Search

Invasive species can be particularly disruptive when they intersect with organisms of conservation concern. Stabilizing the declining eastern migratory population of monarch butterflies (Danaus plexippus) is projected to require extensive habitat restoration across multiple land use sectors including metropolitan areas. Numerous conservation programs encourage urban citizens to plant gardens with milkweeds, the obligate larval host plants of the monarch. Here, we show that predation by Polistes dominula, an invasive paper wasp that is particularly abundant in urban settings, can turn such sites into ecological traps for monarch larvae. Polistes dominula was the predominant paper wasp seen foraging in central Kentucky pollinator gardens. In 120 observed encounters with monarch larvae on milkweeds in gardens, most second to fourth instars were killed, whereas most fifth instars escaped by thrashing or dropping. The wasps bit and carried off second instars whole, whereas third and fourth instar kills were first gutted, then processed and carried away piecemeal. Predation on sentinel larvae was much higher in urban gardens than in rural settings. The wasps exploited ornamental butterfly “hibernation boxes” in pollinator gardens as nesting habitat. Polistes dominula is an under-recognized predator that may diminish the urban sector’s contributions to monarch habitat restoration.

The gut microbiota is recognized as having major impact in health and disease. Sample storage is an important aspect to obtain reliable results. Mostly recommended is immediate freezing, however, this is not always feasible. Faecal occult blood test (FOBT) papers are an appealing solution in such situations, and most studies find these to be applicable, showing no major changes within 7 days storage at room temperature (RT). As fieldwork often requires RT storage for longer periods, evaluation of this is warranted. We performed 16S rRNA gene sequencing of 19 paired faecal samples immediately frozen or kept five weeks and five months at RT on FOBT papers. Alpha-diversity evaluation revealed no effect of FOBT storage, and evaluation of beta-diversity showed that host explained 65% of community variation, while storage method explained 5%. Evaluation of community dispersion and the Firmicutes/Bacteroidetes ratio revealed a larger effect of storage time for fresh-frozen samples. Single taxa evaluation (order-to-genus level) showed significant alterations of four (of 37) genera after five weeks and five genera after five months. When comparing the two timepoints, alterations were only detectable for fresh-frozen samples. Our findings reveal that long term storage on FOBT papers is an applicable approach for microbiota research.

In this study, polyacrylic acid modified filter paper (FP/PAA) was synthesized by in-situ polymerization of acrylic acid, which was used as a matrix to chelate nano-scale zero valent iron (nZVI). The loading content of nZVI in the filter paper reached 24.8%. The fabricated composite FP/PAA/nZVI was characterized by SEM, FT-IR and TGA respectively. Moreover, it was used for the removal of methyl blue and methylene blue as model anionic and cationic dyes. The effect of initial dye concentration on decolorization efficiency was investigated. The results showed that FP/PAA/nZVI enhanced the removal of dye from the simulated dye wastewater and the decolorization efficiency exceeded 95% for the dye solutions lower than 20 mg/L. More importantly, the filter paper supported nZVI realized the continuous treatment of simulated dye wastewater by a simple filtration process. This study hopes to serve as a basis for the application of nZVI in textile wastewater treatment.

Metal oxides based graphene nanocomposites were used for ammonia vapour sensing. The self-assembly process was adopted to prepare freestanding flexible pure rGO, CeO2-rGO and SnO2-rGO composite papers. The structural studies confirmed the formation of rGO composite papers. The ammonia vapor sensing was demonstrated using an impedance analyzer at different humidity levels as well as concentration. The CeO2-rGO composite paper achieved a sensitivity of 51.70 ± 1.2%, which was higher than that of pure rGO and SnO2-rGO composite paper. Both the surfaces (top and bottom) of the papers are active in efficiently sensing ammonia, which makes the present work unique. The results reveal that metal oxide/rGO papers can be effectively utilized in real time sensor application.

Here, we follow the stable propagation of a roughening crack using simultaneously Digital Image Correlation and Infra-Red imaging. In a quasi-two-dimensional paper sample, the crack tip and ahead of that the fracture process zone follow the slowly, diffusively moving “hot spot” ahead of the tip. This also holds when the crack starts to roughen during propagation. The well-established intermittency of the crack advancement and the roughening of the crack in paper are thus subject to the dissipation and decohesion in the hot spot zone. They are therefore not only a result of the depinning of the crack in a heterogeneous material.

Nowadays, due to environmental pollution and natural energy consumption caused by waste paper, many researches are being conducted on the reuse of printed-paper. To recycle the paper, de-inking has to be performed. In this article, in order to reduce the use of the commonly used de-inking chemicals, the effect of an atmospheric pressure helium plasma treatment on the de-inking enhancement of printed-paper is studied. Through colorimeter and UV-visible spectrometer measurements the plasma treatment is shown to speed up the de-inking. While SEM observations and FTIR measurements suggest that the paper quality is retained upon plasma treatment, the increase of surface hydrophilicity measured by water contact angle measurements, compared to non-treated paper, is believed to enhance the fiber swelling of the paper and lead to a faster ink removal.

We present a rapid (

The amount of Paper Board Mill Effluent Treatment Plant Sludge (PBM-ETPS) dumped from paper mills are huge and its conversion into hydrochar for the purpose of energy has broad prospects. This study investigated the optimum conditions for the production of PBM-ETPS derived hydrochar (PBM-ETPSH) through Reponse Surface Methodology (RSM) for more surface area and pore volume with minimal hydrogen to carbon (H/C) and oxygen to carbon (O/C) ratios. The PBM-ETPSH had higher heating value (HHV) of 18.39 MJ kg−1 with fixed carbon percentage of 15.6. Our results showed a reduction in H/C (35.05%) and O/C (43.7%) ratios confirming the coalification of optimized PBM-ETPSH. Thermogravimetric investigations of blending PBM-ETPSH with coal in 1:1 ratio increased its HHV to 22.25 MJ kg−1 making it suitable as an energy alternative for paper mills.

