Search

A small-aperture receiving array occupying a small area provides convenience for the layout of high-frequency (HF) radars. However, this kind of antennas has a wide beam, which adversely affects the wave measurements. To solve this problem, a method for extracting wave parameters from wide-beam radar echoes, which models current variations across the beam, is proposed in this article. The nondirectional wave spectrum is extracted from the echoes of a small-aperture HF radar, and wave parameters such as the significant wave height, peak, and mean wave period are then calculated from it. Simulation is carried out to assess the performance of the method for different current velocities, radar frequencies, and wind conditions. The proposed method is then applied to a nine-day dataset collected by a multifrequency HF radar with a circular receiving array (MHF-C) radar for further validation via comparisons between the radar-estimated and the buoy-measured wave parameters. Some factors that may affect the performance of wave height measurements are analyzed, such as the signal-to-noise ratio and radial current velocity. The correlation coefficient (CC) between the radar-estimated and the buoy-measured significant wave height is 0.90, and the root mean square difference (RMSD) is 0.51 m. For the mean wave period, the CC is 0.61 and the RMSD is 0.67 s. The results demonstrate that the significant wave height and the mean wave period extracted by the proposed method are consistent with the buoy-measured values, and the proposed method can overcome the broadening influence of the Doppler spectrum caused by ocean currents. [ABSTRACT FROM AUTHOR]

In this article, we propose a novel processing algorithm for frequency-modulated continuous-wave (FMCW) ice sounding radar, which addresses the along-track focusing of internal reflecting horizons. It is a modified frequency scaling algorithm that can handle the two-layer medium imaging model as well as the Doppler impact of the motion within the sweep in a nadir-looking radar. The proposed algorithm’s comprehensive derivation and implementation processes are described. In the range-Doppler domain, a really effective formulation for radar signals is also presented, which considers refraction effects and electromagnetic wave propagation velocity changes at the interface of two different media. Point target simulations are carried out to demonstrate the algorithm’s performance. The proposed method is also tested on the real data acquired by the shallow-layer-detection ice sounding radar (SLDISR). The result shows the applicability of the proposed method for imaging the ice sheet. [ABSTRACT FROM AUTHOR]

This article presents detailed geometric analyses of ground clutter in bistatic passive airborne radars. Analytic closed-form solutions are derived for finding the intersection of iso-ranges and iso-velocities. This allows clutter bistatic coordinates to be easily converted to its Cartesian coordinates. Based on those solutions, a theoretical clutter map in the bistatic coordinates can be calculated assuming uniform clutter distribution on the Earth’s surface. This is done by first converting a resolution cell in the bistatic coordinates into a corresponding cell in the Cartesian coordinates. Next, the power distribution in the bistatic coordinates is calculated taking into account range dependency, incident angles, and the radiation patterns of the transmitter and the receiver. The aim of this analysis is to characterize clutter in terms of expected mean power map rather than in terms of statistical distribution. The obtained results provide insights into the expected characteristics of clutter, which can be helpful in designing signal processing algorithms for ground moving target indication (GMTI) and synthetic aperture radar (SAR). The theoretical clutter distribution on the range-velocity map is compared with real-life data acquired with a Digital Video Broadcasting–Terrestrial (DVB-T)-based passive radar and good agreement between theory and measurement is presented. [ABSTRACT FROM AUTHOR]

Ambiguity clutter for airborne radar systems is usually caused by a uniform pulse repetition interval (UPRI) waveform, which significantly degrades target detection and location performance. To address this issue, this article proposes an ambiguity clutter suppression method resorting to a pseudorandom pulse repetition interval (PrPRI) waveform. First, an airborne radar clutter model accounting for multiple range rings with PrPRI waveform is developed. Next, a nonuniform coherent processing framework is introduced to eliminate the clutter folded in the range and Doppler domain. In particular, the reasons for the enlargement of the area free of clutter corresponding to PrPRI mode are analyzed, as well as the maximum unambiguous Doppler frequency, maximum unambiguous range, and design principles for PRI are derived. Finally, numerical examples are designed to verify that the nonuniform coherent processing framework can enlarge the clutter-free area and achieve unambiguity target detection and location. [ABSTRACT FROM AUTHOR]

A large time-bandwidth product bistatic radar offers several advantages in high-resolution target detection and motion parameter estimation, but the scale factor and inner-pulse Doppler will also be introduced in the radar echoes when detecting high-speed targets. Under this condition, the conventional matched filter will cause a certain energy loss and a nonnegligible shift of the range center, which is called mismatch effect. Considering the special geometries of the bistatic radar, we first establish the precise echo signal (PES) model to describe the radar echoes for high-speed targets in a space–air-based bistatic radar system. By analyzing the mismatch effect within the pulse and the migration between pulses, we have obtained the mathematic relationship between the scale factor, inner-pulse Doppler shift, range, equivalent velocity, and acceleration. Following that, we perceive that the parameters of the matched filter are related to the target motion parameters, i.e., a priori unknown, which inspires us to propose an iterative coherent integration method to achieve the intrapulse and interpulse integration. A PES model matched filter with initial parameters is defined and a roughly motion parameter estimation is acquired by the PES model-based Keystone transform (PES-KT) and inner-pulse chirp Fourier transform (CFT). The estimated parameters are used for matched filter construction and coherent integration. This process is performed over multiple iterations to provide an accurate motion parameter result. In the end, a target detection experiment is given to show the effectiveness of the proposed method using space–air-based bistatic radar. [ABSTRACT FROM AUTHOR]

Airborne multichannel high-resolution radar (HRR)-ground moving target indication (GMTI) is of great significance to wide-area surveillance, traffic monitoring, and target recognition. The Aerospace Information Research Institute, Chinese Academy of Sciences, produced an advanced airborne digital array radar with high resolution and conducted an experiment with slow and weak cooperative moving targets in 2021. In this article, an overall processing framework for target detection, parameter estimation, and target tracking using this system is introduced. For HRR detection, the echo energy of targets is spread into multiple range units, so-called range-spread targets; thus, using detectors designed for pointlike targets will severely degrade the detection performance, especially for slow and weak targets. To address the adaptive detection of such range-spread targets embedded in Gaussian clutter with an unknown covariance matrix, a novel two-step generalized space–time adaptive processing (GSTAP) algorithm is proposed, which offers an enhanced clutter suppression capability compared with natural competitors. Moreover, a tracking method is implemented in the range-Doppler domain to avoid track loss caused by azimuth relocation error and reject discrete false alarms. Both simulation and experimental results are presented to demonstrate the effectiveness of the proposed method and provide a paradigm for further research. [ABSTRACT FROM AUTHOR]

