Search

Earthquakes nucleate when large amounts of elastic energy, stored in the earth's crust, are suddenly released due to abrupt sliding over a fault. Fluid injections can reactivate existing seismogenic faults and induce/trigger earthquakes by increasing fluid pressure. Here we develop an analogous experimental system of simultaneously loaded and wetted absorbent porous paper to quantify theoretically the process of wetting‐induced earthquakes. This strategy allows us to gradually release the stored energy by provoking low intensity tremors. We identify the key parameters that control the outcome of the applied injection strategy, which include the initial stress state, fault segmentation, and segment‐activation rate. Subsequent injections, initiated at high stress levels, can drive the system faster toward its instability point, nucleating a large earthquake. Starting at low stress levels, however, they can reduce the magnitude of the natural event by at least one unit. Plain Language Summary: Understanding natural and anthropogenic seismicity is a major scientific challenge. Here we present a novel analogue fault model using absorbent porous paper, which gives new insights on earthquake mitigation. When scaled to in‐situ conditions, the porous paper model represents a natural seismic rupture of magnitude Mw = 5.9. By progressively wetting it, we simulate fluid injections in the earth's crust and draw analogies to large‐scale industrial projects. In our experiments, each injection is accompanied by tremors, which progressively release energy and modify the energy budget of the system. Without precise knowledge of the fault properties, we risk driving the system faster toward an unexpected large seismic event. However, provided that the model's key parameters–fault segmentation, segment‐activation rate, and stress state–are well known or controlled, the natural rupture can be mitigated by at least one unit. We expect that these results will facilitate risk reduction in current fluid injection projects and inspire earthquake mitigation strategies for real tectonic faults. Key Points: From an energetic point of view, absorbent porous paper can be an ideal, low‐cost surrogate rock material for studying induced seismicitySegmentation of faults and sequential fluid injection in each segment can mitigate potential earthquakes by at least one order of magnitudeWe show that fault segmentation, segment‐activation rate and stress state predominantly control the result of applied injection strategies [ABSTRACT FROM AUTHOR]

Lightning channel morphology depends on the thunderstorm cloud charge structure, which in turn is influenced by the thunderstorm dynamics. In this paper, based on three‐dimensional radiation source localization data from the Lightning Mapping Array and radar‐based data, our analysis shows that the overall morphology and detailed morphology of the lightning channel correspond to different eddy dissipation rate (EDR) characteristics. Lightning with complex channel morphology occurs in regions with large EDRs. In single lightning events, channels that extend directly within a certain height range without significant bifurcation and turning tend to propagate in the direction of decreasing EDRs, while channel bifurcations and turns usually occur in regions with large radial velocity gradients and large EDRs. This study shows the relationship between channel morphology and thunderstorm dynamics and provides a new method for the direct application of channel‐level localization data to understand thunderstorm dynamics characteristics. Plain Language Summary: Turbulence in thunderstorms affects the charge distribution, which in turn affects the lightning channel morphology. Thus, the lightning channel morphology can reflect the characteristics of turbulence. The current understanding of the correlation between the two is still limited to the relationship between macroscopic thunderstorm dynamic characteristics and lightning activity. In this paper, the relationship between the morphology of the lightning channel and turbulence characteristics is investigated based on the Lightning Mapping Array (LMA) localization data and the cube root of the eddy dissipation rate (EDR) estimated from KABX radar‐based data. The turbulence strength affects the overall morphology of lightning, and lightning with complex morphology tends to occur in regions with large EDRs. In single lightning events, channels extending directly within a certain altitude range tend to propagate in the direction of decreasing EDRs, and lightning channel bifurcation or turning tends to occur in regions with large EDRs. This paper establishes the relationship between thunderstorm electricity and thunderstorm dynamics by using lightning channel morphology as a bridge and provides a new method for the direct application of channel‐level localization data to understand thunderstorm dynamics characteristics. Key Points: The morphology of lightning channels can reflect the distribution of turbulence intensity, and a certain correlation between the two existDirectly extended lightning channels tend to propagate in the direction of decreasing eddy dissipation ratesThe location of the channel bifurcations or turns often corresponds to regions with high eddy dissipation rates [ABSTRACT FROM AUTHOR]

