior of PMMA by significantly reducing bacterial adherence with increasing TiO2 ratio. [ABSTRACT FROM AUTHOR]

The aim of this study is to compare the creep/recovery behavior of bulk-fill dental composites after storage in various food simulating organic solvents. For this purpose, five different resin-composites (four bulk-fills and one conventional) were used. A total of 20 rectangular specimens (14 mm × 3 mm × 0.7 mm) were prepared by filling the resin-composites in Teflon mold. All of the specimens for each material (n = 5) were divided into four groups namely dry (control), distilled water (DW), artificial saliva, and absolute ethanol. The specimens were subjected to three-point bending creep test during immersion directly. A constant load of 2 N was used for each specimen with loading and unloading time 2 h each. Results: SF2 and XF showed a lower creep strain % after immersion, ranging from 0.44 (dry) to 0.75 (saliva) and 0.43 (dry) to 0.80 (ethanol), respectively. TNC BF depicts the maximum creep strain % ranging from 1.24% (dry) to 2.87% (ethanol) followed by FBF ranging from 1.17 (dry) to 2.59 (ethanol). However, the conventional material (GR) showed lower creep strain after immersion ranging from 0.28 to 0.54. Moreover, SF2 resulted in the highest creep recovery in all of the composites groups, as well as conventional material. The other composite groups showed lower creep recovery as compared to the conventional material (GR). The creep strain % for all the bulk-fill composites materials were increased during immersion in the liquids. However, for the conventional material, the creep deformation is decreased after immersion. SF2 showed the highest percentage of creep recovery among the bulk-fill composites, followed by XF. [ABSTRACT FROM AUTHOR]

In this study, porous polyethylene scaffolds were examined as bone substitutes in vitro and in vivo in critical-sized calvarial bone defects in transgenic Sprague-Dawley rats. A microscopic examination revealed that the pores appeared to be interconnected across the material, making them suitable for cell growth. The creep recovery behavior of porous polyethylene at different loads indicated that the creep strain had two main portions. In both portions, strain increased with increased applied load and temperature. In terms of the thermographic behavior of the material, remarkable changes in melting temperature and heat fusion were revealed with increased the heating rates. The tensile strength results showed that the material was sensitive to the strain rate and that there was adequate mechanical strength to support cell growth. The in vitro cell culture results showed that human bone marrow mesenchymal stem cells attached to the porous polyethylene scaffold. Calcium sulfate–hydroxyapatite (CS–HA) coating of the scaffold not only improved attachment but also increased the proliferation of human bone marrow mesenchymal stem cells. In vivo, histological analysis showed that the study groups had active bone remodeling at the border of the defect. Bone regeneration at the border was also evident, which confirmed that the polyethylene acted as an osteoconductive bone graft. Furthermore, bone formation inside the pores of the coated polyethylene was also noted, which would enhance the process of osteointegration. [ABSTRACT FROM AUTHOR]

Syzgium cumini (L.) Skeels powder ( S. cumini powder), also known as Jamun, is well-known for its various medical and health benefits. It is especially recognized for its antidiabetic and antioxidant properties. Thus, S. cumini powder is used in various industries, such as the food and cosmetic industries. In this work, the fruit of S. cumini was utilized; its seeds were extracted, dried, and ground into powder. The ground powders were subjected to various techniques such as physicochemical tests, Fourier transform infrared (FTIR) spectroscopy, X-ray diffractometry (XRD), particle size analysis, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and antioxidant analysis. From the physicochemical tests, it was revealed that the jamun seed filler contained cellulose (43.28%), hemicellulose (19.88%), lignin (23.28%), pectin (12.58%), and wax (0.98%). The FTIR analysis supported these results. For instance, a peak at 2889 cm -1 was observed and associated with CH stretching, typically found in methyl and methylene groups, characteristic of cellulose and hemicellulose structures. The XRD results demonstrated that the crystallinity index of the jamun seed filler was 42.63%. The particle analysis indicated that the mean (average) particle size was 25.34 μm. This observation was ensured with SEM results. The EDX spectrum results showed the elemental composition of the fillers. Regarding thermal degradation, the jamun seed filler had the ability to withstand temperatures of up to 316.5 °C. Furthermore, endothermic and exothermic peaks were observed at 305 °C and 400 °C, respectively. Furthermore, the antioxidant property of the powder displayed a peak scavenging activity of 91.4%. This comprehensive study not only underscores the viability of S. cumini powder as a sustainable and effective particulate filler in polymer composites but also demonstrates its potential to enhance the mechanical properties of composites, thereby offering significant implications for the development of eco-friendly materials in various industrial applications.

