Search

Analysis of the spatial and temporal variation patterns of surface evapotranspiration is important for understanding global climate change, promoting scientific deployment of regional water resources, and improving crop yield and water productivity. Based on Landsat 8 OIL_TIRS data and remote sensing image data of the lower Yangtze River urban cluster for the same period of 2016–2021, combined with soil and meteorological data of the study area, this paper constructed a multiple linear regression (MLR) model and an extreme learning machine (ELM) inversion model with evapotranspiration as the target and, based on the model inversion, quantitatively and qualitatively analyzed the spatial and temporal variability in surface evapotranspiration in the study area in the past six years. The results show that both models based on feature factors and spectral indices obtained a good inversion accuracy, with the fusion of feature factors effectively improving the inversion ability of the model for ET. The best model for ET in 2016, 2017, and 2021 was MLR, with an R2 greater than 0.8; the best model for ET in 2018–2019 was ELM, with an R2 of 0.83 and 0.62, respectively. The inter-annual ET in the study area showed a "double-peak" dynamic variation, with peaks in 2018 and 2020; the intra-annual ET showed a single-peak cycle, with peaks in July–August. Seasonal differences were obvious, and spatially high-ET areas were mainly found in rural areas north of the Yangtze River and central and western China where agricultural land is concentrated. The net solar radiation, soil heat flux, soil temperature and humidity, and fractional vegetation cover all had significant positive effects on ET, with correlation coefficients ranging from 0.39 to 0.94. This study can provide methodological and scientific support for the quantitative and qualitative estimation of regional ET. [ABSTRACT FROM AUTHOR]

The detection of lava tubes beneath the surfaces of the Moon and Mars has been a popular research topic and challenge in planetary radar observation. In recent years, the Moon–based ground penetrating radar (GPR) carried by the Chinese Chang'e–3/–4 mission, the RIMFAX radar carried by the Mars mission Perseverance, and the RoSPR radar and MOSIR radar carried by China's Tianwen–1 orbiter have extensively promoted the exploration of the underground space of extraterrestrial bodies, which is crucial for the future utilization and development of these spaces. This paper expounds on the principles, methods, and detection results of using GPR to detect lava tubes on the Moon and Mars. First, lava tubes' formation mechanism and morphological characteristics are outlined, followed by an introduction to GPR's working principles and classification. The advantages, disadvantages, and prospects of different types of radar in detecting the lava tubes are analyzed. Finally, the distribution of lava tubes on the Moon and Mars is briefly summarized, and the potential utilization of lava tubes is discussed. We believe that the GPR technique is an effective geophysical method for exploring the underground structures of the Moon and Mars, and the lava tubes beneath the surface of extraterrestrial bodies can provide important references for selecting future Moon and Mars bases. [ABSTRACT FROM AUTHOR]

As an essential infrastructure that provides positioning, navigation, and timing services, China constructed the BeiDou Navigation Satellite System (BDS). The last BDS satellite was launched in June 2020, which represents the completion of BDS. BDS's constellation consists of Medium Earth Orbit (MEO), Inclined Geosynchronous Orbit (IGSO), and Geostationary Orbit satellites. The precise modeling of non-conservative forces for BDS satellites is a challenging task. As an independent observation, Satellite Laser Ranging (SLR) is an important validation method of GNSS orbit modeling. In this paper, we validated the precise orbit products of different Analysis Centers (ACs) by using SLR observations, focusing on the BDS orbit modeling. By comparing BDS precise orbit products generated by four ACs with respect to SLR observations for the period of February 2017 to March 2021, we proved that an obvious satellite signature effect exists in the SLR residuals of BDS observed by multi-photon stations. The result indicates that multi-photon stations have a root mean square (RMS) of SLR residuals about 5 mm lower than that of single-photon detectors. The slope of SLR residuals with regard to nadir angle of IGSO satellites for single-photon and multi-photon stations is −2.0 and −2.5 mm/deg, respectively, while the slope of MEO satellites for these stations is about −0.6 to −0.3 and −1.0 to −0.4 mm/deg, respectively. To assess the effect of non-conservative force modeling, we selected seven high-performing stations, including five single-photon and two multi-photon stations. By comparing the SLR residuals of four ACs' orbits, we analyzed the effect of the solutions of orbit processing, especially solar radiation pressure (SRP) models. We found that some centers may have modeling defects, including BDS-3 orbits of the Deutsches GeoForschungsZentrum and BDS-2 orbits of the European Space Agency, inferred from the large RMS of SLR residuals. Modeling the SRP of BDS satellites is challenging, while an appropriate prior box-wing model can improve the accuracy of SRP modeling and provide a more stable performance. [ABSTRACT FROM AUTHOR]

The LuTan-1(LT-1), known as the L-band differential interferometric synthetic aperture radar (SAR) satellite system, is an essential piece of civil infrastructure in China, providing extensive applications such as surface deformation monitoring and topographic mapping. To achieve high-resolution and wide-swath (HRWS) observation abilities, the LT-1 takes the dual receiving antenna (DRA) imaging mode as its working mode. However, amplitude and phase errors between channels lead to a mismatch between the reconstruction filter and the multichannel echo signal, worsen the reconstructed azimuth spectrum, and introduce ambiguity targets in the final imaging results, seriously affecting the final imaging quality. In order to better evaluate the channel error and azimuth ambiguity performance of the LT-1 system, this paper proposed an advanced channel consistency correction method and conducted many measured data experiments. The experimental results show that the proposed method is effective, and the LT-1 system has excellent channel error control and azimuth ambiguity performance. [ABSTRACT FROM AUTHOR]

In this paper, a method for joint sea surface rainfall intensity (RI), wind speed, and wave height retrieval based on spaceborne global navigation satellite system reflectometry (GNSS-R) data is proposed, which especially considers the effects between these two parameters. A method of rainfall detection (RD) according to different wind speed ranges is also proposed by mitigating the impact of swell and wind speed. The results, with data collected over the oceans near Southeast Asia, show that the RD method has a detection accuracy of up to 81.74%. The RI retrieval accuracy can reach about 2 mm/h by simultaneously correcting the effects of wind speed and swell. The accuracy of wind speed retrieval is improved by about 5% after removing rainfall interference through RD in advance. After considering the influence of wind speed and eliminating rainfall interference, the retrieval accuracy of significant wave height (SWH) is improved by about 18%. Finally, the deep convolutional neural network (DCNN) model is built to estimate the SWH of the swell. The results show that the retrieval accuracy of the swell height is better than 0.20 m after excluding rainfall interference. The proposed joint retrieval method provides an important reference for the future acquisition of multiple high-precision marine geophysical parameters by spaceborne GNSS-R technology. [ABSTRACT FROM AUTHOR]

While rapid urbanization promotes social and economic development, it exacerbates human outdoor thermal comfort, which increases the risks to human health. This paper uses four thermal comfort indices and multiple satellite observations to explore the urbanization effect on summer heat stress in Guangdong from 1979–2018, a coastal province of China. Two types of thermal comfort index are used here, namely the direct thermal comfort index (Heat Index, HI; Temperature–Humidity Index, THI; Discomfort Index, DI) and the physiological thermal comfort index (Universal Thermal Climate Index, UTCI). We compare the differences in the urbanization effects on the changes in the three direct thermal comfort indices (HI, THI, and DI) and a physiological thermal comfort index (UTCI). The results show that all four thermal comfort indices indicate an overall warming trend. Of them, urban sites show a higher warming trend than rural sites, indicating that heat stress changes are significantly influenced by urbanization from 1979–2018, which is consistent with the effect of urbanization on surface air temperature. However, except for the UTCI, this warming of direct thermal comfort indices affected by urbanization has become insignificant under the regional vegetation greening from 2004–2018 (also consistent with surface air temperature). This is primarily attributed to the different effects of wind speed on the physiological thermal comfort index in urban and rural areas: Decreasing wind speeds in urban areas lead to an increase in UTCI, while wind speeds in rural areas increase instead and decrease UTCI, thus widening the UTCI differences between urban and rural areas. Our results indicate that urbanization has a different effect on thermal comfort indices. When using the thermal comfort index, it is necessary to consider that different thermal comfort indices may bring different results. UTCI considers more factors that affect human heat perception, so it can better describe human outdoor thermal comfort. It also highlights the importance of urban ventilation and urban greenness in mitigating urban outdoor thermal comfort in the sustainable construction of future urbanization in coastal cities. [ABSTRACT FROM AUTHOR]