Changes in precipitation patterns with climate change could have important impacts on human and natural systems. Zhang et al. (2021, https://doi.org/10.1029/2020gl092293) report trends in daily precipitation patterns over the last five decades in the western United States, focusing on meteorological drought. They report that dry intervals (calculated at the annual or seasonal level) have increased across much of the southwestern U.S., with statistical assessment suggesting the results are statistically robust. However, Zhang et al. (2021, https://doi.org/10.1029/2020gl092293) preprocess their annual (or seasonal) averages to compute 5‐year moving window averages before using established statistical techniques for trend analysis that assume independence about some fixed trend. Here we show that the moving window preprocessing violates that independence assumption and inflates the statistical significance of their trend estimates. This raises questions about the robustness of their results. We conclude by discussing the difficulty of adjusting for spatial structure when assessing time trends in a regional context. Plain Language Summary: A recent paper reports trends in drought in the western United States, in particular increases in drought in the southwestern United States, based on changes in the lengths of time intervals without precipitation. In this "comment" we note that the preprocessing approach used in the paper artificially increases the apparent statistical signal in the data and caution that the evidence for the trends reported is not as strong as presented in the paper. We conclude by discussing the difficulty of estimating trends in a statistically rigorous fashion across multiple weather stations. Key Points: Statistical uncertainty about trends in droughts in the southwestern US is larger than reported in a recent GRL letter [ABSTRACT FROM AUTHOR]

Paciorek and Wehner raise important questions around our use of the Mann‐Kendall nonparametric trend test on smoothed data for analyzing long‐term hydrometeorological trends in Zhang et al. (2021, https://doi.org/10.1029/2020gl092293). We thank them for initiating this important conversation and their gracious cooperation in exploring the issues addressed in their comment. In this reply we confirm the inflation of significant p‐values by our choice to smooth, illustrate the relatively minor impacts on the main conclusions of our paper, and add our voices to those of Paciorek and Wehner in highlighting the lack of methodology for hypothesis testing across multiple stations that have spatial structure (i.e., testing for regionally consistent trends). Plain Language Summary: Our colleagues Drs. Paciorek and Wehner have raised concerns about our paper (Zhang et al., 2021, https://doi.org/10.1029/2020gl092293), which showed widespread increases in the duration of drought events over the last five decades in the western United States. They point out that our decision to smooth the data using a moving average inflated the number of weather stations at which the trends toward longer droughts were deemed significant by a statistical test. We agree with them on this point, and we have recomputed all our results using unsmoothed data to determine the impacts. We find that for most stations and regions, trend magnitudes remained largely unchanged, with many stations nearby one another often suggesting similar trends. Finally, we agree with Paciorek and Wehner that there is a lack of statistical methods to test such coherent regional patterns, and we caution that over‐reliance on p‐values limits the power of regional data to identify important climate trends. Key Points: We agree that smoothing to 5‐year moving windows introduced serial correlation into time series of annual statistics of daily rainfall data, inflating the number of weather stations individually showing significant trends (p < 0.05) with the Mann‐Kendall testRecomputation with unsmoothed values produced substantially the same dry intervals trend magnitude and direction at most stations individually and had only minimal impacts on dry interval trends computed for National Ecological Observatory Network domains using the Regional Kendall testNo perfect statistical approach leverages the capacity of coherent regional patterns among spatially correlated weather stations, and an over‐reliance on p‐values as a binary (significant vs. insignificant) determinant of trends limits the power of regional data [ABSTRACT FROM AUTHOR]

The fundamental features of one kind of rarely known stratocumulus, which was termed as "Millipede Cloud," occurred over the Eastern Pacific Ocean in 2017 were first documented by using Moderate Resolution Imaging Spectroradiometer (MODIS) satellite imagery. These clouds had long and meandering "central axes" extending from several hundreds to thousands kilometers, and a number of "radical cloud arms" extending several tens of kilometers in its two sides. Total 59 "Millipede Clouds," 4 and 55 of them, were formed over the Northern and the Southern Hemispheres, respectively. Their environmental backgrounds were analyzed by using ERA5 reanalysis data and MODIS sensor Level‐2 data. The cloud top pressures of these "Millipede Clouds" were between 850 and 800 hPa, and their top heights were about 1–2 km. There existed "inversion layer" of air temperature near the cloud tops at 800 hPa, which strongly suggested that these clouds were lower stratocumulus in essence. Plain Language Summary: "Millipede Cloud," one kind of rarely known stratocumulus which looks like "Millipede" shape, is termed for the first time in this paper. It has an obvious "central axis" and a number of well‐organized "radial cloud arms" in two sides of the "central axis" extending in several tens of kilometers length. This paper introduces the fundamental features of "Millipede Clouds" occurred over the Eastern Pacific Ocean in 2017 from the perspective of satellite image. Totally, 59 "Millipede Clouds" were found to occur over the Eastern Pacific Ocean. Their geographic distribution, cloud top features and vertical structure of one typical case on 16 July 2017 were documented. Key Points: The fundamental features of "Millipede Clouds" over the Eastern Pacific Ocean in 2017 were documented by using Moderate Resolution Imaging Spectroradiometer (MODIS) satellite imageryThe environmental backgrounds of these "Millipede Clouds" were analyzed by using ERA5 reanalysis data and MODIS dataThe cloud top pressures of these "Millipede Clouds" are between 850 and 800 hPa, and their top heights are about 1–2 km [ABSTRACT FROM AUTHOR]

