Search

Convergent-beam electron diffraction (CBED) is a well-established probe for spatial symmetries of crystalline samples, mainly exploiting the well-defined mapping between the diffraction groups (symmetry group of CBED patterns) and the point-group symmetries of the crystalline sample. In this work, we extend CBED to determine magnetic point groups. We construct all magnetic CBED groups, of which there exist 125. Then, we provide the complete mapping of the 122 magnetic point groups to corresponding magnetic CBED groups for all crystal orientations. In order to verify the group-theoretical considerations, we conduct electron-scattering simulations on antiferromagnetic crystals and provide guidelines for the experimental realization. Based on its feasibility using existing technology, as well as on its accuracy, high spatial resolution, and small required sample size, magnetic CBED promises to be become a valuable alternative method for magnetic structure determination.

Assemblies of plasmonic nanoparticles (NPs) support hybridized modes of localized surface plasmons (LSPs), which delocalize in geometrically well-ordered arrangements. Here, the hybridization behavior of LSPs in geometrically completely disordered arrangements of Au NPs fabricated by an e-beam synthesis method is studied. Employing electron energy loss spectroscopy in a scanning transmission electron microscope in combination with numerical simulations, the disorder-driven spatial and spectral localization of the coupled LSP modes that depend on the NP thickness is revealed. Below 0.4 nm sample thickness (flat NPs), localization increases towards higher hybridized LSP mode energies. In comparison, above 10 nm thickness, a decrease of localization (an increase of delocalization) with higher mode energies is observed. In the intermediate thickness regime, a transition of the energy dependence of the localization between the two limiting cases, exhibiting a transition mode energy with minimal localization, is observed. This behavior is mainly driven by the energy and thickness dependence of the polarizability of the individual NPs.

Electron-beam-induced conversion of materials in a transmission electron microscope uses the high power density of a localized electron beam of acceleration voltages above 100 kV as an energy source to transform matter at the sub-micron scale. Here, the e-beam-induced transformation of precursor microparticles employing a low-energy e-beam with an acceleration voltage of 30 kV in a scanning electron microscope is developed to increase the versatility and efficiency of the technique. Under these conditions, the technique can be classified between e-beam lithography, where the e-beam is used to mill holes in or grow some different material onto a substrate, and e-beam welding, where matter can be welded together when overcoming the melting phase. Modifying gold microparticles on an amorphous SiOx substrate reveals the dominant role of inelastic electron-matter interaction and subsequent localized heating for the observed melting and vaporization of the precursor microparticles under the electron beam. Monte-Carlo scattering simulations and thermodynamic modeling further support the findings.

We use momentum-dependent electron energy-loss spectroscopy in transmission to study collective charge excitations in the layer metal Sr$_2$RuO$_4$. This metal has a transition from a perfect Fermi liquid below $T\approx30\,$K into a "strange" metal phase above $T\approx800\,$K. We cover a complete range between in-phase and out-of-phase oscillations. Outside the classical range of electron-hole excitations, leading to a Landau damping, we observe well-defined plasmons. The optical (acoustic) plasmon due to an in-phase (out-of-phase) charge oscillation of neighbouring layers exhibits a quadratic (linear) positive dispersion. Using a model for the Coulomb interaction of the charges in a layered system, it is possible to describe the range of optical plasmon excitations at high energies in a mean-field random phase approximation without taking correlation effects into account. In contrast, resonant inelastic X-ray scattering data show at low energies an enhancement of the acoustic plasmon velocity due to correlation effects. This difference can be explained by an energy dependent effective mass which changes from $\approx$ 3.5 at low energy to 1 at high energy near the optical plasmon energy. There are no signs of over-damped plasmons predicted by holographic theories.

Considering the growing interest in magnetic materials for unconventional computing, data storage, and sensor applications, there is active research not only on material synthesis but also characterisation of their properties. In addition to structural and integral magnetic characterisations, imaging of magnetization patterns, current distributions and magnetic fields at nano- and microscale is of major importance to understand the material responses and qualify them for specific applications. In this roadmap, we aim to cover a broad portfolio of techniques to perform nano- and microscale magnetic imaging using SQUIDs, spin center and Hall effect magnetometries, scanning probe microscopies, x-ray- and electron-based methods as well as magnetooptics and nanoMRI. The roadmap is aimed as a single access point of information for experts in the field as well as the young generation of students outlining prospects of the development of magnetic imaging technologies for the upcoming decade with a focus on physics, materials science, and chemistry of planar, 3D and geometrically curved objects of different material classes including 2D materials, complex oxides, semi-metals, multiferroics, skyrmions, antiferromagnets, frustrated magnets, magnetic molecules/nanoparticles, ionic conductors, superconductors, spintronic and spinorbitronic materials.

The so-called Transport of Intensity Equation (TIE) phase retrieval technique is widely applied in light, x-ray and electron optics to reconstruct, e.g., refractive indices, electric and magnetic fields in solids. Here, we present a largely improved TIE reconstruction algorithm, which properly considers intensity variations as well as unknown boundary conditions in a finite difference implementation of the Transport of Intensity partial differential equation. That largely removes reconstruction artifacts encountered in state-of-the-art Poisson solvers of the TIE, and hence significantly increases the applicability of the technique.

