Search

The traditional predictive method cannot fully reflect the complex nonlinear characteristics and regularities of automobile and parts sales data, so the prediction precision is not high. The purpose of this paper is to propose the gray GM(1,1) nonlinear periodic predictive model by introducing the seasonal variation index to improve predictive accuracy of the single GM(1,1) model. Firstly, the paper analyzes concept of GM(1,1) and then proposes the gray GM(1,1) nonlinear periodic predictive model to forecast automobile parts sales. The model algorithm used gray theory and accumulated technology to generate new data and set up unified differential equations to find the fitting curve of automobile parts sales prediction by the seasonal variation index to remove random elements. Lastly, the gray GM(1,1) nonlinear periodic predictive model is used for empirical analysis; the result of example shows that the model proposed in the paper is feasible. The superiority of the proposed predictive model compared with the single gray GM(1,1) model is demonstrated. The reliability of this model is experienced by the accuracy test, which provides a theoretical guidance for the prediction of automobile part sales. And the average relative error is reduced by 8.52% compared with the single GM(1,1) model.

One of the most popular statistical models is a low-order polynomial response surface model, i.e., a polynomial of first order or second order. These polynomials can be used for global metamodels in weakly nonlinear simulation to approximate their global tendency and local metamodels in response surface methodology (RSM), which has been studied in various applications in engineering design and analysis. The order of the selected polynomial determines the number of sampling points (input combinations) and the resulting accuracy (validity, adequacy). This paper derives a novel method to obtain an accurate high-order polynomial while requiring fewer sampling points. This method uses a two-stage procedure such that the second stage modifies the low-order polynomial estimated in the first stage; this second stage does not require new points. This paper evaluates the performance of the method numerically by using several test functions. These numerical results show that the proposed method can provide more accurate predictions than the traditional method.

This paper presents a new solubility optimal system to improve the efficiency of supercritical fluid extraction (SFE). The major contribution is a nonlinear temperature-pressure decoupling model constructed with unequal-interval grey optimal models (UEIGOMs) and Peng-Robinson models (PRMs). The linear parts of temperature and pressure process can be constructed with UEIGOM, respectively. The nonlinear parts of temperature and pressure process can be described by PRMs, respectively. The whole nonlinear model cannot be input-output decoupled resulting from the singularity of decoupling matrix for PRM. This problem on input-output nondecoupling can be transformed to the problem on disturbance decoupling for a class of MIMO nonlinear systems. Therefore, the whole nonlinear coupling model can be disturbance decoupled. Furthermore, solubility optimal method is presented in the paper; it can calculate the optimal pressure according to the given temperature, namely, optimal working points, to maximize solubility for SFE process. The feasibility, effectiveness, and practicality of the proposed nonlinear temperature-pressure decoupling model constructed with UEIGOMs and PRMs are verified by SFE experiments in biphenyl. Experiments using the designed solubility optimal system are carried out to demonstrate the effectiveness in control scheme, simplicity in structure, and flexibility in implementation for the proposed solubility optimal system based on a new nonlinear temperature-pressure coupling model constructed with UEIGOMs and PRMs.

This paper deals with a design problem of an adaptive robust controller for a class of nonlinear systems with specified input saturations. For the nonlinear system under consideration, the nonlinearity means unknown perturbations and satisfies the matching condition. In this paper, we show that sufficient conditions for the existence of the proposed adaptive robust controller giving consideration to input saturations are given in terms of linear matrix inequalities (LMIs). Finally, simple illustrative examples are shown.

Methods of utilizing independent component analysis (ICA) give little guidance about practical considerations for separating single-channel real-world data, in which most of them are nonlinear, nonstationary, and even chaotic in many fields. To solve this problem, a three-step method is provided in this paper. In the first step, the measured signal which is assumed to be piecewise higher order stationary time series is introduced and divided into a series of higher order stationary segments by applying a modified segmentation algorithm. Then the state space is reconstructed and the single-channel signal is transformed into a pseudo multiple input multiple output (MIMO) mode using a method of nonlinear analysis based on the high order statistics (HOS). In the last step, ICA is performed on the pseudo MIMO data to decompose the single channel recording into its underlying independent components (ICs) and the interested ICs are then extracted. Finally, the effectiveness and excellence of the higher order single-channel ICA (SCICA) method are validated with measured data throughout experiments. Also, the proposed method in this paper is proved to be more robust under different SNR and/or embedding dimension via explicit formulae and simulations.