Paper Spray Ionization (PSI) is commonly applied for the analysis of small molecules, including drugs, metabolites, and pesticides in biological fluids, due to its high versatility, simplicity, and low costs. In this study, a new setup called Solvent Assisted Paper Spray Ionization (SAPSI), able to increase data acquisition time, signal stability, and repeatability, is proposed to overcome common PSI drawbacks. The setup relies on an integrated solution to provide ionization potential and constant solvent flow to the paper tip. Specifically, the ion source was connected to the instrument fluidics along with the voltage supply systems, ensuring a close control over the ionization conditions. SAPSI was successfully applied for the analysis of different classes of biomolecules: amyloidogenic peptides, proteins, and N-glycans. The prolonged analysis time allowed real-time monitoring of processes taking places on the paper tip, such as amyloid peptides aggregation and disaggregation phenomena. The enhanced signal stability allowed to discriminate protein species characterized by different post translational modifications and adducts with electrophilic compounds, both in aqueous solutions and in biofluids, such as serum and cerebrospinal fluid, without any sample pretreatment. In the next future, application to clinical relevant modifications, could lead to the development of quick and cost-effective diagnostic tools.

Paper degradation on a macroscopic scale is characterised primarily by yellowing, an increase in brittleness, and other destructive changes caused by the hydrolysis of glycoside bonds and oxidation reactions. Until now, lignin has been believed to cause these changes. However, contemporary analysis has not confirmed this assumption and has attributed low paper resistance to ageing with acidification owing to the production in acid environments that involve aluminium sulfate. In view of the common belief this manuscript presents studies on the accelerated ageing of papers with different lignin contents that are produced in neutral environments. To achieve the objective, artificially aged papers under conditions of increased humidity and temperature were investigated using chromatographic (SEC) and spectroscopic (FTIR and UV–Vis spectroscopy) techniques. Mechanical tests were used to determine the decrease in tensile properties of the samples. We observed no effects of the lignin content on the ageing rate of paper produced at neutral pH. This work also reveals the extent to which spectroscopic methods are useful for studying the papers containing lignin.

Point-of-care testing (POCT) for uropathogen detection and chemical screening has great benefits for the diagnosis of urinary tract infections (UTIs). The goal of this study was to develop a portable and inexpensive paper-based analytical device (PAD) for cultivating bacteria in situ and rapidly testing for nitrite on the same device. The PAD was fabricated using a wax printing technique to create a pattern on Whatman No. 1 filter paper, which was then combined with a cotton sheet to support bacterial growth. Nitrite detection was based on the principle of the Griess reaction, and a linear detection range of 0–1.6 mg/dL (R2 = 0.989) was obtained. Scanning electron microscopy (SEM) analysis demonstrated that the bacteria were able to grow and formed a cluster on the cellulose fibres within 2 hours. The enzyme β-glucuronidase, which is specifically produced by Escherichia coli, was able to convert the pre-immobilized 5-bromo-4-chloro-3-indolyl-β-D-glucuronide sodium salt (X-GlcA), a colourless substrate, generating a blue colour. Under optimum conditions, the proposed device allowed bacterial concentrations in the range of 104–107 colony forming units (CFU)/mL to be quantified within 6 hours. Moreover, the use of this device enables the identification of E. coli pathogens with selectivity in real urine samples. In conclusion, the PAD developed in this study for UTI screening provides a rapid, cost-effective diagnostic method for use in remote areas.

As a two-dimensional material, graphene has attracted increasing attention as heat dissipation material owing to its excellent thermal transport property. In this work, we fabricated sisal nanocrystalline cellulose/functionalized graphene papers (NPGs) with high thermal conductivity by vacuum-assisted self-assembly method. The papers exhibit in-plane thermal conductivity as high as 21.05 W m−1 K−1 with a thermal conductivity enhancement of 403% from the pure cellulose paper. The good thermal transport properties of NPGs are attributed to the strong hydrogen-bonding interaction between nanocrystalline cellulose and functionalized graphene and the well alignment structure of NPGs.

Microfluidic paper-based analytical devices (microPADs) are emerging as cost-effective and portable platforms for point-of-care assays. A fundamental limitation of microPAD fabrication is the imprecise nature of most methods for patterning paper. The present work demonstrates that paper patterned via wax printing can be miniaturized by treating it with periodate to produce higher-resolution, high-fidelity microPADs. The optimal miniaturization parameters were determined by immersing microPADs in various concentrations of aqueous sodium periodate (NaIO4) for varying lengths of time. This treatment miniaturized microPADs by up to 80% in surface area, depending on the concentration of periodate and length of the reaction time. By immersing microPADs in 0.5-M NaIO4 for 48 hours, devices were miniaturized by 78% in surface area, and this treatment allowed for the fabrication of functional channels with widths as small as 301 µm and hydrophobic barriers with widths as small as 387 µm. The miniaturized devices were shown to be compatible with redox-based colorimetric assays and enzymatic reactions. This miniaturization technique provides a new option for fabricating sub-millimeter-sized features in paper-based fluidic devices without requiring specialized equipment and could enable new capabilities and applications for microPADs.

Throughout the last decade, the expansion of food testing has been gradually moving towards ordinary high throughput screening methods performed on-site. The demand for point-of-care testing, able to distinguish molecular signatures with high accuracy, sensitivity and specificity has been significantly increasing. This new requirement relies on the on-site detection and monitorization of molecular signatures suitable for the surveillance of food production and processing. The widespread use of antibiotics has contributed to disease control of livestock but has also created problems for the dairy industry and consumers. Its therapeutic and subtherapeutic use has increased the risk of contamination in milk in enough concentrations to cause economic losses to the dairy industry and have a health impact in highly sensitive individuals. This study focuses on the development of a simple Surface-Enhanced Raman Spectroscopy (SERS) method for fast high throughput screening of tetracycline (TET) in milk. For this, we integrate a paper-based low-cost, fully recyclable and highly stable SERS platform, with a minimal sample preparation protocol. A two-microliter sample of milk solutions spiked with TET (from 0.01 to 1000 ppm) is dried on a silver nanoparticle coated cardboard substrate and measured via a Raman spectrophotometer. The SERS substrate showed to be extremely stable with a shelf life of several months. A global spectrum principal component analysis approach was used to test all the detected vibrational modes and their correlation with TET concentration. Peak intensity ratios (455 cm−1/1280 cm−1 and 874 cm−1/1397 cm−1) were found to be correlated with TET concentrations in milk, achieving a sensitivity as low as 0.1 ppm. Results indicate that this SERS method combined with portable Raman spectrometer is a potential tool that can be used on-site for the monitoring of TET residues and other antibiotics.