The technology of remote sensing-assisted tree species classification is increasingly developing, but the rapid refinement of tree species classification on a large scale is still challenging. As one of the treasures of ecological resources in China, Arxan has 80% forest cover, and tree species classification surveys guarantee ecological environment management and sustainable development. In this study, we identified tree species in three samples within the Arxan Duraer Forestry Zone based on the spectral, textural, and topographic features of unmanned aerial vehicle (UAV) multispectral remote sensing imagery and light detection and ranging (LiDAR) point cloud data as classification variables to distinguish among birch, larch, and nonforest areas. The best extracted classification variables were combined to compare the accuracy of the random forest (RF), support vector machine (SVM), and classification and regression tree (CART) methodologies for classifying species into three sample strips in the Arxan Duraer Forestry Zone. Furthermore, the effect on the overall classification results of adding a canopy height model (CHM) was investigated based on spectral and texture feature classification combined with field measurement data to improve the accuracy. The results showed that the overall accuracy of the RF was 79%, and the kappa coefficient was 0.63. After adding the CHM extracted from the point cloud data, the overall accuracy was improved by 7%, and the kappa coefficient increased to 0.75. The overall accuracy of the CART model was 78%, and the kappa coefficient was 0.63; the overall accuracy of the SVM was 81%, and the kappa coefficient was 0.67; and the overall accuracy of the RF was 86%, and the kappa coefficient was 0.75. To verify whether the above results can be applied to a large area, Google Earth Engine was used to write code to extract the features required for classification from Sentinel-2 multispectral and radar topographic data (create equivalent conditions), and six tree species and one nonforest in the study area were classified using RF, with an overall accuracy of 0.98, and a kappa coefficient of 0.97. In this paper, we mainly integrate active and passive remote sensing data for forest surveying and add vertical data to a two-dimensional image to form a three-dimensional scene. The main goal of the research is not only to find schemes to improve the accuracy of tree species classification, but also to apply the results to large-scale areas. This is necessary to improve the time-consuming and labor-intensive traditional forest survey methods and to ensure the accuracy and reliability of survey data. [ABSTRACT FROM AUTHOR]

As a particular type of alpine glacier, debris-covered glaciers are essential for local water resources and glacial disaster warnings. The Eastern Tomur Peak Region (EPTR) is the most concentrated glacier in Tien Shan Mountain, China, where the glaciers have not been studied in detail. This paper evaluates the delineation accuracy of Landsat8 OLI, Sentinel-1A, and GF images for debris-covered glaciers in the EPTR. Each image uses the most advanced delineation method for itself to minimize the error of inherent resolutions. The results show that the accuracy of these images for delineating debris-covered glaciers is very high, and the F1 scores are expressed as 96.73%, 93.55%, and 95.81%, respectively. Therefore, Landsat images were selected to analyze the area change of EPTR from 2000 to 2022 over a 5-year time scale. The results indicate that glaciers of the EPTR decreased by 19.05 km2 from 2000 to 2020, accounting for 1.9% (0.08% a−1), and debris increased by 10.8%, which validates the opinion that the presence of debris inhibits glacier melting. The most varied time was 2010–2022, but it was much less than other Tien Shan regions. The lower glacier ablation rate in this area results from the combined effect of decreased bare ice and increased debris. The main reason for the change in debris-covered glaciers is the increase in temperature. [ABSTRACT FROM AUTHOR]

The Wudaoliang–Changshagongma fault is one of the NW-trending faults located within the southern Bayan Har Block of the Tibetan Plateau in China. In this paper, we used high-resolution imagery and digital elevation model data to study the geomorphological and geological characteristics of the fault. Furthermore, the result also determined the fault trace and estimated the average horizontal slip rate of the fault since the late Quaternary to have been 2.6 ± 0.6 mm/a. This slip rate is approximately equivalent to that of the Awancang, Madoi–Garde, and Dari faults, which are also located within the block. Furthermore, the slip rates of these faults obtained by remote sensing and geological methods are consistent with GPS observations. It indicates that tectonic deformation within the block is continuous and diffuse. Using trenching study results and sedimentary radiocarbon dating, we identified four paleoearthquake events that occurred at 42,378–32,975, 33,935–20,663, 5052–4862, and after 673–628 cal BP, respectively. The recurrence intervals of large earthquakes on the faults within the block are much longer than those of the boundary faults, and the slip rates are also smaller, indicating that faults within the block play a regulatory role in the tectonic deformation of the Bayan Har Block. [ABSTRACT FROM AUTHOR]

High-rise building areas (HRBs) provide significant social and environmental services and play a crucial role in modern urbanization. The large-scale and long-term spatial distribution of HRBs is of great interest to many fields, such as urban planning and local climate analysis. While previous studies have confirmed the value of Sentinel-2 images in extracting HRBs and their changes, current work is limited to relatively local areas and short-term analysis. One reason is due to the fact that the earliest Sentinel-2 image can only date back to 2015. To address this research gap, this paper proposes an efficient procedure to intelligently extract HRBs and their changes from multitemporal Landsat-7 and Sentinel-2 images, using a specifically designed fully convolutional network. To validate the proposed method, we selected four typical cities in China, namely, Beijing, Shanghai, Guangzhou, and Zhengzhou, as study areas. We utilized Landsat-7 images acquired in 2000 and 2010, along with Sentinel-2 images acquired in 2020, as experimental data. We extracted and analyzed three periods of HRBs and their changes in the four cities, along with urban rail terminal data and gross domestic product (GDP) data in the same period. The results show that the proposed method can efficiently extract HRBs and their changes in the four cities over the past 20 years, with an overall accuracy of more than 90%. HRBs changes are primarily driven by urban planning policies and geographical factors. There is a strong positive correlation between the increase in HRBs and the increase in rail terminals, both in terms of quantity and spatial distribution. Additionally, there is a positive correlation between HRBs increase and GDP increase in terms of quantity, but the trend varies in different cities due to their diverse developing modes. Overall, the results indicate that the proposed method can be a potential operational tool to extract large-scale and long-term HRBs and their changes in China. [ABSTRACT FROM AUTHOR]

The subtropical forests in China play a pivotal part in the global and regional carbon–water cycle and in regulating the climate. Ecosystem water-use efficiency (WUE) is a crucial index for understanding the trade-off between ecosystem carbon gain and water consumption. However, the underlying mechanisms of the WUE in forest ecosystems, especially the different subtropical forests, have remained unclear. In this paper, we developed a simple framework for estimating forest WUE and revealing the underlying mechanisms of forest WUE changes via a series of numerical experiments. Validated by measured WUE, the simulated WUE from our developed WUE framework showed a good performance. In addition, we found that the subtropical forest WUE experienced a significant increasing trend during 2001–2018, especially in evergreen and deciduous broadleaf forests where the increasing rate was greatest (0.027 gC kg−1 H2O year−1, p < 0.001). Further analysis indicated that the atmospheric CO2 concentration and vapor pressure deficits (VPD), rather than leaf area index (LAI), were the dominant drivers leading to the subtropical forest WUE changes. When summed for the whole subtropical forests, CO2 and VPD had an almost equal spatial impact on annual WUE change trends and accounted for 45.3% and 49.1% of the whole study area, respectively. This suggests that future forest management aiming to increase forest carbon uptake and protect water resources needs to pay more attention to the long-term impacts of climate change on forest WUE. [ABSTRACT FROM AUTHOR]

Soil salinization is a critical and global environmental problem. Effectively mapping and monitoring the spatial distribution of soil salinity is essential. The main aim of this work was to map soil salinity in Shandong Province located on the Yellow River Delta of China using Sentinel-1/2 remote sensing data and digital elevation model (DEM) data, coupled with soil sampling data, and combined with four regression models: support vector regression (SVR), stepwise multi-regression (SMR), partial least squares regression (PLSR) and random forest regression (RFR). For these purposes, 60 soil samples were collected during the field survey conducted from 9 to 14 October 2019, corresponding to the Sentinel-1/2 and DEM data. Then we established a soil salinity and feature dataset based on the sampled data and the features extracted from Sentinel-1/2 and DEM data. This study adopted the feature importance of the RF model to screen all features. The results showed that the CRSI index made the greatest contribution in retrieving soil salinity in this region. In this paper, 18 sampling points were used to validate and compare the performance of the four models. The results reveal that, compared with the other regression models, the PLSR model has the best performance (R2 = 0.66, and RMSE = 1.30). Finally, the PLSR method was used to predict the spatial distribution of soil salinity in the Yellow River Delta. We concluded that the model can be used effectively for the quantitative estimation of soil salinity and provides a useful tool for ecological construction. [ABSTRACT FROM AUTHOR]

Low- and medium-resolution satellites have been a relatively mature platform for inland eutrophic water classification and chlorophyll a concentration (Chl-a) retrieval algorithms. However, for oligotrophic and mesotrophic waters in small- and medium-sized reservoirs, problems of low satellite resolution, insufficient water sampling, and higher uncertainty in retrieval accuracy exist. In this paper, a hybrid Chl-a estimation method based on spectral characteristics (i.e., remote sensing reflectance (Rrs)) classification was developed for oligotrophic and mesotrophic waters using high-resolution satellite Sentinel-2 (A and B) data. First, 99 samples and quasi-synchronous Sentinel-2 satellite data were collected from four small- and medium-sized reservoirs in central China, and the usability of the Sentinel-2 Rrs data in inland oligotrophic and mesotrophic waters was verified by accurate atmospheric correction. Second, a new optical classification method was constructed based on different water characteristics to classify waters into clear water, phytoplankton-dominated water, and water dominated by phytoplankton and suspended matter together using the thresholds of Rrs490/Rrs560 and Rrs665/Rrs560. The proposed method has a higher classification accuracy compared to other classification methods, and the band-ratio algorithm is simpler and more effective for satellite sensors without NIR bands. Third, given the sensitivity of the empirical method to water variability and the ease of development and implementation, a nonlinear least squares fitted one-dimensional nonlinear function was established based on the selection of the best-fitting spectral indices for different optical water types (OWTs) and compared with other Chl-a estimation algorithms. The validation results showed that the hybrid two-band method had the highest accuracy with squared correlation coefficient, root mean squared difference, mean absolute percentage error, and bias of 0.85, 2.93, 32.42%, and −0.75 mg/m3, respectively, and the results of the residual values further validated the applicability and reliability of the model. Finally, the performance of the classification and estimation algorithms on the four reservoirs was evaluated to obtain images mapping the Chl-a in the reservoirs. In conclusion, this study improves the accuracy of Chl-a estimation for oligotrophic and mesotrophic waters by combining a new classification algorithm with a two-band hybrid model, which is an important contribution to solving the problem of low resolution and high uncertainty in the retrieval of Chl-a in oligotrophic and mesotrophic waters in small- and medium-sized reservoirs and has the potential to be applied to other optically similar oligotrophic and mesotrophic lakes and reservoirs using similar spectrally satellite sensors. [ABSTRACT FROM AUTHOR]