This paper focuses on the filtering problems of nonlinear discrete-time stochastic dynamic systems, such as the model simplification, noise characteristics uncertainty, initial conditions uncertainty, or system parametric variation. Under these circumstances, the measurements of system have one sampling time random delay. A new method, that is, strong tracking filtering algorithm of randomly delayed measurements (STF/RDM) for nonlinear systems based on recursive operating by analytical computation and first-order linear approximations, is proposed; a principle of extended orthogonality is presented as a criterion of designing the STF/RDM, and through the residuals between available and predicted measurements, the formula of fading factor is obtained. Under the premise of using the extended orthogonality principle, STF/RDM proposed in this paper can adjust the fading factor online via calculating the covariance of residuals, and then the gain matrices of the STF/RDM adjust in real time to enhance the performance of the proposed method. Lastly, in order to prove that the performance of STF/RDM precedes existing EKF method, the experiment of tracking maneuvering aircraft is carried out.

The one-dimensional continuous genetic algorithm (CGA) previously developed by the principal author is extended and enhanced to deal with two-dimensional spaces in this paper. The enhanced CGA converts the partial differential equations into algebraic equations by replacing the derivatives appearing in the differential equation with their proper finite difference formula in 2D spaces. This optimization methodology is then applied for the solution of steady-state two-dimensional Stokes and nonlinear Navier Stokes problems. The main advantage of using CGA for the solution of partial differential equations is that the algorithm can be applied to linear and nonlinear equations without any modification in its structure. A comparison between the results obtained using the 2D CGA and the known Galerkin finite element method using COMSOL is presented in this paper. The results showed that CGA has an excellent accuracy as compared to other numerical solvers.

For nonlinear discrete-time stochastic systems, a fuzzy controller design methodology is developed in this paper subject to state variance constraint and passivity constraint. According to fuzzy model based control technique, the nonlinear discrete-time stochastic systems considered in this paper are represented by the discrete-time Takagi-Sugeno fuzzy models with multiplicative noise. Employing Lyapunov stability theory, upper bound covariance control theory, and passivity theory, some sufficient conditions are derived to find parallel distributed compensation based fuzzy controllers. In order to solve these sufficient conditions, an iterative linear matrix inequality algorithm is applied based on the linear matrix inequality technique. Finally, the fuzzy stabilization problem for nonlinear discrete ship steering stochastic systems is investigated in the numerical example to illustrate the feasibility and validity of proposed fuzzy controller design method.

This paper presents two methods for dual-rate sampled-data nonlinear output-error systems. One method is the missing output estimation based stochastic gradient identification algorithm and the other method is the auxiliary model based stochastic gradient identification algorithm. Different from the polynomial transformation based identification methods, the two methods in this paper can estimate the unknown parameters directly. A numerical example is provided to confirm the effectiveness of the proposed methods.

Spheroid disturbance of input data brings great challenges to support vector regression; thus it is essential to study the robust regression model. This paper is dedicated to establish a robust regression model which makes the regression function robust against disturbance of data and system parameter. Firstly, two theorems have been given to show that the robust linearε-support vector regression problem could be settled by solving the dual problems. Secondly, it has been focused on the development of robust support vector regression algorithm which is extended from linear domain to nonlinear domain. Finally, the numerical experiments result demonstrates the effectiveness of the models and algorithms proposed in this paper.

This paper considers controller parameterization method ofH∞control for polynomial Hamiltonian systems (PHSs), which involves internal stability and external disturbance attenuation. The aims of this paper are to design a controller with parameters to insure that the systems areH∞stable and propose an algorithm for solving parameters of the controller with symbolic computation. The proposed parameterization method avoids solving Hamilton-Jacobi-Isaacs equations, and thus the obtained controllers with parameters are relatively simple in form and easy in operation. Simulation with a numerical example shows that the controller is effective as it can optimizeH∞control by adjusting parameters. All these results are expected to be of use in the study ofH∞control for nonlinear systems with perturbations.

The dissipative delay-feedback control problems for nonlinear stochastic delay systems (NSDSs) based on dissipativity analysis are studied in this paper. Based on the Lyapunov stability theory and stochastic analysis technique, both delay-independent and delay-dependent dissipativity criteria are established as linear matrix inequalities- (LMIs-) based feasibility tests. The obtained results in this paper for the nominal systems include the available results onH∞approach and passivity for stochastic delay systems as special cases. The delay-dependent feedback controller is designed by considering the relationship among the time-varying delay, its lower and upper bound, and its differential without ignoring any terms, which effectively reduces the conservative. A numerical example is given to illustrate the theoretical developments.

This paper studies the stabilization problem for a class of unified chaotic systems subject to uncertainties and input nonlinearity. Based on the sliding mode control theory, we present a new method for the sliding mode controller design and the control law algorithm for such systems. In order to achieve the goal of stabilization unified chaotic systems, the presented controller can make the movement starting from any point in the state space reach the sliding mode in limited time and asymptotically reach the origin along the switching surface. Compared with the existing literature, the controller designed in this paper has many advantages, such as small chattering, good stability, and less conservative. The analysis of the motion equation and the simulation results all demonstrate that the method is effective.