This work presents a cost-effective, label-free in point-of-care (POC) biosensor for the sensitive detection of 8-hydroxy-2′-deoxyguanosine (8-OHdG), the most abundant oxidative product of DNA, that may allow a premature assessment of cancer disease, thereby improving diagnosis, prognostics and survival rates. The device targets the direct detection of 8-OHdG by using for the first time a carbon-ink 3-electrode on a paper substrate coupled to Differential Pulse Voltammetry readings. This design was optimized by adding nanostructured carbon materials to the ink and the conducting polymer PEDOT, enhancing the electrocatalytic properties of the sensor towards 8-OHdG detection. Meanwhile, the ability of this oxidative stress biomarker to undertake an oxidation reaction enabled the development of the sensing electrochemical device without the need of chemical probes and long incubation periods. This paper-modified sensor presented high electrochemical performance on the oxidation of 8-OHdG with a wide linear range (50–1000 ng/ml) and a low detection limit (14.4 ng/ml). Thus, our results showed the development of a direct and facile sensor with good reproducibility, stability, sensitivity and more importantly, selectivity. The proposed carbon-based electrochemical sensor is a potential candidate to be miniaturized to small portable size, which make it applicable for in-situ 8-OHdG sensing in real biological samples.

Paper-based microfluidic devices have many applications in biomedical and environmental analysis. However, the process of prototyping device designs can be tedious, error-prone, and time-consuming. Here, we present a cross-platform, open-source software tool—AutoPAD—developed to quickly create and modify device designs and provide a free alternative to commercial design software. The capabilities that we designed to be inherent to AutoPAD (e.g., automatic zone alignment and design refactoring) highlight its potential use in nearly any paper-based microfluidic device application and for creating nearly any desired design, which we demonstrate through the recreation of numerous device designs from the literature.

We present a simple all-in-one paper-based sensor for E. coli detection using a composite ink made of a fluorogenic DNAzyme probe for bacterial recognition and signal generation, lysozyme that lyses whole bacterial cells, and pullulan/trehalose sugars that stabilize printed bioactive molecules. The paper sensor is capable of producing a fluorescence signal as a readout within 5 minutes upon contacting E. coli, can achieve a limit of detection of 100 cells/mL, in a variety of sample matrixes, without sample enrichment, and remains stable for at least 6 months when stored at ambient temperature. Therefore, this simple paper sensor provides rapid bacterial testing on site, and can be shipped and stored under ambient conditions to benefit users living in resource-limited regions.

For the first time, a paper-based fluorescence resonance energy transfer (FRET) determination with cyclic AMP (cAMP)-specific phosphodiesterase 4B (PDE4B) inhibitory assay using an inkjet-printing technique is proposed. Non-fabricated parchment paper is found to constitute a unique substrate to measure fluorescent energy transfer, due to its insignificant self-absorption, and enables efficient sample interaction. Here, we report the responsive FRET signals generated on paper, upon sequentially printing reaction components on parchment paper using a conventional inkjet printer equipped with four cartridges. After printing, the energy emitted by Eu chelate was transferred by FRET to ULight molecule on paper, detected at 665 nm. In the absence of free cAMP, a maximum FRET signal was achieved on paper, while a decrease in FRET signals was recorded when free cAMP produced by PDE4B inhibitors compete with Eu-cAMP, binding with ULight-mAb. The IM50 value was determined as 2.46 × 10−13 mole for roliparm and 1.86 × 10−13 mole for roflumilast, to effectively inhibit PDE4B activity. Inkjet printing-based FRET signal determination utilizes components that are less than the femtomole range, which was four-orders less than the standard assay method. The methodology reported here constitutes an innovative approach towards the determination of FRET signals generated on paper.

Paper has been pursued as an interesting substrate material for sensors in applications such as microfluidics, bio-sensing of analytes and printed microelectronics. It offers advantages of being inexpensive, lightweight, environmentally friendly and easy to use. However, currently available paper-based mechanical sensors suffer from inadequate range and accuracy. Here, using the principle of supercapacitive sensing, we fabricate force sensors from paper with ultra-high sensitivity and unprecedented configurability. The high sensitivity comes from the sensitive dependence of a supercapacitor’s response on the contact area between a deformable electrolyte and a pair of electrodes. As a key component, we develop highly deformable electrolytes by coating ionic gel on paper substrates which can be cut and shaped into complex three-dimensional geometries. Paper dissolves in the ionic gel after determining the shape of the electrolytes, leaving behind transparent electrolytes with micro-structured fissures responsible for their high deformability. Exploiting this simple paper-based fabrication process, we construct diverse sensors of different configurations that can measure not just force but also its normal and shear components. The new sensors have range and sensitivity several orders of magnitude higher than traditional MEMS capacitive sensors, in spite of their being easily fabricated from paper with no cleanroom facilities.

Spatially uniform reconstitution of dried reagents is critical to the function of paper microfluidic devices. Advancing fluid fronts in paper microfluidic devices drive (convect) and concentrate rehydrated reagents to the edges, causing steep chemical gradients and imperfect mixing. This largely unsolved problem in paper microfluidics is exacerbated by increasing device dimensions. In this article, we demonstrate that mixing of dried reagents with a rehydrating fluid in paper microfluidics may be significantly enhanced by stacking paper layers having different wicking rates. Compared to single-layer paper membranes, stacking reduced the “non-reactive area”, i.e. area in which the reconstituted reagents did not interact with the rehydrating fluid, by as much as 97% in large (8 cm × 2 cm) paper membranes. A paper stack was designed to collect ~0.9 ml liquid sample and uniformly mix it with dried reagents. Applications of this technology are demonstrated in two areas: (i) collection and dry storage of sputum samples for tuberculosis testing, and (ii) salivary glucose detection using an enzymatic assay and colorimetric readout. Maximizing the interaction of liquids with dried reagents is central to enhancing the performance of all paper microfluidic devices; this technique is therefore likely to find important applications in paper microfluidics.