This paper studies a new concept of using global navigation satellite system (GNSS) signals coherently reflected over relatively smooth ocean and ice surfaces from very low elevation angles (below ∼8°) and received by low Earth orbit (LEO) satellites to retrieve the tropospheric information. This approach can provide horizontal profiles of tropospheric zenith delay and total column water vapor (TCWV) with centimeter‐level high precision and spatial resolutions of tens of km by ∼1 km, depending on the elevation angle, with a sampling spacing of ∼100 m. This approach can potentially be applied to most sea ice and calm ocean areas and provide tropospheric sensing data, which can complement and augment existing observation systems. A few case studies are conducted in this paper using the Spire grazing‐angle GNSS‐R data. The retrieved TCWV is compared to ERA5 products and the Sentinel‐3 Ocean and Land Color Instrument measurements and shows promising performances. The errors associated with the GNSS‐R tropospheric measurements are also discussed. Plain Language Summary: The atmospheric water vapor is an important component for the weather and climate systems and is difficult to measure, especially over ocean and ice surfaces. This paper studies a new approach to measuring atmospheric water vapor using global navigation satellite system (GNSS) signals reflected off ocean and ice surfaces. If the reflection is from a low elevation angle (below ∼8°) and the reflected signal is coherent (all signal rays are reflected in the same direction), this approach can provide very high precision observation of the horizontal gradients of the tropospheric delay and the vertically integrated atmospheric water vapor with good spatial resolutions. This paper presents the methodology of the proposed approach and a few case studies to demonstrate the feasibility and performance by comparing the GNSS‐R retrieved water vapor measurements with models and the Sentinel‐3 satellite radiometry measurements. The errors associated with the GNSS Reflectometry (GNSS‐R) tropospheric measurements are also discussed. Key Points: A new tropospheric sensing concept is studied that relies on coherent‐reflection global navigation satellite system (GNSS) signals off ocean and ice surfacesAlgorithms are developed and demonstrated using Spire grazing‐angle GNSS‐R data to retrieve tropospheric delay and water vaporThe presented approach provides high‐precision tropospheric delay and total column water vapor horizontal profiles, as validated using the Sentinel‐3 Ocean and Land Color Instrument data [ABSTRACT FROM AUTHOR]

Extracting balanced geostrophic motions (BM) from sea surface height (SSH) observations obtained by wide‐swath altimetry holds great significance in enhancing our understanding of oceanic dynamic processes at submesoscale wavelength. However, SSH observations derived from wide‐swath altimetry are characterized by high spatial resolution while relatively low temporal resolution, thereby posing challenges to extract the BM from a single SSH snapshot. To address this issue, this paper proposes a deep learning model called the BM‐UBM Network, which takes an instantaneous SSH snapshot as input and outputs the projection corresponding to the BM. Training experiments are conducted both in the Gulf Stream and South China Sea, and three metrics are considered to diagnose model's outputs. The favorable results highlight the potential capability of the BM‐UBM Network to process SSH measurements obtained by wide‐swath altimetry. Plain Language Summary: Oceanic dynamic processes can be classified into two categories: balanced geostrophic motions (BM), including large‐scale circulation, mesoscale and submesoscale eddy turbulence, and unbalanced wave motions (UBM), including barotropic tides, and inertia–gravity waves (IGWs). Both types of motions coexist and have respective contributions to the sea surface height (SSH). How to extract the BM from the total SSH observations obtained by satellite altimetry is the crucial problem to be solved in this paper. To tackle this issue, we propose a deep learning model named the BM‐UBM Network to establish the relationship between the total SSH and the BM component. The BM‐UBM Network can generate SSH estimations for the BM when provided with a well‐resolved SSH snapshot. Key Points: A Deep learning model is developed to extract balanced motions from sea surface height snapshot based on a realistic simulationDiagnostics of three metrics reveal the effectiveness of the model in extracting balanced motionsThe model exhibits remarkable advantages over the Gaussian filter (baseline) in capturing the gradient and Laplacian information [ABSTRACT FROM AUTHOR]