The global navigation satellite system (GNSS)-based passive radar shows potential for permanent maritime surveillance. In this article, the GNSS signals are exploited for vessel target imaging. From the obtained radar image, meaningful information about the vessel, such as its shape, position, length, and orientation can be extracted. In addition, the vessel is observed from different angles by spatially diverse GNSS satellites, and the multistatic geometry enables to enhance the imagery quality. The main drawback of GNSS-based passive radar stays in its limited power budget. And the inaccessible motion makes the noncooperative vessel smeared using conventional radar imaging methods. To address the problems, at first, each bistatic echo over a long observation time is integrated with the range and Doppler (RD) domain after removing the 2-D migrations. The signal-to-noise ratio (SNR) can be increased after the step. Then, with respect to a particular target velocity, the local Cartesian plane is constructed, and the multiple RD maps are projected and combined in the plane to obtain the multistatic image. In view of the inaccessibility of target kinematic parameters, such imaging processing is modeled as an optimization problem, where vessel’s velocity is set as a decision variable and the aim is to minimize the image entropy. Finally, the particle swarm optimization (PSO) algorithm is applied to solve the optimization problem, after which a well-focused vessel image can be obtained. In May 2021, we have successfully carried out the world’s first BeiDou-based passive radar maritime experiment, and the effectiveness of the proposed method is verified against the experimental data. [ABSTRACT FROM AUTHOR]

This article presents a new method to retrieve dynamic information from spaceborne Doppler radar observations. The method is based on a complex convolution Doppler resampling (CConDoR) formulation, which links the spaceborne pulse-pair (PP) correlation measurements to high-resolution PP products that are not affected by the spacecraft motion. The CConDoR formalism allows to easily simulate Doppler products via convolution products. The CConDoR representation enables also retrievals by deconvolution. This approach is illustrated using a Wiener deconvolution algorithm. Results are shown for simulations of the radar of the Earth Cloud Aerosol Radiation Explorer (EarthCARE; developed by the European and Japanese space agencies). The proposed corrections improve the accuracy of the measured mean velocities (by correcting for nonuniform beam-filling (NUBF) biases) and spectral widths (by correcting for the spectral broadening), which to the best of the authors’ knowledge is novel. [ABSTRACT FROM AUTHOR]

Multiple radar systems represent an attractive option for target tracking because they can significantly enlarge the area coverage and improve both the probability of trajectory detection and the localization accuracy. The presence of multiple extended targets or weak targets is a challenge for multiple radar systems. Moreover, their performance may be severely deteriorated by regions characterized by a high clutter density. In this article, an algorithm for detection and tracking of multiple targets, extended or weak, based on measurements provided by multiple radars in an environment with heavily cluttered regions, is proposed. The proposed method features three stages. In the first stage, past measurements are exploited to build a spatiotemporal clutter map in each radar; a weight is then assigned to each measurement to assess its significance. In the second stage, a track-before-detect algorithm, based on a weighted 3-D Hough transform, is applied to obtain target tracklets. In the third stage, a low-complexity tracklet association method, exploiting a lion reproduction model, is applied to associate tracklets of the same target. Three experiments are presented to illustrate the effectiveness of the proposed approach. The first experiment is based on synthetic data, the second one is based on actual data from a radar network with two homogeneous air surveillance radars, and the third one is based on actual data from a radar network with four different marine surveillance radars. The results reveal that the proposed method can outperform competing approaches. [ABSTRACT FROM AUTHOR]

Borehole radar is a powerful tool for detecting subsurface fractures. Fracture modeling and numerical simulation are essential means to study fracture detectability. In this article, we first propose a method to construct a single fracture model, which combines the Baecher disk model and random rough surface and includes features, such as roughness, pinch-out, and irregularity. As the precise description of the fracture raises the requirement for accuracy of the simulation algorithm, the 3-D conformal finite-difference time-domain (CFDTD) method is used in this work. Numerical simulations of a sphere and rough fractures show that the CFDTD has higher calculation accuracy than conventional FDTD. Then, we analyzed how the fractures with different roughness affect the electromagnetic wave response. It is found that as the fracture surface becomes rougher, the wave scattered by it becomes stronger, more fracture contour-related information is obtained, and the fracture morphology is recovered better. Combined with accurate fracture modeling and high-precision numerical simulation, the electromagnetic response characteristics of different forms of fractures are obtained, which provides a basis for the accurate detection and interpretation of fractures in the future. [ABSTRACT FROM AUTHOR]

Radar sounders (RSs) are gaining importance in planetary missions thanks to their unique capability of providing direct measurements of subsurface (SS) structures. To support their design and data interpretation, several electromagnetic (e.m.) simulation techniques have been developed with enhanced capabilities for emulating the RS acquisition process. However, the raw simulated radargrams obtained from e.m. simulators are difficult to interpret and analyze without a focusing operation, which results in an underestimation of the RS detection performance. While frequency methods for range and azimuth compression of real RS data are well-established, their use on simulated data is not addressed in the literature and requires major modifications. This article presents a novel method that implements azimuth compression using unfocused and focused processing on simulated raw data. The proposed method is based on an adaptation of the range-Doppler algorithm to the case of raw data generated by a coherent RS simulator. The method is demonstrated in three case studies to show the similarity between simulated and real data processing: 1) simple geometries; 2) a simulated SHAllow RADar (SHARAD) radargram compared with the real data product; and 3) a real application scenario for supporting the design of a new RS instrument. The results indicate higher fidelity of the focused simulated data with the real data product and the target structure, confirming the usefulness of the proposed approach in obtaining realistic processing of simulated radargrams. [ABSTRACT FROM AUTHOR]

Spaceborne radar sounders are high frequency (HF)/very high frequency (VHF) nadir-looking sensors devoted to subsurface investigations. Their data interpretation can be severely hindered by off-nadir surface clutter. Recent literature showed that the clutter suppression capabilities of this class of systems can be greatly enhanced by deploying an array of orbiting sensors in formation flight synthesizing a narrow radar antenna beam. In this article, we assess the capability of distributed radar sounding to discriminate clutter from subsurface returns by exploiting direction of arrival (DOA) estimation techniques. This is achieved by first outlining an approach for designing and evaluating the distributed radar sounder DOA estimation performance as function of the radar system parameters (e.g., intersensor distance) and external noise factors such as ionospheric scintillations. Then, the theory is complemented by radar simulations of several acquisitions over Greenland assuming a variety of subsurface geometries. The simulations confirm that clutter discrimination through DOA estimation is a viable approach to further improve the array capability in disambiguation of subsurface echoes from surface ones. [ABSTRACT FROM AUTHOR]

Weather radar echo extrapolation, which predicts future echoes based on historical observations, is one of the complicated spatial–temporal sequence prediction tasks and plays a prominent role in severe convection and precipitation nowcasting. However, existing extrapolation methods mainly focus on a defective echo-motion extrapolation paradigm based on finite observational dynamics, neglecting that the actual echo sequence has a more complicated evolution process that contains both nonlinear motions and the lifecycle from initiation to decay, resulting in poor prediction precision and limited application ability. To complement this paradigm, we propose to incorporate a novel long-term evolution regularity memory (LERM) module into the network, which can memorize long-term echo-evolution regularities during training and be recalled for guiding extrapolation. Moreover, to resolve the blurry prediction problem and improve forecast accuracy, we also adopt a coarse–fine hierarchical extrapolation strategy and compositive loss function. We separate the extrapolation task into coarse and fine two levels which can reduce the downsampling loss and retain echo fine details. Except for the average reconstruction loss, we additionally employ adversarial loss and perceptual similarity loss to further improve the visual quality. Experimental results from two real radar echo datasets demonstrate the effectiveness of our methodology and show that it can accurately extrapolate the echo evolution while ensuring the echo details are realistic enough, even for the long term. Our method can further be improved in the future by integrating multimodal radar variables or introducing certain domain prior knowledge of physical mechanisms. It can also be applied to other spatial–temporal sequence prediction tasks, such as the prediction of satellite cloud images and wind field figures. [ABSTRACT FROM AUTHOR]