3D printed and paper-based microfluidics are promising formats for applications that require portable miniaturized fluid handling such as point-of-care testing. These two formats deployed in isolation, however, have inherent limitations that hamper their capabilities and versatility. Here, we present the convergence of 3D printed and paper formats into hybrid devices that overcome many of these limitations, while capitalizing on their respective strengths. Hybrid channels were fabricated with no specialized equipment except a commercial 3D printer. Finger-operated reservoirs and valves capable of fully-reversible dispensation and actuation were designed for intuitive operation without equipment or training. Components were then integrated into a versatile multicomponent device capable of dynamic fluid pathing. These results are an early demonstration of how 3D printed and paper microfluidics can be hybridized into versatile lab-on-chip devices.

Peaches are known for their palatable flavor and abundant nutrients. However, peaches are perishable, and the existing preservation techniques for peaches are still immature. To further extend the shelf life and prevent nutrient loss of perishable peaches under ambient temperature in summer (approximately 25–32 °C), we conducted experiments wrapping peaches (Prunus persica cv ‘Baihua’) in single- and composite-treated vegetal fibrous papers that contained calcium carbonate, phytic acid, Na-alginate and vitamin C. The pathogenic fungi that primarily caused peach decay during storage belonged to the genera of Penicillium, Botrytis, Aspergillus, Alternaria, and Rhizopus. After analyzing quality attributes, including weight loss, firmness, soluble sugar content, respiration rate, relative electric conductivity, malonaldehyde content, peroxidase activity and the decay index, we proved that vitamin C within the preservative paper greatly contributes to peach preservation. Combined with phytic acid and Na-alginate, the composite vitamin C preservative papers played significant roles in delaying fruit senescence, and 0.4% (w/v) vitamin C preservative paper with 1% Na-alginate could maintain quality and extend shelf life with the best effect. This preservation technique significantly postponed the respiration peak by 2–3 days and is a significant contribution to contemporary commercial production.

Triboelectric nanogenerators (TENGs) offer an emerging market of self-sufficient power sources, converting the mechanical energy of the environment to electricity. Recently reported high power densities for the TENGs provide new applications opportunities, such as self-powered sensors. Here in this research, a flexible graphene oxide (GO) paper was fabricated through a straightforward method and utilized as the electrode of TENGs. Outstanding power density as high as 1.3 W.m−2, an open-circuit voltage up to 870 V, and a current density of 1.4 µA.cm−2 has been extracted in vertical contact-separation mode. The all-flexible TENG has been employed as a self-powered humidity sensor to investigate the effect of raising humidity on the output voltage and current by applying mechanical agitation in two forms of using a tapping device and finger tapping. Due to the presence of superficial functional groups on the GO paper, water molecules are inclined to be adsorbed, resulting in a considerable reduction in both generated voltage (from 144 V to 14 V) and current (from 23 µA to 3.7 µA) within the range of relative humidity of 20% to 99%. These results provide a promising applicability of the first suggested sensitive self-powered GO TENG humidity sensor in portable/wearable electronics.

In offset printing process, poor mechanical properties and printability of paper substrate usually result in printing problems, low quality of print and waste of paper materials. Therefore, many researches focus on the quality improvement of paper substrates using suitable additives. In this work, N-methylated chitosan, including N, N-dimethyl chitosan (DMC) and N, N, N-trimethyl chitosan (TMC), were prepared and employed as coating agents to ameliorate the mechanical properties and printability of paper sheets. Analysis results showed that the mechanical strength of coated papers with DMC and TMC were largely improved, because the fibers with negative charges were prone to form electrostatic bonding with the positively charged N-methylated chitosan, thus enhancing paper strength. Particularly, compared with chitosan and DMC, the TMC-coated paper exhibited better mechanical properties, printability and surface properties due to the high cationic charge density of TMC. Therefore, surface coating with TMC is of great benefit to decrease the printing problem of paper sheets and enhance the operation speed in offset printing. This work provides a valuable reference for the amelioration of the printability and physical properties of high-quality paper products for many promising applications.

A novel strategy for the direct analysis of non-conjugated steroids in water using paper spray mass spectrometry (PS-MS) has been developed. PS-MS was used in the identification and quantification of non-conjugated (free) steroids in fish tank water samples. Data shown herein indicates that individual amounts of free steroids can be detected in aqua as low as; 0.17 ng/µL, 0.039 ng/µL, 0.43 ng/µL, 0.0076 ng/µL for aldosterone, corticosterone, cortisol, and β-estrone, respectively, and with an average relative standard deviation of ca. in aqua.

Microfluidic paper-based analytical devices (µPADs) have provided a breakthrough in portable and low-cost point-of-care diagnostics. Despite their significant scope, the complexity of fabrication and reliance on expensive and sophisticated tools, have limited their outreach and possibility of commercialization. Herein, we report for the first time, a facile method to fabricate µPADs using a commonly available laser printer which drastically reduces the cost and complexity of fabrication. Toner ink is used to pattern the µPADs by printing, without modifying any factory configuration of the laser printer. Hydrophobic barriers are created by heating the patterned paper which melts the toner ink, facilitating its wicking into the cross-section of the substrate. Further, we demonstrate the utilization of the fabricated device by performing two assays. The proposed technique provides a versatile platform for rapid prototyping of µPADs with significant prospect in both developed and resource constrained region.

Industrially produced copy paper is presented as a novel optical material for narrow-band stimulated emission. Fluorescent brightening agents (FBA) such as Calcofluor White provide enough gain to exceed the threshold for amplified spontaneous emission. By applying an additional dye such as Coumarin 307, or simply a highlighter pen, the emission line can be shifted from blue (~440 nm), towards turquoise (>480 nm), up to orange (590 nm) which can be useful for spectroscopic applications. These properties are demonstrated in two papers, a commercial copy paper and a FBA-stained calligraphy paper.