Hepatocellular carcinoma (HCC) is a worldwide health issue. Epigenetic alterations play a crucial role in HCC tumorigenesis. Using epigenetic modulators for HCC treatment confers a promising therapeutic effect. The aim of this study was to explore the effect of a decitabine (DAC) and vorinostat (VOR) combination on the crosstalk between apoptosis and autophagy in the HCC HepG2 cell line at 24 h and 72 h. Median inhibitory concentrations (IC 50 s) of VOR and DAC were assessed in the HepG2 cell line. The activity of caspase-3 was evaluated colorimetrically, and Cyclin D1(CCND1), Bcl-2, ATG5, ATG7, and P62 levels were assessed using ELISA at different time intervals (24 h and 72 h), while LC3IIB and Beclin-1 gene expression were measured by using qRT-PCR. The synergistic effect of VOR and DAC was confirmed due to the observed combination indices (CIs) and dose reduction indices (DRIs). The combined treatment with both drugs inhibited the proliferation marker (CCND1), and enhanced apoptosis compared with each drug alone at 24 h and 72 h ( via active caspase-3 upregulation and Bcl-2 downregulation). Moreover, the combination induced autophagy as an early event via upregulation of Beclin-1 , LC3IIB , ATG5, and ATG7 gene expression. The initial induction of autophagy started to decrease after 72 h due to Beclin-1 downregulation, and there was decreased expression of LC3IIB compared with the value at 24 h. Herein, epigenetic modulation via the VOR/DAC combination showed an antitumor effect through the coordination of an autophagy-apoptosis crosstalk and promotion of autophagy-induced apoptosis, which ultimately led to the cellular death of HCC cancer cells.

Ovarian cancer is the eighth-most common cancer in women and has the highest rate of death among all gynecological malignancies in the Western world. Increasing evidence shows that miRNAs are connected to the progression of ovarian cancer. In the current study, we focus on the identification of miRNA and its associated genes that are responsible for the early prognosis of patients with ovarian cancer. The microarray dataset GSE119055 used in this study was retrieved via the publicly available GEO database by NCBI for the analysis of DEGs. The miRNA GSE119055 dataset includes six ovarian carcinoma samples along with three healthy/primary samples. In our study, DEM analysis of ovarian carcinoma and healthy subjects was performed using R Software to transform and normalize all transcriptomic data along with packages from Bioconductor. Results: We identified miRNA and its associated hub genes from the samples of ovarian cancer. We discovered the top five upregulated miRNAs (hsa-miR-130b-3p, hsa-miR-18a-5p, hsa-miR-182-5p, hsa-miR-187-3p, and hsa-miR-378a-3p) and the top five downregulated miRNAs (hsa-miR-501-3p, hsa-miR-4324, hsa-miR-500a-3p, hsa-miR-1271-5p, and hsa-miR-660-5p) from the network and their associated genes, which include seven common genes (SCN2A, BCL2, MAF, ZNF532, CADM1, ELAVL2, and ESRRG) that were considered hub genes for the downregulated network. Similarly, for upregulated miRNAs we found two hub genes (PRKACB and TAOK1).

