Search

PURPOSE Using Scheimpflug tomography to investigate the difference in corneal power and corneal astigmatism between 3- and 4-mm diameter zones centered on the pupil and corneal apex. METHODS A total of 90 eyes were included in this study. Axial keratometry, total refractive power, and true net power centered on the pupil and corneal apex in 3- and 4-mm diameter zones were assessed. The paired sample t test and independent sample t test were used for data comparison. RESULTS For corneal power and corneal astigmatism for the 3- and 4-mm diameter zones, the flat K values of axial keratometry, total refractive power, and true net power centered on the pupil (3-mm: 43.99 ± 1.69 D, 43.12 ± 1.71 D, 42.53 ± 1.67 D; 4-mm: 44.04 ± 1.67 D, 43.38 ± 1.71 D, 42.61 ± 1.65 D) were significantly higher than those centered on the apex (3-mm: 43.93 ± 1.69 D, 43.05 ± 1.71 D, 42.46 ± 1.67 D; 4-mm: 44.01 ± 1.67 D, 43.34 ± 1.69 D, 42.58 ± 1.65 D; all P < 0.02). However, the steep K and astigmatism magnitude values centered on the pupil (3-mm: 45.71 ± 1.73 D, 45.01 ± 1.73 D, 44.38 ± 1.69 D; 1.72 ± 0.83 D, 1.89 ± 0.86 D, 1.85 ± 0.84 D; 4-mm: 45.78 ± 1.73 D, 45.28 ± 1.74 D, 44.45 ± 1.68 D; 1.73 ± 0.84 D, 1.90 ± 0.85 D, 1.84 ± 0.85 D) were lower than those centered on the apex (3-mm: 45.81 ± 1.74 D, 45.10 ± 1.72 D, 44.50 ± 1.70 D; 1.88 ± 0.90 D, 2.05 ± 0.90 D, 2.04 ± 0.90 D; 4-mm: 45.85 ± 1.73 D, 45.34 ± 1.73 D, 44.51 ± 1.69 D; 1.83 ± 0.88 D, 2.00 ± 0.90 D, 1.93 ± 0.86 D; all P < 0.01). Compared with the 3-mm diameter zone, the corresponding 4-mm diameter zone showed higher corneal power centered on both pupil and corneal apex. CONCLUSIONS The difference in corneal power and corneal astigmatism, measured at 3 and 4 mm, centered on the pupil and the corneal apex should be noted in corneal refractive surgery and toric intraocular lens calculation.

PURPOSE The goals of this laboratory study were to evaluate the interface quality in laser-assisted lamellar anterior keratoplasty (LALAK) with microkeratome-cut grafts and achieve good graft-host apposition. METHODS Simulated LALAK surgeries were performed on 6 pairs of eye-bank corneoscleral discs. Anterior lamellar grafts were precut with microkeratomes. Deep femtosecond (FS) laser cuts were performed on host corneas followed by excimer laser smoothing. Different parameters of FS laser cuts and excimer laser smoothing were tested. Optical coherence tomography was used to measure corneal pachymetry and evaluate graft-host apposition. The interface quality was quantified in a masked fashion using a 5-point scale based on scanning electron microscopy images. RESULTS Deep FS laser cuts at 226 to 380 μm resulted in visible ridges on the host bed. Excimer laser smoothing with a central ablation depth of 29 μm and saline as a smoothing agent did not adequately reduce ridges (score = 4.0). Deeper excimer laser ablation of 58 μm and Optisol-GS as a smoothing agent smoothed ridges to an acceptable level (score = 2.1). Same sizing of the graft and host cut diameters with an approximately 50-μm deeper host side cut relative to the central graft thickness provided the best graft-host fit. CONCLUSIONS Deep excimer laser ablation with a viscous smoothing agent was needed to remove ridges after deep FS lamellar cuts. The host side cut should be deep enough to accommodate thicker graft peripheral thickness compared with the center. This LALAK design provides smooth lamellar interfaces, moderately thick grafts, and good graft-host fits.

PURPOSE To evaluate the Descemet stripping automated endothelial keratoplasty (DSAEK) graft deturgescence in preservation medium after microkeratome cut using Fourier domain optical coherence tomography. METHODS The central and peripheral thickness of DSAEK grafts was measured by Fourier domain optical coherence tomography immediately after microkeratome cuts and 1, 2, 3, and 4 hours afterward. All measurements were taken when the grafts were stored in 4°C preservation medium. The hourly change in central graft thickness and graft shape (peripheral graft thicknes - central graft thickness) was calculated and tracked over time. RESULTS Five DSAEK grafts were measured. The average central graft thickness was 188.7 ± 44.4 μm (range, 146-255 µm) immediately after microkeratome cuts. The average central graft thickness was 147.5 ± 33.0 μm (range, 116-190 µm) after 4 hours in preservation medium (P < 0.001). The average hourly change in central graft thickness was -30.5 μm (P = 0.0051), -8.6 μm (P = 0.055), -2.0 μm (P = 0.42), and 0.0 μm (P = 0.93) at 1, 2, 3, and 4 hours, respectively, after microkeratome cuts. The average hourly change in graft shape was insignificant. CONCLUSIONS DSAEK grafts become thinner after microkeratome cut and stabilize at approximately 2 hours. Therefore, DSAEK graft thickness should be measured at 1.5 to 3 hours after microkeratome cut.

