Search

Food adulteration presents a significant challenge due to the evasion of legal oversight and the difficulty of identification. Addressing this issue, there is an urgent need for on-site, rapid, visually based small-scale equipment, along with large-scale screening technology, to enable prompt results without providing opportunities for dishonest traders to react. Colorimetric reactions offer advantages in terms of speed, visualization, and miniaturization. However, there is a scarcity of suitable colorimetric reactions for food adulteration detection, and interference from colored food impurities and easily comparable color results affects accuracy. To overcome limitations, this study introduces a novel approach utilizing polydopamine magnetic nanoparticles to enrich DNA in food samples, effectively eliminating interfering components. By employing gold nanoparticles to generate magnetic-gold nanoparticles, a single magnetic bead achieves simultaneous enrichment, impurity removal, and detection. The use of paper-based biosensors and visualization equipment allows for the visualization and digital analysis of results, achieving a low detection limit of 4.59 nmol mL -1 . The method also exhibits high accuracy and repeatability, with a RSD ranging from 1.6 % to 4.0 %. This innovative colorimetric method addresses the need for rapid, miniaturized, and large-scale detection, thus providing a solution for food adulteration challenges., Competing Interests: Declaration of Competing Interest The author declare that there are no conflicts of interest associated with this manuscript. This research was conducted with utmost integrity and impartiality, adhering to the highest ethical standards. We have no financial or personal relationships that could inappropriately influence the content or interpretation of this work., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this work, a sustainable 3D carbon aerogel (AO-WPC) is prepared from waste paper (WP), and used for efficient antibiotics removal from water. The AO-WPC aerogel shows good mechanical property and can recover after 100th of 30 % compression strain. The specific surface area of AO-WPC aerogel is up to 654.58 m 2 /g. More importantly, this aerogel reveals proper pore size distribution, including micro sized macropores between carbon fibers and intrinsic nano scale mesopores (11.86 nm), which is conducive to remove antibiotics from water. Taking tetracycline (Tc) as an example, the maximum adsorption capacity and adsorption rate of AO-WPC for Tc are as high as 384.6 mg/g and 0.510 g/(mg‧min), respectively, which exhibits significant advantages over most of the recent absorbents, and the adsorption toward Tc reveals good resistance to various environmental factors, including pH, various ions, and dissolved organic matter (DOM). Moreover, good thermal stability enables the AO-WPC aerogel to be regenerated through simple burning, and the adsorption capacity of Tc only decreases by 10.4 % after 10 cycles. Mechanism research shows that hydrogen bonding and π-π electron-donor-acceptor (EDA) interaction play the important role in the adsorption. The excellent mechanical property and adsorption performance imply good practical prospect of the AO-WPC aerogel., Competing Interests: Declaration of Competing Interest We declare no conflict of interest. This manuscript has not been published or presented elsewhere in part or in entirety, and is not under consideration by another journal. There are no conflicts of interest to declare. All authors have contributed to, read, and approved this submitted manuscript in its current form., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The contamination of paper products by various chemicals has been reported on a global level, but to date, no published research has investigated pharmaceutical contamination of paper-based products. In this study, pharmaceutical analysis was conducted on 42 samples collected from various points of the recycled paper value chain in Cape Town, South Africa, which included the various grades that may be included in the manufacturing of recycled paperboard. The analysis was achieved by ultrasonic-assisted extraction of paper samples before detection by UHPLC-Q Orbitrap. Quantification limits ranged from 1.15 pg/g for ketoprofen to 46.07 pg/g for methocarbamol. Pharmaceuticals identified in newspaper samples were dexamethasone, ketoprofen, and 17β-estradiol. The latter was also detected in paper shopping bags (up to 697.49 ng/g), infant bathtub packaging (280.62 ng/g), battery packaging (137.43 ng/g), and an egg carton (170.47 ng/g). Carbamazepine was also prominent with its concentration reaching 13.02 ng/g in a vegetable box. Suspect screening tentatively identified 14 additional pharmaceuticals in paper samples, with minocycline, prazepam, and anabolic steroids appearing more prominently. This pioneering study indicated that unintentional pharmaceutical exposure had expanded beyond environmental media to consumer products., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Nondumiso Mofokeng reports