Search

Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecular-level thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst–support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free high-performance and durable alkaline fuel cells and related technologies. This work was supported by the Center for Alkaline-Based Energy Solutions, an Energy Frontier Research Center program supported by the U.S. Department of Energy, under Grant DE-SC0019445. This work acknowledges the long-term support of TEM facilities at the Cornell Center for Materials Research (CCMR) which are supported through the National Science Foundation Materials Research Science and Engineering Center (NSF MRSEC) program (DMR1719875), and Cornell high-energy synchrotron sources (CHESS), which is supported by the National Science Foundation under Award DMR-1332208.

Cathodic corrosion represents an enigmatic electrochemical process in which metallic electrodes corrode under sufficiently reducing potentials. Although discovered by Fritz Haber in the 19th century, only recently has progress been made in beginning to understand the atomistic mechanisms of corroding bulk electrodes. The creation of nanoparticles as the end-product of the corrosion process suggests an additional length scale of complexity. Here, we studied the dynamic evolution of morphology, composition, and crystallographic structural information of nanocrystal corrosion products by analytical and four-dimensional electrochemical liquid-cell scanning transmission electron microscopy (EC-STEM). Our operando/in situ electron microscopy revealed, in real-time, at the nanometer scale, that cathodic corrosion yields significantly higher levels of structural degradation for heterogeneous nanocrystals than bulk electrodes. In particular, the cathodic corrosion of Au nanocubes on bulk Pt electrodes led to the unexpected formation of thermodynamically immiscible Au-Pt alloy nanoparticles. The highly kinetically driven corrosion process is evidenced by the successive anisotropic transition from stable Pt(111) bulk single-crystal surfaces evolving to energetically less-stable (100) and (110) steps. The motifs identified in this microscopy study of cathodic corrosion of nanocrystals are likely to underlie the structural evolution of nanoscale electrocatalysts during many electrochemical reactions under highly reducing potentials, such as CO

Alkaline anion exchange membranes (AAEMs) with high hydroxide conductivity and good alkaline stability are essential for the development of anion exchange membrane fuel cells to generate clean energy by converting renewable fuels to electricity. Polyethylene-based AAEMs with excellent properties can be prepared via sequential ring-opening metathesis polymerization (ROMP) and hydrogenation of cyclooctene derivatives. However, one of the major limitations of this approach is the complicated multi-step synthesis of functionalized cyclooctene monomers. Herein, we report that piperidinium-functionalized cyclooctene monomers can be easily prepared via the photocatalytic hydroamination of cyclooctadiene with piperidine in a one-pot, two-step process to produce high-performance AAEMs. Possible alkaline-degradation pathways of the resultant polymers were analyzed using spectroscopic analysis and dispersion-inclusive hybrid density functional theory (DFT) calculations. Quite interestingly, our theoretical calculations indicate that local backbone morphology—which can potentially change the Hofmann elimination reaction rate constant by more than four orders of magnitude—is another important consideration in the rational design of stable high-performance AAEMs., Piperidinium-functionalized polyethylene-based alkaline anion exchange membranes that show high hydroxide conductivities and good alkaline stabilities are easily prepared using photocatalytic hydroamination reactions.

By including a fraction of exact exchange (EXX), hybrid functionals reduce the self-interaction error in semilocal density functional theory (DFT) and thereby furnish a more accurate and reliable d...

TiO2 is a widely used photocatalyst in science and technology and its interface with water is important in fields ranging from geochemistry to biomedicine. Yet, it is still unclear whether water adsorbs in molecular or dissociated form on TiO2 even for the case of well-defined crystalline surfaces. To address this issue, we simulated the TiO2–water interface using molecular dynamics with an ab initio-based deep neural network potential. Our simulations show a dynamical equilibrium of molecular and dissociative adsorption of water on TiO2. Water dissociates through a solvent-assisted concerted proton transfer to form a pair of short-lived hydroxyl groups on the TiO2 surface. Molecular adsorption of water is ΔF = 8.0 ± 0.9 kJ mol−1 lower in free energy than the dissociative adsorption, giving rise to a 5.6 ± 0.5% equilibrium water dissociation fraction at room temperature. Due to the relevance of surface hydroxyl groups to the surface chemistry of TiO2, our model might be key to understanding phenomena ranging from surface functionalization to photocatalytic mechanisms., TiO2 is a widely used photocatalyst in science and technology and its interface with water is important in fields ranging from geochemistry to biomedicine.