The recent Zika virus (ZIKV) outbreak has prompted the need for field-ready diagnostics that are rapid, easy-to-use, handheld, and disposable while providing extreme sensitivity and specificity. To meet this demand, we developed a wax-printed paper microfluidic chip utilizing reverse transcription loop-mediated isothermal amplification (RT-LAMP). The developed simple and sensitive ZIKV assay was demonstrated using undiluted tap water, human urine, and diluted (10%) human blood plasma. Paper type, pore size, and channel dimension of various paper microfluidic chips were investigated and optimized to ensure proper filtration of direct-use biological samples (tap water, urine, and plasma) during capillary action-driven flow. Once ZIKV RNA has flowed and reached to a detection area of the paper microfluidic chip, it was excised for the addition of an RT-LAMP mixture with a pH indicator, then placed on a hot plate at 68 °C. Visible color changes from successful amplification were observed in 15 minutes and quantified by smartphone imaging. The limit of detection was as low as 1 copy/μL. The developed platform can also be used for identifying other flaviviruses, such as Chikungunya virus (CHIKV) and Dengue virus (DENV), and potentially other quickly transmitted virus pathogens, towards field-based diagnostics.

When a fire strikes libraries or archives, physical deterioration of the paper is so severe that its chemical properties are often regarded as less important. However, knowledge of the chemical changes of the papers upon nearly burning is necessary to design a subsequent conservation treatment. In the present study, we have examined a rag paper object, which partially survived a fire, and analysed its chemical properties by various methods. The polymeric state of cellulose, as well as its low-molar mass degradation products, were assessed. Comparison to an identical, unharmed duplicate provided a more profound understanding of the changes caused by the fire. Light scattering analysis revealed conformational changes of the cellulose molecule after high-temperature impact, and a chemical cross-linking was observed. In our study, we found the integrity of cellulose to depend on the temperature profile induced by the fire. The low thermal conductivity of cellulose protects the material even in close proximity to the burned edges.

Development of cost-effective and environmentally friendly manufacturing methods will enable important advances for the production of large-scale flexible electronics. Laser processing has shown to be a promising candidate that offers a fast and non-destructive way to produce highly conductive patterns on flexible substrates such as plastics. However, an emerging option with a lower environmental impact is instead the use of cellulose-based flexible substrates, such as paper. In this work we investigate the use of laser sintering of silver nanoparticle inks, which were inkjet-printed on three different types of paper. Patterns with a high conductivity could be manufactured where a special care was taken to prevent the substrates from damage by the intense laser light. We found that the best results was obtained for a photopaper, with a conductivity of 1.63 ∗ 107 S/m corresponding to nearly 26% of the bulk silver conductivity. In addition, we demonstrate laser sintering to fabricate a fully functional near field communication tag printed on a photopaper. Our results can have an important bearing for the development of cost-effective and environmentally friendly production methods for flexible electronics on a large scale.

Graphene oxide (GO) has shown a high potential to adsorb and store water molecules due to the oxygen-containing functional groups on its hydrophilic surface. In this study, we characterized the water absorbing properties of graphene oxide in the form of papers. We fabricated three kinds of graphene oxide papers, two with rich oxygen functional groups and one with partial chemical reduction, to vary the oxygen/carbon ratio and found that the paper with high oxygen content has higher moisture adsorption capability. For the GO paper with reduction, the overall moisture absorbance was reduced. However, the absorbance at high humidity was significantly improved due to direct formation of multilayer water vapor in the system, which derived from the weak interaction between the adsorbent and the adsorbate. To demonstrate one application of GO papers as a desiccant, we tested grape fruits with and without GO paper. The fruits with a GO paper exhibited longer-term preservation with delayed mold gathering because of desiccation effect from the paper. Our results suggest that GO will find numerous practical applications as a desiccant and is a promising material for moisture desiccation and food preservation.

We report fabrication of new generation nanoflowers (NFs) using gallic acid (GA) and copper (II) ions (Cu2+) acted as an organic and inorganic component, respectively with effective peroxidase mimic activities in solution and on filter membrane. Unlike the typical protein NFs synthesis mechanism, gallic acid NFs (GA-NFs) was formed via coordination reaction between carboxyl groups of GA and Cu2+. The different morphologies of the GA-NFs were acquired based upon whether the carboxyl groups in gallic acid are active or not. The peroxidase mimic activity of the GA-NFs relied on the Fenton reaction in the presence of hydrogen peroxide (H2O2) was tested towards m-cresol as a function of concentration of the GA-NFs, m-cresol, H2O2 and reaction time. Under the optimized conditions, the oxidative coupling of m-cresol with 4-aminoantipyrine (4-AAP) was catalyzed by the GA-NFs dispersed in solution and adsorbed on filter paper to form an antipyrine dye and it was visually and spectrophotometrically recorded. The m-cresol with range of 0.05–0.5 mM was detected in 10 min and 15 min by using the GA-NFs in solution and on filter paper, respectively. We demonstrated that the NFs can be produced from non-protein molecules and GA-NFs can be used as a promising nanocatalyst for a variety of applications.

Proper drying of hands after washing is an integral part of hand hygiene. An experimental study on 30 subjects using multiple comparisons of six hand drying methods including 1) drying on own clothes, 2) drying with one paper towel, 3) drying with two paper towels, 4) drying with a warm air dryer while holding hands stationary for 20 s, 5) drying with a warm air dryer while hand rubbing for 20 s, and 6) drying with a jet air dryer until complete dryness was achieved. It aimed to determine the effectiveness of different hand drying methods for removing bacteria from washed hands, so as to identify the optimum method using minimum resources. Our study demonstrated that the use of jet air dryers is the best method to eliminate bacteria on hands, whereas drying hands on one’s own clothes is the least effective. Drying hands in a stationary position could remove more bacteria than rubbing hands when using a warm air dryer for 20 s, which mimics people’s usual hand-drying practice. No significant difference in bacteria reduction was detected between the use of one or two paper towels for hand drying; therefore, using fewer resources is recommended to maintain environmental sustainability.