Viscosity, speed of sound ( u ), and density ( ρ ) have been measured in aqueous glycyl glycine solution over a temperature range from 293.15 to 313.15 K with a 5 K interlude to evaluate the volumetric and compressibility properties of bio-surfactants, namely sodium cholate (NaC; 1-20 mmol∙kg -1 ) and sodium deoxycholate (NaDC; 1-10 mmol∙kg -1 ). Density and viscosity findings provide information on both solute-solute and solute-solvent types of interactions. Many other metrics, such as apparent molar adiabatic compression (κS,φ), isentropic compressibility (κS), and apparent molar volume (Vφ), have been calculated from speed of sound and density measurements, utilising experimental data. The results show that the zwitterionic end group in the glycyl glycine strongly interacts with NaDC and NaC, promoting its micellization. Since the addition of glycyl glycine causes the bio-surfactant molecules to lose their hydrophobic hydration, the observed concentration-dependent changes in apparent molar volume and apparent molar adiabatic compression are likely attributable to changes in water-water interactions. Viscous relaxation time (τ) increases significantly with a rise in bio-surfactant concentration and decreases with increasing temperature, which may be because of structural relaxation processes resulting from molecular rearrangement. All of the estimated parameters have been analysed for their trends with regard to the different patterns of intermolecular interaction present in an aqueous glycyl glycine solution and bio-surfactant system.

This study aims to understand how glycyl dipeptide affected the compressibility, volumetric behavior and viscometric behavior of the cationic surfactants CTAB (Cetyltrimethylammonium bromide) and DTAB (dodecyltrimethylammonium bromide). Information on solute-solute, solute-solvent, and solvent-solvent interactions has been inferred using the quantification of density ( ρ ), speed of sound ( u ) and viscosity in aqueous media containing glycyl dipeptide in the temperature range 293.15-313.15 K at an interval of 5 K. The data from the aforementioned research have been used to enumerate numerous volumetric and compressibility metrics that aid in the collection of information about the interactional behavior of the system under consideration. The study suggests that CTAB interacts strongly compared to DTAB with dipeptide, and it also significantly dehydrates glycyl dipeptide. The difference in water-water interactions caused by the loss of hydrophobic hydration of the surfactant molecules upon the addition of cationic surfactants may be the cause of the variation in determined parameters with surfactant concentration. Consideration of the structural rearrangement of molecules that may occur in the system has been used to explain the results of viscosity and computed factors related to viscosity. The patterns of competitive intermolecular interactions in the ternary (dipeptide + water + surfactant) system have been used to analyze the trends of all the parameters. The study may be helpful to understand the stability and structural changes in protein-surfactant systems mediated through various interactions that may be present in the system., Competing Interests: The authors declare no conflict of interest.

The present work deals with the micellar state study of sodium cholate and sodium deoxycholate in the aqueous solution of a bioactive peptide, namely glycyl dipeptide, having different concentrations through conductivity and fluorescence methods at different temperatures. The data obtained from conductivity is plotted against the concentration of Bile salts, and CMC (critical micelle concentration) values are calculated. The results realized have been elucidated with reference to Glycyl dipeptide-bile salts hydrophobic/hydrophilic interactions existing in solution. In addition, the CMC values converted to mole fraction (Xcmc) values have been used to evaluate the standard thermodynamic factors of micellization viz., enthalpy H, free energy ΔGm0, and entropy (ΔSm0) which extract information regarding thermodynamic feasibility of micellar state, energy alteration, and the assorted interactions established in the existing (bile salts-water-glycyl dipeptide) system. Furthermore, the pyrene fluorescence spectrum has also been utilized to study the change in micro polarity induced by the interactions of bile salts with glycyl dipeptide and the aggregation action of bile salts. The decrease in modification in the ratio of intensities of first and third peaks i.e., (I 1 /I 3 ) for the pyrene molecules in aqueous bile salts solution by the addition of dipeptide, demonstrates that the micelle polarity is affected by glycyl dipeptide. This ratio has also been utilized to determine CMC values for the studied system, and the results have been found to be in good correlation with observations made in conductivity studies.