The self-assembly of anisotropic nanocrystals (stabilized by organic capping molecules) with pre-selected composition, size, and shape allows for the creation of nanostructured materials with unique structures and features. For such a material, the shape and packing of the individual nanoparticles play an important role. This work presents a synthesis procedure for {\omega}-thiol-terminated polystyrene (PS-SH) functionalized gold nanooctahedra of variable size (edge length 37, 46, 58, and 72 nm). The impact of polymer chain length (Mw: 11k, 22k, 43k, and 66k g/mol) on the growth of colloidal crystals (e.g. mesocrystals) and their resulting crystal structure is investigated. Small-angle X-ray scattering (SAXS) and scanning transmission electron microscopy (STEM) methods provide a detailed structural examination of the self-assembled faceted mesocrystals based on octahedral gold nanoparticles of different size and surface functionalization. Three-dimensional angular X-ray cross-correlation analysis (AXCCA) enables high-precision determination of the superlattice structure and relative orientation of nanoparticles in mesocrystals. This approach allows us to perform non-destructive characterization of mesocrystalline materials and reveals their structure with resolution down to the nanometer scale., Comment: 46 pages, 5 figures, 12 Supplementary Information figures, 1 Table in the main text, 1 Table in Supplementary Information

Antiferromagnets have recently been propelled to the forefront of spintronics by their high potential for revolutionizing memory technologies. For this, understanding the formation and driving mechanisms of the domain structure is paramount. In this work, we investigate the domain structure in a thin-film canted antiferromagnet $\alpha$-Fe$_2$O$_3$. We find that the internal destressing fields driving the formation of domains do not follow the crystal symmetry of $\alpha$-Fe$_2$O$_3$, but fluctuate due to substrate clamping. This leads to an overall isotropic distribution of the N\'eel order with locally varying effective anisotropy in antiferromagnetic thin films. Furthermore, we show that the weak ferromagnetic nature of $\alpha$-Fe$_2$O$_3$ leads to a qualitatively different dependence on magnetic field compared to collinear antiferromagnets such as NiO. The insights gained from our work serve as a foundation for further studies of electrical and optical manipulation of the domain structure of antiferromagnetic thin films., Comment: 9 pages, 5 figures

Linear magnetoresistance (LMR) is of particular interest for memory, electronics, and sensing applications, especially when it does not saturate over a wide range of magnetic fields. One of its principal origins is local mobility or density inhomogeneities, often structural, which in the Parish-Littlewood theory leads to an unsaturating LMR proportional to mobility. Structural disorder, however, also tends to limit the mobility and hence the overall LMR amplitude. An alternative route to achieve large LMR is via non-structural inhomogeneities which do not affect the zero field mobility, like magnetic domains. Here, linear positive magnetoresistance caused by magnetic texture is reported in \ch{LaTiO3}/\ch{SrTiO3} heterostructures. The LMR amplitude reaches up to 6500\% at 9T. This colossal value is understood by the unusual combination of a very high thin film mobility, up to 40 000 cm$^2$/V.s, and a very large coverage of low-mobility regions. These regions correlate with a striped magnetic structure, compatible with a spiral magnetic texture in the \ch{LaTiO3} film, revealed by low temperature Lorentz transmission electron microscopy. These results provide a novel route for the engineering of large-LMR devices.

Here, by making use of medium and high resolution autocorrected off-axis electron holography, we directly probe the electrostatic potential as well as in-plane and out-of-plane charge delocalization at edges and steps in multilayer hexagonal boron nitride. In combination with ab-initio calculations, the data allows to directly reveal the formation of out-of-plane covalent bonds at folded zig-zag edges and steps comprising two monolayers and the absence of which at monolayer steps. The technique paves the way for studying other charge (de)localization phenomena in 2D materials, e.g., at polar edges, topological edge states and defects.

Magnetic dilution of a well-established Kitaev candidate system is realized in the substitutional Ru$_{1-x}$Rh$_x$Cl$_3$ series ($x = 0.02-0.6$). Optimized syntheses protocols yield uniformly-doped single crystals and polycrystalline powders that are isostructural to the parental $\alpha$-RuCl$_3$ as per X-ray diffraction. The Rh content $x$ is accurately determined by the quantitative energy-dispersive X-ray spectroscopy technique with standards. We determine the magnetic phase diagram of Ru$_{1-x}$Rh$_x$Cl$_3$ for in-plane magnetic fields from magnetization and specific-heat measurements as a function of $x$ and stacking periodicity, and identify the suppression of the magnetic order at $x \approx 0.2$ towards a disordered phase, which does not show any clear signature of freezing into a spin glass. Comparing with previous studies on the substitution series Ru$_{1-x}$Ir$_x$Cl$_3$, we propose that chemical pressure would contribute to the suppression of magnetic order especially in Ru$_{1-x}$Ir$_x$Cl$_3$ and that the zigzag magnetic ground state appears to be relatively robust with respect to the dilution of the Kitaev--$\Gamma$--Heisenberg magnetic lattice. We also discovered a slight dependence of the magnetic properties on thermal cycling, which would be due to an incomplete structural transition.

Cylindrical magnetic nanowires with large transversal magnetocrystalline anisotropy have been shown to sustain non-trivial magnetic configurations resulting from the interplay of spatial confinement, exchange, and anisotropies. Exploiting these peculiar 3D spin configurations and their solitonic inhomogeneities are prospected to improve magnetization switching in future spintronics, such as power-saving magnetic memory and logic applications. Here we employ holographic vector field electron tomography to reconstruct the remanent magnetic states in CoNi nanowires with 10 nm resolution in 3D, with a particular focus on domain walls between remanent states and ubiquitous real-structure effects stemming from irregular morphology and anisotropy variations. By tuning the applied magnetic field direction, both longitudinal and transverse multi-vortex states of different chiralities and peculiar 3D features such as shifted vortex cores are stabilized. The chiral domain wall between the longitudinal vortices of opposite chiralities exhibits a complex 3D shape characterized by a push out of the central vortex line and a gain in exchange and anisotropy energy. A similar complex 3D texture, including bent vortex lines, forms at the domain boundary between transverse-vortex states and longitudinal configurations. Micromagnetic simulations allow an understanding of the origin of the observed complex magnetic states., Comment: 22 pages, 5 figures, preprent of original paper

Two-dimensional random metal networks possess unique electrical and optical properties, such as almost total optical transparency and low sheet resistance, which are closely related to their disordered structure. Here we present a detailed experimental and theoretical investigation of their plasmonic properties, revealing Anderson (disorder-driven) localized surface plasmon (LSP) resonances of very large quality factors and spatial localization close to the theoretical maximum, which couple to electromagnetic waves. Moreover, they disappear above a geometry-dependent threshold at ca. 1.7 eV in the investigated Au networks, explaining their large transparencies in the optical spectrum.