To use beveled femtosecond laser astigmatic keratotomy (FLAK) incisions to treat high astigmatism after penetrating keratoplasty.Paired FLAK incisions at a bevel angle of 135 degrees, 65% to 75% depth, and arc lengths of 60 to 90 degrees were performed using a femtosecond laser. One case of perpendicular FLAK was presented for comparison. Vector analysis was used to calculate the changes in astigmatism. Fourier domain optical coherence tomography was used to examine incision morphology.Wound gaping requiring suturing was observed in the case of perpendicular FLAK. Six consecutive cases of beveled FLAK were analyzed. Fourier domain optical coherence tomography showed that beveled FLAK caused a mean forward shift of Bowman layer anterior to the incisions of 126 ± 38 μm, with no wound gaping. The mean magnitude of preoperative keratometric astigmatism was 9.8 ± 2.9 diopters (D), and postoperatively it was 4.5 ± 3.2 D (P0.05). Uncorrected visual acuity improved from 1.24 ± 0.13 logarithm of the minimum angle of resolution preoperatively to 0.76 ± 0.38 postoperatively (P0.05). Best spectacle-corrected visual acuity improved from 0.43 ± 0.33 logarithm of the minimum angle of resolution preoperatively to 0.27 ± 0.24 postoperatively (P = 0.22). Visual results were reduced in 2 patients by cataract progression. Between 1 and 3 months after beveled FLAK, the keratometric cylinder was stable (1 D change) in 5 of 6 patients, and regressed in 1 patient. No complications occurred.Beveled FLAK incisions at varied depth are effective in the management of postkeratoplasty astigmatism. Early postoperative changes stabilized within 1 month in most patients. Further studies are needed to assess long-term outcomes.

To evaluate optical coherence tomography (OCT) in the measurement of donor corneas in preparation for endothelial keratoplasty.Donor corneas were imaged by OCT while immersed in preservation medium. Central corneal thickness (CCT) was measured by OCT from the Bowman layer to the endothelium. The corneas were then mounted on an artificial anterior chamber, and the epithelium was removed. Ultrasound pachymetry (USP) was used to measure CCT just before sectioning with a microkeratome. The central graft thickness (CGT) was measured by USP. The graft was then returned to the medium and imaged by OCT.The study included 154 donor corneas. The average CCT measured by OCT (550 ± 63 μm) was thicker (P0.001) than that measured by USP (507 ± 54 μm). Similarly, the CGT measured by OCT (158 ± 41 μm) was thicker (P = 0.0005) than that measured by USP (153 ± 38 μm). The predictability of cut depth, as assessed by pooled standard deviation (SD), was better (P = 0.023) for USP (41 μm) compared with OCT (48 μm). The graft was thicker (P0.001) peripherally than centrally in OCT images. The predictability of cut depth by OCT was better (P0.001) for corneas thinner than 600 μm (SD = 45.6 μm) compared with those thicker than 600 μm (SD = 86.9 μm).The donor corneal measurements by OCT were not as predictable as those by USP. The predictability of graft thickness, however, could be optimized using OCT to select for corneas thinner than 600 μm and then using immediate precut USP to set the microkeratome depth. A graft thickness profile measured by OCT could be useful to the surgeon.

To measure the wound geometry after femtosecond laser-enabled keratoplasty (FLEK) using optical coherence tomography (OCT).Prospective nonrandomized clinical study and laboratory study.Patients who were candidates for penetrating keratoplasty at an academic referral center.Wound architecture was measured and analyzed by OCT in 8 eyes of 8 consecutive patients who underwent FLEK. Femtosecond laser lamellar cuts were performed on 3 eye bank corneas, and the wound diameters were measured by OCT.Sutures were completely removed on average at 1 month per decade of age after surgery. No cases of wound dehiscence were noted, and graft-host tissue apposition appeared excellent on OCT. The mean spectacle-corrected visual acuity 1 month after suture removal was 20/35, and mean astigmatism was 5.0 diopters by manifest refraction and 8.7 diopters by computerized topography. The measured graft diameter was smaller than the laser setting by 2.5% (P = 0.007). The cut diameters of the eye bank corneas were also slightly smaller than the laser setting.FLEK offers benefits of rapid wound healing and predictable wound geometry. The measured wound geometry agreed well with laser setting other than a small systematic deviation that could be explained by the mechanics of corneal applanation during the laser cut. OCT is a useful tool to measure the actual graft diameter after FLEK.

PURPOSE To use optical coherence tomography (OCT) to detect previous refractive surgery in donor corneas. METHODS We constructed a tabletop OCT scanner operating at 1310-nm wavelength. Donor corneas at the Cleveland Eye Bank were scanned while sealed within the sterile container immersed in Optisol GS. OCT scanning was performed with 7.6-mm-long lines (512 axial scans) along 8 meridians. Anterior and posterior corneal surfaces were automatically mapped using image processing software that we developed. Curvature was computed from the best parabolic fit in the central 5-mm diameter. Layered analysis of the stromal reflectivity was also performed. Twenty-nine corneas from 19 donors were examined. Five had a history of laser in situ keratomileusis (LASIK). RESULTS The flap interfaces could not be visualized on slit-lamp or OCT images but were confirmed by histology. The death-to-scan time was 22.1 +/- 11.4 (SD) hours for normal corneas and 100.6 +/- 57.5 hours for LASIK corneas. The anterior surface power was 67.5 +/- 2.5 D in control corneas and 64.5 +/- 2.4 D in LASIK corneas (P = 0.023). There was no significance between the 2 groups in terms of posterior curvature and thickness parameters. The anterior/posterior reflectivity ratio in the central 4-mm diameter was significantly lower in post-LASIK corneas than in control (P < 0.05). CONCLUSIONS OCT provides thickness, topography, and reflectivity maps of donor corneas without taking them out of preservation medium and container. The anterior curvature and the anterior/posterior stromal reflectivity ratio may be useful for detecting previous LASIK.