For a space-based radar system with hybrid baseline, the problem of clutter angle-Doppler spectral broadening poses a significant challenge to clutter cancellation in the terrain fluctuant observation scene. To improve the robustness of clutter suppression, this article proposed a homogeneous sample selection method based on a novel concept of generalized spatial spectrum density function (GSSDF). This method can be summarized as three crucial steps. First, the GSSDF was constructed by the prior information of digital elevation model (DEM) data, radar system parameters, and the backscattering model. Then, the angle of deflection (AOD) and the equivalent bandwidth (EBW) of GSSDF were adopted to measure the diffusion of clutter spectral. Subsequently, the sample selection criterion was established by a new threshold detection strategy, but the key here is that an appropriate detection threshold of the AOD and EBW can be determined by the characteristic of filter response. To summarize, this approach ensures that the training samples sharing similar clutter properties can be selected to estimate clutter covariance matrix (CCM), thereby enhances clutter suppression capability. Finally, the experimental results demonstrated that the proposed method can obtain better clutter suppression performance than the other contrast methods. [ABSTRACT FROM AUTHOR]

Radar echo extrapolation is a common approach to weather nowcasting, which has become a significant support to detect potential disastrous weather a few hours ahead. The dynamics pattern inside an echo intensity sequence is beneficial for echo prediction. However, existing extrapolation methods have limited ability to consider entire time-series echo context in an entire echo sequence from a given historical timestamp to a given future timestamp, thus leading to low long-term extrapolation accuracy. To solve this issue, we introduce spatiotemporal self-attention and propose a deep learning model named the nonlocal echo dynamics (NLED) network to capture the dependencies of the entire time domain. The NLED network has an encoder–decoder architecture for extrapolation. The encoder decomposes historical echoes into features of multiple spatial scales, which makes it better at learning echo dynamics from the global scale to the local scale. The decoder employs nonlocal blocks with sparse self-attention related to echo dynamics to learn correlations in the entire echo event, which is beneficial for predicting long-term echo distributions. Our model is evaluated on radar reflectivity datasets from Shanghai and Hong Kong. The experimental results indicate that the NLED model achieves a more accurate long-term forecast and alleviates the forgetting of stronger echo dynamics, thus validating the effectiveness of entire time-series modeling by the NLED network. [ABSTRACT FROM AUTHOR]

Dynamic deformation measurement is an important approach to monitor structure stability. Due to its rapid imaging capabilities, ground-based multi-input–multi-output (GB-MIMO) radar has shown great application potential in bridge structure monitoring. This article proposes a dynamic deformation estimation method based on radar image series. First, an improved clutter suppression method is used to overcome the estimation error in complex working status. Second, a two-step pixel extraction method is adopted to ensure both the quantity and quality of sample pixels. Finally, frequency- and time-domain environmental stimulating methods are jointly considered for stable mode shape estimation. This article systematically measured the dynamic deformations of bridge structures, including two suspension bridges and a cable-stayed bridge. The time-series deformation, deflection, vibration frequency, and amplitude on the bridge structure are obtained by image-domain measurement. For the first time, the mode shapes of bridges are obtained through GB-MIMO radar. The correctness of structure parameter measurement is verified with the finite element model (FEM). Experimental results prove that with the proposed method, stable results could be acquired against weak and complex stimulation conditions. [ABSTRACT FROM AUTHOR]

The holographic subsurface radar (HSR) has been a promising geophysical electromagnetic technique for detecting shallowly buried targets with high lateral resolution image. However, radar images are considerably interpreted by strong reflections from rough surface and inhomogeneity in media of interest. In this article, we focus on mitigating the clutter in HSR applications using a learning-based approach, which requires neither prior information regarding the penetrable medium characteristics nor analytic framework to describe the through-medium interference. The generative adversarial network (GAN) with attentive subspace projection is developed to remove the clutter and recover the target image. The subspaces containing target response are selected with the multihead attention preliminarily. Then, the generative network will further focus on the target regions, and the discriminative network will assess the generated results locally and globally. Experiments using real data were conducted to demonstrate the effectiveness of our approach. The visual and quantitative results show that the proposed approach achieves superior performance on removing clutter in HSR images compared with the state-of-the-art clutter mitigation approaches. [ABSTRACT FROM AUTHOR]

In this paper, a feature extraction technique based on the electromagnetic (EM) representation of radar signals is presented. In particular, we focus on ground-penetrating radar (GPR) imaging, where we model the backscatter from varying 2-D geometric shapes with arbitrary local coordinate rotations. Due to the electrically small nature of buried targets and the bending of the radar signal at the air–soil interface, we focus on exact methods to model the surface current density induced on scattering surfaces. Overcomplete basis sets are derived from the EM descriptions to represent the scene sparsely. From this proposed modeling framework, we devise a novel methodology to exploit the prediction of scattering behavior to extract features for classification from radar scenes when multiple buried scattering surfaces are present. We see that our method can identify and reconstruct buried scattering geometries in the presence of false targets that are brought about by the nonlinear nature of the exact EM modeling methods. A noniterative algorithm based on the conjugate of Green’s function is developed to solve for the surface current in an unknown domain using multifrequency, multiaperture data. Our modeling and feature extraction algorithms are numerically validated for different target shapes buried in lossy soil profiles. [ABSTRACT FROM AUTHOR]

In this article, we propose a novel solution to detect multiple targets using a distributed multiple-input multiple-output (MIMO) radar under the so-called “defocused transmit-defocused receive” operating mode. The proposed method employs a grid-based data matching algorithm, aiming to associate the target responses to potential target locations, solving the resulting data puzzle that evaluates the various cells under test (CUTs) in the surveillance area resulting from the intertwined range cells across all transmit-receive channels. Sketchily, the approach divides the surveillance area into identically interlocking and analytically expressible grid cells and then selects the grid cells with the best fitting multichannel data to be equivalently regarded as the CUTs. Next, the generalized likelihood ratio test (GLRT) detector is derived to test for target presence in each of the selected grid cells. A separate procedure is introduced to eliminate the spurious “shadow targets,” false alarms occurring in the grid cells without a target while sharing range cells with the targets. The essence of this procedure is to find the source of the observed contributions to the grid cells whose test statistics exceed their thresholds, and simultaneously obtain the positions of the targets. The proposed method is evaluated using both numerical simulations and experimental data recorded by five small radars, demonstrating the effectiveness of the proposed technique. [ABSTRACT FROM AUTHOR]