Hybrid metallic nanoparticles encapsulated in oxide shells are currently intensely studied for plasmonic applications in sensing, medicine, catalysis, and photovoltaics. Here, we introduce a method for the synthesis of Au@Ag@SiO$_2$ cubes with a uniform silica shell of variable and adjustable thickness in the nanometer range; and we demonstrate their excellent, highly reproducible, and tunable optical response. Varying the silica shell thickness, we could tune the excitation energies of the single nanoparticle plasmon modes in a broad spectral range between 2.55 and 3.25\,eV. Most importantly, we reveal a strong coherent coupling of the surface plasmons at the silver-silica interface with the whispering gallery resonance at the silica-vacuum interface leading to a significant field enhancement at the encapsulated nanoparticle surface in the range of 100\,\% at shell thicknesses $t\,$$\simeq\,$20\,nm. Consequently, the synthesis method and the field enhancement open pathways to a widespread use of silver nanoparticles in plasmonic applications including photonic crystals and may be transferred to other non-precious metals.

The heterostructure consisting of the Mott insulator LaVO$_3$ and the band insulator SrTiO$_3$ is considered a promising candidate for future photovoltaic applications. Not only does the (direct) excitation gap of LaVO$_3$ match well the solar spectrum, but its correlated nature and predicted built-in potential, owing to the non-polar/polar interface when integrated with SrTiO$_3$, also offer remarkable advantages over conventional solar cells. However, experimental data beyond the observation of a thickness-dependent metal-insulator transition is scarce and a profound, microscopic understanding of the electronic properties is still lacking. By means of soft and hard X-ray photoemission spectroscopy as well as resistivity and Hall effect measurements we study the electrical properties, band bending, and band alignment of LaVO$_3$/SrTiO$_3$ heterostructures. We find a critical LaVO$_3$ thickness of five unit cells, confinement of the conducting electrons to exclusively Ti 3$d$ states at the interface, and a potential gradient in the film. From these findings we conclude on electronic reconstruction as the driving mechanism for the formation of the metallic interface in LaVO$_3$/SrTiO$_3$., Comment: 13 pages, 12 figures

This article addresses extraction of physically meaningful information from STEM EELS and EDX spectrum-images using methods of Multivariate Statistical Analysis. The problem is interpreted in terms of data distribution in a multi-dimensional factor space, which allows for a straightforward and intuitively clear comparison of various approaches. A new computationally efficient and robust method for finding physically meaningful endmembers in spectrum-image datasets is presented. The method combines the geometrical approach of Vertex Component Analysis with the statistical approach of Bayesian inference. The algorithm is described in detail at an example of EELS spectrum-imaging of a multi-compound CMOS transistor.

Layered van~der~Waals materials of the family TaTMTe$_4$ (TM=Ir, Rh, Ru) are showing very interesting electronic properties. Here we report the synthesis, crystal growth and structural characterization of TaIrTe$_4$, TaRhTe$_4$, TaIr$_{1-x}$Rh$_{x}$Te$_4$ ($x = 0.06$; 0.14; 0.78; 0.92) and Ta$_{1+x}$Ru$_{1-x}$Te$_4$ single crystals. For Ta$_{1+x}$Ru$_{1-x}$Te$_4$ off-stoichiometry is shown. X-ray powder diffraction confirms that TaRhTe4 is isostructural to TaIrTe4. We show that all these compounds are metallic with diamagnetic behavior. Ta$_{1.26(2)}$Ru$_{0.75(2)}$Te$_{4.000(8)}$ exhibits an upturn in the resistivity at low temperatures which is strongly field dependent. Below $T \approx 4$K we observed signatures of the superconductivity in the TaIr$_{1-x}$Rh$_{x}$Te$_4$ compounds for $x = 0.92$. Magnetotransport measurements on all samples show weak magnetoresistance (MR) field dependence that is typically quadratic-in-field. However, for TaIr$_{1-x}$Rh$_{x}$Te$_4$ with $x\approx 0.78$, the MR has a linear term dominating in low fields that indicates the presence of Dirac cones in the vicinity of the Fermi energy. For TaRhTe$_4$ series the MR is almost isotropic. We have performed electronic structure calculations for isostructural TaIrTe$_4$ and TaRhTe$_4$ together with the projected total density of states. The main difference is appearance of the Rh-band close to the Fermi level.

Charged particle optics, the description of particle trajectories in the vicinity of some optical axis, describe the imaging properties of particle optics devices. Here, we present a complete and compact description of charged particle optics employing perturbative expansion of Hamiltonian mechanics. The derived framework allows the straightforward computation of transversal and longitudinal (chromatic) properties of static and dynamic optical devices with straight and curved optical axes. It furthermore gives rise to geometric integration schemes preserving the symplectic phase space structure and pertaining Lagrange invariants, which may be employed to derive analytic approximations of aberration coefficients and efficient numerical trajectory solvers.