Air‐entraining whitecaps provide an important source of bubbles over the global oceans, yet the rate at which the associated air is entrained is not well known. This lack of understanding limits the ability to accurately parameterize bubble‐mediated gas exchange and sea spray aerosol flux. In this paper I present a model to predict the total volume of air entrained by individual whitecaps and extend it to estimate the rate at which air is entrained per unit sea surface area. The model agrees well with existing models and measurements and can be forced by the rate at which energy is dissipated by the wavefield which can be routinely provided by spectral wave models. I then use the model to present the first distributions of the estimated total volume of air entrained by individual whitecaps, as well as their rate of air entrainment and air degassing. Plain Language Summary: The amount of air in the oceans in the form of bubbles at any given time is not well known because of the difficulty associated with making in‐situ measurements. This lack of knowledge inhibits how well ocean‐atmosphere exchange processes that are driven by air and bubbles can be represented in climate models. In this paper, I present a new model to estimate the volume of air entrained by individual breaking waves called whitecaps, as well as how quickly the air is entrained into the oceans and how quickly it leaves the oceans when bubbles rise to the surface and burst. Key Points: A model for the entrainment of air by oceanic whitecaps is presented which agrees well with existing models and measurementsDistributions of the estimated volume of air entrained by individual oceanic whitecaps are presented for the first timeKey uncertainties in the air fraction and entrainment velocities of individual whitecaps remain due to a lack of measurements [ABSTRACT FROM AUTHOR]

Heavy cold ions at Mars are gravitationally bound to the planet unless some process provides energy to them. Observations show that cold (<20 eV) and dense (∼>1 cm−3) O+/O2+ ions with bulk velocities equal to energies ∼1 keV can reach deep into the nightside Martian magnetosheath. These ions are co‐located with a change of the sign of the sunward component of the magnetic field. This magnetic field topology implies the persistence of a localized planetary ions escape channel associated with draped magnetic field lines that are convecting tailward. The observed ion populations propagate approximately in the same direction as surrounding magnetosheath flow and are likely to be almost unheated ionospheric ions from low altitudes. The paper discusses planetary ion energization via Hall electric field originated from ions and electron separation associated with magnetic field curvature. Plain Language Summary: In‐situ observations above the nightside of Mars show the presence of localized dense planetary ion fluxes at altitudes exceeding 2,000 km and escaping from the planet at high energies, comparable to that of the solar wind. These fluxes are accompanied by the reversal of sunward component of magnetic field. Unlike most atmospheric escape channels, the reported phenomenon is characterized by an increase in heavy to light ions density ratio with the distance from the planet at the observed altitudes up to nearly 5,000 km, as well as an increase in overall plasma number density inside this escape channel relative to the ambient sheath environment. This behavior is consistent with acceleration process initiated by a bent magnetic flux tube. Key Points: Ions of different species gain similar energies in the Martian magnetosheath by Hall electric fields associated with magnetic curvatureA high concentration of ionospheric ions correlates with a near void of shocked solar wind protons and a magnetic field reversalNumber density at the reversal increases with distance from Mars in comparison to the surrounding sheath at least till two Martian radii [ABSTRACT FROM AUTHOR]

The variability of Mars exosphere over monthly to solar‐cycle scales at 251 and 412 km altitude is quantified by analysis of 41‐Ls mean densities derived from precise orbit determination of the Mars Reconnaissance Orbiter (MRO) and Mars Odyssey (MO) satellites, respectively. The data encompass 2006–2020 (MRO) and 2002–2020 (MO). At both altitudes, most of the variance is captured by cos(Ls–ϕ), where ϕ ≈ 258°. This term represents the effects of solar heating changes due to the eccentricity of Mars orbit around the Sun, and climatological changes in heating due to lower‐atmosphere dust loading, which does not play a significant role. The remaining variability is connected with the "irregular" variability of solar flux over monthly time scales. For MO, the presence of Helium disrupts a clean correlation with these sources. Plain Language Summary: The force of continuous bombardment of atmospheric particles on a satellite slowly changes its orbit. By tracking the satellite, changes in its orbit can in turn be used to infer atmospheric particle densities. In this paper, we use tracking from NASA's Deep Space Network, an international array of giant antennas, to measure minute orbital changes of the Mars Reconnaissance Orbiter and Mars Odyssey satellite orbits (and thereby atmospheric densities) around Mars during the 2002–2020 time frame. These data are used to study how the outer regions of Mars atmosphere respond to changes in heating due to solar radation absorption by various chemical species, and by dust that is elevated into the atmosphere by strong winds near the surface. The major finding of this paper is that the variability of Mars outer atmosphere is mainly controlled by solar heating changes due to the eccentricity of Mars orbit around the Sun. Key Points: Densities from precise orbit determination of Mars Reconnaissance Orbiter and Mars Odyssey are used to quantify long‐term variability of Mars' exosphereThe annual term is the greatest contributor to total variance, followed by the irregular component of EUV/UV fluxDust‐induced inter‐annual variability is small, but the analysis method does suppress potentially important regional‐scale events [ABSTRACT FROM AUTHOR]