A comprehensive microscopic understanding of ambient liquid water is a major challenge for $ab$ $initio$ simulations as it simultaneously requires an accurate quantum mechanical description of the underlying potential energy surface (PES) as well as extensive sampling of configuration space. Due to the presence of light atoms (e.g., H or D), nuclear quantum fluctuations lead to observable changes in the structural properties of liquid water (e.g., isotope effects), and therefore provide yet another challenge for $ab$ $initio$ approaches. In this work, we demonstrate that the combination of dispersion-inclusive hybrid density functional theory (DFT), the Feynman discretized path-integral (PI) approach, and machine learning (ML) constitutes a versatile $ab$ $initio$ based framework that enables extensive sampling of both thermal and nuclear quantum fluctuations on a quite accurate underlying PES. In particular, we employ the recently developed deep potential molecular dynamics (DPMD) model---a neural-network representation of the $ab$ $initio$ PES---in conjunction with a PI approach based on the generalized Langevin equation (PIGLET) to investigate how isotope effects influence the structural properties of ambient liquid H$_2$O and D$_2$O. Through a detailed analysis of the interference differential cross sections as well as several radial and angular distribution functions, we demonstrate that this approach can furnish a semi-quantitative prediction of these subtle isotope effects., Comment: 19 pages, 5 figures, and 1 table

In the previous paper of this series [JCTC 2020, 16, 3757], we presented a theoretical and algorithmic framework based on a localized representation of the occupied space that exploits the inherent sparsity in the real-space evaluation of the EXX interaction in finite-gap systems. This was accompanied by a detailed description of exx, a massively parallel hybrid MPI/OpenMP implementation of this approach in Quantum ESPRESSO that enables linear-scaling hybrid DFT based AIMD in the NVE/NVT ensembles of condensed-phase systems containing 500--1000 atoms (in fixed orthorhombic cells) with a wall time cost comparable to semi-local DFT. In this work, we extend exx to enable hybrid DFT based AIMD of large-scale condensed-phase systems with general and fluctuating cells in the NpH/NpT ensembles. Our theoretical extension includes an analytical derivation of the EXX contribution to the stress tensor for systems in general cells with a computational complexity that scales linearly with system size. The corresponding algorithmic extensions to exx include optimized routines that: (i) handle static/fluctuating cells with non-orthogonal lattice symmetries, (ii) solve Poisson's equation in general cells via an automated selection of the auxiliary grid directions in the Natan-Kronik representation of the discrete Laplacian operator, and (iii) evaluate the EXX contribution to the stress tensor. We also critically assess the computational performance of the extended exx module across several different HPC architectures via case studies on ice Ih, II, and III as well as ambient liquid water. We find that the extended exx can evaluate the EXX contribution to the stress tensor with negligible cost (< 1%) and remains highly scalable, thereby bringing us another step closer to routinely performing hybrid DFT based AIMD for large-scale condensed-phase systems across a wide range of thermodynamic conditions., 30 pages and 5 figures

In this work, we have explored the use of a third species during chemical vapor deposition (CVD) to direct thin-film growth to occur exclusively on one surface in the presence of another. Using a combination of density functional theory (DFT) calculations and experiments, including in situ surface analysis, we have examined the use of 4-octyne as a coadsorbate in the CVD of ZrO

By including a fraction of exact exchange (EXX), hybrid functionals reduce the self-interaction error in semilocal density functional theory (DFT) and thereby furnish a more accurate and reliable description of the underlying electronic structure in systems throughout biology, chemistry, physics, and materials science. However, the high computational cost associated with the evaluation of all required EXX quantities has limited the applicability of hybrid DFT in the treatment of large molecules and complex condensed-phase materials. To overcome this limitation, we describe a linear-scaling approach that utilizes a local representation of the occupied orbitals (e.g., maximally localized Wannier functions (MLWFs)) to exploit the sparsity in the real-space evaluation of the quantum mechanical exchange interaction in finite-gap systems. In this work, we present a detailed description of the theoretical and algorithmic advances required to perform MLWF-based