New bio-composite nanofibers composed of polyethylene oxide (PEO)/silk fibroin (SF)/barium titanate (BaTiO 3 ) are introduced in this study. The SF solution was added to the PEO solution to form a PEO/SF blend with different weight percentages (5, 10, 15, 20 wt.%). The PEO/15 wt.% SF blend was selected to continue the experimental plan based on the optimum nanofiber morphology. Different wt.% of BaTiO 3 particles (0.2, 0.4, 0.8, 1 wt.%) were added to the PEO/15 wt.% SF blend solution, and the suspensions obtained were introduced to an electrospinning device. The fabricated tissue was characterized by scanning electron microscope (SEM), X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectroscopy. The zeta potential of the solution and the piezoelectric performance of the fabricated tissue were characterized. A newly designed pizoTester was used to investigate piezoelectric properties. The results showed that a well-organized, smooth PEO/15 wt.% SF/0.2 wt.% BaTiO 3 nanofiber composite with low bead contents was obtained. Improved properties and electrical coupling were achieved in the newly introduced material. Electrospun PEO/15 wt.% SF/0.2 wt.% BaTiO 3 mats increased the output voltage (1150 mV) compared to pristine PEO and PEO/SF composite fibers (410 and 290 mV, respectively) upon applying 20 N force at 5 Hz frequency. The observed enhancement in piezoelectric properties suggests that the prepared composite could be a promising material in cardiac tissue engineering (CTE).

The main objective of this work is to develop a variety of hybrid high-density polyethylene (HDPE) micro- and nanocomposites and to investigate their thermal, mechanical, and morphological characteristics as a function of number of fillers and their contents percentage. In this study, 21 formulations of the composites were prepared using fillers with different sizes including micro fillers such as talc, calcium carbonate (CaCO 3 ), as well as nano-filler (fumed silica (FS)) though the melt blending technique. The morphological, mechanical, and thermal properties of the composite samples were evaluated. The morphological study revealed negligible filler agglomerates, good matrix-filler interfacial bonding in case of combined both CaCO 3 and FS into the composites. Sequentially, improvements in tensile, flexural and Izod impact strengths as a function of fillers loading in the HDPE matrix have been reported. The maximum enhancement (%) of tensile, flexural and impact strengths were 127%, 86% and 16.6%, respectively, for composites containing 25% CaCO 3 and 1% FS without any inclusion of talc filler; this indicates that the types/nature, size, quantity and dispersion status of fillers are playing a major role in the mechanical properties of the prepared composites more than the number of the used fillers.

The aqueous Cu(0)-mediated reversible deactivation radical polymerization (RDRP) of triblock copolymers with two block sequences at 0.0 °C is reported herein. Well-defined triblock copolymers initiated from PHEAA or PDMA, containing (A) 2-hydroxyethyl acrylamide (HEAA), (B) N-isopropylacrylamide (NIPAM) and (C) N, N-dimethylacrylamide (DMA), were synthesized. The ultrafast one-pot synthesis of sequence-controlled triblock copolymers via iterative sequential monomer addition after full conversion, without any purification steps throughout the monomer additions, was performed. The narrow dispersities of the triblock copolymers proved the high degree of end-group fidelity of the starting macroinitiator and the absence of any significant undesirable side reactions. Controlled chain length and extremely narrow molecular weight distributions (dispersity ~1.10) were achieved, and quantitative conversion was attained in as little as 52 min. The full disproportionation of CuBr in the presence of Me 6 TREN in water prior to both monomer and initiator addition was crucially exploited to produce a well-defined ABC-type triblock copolymer. In addition, the undesirable side reaction that could influence the living nature of the system was investigated. The ability to incorporate several functional monomers without affecting the living nature of the polymerization proves the versatility of this approach.