In a recent study, a 2-D pseudospectral time-domain (PSTD) full-wave simulator was developed and demonstrated to be capable of efficiently solving large-scale low-frequency (e.g., HF) electromagnetic scattering problems, for example, on the application of radar sounding simulations of planetary clutter and subsurfaces. In this article, the 2-D PSTD simulator is applied to simulate a domain as large as 4000 $\lambda $ (along-track) $\times 1666.67\,\,\lambda $ (cross-track) $\times 33.33\,\,\lambda $ (depth) with $\lambda =15$ m at an HF frequency of 20 MHz. To accomplish the goal, the simulator is further improved to efficiently model/simulate large cross-track slices of dielectric scenes by allowing nonuniform grid sampling in horizontal (lateral) and vertical directions, and the cross-track results are then stitched together along the track to form the simulated radargram. By combining the SHAllow RADar (SHARAD) viewing geometry and Mars Orbital Laser Altimeter (MOLA) digital elevation model (DEM), we simulate SHARAD returns at three different sites on Mars: one at the North Pole and two at Oxia Planum. At all three sites, the PSTD simulated radargrams are compared with measured SHARAD radargrams. Through power-level calibration and reference time adjustment, the PSTD simulated power estimates are further validated by comparing with real power observations from SHARAD with a 5-dB uncertainty and Pearson correlation coefficient of 0.3–0.4 (a $p$ -value on the order of $10^{-9}$), which justifies the use of the 2-D PSTD simulator for emulating surface clutter in planetary radar sounding. This simulator is open source and can be easily modified to support radar sounding simulations in support of other planetary missions with radar sounding instruments. [ABSTRACT FROM AUTHOR]

Coherent microwave radar can provide reasonable wave heights, while wave periods are always overestimated. The “group-line” in the wavenumber–frequency spectrum is a possible mechanism to interpret the overestimation, but the previous model cannot fully explain it. To address the issue, a new model integrating with the breaking and its evolution is proposed for microwave composite sea surface scattering. The upwind-grazing Doppler characteristics for coherent microwave radar under VV polarization are analyzed. The model is validated by comparing the results between the simulation and the radar observation. It explains the creation of “group-lines” in the wavenumber–frequency spectra and indicates that the short waves generated after breaking and their evolution should be the dominant reason for the overestimation of wave period using coherent microwave radar. The result can provide a theoretical basis for improving the performance of wave measurements with coherent microwave radar and for microwave ocean remote sensing. [ABSTRACT FROM AUTHOR]

This article puts forward a BeiDou-based passive multistatic radar (PMR) maritime moving target (MMT) detection technique via space–time hybrid integration (STHI) processing. Compared with passive bistatic radar (PBR), the utilization of multiple satellites provides an improvement in MMT detection performance, together with the capabilities of localization and velocity estimation. However, the multiple satellite transmitters cause the differences principally in bistatic range and Doppler centroid (DC) of the MMT. To integrate the PMR echoes, the biggest challenge is the two differences that need to be handled. In the proposed technique, first, the centroid-compensated keystone transform (CCKT) is proposed and applied to each PBR echo. It not only corrects range cell migration (RCM) but also equalizes the DC to the same. Then, the long-time integration is performed on each PBR echo, after which it is integrated into the range-Doppler frequency rate (DFR) domain. Finally, in order to settle the difference in bistatic range, an MMT position and velocity domain (i.e., the $X$ – $Y$ – $V$ domain) is constituted. The obtained multiple range-DFR maps are projected to the $X$ – $Y$ – $V$ domain, and then, the effective integration of multistatic echoes can be implemented. The final STHI result allows detecting the MMT reliably. Meanwhile, according to the 3-D position where the MMT is located in the $X$ – $Y$ – $V$ domain, the MMT can be localized, and its velocity can be estimated simultaneously. In May 2021, we have successfully carried out the world’s first BeiDou-based PMR MMT detection experiment, and the experimental results are given to prove the effectiveness of this technique. [ABSTRACT FROM AUTHOR]

Passive operation is an important operational concept for future airborne radar platforms. Successful target detection requires an understanding of the underlying clutter statistics in order to set the detection threshold accurately. In addition, clutter statistics are important for modeling of passive radar performance and simulation of passive bistatic radar to aid in the development of new target detection algorithms. In this article, the clutter statistics of data from an airborne platform are studied over a range of bistatic geometries and receive polarizations. The illuminator is a digital video broadcast-terrestrial (DVB-T) station and the collected data spans both ground and maritime regions. The key contributions include a study of amplitude statistics using a number of common distributions and understanding the impact of the reference signal quality in terms of the clutter statistics. [ABSTRACT FROM AUTHOR]

Radio frequency interference (RFI) has become a growing concern for weather radar, distorting radar variable estimation. By simultaneously or alternately transmitting the horizontal and vertical polarized waves, polarimetric weather radar can be referred to as SHV radar or AHV radar. The SHV radar can mimic the AHV radar by discarding either H- or V-channel measurements, which leads to an alternating scheme. In this research, the real RFI measurements from an operational C-band SHV radar are used to characterize the RFI temporal, spectral, and polarimetric features. Then, the RFI is simulated to quantify the performance of the object-orientated spectral polarimetric (OBSPol) filter in RFI mitigation. The OBSPol filter has been previously proposed by the authors to mitigate the narrowband clutter (both stationary and moving) and noise. This work extends the application of the filter to remove the RFI for SHV radar. Specifically, by taking advantage of the low copolar correlation of the RFI signal measured in AHV radar, the RFI mitigation method is designed, and its effectiveness is proven by qualitative and quantitative analyses. In particular, in the case of RFI overlapped to weather echoes in the time domain, the RFI can be mitigated, also when the duty cycle of the RFI is high. However, this work does not provide a full evaluation of the RFI mitigation performance on all radar data outputs but a proof of concept to show the effectiveness of the proposed filter for RFI mitigation. [ABSTRACT FROM AUTHOR]

Coherent microwave radar, which is a rapidly emerging tool to sense waves, usually utilizes the orbit velocities extracted from either temporal or spatial radar echoes. The distribution of energy in the wavenumber-frequency spectrum is changed by some nonlinear features, and correspondingly, this kind of method always provides a significantly overestimated wave period. To address this problem, a novel inversion algorithm, which utilizes the spatial and temporal returns collected with a recently developed coherent S-band radar, is proposed for retrieving wave parameters. A 2-D Fourier transform is applied to the spatial-temporal matrix of velocities to estimate the wavenumber-frequency spectrum. Then the wavenumber-frequency spectrum is integrated over the wavenumber domain to obtain the 1-D velocity spectrum. And the wave height spectrum is estimated from the 1-D velocity spectrum by the direct transform relationship between the 1-D velocity spectrum and the wave height spectrum. Later, significant wave heights and mean wave periods can be derived by the zeroth and first moments of the wave height spectra, respectively. The algorithm is validated using simulation and real data. An approximately four-day dataset collected with a shore-based coherent S-band radar deployed at Beishuang island during a typhoon period is reanalyzed and used to retrieve significant wave heights and mean wave periods. Comparisons between the measurements of radar and wave buoy are conducted, and radar-derived and buoy-measured wave parameters are in a reasonable agreement with a coherent coefficient over 0.9. The results indicate that the proposed method is effective for wave measurements using coherent S-band radar. [ABSTRACT FROM AUTHOR]

Ship tracking facilitates a comprehensive insight into maritime traffic situations and ensures its safety and security. However, with the current operational surveillance systems, detecting several maritime threats is still a major challenge. In this article, we propose a supportive ship tracking concept using an airborne-based radar sensor. The proposed tracking algorithm is suitable for dense multitarget scenarios. Tracking is performed in the range-Doppler domain. The primary advantage of using the range-Doppler domain is that ships even with low radar cross section moving with certain line-of-sight velocity appear out of the clutter region, thus improving their detectability. In addition, a powerful track management system is also developed to handle false targets. The simulated and real experimental results from the DLR’s airborne radar sensors, F-SAR and DBFSAR, are presented to prove the concept. [ABSTRACT FROM AUTHOR]