In this work, an investigation of supercritical water is presented combining inelastic and deep inelastic neutron scattering experiments and molecular dynamics simulations based on a machine-learned potential of ab initio quality. The local hydrogen dynamics is investigated at 250 bar and in the temperature range of 553-823 K, covering the evolution from subcritical liquid to supercritical gas-like water. The evolution of libration, bending, and stretching motions in the vibrational density of states is studied, analyzing the spectral features by a mode decomposition. Moreover, the hydrogen nuclear momentum distribution is measured, and its anisotropy is probed experimentally. It is shown that hydrogen bonds survive up to the higher temperatures investigated, and we discuss our results in the framework of the coupling between intramolecular modes and intermolecular librations. Results show that the local potential affecting hydrogen becomes less anisotropic within the molecular plane in the supercritical phase, and we attribute this result to the presence of more distorted hydrogen bonds.

The photocatalytic activity of TiO2 for water splitting has been known for decades, yet the adsorption structure and hydrogen bonding of water at the interface with TiO2 have remained controversial. We investigate the prototypical aqueous interface with anatase TiO2 (101) using ab initio molecular dynamics (AIMD) with the strongly constrained and appropriately normed (SCAN) density functional, recently shown to provide an excellent description of the properties of bulk liquid water. We find that water forms a stable bilayer of intact molecules with ice-like dynamics and enhanced dipole moment and polarizability on the anatase surface. The orientational order and H-bond environment of interfacial water are reflected in the computed sum frequency generation (SFG) spectrum, which agrees well with recent measurements in the OH stretching frequency range (3000–3600 cm–1). Additional AIMD simulations for a model interface with 66% of dissociated water in the contact layer show that surface hydroxyls disrupt the...

We carry out X-ray absorption spectroscopy experiment at oxygen K-edge in croconic acid (C5H2O5) crystal as a prototype of ferroelectric organic molecular solid, whose electric polarization is generated by proton transfer. The experimental spectrum is well reproduced by the electron-hole excitation theory simulations from configuration generated by ab initio molecular dynamics simulation. When inversion symmetry is broken in ferroelectric state, the hydrogen bonding environment on the two bonded molecules become inequivalent. Such a difference is sensitively probed by the bound excitation in the pre-edge, which are strongly localized on the excited molecules. Our analysis shows that a satellite peak in the pre-edge will emerge at higher excitation energy which serves as a clear signature of ferroelectricity in the material., Comment: 6 pages, 3 figures

The photocatalytic activity of TiO

We explore how anharmonicity, nuclear quantum effects (NQE), many-body dispersion interactions, and Pauli repulsion influence thermal properties of dispersion-bound molecular crystals. Accounting for anharmonicity with ab initio molecular dynamics yields cell parameters accurate to within $2%$ of experiment for a set of pyridinelike molecular crystals at finite temperatures and pressures. From the experimental thermal expansion curve, we find that pyridine-I has a Debye temperature just above its melting point, indicating sizable NQE across the entire crystalline range of stability. We find that NQE lead to a substantial volume increase in pyridine-I $(\ensuremath{\approx}40$% more than classical thermal expansion at 153 K) and attribute this to intermolecular Pauli repulsion promoted by intramolecular quantum fluctuations. When predicting delicate properties such as the thermal expansivity, we show that many-body dispersion interactions and more sophisticated density functional approximations improve the accuracy of the theoretical model.

We introduce a local order metric (LOM) that measures the degree of order in the neighborhood of an atomic or molecular site in a condensed medium. The LOM maximizes the overlap between the spatial distribution of sites belonging to that neighborhood and the corresponding distribution in a suitable reference system. The LOM takes a value tending to zero for completely disordered environments and tending to one for environments that perfectly match the reference. The site-averaged LOM and its standard deviation define two scalar order parameters, $S$ and $\ensuremath{\delta}S$, that characterize with excellent resolution crystals, liquids, and amorphous materials. We show with molecular dynamics simulations that $S$, $\ensuremath{\delta}S$, and the LOM provide very insightful information in the study of structural transformations, such as those occurring when ice spontaneously nucleates from supercooled water or when a supercooled water sample becomes amorphous upon progressive cooling.