Mesocrystals are nanostructured materials consisting of individual nanocrystals having a preferred crystallographic orientation. On mesoscopic length scales, the properties of mesocrystals are strongly affected by structural heterogeneity. Here, we report the detailed structural characterization of a faceted mesocrystal grain self-assembled from 60 nm sized gold nanocubes. Using coherent X-ray diffraction imaging, we determined the structure of the mesocrystal with the resolution sufficient to resolve each gold nanoparticle. The reconstructed electron density of the gold mesocrystal reveals its intrinsic structural heterogeneity, including local deviations of lattice parameters, and the presence of internal defects. The strain distribution shows that the average superlattice obtained by angular X-ray cross-correlation analysis and the real, multidomain structure of a mesocrystal are very close to each other, with a deviation less than 10 percent. These results will provide an important impact to understanding of the fundamental principles of structuring and self-assembly including ensuing properties of mesocrystals., Comment: 28 pages, 8 figures, 50 references

Magnetic skyrmions are stable topological solitons with complex non-coplanar spin structures. Their nanoscopic size and the low electric currents required to initiate and control their motion has opened a new field of research, skyrmionics, that aims at using skyrmions as information carriers for data storage and manipulation. Recent advances in skyrmionics prompt for a thorough understanding of the detailed three-dimensional (3D) spin texture of a skyrmion including skyrmion-skyrmion interactions and their coupling to surfaces and interfaces. These properties crucially affect application-related aspects such as the stability and mobility of skyrmions in confined structures. To date, however, experimental techniques to measure the three-dimensional spin texture with nanometer resolution are largely missing. We therefore adapt holographic vector field electron tomography to the problem and report on the first quantitative reconstruction of the 3D spin texture of skyrmions with sub-10 nanometer resolution. The reconstructed textures reveal a variety of previously unseen local deviations from a homogeneous Bloch character within the skyrmion tubes (SkTs), details of the collapse of the skyrmion texture at surfaces, and a correlated modulation of the SkT in FeGe along their tube axes. The quantitative 3D data of the magnetic induction also allow to experimentally confirm some principles of skyrmion formation by deriving spatially resolved maps of the magnetic energy density across these magnetic solitons.

In the last decades, the blossoming of experimental breakthroughs in the domain of electron energy loss spectroscopy (EELS) has triggered a variety of theoretical developments. Those have to deal with completely different situations, from atomically resolved phonon mapping to electron circular dichroism passing by surface plasmon mapping. All of them rely on very different physical approximations and have not yet been reconciled, despite early attempts to do so. As an effort in that direction, we report on the development of a scalar relativistic quantum electrodynamic (QED) approach of the inelastic scattering of fast electrons. This theory can be adapted to describe all modern EELS experiments, and under the relevant approximations, can be reduced to any of the last EELS theories. In that aim, we present in this paper the state of the art and the basics of scalar relativistic QED relevant to the electron inelastic scattering. We then give a clear relation between the two once antagonist descriptions of the EELS, the retarded green Dyadic, usually applied to describe photonic excitations and the quasi-static mixed dynamic form factor (MDFF), more adapted to describe core electronic excitations of material. We then use this theory to establish two important EELS-related equations. The first one relates the spatially resolved EELS to the imaginary part of the photon propagator and the incoming and outgoing electron beam wavefunction, synthesizing the most common theories developed for analyzing spatially resolved EELS experiments. The second one shows that the evolution of the electron beam density matrix is proportional to the mutual coherence tensor, proving that quite universally, the electromagnetic correlations in the target are imprinted in the coherence properties of the probing electron beam., Comment: Re-Submission to SciPost. Updated version: minor revisions, SciPost template

The reduced dimensionality in two-dimensional materials leads a wealth of unusual properties, which are currently explored for both fundamental and applied sciences. In order to study the crystal structure, edge states, the formation of defects and grain boundaries, or the impact of adsorbates, high resolution microscopy techniques are indispensible. Here we report on the development of an electron holography (EH) transmission electron microscopy (TEM) technique, which facilitates high spatial resolution by an automatic correction of geometric aberrations. Distinguished features of EH beyond conventional TEM imaging are the gap-free spatial information signal transfer and higher dose efficiency for certain spatial frequency bands as well as direct access to the projected electrostatic potential of the 2D material. We demonstrate these features at the example of h-BN, at which we measure the electrostatic potential as a function of layer number down to the monolayer limit and obtain evidence for a systematic increase of the potential at the zig-zag edges., Comment: 8 pages, 5 figures

We have investigated the effect of potassium (K) intercalation on $2H$-MoS$_2$ using transmission electron energy-loss spectroscopy. For K concentrations up to approximately 0.4, the crystals appear to be inhomogeneous with a mix of structural phases and irregular potassium distribution. Above this intercalation level, MoS$_2$ exhibits a $2a \times 2a$ superstructure in the $ab$ plane and unit cell parameters of a = 3.20 $\unicode{x212B}$ and c = 8.23 $\unicode{x212B}$ indicating a conversion from the $2H$ to the $1T'$ or $1T''$ polytypes. The diffraction patterns also show a $\sqrt{3}a \times \sqrt{3}a$ and a much weaker $2\sqrt{3}a \times 2\sqrt{3}a$ superstructure that is very likely associated with the ordering of the potassium ions. A semiconductor-to-metal transition occurs signified by the disappearance of the excitonic features from the electron energy-loss spectra and the emergence of a charge carrier plasmon with an unscreened plasmon frequency of 2.78 eV. The plasmon has a positive, quadratic dispersion and appears to be superimposed with an excitation arising from interband transitions. The behavior of the plasmon peak energy positions as a function of potassium concentration shows that potassium stoichiometries of less than $\sim 0.3$ are thermodynamically unstable while higher stoichiometries up to $\sim 0.5$ are thermodynamically stable. Potassium concentrations greater than $\sim 0.5$ lead to the decomposition of MoS$_2$ and the formation of K$_2$S. The real part of the dielectric function and the optical conductivity of K$_{0.41}$MoS$_2$ were derived from the loss spectra via Kramers-Kronig analysis., Comment: 7 Figures, 2 Tables

