Two-Dimensional Spectral Analysis Filter for Removal of LFM Radar Interference in Spaceborne SAR Imagery.

Radio spectrum bands allocated to spaceborne synthetic aperture radar (SAR) imagery are shared by multiple missions. In practical radio spectrum environments, these bands are also used by some ground radars, e.g., C-band weather radar. Due to this fact, radio frequency interference (RFI) may occur for a spaceborne SAR when its received signals contain the transmitted waveforms from another SAR or radar operating at the same frequency band. This particular class of RFI is usually linear-frequency-modulation (LFM) signals, which can cause bright radiometric artifacts in focused SAR images. Most existing signal processing approaches designed for addressing this problem belong to the class of preprocessing methods, which removes RFI in level-0 raw radar data before SAR focusing. In this article, we propose a postprocessing kernel—2-D SPECtral ANalysis (2-D SPECAN) filter, for removing the class of LFM RFI in level-1 SLC images. The filtering consists of three main steps: Step 1: focus LFM RFI artifacts in SLC images as point-like responses in the spectral domain via 2-D SPECAN; Step 2: perform 2-D notch filtering in the spectral domain to remove the most contribution of the RFI responses; and Step 3: transform the filtered spectrum back into the SLC image domain using the inverse operation of the 2-D SPECAN. For computation efficiency, we design a simplified processing flow and adopt a blockwise processing strategy. Experiments with several Sentinel-1 SLC images demonstrate that severe RFI artifacts in SLC images can be removed significantly by the proposed method. [ABSTRACT FROM AUTHOR]