We perform ab initio molecular dynamics (AIMD) simulation of liquid water in the canonical ensemble at ambient conditions using the strongly constrained and appropriately normed (SCAN) meta-generalized-gradient approximation (GGA) functional approximation and carry out systematic comparisons with the results obtained from the GGA-level Perdew-Burke-Ernzerhof (PBE) functional and Tkatchenko-Scheffler van der Waals (vdW) dispersion correction inclusive PBE functional. We analyze various properties of liquid water including radial distribution functions, oxygen-oxygen-oxygen triplet angular distribution, tetrahedrality, hydrogen bonds, diffusion coefficients, ring statistics, density of states, band gaps, and dipole moments. We find that the SCAN functional is generally more accurate than the other two functionals for liquid water by not only capturing the intermediate-range vdW interactions but also mitigating the overly strong hydrogen bonds prescribed in PBE simulations. We also compare the results of SCAN-based AIMD simulations in the canonical and isothermal-isobaric ensembles. Our results suggest that SCAN provides a reliable description for most structural, electronic, and dynamical properties in liquid water.

We have synthesized boron nitride nanotubes (BNNTs) in an arc in presence of boron and nitrogen species only, without transition metals. We find that BNNTs are often attached to pure boron nanoparticles, suggesting that root-growth is a likely mechanism for their formation. To gain further insight into this process we have studied key mechanisms for root growth of BNNTs on the surface of a liquid boron droplet by ab initio molecular dynamics simulations. We find that nitrogen atoms reside predominantly on the droplet surface where they organize to form boron nitride islands below 2400 K. To minimize contact with the liquid particle underneath, the islands assume non-planar configurations that are likely precursors for the thermal nucleation of cap structures. Once formed, the caps are stable and can easily incorporate nitrogen and boron atoms at their base, resulting in further growth. Our simulations support the root-growth mechanism of BNNTs and provide comprehensive evidence of the active role played by liquid boron., Comment: supporting inofrmation inlcuded

Quantum-mechanical calculations enable reliable computation of structures and stabilities for molecular crystal polymorphs., Reliable prediction of the polymorphic energy landscape of a molecular crystal would yield profound insight into drug development in terms of the existence and likelihood of late-appearing polymorphs. However, the computational prediction of molecular crystal polymorphs is highly challenging due to the high dimensionality of conformational and crystallographic space accompanied by the need for relative free energies to within 1 kJ/mol per molecule. In this study, we combine the most successful crystal structure sampling strategy with the most successful first-principles energy ranking strategy of the latest blind test of organic crystal structure prediction methods. Specifically, we present a hierarchical energy ranking approach intended for the refinement of relative stabilities in the final stage of a crystal structure prediction procedure. Such a combined approach provides excellent stability rankings for all studied systems and can be applied to molecular crystals of pharmaceutical importance.

Essential oils from leaves of Taiwan's indigenous cinnamon, Cinnamomum osmophloeum extracts (CEs), contain similar constituents to those of commercial cinnamons from dried barks of other Cinnamomum species. However, cinnamon bark extracts showed controversial in vitro and in vivo results in their antibacterial activities against H. pylori. Whether CEs inhibit H. pylori growth and inflammation of H. pylori-infected gastric epithelium is unknown. In this study, we used 4 h water distillation to obtain CEs, which comprised >95% trans-cinnamaldehyde and other 4 minor compounds that were confirmed by GC-MS and contained 1305.5 μg ml−1 of trans-cinnamaldehyde that was quantified by HPLC analysis. The minimal inhibitory concentration of trans-cinnamaldehyde in CEs against H. pylori was 40.8 μg ml−1 in 48 h co-cultures. We subsequently performed 2 cinnamon extract assays: 3 h treatment of CEs containing 6.3 μg ml−1 and 63 μg ml−1 of trans-cinnamaldehyde significantly inhibited IL-8 mRNA and protein expression in the 1 hour H. pylori-infected cells, whereas 6 h treatment of CEs containing 21 μg ml−1 of trans-cinnamaldehyde, but not CEs containing 10.5 μg ml−1 of trans-cinnamaldehyde, substantially downregulated IL-8 mRNA expression and these two CEs strongly suppressed IL-8 protein secretion in the 2 h H. pylori-infected cells. In the 2 h IL-1β-treated cells, both CEs and t-SSs containing 21 μg ml−1 and 10.5 μg ml−1 of trans-cinnamaldehyde for 6 h markedly downregulated IL-8 mRNA expression; CEs inhibited IL-8 protein production more potently than t-SSs when both contained the same concentration of trans-cinnamaldehyde at 21 μg ml−1. In conclusion, CEs concentration-dependently inhibit H. pylori growth and postinfectiously inhibit IL-8 mRNA and protein expression in H. pylori- and IL-1β-pretreated AGS cells. Moreover, CEs exhibited a stronger anti-inflammatory effect than trans-cinnamaldehyde, indicating that CEs can potentially be used to treat H. pylori infection.