We report an optimized chemical vapor transport method, which allows growing FeP single crystals up to 500 mg in mass and 80 $mm^{3}$ in volume. The high quality of the crystals obtained by this method was confirmed by means of EDX, high-resolution TEM, low-temperature single crystal XRD and neutron diffraction experiments. We investigated the transport and magnetic properties of the single crystals and calculated the electronic band structure of FeP. We show both theoretically and experimentally, that the ground state of FeP is metallic. The examination of the magnetic data reveals antiferromagnetic order below T$_{N}$ =119 K while transport remains metallic in both the paramagnetic and the antiferromagnetic phase. The analysis of the neutron diffraction data shows an incommensurate magnetic structure with the propagation vector Q=(0, 0, $\pm{\delta}$), where ${\delta}$ $\sim$ 0.2. For the full understanding of the magnetic state, further experiments are needed. The successful growth of large high-quality single crystals opens the opportunity for further investigations of itinerant magnets with incommensurate spin structures using a wide range of experimental tools.

Electronic topological states of matter exhibit novel types of responses to electromagnetic fields. The response of strong topological insulators, for instance, is characterized by a so-called axion term in the electromagnetic Lagrangian which is ultimately due to the presence of topological surface states. Here we develop the axion Mie theory for the electromagnetic response of spherical particles including arbitrary sources of fields, i.e., charge and current distributions. We derive an axion induced mixing of transverse magnetic and transverse electric modes which are experimentally detectable through small induced rotations of the field vectors. Our results extend upon previous analyses of the problem. Our main focus is on the experimentally relevant problem of electron energy loss spectroscopy in topological insulators, a technique that has so far not yet been used to detect the axion electromagnetic response in these materials., Comment: Submission to SciPost

PtBi$_2$ is a polymorphic system with interesting electronic properties. Here we report optimized crystal growth and structural characterization of pyrite-type and trigonal modification of PtBi$_2$. Selected area electron diffraction, X-ray powder diffraction and further Rietveld refinement confirms that trigonal PtBi$_2$ crystallizes in non-centrosymmetric $P31m$ space group, pyrite-type PtBi$_2$ in $Pa\bar{3}$ space group. Series of Pt$_{1-x}$Rh$_x$Bi$_2$ samples was obtained for $x=0, 0.03, 0.35$ in the trigonal PtBi$_2$ structure. These Pt$_{1-x}$Rh$_x$Bi$_2$ compounds become superconducting where critical temperature increases from $T_c=600$ mK for $x=0$ up to $T_c=2.7$ K for $x=0.35$. Furthermore we calculate the electronic band structure, using the structure parameters obtained. The calculated density of states (DOS) shows a minimum for the stochiometric compound at the Fermi level. These findings warrant further research by broader array of experimental techniques, as well as the effect of the substitution on the non-trivial band structure.

Inspired by chains of ferrimagnetic nanocrystals (NCs) in magnetotactic bacteria (MTB), the synthesis and detailed characterization of ferrimagnetic magnetite NC chain-like assemblies is reported. An easy green synthesis route in a thermoreversible gelatin hydrogel matrix is used. The structure of these magnetite chains prepared with and without gelatin is characterized by means of transmission electron microscopy, including electron tomography (ET). These structures indeed bear resemblance to the magnetite assemblies found in MTB, known for their mechanical flexibility and outstanding magnetic properties and known to crystallographically align their magnetite NCs along the strongest <111> magnetization easy axis. Using electron holography (EH) and angular dependent magnetic measurements, the magnetic interaction between the NCs and the generation of a magnetically anisotropic material can be shown. The electro- and magnetostatic modeling demonstrates that in order to precisely determine the magnetization (by means of EH) inside chain-like NCs assemblies, their exact shape, arrangement and stray-fields have to be considered (ideally obtained using ET).

Chains of metallic nanoparticles sustain strongly confined surface plasmons with relatively low dielectric losses. To exploit these properties in applications,such as waveguides, the fabrication of long chains of low disorder and a thorough understanding of the plasmon-mode properties, such as dispersion relations, are indispensable. Here, we use a wrinkled template for directed self-assembly to assemble chains of gold nanoparticles. With this up-scalable method, chain lengths from two particles (140 nm) to 20 particles (1500 nm) and beyond can be fabricated. Electron energy-loss spectroscopy supported by boundary element simulations, finite-difference time-domain, and a simplified dipole coupling model reveal the evolution of a band of plasmonic waveguide modes from degenerated single-particle modes in detail. In striking difference from plasmonic rod-like structures, the plasmon band is confined in excitation energy, which allows light manipulations below the diffraction limit. The non-degenerated surface plasmon modes show suppressed radiative losses for efficient energy propagation over a distance of 1500 nm.

Electron Holographic Tomography was used to obtain 3-dimensional reconstructions of the morphology and electrostatic potential gradient of axial GaInP/InP nanowire tunnel diodes. Crystal growth was carried out in two opposite directions: GaInP:Zn/InP:S and InP:Sn/GaInP:Zn, using Zn as the p-type dopant in the GaInP, but with changes to the n-type dopant (S or Sn) in the InP. Secondary electron and electron beam induced current images obtained using scanning electron microscopy indicated the presence of p-n junctions in both cases and current-voltage characteristics measured via lithographic contacts showed the negative differential resistance, characteristic of band-to-band tunneling, for both diodes. EHT measurements confirmed a short depletion width in both cases ($21 \pm 3$ nm), but different built-in potentials, $V_{bi}$, of 1.0 V for the p-type (Zn) to n-type (S) transition, and 0.4 V for both were lower than the expected 1.5 V for these junctions, if degenerately-doped. Charging induced by the electron beam was evident in phase images which showed non-linearity in the surrounding vacuum, most severe in the case of the nanowire grounded at the \emph{p}-type Au contact. We attribute their lower $V_{bi}$ to asymmetric secondary electron emission, beam-induced current biasing and poor grounding contacts.

