Search

• Hillslope erosion dynamic model integrating vegetation effect was established. • Unified baseline parameters were obtained across different land uses. • Effect of vegetation on soil detachment and sediment transport was revealed. • Contribution rates of vegetation to sediment reduction along slopes were quantified. Developing a process-based soil erosion model that comprehensively considers the effects of vegetation is complex but crucial for evaluating sediment reduction during vegetation restoration. Current understanding of the effect of vegetation on sediment reduction along hillslopes across different land uses is limited. In this paper, we developed a dynamic model of hillslope erosion that integrates the effects of vegetation on soil detachability and hydrodynamics (VED) based on the feedback mechanism between soil detachment and sediment transport. The VED was calibrated and validated with runoff plot data for woodland, grassland, and farmland in the Wuding, Yan, Jing and Wei Rivers of the Loess Plateau in China. Unified baseline parameters and decay coefficients of vegetation were obtained. The model validation results indicated that the coefficient of determination, Nash–Sutcliffe simulation efficiency and relative error ranged from 0.59 to 0.99, 0.56 to 0.90, and −45.99 % to 46.36 %, respectively. The decay coefficients for soil detachment capacity (Φ), sediment transport capacity (T c), and the sediment reduction effect of vegetation exhibited the following order: woodland > grassland > farmland. Compared with VED, existing process-based soil erosion models failed to effectively characterize the influence of vegetation on Φ and T c on the Loess Plateau, with differences of several orders of magnitude. The individual contributions of runoff, soil detachability, and hydrodynamics with vegetation impact on sediment yield were quantified by VED. The contribution rates of vegetation to sediment reduction decreased gradually with increasing slope length because the soil detachment capacity of bare slopes exceeded that of vegetated slopes, resulting in a faster increase in sediment yield. The contribution rates of vegetation to sediment reduction for woodland, grassland, and farmland with 20 %–60 % vegetation covers were 66.75 %–99.95 %, 57.43 %–99.63 %, and 27.91 %–88.63 % in the boundary conditions of this study, respectively. The results reveal the potential for integrating VED into other distributed watershed hydrological and sediment models to assess the effects of vegetation restoration on sediment reduction at a watershed scale. [ABSTRACT FROM AUTHOR]

• SY and Sr of the SL was the largest, but the sediment MWD was the smallest. • Change in the flow discharge did not affect the distribution pattern of sediment particles. • Dynamic coupling of runoff hydraulics and EG morphology drove soil loss. • SDR was the most direct influencing factor on the Sr in EGs. Ephemeral gully (EG) erosion represents the early stage of large-scale gully (locally named as "Benggang") development on Ultisols in the granite hilly area. However, the EG erosion process and the mechanism underlying sediment production have not been fully elucidated. In this study, a series of field scouring experiments were conducted under different flow discharge levels (10, 15, 20, 25, and 30 L·min−1), and the primary EGs in three typical soil layers with different weathering degrees (red soil layer (RL), transition layer (TL), and sandy layer (SL)) was dynamically monitored. The results indicated that the ratio of width to depth of the EGs rapidly decreased as the flow discharge increased. At 30 L·min−1, the average sediment yield and transport rate (Sr) of the SL were 4.85 and 5.39 times, greater than those of the RL, respectively. The sediment particles were concentrated within the 1–2 mm particle size range, accounting for over 35 %. In addition, the mean weight diameter of the sediment particles in the RL was the largest. The sediment distribution characteristics did not respond to flow changes but were affected by EG morphological changes. With increasing flow discharge, the flow shear stress and stream power increased. Further analysis revealed that the coupling effect of flow hydraulic characteristics and EG morphological evolution drove the EG erosion sediment production process, and the Sr of the SL was highly sensitive to flow discharge changes. The soil disintegration rate was an internal factor that directly affected soil loss in the EGs, with a path coefficient of 0.71. The bulk density, organic matter content, and sand content were all indirect influencing factors. The RL exhibited greater anti-erodibility than the other layers and could serve as an effective protective layer for granite hilly areas. These findings provide a theoretical basis for improving soil loss management systems. [ABSTRACT FROM AUTHOR]