This study reports the feasible use of chitosan as a thin film biosensor on the very sensitive quartz crystal micro balance system for detection of blends of multiple templates within a single matrix. The development of chitosan-based thin film materials with selectivity for nicotine derivatives is described. The molecular imprinting of a combination of nicotine derivatives in N-diacryloyl pipiradine-chitosan-methacrylic acid copolymer films on quartz crystal resonators was used to generate thin films with selectivity for nicotine and a range of nicotine analogues, particularly 3-phenylpyridine. The polymers were characterized by spectroscopic and microscopic evaluations; surface area, pore size, pore volume using Breuner-Emmet-Teller method. Temperature characteristics were also studied. The swelling and structure consistency of the Chitosan was achieved by grafting with methylmethacrylic acid and cross-linking with N-diacrylol pipiradine. A blend of 0.002 g (0.04 mmol) of Chitosan, 8.5 μL Methylmethacrylic Acid and 1.0 mg N-diacrylol pipradine (BAP) presented the best blend formulation. Detections were made within a time interval of 99 s, and blend templates were detected at a concentration of 0.5 mM from the Quartz crystal microbalance resonator analysis. The successful crosslinking of the biopolymers ensured successful control of the swelling and agglomeration of the chitosan, giving it the utility potential for use as thin film sensor. This successful crosslinking also created successful dual multiple templating on the chitosan matrix, even for aerosolized templates. The products can be used in environments with temperature ranges between 60 °C and 250 °C.

Date palm fiber ( Phoenix dactylifera L.) is a natural biopolymer rich in lignocellulosic components. Its high cellulose content lends them to the extraction of tiny particles like microcrystalline cellulose (MCC) and nanocrystalline cellulose (NCC). These cellulose-derived small size particles can be used as an alternative biomaterial in wide fields of application due to their renewability and sustainability. In the present work, NCC (A) and NCC (B) were isolated from date palm MCC at 60 min and 90 min hydrolysis times, respectively. The isolated NCC product was subjected to characterization to study their properties differences. With the hydrolysis treatment, the yields of produced NCC could be attained at between 22% and 25%. The infrared-ray functional analysis also revealed the isolated NCC possessed a highly exposed cellulose compartment with minimized lignoresidues of lignin and hemicellulose. From morphology evaluation, the nanoparticles' size was decreased gradually from NCC (A) (7.51 nm width, 139.91 nm length) to NCC (B) (4.34 nm width, 111.51 nm length) as a result of fragmentation into cellulose fibrils. The crystallinity index was found increasing from NCC (A) to NCC (B). With 90 min hydrolysis time, NCC (B) showed the highest crystallinity index of 71% due to its great cellulose rigidity. For thermal analysis, NCC (B) also exhibited stable heat resistance, in associating with its highly crystalline cellulose structure. In conclusion, the NCC isolated from date palm MCC would be a promising biomaterial for various applications such as biomedical and food packaging applications.

In this work, copper-mediated reversible deactivation radical polymerization (RDRP) of homo-polyacrylamides was conducted in aqueous solutions at 0.0 °C. Various degrees of polymerization (DP = 20, 40, 60, and 80) of well-defined water-soluble homopolymers were targeted. In the absence of any significant undesirable side reactions, the dispersity of polydiethylacrylamide (PDEA) and polydimethylacrylamide (PDMA) was narrow under controlled polymerization conditions. To accelerate the polymerization rate, disproportionation of copper bromide in the presence of a suitable ligand was performed prior to polymerization. Full conversion of the monomer was confirmed by nuclear magnetic resonance (NMR) analysis. Additionally, the linear evolution of the polymeric chains was established by narrow molecular weight distributions (MWDs). The values of theoretical and experimental number average molecular weights (Mn) were calculated, revealing a good matching and robustness of the system. The effect of decreasing the reaction temperature on the rate of polymerization was also investigated. At temperatures lower than 0.0 °C, the controlled polymerization and the rate of the process were not affected.