STEM XEDS spectrum images can be drastically denoised by application of the principal component analysis (PCA). This paper looks inside the PCA workflow step by step on an example of a complex semiconductor structure consisting of a number of different phases. Typical problems distorting the principal components decomposition are highlighted and solutions for the successful PCA are described. Particular attention is paid to the optimal truncation of principal components in the course of reconstructing denoised data. A novel accurate and robust method, which overperforms the existing truncation methods is suggested for the first time and described in details., Comment: 21 pages, 14 figures

Complex 3D magnetic textures in nanomagnets exhibit rich physical properties, for example in their dynamic interaction with external fields and currents, and play an increasing role for current technological challenges such as energy-efficient memory devices. To study these magnetic nanostructures including their dependency on geometry, composition and crystallinity, a 3D characterization of the magnetic field with nanometer spatial resolution is indispensable. Here we show how holographic vector field electron tomography can reconstruct all three components of magnetic induction as well as the electrostatic potential of a Co/Cu nanowire with sub 10\,nm spatial resolution. We address the workflow from acquisition, via image alignment to holographic and tomographic reconstruction. Combining the obtained tomographic data with micromagnetic considerations we derive local key magnetic characteristics, such as magnetization current or exchange stiffness, and demonstrate how magnetization configurations, such as vortex states in the Co-disks, depend on small structural variations of the as-grown nanowire., Comment: 10 pages, 4 figures

Fundamental solid state physics phenomena typically occur at very low temperatures, requiring liquid helium cooling in experimental studies. Transmission electron microscopy is a well-established characterization method, which allows probing crucial materials properties down to nanometer and even atomic resolution. Due to the limited space in the object plane, however, suitable liquid-helium cooling is very challenging. To overcome this limitation, resolving power was sacrificed in our Dresden in-situ (S)TEM special, resulting in more than 60 mm usable experimental space in all directions with the specimen in the center. With the installation of a continuous-flow liquid-helium cryostat, any temperature between 6.5 K and 400 K can be set precisely and kept for days. The information limit of the Dresden in-situ (S)TEM special is about 5 nm. It is shown that the resolution of the Dresden in-situ (S)TEM special is currently not limited by aberrations, but by external instabilities, that are currently addressed., Comment: 9 Pages, 10 Figures

Utilizing the Pauli equation based multislice method, introduced in Phys. Rev. Lett. 116, 127203 (2016), we study the atomic resolution differential phase contrast (DPC) imaging on an example of a hard magnet FePt with in-plane magnetization. Simulated center of mass pattern in a scanning transmission electron microscopy (STEM) experiment carries information about both electric and magnetic fields. The momentum transfer remains curl-free, which has consequences for interpretation of the integrated DPC technique. The extracted magnetic component of the pattern is compared to the expected projected microscopic magnetic field as obtained by density functional theory calculation. Qualitative agreement is obtained for low sample thicknesses and a suitable range of collection angles., Comment: 9 pages, 8 figures

Crystal growth of MnBi$_{2}$Te$_{4}$ has delivered the first experimental corroboration of the 3D antiferromagnetic topological insulator state. Our present results confirm that the synthesis of MnBi$_{2}$Te$_{4}$ can be scaled-up and strengthen it as a promising experimental platform for studies of a crossover between magnetic ordering and non-trivial topology. High-quality single crystals of MnBi$_{2}$Te$_{4}$ are grown by slow cooling within a narrow range between the melting points of Bi$_{2}$Te$_{3}$ (586 {\deg}C) and MnBi$_{2}$Te$_{4}$ (600 {\deg}C). Single crystal X-ray diffraction and electron microscopy reveal ubiquitous antisite defects in both cation sites and, possibly, Mn vacancies. Powders of MnBi$_{2}$Te$_{4}$ can be obtained at subsolidus temperatures, and a complementary thermochemical study establishes a limited high-temperature range of phase stability. Nevertheless, quenched powders are stable at room temperature and exhibit long-range antiferromagnetic ordering below 24 K. The expected Mn(II) out-of-plane magnetic state is confirmed by the magnetization, X-ray photoemission, X-ray absorption and linear dichroism data. MnBi$_{2}$Te$_{4}$ exhibits a metallic type of resistivity in the range 4.5-300 K. The compound is an n-type conductor that reaches a thermoelectric figure of merit up to ZT = 0.17. Angle-resolved photoemission experiments provide evidence for a surface state forming a gapped Dirac cone.

The complex interplay of elastic and inelastic scattering amenable to different levels of approximation constitutes the major challenge for the computation and hence interpretation of TEM-based spectroscopical methods. The two major approaches to calculate inelastic scattering cross sections of fast electrons on crystals-Yoshioka-equations-based forward propagation and the reciprocal wave method-are founded in two conceptually differing schemes-a numerical forward integration of each inelastically scattered wave function, yielding the exit density matrix, and a computation of inelastic scattering matrix elements using elastically scattered initial and final states (double channeling). Here, we compare both approaches and show that the latter is computationally competitive to the former by exploiting analytical integration schemes over multiple excited states. Moreover, we show how to include full nonlocality of the inelastic scattering event, neglected in the forward propagation approaches, at no additional computing costs in the reciprocal wave method. Detailed simulations show in some cases significant errors due to the z-locality approximation and hence pitfalls in the interpretation of spectroscopical TEM results.