The study demonstrates a sustainable process for production of bio-crude oil via hydrothermal liquefaction of microbial biomass generated through co-cultivation of microalgae and bacteria coupled with wastewater remediation. Biomass concentration and wastewater treatment efficiency of a tertiary consortium (two microalgae and two bacteria) was evaluated on four different wastewater samples. Total biomass concentration, total nitrogen and COD removal efficiency was found to be 3.17 g L−1, 99.95% and 95.16% respectively when consortium was grown using paper industry wastewater in a photobioreactor under batch mode. Biomass concentration was enhanced to 4.1 g L−1 through intermittent feeding of nitrogen source and phosphate. GC-MS and FTIR analysis of bio-crude oil indicates abundance of the hydrocarbon fraction and in turn, better oil quality. Maximum distillate fraction of 30.62% lies within the boiling point range of 200–300 °C depicting suitability of the bio-crude oil for conversion into diesel oil, jet fuel and fuel for stoves.

There has been an increasing interest in recent years in isolating cellulose nanofibers from unbleached cellulose pulps for economic, environmental, and functional reasons. In the current work, cellulose nanofibers isolated from high-lignin unbleached neutral sulfite pulp were compared to those isolated from bleached rice straw pulp in making thin-film ultrafiltration membranes by vacuum filtration on hardened filter paper. The prepared membranes were characterized in terms of their microscopic structure, hydrophilicity, pure water flux, protein fouling, and ability to remove lime nanoparticles and purify papermaking wastewater effluent. Using cellulose nanofibers isolated from unbleached pulp facilitated the formation of a thin-film membrane (with a shorter filtration time for thin-film formation) and resulted in higher water flux than that obtained using nanofibers isolated from bleached fibers, without sacrificing its ability to remove the different pollutants.

The present research is focused on the application of glass beads (GBs) in fixed biofilm reactor (FBR) for the treatment of simulated methylene blue (MB) wastewater for 9 weeks under aerobic conditions. The COD of MB wastewater showed a reduction of 86.48% from 2000 to 270.4 mg/L, and BOD was declined up to 97.7% from 1095.5 to 25.03 mg/L. A drastic increase in the pH was observed until the 3rd week (8.5 to 8.28), and later, marginal changes between 8.30 ± 0.02 were noticed. A dramatic fluctuation was observed in ammonia concentration which increased (74.25 mg/L) up till the 2nd week, and from the 3rd week it started declining. In the 9th week, the ammonia concentration dropped to 16.5 mg/L. The color intensity increased significantly up till the 2nd week (259,237.46 Pt/Co) of the experiment and started decreasing slowly thereafter. The SEM–EDX analysis has shown the maximum quantity of carbon content in the GBs without biofilm, and then in the GB samples of 1st, and 9th-week old aerobic biofilms. Furthermore, Raman spectroscopy results revealed that the 9th-week GBs has a fine and strong MB peak and matched with that of the MB stock solution. Overall, the results have shown that the GBs filter media were suitable for the development of active biofilm communities for the treatment of dye wastewater. Thus, GBs-FBR system can be used for wastewater treatment to solve the current problem of industrial pollution in many countries and to protect the aquatic environment from dye pollution caused by the textile industry.

The effects of rice husk flour (RHF), rice husk biochar (RHB), and rice husk-sludge cake biochar (RH-SCB, expresses sludge cake biochar deriving from a sludge that has been previously conditioned with rice husk) used as physical conditioners on sludge dewaterability were compared. The effects of characteristics of physical conditioners on sludge compressibility and zeta potential were analyzed. The optimal rice husk-based powder was RH-SCB, which presented the highest net sludge solid yield (YN, expresses the dry mass flow by filtration) at 20.39 kg/(m2 h) for 70% dry sludge (DS). Characterization analysis indicates that the hardness and surface Fe content of powders which could influence the compressibility coefficient of sludge cake and sludge zeta potential were the major factors influencing sludge dewaterability. The comparison of feasibility and economic analysis showed that adding RH-SCB improves the quality of the sludge filtrate and reduces the pollution potential of conditioned sludge (the ratio of secondary and primary (RSP) of Cu, Zn, Cd reduces from 43.05, 144.00, 7.25 to 7.89, 14.63, 4.27, respectively), and the costs of using RH-SCB were the lowest (at 88.4% lower than that of the raw sludge). Therefore, it is feasible to use RH-SCB to improve sludge dewaterability.

Wastewater treatment coupled with electricity recovery in microbial fuel cell (MFC) prefer mixed anaerobic sludge as inoculum in anodic chamber than pure stain of electroactive bacteria (EAB), due to robustness and syntrophic association. Genetic modification is difficult to adopt for mixed sludge microbes for enhancing power production of MFC. Hence, we demonstrated use of eco-friendly plant secondary metabolites (PSM) with sub-lethal concentrations to enhance the rate of extracellular electron transfer between EAB and anode and validated it in both bench-scale as well as pilot-scale MFCs. The PSMs contain tannin, saponin and essential oils, which are having electron shuttling properties and their addition to microbes can cause alteration in cell morphology, electroactive behaviour and shifting in microbial population dynamics depending upon concentrations and types of PSM used. Improvement of 2.1-times and 3.8-times in power densities was observed in two different MFCs inoculated with Eucalyptus-extract pre-treated mixed anaerobic sludge and pure culture of Pseudomonas aeruginosa, respectively, as compared to respective control MFCs operated without adding Eucalyptus-extract to inoculum. When Eucalyptus-extract-dose was spiked to anodic chamber (125 l) of pilot-scale MFC, treating septage, the current production was dramatically improved. Thus, PSM-dosing to inoculum holds exciting promise for increasing electricity production of field-scale MFCs.

The use pesticide is one of the indispensable means to combat mosquito borne diseases. However, the repeated use of synthetic pesticides has induced resistance in the vector pest along with undesirable impact on the environment. The biodegradability, non-persistent and user’s safety are the root cause to prefer plant-derived pesticides to synthetic ones. The botanical based pesticides tend to degrade rapidly under the influence of several environmental factors. For the feasible application as pesticides, the plant products are formulated either as liquid or as purely solid. Despite well-established formulation technology in pesticide delivery, their handling trouble is being ignored. There is difficulty in liquid formulation of pesticide products, as they are prone to splashing and spillage, resulting in contamination, wastage and direct exposure to skin; whereas a solid formulation tends to produce dust. In the present work, cedarwood (Cedrus deodara) essential oil embedded pectin nanocapsules were produced. The nanocapsules were characterized according to their morphology, size, encapsulation efficiency and thermal stability. Furthermore, the nanocapsules were impregnated onto mini cotton tea bags to be employed as RTU (ready to use) formulation for treating the breeding sites of mosquitoes. The larvicidal activity of the bags treated with pectin-cedar wood nanocapsules was assessed against malaria vector, Anopheles culicifacies and 98% mortality was recorded till 4 weeks, this suggests its potential and hassle free applications in controlling mosquito vector.