funding was provided by Mpact Operations Pty (Ltd). All other authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Cu2+ contamination and food spoilage raise food and drinking water safety issues, posing a serious threat to human health. Besides, Cu2+ and H 2 S levels indicate excess Cu2+-caused diseases and protein-containing food spoilage. Herein, a coumarin-containing bifunctional paper-based fluorescent platform integrated with a straightforward smartphone color recognition app is developed by an all-in-one strategy. The proposed fluorescent materials can simultaneously detect Cu2+ and H 2 S for on-demand food and drinking water safety monitoring at home. Specifically, a coumarin-derived fluorescence sensor (referred to as CMIA) with a low detection limit (0.430 μM) and high-selectivity/-sensitivity for Cu2+ is synthesized through a simple one-step route and then loaded onto commercially used cellulose fiber filter paper to engineer a biomass-based fluorescent material (CMIA-FP). The CMIA-FP offers user-friendly, high-precision, fast-responsive, and real-time visual monitoring of Cu2+. Moreover, CMIA forms a chemically stable complex with Cu2+, loaded onto filter paper to prepare another biomass-based fluorescent platform (CMIA-CU-FP) for visual real-time monitoring of H 2 S. Based on the exquisite composition design, the proposed dual-function paper-based fluorescent materials equipped with a smartphone color recognition program concurrently realize fast, accurate, and easy real-time monitoring of Cu2+ in drinking water and H 2 S in chicken breast-/shrimp-spoilage, demonstrating an effective detection strategy for the Cu2+ and H 2 S monitoring and presenting the new type of biomass-based platforms for concentrated reflection of drinking water and food safety. [Display omitted] • On-demand platform enabling simultaneously home-detecting Cu2+/H 2 S was proposed. • The platform realizes user-friendly, low-cost, fast-response detecting of Cu2+/H 2 S. • The platform achieves real-time monitoring of drinking-water and meat-storage safety. • The study provides effective tactics for the integrated Cu2+ and H 2 S home-detecting. [ABSTRACT FROM AUTHOR]

Dissolved sulfide tends to species transformation and loss upon leaving the matrix, thus the development of a practical on-site determination of sulfide is crucial for environmental monitoring and human health. In this work, a novel paper-based ratiometric fluorescence sensor was developed for the field analysis of sulfide, which system was constructed by the inner filter effect (IFE) of CdS quantum dots (QDs) toward carbon dots (C-dots). Instead of an aqueous phase system, the conversion of sulfide to its hydride would induce the in-situ formation of CdS QDs on the paper, which acted as an energy acceptor to quench the emission of C-dots, leading to a variation of ratiometric fluorescence from blue to yellow with the increasing concentration of sulfide. Moreover, we proposed a smartphone-based fluorescence capture device integrated with a programmed Python program, accomplishing both color recognition and accurate detection of sulfide. Under the optimal condition, this ratiometric fluorescence sensor allowed for the on-site analysis of sulfide with a limit of detection of 0.05 μM. The accuracy of the sensor was validated via the successful field analysis of environmental water samples with satisfactory recoveries. Compared to other fluorescence methods used for sulfide analysis, this developed system retains the advantages of label-free, low-cost, ease of operation, and miniaturization, showing great potential for the measurement of sulfide on-site, as well as environmental monitoring. [Display omitted] • A paper-based fluorescence sensor was developed for the field analysis of sulfide. • Sulfide induced the IFE between C-dots and CdS QDs and caused fluorescence change. • The portable device for sulfide analysis is low-cost and easy to operate. • The developed system shows great potential for the measurement of sulfide on-site. [ABSTRACT FROM AUTHOR]

The simultaneous bioremediation and bioconversion of papermaking wastewater by psychrotrophic microorganisms holds great promise for developing sustainable environments and economies in cold regions. Here, the psychrotrophic bacterium Raoultella terrigena HC6 presented high endoglucanase (26.3 U/mL), xylosidase (732 U/mL), and laccase (8.07 U/mL) activities for lignocellulose deconstruction at 15 °C. mRNA monitoring and phenotypic variation analyses confirmed that cold-inducible cold shock protein A (CspA) facilitated the expression of the cel208, xynB68, and lac432 genes to increase the enzyme activities in strain HC6. Furthermore, the cspA gene-overexpressing mutant (strain HC6-cspA) was deployed in actual papermaking wastewater and achieved 44.3%, 34.1%, 18.4%, 80.2% and 100% removal rates for cellulose, hemicellulose, lignin, COD, and NO 3 - -N at 15 °C. Simultaneously, 2,3-butanediol (2,3-BD) was produced from the effluent with a titer of 2.98 g/L and productivity of 0.154 g/L/h. This study reveals an association between the cold