An array of atmospheric profile observations consists of three‐dimensional vectors representing pressure, temperature, and humidity, with each profile forming a continuous curve in this three‐dimensional space. In this paper, the Signature method, which can quantify a profile's curve, was adopted for the atmospheric profiles, and the accuracy of profile representations was investigated. The description of profiles by the signature was confirmed with adequate accuracy. The machine‐learning‐based model, developed using the signature, exhibited a high level of annual accuracy with minimal absolute mean differences in temperature and water vapor mixing ratio (<2.0 K or g kg−1). Notably, the model successfully captured the vertical structure and atmospheric instability, encompassing drastic variations in water vapor and temperature, even during intense rainfall. These results indicate the Signature method can comprehensively describe the vertical profile with information on how ordered values are correlated. This concept would potentially improve the representation of the atmospheric vertical structure. Plain Language Summary: The atmospheric profile can be visualized as a three‐dimensional curve representing pressure, temperature, and humidity. By utilizing the Signature method, we can measure and quantify the profile's curve, allowing for comprehensive modeling of the atmosphere. In this paper, we confirmed the accuracy of atmospheric profile representation using signatures and introduced the characteristics of signatures revealed through machine‐learning models. The description of profiles by the signature was confirmed with adequate accuracy. Moreover, the model demonstrated robust annual accuracy, with minimal temperature and water vapor discrepancies. It effectively captured the vertical structure and instability of the atmosphere, even during heavy rainfall, characterized by significant temperature and water vapor content fluctuations. Key Points: The utilization possibility of the Signature method for atmospheric profiles was confirmedBy utilizing the Signature method, we can measure and quantify the profile's curve, allowing for comprehensive modeling of the atmosphereThe machine‐learning model developed with the signature can predict the profiles with high annual accuracy [ABSTRACT FROM AUTHOR]

In this study, a method for assimilating FY4A advanced geostationary radiance imager (AGRI) cirrus‐effected radiances (CER) is investigated, and the impact of this method on water vapor analysis and rainstorm forecasting is examined through observing system simulation experiments and actual case experiments. The high proportion of inverted humidity profiles in the cirrus‐effected pixels is the main reason for the negative effect of assimilation in the mid‐to‐lower troposphere. To address this, relevant constraint conditions are incorporated into the cost function. The statistical results reveal that the addition of a CER assimilation improves the analysis increment of water vapor, with pattern correlation coefficients of 0.33, 0.35, and 0.20 at 200, 300, and 400 hPa, respectively, which are greater than those of a clear‐sky radiance assimilation (0.28, 0.33, and 0.17, respectively). Moreover, the inclusion of a CER assimilation greatly improves data utilization, and has a neutral to positive effect on precipitation forecasting. Plain Language Summary: Infrared all‐sky radiance assimilation is an attractive but challenging problem in satellite data assimilation. Is there an alternative approach to achieve the assimilation of infrared radiance for a certain type of cloud? It is found that cirrus clouds, which are loose ice clouds composed of ice crystals, can partially transmit infrared radiance and are large in number. Considering these advantages, a new direct assimilation method for FY4A advanced geostationary radiance imager (AGRI) cirrus‐effected radiances is proposed in this paper. The method addresses the uncertainty in the assimilation of cirrus‐effected radiances by adding weak constraints of inverse humidity. This research highlights the substantial increase in AGRI data usage when incorporating cirrus‐effected radiance data, as well as the neutral‐to‐positive impact on water vapor analysis and precipitation forecasting. This study also suggests that future endeavors could combine infrared channels with lower‐level microwave channels, which may have a more significant contribution to infrared radiance assimilation. Key Points: A high percentage of inverse humidity exists in the atmospheric profile corresponding to cirrus cloud fields of view over landThe assimilation of cirrus cloud pixels greatly improves the utilization rateAssimilating advanced geostationary radiance imager cirrus‐effected radiances has a neutral to positive effect on water vapor analysis and precipitation forecasting [ABSTRACT FROM AUTHOR]

Scafetta (2022, https://doi.org/10.1029/2022gl097716) purports to test Coupled Model Intercomparison Project Phase 6 (CMIP6) climate models through a comparison of temperature changes over three decades. Unfortunately, the paper contains numerous conceptual and statistical errors that undermine all of the conclusions. First, no uncertainty is given for the observational temperature difference, making it impossible to assess compatibility with any model result. Second, the CMIP6 data are the ensemble means for each model, but the metric being tested is sensitive to the internal variability and so the full ensemble for each model must be used. When this is corrected, the conclusion that "all models with ECS > 3.0°C overestimate the observed global surface warming" is not sustained. Third, the statistical test in Section 2 would reject all models even in a perfect model setup given sufficient ensemble members, thus the second conclusion "that spatial t‐statistics rejects the data‐model agreement" is also not sustainable. Plain Language Summary: Comparisons of models and observations need to account from multiple sources of uncertainty in both the observations and due to the chaotic dynamics of the weather. The analyses in Scafetta (2022, https://doi.org/10.1029/2022gl097716) do not take either of these issues into account and thus the conclusions in that paper are not supportable. Key Points: Scafetta (2022) contains errors in both of the statistical tests used that make the conclusions unsupportable [ABSTRACT FROM AUTHOR]