This paper presents a method determining neighborhoods of the image pixels automatically in adaptive denoising. The neighborhood is named stationary neighborhood (SN). In this method, the noisy image is considered as an observation of a nonlinear time series (NTS). Image denoising must recover the true state of the NTS from the observation. At first, the false neighbors (FNs) in a neighborhood for each pixel are removed according to the context. After moving the FNs, we obtain an SN, where the NTS is stationary and the real state can be estimated using the theory of stationary time series (STS). Since each SN of an image pixel consists of elements with similar context and nearby locations, the method proposed in this paper can not only adaptively find neighbors and determine size of the SN according to the characteristics of a pixel, but also be able to denoise while effectively preserving edges. Finally, in order to show the superiority of this algorithm, we compare this method with the existing universal denoising algorithms.

This paper presents a positional FEM formulation to deal with geometrical nonlinear dynamics of shells. The main objective is to develop a new FEM methodology based on the minimum potential energy theorem written regarding nodal positions and generalized unconstrained vectors not displacements and rotations. These characteristics are the novelty of the present work and avoid the use of large rotation approximations. A nondimensional auxiliary coordinate system is created, and the change of configuration function is written following two independent mappings from which the strain energy function is derived. This methodology is called positional and, as far as the authors' knowledge goes, is a new procedure to approximated geometrical nonlinear structures. In this paper a proof for the linear and angular momentum conservation property of the Newmark algorithm is provided for total Lagrangian description. The proposed shell element is locking free for elastic stress-strain relations due to the presence of linear strain variation along the shell thickness. The curved, high-order element together with an implicit procedure to solve nonlinear equations guarantees precision in calculations. The momentum conserving, the locking free behavior, and the frame invariance of the adopted mapping are numerically confirmed by examples.

This paper investigates the input-to-state stable in the mean (ISSiM) property of the switched stochastic nonlinear (SSN) systems with an improved average dwell time (ADT) method in two cases: (i) all of the constituent subsystems are ISSiM and (ii) parts of the constituent subsystems are ISSiM. First, an improved ADT method for stability of SSN systems is introduced. Then, based on that not only a new ISSiM result for SSN systems whose subsystems are ISSiM is presented, but also a new ISSiM result for such systems in which parts of subsystems are ISSiM is established. In comparison with the existing ones, the main results obtained in this paper have some advantages. Finally, an illustrative example with numerical simulation is verified the correctness and validity of the proposed results.

Although polynomial NARX models have been intensively used in nonlinear system identification, few papers discussed how to relate the inner nonlinearities to specific types of clusters and regressors. The objective of this paper is to discuss this relationship for a class of systems that contain even or odd nonlinearities. This class covers block-structured models (Hammerstein, Wiener, and others) and systems with dynamic nonlinearities. To achieve the paper’s aim, a deep frequency-domain analysis is performed. For each type of nonlinearity, all the NARX clusters are investigated and the results show that each regressor type provides specific nonlinear contribution. The investigation is based on an output power spectra analysis when a specific multisinusoidal excitation is applied. According to the spectral contributions in some of the frequency lines, the nonlinearity classification is possible. By applying the same procedure to the clusters, one interprets how these clusters can (or not) contribute to explain the system nonlinearity. The paper findings have two major impacts: (i) one gains deep knowledge on how the nonlinearities are coded by the clusters, and (ii) this information can be used, for instance, to aid a structure selection procedure (ERR, term clustering, etc.) during the discarding of the clusters which are not able to explain the system nonlinear behavior. Some practical and experimental aspects are discussed, while numerical examples are presented to show the validity of the theoretical analysis.

This paper is concerned with the problem of delay-dependent robust stability analysis for a class of uncertain neutral type Lur’e systems with mixed time-varying delays. The system has not only time-varying uncertainties and sector-bounded nonlinearity, but also discrete and distributed delays, which has never been discussed in the previous literature. Firstly, by employing one effective mathematical technique, some less conservative delay-dependent stability results are established without employing the bounding technique and the mode transformation approach. Secondly, by constructing an appropriate new type of Lyapunov-Krasovskii functional with triple terms, improved delay-dependent stability criteria in terms of linear matrix inequalities (LMIs) derived in this paper are much brief and valid. Furthermore, both nonlinearities located in finite sector and infinite one have been also fully taken into account. Finally, three numerical examples are presented to illustrate lesser conservatism and the advantage of the proposed main results.

This paper outlines a methodology to study the stability of Takagi-Sugeno's (TS) fuzzy models. The stability analysis of the TS model is performed using a quadratic Liapunov candidate function. This paper proposes a relaxation of Tanaka's stability condition: unlike related works, the equations to be solved are not Liapunov equations for each rule matrix, but a convex combination of them. The coefficients of this sums depend on the membership functions. This method is applied to the design of continuous controllers for the TS model. Three different control structures are investigated, among which the Parallel Distributed Compensation (PDC). An application to the inverted pendulum is proposed here.