The Goldstone Solar System Radar (GSSR) facility is the largest fully steerable ground-based radar in the world for nonclassified high-resolution ranging and imaging of planetary and small-body targets. Over the years, the use of the GSSR to detect and characterize near-Earth objects (NEOs) has become critical to keep track of potential Earth-impacting hazardous NEO. This article relates the specific modifications made to the GSSR hardware and procedures in the last few years, as well as the new capabilities derived from those upgrades: reduced complexity in remote operations, increased experimental design versatility, and increased performance on bistatic radar experiments from GSSR to other complexes. In addition, we dedicate a section to provide an update on the current GSSR power capabilities as the new klystrons are installed. The work detailed in this article is intended to reach the broader science community in order to communicate how those modifications and the derived new capabilities can make science experiments more successful. [ABSTRACT FROM AUTHOR]

Marine X-band radar has been suggested to be capable of monitoring significant wave heights in both offshore and open sea areas. In contrast to studies on offshore radar, significant wave height estimations from coastal radar images, which exhibit complicated radar backscattering features, have received little attention. This study proposes a method for retrieving the significant wave height from coastal areas that are often influenced by nononshore winds. The square root of the signal-to-noise ratio in radar images has been widely applied to estimate the significant wave height. However, nononshore wind cases show a poor correlation between the square root of the signal-to-noise ratio and the in situ significant wave height. In addition, the spectral shapes from radar images in nononshore wind cases are very different from those in onshore wind cases. To improve the significant wave height estimations from coastal radar images, we implement an artificial neural network algorithm. After training and testing the algorithm, we confirm that the estimated significant wave heights are more reliable for both onshore and nononshore wind cases if the square root of the signal-to-noise ratio, power from nearshore radar subimages, and in situ wind components are included in the input layer of the neural network. [ABSTRACT FROM AUTHOR]

For the convenience of target feature extraction, classification, and recognition, it is necessary to research the imaging projection plane (IPP) of spaceborne hybrid synthetic aperture radar (SAR) and inverse SAR (ISAR) imaging results of ship target on the sea surface. In this article, a novel analysis approach of IPP is proposed, by which the expressions of IPPs can be derived under the condition of different rotation and ship’s bow directions. Then, the representation of radar image can be predicted in advance, i.e., top view, side view, or hybrid view of the target. Finally, the simulated and real measured data are processed to generate the radar images to verify the correctness of conclusions in this article. [ABSTRACT FROM AUTHOR]

We present new high-resolution snow depth data on Arctic sea ice derived from airborne microwave radar measurements from the IceBird campaigns of the Alfred Wegener Institute (AWI) together with a new retrieval method using signal peakiness based on an intercomparison exercise of colocated data at different altitudes. We aim to demonstrate the capabilities and potential improvements of radar data, which were acquired at a lower altitude (200 ft) and slower speed (110 kn) and had a smaller radar footprint size (2-m diameter) than previous airborne snow radar data. So far, AWI Snow Radar data have been derived using a 2–18-GHz ultrawideband frequency-modulated continuous-wave (FMCW) radar in 2017–2019. Our results show that our method in combination with thorough calibration through coherent noise removal and system response deconvolution significantly improves the quality of the radar-derived snow depth data. The validation against a 2-D grid of in situ snow depth measurements on level landfast first-year ice indicates a mean bias of only 0.86 cm between radar and ground truth. Comparison between the radar-derived snow depth estimates from different altitudes shows good consistency. We conclude that the AWI Snow Radar aboard the IceBird campaigns is able to measure the snow depth on Arctic sea ice accurately at higher spatial resolution than but consistent with the existing airborne snow radar data of NASA Operation IceBridge. Together with the simultaneous measurements of the total ice thickness and surface freeboard, the IceBird campaign data will be able to describe the whole sea-ice column on regional scales. [ABSTRACT FROM AUTHOR]

Lake ice thickness (LIT), a thematic product of lakes as an essential climate variable (ECV), is sensitive to changes in air temperature and on-ice snow mass. Here, a novel and efficient analytic method (retracking approach) is presented for the estimation of LIT from Ku-band (13.6 GHz) radar altimetry data. The new retracker, referred to as ${{\mathtt {LRM}}\_{}{\mathtt {LIT}}}$ , is based on the physical modeling of the conventional radar echoes (also called low-resolution mode or LRM) over ice-covered lakes that show a characteristic step-like feature in their leading edge attributed to the reflection of radar waves at the snow–ice and ice–water interfaces. The method is applied to Jason-2 and Jason-3 data acquired over Great Slave Lake, Canada, over three ice seasons (2013–2016). As expected, the agreement between the Jason-2 and Jason-3 LIT estimates over their overlapping period (2016 ice season) is excellent with a mean bias error of 0.013 m and root mean square error (RMSE) of 0.024 m. LIT estimates from ${{\mathtt {LRM}}\_{}{\mathtt {LIT}}}$ are in good agreement with simulations from a thermodynamic lake ice model and in situ measurements with RMSE values of the order of a few centimeters for the three winter seasons. The retracker also provides a robust way to assess the accuracy of LIT estimates which is in the order of 0.10 m when the ice cover is well established and prior to melt onset. In addition, ${{\mathtt {LRM}}\_{}{\mathtt {LIT}}}$ captures the seasonal transitions during the freeze-up and breakup periods and ice growth over different winter seasons, making it a promising method for monitoring inter-annual variability and trends in LIT from past and current conventional radar altimetry missions. [ABSTRACT FROM AUTHOR]

Geolocation is one of the key synthetic aperture radar (SAR) image processing procedures in SAR-based remote-sensing applications. The conventional SAR imagery geolocation model is based on the range-Doppler (RD) equation, which is derived from the Fresnel approximation of SAR. Currently, there is no other rigorous geolocation model for modern high-resolution SAR; however, this approximation may not be fully applicable for various modern SAR imaging modes and algorithms. This study aims to develop a novel SAR image geolocation model based on the SAR range history (RH) equation, which is derived from the basic SAR backscattered signal property. Moreover, a new geometric calibration model is presented for RH-based locations. Experiments based on real spaceborne SAR data are presented as examples, and the location accuracy of RH and RD location models are compared. The results show that the location accuracies of the RH and RD models are consistent under the existing SAR processing framework, but those for the RH model demonstrate better performance in the azimuth direction. In theory, the proposed RH model can be used for SAR image products generated from complex modes and non-Fresnel-approximation-based imaging algorithms, making it suitable for future SAR systems. [ABSTRACT FROM AUTHOR]