On 7 January 2014, a solar storm erupted, which eventually compressed the Earth's magnetosphere leading to the generation of chorus waves. These waves enhanced local wave‐particle interactions and led to the precipitation of electrons from 10 s eV to 100 s keV. This paper shows observations of a low energy cutoff in the precipitation spectrum from Van Allen Probe B Helium Oxygen Proton Electron measurements. This low energy cutoff is well replicated by the predicted loss calculated from pitch angle diffusion coefficients from wave and plasma observations on Probe B. To our knowledge, this is the first time a single spacecraft has been used to demonstrate an accurate theoretical prediction for chorus wave‐induced precipitation and its low energy cutoff. The specific properties of the precipitating soft electron spectrum have implications for ionospheric activity, with the lowest energies mainly contributing to thermospheric and ionospheric upwelling, which influences satellite drag and ionospheric outflow. Plain Language Summary: On 7 January 2014, a large storm erupted from the Sun. This storm encountered the Earth and compressed the magnetosphere a few days later. The compression of the magnetosphere led to the creation of chorus waves, a wave‐type known to interact only with electrons with specific energies. In this case, the waves interacted with electrons in the magnetosphere's outer radiation belt. They caused the loss of electrons from 10 s eV to 100 s keV into the ionosphere and upper atmosphere. This paper uses theory to determine which energies we expect will interact with the observed chorus wave. We use the Helium Oxygen Proton Electron instrument from the Van Allen Probes to see if our predictions are correct. We care about these processes because the loss of these electrons can affect ionospheric activity. Key Points: Upper band chorus waves can have a minimum resonant energy in the 10 s eV energy rangeChanges in the minimum resonant energy can change the cut off for what lower energy particles will be lostThe lower energy cut off can be observed in the Van Allen Probes Helium Oxygen Proton Electron data [ABSTRACT FROM AUTHOR]

Earthquake swarms are most commonly composed of small‐magnitude earthquakes. However, a recent study by Yoshida, Uchida, et al. (2023, https://doi.org/10.1029/2023GL106023) analyzed a swarm beneath the Noto Peninsula in Japan that, after more than two years of moderate‐magnitude seismicity, triggered the moment magnitude (Mw) 6.2 Suzu mainshock in May 2023. Based on high‐precision earthquake locations and a slip inversion of the mainshock, these authors found that the Mw 6.2 Suzu earthquake occurred on the updip extension of a fault that was active during the swarm, likely driven by increased fluid pressure. After publication of that paper, a much larger and more destructive Mw 7.5 event occurred nearby on 1 January 2024. These events underscore the potential for swarms to be precursors to large, damaging earthquakes. Forecasting the eventual evolution of swarms is currently very challenging but could be aided in the future by new observations and models. Plain Language Summary: Although earthquake swarms often only contain small earthquakes, occasionally they can trigger large, damaging earthquakes. Yoshida, Uchida, et al. (2023, https://doi.org/10.1029/2023GL106023) examined the triggering of a magnitude 6.2 earthquake in Japan, which caused extensive damage, following two years of smaller earthquakes. This sequence, like many swarms, may have been driven by elevated fluid pressure migrating upwards within the crust. After publication of that paper, a much larger and more destructive Mw 7.5 event occurred nearby. Forecasting the eventual evolution of ongoing swarms is currently very challenging but could be aided in the future by new observations and models. Key Points: Earthquake swarms can be precursors to damaging earthquakes, including the 1 January 2024, Mw 7.5 Noto Peninsula, Japan eventFluid pressure changes often drive swarm activity, and their degree of confinement may influence swarm evolutionDirect observations of fluids in fault zones combined with numerical modeling may aid swarm forecasting in the future [ABSTRACT FROM AUTHOR]

Coral reef islands are amongst the most vulnerable environments to sea‐level rise (SLR). Recent physical and numerical modeling studies have demonstrated that overwash processes may enable reef islands to keep up with SLR through island accretion. Sediment supply to these islands from the surrounding reef system is critical in understanding their morphodynamic adjustments, but is poorly constrained due to insufficient knowledge about sediment delivery rates. This paper provides the first estimation of sediment delivery rates to coral reef islands. Analysis of topographic and geochronological data from 28 coral reef islands indicates an average rate of sediment delivery of c. 0.1 m3 m−1 yr−1, but with substantial inter‐island variability. Comparison with carbonate sediment production rates from census‐based studies suggests that this represents one quarter of the amount of sediment produced on the reef platform. Results of this study are useful in future modeling studies for predicting morphodynamic adjustments of coral reef islands to SLR. Plain Language Summary: Low‐lying coral reef islands are under threat of sea‐level rise (SLR). However, when these islands are flooded, ocean waves can bring in sediment that can increase the island elevation. This would enable coral reef islands to better withstand flooding in the future. Knowing how much sediment is brought in will help in our understanding of future changes to these islands due to SLR. In this paper, we use data from 28 Indo‐Pacific coral reef islands to compute sediment supply to the islands. We find that on average 0.1 m3 of sediment (roughly 100 kg) is delivered each year for every meter of island shoreline. We further suggest that this implies that only one quarter of the sediments produced by the coral reef system is delivered to the island shoreline. Most of the sediment produced remains on the reef flat or is exported to the ocean or the lagoon. Our results will help future studies to predict more accurately how coral reef islands will adjust to SLR. Key Points: We provide the first estimates of carbonate sediment delivery rates to 28 coral reef islands using all data available from the literatureSediment delivery to the reef islands occurs at a rate of c. 0.1 m3 m−1 yr−1, but with substantial inter‐island variabilityWhere island building has been continuous through island history, long‐term delivery rates provide valuable estimates for contemporary rates [ABSTRACT FROM AUTHOR]