regulon and lignocellulolytic enzymes and provides a promising candidate for simultaneous papermaking wastewater treatment and 2,3-BD production., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Paper, a readily available renewable resource, comprises of interwoven cellulosic fibers, which can be functionalized to develop interesting low-cost adsorbent material for water purification. In this study, polyethyleneimine (PEI)-functionalized paper was used for the removal of hazardous pollutants such as Au and Ag nanoparticles, Cr(VI) anions, Ni 2+ , Cd 2+ , and Cu 2+ cations from spiked water samples. Compared to untreated paper, the PEI-coated paper showed significant improvement in adsorption capacities toward the pollutants investigated in this study. Kinetics, isotherm models, pH, and desorption studies were carried out to study the adsorption mechanism of pollutants on the adsorbent surface. Adsorption of pollutants was better described by pseudo-second order kinetics and Langmuir isotherm model. Maximum adsorption of anionic pollutants was achieved at pH 5 while that of cations was at pH > 6. Overall, the PEI-functionalized paper showed interesting Langmuir adsorption capacities for heavy metal ions such as Cr(VI) (68 mg/g), Ni 2+ (208 mg/g), Cd 2+ (370 mg/g), and Cu 2+ (435 mg/g) ions at neutral pH. In addition, the modified paper was also used to remove Ag-citrate (79 mg/g), Ag-PVP (46 mg/g), Au-citrate (30 mg/g), Au-PVP (17 mg/g) nanoparticles from water. Desorption of NPs from the adsorbent was done by washing with 2 M HCl or thiourea solution, while heavy metal ions were desorbed using 1 M NaOH or HNO 3 solution. The modified paper retained its extraction efficiencies upon desorption of pollutants. [ABSTRACT FROM AUTHOR]

As human beings have been consistently exposed to bisphenol A (BPA) and bisphenol S (BPS) derived from various products, the intake of BPS/BPA to humans has been extensively studied. However, using conventional biological matrices such as urine, blood, or dissected skin to detect BPS/BPA in the human body system requires longer exposure time to them, hardly defines the pollutant source of the accumulated BPS/BPA, and is often invasive. Herein, our new approach i.e. fingerprint analysis quantitatively confirms the transfer of BPS/BPA from receipts (specific pollution source) to human skin only within receipt-handling of "20 s". When receipts (fingertip region size; ~1 cm 2 ) containing 100-300 μg of BPS or BPA are handled, 20-40 μg fingerprint -1 of BPS or BPA is transferred to human skin (fingertip). This transferred amount of BPS/BPA can still be toxic according to the toxicity test using water fleas. As a visual evidence, a fingerprint map that matches the distribution of the absorbed BPS/BPA is developed using a mass spectrometry imaging tool. This is the first study to analyze fingerprints to determine the incorporation mechanism of emerging pollutants. This study provides an efficient and non-invasive environmental forensic tool to analyze amounts and sources of hazardous substances., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

Due to the high demand of paper and related items, pulp and paper industry is flourishing day by day. With increased production, come the hazards associated with the toxic elements present in the effluents. Various microorganisms are currently employed in the remediation of these toxic effluents. In addition, various techniques like ozonation, electrocoagulation, UV treatment, Fenton's reagent, and photo-Fenton based techniques are used in advanced oxidation processes to reduce these toxins from effluents. This review highlights various above mentioned advanced techniques and innovative processes along with the biological remediation of these toxic effluents with the help of some potential microbial consortia or their combinatory effects. Moreover, the present review will also disclose the ideas on utilizing the tools of metabolic engineering, systems biology, and artificial intelligence towards microbial engineering for relatively better bioremediation processes. In the future, these techniques might be helpful in increasing the capability of microbial consortia towards detoxification of effluents to make them environmentally safe. Finally, this review gives well-synchronized approaches to get more insights into these innovative methodologies and techniques and their use for various industrial applications., Competing Interests: Declaration of Competing Interest Not applicable., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Instrument-free, portable and direct read-out mini-devices have wider application prospects in various fields, especially for real-time/on-site detection in environmental science. Herein, a colorimetric fluorescent sensor for detecting cadmium ions (Cd 2+ ) based on aggregation-induced emission (AIE) was established, fluorescent paper strips integrated with smartphone platform was further designed for the visualization, on-site and quantitative detection of Cd 2+ . The colorimetric fluorescent sensor was prepared by mixing orange