Quantum ESPRESSO is an integrated suite of open-source computer codes for quantum simulations of materials using state-of-the art electronic-structure techniques, based on density-functional theory, density-functional perturbation theory, and many-body perturbation theory, within the plane-wave pseudo-potential and projector-augmented-wave approaches. Quantum ESPRESSO owes its popularity to the wide variety of properties and processes it allows to simulate, to its performance on an increasingly broad array of hardware architectures, and to a community of researchers that rely on its capabilities as a core open-source development platform to implement theirs ideas. In this paper we describe recent extensions and improvements, covering new methodologies and property calculators, improved parallelization, code modularization, and extended interoperability both within the distribution and with external software., Comment: Psi-k highlight September 2017: psi-k.net/dowlnload/highlights/Highlight_137.pdf; J. Phys.: Condens. Matter, accepted

Significance Water is vital to our everyday life, but its structure at a molecular level is still not fully understood from either experiment or theory. The latter is hampered by our inability to construct a purely predictive, first principles model. The difficulty in modeling water lies in capturing the delicate interplay among the many strong and weak forces that govern its behavior and phase diagram. Herein, molecular simulations with a recently proposed nonempirical quantum mechanical approach (the SCAN density functional) yield an excellent description of the structural, electronic, and dynamic properties of liquid water. SCAN (strongly constrained and appropriately normed)-based approaches, which describe diverse types of bonds in materials on an equal, accurate footing, will likely enable efficient and reliable modeling of aqueous phase chemistry.

Biological membranes are essential for cell life and hydration. Water provides the driving force for the assembly and stability of many cell components. Here, we study the structural properties of water in a phospholipid membrane. We characterize the local structures, inspecting the intermediate range order (IRO) and adopting a sensitive local order metric recently proposed by Martelli et al. that measures and grades the degree of overlap of the local environment with the structures of perfect ice. Close to the membrane, water acquires a high IRO and changes its dynamical properties; i.e., its translational and rotational degrees of freedom slow in a region that extends over ≃ 1 nm from the membrane interface. Surprisingly, we show that at distances as far as ≃ 2.5 nm from the interface, although the bulk-like dynamics are recovered, the IRO of water is still slightly higher than that in the bulk under the same thermodynamic conditions. Therefore, the water-membrane interface has a structural effect at ambient conditions that propagates further than the often-invoked 1-nm length scale. Consequently, this should be considered when analyzing experimental data of water confined by membranes and could help us to understand the role of water in biological systems.