For weather radar, although a phased array system is useful for rapid scanning, its development cost is several times higher than that of radar with a dish-type antenna, and it requires relatively more antenna elements, analog-to-digital converters, and phase shifters. To reduce antenna elements with the devices of phased array systems, array geometry in a random or triangular pattern is often used. However, relatively fewer antenna elements result in observation accuracy degradation due to the increased sidelobe level or the wider beamwidth. We employ compressive sensing (CS) processing [i.e., L1 minimization (L1) and basis pursuit denoising (BPDN)] to reduce the number of antenna elements. We conducted numerical simulations for point and distributed like targets and discussed the observation accuracy using L1 and BPDN. Compared to the estimations made using a full array antenna, where BPDN can be estimated with extremely high accuracy given a 25% reduction in antenna elements, we also applied CS to real measurement data obtained using the PAWR. The BPDN was also very effective for measurement data. The novelty of the study is highlighted in its discussion of the feasibility of applying CS in observation data with the PAWR. The study findings provide a reference for development cost reduction and the mass production of PAWR. [ABSTRACT FROM AUTHOR]

Hyperbola detection is an important application field of ground-penetrating radar (GPR) systems as underground threats and targets detected by these systems are presented in the form of a hyperbola. However, the low-amplitude hyperbola detection of deeply-buried targets and targets with low metal content has remained a major challenge due to the increase in the attenuation of radar echo with an increase in the detection depth and the features with low resolution extracted by existing methods. In this study, first, a high-level visual feature, namely, phase symmetry, is proposed to effectively improve the feature resolution and the robustness of amplitude change in GPR images. Then, we propose a handcrafted feature descriptor based on phase symmetry, namely, histogram of oriented vector phase symmetry (HOVPS) to improve the detection of hyperbola in GPR images. In constructing HOVPS, we first cite our previous work to enhance the descriptive ability of hyperbola in GPR images. Subsequently, we extend a phase symmetry model to develop a vector feature model [namely, vector phase symmetry (VPS)]. Finally, HOVPS is developed based on the VPS to extract structural information from GPR images. The proposed HOVPS describes the shape features in GPR images using a symmetrical structure, and it is used as the feature input of the classifier for hyperbola detection. The qualitative analysis of the proposed method is performed by comparing the performance of the proposed method for the extraction of features on different GPR data with those of other methods. In addition, we also provide quantitative analysis on different signal-to-noise ratio (SNR) test sets, and the results reveal that the proposed method outperforms various state-of-the-art methods (e.g., GPR histogram of oriented gradient (gprHOG), edge histogram descriptor (EHD), and log-Gabor (LG) feature). [ABSTRACT FROM AUTHOR]

Currently, sea-ice thickness is often estimated using microwave radar altimetry. It is well known that radar measurements are highly dependent on the roughness characteristics of the observed scene and can have a profound effect on altimetry-based thickness estimates. This simulation-based study highlights the importance of sea-ice roughness parameterization in the context of radar altimetry. This work provides a new sea-ice roughness parameterization in the form of an elevation spectrum developed from field campaign data. The formulation of this elevation spectrum is partly based on the generalized power law. Simulations have been developed to predict electromagnetic scattering from surfaces described by the new spectrum, with a focus on the X-band (10 GHz) scattering with nadir incidence. In this work, both the analytical small slope approximation and numerically exact Method of Moments are applied to various sea-ice surface spectra, representing a wide range of surface roughness conditions. The results show that the normalized radar cross section of the sea-ice interface varies significantly depending on the surface elevation spectrum and the statistics of the rough interface. Comparisons with numerically exact methods show that analytical approximations to rough surface scattering work reasonably well for the cases considered here, except at large scattering angles. [ABSTRACT FROM AUTHOR]

This article presents an universal circular synthetic aperture radar (SAR) (UCSAR) by which the targets to be observed at any radial distance can be imaged, thus making SAR imaging possible in a more general scenario with a circular movement of the radar platform. The UCSAR point spread function (PSF) is firstly analyzed based on the time-domain correlation imaging approach, and thus a three-dimension (3-D) spatial variant PSF of the target can be formulated. The closed-form PSF expressions with single-frequency and frequency-modulated continuous wave (FMCW) transmitted signals are derived respectively to quantify the imaging resolutions, showing that the PSF is a product of a sinc function and a zeroth-order Bessel function when using a wideband FMCW signal. Secondly, a fast UCSAR imaging algorithm and its further simplified version are proposed to reduce the computational cost significantly based on the piecewise constant Doppler (PCD) principle. To quantify the imaging performance, we derive an error function of the slant range approximation for the proposed algorithm, serving as a practical guideline for the UCSAR parameter selection. Finally, the simulation and experimental results are provided to validate the PSF analysis, the fast imaging algorithm, and the implementation of the proposed UCSAR. [ABSTRACT FROM AUTHOR]

Cross-resolution enhancement for airborne high-squint radar (AHSR) imagery is mathematically equivalent to the ill-conditioned problem of inverse-scattering reconstruction. Although a variety of inversion methods with regularization can be introduced to advance the field of AHSR imagery, they turn out to be computationally intensive when extended to 2-D (range and cross-range dimension) image formulation due to the range-by-range calculation for the space-variant inversion operators over the full range swath. To tackle the problem of efficiency, this article presents a low-complexity inverse-scattering strategy. Our underlying idea is to equalize the space-variant Doppler centroid embedded in an inversion operator for a reference range cell using Doppler centroid compensation. With the proposed strategy, the necessary computational complexity required for 2-D AHSR inverse-scattering reconstruction can be significantly reduced by requiring only the calculation of the inversion operator, independently of the number of range cells. Our experimental assessment, conducted using both the simulation and real data, demonstrates that our proposed inverse-scattering strategy offers preferable computational reduction in the task of inverse-scattering reconstruction for 2-D AHSR imagery without resolution loss. [ABSTRACT FROM AUTHOR]

The X-band dual-polarization radar can provide raindrop size distribution (DSD) data at a continuous spatiotemporal scale; however, the traditional empirical-formula-based DSD retrieval methods for X-band radar are limited by high uncertainty and poor generality such as differences due to rainfall type, seasons, and geographical environment. This study identified strong correlations between polarimetric radar variables and various climatic and geographical elements. Two random-forest-based DSD retrieval models, one using only X-band radar parameters as the model input (RF-DSD) and the other containing multielement inputs as well (RF-M-DSD), were established using datasets from 18 sites in China. This study also evaluated the proposed models using different error indices over three test sites. Compared with the traditional DSD retrieval model for X-band dual-polarization radar, RF-DSD and RF-M-DSD showed improved predictive ability for all DSD parameters. The root-mean-square error (RMSE) values for $D_{0}$ (median volume diameter parameter), ${\text {log}}_{10}N_{w}$ (normalized intercept parameter), and $\mu $ (shape parameter) were 27%, 55%, and 39% lower, respectively, for RF-DSD, and 48%, 68%, and 43% lower, respectively, for RF-M-DSD. Finally, the DSD retrieval models were applied on one CLA-12A X-band radar in the Jiangsu Province. The DSD retrieval results suggest that the proposed models perform well on radar observation data with low uncertainty especially for $D_{0}$ and ${\text {log}}_{10}N_{w}$. Summary reveals that the RF-M-DSD performs superior and has stable DSD retrieval capabilities across different geographical areas, which can provide reliable radar-DSD retrieval data for areas with scarce disdrometer data. [ABSTRACT FROM AUTHOR]