emission glutathione-stabilized gold nanoclusters (AuNCs) with blue emission ethylenediamine functionalized graphene oxide (EDA-GO), and introducing copper ions (Cu 2+ ) to quench the orange emission of AuNCs while the blue emission served as a background reference without color change. The Cd 2+ can induce Cu 2+ -GSH-AuNCs to aggregation and emit orange fluorescence, causing the fluorescent color of the sensor changed from blue to red with the limit of detection (LOD) as low as 33.3 nM in solution. Moreover, fluorescent paper strips integrated with smartphone platform has a sensitive detection of Cd 2+ with the LOD of 0.1 μM in rice samples. The method reported here might have great application prospects in real-time monitoring of foods safety and environmental protection., Competing Interests: Declaration of Competing Interest There are no conflicts to declare., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Many lanthanide ions-based probes have been widely used for detecting anthrax spores biomarker-dipicolinic acid (DPA). However, little work has realized detection of bacillus anthrax spores in real environmental samples. In this work, a novel ratiometric fluorescent nanoprobe based on europium (Eu)-doped silicon nanoparticles (Eu@SiNPs) was fabricated for the first time by one-pot method without post-modification for determination of the DPA in bacillus subtilis spores (simulant bacillus anthrax spores). Based on Eu(III) in the Eu@SiNPs could be sensitized by DPA to emit intrinsic fluorescence and the fluorescence intensity of SiNPs in the Eu@SiNPs almost remained stable, a new ratiometric fluorescent method for determination of micro DPA in bacillus subtilis spores and bacillus subtilis spores in real environmental samples, such as Yellow river water, tap water and soil was established. Under the optimum conditions, the limit of detection (LOD) of the method toward bacillus subtilis spores was as low as 2.38×10 4 spore/mL. Simple, fast and visual DPA and bacillus subtilis spores determination was also achieved by the Eu@SiNPs-based test paper. Therefore, the newly established method was expected to be a powerful tool for efficiently determination of bacillus anthrax spores to avoid anthrax threats., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Increasing environmental concerns about organic waste in paper mill effluents demand alternative wastewater management technology. We reported novel activation of fulvic acid-like in paper mill effluents using hydrogen peroxide (H 2 O 2 ) as oxidizer and titanium oxide (TiO 2 ) as catalyst. Spectroscopic characteristics of fulvic acid-like in paper mill effluents before and after activation (PFA and PFA-Os, respectively) were compared with a benchmark fulvic acid extracted from leonardite (LFA). Results indicated that PFA-Os exhibited less lignin structures, more functional groups and lower molecular weight than PFA, sharing much similarity with LFA. Among PFA-Os with varying degrees of oxidation, PFA-O-3 activated with 1:2 vol ratio of paper mill effluent and 30% H 2 O 2 for 20 min digestion at 90 °C stands out to be the optimal for further examination of its biological activity. Bioassays with rice seed/seedling indicated that applications of LFA at 2-5 mg-C/L and PFA-O-3 at 60-100 mg-C/L significantly increased rice seed germination rate and seedling growth under salt stress imposed with 100 mM NaCl. The mechanism was mainly through reduced oxidative damage via activation of antioxidative enzymes and lipid peroxidation. This study provides the needed technical basis of safer and cleaner technologies for innovative management of paper mill effluents., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Enteromorpha prolifera-derived Fe 3 C/C composite has been fabricated through a facile one-step calcination method. As an advanced Fenton-like catalyst, the obtained Fe 3 C/C composite displayed high catalytic reactivity to generate hydroxyl radicals. It is worth to note that the removal rate of methylene blue (MB) could effectively reach 100% in a wide pH range (pH = 2˜12) and the maximum degradation capacity of the composite is 660 mg/g. The stability and reusability of Fe 3 C/C composite catalyst have also been tested, which could remain the removal rate at 100% after 6 consecutive runs. To illustrate the practical application possibility, the Fe 3 C/C composite catalyst was used for degradation of papermaking and dyeing waste water, which could reduce the COD (chemical oxygen demand) value to less than 50. Additionally, the antibiotic norfloxacin (NOR) could also be catalytically removed by the Fe 3 C/C composite and the possible removal pathway has also been proposed. The excellent removal performance of Fe 3 C/C composite for MB and NOR may be attributed to the synergistic effect between porous carbon adsorption and Fe 3 C catalysis. This study not only provides novel insights into recycling of waste biomass, but also paves a new way for the application of Fe 3 C/C in dyes and antibiotics waste water treatment areas., (Copyright © 2019. Published by Elsevier B.V.)