• Mass movement is an important erosion mode and sediment source in gully network. • Mass movement increased sediment concentration and led to peak sediment concentration. • Mass movement was prone to be triggered by rainfall with a medium-duration and moderate-intensity. • Rainfall amount and slope gradiet determined the trigger and total volume of mass movement. Mass movement erosion on the gully sidewalls is recognized as an important erosion mode and sediment source in hilly and gully watersheds. However, the trigger of mass movement erosion and transport of gravity-detached material remain poorly understood. A series of rainfall simulation experiments were conducted on six loess gully sidewall models, with a height (1 m), three rainfall (60 mm, 48 mm and 24 mm) and two slope gradients (70° and 80°), to quantitatively explore the sensitivity factor and transport mechanisms of mass movement. Results revealed that the accumulation volume and initiation of the mass failure were significantly influenced by rainfall amount. The accumulative volume of failure events was observed to increase in a linear pattern with increasing rainfall amount. The minimum cumulative rainfalls for the initiation of mass failure on the loess gully sidewalls were approximately 43.6, 28.2 and 65.6 mm for short-duration and high-intensity, medium-duration and moderate-intensity and short-duration and moderate-intensity rainfalls, respectively. This implied that the initiation of mass failure was more prone to rainfall events with a medium-duration and moderate-intensity than those with a high intensity and short duration. Rainfall amount and initial slope gradient were the most sensitive elements driving the number and volume of the mass movement erosion. Mass movement erosion raised sediment concentration, but the eroded material was unable to be transported by runoff in a timely manner. Average sediment concentrations at the model outlet increased by 1.9–11.9 times following the occurrence of mass failures compared to those before. A low instantaneous sediment delivery ratio of 0.032 for the mass movement erosion. The experimental findings help comprehend the influence of mass movement erosion on sediment supply on the gully sidewall in the hilly and gully network, i.e. the Loess Plateau. [ABSTRACT FROM AUTHOR]

• Effective sediment sizes were determined along a gradient of soil structural stability. • Sediment average size exhibited a unimodal variation with soil structural stability. • Suspension-saltation dominated sediment transport for low and high stable soils. • Suspension-saltation and rolling jointly dominated erosion for medium stable soils. • Soil structural stability determined rainfall intensity effect on sediment transport. Sediment transport patterns (suspension, saltation and rolling) not only depend on flow hydrodynamic characteristics, but also on sediment properties, both of which are largely influenced by soil structural stability. However, how sediment sizes and transport patterns response to original soils over a wide range of structural stability remains unclear. Herein, field plot rainfall simulation experiments on five soils along an increased gradient of structural stability were conducted at two rainfall intensities of 45 and 90 mm h−1 to investigate effective sediment size characteristics and associated transport patterns in sheet erosion. Differing from runoff and sediment yield, sediment sizes were most influenced by soil structural stability (F = 386.9) rather than rainfall intensity (F = 246.7, p < 0.001). Mean weight diameter of sediment (0.16–0.84 mm) and the proportion of coarse particles (>0.25 mm) exhibited a unimodal variation with increased soil structural stability. The effective sediment size distribution shifted from unimodal with the peak at < 0.10 mm for low and high stable soils to bimodal with two peaks at < 0.10 mm and 0.5–1 mm for medium stable soils. Correspondingly, suspension-saltation (>74 %) dominated sediment transport for low and high stable soils, which was determined by fine sized fragments from aggregate breakdown and small flow transport capacity, respectively; while both suspension-saltation (<0.10 mm) and rolling (>0.25 mm) jointly contributed to sediment transport for medium stable soils, which was controlled by the interaction between fragment size and flow transport capacity. Moreover, the positive effect of rainfall intensity on sediment sizes was more remarkable for the medium than for the low and high stable soils. A conceptual model of sediment transport mechanisms in response to soil structural stability is firstly proposed, which merits consideration in the future development of erosion modeling and soil conservation techniques. [ABSTRACT FROM AUTHOR]