This paper considers the characterization and computation of invariant sets for discrete-time, time-invariant, linear systems with disturbance inputs whose values are confined to a specified compact set but are otherwise unknown. The emphasis is on determining maximal disturbance-invariant sets X that belong to a specified subset Γ of the state space. Such d-invariant sets have important applications in control problems where there are pointwise-in-time state constraints of the form χ ( t ) ∈ Γ . One purpose of the paper is to unite and extend in a rigorous way disparate results from the prior literature. In addition there are entirely new results. Specific contributions include: exploitation of the Pontryagin set difference to clarify conceptual matters and simplify mathematical developments, special properties of maximal invariant sets and conditions for their finite determination, algorithms for generating concrete representations of maximal invariant sets, practical computational questions, extension of the main results to general Lyapunov stable systems, applications of the computational techniques to the bounding of state and output response. Results on Lyapunov stable systems are applied to the implementation of a logic-based, nonlinear multimode regulator. For plants with disturbance inputs and state-control constraints it enlarges the constraint-admissible domain of attraction. Numerical examples illustrate the various theoretical and computational results.

The paper proposes a procedure for design of PI controllers for hydraulic systems with long transmission lines which are described by models of high order. Design is based on the combination of the IE criterion and engineering specifications (settling time and relative stability) as well as on the application ofD-decomposition. In comparison with some known results, the method is of graphical character, and it is very simple (solving nonlinear algebraic equations is eliminated). The paper presents the algorithm of software procedure for design of the controller. The method is compared with other methods at the level of simulation, and its superiority is shown. By applying the Nyquist criterion, it is shown that the method possesses robustness in relation to non modelled dynamics.

Continuous-time recurrent neural networks (RNNs) play an important part in practical applications. Recently, due to the ability of assuring the convergence of the equilibriums on the boundary line between stable and unstable, the study on the critical dynamics behaviors of RNNs has drawn especial attentions. In this paper, a new asymptotical stable theorem and two corollaries are presented for the unified RNNs, that is, the UPPAM RNNs. The analysis results given in this paper are under the generallyP-critical conditions, which improve substantially upon the existing relevant critical convergence and stability results, and most important, the compulsory requirement of diagonally nonlinear activation mapping in most recent researches is removed. As a result, the theory in this paper can be applied more generally.

This paper is concerned with an integral terminal sliding mode tracking control for a class of uncertain nonaffine nonlinear systems. Firstly, the nonaffine nonlinear systems is approximated to facilitate the desired control design via a novel dynamic modeling technique. Next, for the unmeasured disturbance of nonlinear systems, integral terminal sliding mode disturbance observer is presented. The developed disturbance observer can guarantee the disturbance approximation error to converge to zero in the finite time. Subsequently, based on approximated nonlinear model and the designed disturbance observer, the integral terminal sliding mode tracking control is presented for nonaffine nonlinear systems with uncertainty. Different from traditional terminal sliding-mode control, this paper accomplishes finite convergence time for nonaffine nonlinear systems and avoids the singular problem in the controller design. Furthermore, the control system is forced to start on the terminal sliding hyperplane, so that the reaching time of the sliding modes is eliminated. Finally, two numerical simulation results are given to illustrate the effectiveness of the proposed method.

In this paper we discuss some problems arising in mathematical modeling of artificial hearts. The hydrodynamics of blood flow in an artificial heart chamber is governed by the Navier-Stokes equation, coupled with an equation of hyperbolic type subject to moving boundary conditions. The flow is induced by the motion of a diaphragm (membrane) inside the heart chamber attached to a part of the boundary and driven by a compressor (pusher plate). On one side of the diaphragm is the blood and on the other side is the compressor fluid. For a complete mathematical model it is necessary to write the equation of motion of the diaphragm and all the dynamic couplings that exist between its position, velocity and the blood flow in the heart chamber. This gives rise to a system of coupled nonlinear partial differential equations; the Navier-Stokes equation being of parabolic type and the equation for the membrane being of hyperbolic type. The system is completed by introducing all the necessary static and dynamic boundary conditions. The ultimate objective is to control the flow pattern so as to minimize hemolysis (damage to red blood cells) by optimal choice of geometry, and by optimal control of the membrane for a given geometry. The other clinical problems, such as compatibility of the material used in the construction of the heart chamber, and the membrane, are not considered in this paper. Also the dynamics of the valve is not considered here, though it is also an important element in the overall design of an artificial heart. We hope to model the valve dynamics in later paper.