The production of electricity and heat in Poland is the reason why the commercial power industry is the largest emitter of CO2. At the same time, significant amounts of solid by-products of combustion, which can be used to bind CO2 by mineral carbonation, are generated during the production processes. The article presents the results of research on mineral sequestration of CO2 (suspension-CO2) using fluidized bed combustion (FBC) fly ashes from hard coal combustion. The analyzed fluidized bed combustion (FBC) fly ashes were characterized by a significant free CaO content (1.7–6.8%) and a high CO2 binding potential ranging from 9.7 to 15.7%. In the case of fluidized bed combustion (FBC) fly ashes suspensions, the basic product of the carbonation process is calcium carbonate, which is clearly indicated by the results of the phase composition determination of solidified suspensions of fluidized bed combustion (FBC) fly ashes. The degree of carbonation, i.e. the degree of CO2 binding, calculated on the basis of the calcium carbonate content, in the analyzed suspensions was up to 1.1%. Mineral carbonation also reduces the leachability of pollutants such as: Zn, Cu, Pb, Ni, As, Hg, Cd, Cr, Cl, and SO42-. The pH is also reduced from about 12 to about 9. Aqueous suspensions of fluidized bed combustion (FBC) fly ashes with introduced CO2 can potentially be used in underground mining. These activities are in line with the concepts of Carbon Capture and Utilization and the idea of circular economy.

The photocatalytic degradation of a local South Africa oil refinery wastewater was conducted under UV radiation using an aqueous catalyst of titanium dioxide (TiO2), Degussa P25 (80% anatase, 20% rutile) in suspension. The experiment was carried out in a batch aerated photocatalytic reactor based on a central composite design (CCD) and analyzed using response surface methodology (RSM). The effects of three operational variables viz. TiO2 dosage (2–8 g/L), runtime (30–90 minutes), and airflow rate (0.768–1.48 L/min) were examined for the removal of phenol and soap oil and grease (SOG). The data derived from the CCD, and the successive analysis of variance (ANOVA) showed the TiO2 dosage to be the most influential factor, while the other factors were also significant (P 2 dosage and runtime as the main interaction factors on the removal efficiency. To maximize the pollutant removal, the optimum conditions were found at runtime of 90 minutes, TiO2 dosage of 8 g/L, and an aeration flow rate of 1.225 L/min. Under the conditions stated, the percentage removal of phenol (300 ± 7) and SOG (4000 ± 23) were 76% and 88% respectively. At 95% confidence level, the predicted models developed results were in reasonable agreement with that of the experimental data, which confirms the adaptability of the models. The first-order kinetic constants were estimated as 0.136 min−1 and 0.083 min−1 for SOG and phenol respectively.

Due to the high electric conductivity and large surface area of nanographites, such as graphene and graphite nanoplatlets, these materials have gained a large interest for use in energy storage devices. However, due to the thin flake geometry, the viscosity of aqueous suspensions containing these materials is high even at low solids contents. This together with the use of high viscosity bio-based binders makes it challenging to coat in a roll-to-roll process with sufficient coating thickness. Electrode materials for commercial energy storage devices are often suspended by organic solvents at high solids contents and coated onto metal foils used as current-collectors. Another interesting approach is to coat the electrode onto the separator, to enable large-scale production of flat cell stacks. Here, we demonstrate an alternative, water-based approach that utilize slot-die coating to coat aqueous nanographite suspension with nanocellulose binder onto the paper separator, and onto the current collector as reference, in aqueous metal-free supercapacitors. The results show that the difference in device equivalent series resistance (ESR) due to interfacial resistance between electrode and current collector was much lower than expected and thus similar or lower compared to other studies with a aqueous supercapacitors. This indicates that electrode coated paper separator substrates could be a promising approach and a possible route for manufacturing of low-cost, environmentally friendly and metal-free energy storage devices.

The aim of this study was to test the use of IP-10 detection in dried plasma from contact studies individuals (contacts of smear positive patients), by comparing it with IP-10 and IFN-γ detection in direct plasma, to establish IP-10 detection in DPS as a useful assay for LTBI diagnosis. Whole blood samples were collected from 80 subjects: 12 with active tuberculosis (TB), and 68 from contact studies. The amount of IFN-γ produced by sensitized T cells was determined in direct plasma by QuantiFERON Gold In-Tube test. IP-10 levels were determined in direct and dried plasma by an in-house ELISA. For dried plasma IP-10 determination, two 25 µl plasma drops were dried in Whatman903 filter paper and sent by mail to the laboratory. Regarding TB patients, 100.0%, 91.7% and 75.0% were positive for IFN-γ detection and IP-10 detection in direct and dried plasma, respectively. In contacts, 69.1%, 60.3% and 48.5% had positive results after IFN-γ and IP-10 in direct and dried plasma, respectively. The agreement among in vitro tests was substantial and IP-10 levels in direct and dried plasma were strongly correlated (r = 0.897). In conclusion, IP-10 detection in dried plasma is a simple and safe method that would help improve LTBI management.

The world does not have too much time to ensure that the fast-growing population has enough land, food, water and energy. The rising food demand has brought a positive surge in fertilizers’ demand and agriculture-based economy. The world is using 170 million tons of fertilizer every year for food, fuel, fiber, and feed. The nitrogenous fertilizers are being used to meet 48% of the total food demand of the world. High fertilizer inputs augment the reactive nitrogen levels in soil, air, and water. The unassimilated reactive nitrogen changes into a pollutant and harms the natural resources. The use of controlled-release fertilizers for slowing down the nutrients’ leaching has recently been practiced by farmers. However, to date, monitoring of the complete discharge time and discharge rate of controlled released fertilizers is not completely understood by the researchers. In this work, corn starch was thermally processed into a week gel-like coating material by reacting with urea and borate. The granular urea was coated with native and processed starch in a fluidized bed reactor having bottom-up fluid delivery system. The processed starch exhibited better thermal and mechanical stability as compared to the native starch. Unlike the pure starch, the storage modulus of the processed starch dominated the loss modulus. The release time of urea, coated with processed starch, remained remarkably larger than the uncoated urea.