The non-destructive characterization of nanoscale devices, such as those based on semiconductor nanowires, in terms of functional potentials is crucial for correlating device properties with their morphological/materials features, as well as for precisely tuning and optimizing their growth process. Electron holographic tomography (EHT) has been used in the past to reconstruct the total potential distribution in 3D but hitherto lacked a quantitative approach to separate potential variations due to chemical composition changes (mean inner potential - MIP) and space charges. In this letter, we combine and correlate EHT and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) tomography on an individual <111> oriented GaAs-AlGaAs core-multishell nanowire (NW). We obtain excellent agreement between both methods in terms of the determined Al concentration within the AlGaAs shell, as well as thickness variations of the few nanometer thin GaAs shell acting as quantum well tube. Subtracting the MIP determined from the STEM tomogram, enables us to observe functional potentials at the NW surfaces and at the Au-NW interface, both ascribed to surface/interface pinning of the semiconductor Fermi level.

In the present work, different synthesis procedures have been demonstrated to fill carbon nanotubes (CNTs) with $\mathrm{Fe}_{1-x}\mathrm{Ni}_x$ alloy nanoparticles (x = 0.33, 0.5). CNTs act as templates for the encapsulation of magnetic nanoparticles, and provide a protective shield against oxidation as well as prevent nanoparticles agglomeration. By variation of the reaction parameters, the purity of the samples, degree of filling, the composition and size of filling nanoparticles have been tailored and therefore the magnetic properties. The samples were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Bright-field (BF) TEM tomography, X-ray powder diffraction, superconducting quantum interference device (SQUID) and thermogravimetric analysis (TGA). The Fe1-xNix-filled CNTs show a huge enhancement in the coercive fields compared to the corresponding bulk materials, which make them excellent candidates for several applications such as magnetic storage devices.

Plasmonic nanostructures and devices are rapidly transforming light manipulation technology by allowing to modify and enhance optical fields on sub-wavelength scales. Advances in this field rely heavily on the development of new characterization methods for the fundamental nanoscale interactions. However, the direct and quantitative mapping of transient electric and magnetic fields characterizing the plasmonic coupling has been proven elusive to date. Here we demonstrate how to directly measure the inelastic momentum transfer of surface plasmon modes via the energy-loss filtered deflection of a focused electron beam in a transmission electron microscope. By scanning the beam over the sample we obtain a spatially and spectrally resolved deflection map and we further show how this deflection is related quantitatively to the spectral component of the induced electric and magnetic fields pertaining to the mode. In some regards this technique is an extension to the established differential phase contrast into the dynamic regime., Comment: 7 pages, 5 figures

Envisaged applications of skyrmions in magnetic memory and logic devices crucially depend on the stability and mobility of these topologically non-trivial magnetic textures in thin films. We present for the first time quantitative maps of the magnetic induction that provide evidence for a 3D modulation of the skyrmionic spin texture. The projected in-plane magnetic induction maps as determined from in-line and off-axis electron holography carry the clear signature of Bloch skyrmions. However, the magnitude of this induction is much smaller than the values expected for homogeneous Bloch skyrmions that extend throughout the thickness of the film. This finding can only be understood, if the underlying spin textures are modulated along the out-of-plane z direction. The projection of (the in-plane magnetic induction of) helices is further found to exhibit thickness-dependent lateral shifts, which show that this z modulation is accompanied by an (in-plane) modulation along the x and y directions.

In this work we introduce the Rytov approximation in the scope of high-energy electron scattering with the motivation of developing better linear models for electron scattering. Such linear models play an important role in tomography and similar reconstruction techniques. Conventional linear models, such as the Phase Grating Approximation, have reached their limits in current and forsee- able applications, most importantly in achieving three-dimensional atomic resolution using electron holographic tomography. The Rytov approximation incorporates propagation effects which are the most pressing limitation of conventional models. While predominately used in the weak-scattering regime of light microscopy we show that the Rytov approximation can give reasonable results in the inherently strong-scattering regime of transmission electron microscopy.

Based on a recent claim [Phys. Rev. Lett. 116, 127203 (2016)] that electron vortex can be used to image magnetism at the nanoscale in elastic scattering experiments, using transmission electron microscopy, a comprehensive computational study is performed to study magnetic effects in the paraxial regime of elastic electron scattering in magnetic solids. Magnetic interactions from electron vortex beams, spin polarized electron beams and beams with phase aberrations are considered, as they pass through ferromagnetic FePt or antiferromagnetic LaMnAsO. The magnetic signals are obtained by comparing the intensity over a disk in the diffraction plane for beams with opposite angular momentum or aberrations. The strongest magnetic signals are obtained from vortex beams with large orbital angular momentum, where relative magnetic signals above $10^{-3}$ are indicated for $10\hbar$ orbital angular momentum, meaning that relative signals of one percent could be expected with the even larger orbital angular momenta, which have been produced in experimental setups. All results indicate that beams with low acceleration voltage and small convergence angles yield stronger magnetic signals, which is unfortunately problematic for the possibility of high spatial resolution imaging. Nevertheless, under atomic resolution conditions, relative magnetic signals in the order of $10^{-4}$ are demonstrated, corresponding to an increase with one order of magnitude compared to previous work.