With extreme rainfall events and rapid urbanization, urban flood disaster events are increasing dramatically. As a key flood control city in China, Changchun City suffers casualties and economic losses every year due to floods. The improvement of flood resilience has become an important means for cities to resist flood risks. Therefore, this paper constructs an assessment model of urban flood resilience from four aspects: infrastructure, environment, society and economy. Then, it quantifies infrastructure and environmental vulnerability based on GIS, and uses TOPSIS to quantify social and economic recoverability. Finally, based on k-means clustering of infrastructure and environmental vulnerability and social and economic recoverability, the flood resilience of Changchun City was evaluated. The results show that different factors have different effects on flood resilience, and cities with low infrastructure and environmental vulnerability and high socioeconomic recoverability are more resilient in the face of floods. In addition, cities in the same cluster have the same flood resilience characteristics. The proposed framework can be extended to other regions of China or different countries by simply modifying the indicator system according to different regions, providing experience for regional flood mitigation and improving flood resilience. [ABSTRACT FROM AUTHOR]

Dust emission is a common catastrophic weather phenomenon in Northern China. This phenomenon not only causes environmental problems, such as air pollution, but also has an important impact on the global dust cycle and climate change. On the basis of the dust weather observation data of 44 surface meteorological stations in the Tarim Basin from 1989 to 2021, combined with the dust aerosol optical depth (DAOD), dust surface mass concentration (DUSMASS) and wind speed data, this paper analyses the spatial and temporal dust weather characteristics in the Tarim Basin over the past 33 years. Results show that the frequency of dust weather in the Tarim Basin has declined in the past 33 years. Dust weather mainly consisted of floating dust, followed by blowing dust and dust storm. This weather had a significant seasonal change, with more dust in spring and summer and less in autumn and winter. The dust weather was mainly distributed along the south edge of the Tarim Basin and the desert hinterland of Tazhong. The spatial distribution of the dust intensity (DI) index was basically consistent with the dust weather days. Moreover, the DAOD was obviously affected by dust weather and had a significant positive correlation with the number of dust weather days and the DI, suggesting the vertical concentration of dust particles to a certain extent. Wind is also one of the most important factors affecting the release of dust. The frequency of strong wind weather decreases from the northeast to the southwest, which corresponds to the distribution of the DUSMASS. [ABSTRACT FROM AUTHOR]

Interferometric synthetic aperture radar (InSAR) has developed rapidly over the past years and is considered as an important method for surface deformation monitoring, benefiting from growing data quantities and improving data quality. However, the handing of SAR big data poses significant challenges for related algorithms and pipeline, particularly in large-scale SAR data processing. In addition, InSAR algorithms are highly complex, and their task dependencies are intricate. There is a lack of efficient optimization models and task scheduling for InSAR pipeline. In this paper, we design parallel time-series InSAR processing models based on multi-thread technology for high efficiency in processing InSAR big data. These models concentrate on parallelizing critical algorithms that have high complexity, with a focus on deconstructing two computationally intensive algorithms through loop unrolling. Our parallel models have shown a significant improvement of 10–20 times in performance. We have also developed a parallel optimization tool, Simultaneous Task Automatic Runtime (STAR), which utilizes a data flow optimization strategy with thread pool technology to address the problem of low CPU utilization resulting from multiple modules and task dependencies in the InSAR processing pipeline. STAR provides a data-driven pipeline and enables concurrent execution of multiple tasks, with greater flexibility to keep the CPU busy and further improve CPU utilization through predetermined task flow. Additionally, a supercomputing-based system has been constructed for processing massive InSAR scientific big data and providing technical support for nationwide surface deformation measurement, in accordance with the framework of time series InSAR data processing. Using this system, we processed InSAR data with the volumes of 500 TB and 700 TB in 5 and 7 days, respectively. Finally we generated two maps of land surface deformation all over China. [ABSTRACT FROM AUTHOR]

The rapid, up-to-date, cost-effective acquisition and tracking of intertidal topography are the fundamental basis for timely, high-priority protection and restoration of the intertidal zone. The low cost, ease of use, and flexible UAV-based photogrammetry have revolutionized the monitoring of intertidal zones. However, the capability of the RTK-assisted UAV photogrammetry without ground control points, the impact of flight configuration difference, the presence of surface water in low-lying intertidal areas on the photogrammetric accuracy, and the potential of UAV/satellite Synergy remain unknown. In this paper, we used an RTK-assisted UAV to assess the impact of the above-mentioned considerations quantitatively on photogrammetric results in the context of annual monitoring of the Chongming Dongtan Nature Reserve, China based on an optimal flight combination. The results suggested that (1) RTK-assisted UAVs can obtain high-accuracy topographic data with a vertical RMSE of 3.1 cm, without the need for ground control points. (2) The effect of flight altitude on topographic accuracy was most significant and also nonlinear. (3) The elevation obtained by UAV photogrammetry was overestimated by approximately 2.4 cm in the low-lying water-bearing regions. (4) The integration of UAV and satellite observations can increase the accuracy of satellite-based waterline methods by 51%. These quantitative results not only provide scientific insights and guidelines for the balance between accuracy and efficiency in utilizing UAV-based intertidal monitoring, but also demonstrate the great potential of combined UAV and satellite observations in identifying coastal erosion hotspots. This establishes high-priority protection mechanisms and promotes coastal restoration. [ABSTRACT FROM AUTHOR]

Drought poses a serious threat to agricultural production and food security in the context of global climate change. Few studies have explored the response mechanism and lag time of agricultural drought to meteorological drought from the perspective of cultivated land types. This paper analyzes the spatiotemporal evolution patterns and hysteresis relationship of meteorological and agricultural droughts in the middle and lower reaches of the Yangtze River in China. Here, the Moderate Resolution Imaging Spectroradiometer (MODIS) vegetation index products and surface temperature products were selected to calculate the Temperature Vegetation Dryness Index (TVDI) from 2010 to 2015. Furthermore, we obtained the Standardized Precipitation Evapotranspiration Index (SPEI) and the Palmer Drought Severity Index (PDSI) for the same period. Based on these indices, we analyzed the correlation and the hysteresis relationship between agricultural and meteorological drought in rainfed and irrigated arable land. The results showed that, (1) compared with SPEI, the high spatial resolution PDSI data were deemed more suitable for the subsequent accurate and scientific analysis of the relationship between meteorological and agricultural droughts. (2) When meteorological drought occurs, irrigated arable land is the first to experience agricultural drought, and then alleviates when the drought is most severe in rainfed arable land, indicating that irrigated arable land is more sensitive to drought events when exposed to the same degree of drought risk. However, rainfed arable land is actually more susceptible to agricultural drought due to the intervention of irrigation measures. (3) According to the cross-wavelet transform analysis, agricultural droughts significantly lag behind meteorological droughts by about 33 days during the development process of drought events. (4) The spatial distribution of the correlation coefficient between the PDSI and TVDI shows that the area with negative correlations of rainfed croplands and the area with positive correlations of irrigated croplands account for 77.55% and 68.04% of cropland areas, respectively. This study clarifies and distinguishes the details of the meteorological-to-agricultural drought relationship in rainfed and irrigated arable land, noting that an accurate lag time can provide useful guidance for drought monitoring management and irrigation project planning in the middle and lower reaches of the Yangtze River. [ABSTRACT FROM AUTHOR]

On 14 December 2013 (UTC), China's Chang'E-3 (CE-3) succeeded in landing on the Moon's surface. The CE-3 landing site is in northern Mare Imbrium and several tens of meters away from the rim of a young crater with a few hundred meters in diameter. In-situ measurements of lunar soil around the roving area were conducted from Active Particle-induced X-ray Spectrometer (APXS) onboard Yutu rover. Three relatively young lunar soil samples in the CE-3 landing site were investigated. Previous studies suggested that these samples are a new type of basalt, not discovered yet in previous missions before the CE-3 in-situ measurements. It plays an essential role in promoting the understanding of lunar volcanic history. However, their results are deviated, and thus scrutinizing the data as per our optimized model to derive a more precise result is of necessity. In this paper, we present an optimized model for data analysis based on APXS measurements to derive the major elements concentrations. The optimized model has the advantages of reliability and being independent of calibration by ground standards. The particle size effect is applied in lunar X-ray fluorescence modeling for correction, improving the accuracy in determining the elemental concentrations for the actual measurement. Our results are distinct in the correlation plots by carrying out a comparison with previous lunar regolith samples from Apollo, Luna, and Chang'E-5 missions, indicating that the CE-3 landing site is a new region apart from previous in-situ or laboratory detection prior to the CE-3 measurements. It suggests a kind of young mare basalt with unusual petrological characteristics compared with previous samples and similar geochemical properties of CE-3 landing site and western Procellarum and Imbrium (WPI), with a signature of western Procellarum. [ABSTRACT FROM AUTHOR]