This paper investigates the problem ofpth moment exponential stability for a class of stochastic neural networks with time-varying delays and distributed delays under nonlinear impulsive perturbations. By means of Lyapunov functionals, stochastic analysis and differential inequality technique, criteria onpth moment exponential stability of this model are derived. The results of this paper are completely new and complement and improve some of the previously known results (Stamova and Ilarionov (2010), Zhang et al. (2005), Li (2010), Ahmed and Stamova (2008), Huang et al. (2008), Huang et al. (2008), and Stamova (2009)). An example is employed to illustrate our feasible results.

In this paper, we propose a stochastic programming model, which considers a ratio of two nonlinear functions and probabilistic constraints. In the former, only expected model has been proposed without caring variability in the model. On the other hand, in the variance model, the variability played a vital role without concerning its counterpart, namely, the expected model. Further, the expected model optimizes the ratio of two linear cost functions where as variance model optimize the ratio of two non-linear functions, that is, the stochastic nature in the denominator and numerator and considering expectation and variability as well leads to a non-linear fractional program. In this paper, a transportation model with stochastic fractional programming (SFP) problem approach is proposed, which strikes the balance between previous models available in the literature.

The flight dynamic equations in mathematics for aircraft response to the adverse weathers, such as wind shear, atmospheric turbulence, and in-flight icing, are nonlinear and unsteady. To effectively analyze the performance degradation and variations in stability of commercial aircraft that encountered these weather hazards, the nonlinear and dynamic (i.e., time dependent) aerodynamic models based on flight data would be needed. In the present paper, a numerical modeling method based on a fuzzy-logic algorithm will be presented to estimate the aerodynamic models for a twin-jet transport by using the flight data from the flight data recorder (FDR). The aerodynamic models having the capability to generate continuous stability derivatives, especially for sensitivity study of unknown factors in adverse weather conditions, will be demonstrated in this paper.

The paper deals with dynamic problems of discrete-continuous systems with local nonlinearities, the analysis of which is reduced to solving nonlinear differential equations with a retarded argument. This concerns the discrete-continuous systems subject to torsional, longitudinal, or shear deformations, where the equations of motion for elastic elements are classical wave equations. It is assumed that the characteristics of local nonlinearities are of a soft-type and in the paper they are described by four nonlinear functions. After a short general description of the approach used, the detailed considerations and numerical results are presented for a multimass discrete-continuous system with a local nonlinearity having the characteristics of a soft-type subject to shear deformations.

In this paper, some fixed-point theorems are established for strongly subadditive maps on CΩ,ϒ (where CΩ,ϒ denotes the space of ϒ-valued continuous functions on a compact Hausdorff space Ω and ϒ is a unital Banach algebra). Finally, the result is applied to prove the existence and uniqueness of a solution for a system of nonlinear integrodifferential equations.

The critical speed and hunting frequency are two basic research objects of vehicle system dynamics and have a significant influence on the dynamic performance. A lateral dynamic model with 17 degrees of freedom was established in this study to investigate the critical speed and hunting frequency of a high-speed railway vehicle. The nonlinearities of wheel/rail contact geometry, creep forces, and yaw damper were all considered. A heuristic nonlinear creep model was employed to estimate the contact force between the wheel and the rail. The Maxwell model, which covers the influence of the stiffness characteristic, is used to simulate the yaw damper. To reflect the blow-off of the yaw damper, the damping coefficient is described by stages. Based on the mathematical model, the combined effects of vehicle parameters on the critical speed in the straight line and hunting frequency of the wheelset were investigated innovatively. The novel phenomenon that the hunting frequency exhibits a sudden increase from a smaller value to a larger value when the blow-off of the yaw damper occurs was discovered during the calculations. The extents to which various parameters affect the critical speed and hunting frequency are clear on the basis of the numerical results. Moreover, all of the parameter values were divided into three sections to determine the sensitive range for the critical speed and hunting frequency. The results show that the first section of values plays the decisive role on both the critical speed and the hunting frequency for all parameters analyzed. The investigation in this paper enriches the study of hunting stability and gives some ideas to probably solve the abnormal vibrations during the actual operation.

There are many accidents of slope failure due to rainfall at home and abroad, which have caused heavy casualties and property losses. Stability analysis and evaluation of slope have become a research hotspot. Aiming at the slope stability under different rainfall, this paper takes Yuebao Open-pit Mine slope as an example, has constructed a dynamic variable weight (VW) model of influencing factors on slope stability, and has analyzed the dynamic change and correlation of the slope indexes weights under different monthly maximum rainfall. On this basis, the dynamic evaluation model of slope stability has been established based on uncertainty measurement (UM), and the risk importance (RI) q which is proposed has quantitatively evaluated the risk degree of slope. The results show that under different monthly maximum rainfall the weight of each index is no longer a fixed value but a nonlinear and dynamic change law, and there is a strong correlation among the monthly maximum rainfall, internal friction angle, and cohesion. In addition, the q increases gradually with the increase of the monthly maximum rainfall, and the stability evaluation results are highly consistent with the HP1 slope, which have verified the reliability of the dynamic evaluation model. So, it can provide technical support for the safety production and management of open-pit slope and can also provide reference for related research.