The sixth blind test of organic crystal structure prediction (CSP) methods has been held, with five target systems: a small nearly rigid molecule, a polymorphic former drug candidate, a chloride salt hydrate, a co-crystal and a bulky flexible molecule. This blind test has seen substantial growth in the number of participants, with the broad range of prediction methods giving a unique insight into the state of the art in the field. Significant progress has been seen in treating flexible molecules, usage of hierarchical approaches to ranking structures, the application of density-functional approximations, and the establishment of new workflows and `best practices´ for performing CSP calculations. All of the targets, apart from a single potentially disordered Z?? = 2 polymorph of the drug candidate, were predicted by at least one submission. Despite many remaining challenges, it is clear that CSP methods are becoming more applicable to a wider range of real systems, including salts, hydrates and larger flexible molecules. The results also highlight the potential for CSP calculations to complement and augment experimental studies of organic solid forms. Fil: Reilly, Anthony M.. Cambridge Crystallographic Data Centre; Fil: Cooper, Richard I.. Chemistry Research Laboratory; Fil: Adjiman, Claire S.. Imperial College London; Reino Unido Fil: Bhattacharya, Saswata. Fritz Haber Institute Of The Max Planck Society; Fil: Boese, A. Daniel. Karl-franzens-universitat Graz; Austria Fil: Brandenburg, Jan Gerit. Colegio Universitario de Londres; Reino Unido. Universitat Bonn; Alemania Fil: Bygrave, Peter J.. University of Southampton; Reino Unido Fil: Bylsma, Rita. Radboud Universiteit Nijmegen; Países Bajos Fil: Campbell, Josh E.. University of Southampton; Reino Unido Fil: Car, Roberto. University of Princeton; Estados Unidos Fil: Case, David H.. University of Southampton; Reino Unido Fil: Chadha, Renu. University Institute Of Pharmaceutical Sciences India; India Fil: Cole, Jason C.. Cambridge Crystallographic Data Centre; Fil: Cosburn, Katherine. University of Tulane; Estados Unidos. University of Toronto; Canadá Fil: Cuppen, Herma M.. Radboud Universiteit Nijmegen; Países Bajos Fil: Curtis, Farren. University of Tulane; Estados Unidos. University of Carnegie Mellon; Estados Unidos Fil: Day, Graeme M.. University of Southampton; Reino Unido Fil: DiStasio, Robert A.. University of Princeton; Estados Unidos. Cornell University; Estados Unidos Fil: Dzyabchenko, Alexander. Karpov Institute Of Physical Chemistry; Fil: Van Eijck, Bouke P.. University of Utrecht; Países Bajos. Utrecht University; Países Bajos Fil: Elking, Dennis M.. Openeye Scientific Software, Inc; Fil: Van Den Ende, Joost A.. Radboud Universiteit Nijmegen; Países Bajos Fil: Facelli, Julio C.. University of Utah; Estados Unidos Fil: Ferraro, Marta B.. Universidad de Buenos Aires; Argentina Fil: Fusti-Molnar, Laszlo. Openeye Scientific Software, Inc; Fil: Gatsiou, Christina-Anna. Imperial College London; Reino Unido Fil: Gee, Thomas S.. University of Southampton; Reino Unido Fil: De Gelder, René. Radboud Universiteit Nijmegen; Países Bajos Fil: Ghiringhelli, Luca M.. Fritz Haber Institute Of The Max Planck Society; Fil: Goto, Hitoshi. Toyohashi University Of Technology; Fil: Grimme, Stefan. Universitat Bonn; Alemania Fil: Guo, Rui. Colegio Universitario de Londres; Reino Unido Fil: Hofmann, Detlef W. M.. Flexcryst; . Polaris; Fil: Hoja, Johannes. Fritz Haber Institute Of The Max Planck Society; Fil: Hylton, Rebecca K.. Colegio Universitario de Londres; Reino Unido Fil: Iuzzolino, Luca. Colegio Universitario de Londres; Reino Unido Fil: Jankiewicz, Wojciech. University Of Silesia In Katowice; Fil: De Jong, Daniël T.. Radboud Universiteit Nijmegen; Países Bajos Fil: Kendrick, John. University Of Bradford; Fil: De Klerk, Niek J. J.. Radboud Universiteit Nijmegen; Países Bajos Fil: Ko, Hsin-Yu. University of Princeton; Estados Unidos Fil: Kuleshova, Liudmila N.. Flexcryst; Fil: Li, Xiayue. University of Tulane; Estados Unidos. Argonne National Laboratory; Estados Unidos Fil: Lohani, Sanjaya. University of Tulane; Estados Unidos Fil: Leusen, Frank J. J.. University Of Bradford; Fil: Lund, Albert M.. University of Utah; Estados Unidos. Openeye Scientific Software, Inc; Fil: Lv, Jian. Jilin University; China Fil: Ma, Yanming. Jilin University; China Fil: Marom, Noa. University of Carnegie Mellon; Estados Unidos. University of Tulane; Estados Unidos Fil: Masunov, Artëm E.. University Of Central Florida; . National Research Nuclear University Mephi; Fil: McCabe, Patrick. Cambridge Crystallographic Data Centre; Fil: McMahon, David P.. University of Southampton; Reino Unido Fil: Meekes, Hugo. Radboud Universiteit Nijmegen; Países Bajos Fil: Metz, Michael P.. University Of Delaware; Fil: Misquitta, Alston J.. Queen Mary, University Of London; Fil: Mohamed, Sharmarke. Khalifa University Of Science And Technology; Fil: Monserrat, Bartomeu. Rutgers, The State University Of New Jersey; . University of Cambridge; Estados Unidos Fil: Needs, Richard J.. University of Cambridge; Estados Unidos Fil: Neumann, Marcus A.. No especifica; Fil: Nyman, Jonas. University of Southampton; Reino Unido Fil: Obata, Shigeaki. Toyohashi University Of Technology; Fil: Oberhofer, Harald. Universitat Technical Zu Munich; Alemania Fil: Oganov, Artem R.. Northwestern Polytechnical University; China. Skolkovo Institute Of Science And Technology; . Moscow Institute Of Physics And Technology; . Stony Brook University; Fil: Orendt, Anita M.. University of Utah; Estados Unidos Fil: Pagola, Gabriel Ignacio. Universidad de Buenos Aires; Argentina Fil: Pantelides, Constantinos C.. Imperial College London; Reino Unido Fil: Pickard, Chris J.. University of Cambridge; Estados Unidos. Colegio Universitario de Londres; Reino Unido Fil: Podeszwa, Rafal. University Of Silesia In Katowice; Fil: Price, Louise S.. Colegio Universitario de Londres; Reino Unido Fil: Price, Sarah L.. Colegio Universitario de Londres; Reino Unido Fil: Pulido, Angeles. University of Southampton; Reino Unido Fil: Read, Murray G.. Cambridge Crystallographic Data Centre; Fil: Reuter, Karsten. Universitat Technical Zu Munich; Alemania Fil: Schneider, Elia. University of New York; Estados Unidos Fil: Schober, Christoph. Universitat Technical Zu Munich; Alemania Fil: Shields, Gregory P.. Cambridge Crystallographic Data Centre; Fil: Singh, Pawanpreet. University Institute Of Pharmaceutical Sciences India; India Fil: Sugden, Isaac J.. Imperial College London; Reino Unido Fil: Szalewicz, Krzysztof. University Of Delaware; Fil: Taylor, Christopher R.. University of Southampton; Reino Unido Fil: Tkatchenko, Alexandre. University Of Luxembourg; . Fritz Haber Institute Of The Max Planck Society; Fil: Tuckerman, Mark E.. University of New York; Estados Unidos. New York University Shanghai; China. Courant Institute Of Mathematical Sciences; Fil: Vacarro, Francesca. University of Tulane; Estados Unidos. Loyola University New Orleans; Fil: Vasileiadis, Manolis. Imperial College London; Reino Unido Fil: Vazquez-Mayagoitia, Alvaro. Argonne National Laboratory; Estados Unidos Fil: Vogt, Leslie. University of New York; Estados Unidos Fil: Wang, Yanchao. Jilin University; China Fil: Watson, Rona E.. Colegio Universitario de Londres; Reino Unido Fil: De Wijs, Gilles A.. Radboud Universiteit Nijmegen; Países Bajos Fil: Yang, Jack. University of Southampton; Reino Unido Fil: Zhu, Qiang. Stony Brook University; Fil: Groom, Colin R.. Cambridge Crystallographic Data Centre

Metal string complexes or extended metal atom chains (EMACs) belong to a family of molecules that consist of a linear chain of directly bonded metal atoms embraced helically by four multidentate organic ligands. These four organic ligands are usually made up of repeating pyridyl units, single-nitrogen-substituted heterocyclic annulenes, bridged by independent amido groups. Here, in this paper, we show that these heterocyclic annulenes are actually nanoscale molecular split-ring resonators (SRRs) that can exhibit simultaneous negative electric permittivity and magnetic permeability in the UV-Vis region. Moreover, a monolayer of self-assembled EMACs is a periodic array of molecular SRRs which can be considered as a negative refractive index material. In the molecular scale, where the quantum-size effect is significant, we apply the tight-binding method to obtain the frequency-dependent permittivity and permeability of these molecular SRRs with their tensorial properties carefully considered., 8 pages, 8 figures