Unregulated livestock breeding and grazing can degrade grasslands and damage the ecological environment. The combination of remote sensing and artificial intelligence techniques is a more convenient and powerful means to acquire livestock information in a large area than traditional manual ground investigation. As a mainstream remote sensing platform, unmanned aerial vehicles (UAVs) can obtain high-resolution optical images to detect grazing livestock in grassland. However, grazing livestock objects in UAV images usually occupy very few pixels and tend to gather together, which makes them difficult to detect and count automatically. This paper proposes the GLDM (grazing livestock detection model), a lightweight and high-accuracy deep-learning model, for detecting grazing livestock in UAV images. The enhanced CSPDarknet (ECSP) and weighted aggregate feature re-extraction pyramid modules (WAFR) are constructed to improve the performance based on the YOLOX-nano network scheme. The dataset of different grazing livestock (12,901 instances) for deep learning was made from UAV images in the Hadatu Pasture of Hulunbuir, Inner Mongolia, China. The results show that the proposed method achieves a higher comprehensive detection precision than mainstream object detection models and has an advantage in model size. The m A P of the proposed method is 86.47%, with the model parameter 5.7 M. The average recall and average precision can be above 85% at the same time. The counting accuracy of grazing livestock in the testing dataset, when converted to a unified sheep unit, reached 99%. The scale applicability of the model is also discussed, and the GLDM could perform well with the image resolution varying from 2.5 to 10 cm. The proposed method, the GLDM, was better for detecting grassland grazing livestock in UAV images, combining remote sensing, AI, and grassland ecological applications with broad application prospects. [ABSTRACT FROM AUTHOR]

Landslide susceptibility assessment is an important means of helping to reduce and manage landslide risk. The existing studies, however, fail to examine the spatially varying relationships between landslide susceptibility and its explanatory factors. This paper investigates the spatial variation in such relationships in Liangshan, China, leveraging a spatially explicit model, namely, geographical random forest (GRF). By comparing with random forest (RF), we found that GRF achieves a higher performance with an AUC of 0.86 due to its consideration of the spatial heterogeneity among variables. GRF also provides a higher-quality landslide susceptibility map than RF by correctly placing 92.35% of the landslide points in high-susceptibility areas. The local feature importance derived from GRF allows us to understand that the impact of conditioning factors varies across space, which can provide implications for policy development by local governments to place different levels of attention on different conditioning factors in specific counties to prevent and mitigate landslides. To account for the spatial dependence among the data in the model performance assessment, we use spatial cross-validation (CV) to split the data into subsets spatially rather than randomly for model training and testing. The results show that spatial CV can effectively address the over-optimistic bias in model error evaluation. [ABSTRACT FROM AUTHOR]

As the Global Navigation Satellite System (GNSS) is widely used in all walks of life, the signal structure of satellite navigation is open, and the vulnerability to spoofing attacks is also becoming increasingly prominent, which will seriously affect the credibility of navigation, positioning, and timing (PNT) services. Satellite navigation signal authentication technology is an emerging technical means of improving civil signal anti-spoofing on the satellite navigation system side, and it is also an important development direction and research focus of the GNSS. China plans to carry out the design and development of the next-generation Beidou navigation satellite system (BDS), and one of its core goals is to provide more secure and credible PNT services. This paper first expounds on the principles and technical architecture of satellite navigation signal authentication, then clarifies the development history of satellite navigation signal authentication, and finally proposes the BDS authentication service system architecture. It will provide technical support for the construction and development of the follow-up Beidou authentication service. [ABSTRACT FROM AUTHOR]

In response to uncertainty in remotely sensed land cover products, there is continuing research on accuracy assessment and analysis. Given reference sample data, accuracy indicators are commonly estimated based on error matrices, from which areal extents of different cover types are also estimated. There are merits to explore the ways utilities of land cover products may be further enhanced beyond map face values and conventional area estimation. This paper presents an integrative method (CCAErrMat) for uncertainty characterization and utility enhancement. This works through reference-map cover type co-occurrence analyses based on error matrices localized in canonical correspondence analysis (CCA) ordination space rather than in geographic space to overcome the sparsity of reference sample data. The aforementioned co-occurrence analyses facilitate quantification of accuracy indicators, identification of correctly classified and perfectly misclassified pixels, and prediction of reference class probabilities, all at individual pixels. Moreover, these predicted reference class probabilities are used as auxiliary variables to formulate model-assisted area estimation, further enhancing map utilities. Extensions to CCAErrMat are also investigated as a way to bypass the pre-computing of map class occurrence pattern indices as candidate explanatory variables for CCAErrMat, leading to two variant methods: CCACCAErrMat and CNNCCAErrMat. A case study based in Wuhan municipality, central China was undertaken to compare the proposed method against alternative methods, including CCA-separate and CNN-separate. The advantages of CCAErrMat and CCACCAErrMat were confirmed. The proposed method is recommendable for characterizing uncertainty and enhancing utilities in land cover maps by analyzing locally constrained error matrices. The method is also cost-effective in terms of reference sample data, as requirements for them are similar to those for conventional accuracy assessments. [ABSTRACT FROM AUTHOR]

Timely and accurate crop yield information can ensure regional food security. In the field of predicting crop yields, deep learning techniques such as long short-term memory (LSTM) and convolutional neural networks (CNN) are frequently employed. Many studies have shown that the predictions of models combining the two are better than those of single models. Crop growth can be reflected by the vegetation index calculated using data from remote sensing. However, the use of pure remote sensing data alone ignores the spatial heterogeneity of different regions. In this paper, we tested a total of three models, CNN-LSTM, CNN and convolutional LSTM (ConvLSTM), for predicting the annual rice yield at the county level in Hubei Province, China. The model was trained by ERA5 temperature (AT) data, MODIS remote sensing data including the Enhanced Vegetation Index (EVI), Gross Primary Productivity (GPP) and Soil-Adapted Vegetation Index (SAVI), and a dummy variable representing spatial heterogeneity; rice yield data from 2000–2019 were employed as labels. Data download and processing were based on Google Earth Engine (GEE). The downloaded remote sensing images were processed into normalized histograms for the training and prediction of deep learning models. According to the experimental findings, the model that included a dummy variable to represent spatial heterogeneity had a stronger predictive ability than the model trained using just remote sensing data. The prediction performance of the CNN-LSTM model outperformed the CNN or ConvLSTM model. [ABSTRACT FROM AUTHOR]

Precise Point Positioning (PPP) is an official service of the BeiDou Global Navigation Satellite System (BDS-3) through the PPP-B2b signal. In this paper, we mainly focus on the long-term performance evaluation of BDS-3 PPP-B2b products and their application in time service. Since the PPP-B2b product is only available in and around China area, the arcs of PPP-B2b products are about several hours. We propose to evaluate the time datum stability by using all available satellites. Then, 557 day PPP-B2b products are collected for this experiment. The results show that there are large jumps in the GPS satellite clock time datum series. However, the BDS-3 satellite clock datum stability is almost at the same level with current Space State Representation (SSR) corrections from the International Global navigation satellite system Service (IGS). The difference between PPP-B2b GPS and BDS-3 satellite clock time datum will be absorbed into the Inter System Bias (ISB) parameter. Thus, it should be specially noted that the ISB parameter cannot be estimated as constant values if users use PPP-B2b products. In addition, the accuracy of the BDS-3 satellite clock is significantly better than that of the GPS for both the Root Mean Square Error (RMSE) and standard deviation (STD). The average Signal in Space Range Errors (SISREs) is 0.22 ns and 0.13 ns for GPS and BDS-3, respectively. The one-way timing experiment shows BDS-3 timing stability is 2.9 × 10−14@104 s. In addition, 10 baselines from 13 km to 4494 km are formed for time synchronization evaluation by using PPP-B2b products. The average RMSEs of time synchronization is from 0.46 ns to 1.58 ns and from 0.66 ns to 1.19 ns for GPS and BDS-3, respectively. As for STD, the average values are from 0.27 ns to 0.74 ns and from 0.27 ns to 0.47 ns for GPS and BDS-3, respectively. Overall, the results show that the time datum stability, accuracy, and service performance of BDS-3 PPP-B2b products has been stable over the past two years. [ABSTRACT FROM AUTHOR]