Dynamic relaxation (DR) is a widely used numerical method to determine the static equilibrium of a dynamic system. However, it is difficult to apply conventional DR methods to nonlinear models because they require estimation of a stiffness matrix of the model. To resolve the forementioned problem, a new dynamic relaxation method using continuous kinetic damping (CKDR) was proposed in previous research. The CKDR method does not require any model parameters including the stiffness matrix, and it possesses absolute stability and a second-order convergence rate. However, the convergence rate is proportional to square of the step size, and this may result in a low convergence rate if the selected step size is excessively small. This problem leads to difficulties in the practical use of CKDR. Thus, an adaptive step-size method is proposed in this paper to control the convergence rate of CKDR. The proposed method estimates natural frequency of the model and determines adaptive step size. Static equilibrium simulations were performed for three different models to verify the method. The results revealed that the computational cost of CKDR with a variable step size was very efficient when compared to fixed step sizes and that the convergence rate was also controlled as intended. In addition, the lowest natural frequencies of models in static equilibrium were accurately estimated.

This paper will study the high accuracy numerical solutions for elastic equations with nonlinear boundary value conditions. The equations will be converted into nonlinear boundary integral equations by the potential theory, in which logarithmic singularity and Cauchy singularity are calculated simultaneously. Mechanical quadrature methods (MQMs) are presented to solve the nonlinear equations where the accuracy of the solutions is of three orders. According to the asymptotical compact convergence theory, the errors with odd powers asymptotic expansion are obtained. Following the asymptotic expansion, the accuracy of the solutions can be improved to five orders with the Richardson extrapolation. Some results are shown regarding these approximations for problems by the numerical example.

The current paper shows the application of the boundary element method for the analysis of plates under shear stress causing plasticity. In this case, the shear deformation of a plate is considered by means of Reissner’s theory. The probability of failure of a Reissner’s plate due to a proposed index plastic behaviorIPBis calculated taking into account the uncertainty in mechanical and geometrical properties. The problem is developed in three dimensions. The classic plasticity’s theory is applied and a formulation for initial stresses that lead to the boundary integral equations due to plasticity is also used. For the plasticity calculation, the von Misses criterion is used. To solve the nonlinear equations, an incremental method is employed. The results show a relatively small failure probability (PF) for the ranges of loads between0.6

In this paper, we study the dynamics of an abstract evolution equation with fading memory with a critical growing nonlinearity. By use of some new methods and asymptotic estimate techniques, we first verify the asymptotic compact of solution semigroup and then prove the existence of global attractors in weak topological space and strong topological space, while the forcing term only belongs to H-1(Ω) or L2(Ω), respectively. The results are new and appear to be optimal.

The temperature distribution in real-world industrial environments is often in a three-dimensional space, and developing a reliable method to predict such volumetric information is beneficial for the combustion diagnosis, the understandings of the complicated physical and chemical mechanisms behind the combustion process, the increase of the system efficiency, and the reduction of the pollutant emission. In accordance with the machine learning theory, in this paper, a new methodology is proposed to predict three-dimensional temperature distribution from the limited number of the scattered measurement data. The proposed prediction method includes two key phases. In the first phase, traditional technologies are employed to measure the scattered temperature data in a large-scale three-dimensional area. In the second phase, the Gaussian process regression method, with obvious superiorities, including satisfactory generalization ability, high robustness, and low computational complexity, is developed to predict three-dimensional temperature distributions. Numerical simulations and experimental results from a real-world three-dimensional combustion process indicate that the proposed prediction method is effective and robust, holds a good adaptability to cope with complicated, nonlinear, and high-dimensional problems, and can accurately predict three-dimensional temperature distributions under a relatively low sampling ratio. As a result, a practicable and effective method is introduced for three-dimensional temperature distribution.

This paper addresses the problem of finite-time tracking control for multiple-input and multiple-output (MIMO) nonlinear systems with asymmetric saturations. A systematic approach is proposed to eliminate the effects of unmeasured external disturbances and unknown asymmetric saturations. In the proposed control strategy, a terminal sliding mode disturbance observer is provided to estimate the augmented disturbance (which contains the unknown asymmetric input saturation and external disturbance). The approximation error of the augmented disturbance can converge to zero in a fixed finite-time interval. Furthermore, a novel finite-time tracking control algorithm is developed to guarantee fast convergence of the tracking error. Compared with the existing results on finite-time tracking control, the chattering problem and the input saturation problem can be solved in a unified framework. Several simulations are given to demonstrate the effectiveness of the proposed approach.