In this study we reported the development of a paper-based algal biosensor for the optical detection of nanoencapsulated-atrazine, a forefront nanoformulated herbicide with a high effective post-emergence herbicidal activity. In particular, the unicellular green photosynthetic algae Chlamydomonas reinhardtii was immobilised on a paper substrate soaked with an agar thin film and placed in a glass optical measurement cell, obtaining a totally environmental-friendly device. Nanoencapsulated-atrazine was detected by following the variable fluorescence (1-V J ) parameter, which decreased inversely proportional to the herbicide concentrations, in a range between 0.5 and 200 nM, indicating a linear relationship in the measured dose-response curves and a detection limit of 4 pM. Interference studies resulted in a very slight interference in presence of 2 ppm copper and 10 ppb arsenic at safety limits, as well as a slight matrix effect and a satisfactory recovery value of 96 ± 5% for 75 nM nanoencapsulated-atrazine in tap water. Stability studies were also performed obtaining a good storage stability up to 3 weeks. Results demonstrated the suitability of the proposed paper-based optical biosensor as a valid support in smart agriculture for on site, environmental friendly, cost effective and sensitive nanoencapsulated-atrazine analysis., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The wide occurrence of pharmaceuticals in aquatic environments urges the development of cost-effective solutions for their removal from water. In a circular economy context, primary paper mill sludge (PS) was used to produce activated carbon (AC) aiming the adsorptive removal of these contaminants. The use of low-cost precursors for the preparation of ACs capable of competing with commercial ACs continues to be a challenge. A full factorial design of four factors (pyrolysis temperature, residence time, precursor/activating agent ratio, and type of activating agent) at two levels was applied to the production of AC using PS as precursor. The responses analysed were the yield of production, percentage of adsorption for three pharmaceuticals (sulfamethoxazole, carbamazepine, and paroxetine), specific surface area (S BET ), and total organic carbon (TOC). Statistical analysis was performed to evaluate influencing factors in the responses and to determine the most favourable production conditions. Four ACs presented very good responses, namely on the adsorption of the pharmaceuticals under study (average adsorption percentage around 78%, which is above that of commercial AC), and S BET between 1389 and 1627 m 2  g -1 . A desirability analysis pointed out 800 °C for 60 min and a precursor/KOH ratio of 1:1 (w/w) as the optimal production conditions., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Plastic and polythene as hydrophobic materials become a grave concern due to their non-biodegradable nature, cumbersome recycling and waste management. Cuticular wax derived from Calotropis procera is explored as an eco-friendly and safe hydrophobic material. The effects of duration of exposure to solvent, solvent type, size and side of the leaf on cuticular wax yield have been studied. Leaf with the smallest area (10 cm 2 -25 cm 2 ) was found to be the most suitable to isolate the wax. GC-MS analysis of the wax revealed that the wax consists of mainly esters, alkane and alkene. Mitochondrial reductase (MTT) and lactate dehydrogenase (LDH) assay have been carried out on M5S cell line at various concentrations and the results indicate that up to 1 μg/ml (acetone as solvent) and 3 μg/ml (chloroform as solvent) use of wax has no toxic effect. To evaluate the hydrophobic potential of the wax in developing hydrophobic paper water regains and contact angle has been measured. The gain in hydrophobicity of the paper is evident from the rise in contact angle (≥90˚) of paper coated with wax. Scanning electron micrograph and FTIR spectra generated physical and chemical evidence of coating of wax on paper., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Due to high pollution load and colour contributing substances, pulp and paper mill effluents cause serious aquatic and soil pollution. A lignin-degrading bacterial strain capable of decolourising Azure-B dye was identified as lignin peroxidase (LiP) producing strain LD-5. The strain was isolated from pulp and paper mill effluent contaminated site. Biochemical and 16S rDNA gene sequence analysis suggested that strain LD-5 belonged to the Serratia liquefaciens. The strain LD-5 effectively reduced pollution parameters (colour 72%, lignin 58%, COD 85% and phenol 95%) of real effluent after 144h of treatment at 30°C, pH 7.6 and 120rpm. Extracellular LiP produced by S. liquefaciens during effluent decolourisation was purified