Total phosphorus (TP) concentration is high in countless small inland waterbodies in Hubei province, middle China, which is threating the water environment. However, there are almost no ground-based water quality monitoring points in small inland waterbodies, because the cost of time, labor, and money is high and it does not meet the needs of spatiotemporal dynamic monitoring. Remote sensing provides an effective tool for TP concentration monitoring spatiotemporally. However, monitoring the TP concentration of small inland waterbodies is challenging for satellite remote sensing due to the inadequate spatial resolution. Recently, unmanned aerial vehicles (UAV) have been applied to quantitatively retrieve the spatiotemporal distribution of TP concentration without the challenges of cloud cover and atmospheric effects. Although state-of-the-art algorithms to retrieve TP concentration have been improved, specific models are only used for specific water quality parameters or regions, and there are no robust and reliable TP retrieval models for small inland waterbodies at this time. To address this issue, six machine learning methods optimized by intelligent optimization algorithms (IOA-ML models) have been developed to quantitatively retrieve TP concentration combined with the reflectance of original bands and selected band combinations of UAV multispectral images. We evaluated the performances of models in terms of coefficient of determination (R2), root mean squared error (RMSE), and residual prediction deviation (RPD). The results showed that the R2 of the six IOA-ML models for training, validation, and test sets were 0.8856–0.984, 0.8054–0.8929, and 0.7462–0.9045, respectively, indicating the methods had high precision and transferability. The extreme gradient boosting optimized by genetic algorithm (GA-XGB) performed best, with the highest precision for the validation and test sets. The spatial distribution of TP concentration of each flight derived from different models had similar distribution characteristics. This paper provides a reference for promoting the intelligent and automatic level of water environment monitoring in small inland waterbodies. [ABSTRACT FROM AUTHOR]

The continuous transformation from biodiverse natural forests and mixed-use farms into monoculture rubber plantations may lead to a series of hazards, such as natural forest habitats fragmentation, biodiversity loss, as well as drought and water shortage. Therefore, understanding the spatial distribution of rubber plantations is crucial to regional ecological security and a sustainable economy. However, the spectral characteristics of rubber tree is easily mixed with other vegetation such as natural forests, tea plantations, orchards and shrubs, which brings difficulty and uncertainty to regional scale identification. In this paper, we proposed a classification method combines multi-source phenology characteristics and random forest algorithm. On the basis of optimization of input samples and features, phenological spectrum, brightness, greenness, wetness, fractional vegetation cover, topography and other features of rubber were extracted. Five classification schemes were constructed for comparison, and the one with the highest classification accuracy was used to identify the spatial pattern of rubber plantations in 2014, 2016, 2018 and 2020 in Xishuangbanna. The results show that: (1) the identification results are in consistent with field survey and rubber plantations area generally shows a first increasing and then decreasing trend; (2) the Overall Accuracy (OA) and Kappa coefficient of the proposed method are 90.0% and 0.86, respectively, with a Producer's Accuracy (PA) and User's Accuracy (UA) of 95.2% and 88.8%, respectively; (3) cross-validation was employed to analyze the accuracy evaluation indexes of the identification results: both PA and UA of the rubber plantations stay stable over 85%, with the minimum fluctuation and best stability of UA value. The OA value and Kappa coefficient were stable in the range of 0.88–0.90 and 0.84–0.86, respectively. The method proposed provides reliable results on spatial distribution of rubber, and is potentially transferable to other mountainous areas as a robust approach for rapid monitoring of rubber plantations. [ABSTRACT FROM AUTHOR]

Social media texts spontaneously produced and uploaded by the public contain a wealth of disaster information. As a supplementary data source for remote sensing, they have played an important role in disaster reduction and emergency response in recent years. However, social media also has certain flaws, such as insufficient location information, etc. This affects the efficiency of combining these data with remote sensing data. For flood disasters in particular, extensively flooded areas limit the distribution of social media data, which makes it difficult for these data to function as they should. In this paper, we propose a disaster reduction framework to solve these problems. We first used an approach that was based on search engine and lexical rules to automatically extract disaster-related location information from social media texts. Then, we combined the extracted information with the upload location of social media itself to construct location-pointing relationships. These relationships were used to build a new social network, which can be used in combination with remote sensing images for disaster analysis. The analysis integrated the advantages of social media and remote sensing. It can not only provide macro disaster information in the study area but can also assist in evaluating the disaster situation in different flooded areas from the perspective of public observation. In addition, the timeliness of social media data also improved the continuity and situational awareness of flood monitoring. A case study of the flood disaster in the Yangtze River Basin in China in 2020 was used to verify the effectiveness of the method described in this paper. [ABSTRACT FROM AUTHOR]

Near-land surface air temperature (NLSAT) is an important meteorological and climatic parameter widely used in climate change, urban heat island and environmental science, in addition to being an important input parameter for various earth system simulation models. However, the spatial distribution and the limited number of ground-based meteorological stations make it difficult to obtain a large range of high-precision NLSAT values. This paper constructs neural network, long short-term memory, bi-directional long short-term memory, support vector machine, random forest, and Gaussian process regression models by combining MODIS data, DEM data, and meteorological station data to estimate the NLSAT in China's mainland and compare them with actual NLSAT observations. The results show that there is a significant correlation between the model estimates and the actual temperature observations. Among the tested models, the random forest performed the best, followed by the support vector machine and the Gaussian process regression, then the neural network, the long short-term memory, and the bi-directional long short-term memory models. Overall, for estimates in different seasons, the best results were obtained in winter, followed by spring, autumn, and summer successively. According to different geographic areas, random forest was the best model for Northeast, Northwest, North, Southwest, and Central China, and the support vector machine was the best model for South and East China. [ABSTRACT FROM AUTHOR]

Grasshoppers can greatly interfere with agriculture and husbandry, and they will breed and grow rapidly in suitable habitats. Therefore, it is necessary to extract the distribution of the grasshopper potential habitat (GPH), analyze the spatial-temporal characteristics of the GPH, and detect the different effects of key environmental factors in the meadow and typical steppe. To achieve the goal, this study took the two steppe types of Xilingol (the Inner Mongolia Autonomous Region of China) as the research object and coupled them with the MaxEnt and multisource remote sensing data to establish a model. First, the environmental factors, including meteorological, vegetation, topographic, and soil factors, that affect the developmental stages of grasshoppers were obtained. Secondly, the GPH associated with meadow and typical steppes from 2018 to 2022 were extracted based on the MaxEnt model. Then, the spatial-temporal characteristics of the GPHs were analyzed. Finally, the effects of the habitat factors in two steppe types were explored. The results demonstrated that the most suitable and moderately suitable areas were distributed mainly in the southern part of the meadow steppe and the eastern and southern parts of the typical steppe. Additionally, most areas in the town of Gaorihan, Honggeergaole, Jirengaole, as well as the border of Wulanhalage and Haoretugaole became more suitable for grasshoppers from 2018 to 2022. This paper also found that the soil temperature in the egg stage, the vegetation type, the soil type, and the precipitation amount in the nymph stage were significant factors both in the meadow and typical steppes. The slope and precipitation in the egg stage played more important roles in the typical steppe, whereas the aspect had a greater contribution to the meadow steppe. These findings can provide a methodical guide for grasshopper control and management and for further ensuring the security of agriculture and husbandry. [ABSTRACT FROM AUTHOR]

Landslides along the Three Gorges Reservoir in China pose a threat to coastal residents and waterway safety. To reduce false positive misjudgments caused by a sudden local change in the landslide deformation curve, in this paper, we propose an effective method for predicting the deformation trend of reservoir bank landslides. We take reservoir bank landslides in the Wanzhou District of the Three Gorges Reservoir area as the research object. The Time-Series Interferometric Synthetic Aperture Radar (InSAR) method and 62 Sentinel-1A images from 2018 to 2022 were selected for landslide deformation monitoring, and the Hurst index was calculated to characterize the deformation trend. Furthermore, we propose a method for predicting the deformation trend based on the statistical distribution of deformation rates and the physical significance of the Hurst index. After the field survey and Global Positioning System (GPS) verification, the Time-Series InSAR results are shown to be reliable. We take the Sifangbei landslide as a representative case to analyze the validation results. It is found that the determined Sifangbei landslide deformation trend is consistent with the conclusions for the region. In addition, the deformation trend of a reservoir bank slope has obvious spatial and temporal differences. Changes in the reservoir water level and concentrated rainfall play roles similar to those of catalysts. The proposed method, involving the combination of Time-Series InSAR and the Hurst index, can effectively monitor deformation and predict the stability trend of reservoir bank landslides. The presented research results provide new ideas and solutions for landslide prevention and risk mitigation in reservoir areas. [ABSTRACT FROM AUTHOR]

Accurate atmospheric visibility prediction is of great significance to public transport safety. However, since it is affected by multiple factors, there still remains difficulties in predicting its heterogenous spatial distribution and rapid temporal variation. In this paper, a recursive neural network (RNN) prediction model modified with the frame-hopping transmission gate (FHTG), feature fusion module (FFM) and reverse scheduled sampling (RSS), named SwiftRNN, is developed. The new FHTG is used to accelerate training, the FFM is used for extraction and fusion of global and local features, and the RSS is employed to learn spatial details and improve prediction accuracy. Based on the ground-based monitoring data of atmospheric visibility from the China Meteorological Information Center during 1 January 2018 to 31 December 2020, the SwiftRNN model and two traditional ConvLSTM and PredRNN models are performed to predict hourly atmospheric visibility in central and eastern China at a lead of 12 h. The results show that the SwiftRNN model has better performance in the skill scores of visibility prediction than those of the ConvLSTM and PredRNN model. The averaged structural similarity (SSIM) of predictions at a lead up to 12 h is 0.444, 0.425 and 0.399 for the SwiftRNN, PredRNN and ConvLSTM model, respectively, and the averaged image perception similarity (LPIPS) is 0.289, 0.315 and 0.328, respectively. The averaged critical success index (CSI) of predictions over 1000 m fog area is 0.221, 0.205 and 0.194, respectively. Moreover, the training speed of the SwiftRNN model is 14.3% faster than the PredRNN model. It is also found that the prediction effect of the SwiftRNN model over 1000 m medium grade fog area is significantly improved along with lead times compared with the ConvLSTM and PredRNN model. All above results demonstrate the SwiftRNN model is a powerful tool in predicting atmospheric visibility. [ABSTRACT FROM AUTHOR]