This is the first presentation of quasi-synchronous spaceborne synthetic aperture radar (SAR) high-resolution images acquired from C-band Radar Constellation Mission (RCM) and RADARSAT-2 consisting of quad-polarization (HH + HV + VH + VV) wide-swath observations of Hurricane Epsilon. These measurements clearly show that the denoised HV- and VH-polarized normalized radar cross sections (NRCSs) have great consistency. NRCS values at HV- and VH-polarizations are more sensitive to wind speeds and less sensitive to incidence angles or wind directions than those at HH and VV for hurricane force winds. For large incidence angles and high wind speeds, the sensitivity of HH-polarized NRCS to wind speed is higher than that of VV. HH- and VV-polarized NRCSs gradually lose wind direction dependency at high winds. It is notable that the time interval between the two SAR acquisitions is only 3 min. This allows for a direct comparison of HV- and VH-polarized images to investigate the variations in high-resolution backscattering within the hurricane vortex, thereby revealing the most dynamical areas. An asymmetric dynamic is observed around the eye of Hurricane Epsilon, based on positive and negative differences (VH–HV) in the western and eastern parts of the eye. The impacts of rain on quad-polarized NRCS are also examined using collocated rain rates from the Global Precipitation Mission (GPM) and wind speeds from the Soil Moisture Active Passive (SMAP). Significant rain-induced NRCS attenuations are about 1.7 dB for HH and VV, and 2.2 dB for HV and VH, when the rain rate is 20 mm/h. These attenuations are associated with rain-induced turbulence and atmospheric absorption. This work shows that the collocated RCM and RADARSAT-2 hurricane observations provide a unique analysis of synoptic and joint C-band measurements of the ocean surface in quad-polarization; this is noteworthy in view of preparations for the next generation of dual-polarization scatterometer (SCA) onboard second-generation meteorological operational satellite program (MetOp-SG). [ABSTRACT FROM AUTHOR]

Drone-borne ground-penetrating radar (GPR) has proven to be efficient and promising for high-resolution topsoil moisture mapping at the field scale. However, in practice, the radar incident angle may change as a function of the terrain slope and unstable flying conditions. In this respect, we analyzed the effect of radar incident angle on full-wave inversion for soil permittivity characterization. Specifically, using the frequency-domain radar equation, antenna characteristic functions with different incident angles were determined for a horn antenna as an example. Then, numerical analyses and field measurements were performed to quantify the errors on the retrieved permittivity resulting from incident angle drifts. In agreement with the radar equation concept, we observed that the angle- and frequency-dependent global transmission functions of the antenna correspond well to its radiation pattern. Numerical and field results show that errors in the permittivity estimation can be very significant as a function of the antenna radiation pattern and the incident angle. Nevertheless, if the incident angle is known and the characteristic antenna functions are determined as a function of the incident angle, full-wave modeling and inversion remain accurate, provided that the signal-to-noise ratio remains sufficient. [ABSTRACT FROM AUTHOR]

Two examples of low grazing angle radar sea clutter, both well-described by the compound $K$ -distribution model, are studied. Pulse Doppler processing is applied to obtain 2-D range–time textures for the intensity, centroid, and width of the Doppler spectrum. The first example exhibits a monochromatic swell pattern, allowing phase averaging to be applied to the textures. The second example has a more typical ocean wave spectrum. The intensity textures are gamma-distributed, consistent with the compound $K$ -distribution model, but the Doppler spectrum centroid and width textures are also found to be gamma-distributed. Based on this analysis, a new method for simulation of coherent radar sea clutter is proposed, where separate memoryless nonlinear transformations are applied to a simulated water surface to generate the spatially and temporally varying intensity, centroid, and width of the Doppler spectrum. The method builds on the evolving Doppler spectrum model for radar sea clutter simulation and established methods for simulation of water surfaces. [ABSTRACT FROM AUTHOR]

Despite the development of point-based interferometric synthetic aperture radar (InSAR) time-series methods, such as persistent scatterer interferometry (PSI), it remains difficult to identify reliable measurement points (MPs) in areas under vegetated cover. In this study, we developed a new algorithm, improved combined scatterers interferometry with optimized point scatterers (ICOPS), to monitor changes in surface deformation by combining persistent scatterers (PSs) and distributed scatterers (DSs). The algorithm was subsequently improved through the application of a machine learning process. A generalized likelihood ratio test (GLRT) was applied to identify statistically homogeneous pixels suitable for a small SAR dataset. A machine learning-based optimization process was used to overcome the increase in MPs after the combined scatterers interferometry (CSI) process. The MP optimization process used the support vector regression (SVR) algorithm to find the optimal point from all MPs in the dataset. To improve the reliability of the MP surface deformation mapping after optimization, the optimized hot-spot analysis (OHSA) method was applied to obtain spatially clustered MPs; this was possible despite a low deformation identification rate. To demonstrate the effectiveness of the ICOPS method, we applied this approach to Yellowstone Lake in the USA using 95 SAR images from the Sentinel-1 satellite that was taken during the period of 2017–2020. The CSI method produced an increase in MP density, especially in areas not covered by PSI, which indicated its ability to detect deformations in mountainous areas. Comparisons with GPS data and traditional methods produced promising results with an accuracy of 1 cm/year in terms of the root mean square error (RMSE). The optimization process in CSI also had the advantage of retrieving helpful information in the MP dataset and increased the accuracy of CSI by 12%. Deformation mapping using the optimized results provided new insights regarding the spatial clustering of surface deformation in MPs. This could provide the foundation for developing a posttime-series optimization process based on point scatter as a surface change detection tool. [ABSTRACT FROM AUTHOR]

A joint design of the transmit weight sequence and receive filter is proposed to improve target information acquisition in high-resolution radar. First, using the criterion for target information acquisition maximization, the design is cast as a nonconvex fractional quadratically constrained quadratic problem (QCQP). Then, by employing a bivariate auxiliary function introduced in Dinkelbach’s algorithm to decouple the fractional objective function, an algorithm with polynomial computational complexity is developed to solve the QCQP using a cyclic maximization procedure alternating between two semidefinite relaxation (SDR) problems. Through exploiting a suitable rank-one decomposition, it is verified that the optimal solution obtained from the alternative iterative process is also optimal to the original QCQP. Finally, numerical examples are presented to demonstrate the performance of the proposed design. [ABSTRACT FROM AUTHOR]

This article proposes a cognitive radar (CR) framework to improve the performance of the estimation and recognition for range-extended targets. To overcome the angular uncertainty and exploit the temporal correlation of target signatures, we introduce the static multimodel approach and the exponential correlation model to describe the dynamics of target signatures. The estimate of target signatures and the probability distribution of target hypotheses are updated recursively in response to the latest echo, ruled by the Bayesian theory. A waveform optimization module is integrated into the framework, which designs the waveform for the next emission according to the knowledge extracted from the echo history. A design criterion based on mutual information (MI) is derived, which implies the average estimation capability for all target hypotheses and the mean between-hypotheses divergence. The proposed method is examined using both synthetic data and electromagnetic (EM) simulation data of realistic targets. [ABSTRACT FROM AUTHOR]