Current work aims to study the mechanical and dynamical mechanical properties of non-woven bamboo (B)/woven kenaf (K)/epoxy (E) hybrid composites filled with nanoclay. The nanoclay-filled BK/E hybrid composites were prepared by dispersing 1 wt.% nanoclay (organically-modified montmorillonite (MMT; OMMT), montmorillonite (MMT), and halloysite nanotube (HNT)) with high shear speed homogenizer followed by hand lay-up fabrication technique. The effect of adding nanoclay on the tensile, flexural, and impact properties of the hybrid nanocomposites were studied. Fractography of tensile-fractured sample of hybrid composites was studied by field emission scanning electron microscope. The dynamic mechanical analyzer was used to study the viscoelastic properties of the hybrid nanocomposites. BK/E-OMMT exhibit enhanced mechanical properties compared to the other hybrid nanocomposites, with tensile, flexural, and impact strength values of 55.82 MPa, 105 MPa, and 65.68 J/m, respectively. Statistical analysis and grouping information were performed by one-way ANOVA (analysis of variance) and Tukey method, and it corroborates that the mechanical properties of the nanoclay-filled hybrid nanocomposites are statistically significant. The storage modulus of the hybrid nanocomposites was improved by 98.4%, 41.5%, and 21.7% with the addition of OMMT, MMT, and HNT, respectively. Morphology of the tensile fracture BK/E-OMMT composites shows that lesser voids, microcracks and fibers pull out due to strong fiber-matrix adhesion compared to other hybrid composites. Hence, the OMMT-filled BK/E hybrid nanocomposites can be utilized for load-bearing structure applications, such as floor panels and seatbacks, whereby lightweight and high strength are the main requirements.

Bacterial leaf blight caused by Xanthomonas oryzae pv. oryzae (Xoo) is one of the most devastating diseases, resulting in significant yield losses in rice. The extensive use of chemical antibacterial agents has led to an increase the environmental toxicity. Nanotechnology products are being developed as a promising alternative to control plant disease with low environmental impact. In the present study, we investigated the antibacterial activity of biosynthesized chitosan nanoparticles (CSNPs) and zinc oxide nanoparticles (ZnONPs) against rice pathogen Xoo. The formation of CSNPs and ZnONPs in the reaction mixture was confirmed by using UV-vis spectroscopy at 300-550 nm. Moreover, CSNPs and ZnONPs with strong antibacterial activity against Xoo were further characterized by scanning and transmission electron microscopy, Fourier-transform infrared spectroscopy, and X-ray diffraction. Compared with the corresponding chitosan and ZnO alone, CSNPs and ZnONPs showed greater inhibition in the growth of Xoo, which may be mainly attributed to the reduction in biofilm formation and swimming, cell membrane damage, reactive oxygen species production, and apoptosis of bacterial cells. Overall, this study revealed that the two biosynthesized nanoparticles, particularly CSNPs, are a promising alternative to control rice bacterial disease.

Herein, MoS₂-ZnO heterostructure nanorods were hydrothermally synthesized and characterized in detail using several compositional, optical, and morphological techniques. The comprehensive characterizations show that the synthesized MoS₂/ZnO heterostructure nanorods were composed of wurtzite hexagonal phase of ZnO and rhombohedral phase of MoS₂. The synthesized MoS₂/ZnO heterostructure nanorods were used as a potent photocatalyst for the decomposition of methylene blue (MB) dye under natural sunlight. The prepared MoS₂/ZnO heterostructure nanorods exhibited ~97% removal of MB in the reaction time of 20 min with the catalyst amount of 0.15 g/L. The kinetic study revealed that the photocatalytic removal of MB was found to be in accordance with pseudo first-order reaction kinetics with an obtained rate constant of 0.16262 min -1 . The tremendous photocatalytic performance of MoS₂-ZnO heterostructure nanorods could be accredited to an effective charge transportation and inhibition in the recombination of photo-excited charge carriers at an interfacial heterojunction. The contribution of active species towards the decomposition of MB using MoS₂-ZnO heterostructure nanorods was confirmed from scavenger study and terephthalic acid fluorescence technique.