The Three-River Headwaters Region (TRHR) is an important part of the ecological security barrier of the Qinghai–Tibet Plateau in China. Twenty years after the implementation of the TRHR ecological protection and construction project, the restoration degree and restoration potential of its major ecosystem services still lack clear quantification. In this paper, taking the core area of the nature reserve as the climax background of the TRHR zonal ecosystem, based on the multiple regression analysis (MLR) and model parameter control method based on the eco-geographical area, ecosystem types, and climate factors; the climax background, restoration degree, and restoration potential of TRHR's water retention (WR), soil retention (SR), and windbreak and sand fixation (WD) services were quantitatively researched. The main conclusions were as follows: (1) The evaluation method of climax background, restoration degree, and restoration potential based on fractional vegetation cover (FVC) can accurately quantify the regional differences of the restoration degree and restoration potential of TRHR's key ecosystem-regulating services. The restoration degree and restoration potential of WR and SR services showed a spatial pattern of high in the southeast and low in the northwest, and the restoration degree and restoration potential of WD services showed a spatial pattern of high in the west and low in the east, which was closely related to natural conditions such as precipitation and wind speed. (2) The proportion of restoration potential to climax background for WR, SR, and WD services were 48.38%, 62.15%, and 56.37%, respectively. (3) The implementation of the TRHR ecological project in the future should focus on the vicinity of the 400 mm dry and wet zone dividing line, as well as in the southeastern mountains, hills, and river valleys, to carry out degraded vegetation restoration and soil and water conservation measures to improve ecosystem services. Near-natural restoration measures should be considered in Zhiduo and Geermu in the western part of the TRHR, where wind erosion is high, and the restoration goals of ecological projects should be formulated in combination with local climatic conditions and restoration potential. [ABSTRACT FROM AUTHOR]

There are a variety of land cover products generated from remote-sensing images. However, misclassification errors in individual products and inconsistency among them undermine their utilities for research and other applications. While it is worth developing advanced pattern classifiers and utilizing the images of finer spatial, temporal, and/or spectral resolution for increased classification accuracy, it is also sensible to increase map classification accuracy through effective map fusion by exploiting complementarity among multi-source products over a study area. This paper presents a novel fusion method that works by weighting multiple source products based on their map-reference cover type transition probabilities, which are predicted using random forest for individual map pixels. The proposed method was tested and compared with three alternatives: consensus-based weighting, random forest, and locally modified Dempster–Shafer evidential reasoning, in a case study, over Shaanxi province, China. For this case study, three types of land cover products (GlobeLand30, FROM-GLC, and GLC_FCS30) of two nominal years (2010 and 2020) were used as the base maps for fusion. Reference sample data for model training and testing were collected following a robust stratified random sampling design that allows for augmenting reference data flexibly. Accuracy assessments show that overall accuracies (OAs) of fused land cover maps have been improved (1~9% in OAs), with the proposed method outperforming other methods by 2~8% in OAs. The proposed method does not need to have the base products' classification systems harmonized beforehand, thus being robust and highly recommendable for fusing land cover products. [ABSTRACT FROM AUTHOR]

China developed its Digital Television (DTV) standard in 2006, known as Digital Television Terrestrial Multimedia Broadcasting (DTMB), which employs time-domain synchronous orthogonal frequency division multiplexing (TDS-OFDM) as the modulation method. In contrast to Global Navigation Satellite Systems (GNSSs), DTV signals have higher transmitting power, wider coverage, larger bandwidth, and fixed transmitter location. This paper explores the positioning performance of DTMB signals, and the potential to improve GNSS positioning accuracy in urban environments. Specifically, a solution is proposed, and a software-defined radio receiver is developed for wireless localization. Without changing the current signal structure, the pseudorandom noise (PN) sequences in the signal are used for signal acquisition and carrier phase ranging. The carrier phase of the first arrived path is extracted by the least squares matching pursuit method. Both static and dynamic field tests were conducted to verify the proposed ranging and positioning method. Centimeter-level ranging accuracy was achieved in the static scenario, while meter-level ranging accuracy was achieved in the dynamic scenario. As one possible application, the proposed ranging method was combined with GPS pseudorange measurements to achieve higher accuracy position results in an urban pedestrian scenario, especially when there is only a limited number of visible satellites. [ABSTRACT FROM AUTHOR]

The Greenhouse Gas Monitoring Instrument (GMI), carried by Gaofen 5 (GF5-01), and the Hyperspectral Observation Satellite (GF5-02) were successfully launched on 9 May 2018, and September 7, 2021, respectively, and are the only passive greenhouse gas payloads in China that can regularly obtain effective detection data in-orbit at this stage. Before launch, the research team carried out much laboratory calibration work and designed an on-board calibration system based on solar radiation sources which guarantees the quantitative accuracy of the payload data to the greatest extent. In order to more effectively meet the high frequency calibration requirements over the whole life cycle of the payload, the research team carried out research using the on-track site calibration method based on digital calibration field network technology, and the obtained calibration coefficient effectively complements the laboratory and on-board calibration results. The working principle of the GMI is quite different from that of a traditional imaging payload. Spatial heterodyne spectroscopy (SHS) is used to detect the absorption spectrum of greenhouse gases, has a large field of view and is non-imaging and hyperspectral. The existing fixed-site alternative calibration methods cannot fully meet the requirements of calibration tasks. In this paper, we propose a set of global digital calibration radiation field screening criteria that can meet the characteristics of the GMI and design a method to calculate the site calibration coefficients of non-absorption spectral channels according to the characteristics of hyperspectral data. Based on the historical observation data of the GMI, the initial calibration calculation of the payload launch was carried out, and the calibration results of four spectral channels of the GMI were obtained: The calibration coefficient range of the O2 channel is 1.05–1.15, the mean value is 1.10 and the standard deviation is 2.72%; the calibration coefficient of the CO2-1 channel is 1.05–1.13, the mean value is 1.09 and the standard deviation is 2.64%; the calibration coefficient of the CH4 channel is 1.08–1.10, the mean value is 1.11 and the standard deviation is 2.73%; the calibration coefficient of the CO2-2 channel is 1.09–1.14, the mean value is 1.12 and the standard deviation is 2.93%. The above results show that the radiation performance of each channel of the GMI shows no significant attenuation during this period, that the site calibration coefficient has no significant fluctuation and that the in-orbit operation state is stable. [ABSTRACT FROM AUTHOR]

Atmospheric gravity waves (GWs) in the mesosphere-lower thermosphere (MLT) are crucial for the understanding of general circulation. However, their dynamical characteristics are hardly retrieved due to the difficulty in the high-resolution observation of wind. Therefore, this paper uses eight years (2013–2020) of meteor radar measurements in the MLT region at Mohe station (53.5°N, 122.3°E), China, to retrieve high-temporal-resolution mesospheric wind data and further evaluate the temporal variation of GW kinetic energy. As the detected meteor trails exceed 6, the wind velocity is recalculated using the least square algorithm method, significantly increasing the temporal resolution of wind from 1 h up to 5 min. This resolution is sufficiently high for the investigation of GW kinetic energy, which exhibits a high spatial-temporal variability. For instance, it is enhanced in the winter season during the period of 0200–1400 UT and in the spring season during the period of 0800–1300 UT. The similarity between the climatological characteristics of GWs in MLT and the seasonal variation of GW total energy in the troposphere, determined from high-resolution radiosondes near to Mohe station, suggests that the meteorology in the lower atmosphere could be an important source of GWs in the MLT region. [ABSTRACT FROM AUTHOR]

Background: Desertification is one of the main obstacles to global sustainable development. Monitoring, evaluating and mastering its driving factors are very important for the prevention and control of desertification. As one of the largest deserts in China, the development of desertification in Otindag Sandy Land (OSL) resulted in the reduction in land productivity and serious ecological/environmental consequences. Although many ecological restoration projects have been carried out, the vegetation restoration of OSL and the impact mechanism of climate and human activities on desertification remain unclear. Methods: Taking OSL as the research area, this paper constructs the desertification index by using the remote sensing images and meteorological and socio-economic data, between 1986 and 2016, and analyzes the spatio-temporal evolution process and driving factors of desertification by using trend analysis and spearman rank correlation. Results: The results showed that: (1) Desertification in the OSL has fluctuated greatly during the past 30 years. Desertification recovered between 1986 and 1990, expanded and increased between 1990 and 2000, reduced between 2000 and 2004, developed rapidly between 2004 and 2007, and recovered again between 2007 and 2016; (2) The desertification of OSL is dominated by a non-significant change trend, accounting for 73.27%. In the significant change trend, the area of desertification rising trend is 20.32%, which is mainly located in the north and east, and the area of declining trend is 6.41%, which is mainly located in the southwest; (3) Desertification is the result of the superposition of climate and human activities. Climate change is the main influencing factor, followed by human activities, and the superposition effects of the two are spatio-temporal differences. Conclusions: These results shed light on the development of desertification in OSL and the relative importance and complex interrelationship between human activities and climate in regulating the process of desertification. Based on this, we suggest continuing to implement the ecological restoration policy and avoid the destruction of vegetation by large-scale animal husbandry in order to improve the situation of desertification. [ABSTRACT FROM AUTHOR]