• Demonstration of rise and fall of carbon discharge with time. • Demonstration of enrichment of sand in loose layer above soil. • Demonstration of no carbon enrichment is sediment at the steady state. Soil carbon losses from sheet and interrill erosion areas have an impact on the global carbon cycle. Sediment discharged in many experiments where artificial rainfall has been applied to sloping soil surfaces show greater proportions of carbon in the sediment than found in the cohesive soil source. In many cases, conclusions drawn from these experiments fail to recognise that the enrichment of carbon in the sediment discharge is a result of unsteady conditions that occur before the steady state develops. It is known that particles of sand of different sizes move at different rates when raindrop induced salation occurs with the result that initially the particle size distribution is finer than the source but tends towards that of the source as time progresses. The presence of carbon in aggregates influences the density of aggregates. Here a qualitative model of sediment transport of sand and coal particles by raindrop induced saltation is used to demonstrate time varying enrichment of coal resulting from the effect of carbon on particle settling velocity. The model also demonstrates how the layer of loose particles that develops on top of the cohesive soil surface influences the relative amounts of carbon and sand in the sediment discharges. The steady state is not achieved until the slowest moving particle detached at the farthest distance from the downslope boundary is discharged. That may not be achieved in many of the experiments reported in the literature. [ABSTRACT FROM AUTHOR]

[Display omitted] • Temporal evolution of fine sediment deposits on a gravel bar during a two-year period. • Simple physical-based models introduced to better understand fine sediment dynamics. • Flow-related events can yield thick deposits or erosion depending on the discharge-concentration time-series. • Strong wind-related events disperse fine sediments and yield erosion. • Limitation of the image-analysis due to the seasonal variability of the image quality. In this study, the temporal evolution of fine sediment deposits on a gravel bar is analysed during a two-year period. The time-series of fine deposit surface area is obtained using the methodology proposed in Part 1 of this work. By combining the hydro-meteorological data, the main evolutions of the fine deposits observed on the bar surface are found to be triggered by events such as natural floods, dam flushes, and strong wind valley breezes, and are quantified for each of these events. A simple processed-based flow model is proposed to investigate the sediment dynamics during the flood events, which balances the erosional/depositional processes of fine sediments. Variability in the fine deposit evolution after floods is mainly due to the different flow and sediment concentration conditions. For small events for which the gravel bar is not totally submerged, a slight erosion generally occurs. For larger events for which the gravel bar is totally submerged, a large net deposition is often observed. The fine deposit surface area time-series also shows sharp decreases of the surface deposit coverage after some strong valley breeze events, with an evolution of the same order of magnitude than floods. The application of a wind transport model shows that strong wind valley breezes can transport fine particles from the bar surface to the river channel, thus leading to a loss of fine deposits on the bar surface. Also, the deposit initial moisture is a crucial element having impact on the fine sediment transport on the bar surface. Dry deposits are much more likely to be transported than wet deposits. A discussion is also provided on the potential impact of wind and vegetation on the long-term dynamics of fine sediment deposits. [ABSTRACT FROM AUTHOR]

• Mudstone deposits behave like noncohesive sediments in terms of erosion resistance. • High erosion resistance of laterites cannot be predicted merely by particle size. • Shields' parameter predicted by water content, clay content, and plasticity index. Soil erosion and sedimentation are major factors in landscape evolution and river morphology. The erosion resistance of sediments plays an important role in landscape evolution processes because it determines the threshold of an acting force at the initiative sediment motion, and the amount of sediment transports. This study examined the sediment properties and their correlations to the erosion resistance of mudstone deposits and laterites, which are two representative natural cohesive soils in hill and terrace topography in Taiwan. Soil physical properties and pore water chemical properties, and the erosion resistance were investigated and determined using laboratory tests and hydraulic flume experiments, respectively. Investigations of sediment properties showed that the mudstone deposits and laterites had significant differences in median particle size, soil texture, level of plasticity, internal structure, and pH value and electrical conductivity of their aqueous slurry. Results from the hydraulic flume experiments showed that the laterites had stronger erosion resistance, indicating by larger values of critical shear stress and the Shields' parameter, than the mudstone deposits. Through the stepwise multiple regression analysis, a quantitative equation was proposed to estimate the Shields' parameter using fine sediment properties including water content, clay content, and the plasticity index expressed in decimal fractions, of the two soils. Despite more experiments of the two natural soils with different ranges of the sediment properties are needed to validate the empirical equation for predicting the Shields' parameter, the proposed methodology provides an essential reference in which erosion resistance is an important parameter. [ABSTRACT FROM AUTHOR]