We examine the low‐frequency (LF) magnetic pulses recorded for the positive leader in two natural lightning flashes as recorded on the high‐speed video camera. The captured positive leader in both cases propagated in a stepwise manner at least over several milliseconds according to the concurrent sequence of LF magnetic pulses. By comparing with previous studies on positive leaders under different situations, the average inter‐pulse intervals (11.7 and 20.3 μs, respectively) obtained for our natural cases are shorter than that of upward positive leaders in rocket‐triggered (typically >25 μs) and tower‐initiated lightning (62 μs in one case). Hence, the stepwise propagation of positive leaders in natural lightning is likely more frequent than that in object‐induced lightning, reflecting a possible influence of ambient electric field and other meteorological factors on the stepwise feature of positive leader. The stepwise extension might be common for positive leaders developing in various scenarios. Plain Language Summary: Many observations have been made with respect to upward positive leaders in rocket‐triggered lightning and tower‐initiated lightning. From the previous observations, it is obvious that the upward positive leader sometimes propagates in a stepwise manner. When it comes to natural lightning, many reliable conjectures have been put forward about the stepwise propagation of positive leaders, but there is still a lack of solid observations. Whether the positive leader in natural lightning also propagates in a stepwise manner remains an open question. In this paper, we analyze the propagation of positive leaders in two natural lightning flashes using high‐speed imaging and concurrent measurements of the associated radio frequency magnetic fields. It aims to understand the variability in the propagation manner of positive leaders in natural lightning and revealing the differences and similarities of leader propagation between natural and object‐initiated lightning. From the low‐frequency magnetic field measurements, the positive leaders in natural lightning could also propagate in a stepwise manner. Our analysis shows that the inter‐pulse intervals of positive leaders in observed natural lightning are shorter than that previously observed in tower‐initiated and rocket‐triggered lightning. Key Points: First coordinated observations of stepwise propagation for the positive leader of natural lightning flashesThe average inter‐pulse interval of positive leader stepping in two cases is estimated to be around 12 and 20 μs, respectivelyThe stepping of positive leaders in natural lightning appears to be more frequent than that of the object‐initiated upward positive leaders [ABSTRACT FROM AUTHOR]

Previous studies suggested that Atlantic Multidecadal Variability (AMV) modulations on pan‐Pacific sea surface temperature (SST) variability and prediction are model‐dependent. These results were mainly based on SST forcing experiments in which AMV‐related Atlantic SST anomalies were prescribed. However, the AMV itself is also model‐dependent, but its influences on the Pacific remain unclear. Here, we use multi‐model fully coupled experiments from the Coupled Model Intercomparison Project Phase 6 (CMIP6), along with observations, to study the model‐dependent AMV trans‐basin effects. We found that AMV strength is a key factor: Stronger (Weaker) model AMV than observations overestimates (underestimates) SST response and decadal prediction skills, mainly in the North Pacific. The reason is that stronger positive phased AMV, for example, leads to higher sea level pressure anomalies over the North Pacific, which lifts sea surface height and deepens thermocline to warm SST. Our study highlights the necessity to improve simulations of AMV strength. Plain Language Summary: Pacific sea surface temperature (SST) decadal variability and prediction are important for economy and environment. The Atlantic Multidecadal Variability (AMV) was thought to significantly influence Pacific SST variability and prediction. However, the results of previous studies were model‐dependent. In this paper, we use fully coupled experiments of the Coupled Model Intercomparison Project Phase 6 (CMIP6) models to study what contributes to the model dependency. We found that the strength of the AMV is a key factor influencing AMV trans‐basin modulations on SST variability and decadal prediction, mainly in the North Pacific Ocean. The related mechanisms are discussed. Our paper sheds light on the way to improve North Pacific SST decadal prediction. Key Points: Climate models show a strong inter‐model spread of Atlantic Multidecadal Variability (AMV) strengthModels with stronger (weaker) AMV than observations overestimate (underestimate) North Pacific sea surface temperature (SST) response and decadal predictionThe North Pacific SST response is primarily forced by AMV‐induced wind stress curl and ocean dynamics [ABSTRACT FROM AUTHOR]

