Search

The directional structure of a solution-derived bismuth aluminum gallium tin oxide film is achieved by a brush coating method. This structure is used for spontaneous and uniform liquid crystal alignment.

The present study substantiate that ultraviolet-nanoimprint lithography (UV-NIL) can be used to transfer a one-dimensional nano-pattern onto a high-k thin film of aluminum oxide mixed with a UV photocuring agent.

In this paper, a flexible liquid crystal display (LCD) is developed by applying hybrid alignment layers made of vanadium dioxide (VO2) nanoparticles and homeotropic-polyimide (h-PI) onto colorless ...

This paper introduces anisotropic nickel yttrium oxide (NYO) film formed by the brush coating technique. X-ray photoelectron spectroscopy confirmed well-formed NYO film after the curing process, and the morphology of the surface was investigated using atomic force microscopy. The shear stress driven from brush hair movements caused the nano/micro-grooved anisotropic surface structure of NYO. This anisotropic surface induced uniform liquid crystal (LC) alignment on the surface, which was confirmed by pre-tilt angle analysis and polarized optical microscopy. The contact angle measurements revealed an increase in hydrophilicity at higher temperature curing, which contributed to homogenous LC alignment. The NYO film achieved good optical transmittance and thermal stability as an LC alignment layer. In addition, the film demonstrated good electro-optical properties, stable switching, and significantly enhanced operating voltage performance in a twisted-nematic LC system. Therefore, we expect that this brush coating method can be applied to various inorganic materials to achieve an advanced LC alignment layer.

We propose an efficient alignment method for liquid crystals (LCs). A brush-coating method handles film deposition and LC alignment treatment simultaneously herein, meaning a reduction in the conventional alignment layer treatment process steps. A lanthanum yttrium strontium oxide (LaYSrO) film prepared by the sol–gel process was used for the alignment layer. Topographical details of the brush-coated LaYSrO films (compared with spin-coated films) were investigated by atomic force microscopy. Spin-coated LaYSrO meant that the film formation alone without orientation treatment represented an isotropic surface. On the other hand, the 270 °C-cured brush-coated LaYSrO showed nano/microstructure with directionality. It indicates that brush-hair sweeping induced shearing stress on the sol state of the LaYSrO, which results in surface anisotropy for LC alignment. The uniform LC alignment state was confirmed by polarized optical microscopy and pretilt analysis. The brush-coated LaYSrO shows fine optical transparency compared to plain and indium-tin-oxide coated glasses, and thermal stability up to 150 °C for LC alignment. Competitive electro-optical performances of the brush-coated LaYSrO were verified in a twisted-nematic LC system compared to those of the conventionally used polyimide layer. Consequently, we expect that the brush-coating process can be an innovative technology for LC alignment.

We carried out nanoimprinting lithography on solution-processed tin oxide (SnO) film for use as a liquid crystal (LC) alignment layer, for which we used a parallel configuration. To transfer the nanostructures onto the SnO film, we conducted an experiment according to curing, from which fine nanostructures on the SnO film were obtained at a curing temperature of 200 °C. These acted as a guide for the arrangement of the LC molecules and induced geometric restriction which minimized elastic distortion energies, and so the LC molecules could be aligned in the direction of the nanostructures. The LC alignment state was investigated using polarized optical microscopy, and the pre-tilt angle was measured using a crystal rotation method. With high thermal endurance and drastically low power consumption, the nano patterned SnO was shown to be a promising candidate for LC applications. The nanopatterning process combined with nanoimprinting lithography and solution-processed inorganic materials exhibited the possibility of broadening the features of nanostructure-mounted applications, including LC devices.

We propose a convenient brush coating method for liquid crystal (LC) alignment. This method enables film deposition and an alignment layer treatment process simultaneously. Aluminum bismuth gallium zinc oxide (AlBiGaZnO) is used as the alignment layer. After the curing process, a unidirectional AlBiGaZnO film is formed; its surface morphology and chemical composition were verified using scanning electron microscopy and X-ray photoelectron spectroscopy. This oriented structure of the surface was produced by shear-stress which originated from brush movement. That structure induced a surface anisotropic characteristic and resulted in a uniform LC alignment. The uniform and homogeneous LC alignment state on the film was confirmed using polarized optical microscopy and pre-tilt angle analysis. The brush coated AlBiGaZnO film exhibited excellent thermal budget for advanced LC system. The film exhibited enhanced electro-optical performance with a low operating voltage. These results demonstrate the potential of LC alignment technology via the brush coating method.

A styrene-butadiene-styrene (SBS) block copolymer was utilized to fabricate the wrinkle pattern in accordance with the buckling theory, and ion-beam (IB) irradiation was applied to induce surface r...