[Display omitted] • Coherent dataset on specific sediment yield for 30-year' period (1990–2019) • Strong variation in sediment yield along the Peruvian western Andes. • River discharge and river channel steepness explain 55% of the variance in sediment yield. • Spurious correlation between land cover, river discharge and topography. • Empirical data on sediment yield during extreme events are needed. The tropical Andes has been less studied in terms of erosion processes in comparison to other major mountain ranges in the world. Environmental gradients are steepest along the western flank of the Andes that is characterized by marked differences in vegetation, rough topography with deeply incised canyons, and highly variable and extreme precipitation patterns. Previous efforts mostly focused on sediment fluxes in large rivers draining to e.g. the Amazon basin while small to medium-sized rivers such as the ones flowing towards the Pacific Ocean have been relegated. They highlighted the link between sediment yield, anthropogenic and natural factors, e.g. climate, topography, river runoff, lithology and vegetation cover. In this study, we identified the spatial patterns of specific sediment yield along the western slopes of the Peruvian Andes between 3° and 13° S latitude for 21 catchments. We collected and analysed data from 22 environmental factors to elucidate their importance on spatially varying sediment yield. The sediment load was derived from gauging stations, reservoir sedimentation and water turbidity over a 30-yr period. The specific sediment yield varies strongly along the Peruvian western Andes as a consequence of the spatial variation in climate, topography and land cover controlling sediment production and transport. We reported higher-than-average specific sediment yields for the central part (6°-11°S) with values of 2130 and 2300 t km−2 yr−1 and low and uniform yields of 39 to 551 t km−2 yr−1 in the southern part (11° − 14.5° S). Given the scarcity of data on sediment yield, we included an uncertainty assessment based on bootstrapping approaches as to get a better grasp on the potential range of specific sediment yields in the study region. Using statistical techniques including Spearman correlation rank, univariate and multivariate regression analyses, we were able to determine the importance of the 22 environmental variables on the specific sediment yield. About 55 % of the observed variance can be explained by river discharge (Q 90) and river steepness index (ks 50). By adding an anthropogenic variable based on land cover, the explained variance in SSY increases up to 63 %, however, the effects of land cover on specific sediment yield are not clear because of spurious correlation between land cover, river discharge and topography. Our study therefore provides important new insights in the ongoing scientific debate on sediment yield variability in the western Andes. [ABSTRACT FROM AUTHOR]

• Soil erosion process on frozen-stony slope is experimentally investigated. • Sediment concentration on frozen-stony slope follows linear-exponent curves. • The impacts of thawed soil depth and rock fragment content on sediment transport process are quantified. Rill erosion on frozen-stony slope in high-altitude or high-latitude areas commonly undergo freeze–thaw cycle, which is significantly influenced by partially thawed soil with rock fragment. This research aims to investigate the influences of thawed soil depth (TSD) and rock fragment content (RFC) on rill erosion and quantifying the mathematical relationships among them. The laboratory experiment is conducted to evaluate the influences of TSD (1, 2, 5, and 10 cm) and RFC (0%, 10%, 20%, and 50%) on sediment delivery processes by concentrated meltwater flow under three slope gradients of 5°, 10°, and 15°, and three flow rates of 1, 2, and 4 L min−1 at nine rill lengths from 0.5 m to 8.0 m. Five runoff samples are obtained from each experiment run and used to calculate sediment concentration (SC). The SC increases linearly and then exponentially with rill length to approximate the extremum and fits well with piecewise functions. Restrictive effect of TSD and RFC on sediment supply is evident during linear stage induced by shallow TSD, which keeps a long distance under shallow TSD and low RFC to collect sufficient sediment for exponential period. However, TSD and RFC impacts become apparent during the exponential period and lead to higher sediment yield with RFC of 10% and 20% than that on totally thawed soil without rock fragment. In this research, the positive effect on sediment yield increases with RFC increases from 10% to 20%, which may need to be eliminated for efficiency in erosion control. In contrast to low RFC, the protection impact of rock fragment always exerts with RFC of 50%. The experimental data and the functional relationship can provide the basic knowledge for evaluating the model parameters such as soil detachment rate and erodibility of rill erosion on frozen-stony slope. [ABSTRACT FROM AUTHOR]