In recent years, trees in European countries have been increasingly endangered by emerging infectious diseases (EIDs). In the United Kingdom (U.K.), this has been observed to affect whole woodlands and forests, threatening the existence of some types of trees. Although quarantine measures have been taken to limit the spreading of such diseases, this has not yet been effectively controlled leading to millions of trees affected by EIDs. Ground-penetrating radar (GPR) has proven effective in identifying critical features on diseased trees for detection of EIDs spread. However, the irregular shape of tree trunks and their complex internal structure represent real challenges for conventional GPR measurements and data processing methodologies. In this research, a dual-polarized GPR system is used to detect internal decay in tree trunks using novel signal processing methodologies. A polarimetric correlation filter based on Bragg scattering on a 3-D Pauli feature vector and an arc-shaped Kirchhoff migration are discussed in detail. The proposed polarimetric correlation filter is utilized to enhance the signal-to-noise ratio (SNR) of B-scans due to bark and tree trunk high-loss properties of tree trunks. Meanwhile, an arc-shaped Kirchhoff migration algorithm is performed to counteract the influence of the bark irregularity. The proposed data processing framework is successfully validated with measurements on a real tree trunk, where cross sections were subsequently cut for comparison purposes. Outcomes from the proposed methodology demonstrate a high consistency with the features observed on the tree trunk cross sections, indicating the reliability of the proposed detection scheme for assessing tree-decay associated with EIDs. [ABSTRACT FROM AUTHOR]

This article proposes a new synthetic aperture radar (SAR), named as panoramic SAR, based on a combination of linear and rotational SARs, by which a large 360° panoramic view of the observed scene can be reconstructed. First, the system geometry and its imaging process based on the back-projection algorithm (BPA) are presented. The combined movement constitutes a 2-D synthetic aperture, and thus higher imaging resolutions can be obtained. The corresponding resolution analysis and the sampling criteria are discussed accordingly. Then, a novel dynamic piecewise compensation (DPC) algorithm, a recursive imaging process, is proposed to reduce the processing complexity significantly. The imaging implementation and the complexity are also studied respectively. Finally, a prototype of panoramic SAR is built based on an frequency-modulated continuous wave (FMCW) radar and a moving platform, and the simulation and experimental results are provided to validate the proposed panoramic SAR principle and the DPC algorithm. [ABSTRACT FROM AUTHOR]

Global navigation satellite system (GNSS)-based passive bistatic radar (PBR) has many advantages benefiting from the bistatic configuration and the excellent properties of the GNSS signals. In this article, the possibility of moving target indication (MTI) using a GNSS-based PBR is analyzed and illustrated by experiments. The power budget is first evaluated to investigate the capabilities and limitations of the GNSS-based PBR. Due to the low power density of GNSS signals, long-time integration is required to achieve long-range surveillance. In our previous work, a Radon Fourier transform (RFT)-based long-time integration algorithm has been proposed for GNSS-based PBR. However, the RFT-based methods are computationally inefficient. In this article, a novel MTI algorithm based on high frame rate image sequence (HFRIS) is introduced to the GNSS-based PBR. Benefiting from the avoiding of the iterative multidimensional parameter searching, it has a higher computational efficiency than the RFT-based methods. At the same time, the possibility of multistatic positioning for moving targets using the GNSS-based PBR is analyzed. It is shown that the absolute position of the target in three dimensions could be determined if at least three satellites are utilized to measure the range delay of the target return. To confirm our analysis, experiments are conducted which detects the airplanes using the GPS signals as illuminators of opportunity. The collected data are processed by both the RFT-based method and the HFRIS-based method. Both methods have successfully detected the airplane target at a distance of about 5 km and the HFRIS-based method shows a far better performance in terms of processing efficiency. The multistatic positioning experiment is also conducted and the estimated position of the target is well consistent with the values acquired by the flight record, which shows the potential of the GNSS-based PBR on multistatic operations. [ABSTRACT FROM AUTHOR]

As a wideband radar system, a synthetic aperture radar (SAR) may conflict with several electromagnetic systems, such as frequency modulation (FM), TV, and other communication systems. These signals, termed as radio frequency interference (RFI), may severely interfere SAR systems from generating a high-resolution image. Numerous previous researches focused on the RFI suppression problem, among which the semiparametric methods have been verified to have the state-of-the-art performance. However, most of the semiparametric methods are computationally expensive and can hardly be used on wide-swath SAR imaging processing. In this article, an efficient semiparametric algorithm is proposed to suppress RFIs via alternating projections. It has comparable performance as the other methods but significantly improves the computational efficiency a lot. It is able to remove both narrowband and wideband RFIs and can be used directly on the Level-1 SAR data. Finally, multiple real SAR data are provided to demonstrate the effectiveness and efficiency of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Low-frequency radar sounders have the potential to generate altimetric profiles, but the feasibility of utilizing planetary radar sounding data as an alternative to laser altimetry has not been assessed using existing data to date. Therefore, we have developed, implemented, and evaluated an algorithm to process SHAllow RADar sounder (SHARAD) data on Mars (Experiment Data Records as available on the planetary data system) first into altimetry profiles and ultimately into digital terrain models (DTMs). The minimally processed data are pulse compressed, corrected for ionospheric distortion, zero-Doppler filtered, and incoherently summed. We then apply pulse re-tracking techniques adapted from terrestrial ocean altimetry to identify the surface return. From the surface return we compute the time-of-flight and hence the range from the spacecraft to the surface of the planet. The altimetry groundtracks are then co-registrated with Mars Orbiter Laser Altimeter (MOLA) to remove any biases resulting from residual ionospheric effects or timing issues. The altimetric profiles are finally used to create DTMs based on SHARAD data. While the SHARAD altimetry data have coarser inherent resolution than laser altimeters or imaging radars, we demonstrate that radar sounding data is still a viable source for satellite-based altimetry measurements. This is particularly important for future planetary missions not carrying laser altimeters but radar sounders, such as the upcoming Europa Clipper mission. [ABSTRACT FROM AUTHOR]

Radio spectrum bands allocated to spaceborne synthetic aperture radar (SAR) imagery are shared by multiple missions. In practical radio spectrum environments, these bands are also used by some ground radars, e.g., C-band weather radar. Due to this fact, radio frequency interference (RFI) may occur for a spaceborne SAR when its received signals contain the transmitted waveforms from another SAR or radar operating at the same frequency band. This particular class of RFI is usually linear-frequency-modulation (LFM) signals, which can cause bright radiometric artifacts in focused SAR images. Most existing signal processing approaches designed for addressing this problem belong to the class of preprocessing methods, which removes RFI in level-0 raw radar data before SAR focusing. In this article, we propose a postprocessing kernel—2-D SPECtral ANalysis (2-D SPECAN) filter, for removing the class of LFM RFI in level-1 SLC images. The filtering consists of three main steps: Step 1: focus LFM RFI artifacts in SLC images as point-like responses in the spectral domain via 2-D SPECAN; Step 2: perform 2-D notch filtering in the spectral domain to remove the most contribution of the RFI responses; and Step 3: transform the filtered spectrum back into the SLC image domain using the inverse operation of the 2-D SPECAN. For computation efficiency, we design a simplified processing flow and adopt a blockwise processing strategy. Experiments with several Sentinel-1 SLC images demonstrate that severe RFI artifacts in SLC images can be removed significantly by the proposed method. [ABSTRACT FROM AUTHOR]