The problem of minimum time-jerk trajectory planning for a robot is discussed in this paper. The optimal objective function is composed of two segments along the trajectory, which are the proportional to the total execution time and the proportional to the integral of the squared jerk (which denotes the derivative of the acceleration). The augmented Lagrange constrained particle swarm optimization (ALCPSO) algorithm, which combines the constrained particle swarm optimization (CPSO) with the augmented Lagrange multiplier (ALM) method, is proposed to optimize the objective function. In this algorithm, falling into a local best value can be avoided because a new particle swarm is generated per initial procedure, and the best value gained from the former generation is saved and delivered to the next generation during the iterative search procedure to enable the best value to be found more easily and more quickly. Finally, the proposed algorithm is tested on a planar 3-degree-of-freedom (DOF) robot; the simulation results show that the algorithm is effective, offering a solution to the time-jerk optimal trajectory planning problem of a robot under nonlinear constraints.

Convection-dominated diffusion problems usually develop multiscaled solutions and adaptive mesh is popular to approach high resolution numerical solutions. Most adaptive mesh methods involve complex adaptive operations that not only increase algorithmic complexity but also may introduce numerical dissipation. Hence, it is motivated in this paper to develop an adaptive mesh method which is free from complex adaptive operations. The method is developed based on a range-discrete mesh, which is uniformly distributed in the value domain and has a desirable property of self-adaptivity in the spatial domain. To solve the time-dependent problem, movement of mesh points is tracked according to the governing equation, while their values are fixed. Adaptivity of the mesh points is automatically achieved during the course of solving the discretized equation. Moreover, a singular point resulting from a nonlinear diffusive term can be maintained by treating it as a special boundary condition. Serval numerical tests are performed. Residual errors are found to be independent of the magnitude of diffusive term. The proposed method can serve as a fast and accuracy tool for assessment of propagation of steep fronts in various flow problems.

In this paper, we study the existence of a global attractor for a class ofn-dimension thermoelastic coupled beam equations with structural dampingutt+Δ2u+Δ2ut-[σ(∫Ω‍(∇u)2dx)+ϕ(∫Ω‍∇u∇utdx)]Δu+f1(u)+g(ut)+νΔθ=q(x), in Ω×R+, andθt-Δθ+f2(θ)-νΔut=0. HereΩis a bounded domain ofRN, andσ(·)andϕ(·)are both continuous nonnegative nonlinear real functions andqis a static load. The source termsf1(u)andf2(θ)and nonlinear external dampingg(ut)are essentially|u|ρu,|θ|ϱθ, and|ut|rutrespectively.

This paper introduces a new four-dimensional hyperchaotic financial system on the basis of an established three-dimensional nonlinear financial system and a dynamic model by adding a controller term to consider the effect of control on the system. In terms of the proposed financial system, the sufficient conditions for nonexistence of chaotic and hyperchaotic behaviors are derived theoretically. Then, the solutions of equilibria are obtained. For each equilibrium, its stability and existence of Hopf bifurcation are validated. Based on corresponding first Lyapunov coefficient of each equilibrium, the analytical proof of the existence of periodic solutions is given. The ultimate bound and positively invariant set for the financial system are obtained and estimated. There exists a stable periodic solution obtained near the unstable equilibrium point. Finally, the dynamic behaviors of the new system are explored from theoretical analysis by using the bifurcation diagrams and phase portraits. Moreover, the hyperchaotic financial system has been simulated using a specially designed electronic circuit and viewed on an oscilloscope, thereby confirming the results of the numerical integrations and its real contribution to engineering.

The uncertain nonlinear systems can be modeled with fuzzy equations by incorporating the fuzzy set theory. In this paper, the fuzzy equations are applied as the models for the uncertain nonlinear systems. The nonlinear modeling process is to find the coefficients of the fuzzy equations. We use the neural networks to approximate the coefficients of the fuzzy equations. The approximation theory for crisp models is extended into the fuzzy equation model. The upper bounds of the modeling errors are estimated. Numerical experiments along with comparisons demonstrate the excellent behavior of the proposed method.

Conditional nonlinear optimal perturbation (CNOP) has been widely applied to study the predictability of weather and climate. The classical method of solving CNOP is adjoint method, in which the gradient is obtained using the adjoint model. But some numerical models have no adjoint models implemented, and it is not realistic to develop from scratch because of the huge amount of work. The gradient can be obtained by the definition in mathematics; however, with the sharp growth of dimensions, its calculation efficiency will decrease dramatically. Therefore, the gradient is rarely obtained by the definition when solving CNOP. In this paper, an efficient approach based on the gradient definition is proposed to solve CNOP around the whole solution space and parallelized. Our approach is applied to solve CNOP in Zebiak-Cane (ZC) model, and, compared with adjoint method, which is the benchmark, our approach can obtain similar results in CNOP value and pattern aspects and higher efficiency in time consumption aspect, only 12.83 s, while adjoint method spends 15.04 s and consumes less time if more CPU cores are provided. All the experimental results show that it is feasible to solve CNOP with our approach based on the gradient definition around the whole solution space.