Landslide disasters cause serious property losses and casualties every year. Landslide displacement prediction is fundamental for mitigating landslide disasters. Several approaches have been used to predict landslide displacement, yet a more accurate and reliable displacement prediction still has a poor understanding of landslide early warning systems for landslide mitigation, due to limited data and mutational displacements. To boost the robustness and accuracy of landslide displacement prediction, this paper assembled a new hybrid model containing the local mean decomposition (LMD), innovations state space models for exponential smoothing (ETS), and the temporal convolutional network (TCN). The proposed model, which is based on over 10 years of long-term time series monitoring GPS data, was tested on the selected case—stepwise Baijiabao landslide in the Three Gorges Reservoir area of China (TGRA) was tested by the proposed model. The results presented that the LMD–ETS–TCN model has the best performance in comparison with other benchmark models. Compared with autoregressive integrated moving average (ARIMA), support vector regression (SVR), and long short-term memory neural network (LSTM), the accuracy was noticeably improved by an average of 40.9%, 46.2%, and 22.1%, respectively. The robustness and effectiveness of the presented approach are attested, and it has discernible improvements for landslide displacement prediction. [ABSTRACT FROM AUTHOR]

Northeast China is a prominent base for commercial grain production nationwide. Soil erosion, a primary cause of land degradation and grain yield decrease, has become an imminent issue and is still not well documented in Northeast China. Thus, a comprehensive assessment of soil erosion in Northeast China is essential for deepening our understanding of various geological and agricultural issues, such as control of regional water and soil losses, anti-degeneration attempts on black soil, preservation of land fertility, and safeguarding of national food security. Based on the Revised Universal Soil Loss Equation (RUSLE) and the Revised Wind Erosion Equation (RWEQ) models, this paper comprehensively assessed the water and wind erosion in Northeast China from 2000 to 2020 and analyzed the current situation, as well as the spatial and temporal evolution of soil erosion. The results suggest the following: (1) The degree of soil erosion in Northeast China was mainly slight, and water erosion was more severe than wind erosion. Water and wind erosion in bare land and grassland were more intensive than in cropland and forests. The Liao River Plain (LRP) has undergone relatively intensive water erosion, while the wind erosion in the Greater Kinggan Mountains Region (GKMR) was more intensive than in other sub-regions. (2) A slight intensifying trend of water erosion could be observed in Northeast China from 2000 to 2020, where the area of slight water erosion decreased and that of light and intensive water erosion increased. The water erosion in the Changbai Mountain Region (CBMR), the Sanjiang Plain (SJP), and the Songnen Plain (SNP) intensified, while the LRP has undergone slower water erosion than before. The water erosion in bare land and cropland intensified, while the water erosion in grassland and forests slowed down. Compared to the first decade (2000–2010), the second decade (2010–2020) in the timespan of study had a reversed trend of water erosion from intensifying to moderating, which means water erosion was alleviated. (3) A moderating trend in wind erosion could be found in Northeast China from 2000 to 2020, where the area of slight wind erosion increased and that of light, moderate, and intensive wind erosion decreased. The wind erosion in the LRP showed a pronounced decrease, and the wind erosion in bare land and cropland also considerably decreased. Compared to the first decade, the amount of wind erosion in the second decade decreased by 18.2%, but the rate in the second decade decreased slowly or even increased. These two facts indicate that wind erosion in Northeast China has alleviated, but this trend is gradually slowing down. Soil erosion is caused by multiple factors, such as climate, topography, soil, and human activities. This study provides important implications for our understanding of soil erosion control and management in Northeast China. In sub-regions with severe erosion, such as the LRP and the GKMR, we can adopt methods such as zero tillage, cross ridge tillage, and straw mulching according to the local characteristics of soil erosion to slow down the process. [ABSTRACT FROM AUTHOR]

The construction of large-scale hydropower stations could solve the problem of China's power and energy shortages. However, the construction of hydropower stations requires reservoir water storage. Artificially raising the water level by several tens of meters or even hundreds of meters will undoubtedly change the hydrogeological conditions of an area, which will lead to surface deformation near the reservoir. In this paper, we first used SBAS-InSAR technology to monitor the surface deformation near the Xiluodu reservoir area for various data and analyzed the surface deformation of the Xiluodu reservoir area from 2014 to 2019. By using the 12 ALOS2 ascending data, the 100 Sentinel-1 ascending data, and the 97 Sentinel-1 descending data, the horizontal and vertical deformations of the Xiluodu reservoir area were obtained. We found that the Xiluodu reservoir area is mainly deformed along the vertical shore, with a maximum deformation rate of 250 mm/a, accompanied by vertical deformation, and the maximum deformation rate is 60 mm/a. Furthermore, by analyzing the relationship between the horizontal deformation sequence, the vertical deformation sequence, and the impoundment, we found the following: (1) Since the commencement of Xiluodu water storage, the vertical shore direction displacement has continued to increase, indicating that the deformation caused by the water storage is not due to the elastic displacement caused by the load, but by irreversible shaping displacement. According to its development trend, we speculate that the vertical shore direction displacement will continue to increase until it eventually stabilizes; (2) Vertical displacement increases rapidly in the initial stage of water storage; after two water-storage cycles, absolute settlement begins to slow down in the vertical direction, but its deformation still changes with the change in the storage period. [ABSTRACT FROM AUTHOR]

It has been widely certified that hyperspectral images can be effectively used to monitor soil organic matter (SOM). Though numerous bands reveal more details in spectral features, information redundancy and noise interference also come accordingly. Due to the fact that, nowadays, prevailing dimensionality reduction methods targeted to hyperspectral images fail to make effective band selections, it is hard to capture the spectral features of ground objects quickly and accurately. In this paper, to solve the inefficiency and instability of hyperspectral feature selection, we proposed a feature selection framework named reinforcement learning for feature selection in hyperspectral regression (RLFSR). Specifically, the Markov Decision Process (MDP) was used to simulate the hyperspectral band selection process, and reinforcement learning agents were introduced to improve model performance. Then two spectral feature evaluation methods were introduced to find internal relationships between the hyperspectral features and thus comprehensively evaluate all hyperspectral bands aimed at the soil. The feature selection methods—RLFSR-Net and RLFSR-Cv—were based on pre-trained deep networks and cross-validation, respectively, and achieved excellent results on airborne hyperspectral images from Yitong Manchu Autonomous County in China. The feature subsets achieved the highest accuracy for most inversion models, with inversion R2 values of 0.7506 and 0.7518, respectively. The two proposed methods showed slight differences in spectral feature extraction preferences and hyperspectral feature selection flexibilities in deep reinforcement learning. The experiments showed that the proposed RLFSR framework could better capture the spectral characteristics of SOM than the existing methods. [ABSTRACT FROM AUTHOR]

Landslides are one of the extremely high-incidence and serious-loss geological disasters in the world, and the early monitoring and warning of landslides are of great importance. The Cheyiping landslide, located in western Yunnan Province, China, added many cracks and dislocations to the surface of the slope due to the severe seasonal rainfall and rise of the water level, which seriously threaten the safety of residents and roads located on the body and foot of the slope. To investigate the movement of the landslide, this paper used Sentinel-1A SAR data processed by time-series interferometric synthetic aperture radar (InSAR) technology to monitor the long-time surface deformation. The landslide boundary was defined, then the spatial distribution of landslide surface deformation from 5 January 2018 to 27 December 2021 was obtained. According to the monthly rainfall data and the temporal deformation results, the movement of the landslide was highly correlated with seasonal rainfall, and the Cheyiping landslide underwent seasonal sectional accelerated deformation. Moreover, the water level change of the Lancang River caused by the water storage of the hydropower station and seasonal rainfall accelerates the deformation of the landslide. This case study contributes to the interpretation of the slow deformation mechanism of the Cheyiping landslide and early hazard warning. [ABSTRACT FROM AUTHOR]

In line with the United Nations Sustainable Development Goal (SDG) 6, the main goal of the Special Issue on "Remote sensing for water resources and environmental management" was to solicit papers from a diverse range of scientists around the world on the use of cutting-edge remote sensing technologies to assess and monitor freshwater quality, quantity, availability, and management to ensure water security. Special consideration was given to scientific manuscripts that covered, but were not limited to, the development of geospatial techniques and remote sensing applications for detecting, quantifying, and monitoring freshwater water resources, identifying potential threats to water resources and agriculture, as well as other themes related to water resources and environmental management at various spatial scales. The Special Issue attracted over thirteen peer-reviewed scientific articles, with the majority of manuscripts originating from China. Most of the studies made use of satellite datasets, ranging from coarse spatial resolution data, such as the Gravity Recovery and Climate Experiment (GRACE) and GRACE Follow-On (GRACE-FO), to medium spatial resolution data, such as the Landsat series, ERA5, Modern-Era Retrospective Analysis for Research and Application Land version 2 reanalysis product (MERRA2), CLSM and NOAH ET, and MODIS (Moderate Resolution Imaging Spectroradiometer). Google Earth Engine (GEE) data, together with big data processing techniques, such as the remote sensing-based energy balance model (ALEXI/DisALEXI approach) and the STARFM data fusion technique, were used for analyzing geospatial datasets. Overall, this Special Issue demonstrated significant knowledge gaps in various big data image processing techniques and improved computing processes in assessing and monitoring water resources and the environment at various spatial and temporal scales. [ABSTRACT FROM AUTHOR]