to homogeneity using ammonium sulfate (AMS) precipitation and DEAE cellulose column chromatography. The molecular weight of the purified lignin peroxidase was estimated to be ∼28kDa. Optimum pH and temperature for purified lignin peroxidase activity were determined as pH 6.0 and 40°C, respectively. Detoxified effluent was evaluated for residual toxicity by alkaline single cell (comet) gel electrophoresis (SCGE) assay using Saccharomyces cerevisiae MTCC 36 as model organism. The toxicity reduction to treated effluent was 49.4%. These findings suggest significant potential of S. liquefaciens for bioremediation of pulp and paper mill effluent., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The paper industry is one of the most significant industrial branches that contributes to water pollution. Recent studies regarding the chemical composition of wastewaters from modern paper production sites are sparse, and organic contaminants originating from this source may remain undetected and uncontrolled. Therefore, for this study, non-target screening analyses of wastewaters from five different paper production sites were performed, including an extended analysis of one facility, for the identification of volatile non-polar to semi-polar organic contaminants. The identified contaminants were also traced in the adjacent river. Several specific agents related to paper production, including photoinitiators, ink and thermal paper constituents, were present in most wastewaters and were therefore considered to be characteristic paper industry contaminants. A couple of contaminants identified in this study are being reported for the first time and might be toxic, but have been neglected in previous studies. Bisphenol A and 2,4,7,9-tetramethyl-5-decyne-4,7-diol were found in untreated wastewaters, treated wastewater and in river water. Bisphenol A was present in river water downstream from where the paper industry discharges at a concentration that was reported to affect the reproduction of gastropods. Thus, our findings imply that paper industry discharges pose a risk to the populations of sensitive macroinvertebrates., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Photocopiers emit high levels of nanoparticles (PM0.1). To-date little is known of physicochemical composition of PM0.1 in real workplace settings. Here we perform a comprehensive physicochemical and morphological characterization of PM0.1 and raw materials (toners and paper) at eight commercial photocopy centers that use color and monochrome photocopiers over the course of a full week. We document high PM0.1 exposures with complex composition and several ENM in toners and PM0.1. Daily geometric mean PM0.1 concentrations ranged from 3700 to 34000 particles/cubic-centimeter (particles/cm(3)) (GSD 1.4-3.3), up to 12 times greater than background, with transient peaks >1.4 million particles/cm(3). PM0.1 contained 6-63% organic carbon, <1% elemental carbon, and 2-8% metals, including iron, zinc, titania, chromium, nickel and manganese, typically in the <0.01-1% range, and in agreement with toner composition. These findings document widespread ENM in toner formulations and high nanoparticle exposures are an industry-wide phenomenon. It further calls attention to the need to substantially redesign the interface of this technology with workers and consumers., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The production of paper pulp by the Kraft method generates considerable amounts of wastes. Namely, lime mud generated in the recovery circuit of chemical reagents, biological sludge from the wastewater treatment of wood digestion process and fly ash collected in the fluidized bed combustor used to generate electricity from biomass burning. The final destination of such wastes is an important concern, since environmental regulations are becoming stricter regarding their landfill. Driven by this fact, industries are looking for more sustainable solutions, such as the recycling in distinct products. This work tested these wastes as secondary raw materials to produce clinker/cement that was then experienced in mortar formulations. The first step involved the residues detailed characterization and a generated amounts survey. Then, specific but simple steps were suggested, aiming to facilitate transport and manipulation. Distinct blends were prepared and fired in order to get belitic and Portland clinkers. The Portland clinkers were processed at lower temperatures than the normally used in the industry due to the presence of mineralizing impurities in some wastes. Belite-based cements were used to produce mortars that developed satisfactory mechanical strength and did not reveal signs of deterioration or durability weaknesses., (Copyright © 2014 Elsevier B.V. All rights reserved.)