The use of phase plates in the back focal plane of a microscope is a well established technique in optical microscopy to increase the contrast of weakly interacting samples and is gaining interest in electron microscopy as well. In this paper we study the spiral phase plate (SPP), also called helical, vortex, or two-dimensional Hilbert phase plate, that adds an angularly dependent phase of the form $e^{i\ell\phi}$ to the exit wave in Fourier space. In the limit of large collection angles, we analytically calculate that the average of a pair of $\ell=\pm1$ SPP images is directly proportional to the gradient squared of the exit wave, explaining the edge contrast previously seen in optical SPP work. The difference between a clockwise-anticlockwise pair of SPP images and conditions where this difference vanishes and the gradient of the exit wave can be seen from one single SPP image, are discussed. Finally, we demonstrate how with three images, one without and one with each of an $\ell=\pm1$ SPP, may give enough information to reconstruct both the amplitude and the phase of the exit wave. This work provides the theoretical background to interpret images obtained with a SPP and can help enable new experiments to study for example magnetic materials in an electron microscope., Comment: 7 pages, 4 figures

Electron vortex beams hold great promise for development in transmission electron microscopy, but have yet to be widely adopted. This is partly due to the complex set of interactions that occur between a beam carrying orbital angular momentum (OAM) and a sample. Herein, the system is simplified to focus on the interaction between geometrical symmetries, OAM and topology. We present multiple simulations, alongside experimental data to study the behaviour of a variety of electron vortex beams after interacting with apertures of different symmetries, and investigate the effect on their OAM and vortex structure, both in the far-field and under free-space propagation., Comment: 11 pages

Elastic scattering of electron vortex beams on magnetic materials leads to a weak magnetic contrast due to Zeeman interaction of orbital angular momentum of the beam with magnetic fields in the sample. The magnetic signal manifests itself as a redistribution of intensity in diffraction patterns due to a change of sign of the orbital angular moment. While in the atomic resolution regime the magnetic signal is most likely under the detection limits of present transmission electron microscopes, for electron probes with high orbital angular momenta, and correspondingly larger spatial extent, its detection is predicted to be feasible., Comment: 5 pages, 3 figures

The phase problem can be considered as one of the cornerstones of quantum mechanics intimately connected to the detection process and the uncertainty relation. The latter impose fundamental limits on the manifold phase reconstruction schemes invented to date in particular at small magnitudes of the quantum wave. Here, we show that a rigorous solution of the Transport of Intensity Reconstruction (TIE) scheme in terms of a linear elliptic partial differential equation for the phase provides reconstructions even in the presence of wave zeros if particular boundary conditions (BCs) are given. We furthermore discuss how partial coherence hampers phase reconstruction and show that a modified version of the TIE reconstructs the curl-free current density at arbitrary (in-)coherence. This opens the way for a large variety of new applications in fields as diverse as astrophysics, geophysics, photonics, acoustics, and electron microscopy, where zeros in the respective wave field are a ubiquitous feature., Comment: 5 pages, 3 figures, includes correction as in https://journals.aps.org/prl/abstract/10.1103/PhysRevLett.111.199902

We investigate topological aspects of sub-nm electron vortex beams upon elastic propagation through atomic scattering potentials. Two main aspects can be distinguished: (i) Significantly reduced delocalization compared to a similar non-vortex beam if the beam centers on an atomic column and (ii) site symmetry dependent splitting of higher-order vortex beams. Furthermore, the results provide insight into the complex vortex line fabric within the elastically scattered wave containing characteristic vortex loops predominantly attached to atomic columns and characteristic twists of vortex lines around atomic columns., Comment: 10 pages, 6 figures

We report on the development of Electron Holographic Tomography towards a versatile potential measurement technique, overcoming several limitations, such as a limited tilt range, previously hampering a reproducible and accurate electrostatic potential reconstruction in three dimensions. Most notably, tomographic reconstruction is performed on optimally sampled polar grids taking into account symmetry and other spatial constraints of the nanostructure. Furthermore, holographic tilt series acquisition and alignment have been automated and adapted to three dimensions. We demonstrate 6 nm spatial and 0.2 V signal resolution by reconstructing various, previously hidden, potential details of a GaAs/AlGaAs core-shell nanowire. The improved tomographic reconstruction opens pathways towards the detection of minute potentials in nanostructures and an increase in speed and accuracy in related techniques such as X-ray tomography.

In TEM, a typical goal consists of making a small electron probe in the sample plane in order to obtain high spatial resolution in scanning transmission electron microscopy. In order to do so, the phase of the electron wave is corrected to resemble a spherical wave compensating for aberrations in the magnetic lenses. In this contribution we discuss the advantage of changing the phase of an electron wave in a specific way in order to obtain fundamentally different electron probes opening up new application in the (S)TEM. We focus on electron vortex states as a specific family of waves with an azimuthal phase signature and discuss their properties, production and applications. The concepts presented here are rather general and also different classes of probes can be obtained in a similar fashion showing that electron probes can be tuned to optimise a specific measurement or interaction.

A model for a new electron vortex beam production method is proposed and experimentally demonstrated. The technique calls on the controlled manipulation of the degrees of freedom of the lens aberrations to achieve a helical phase front. These degrees of freedom are accessible by using the corrector lenses of a transmission electron microscope. The vortex beam is produced through a particular alignment of these lenses into a specifically designed astigmatic state and applying an annular aperture in the condensor plane. Experimental results are found to be in good agreement with simulations., Comment: 5 pages, 4 figures

We present a first-principles density functional study of the structural, electronic and magnetic properties of the ferroelectric domain walls in multiferroic BiFeO3. We find that domain walls in which the rotations of the oxygen octahedra do not change their phase when the polarization reorients are the most favorable, and of these the 109 degree domain wall centered around the BiO plane has the lowest energy. The 109 degree and 180 degree walls have a significant change in the component of their polarization perpendicular to the wall; the corresponding step in the electrostatic potential is consistent with a recent report of electrical conductivity at the domain walls. Finally, we show that changes in the Fe-O-Fe bond angles at the domain walls cause changes in the canting of the Fe magnetic moments which can enhance the local magnetization at the domain walls., Comment: 9 pages, 20 figures