• Upslope sediment-laden flow caused additional erosion in ephemeral gully zone. • Transport-dominated sediment regime was found under filed and laboratory conditions. • An increase in sediment concentration of inflow decreased downslope soil erosion rates. • Laboratory simulations verified the field monitoring results for extreme rainfall events. Ephemeral gully (EG) is an important linear erosion feature, often occurring at mid-slope position, that can be greatly influenced by upslope inflow and its sediment transport capacity. How sediment concentration in upslope inflow influences downslope EG erosion is still unclear. Thus, field monitoring on a natural hillslope and indoor simulations on a dual-box system were conducted to better understand their relationship. The results showed that both field monitoring and indoor simulation displayed the additional sediment delivery caused by upslope sediment-laden flow, verifying the transport-dominated sediment regime in EG systems. In field observations, the sediment increment coefficient (SIC , ratio of net sediment delivery caused by upslope sediment-laden flow to the total sediment delivery) on an event scale varied from 4.6% to 88.6%. In indoor simulations, the SIC changed from 24.9% to 87.5%. Indoor simulation experiments with a range of 0–378.2 g L−1 sediment concentration supplied by a feeder box, showed that SIC linearly decreased as sediment concentration of upslope inflow increased. Field monitoring showed complicated phenomenon because of natural random variations. For rainfall events with PI 30 (the product of precipitation and maximum 30-minute rainfall intensity) larger than 400 mm2 h−1 (similar to the designed extreme rainfall in laboratory simulations), SIC also generally decreased as sediment concentration of upslope inflow increased, especially when sediment concentration of upslope inflow was smaller than 400 g L−1. Thus, laboratory simulations verified the field monitoring results of extreme rainfall events with large rainfall amounts and intensities. This study illustrated the necessity of in-situ field monitoring and indicated that design of indoor simulation experiments needs more comprehensive considerations on complicated hydrological and sediment conditions. [ABSTRACT FROM AUTHOR]

• Upslope sediment-laden flow caused additional erosion in ephemeral gully zone. • Transport-dominated sediment regime was found under filed and laboratory conditions. • An increase in sediment concentration of inflow decreased downslope soil erosion rates. • Laboratory simulations verified the field monitoring results for extreme rainfall events. Ephemeral gully (EG) is an important linear erosion feature, often occurring at mid-slope position, that can be greatly influenced by upslope inflow and its sediment transport capacity. How sediment concentration in upslope inflow influences downslope EG erosion is still unclear. Thus, field monitoring on a natural hillslope and indoor simulations on a dual-box system were conducted to better understand their relationship. The results showed that both field monitoring and indoor simulation displayed the additional sediment delivery caused by upslope sediment-laden flow, verifying the transport-dominated sediment regime in EG systems. In field observations, the sediment increment coefficient (SIC , ratio of net sediment delivery caused by upslope sediment-laden flow to the total sediment delivery) on an event scale varied from 4.6% to 88.6%. In indoor simulations, the SIC changed from 24.9% to 87.5%. Indoor simulation experiments with a range of 0–378.2 g L−1 sediment concentration supplied by a feeder box, showed that SIC linearly decreased as sediment concentration of upslope inflow increased. Field monitoring showed complicated phenomenon because of natural random variations. For rainfall events with PI 30 (the product of precipitation and maximum 30-minute rainfall intensity) larger than 400 mm2 h−1 (similar to the designed extreme rainfall in laboratory simulations), SIC also generally decreased as sediment concentration of upslope inflow increased, especially when sediment concentration of upslope inflow was smaller than 400 g L−1. Thus, laboratory simulations verified the field monitoring results of extreme rainfall events with large rainfall amounts and intensities. This study illustrated the necessity of in-situ field monitoring and indicated that design of indoor simulation experiments needs more comprehensive considerations on complicated hydrological and sediment conditions. [ABSTRACT FROM AUTHOR]