Search

This work presents a "half-etch" horizontal slot waveguide design based on SiN, where only the upper SiN layer is etched to form a strip that confines the mode laterally. The numerical modeling, fabrication, and characterization of passive waveguiding components are described. This novel slot waveguide structure was designed with on-chip light amplification in mind, for example with an Er-doped oxide spacer layer. Proof-of-concept racetrack resonators were fabricated and characterized, showing quality factors up to 50,000 at critical coupling and residual losses of 4 dB/cm at wavelengths away from the N-H bond absorption peak in SiN, demonstrating the high potential of these horizontal slot waveguides for use in active integrated photonics.

We propose a microring resonator (MRR) optical switch based on III-V/Si hybrid metal-oxide-semiconductor (MOS) optical phase shifter with an ultrathin InP membrane. By reducing the thickness of the InP membrane, we can reduce the insertion loss of the phase shifter, resulting in a high-quality-factor (Q-factor) MRR switch. By optimizing the device structure using numerical analysis, we successfully demonstrated a proof-of-concept MRR optical switch. The optical switch exhibits 0.3 pW power consumption for switching, applicable to power-efficient, thermal-crosstalk-free, Si programmable photonic integrated circuits (PICs) based on wavelength division multiplexing (WDM).

Recently, erbium-doped integrated waveguide devices have been extensively studied as a CMOS-compatible and stable solution for optical amplification and lasing on the silicon photonic platform. However, erbium-doped waveguide technology still remains relatively immature when it comes to the production of competitive building blocks for the silicon photonics industry. Therefore, further progress is critical in this field to answer the industry's demand for infrared active materials that are not only CMOS-compatible and efficient, but also inexpensive and scalable in terms of large volume production. In this work, we present a novel and simple fabrication method to form cost-effective erbium-doped waveguide amplifiers on silicon. With a single and straightforward active layer deposition, we convert passive silicon nitride strip waveguide channels on a fully industrial 300 mm photonic platform into active waveguide amplifiers. We show net optical gain over sub-cm long waveguide channels that also include grating couplers and mode transition tapers, ultimately demonstrating tremendous progress in developing cost-effective active building blocks on the silicon photonic platform.

Dual-comb spectroscopy using a silicon Mach-Zehnder modulator is reported for the first time. First, the properties of frequency combs generated by silicon modulators are assessed in terms of tunability, coherence, and number of lines. Then, taking advantage of the frequency agility of electro-optical frequency combs, a new technique for fine resolution absorption spectroscopy is proposed, named frequency-tuning dual-comb spectroscopy, which combines dual-comb spectroscopy and frequency spacing tunability to measure optical spectra with detection at a unique RF frequency. As a proof of concept, a 24 GHz optical bandwidth is scanned with a 1 GHz resolution.

The availability of low-loss optical interfaces to couple light between standard optical fibers and high-index-contrast silicon waveguides is essential for the development of chip-integrated nanophotonics. Input and output couplers based on diffraction gratings are attractive coupling solutions. Advanced grating coupler designs, with Bragg or metal mirror underneath, low- and high-index overlays, and multi-level or multi-layer layouts, have proven less useful due to customized or complex fabrication, however. In this work, we propose a rather simpler in design of efficient off-chip fiber couplers that provide a simulated efficiency up to 95% (-0.25 dB) at a wavelength of 1.55 µm. These grating couplers are formed with an L-shaped waveguide profile and synthesized subwavelength grating metamaterials. This concept jointly provides sufficient degrees of freedom to simultaneously control the grating directionality and out-radiated field profile of the grating mode. The proposed chip-to-fiber couplers promote robust sub-decibel coupling of light, yet contain device dimensions (> 120 nm) compatible with standard lithographic technologies presently available in silicon nanophotonic foundries. Fabrication imperfections are also investigated. Dimensional offsets of ± 15 nm in shallow-etch depth and ± 10 nm in linewidth's and mask misalignments are tolerated for a 1-dB loss penalty. The proposed concept is meant to be universal, which is an essential prerequisite for developing reliable and low-cost optical couplers. We foresee that the work on L-shaped grating couplers with sub-decibel coupling efficiencies could also be a valuable direction for silicon chip interfacing in integrated nanophotonics.