We investigated the wrinkle formation on ion-beam (IB)-irradiated substrates coated with the thermoplastic elastomer styrene-b-isoprene-b-styrene (SIS) and demonstrate a relation of the wrinkle str...

We present a simple and economically convenient method to fabricate nanopatterned ZnO films by imprinting lithography and use them for the layer alignment of liquid crystal (LC) displays. First, a one-dimensional nanopattern was obtained by laser interference lithography on a silicon wafer, and the silicon mold replica was transferred onto a flexible polydimethylsiloxane (PDMS) sheet for conformal patterning. The so-obtained PDMS mold was then applied on a ZnO film spin-coated on a glass substrate. During the imprinting process, the temperature was controlled from 100 to 250 °C to observe the transferring morphologies of the ZnO film; the nanopattern was successfully transferred at annealing temperatures of 200 and 250 °C because the ZnO film at the sol state filled the cavities of the PDMS nanopattern and solidified, forming a negative replica of the nanopattern. The direction of the nanopatterned ZnO film served as a guide for aligning the LC molecules on the LC surface at the centimeter scale and, due to their elastic characteristics and group behavior, propagating their directional states in the LC bulk. The resulting LC cell exhibited an enhanced electro-optical performance and high thermal endurance above 180 °C. The geometry of the alignment layer increased the electric field on the ZnO film and showed reduced threshold voltage. In addition, since flexible devices are generally based on polyimide, which imidized at around 200 °C, the relatively low annealing temperatures of our fabricated nanopatterned ZnO film allow it to be mounted on such devices without any deterioration of the underlying thermoplastic substrate. Therefore, nanopatterned ZnO has a considerable potential for advanced LC displays.

A hafnium strontium oxide (HfSrO) liquid crystal (LC) alignment film was efficiently created through brush coating, and its ability to change the LC alignment direction was confirmed. A brush was applied to HfSrO sol coated on an indium-tin oxide substrate, after which the coating was solidified at various curing temperatures. It was confirmed that a directional micro/nanostructure was formed above 280°C due to the shear stresses caused by the movement of the brush hairs. Surface chemical changes were analyzed by using X-ray photoelectron spectroscopy and contact angle measurements. As the curing temperature increased, the prevalence of oxygen bonds increased and the contact angle decreased, thereby increasing the surface energy. The anisotropic boundary of the microgrooves and the van der Waals forces due to an increase in surface energy changed the alignment direction of LC molecules from vertical to horizontal, as verified through polarized optical microscopy and pretilt angle measurements. Thus, the efficiency of the brush-coating method, which dramatically simplifies the LC alignment film process, was confirmed. The homeotropic/homogeneous LC alignment property of the HfSrO film produced through brush coating depending on the curing temperature provides an innovative approach for LC alignment.

The present study substantiate that ultraviolet-nanoimprint lithography (UV-NIL) can be used to transfer a one-dimensional nano-pattern onto a high-k thin film of aluminum oxide mixed with a UV photocuring agent. Polydimethylsiloxane (PDMS) molds fabricated on silicon wafers were made using deep ultraviolet laser interference lithography in order to investigate one-dimension nanopatterns. These imprinted nano-patterns induce geometric deformations in the liquid crystal (LC), creating collective and elastic properties, which act as a guide for homogeneous alignment. The nanoimprint method can process a large area, so it can be processed much easier, faster, and more accurately than the conventional rubbing method. Moreover, the optical properties of the nano-imprinted aluminum oxide (AlO) thin-film are about 1.5p% superior to that of conventional commercialized cells, so it has a high effect on the luminance and color gamut of the display. After pattern imprinting, atomic force microscope (AFM) was performed to confirm the result. We can compared the cycle of AlO mixed with UV photocuring agent PDMS pattern cycle, the period is 776 and 750 nm, the width is 468 and 450 nm, the spacing is 292 and 300 nm, and the height is 40 and 30 nm. The nano-imprinted film appears to replicate the width, amplitude, and spacing of the PDMS template. In addition, X-ray photoelectron spectroscopy was performed to determine the chemical properties of the thin film and it was confirmed that UV irradiation induces oxidation, thus increases the intensity significantly. The binding energies of Al 2p and C-O spectra were situated at 74.27 ± 0.5 eV and 531.78 ± 0.5 eV, respectively.