Sea surface temperatures (SSTs) vary not only due to heat exchange across the air‐sea interface but also due to changes in effective heat capacity as primarily determined by mixed layer depth (MLD). Here, we investigate seasonal and regional characteristics of the contribution of MLD anomalies to the month‐to‐month variability of SST using observational datasets. First, we propose a metric called Flux Divergence Angle, which can quantify the relative contributions of surface heat fluxes and MLD anomalies to SST variability. Using this metric, we find that MLD anomalies tend to amplify SST anomalies in the extra‐tropics, especially in the eastern ocean basins, during spring and summer. In contrast, MLD anomalies tend to suppress SST anomalies in the eastern tropical Pacific during December‐January‐February. This paper provides the first global picture of the observed importance of MLD anomalies to the local SST variability. Plain Language Summary: Sea surface temperature (SST) is one of the important indicators as well as drivers of climate variability over the globe. SST varies not only due to changes in surface heat fluxes but also due to changes in effective heat capacity as mainly determined by mixed layer depth (MLD). However, the observed characteristics of the latter process associated with the MLD anomalies are limited. In this study, we propose a new metric called "Flux Divergence Angle (FDA)," which can quantify the relative importance of MLD and surface heat flux to the SST variability. Using this metric, we find that the MLD anomalies tend to amplify the local SST variability in the extra‐tropics during spring and summer. On the other hand, MLD anomalies tend to suppress the SST variability in the eastern tropical Pacific during December‐January‐February. This paper provides, for the first time, the global picture of relative importance of MLD anomalies to the SST variability based on observations. Key Points: Relative contributions of mixed layer depth (MLD) and surface heat flux anomalies to sea surface temperature (SST) variability are investigated using the Flux Divergence Angle metricMLD anomalies tend to amplify SST anomalies in the extra‐tropics, especially in eastern part of ocean basin, during the spring and summerMLD anomalies tend to suppress SST anomalies in the eastern tropical Pacific during December‐January‐February [ABSTRACT FROM AUTHOR]

This study addresses a critical gap in understanding anthropogenic influences on tropical climate dynamics by investigating the impact of aerosol‐cloud interactions on large‐scale circulation. Despite extensive research on greenhouse gas‐induced warming and its effects on tropical circulation, the impact of aerosols, particularly their interactions with clouds, on large‐scale circulation remains understudied. Utilizing large‐domain radiative convective equilibrium cloud‐resolving simulations, this research demonstrates that increasing aerosol concentration intensifies tropical overturning circulation, evaluated at the mid‐troposphere (I) $(\mathcal{I})$, strongly correlating with domain mean cloud and radiative properties. Employing a weak temperature gradient approximation, I attribute variations in I $\mathcal{I}$ to changes in clear‐sky radiative cooling rather than stability. These radiative cooling changes are linked to humidity changes driven by warm rain suppression by aerosols. This study's findings underscore the need to take into account microphysical changes, particularly aerosol concentrations, when studying anthropogenic effects on tropical circulation. Plain Language Summary: Clouds intricately couple with the large‐scale overturning circulation in the tropics. Aerosols, small particles suspended in the atmosphere, interact with clouds. Thus, changes in aerosols concentration (Na) have the potential to affect cloud properties and by that the large‐scale circulation, with important implications for tropical climate and climate change. Despite this crucial relationship, the subject has been insufficiently explored. In this paper, I use a simplified, yet realistic, representation of the tropical atmosphere—radiative convective equilibrium large‐domain cloud‐resolving simulations—to investigate the effect of aerosol‐cloud interaction on overturning tropical circulation. By varying Na under diverse sea surface temperatures, I demonstrate that the strength of the overturning circulation intensifies with increasing Na. Utilizing a semi‐analytical expression for subsidence strength in clear‐sky tropical regions, I show that the intensified overturning circulation with increased Na can be attributed to heightened humidity in the mid‐troposphere, leading to intense radiative cooling. This mid‐tropospheric humidification can be explained by warm rain suppression by aerosols, which fosters stronger humidity mixing between clouds and their surroundings. These findings underscore the need to consider aerosol concentration changes when examining anthropogenic impacts on tropical circulation. Key Points: The overturning tropical circulation intensifies with aerosol concentration in a radiative convective equilibrium modelChanges in circulation strength can be explained by changes in diabatic subsidence driven by radiative changesRadiative changes can be explained by increased humidity at the mid‐troposphere due to warm rain suppression [ABSTRACT FROM AUTHOR]