The successful integration of capacitive phase shifters featuring a p-type strained SiGe layer in a 300 mm silicon photonics platform is presented. The phase shift is evaluated with a voltage swing of only 0.9 V pp , compatible with CMOS technology. A good correlation is shown between the phase shift efficiency from 10 to 60°/mm and the capacitive oxide thickness varying from 15 to 4 nm. Corresponding insertion losses are as low as 3 dB/mm thanks to the development of low loss poly-silicon and to a careful design of the doped layers within the waveguide. The thin SiGe layer brings an additional 20% gain in efficiency due to higher hole efficiency in strained SiGe.

Optical properties of poly-silicon material are investigated to be integrated in new silicon photonics devices, such as capacitive modulators. Test structure fabrication is done on 300 mm wafer using LPCVD deposition: 300 nm thick amorphous silicon layers are deposited on thermal oxide, followed by solid phase crystallization anneal. Rib waveguides are fabricated and optical propagation losses measured at 1.31 µm. Physical analysis (TEM ASTAR, AFM and SIMS) are used to assess the origin of losses. Optimal deposition and annealing conditions have been defined, resulting in 400 nm-wide rib waveguides with only 9.2-10 dB/cm losses.

Germanium photodetectors are considered to be mature components in the silicon photonics device library. They are critical for applications in sensing, communications, or optical interconnects. In this work, we report on design, fabrication, and experimental demonstration of an integrated waveguide PIN photodiode architecture that calls upon lateral double Silicon/Germanium/Silicon (Si/Ge/Si) heterojunctions. This photodiode configuration takes advantage of the compatibility with contact process steps of silicon modulators, yielding reduced fabrication complexity for transmitters and offering high-performance optical characteristics, viable for high-speed and efficient operation near 1.55 μm wavelengths. More specifically, we experimentally obtained at a reverse voltage of 1V a dark current lower than 10 nA, a responsivity higher than 1.1 A/W, and a 3 dB opto-electrical cut-off frequency over 50 GHz. The combined benefits of decreased process complexity and high-performance device operation pave the way towards attractive integration strategies to deploy cost-effective photonic transceivers on silicon-on-insulator substrates.

In this work, a 25 Gb ps silicon push-pull Mach-Zehnder modulator operating in the O-Band (1260 nm - 1360 nm) of optical communications and fabricated on a 300 mm platform is presented. The measured modulation efficiency (VπLπ) was comprised between 0.95 V cm and 1.15 V cm, which is comparable to the state-of-the-art modulators in the C-Band, that enabled its use with a driving voltage of 3.3 V pp , compatible with BiCMOS technology. An extinction ratio of 5 dB and an on-chip insertion losses of 3.6 dB were then demonstrated at 25 Gb ps.

In this paper, the 200mm silicon-on-insulator (SOI) platform is used to demonstrate the monolithic co-integration of hybrid III-V/silicon distributed Bragg reflector (DBR) tunable lasers and silicon Mach-Zehnder modulators (MZMs), to achieve fully integrated hybrid transmitters for silicon photonics. The design of each active component, as well as the fabrication process steps of the whole architecture are described in detail. A data transmission rate up to 25Gb/s has been reached for transmitters using MZMs with active lengths of 2mm and 4mm. Extinction ratios of respectively 2.9dB and 4.7dB are obtained by applying drive voltages of 2.5V peak-to-peak on the MZMs. 25Gb/s data transmission is demonstrated at 1303.5nm and 1315.8nm, with the possibility to tune the operating wavelength by up to 8.5nm in each case, by using metallic heaters above the laser Bragg reflectors.