Spray paint exhaust gas contains recalcitrant volatile organic compounds (VOCs), such as benzene, toluene and xylene (BTX). Treating BTX with a biofilter often achieves unsatisfactory results because the biofilter lacks efficient microbial community. In this work, three strains for BTX degradation were isolated and identified as Pseudomonas putida, Bacillus cereus and Bacillus subtilis by using 16S rRNA sequencing technology. A consortium of highly efficient microbial community was then constructed on a stable biofilm to treat BTX in a biofilter. A relatively suitable ratio of P. putida, B. cereus and B. subtilis was obtained. An efficiency of over 90% was achieved in the biofilter with VOC concentration of 1000 mg/m3 through inoculation with the microbial community after only 10 days of operation. Thus, fast start-up of the biofilter was realised. Analysis of intermediate products by gas chromatography–mass spectrometry indicated that BTX was degraded into short-chain aldehydes or acids via ring opening reactions.

The use of additives in the enzymatic saccharification of lignocellulosic biomass can have positive effects, decreasing the unproductive adsorption of cellulases on lignin and reducing the loss of enzyme activity. Soybean protein stands out as a potential lignin-blocking additive, but the economic impact of its use has not previously been investigated. Here, a systematic evaluation was performed of the process conditions, together with a techno-economic analysis, for the use of soybean protein in the saccharification of hydrothermally pretreated sugarcane bagasse in the context of an integrated 1G-2G ethanol biorefinery. Statistical experimental design methodology was firstly applied as a tool to select the process variable solids loading at 15% (w/w) and soybean protein concentration at 12% (w/w), followed by determination of enzyme dosage at 10 FPU/g and hydrolysis time of 24 h. The saccharification of sugarcane bagasse under these conditions enabled an increase of 26% in the amount of glucose released, compared to the control without additive. The retro-techno-economic analysis (RTEA) technique showed that to make the biorefinery economically feasible, some performance targets should be reached experimentally such as increasing biomass conversion to ideally 80% and reducing enzyme loading to 5.6 FPU/g in the presence of low-cost soybean protein.

The production cost of controlled-release fertilizers is an important factoring limiting their applications. To reduce the coating cost of diammonium phosphate (DAP) and improve its nutrition release characteristics, the fertilizer cores were modified by water polishing with three dosages at 1, 2, and 3%. The effects of modification were evaluated in terms of particle hardness, size distribution, angle of repose and specific surface area. Castor oil-based polyurethane was used as coating material for fertilizer performance evaluation. A pot experiment was conducted to verify the fertilizer efficiency of coated diammonium phosphate (CDAP) with maize. The results showed that polishing with 2% water reduced the angle of repose by 2.48–10.57% and specific surface area by 5.70–48.76%, making it more suitable for coating. The nutrient release period of CDAP was significantly prolonged by 5.36 times. Soil available phosphorous, enzyme activities, maize grain yield, and phosphorous use efficiency were all improved through the blending application of coated and normal phosphate fertilizer. This study demonstrated that water-based surface modification is a low-cost and effective method for improvement and promotion of controlled release P fertilizers.

Indigo has been widely used as a dye in the industrial dyeing due to its good color fastness in dyeing cellulose fibers. However, excess reducing agent, “insurance powder (Na2S2O4)”, was always used in the actual production of the factory, sparking serious pollution (water pollution and air pollution). Herein, we developed a practical and environment-friendly indirect electrochemical reduction of indigo, and applied this method for cloth dyeing. The electrochemical device was designed in the combination of source of electro-catalytic reduction and dyeing. The iron-triethanolamine-calcium gluconate (Fe-TEOA-Ca) complex played a role of key intermediate, and ultrasonic wave was found to speed up the indirect electro-catalytic process. The electrochemical performance of intermedia was improved by calcium ion addition. Washed with oxalic acid solution, the dyed fabric could achieve the level of color fastness in industry standard. Generally speaking, our method leads to a green route for indigo reduction using electrochemistry, which may change the crafting process of indigo dyeing in industry.

In this study, actual swage waste activated sludge in batch reactors was employed to assess the synergistic effect of free nitrous acid and Fenton pre-treatments on enhancing methane production in the anaerobic digestion process. In addition to methane enhancement, the mechanisms driving the enhancement were also investigated via measuring enzymes activity and solubilisation of organic matter. This study revealed that the combined pre-treatments solubilised organic matter significantly more than the bioreactors pre-treated with individual FNA and Fenton. For understanding the influence of pre-treatments on solubilisation of organic matter, soluble protein, soluble polysaccharide and soluble chemical oxygen demand (SCOD) were measured before and after the treatments and it was shown that they respectively increased by 973%, 33% and 353% after the treatments. Protease and cellulase activity, as the key constituents of the microbial community in activated sludge, decreased considerably after the combined pre-treatments 42% and 32% respectively, which resulted in considerable methane enhancement. The results corroborate the synergy of the combined FNA and Fenton pre-treatment in degrading the organic and microbial constituents in waste activated sludge, paving the way for the big-scale implementation of these technologies.

The soda ash industry is a part of the chemical industry, which is responsible for the production of sodium carbonate, calcium chloride, absorbent masses, evaporated wet salt, food salt, pickling salt or salt tablets. During manufacturing of those products, strongly alkaline wastewater is generated. It could be characterised by a high electrolytic conductivity and concentration of ions: chlorides, sulfates, phosphates, calcium, sodium, magnesium, potassium and ammonium. The aim of the research was to test the effectiveness of removing sodium, potassium, calcium, magnesium and ammonium from wastewater after production of soda ash by three sorbents: Halosorb, Compakt and Damsorb K. The process was carried out using dynamic method with different flow of wastewater through the column with sorbent. It allowed to reduce concentrations of all cations tested. Moreover, it was found that sorbent type did not significantly affect the removal of any of the ions, but the deposit load had significant impact on the removal of all ions tested.