Coriolis dynamic vibration absorber is a device working in nonlinear zone. In stochastic design of this device, the Monte Carlo simulation requires large computation time. A simplified model of the system is built to retain the most important nonlinear term, the Coriolis damping of the dynamic vibration absorber. Applying the full equivalent linearization technique to the simplified model is inaccurate to describe the nonlinear behavior. This paper proposes a combination of partial stochastic linearization and Karhunen-Loeve expansion to solve the problem. The numerical demonstration of a ropeway gondola induced by wind load is presented. A design example based on the partial linearization supports the advantage of the proposed approach.

In this paper, a class of nonlinear algebraic differential equations (NADEs) is studied. The Painlevé analysis of the NADEs is considered. Abundant meromorphic solutions of the NADEs are obtained by means of the complex method. Then, meromorphic exact solutions of the Schamel-Korteweg-de Vries (S-KdV) equation and (2+1)-dimensional sine-Gordon equation are derived via the applications of the NADEs.

[EN] The main contribution of this study is to present a new optimal eighth-order scheme for locating zeros with multiplicity m > 1. An extensive convergence analysis is presented with the main theorem in order to demonstrate the optimal eighth-order convergence of the proposed scheme. Moreover, a local convergence study for the optimal fourth-order method defined by the first two steps of the new method is presented, allowing us to obtain the radius of the local convergence ball. Finally, numerical tests on some real-life problems, such as a Van der Waals equation of state, a conversion Chemical engineering problem and two standard academic test problems are presented, which confirm the theoretical results established in this paper and the efficiency of this proposed iterative method. We observed from the numerical experiments that our proposed iterative methods have good values for convergence radii. Further, they have not only faster convergence towards the desired zero of the involved function but they also have both smaller residual error and a smaller difference between two consecutive iterations than current existing techniques., This research was partially supported by Ministerio de Economia y Competitividad under grant MTM2014-52016-C2-2-P and by the project of Generalitat Valenciana Prometeo/2016/089.

In dynamic systems, some nonlinearities generate special connection problems of non-Z2symmetric homoclinic and heteroclinic orbits. Such orbits are important for analyzing problems of global bifurcation and chaos. In this paper, a general analytical method, based on the undetermined Padé approximation method, is proposed to construct non-Z2symmetric homoclinic and heteroclinic orbits which are affected by nonlinearity factors. Geometric and symmetrical characteristics of non-Z2heteroclinic orbits are analyzed in detail. An undetermined frequency coefficient and a corresponding new analytic expression are introduced to improve the accuracy of the orbit trajectory. The proposed method shows high precision results for the Nagumo system (one single orbit); general types of non-Z2symmetric nonlinear quintic systems (orbit with one cusp); and Z2symmetric system with high-order nonlinear terms (orbit with two cusps). Finally, numerical simulations are used to verify the techniques and demonstrate the enhanced efficiency and precision of the proposed method.

This paper focuses on the semiglobal stabilization for a class of nonlinear systems with nonstrict feedback form. Based on a generalized scaling technique, an adaptive control algorithm with dynamic high gain is developed for a class of nonstrict feedback nonlinear systems. It can be proved that, under some appropriate design parameters, all signals of the resulting closed-loop system are bounded semiglobally, and the system state will be convergent to origin exponentially. Finally, a numerical simulation is provided to confirm the effectiveness of the proposed method.

Oxygen diffusion into the cells with simultaneous absorption is an important problem and it is of great importance in medical applications. The problem is mathematically formulated in two different stages. At the first stage, the stable case having no oxygen transition in the isolated cell is investigated, whereas at the second stage the moving boundary problem of oxygen absorbed by the tissues in the cell is investigated. In oxygen diffusion problem, a moving boundary is essential feature of the problem. This paper extends a homotopy perturbation method with time-fractional derivatives to obtain solution for oxygen diffusion problem. The method used in dealing with the solution is considered as a power series expansion that rapidly converges to the nonlinear problem. The new approximate analytical process is based on two-iterative levels. The modified method allows approximate solutions in the form of convergent series with simply computable components.

The projective reconstruction of 3D structures from 2D images is a central problem in computer vision. Existing methods for this problem are usually nonlinear or indirect. In the previous direct methods, we usually have to solve a system of nonlinear equations. They are very complicated and hard to implement. The previous linear indirect methods are usually imprecise. This paper presents a linear and direct method to derive projective structures of 3D points from their 2D images. Algorithms to compute projective invariants from two images, three images, and four images are given. The method is clear, simple, and easy to implement. For the first time in the literature, we present explicit linear formulas to solve this problem.Mathematicacodes are provided to demonstrate the correctness of the formulas.