The third generation of China's BeiDou Navigation Satellite System (BDS-3) began to provide global service at the end of 2018, and the completion of BDS was announced in July 2020, which includes GEO (Geostationary Earth Orbit), IGSO (Inclined Geosynchronous orbit), and MEO (Medium Earth Orbit) satellites. The resulting BDS orbits vary due to the inconsistent alignment strategies used by different analysis centers. Therefore, it is necessary to study the method of determining the BDS-3 orbit products combined from different analysis centers. In this research, the accuracy of the combined orbits for BDS-3 and other GNSS systems is evaluated and analyzed. To verify the reliability of the orbit combination method proposed in this paper, the GPS orbit is first selected for verification. Compared to the analysis centers, the mean Signal in Space User Ranging Error (SISURE) for GPS combined orbits is significantly reduced, and the mean SISURE of combined orbits for Block IIF, Block IIR, and Block III is 4.15 mm, 5.43 mm, and 5.63 mm, respectively. This demonstrates the effectiveness of the orbit combination method in this research. Besides, the accuracy of the combined orbits is improved by the ERP correction, and the mean RMS of the without Earth rotation Parameters (ERP) correction orbits and with ERP correction orbits is 4.78 mm and 4.53 mm, respectively. This demonstrates that orbit consistency corrections should be considered when performing orbit combinations. Compared to the GFZ orbits, the accuracy of the combined orbits has improved for GPS, GLONASS, GALILEO, and BDS is 8.2%, 9.9%, 9.9%, and 5.5%, respectively. It shows that the orbit combination method improves the orbital accuracy compared to the individual analysis center orbits. The mean RMS of the combined orbits for GPS, GLONASS, GALILEO, BDS MEO, and BDS IGSO is 1.7 cm, 2.61 cm, 2.52 cm, 2.59 cm, and 4.90 cm, respectively. The results demonstrate that the accuracy of the combined orbit for the BDS-3 MEO satellite is already similar to other systems; an orbit combination also available for the BDS-3 satellite. [ABSTRACT FROM AUTHOR]

The acceleration of urbanization has significantly impacted the changing regional thermal environment, leading to a series of ecological and environment-related problems. A scientific evaluation of the urban thermal security pattern (TSPurban) strongly benefits the planning and layout of sustainable development and the construction of comfortable human settlements. To analyze the characteristics of the TSPurban under cross-regional differences and provide targeted solutions to mitigate the urban heat island effect in later stages, the logical system research framework of the TSPurban based on the "construction–evaluation–optimization" model was explored using reverse thinking. This study selected the Wuhan metropolitan area in China as the research object. First, a morphological spatial pattern analysis (MSPA) model was used to extract the top 30 core heat island patches, and Conefor 2.6 software was used for connection analysis to evaluate their importance. Second, based on the characteristics of various land cover types, the friction (cost) map of surface urban heat island (SUHI) diffusion was simulated. The spatial attributes of the heat island resistance surface were examined using a standard deviation ellipse and hot spot analysis. Finally, this paper used circuit theory to find 56 low-cost heat island links (corridors) and circuit scape software to find widely distributed vital nodes. The optimization of the TSPurban network was then investigated using a reverse thinking process. Heat island patches, corridors, and vital nodes are among the crucial components of the TSPurban. By obstructing corridor links and disturbing important nodes, it is possible to appropriately and proficiently reduce the TSPurban network's connection efficiency and stability, which will have a positive influence on regional climate mitigation and the heat island effect. [ABSTRACT FROM AUTHOR]

Aeromagnetic gradient data have higher horizontal resolution on shallow sources, a magnetic anomaly that can better reflect the features of deeper sources. Therefore, we used a joint survey of aeromagnetic and gradient data to obtain the distribution of sources with different depths. In this paper, we propose an intersection constraint weighting (ICW) method based on aeromagnetic and gradient data for original and gradient anomalies with inconsistent high-low variation characteristics. The ICW method can effectively improve the resolution of inversion results and can more accurately obtain the distribution of magnetic bodies via cross-gradient by gradually adding a gradient component and applying a normalized property weighting function. Our theoretical model tests indicate that the distribution of the recovered magnetic susceptibility model of the ICW method was similar to that of the true model. In addition, the anomaly containing noise with different signal-to-noise ratios verified that the ICW method had a stronger anti-noise ability than other methods. We also inverted real data in the Zhurihe area of the Inner Mongolia Autonomous Region in northern China. The inversion result showed that the main trend of high magnetic bodies was in the northeast direction, that the shallowest depth of high magnetic bodies was 100 m, and that the greatest depth was 960 m. [ABSTRACT FROM AUTHOR]

Coal seam mining in the gully area easily causes ground cracks and even induces landslides, which endanger the safety of mining areas. In this paper, combined with the mining conditions of a mining area in southern Shanxi Province, China, ground crack mapping, crack width dynamic monitoring, and the numerical simulation method are used to study the static and dynamic evolution law and the formation mechanism of ground cracks in the gully area. The research shows that ground cracks mainly include dynamic in-plane cracks and boundary cracks. The dynamic in-plane cracks show the characteristics of "opening first and closing later". The boundary cracks show the characteristics of "only opening and not closing". It is found that the closure of the dynamic in-plane cracks will decrease (compared with plain areas). The development of ground cracks experiences three stages: the initial formation stage, the dynamic development stage, and the gradually stable stage. The "goaf–surface" structure model and force chain arch structure model are established to more intuitively analyze the formation mechanism of ground cracks. The research results have a specific reference value for preventing ground disasters caused by underground coal mining and land ecological restoration. [ABSTRACT FROM AUTHOR]

Soil freeze depth variations greatly affect energy exchange, carbon exchange, ecosystem diversity, and the water cycle. Given the importance of these processes, obtaining freeze depth data over large scales is an important focus of research. This paper presents a simple empirical algorithm to estimate the maximum seasonally frozen depth (MSFD) of seasonally frozen ground (SFG) in snowy regions. First, the potential influences of driving factors on the MSFD variations were quantified in the baseline period (1981–2010) based on the 26 meteorological stations within and around the SFG region of Heilongjiang province. The three variables that contributed more than 10% to MSFD variations (i.e., air freezing index, annual mean snow depth, and snow cover days) were considered in the analysis. A simple multiple linear regression to estimate soil freeze depth was fitted (1981–2010) and verified (1975–1980 and 2011–2014) using ground station observations. Compared with the commonly used simplified Stefan solution, this multiple linear regression produced superior freeze depth estimations, with the mean absolute error and root mean square error of the station average reduced by over 20%. By utilizing this empirical algorithm and the ERA5-Land reanalysis dataset, the multi-year average MSFD (1981–2010) was 132 cm, ranging from 52 cm to 186 cm, and MSFD anomaly exhibited a significant decreasing trend, at a rate of −0.38 cm/decade or a net change of −28.14 cm from 1950–2021. This study provided a practical approach to model the soil freeze depth of SFG over a large scale in snowy regions and emphasized the importance of considering snow cover variables in analyzing and estimating soil freeze depth. [ABSTRACT FROM AUTHOR]

The Mars Surface Composition Detector (MarSCoDe) carried by the Zhurong rover of China's Tianwen-1 mission uses Laser-Induced Breakdown Spectroscopy (LIBS) to detect and analyze the material composition on Martian surfaces. As one extraterrestrial remote LIBS system, it is necessary to adopt effective and reliable preprocessing methods to correct the spectral drift caused by the changes in environmental conditions, to ensure the analysis accuracy of LIBS scientific data. This paper focuses on the initial spectral drift correction and estimates the accuracy of on-board wavelength calibration on the LIBS calibration target measured by the MarSCoDe LIBS. There may be two cases during the instrument launch and landing, as well as the long-term operation: (a) the initial wavelength calibration relationship can still apply to the on-board LIBS measurement; and (b) the initial wavelength calibration relationship has been changed, and a new on-board calibration is needed to establish the current relationship. An approach of matching based on global iterative registration (MGR) is presented in respect to case (a). It is also compared with the approach of particle swarm optimization (PSO) for case (b). Furthermore, their accuracy is estimated with the comparison to the National Institute of Standards and Technology (NIST) database. The experimental results show that the proposed approach can effectively correct the drift of the on-board LIBS spectrum. The the root-mean-square error (RMSE) of the internal accord accuracy for three channels is 0.292, 0.223 and 0.247 pixels, respectively, compared with the corrected Ti-alloy spectrum and the NIST database, and the RMSE of the external accord accuracy is 0.232, 0.316 and 0.229 pixels, respectively, for other samples. The overall correction accuracy of the three channels is better than one-third of the sampling interval. [ABSTRACT FROM AUTHOR]