This study compressed the conventional two-step process of brush coating and orientation for liquid crystal (LC) alignment layer manufacturing into a one-step process. Surface modification and LC alignment were performed by brush coating with a tin oxide solution prepared via the solgel process at different curing temperatures. The effect of the curing temperature on atomic bonds was analyzed through x-ray photoelectron spectroscopy, the physical morphology of the film surface was characterized by scanning electron microscopy and atomic force microscopy, and the LC alignment of the brush-coated tin oxide film was verified via polarized optical microscopy and pretilt angle measurements. The shear stress generated during the brush coating process formed a partial groove structure; the resulting anisotropy aligned the LC molecules homogeneously. The brush-coated film showed excellent LC orientation properties, confirming the potential of the proposed and efficient fabrication process as a new orientation technology.

We demonstrated uniform LC alignment on IB-irradiated aluminium tin oxide (AlSnO) by controlling the annealing temperature. Physico-chemical analyses were carried out to determine the surfa...

The characteristics of ion beam (IB) irradiated polyethylene glycol (PEG) films were analyzed to determine their potential use as a liquid crystal (LC) alignment layer. The transmittance of...

We investigated the surface modification induced by the ion-beam (IB) irradiation of a polyethylene glycol (PEG) film and its liquid crystal (LC) alignment characteristics. The X-ray photoe...

Ultra-violet nanoimprint lithography was utilized to transfer a one-dimensional nano pattern onto a hydrophilic ultra-violet cured polymer surface for use in liquid crystal displays. A master mold with the one-dimensional nano pattern was initially constructed using laser interference lithography, which is a fast and maskless process that can be employed over a large area. The UV cured polymer showed a hydrophilic characteristic, and was used as a homogeneous alignment layer. The nano-patterned ultra-violet polymer successfully aligned the liquid crystal molecules without defects. Additionally, the liquid crystal cell was characterized by high thermal stability due to the high thermal endurance of UV cured polymer. Therefore, the proposed ultra-violet nanoimprint lithography technique is beneficial for advanced liquid crystal devices with high brightness and resolution with numerous switching components that require a high thermal cost.

A uniform unidirectional nanostructure composed of aluminum tin oxide and ultraviolet (UV)-curable polymer is introduced herein. The nanostructure was produced by UV-nanoimprint lithography (UV-NIL), and the fabricated hybrid film was used as a uniform liquid crystal (LC) alignment layer. Atomic force microscopy and line profile analysis were performed to confirm a well-ordered nanostructure with 760 nm periodicity and 30 nm height. X-ray photoelectron spectroscopy analysis was also conducted to examine the chemical modifications to the hybrid film surface during UV exposure. Optical transmittance investigation of the nanopatterned hybrid film revealed its compatibility for LC device application. Stable, uniform, and homogeneous LC alignment on the hybrid film was confirmed by polarized optical microscopy observance and analysis of LC pretilt angle. The unidirectional structure on the film surface enabled uniform LC orientation along with surface anisotropy property. Hence, we expect that the proposed UV-NIL process can be applied to fabricate high-resolution unidirectional nanostructures with various inorganic/organic hybrid materials and that these nanostructures have high potential for next-generation LC systems.

We investigated the wrinkle formation on ion-beam (IB)-irradiated substrates coated with the thermoplastic elastomer styrene

We studied the change of the surface and liquid crystal (LC) alignment characteristics of Polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene-graft-maleic anhydride (SEBS-g-MA) film according to ion beam (IB) irradiation. Atomic force microscopy (AFM) analysis revealed that IB irradiation reduces peaks and creates a wrinkled structure. X-ray photoelectron spectroscopy (XPS) analysis revealed that IB irradiation disintegrates the C–C bonds and makes C–O bonds, creating a dipole-dipole interaction, which improves the LC alignment characteristics. Through polarized optical microscopy (POM) analysis, it was found that the best LC alignment characteristics can be obtained after 120 s of IB irradiation. It was found that the anisotropy caused by the ion beam contributed more to the liquid crystal alignment in homogeneous direction than the one caused by the wrinkle structure.

We report uniform liquid crystal (LC) alignment on a polyacrylamide (PAM) film via ion beam (IB) treatment. The IB incidence angle is adjusted from 15° to 75°. Physicochemical modifications caused by the IB process are investigated by atomic force microscopy and x-ray photoelectron spectroscopy. Low IB incidence results in biased and bumpy surfaces, whereas high IB incidence forms isotropic and smooth surfaces; both of these are unsuitable for uniform LC alignment. The 45° IB incidence induces anisotropic surface chemical reformations, and these modifications induce van der Waals forces between the LCs and modified PAM, thereby leading to uniform LC alignment. The LC alignment state is verified by polarized optical microscopy and pretilt angle. The electro-optical characteristic of the modified PAM showed excellent switching performance in twisted-nematic LC system. Thus, the IB-treated PAM film is a good candidate for LC alignment layers and suitable for LC device applications.