Search

A pre-treatment process was evaluated in this work for wastewater from paper recycling using microwave technology followed by rapid precipitation of contaminants through centrifugation. Artificial neural networks (ANNs) were used to analyze and optimize the turbidity values. Thirty experimental runs were utilized including microwave (MW) power, duration, centrifuge time, and centrifuge speed as input variables, generated by the Central Composite Full Design (CCFD) approach. The experimental turbidity ranged from 8.1 to 19.7 NTU, while predicted values ranged from 8.4 to 19.7 NTU by ANN. The ANN model showed a robust prediction performance with low mean squared error values during training and testing. Moreover, high R² values showed a remarkable agreement between the experimental observations and ANN predictions. The results obtained from the input values (A:150.00, B:60.00, C:15.00, D:30.00) of sample 2, which gave the lowest turbidity value, showed the most removal of pollution. The results obtained from the input values (A:250.00, B:60.00, C:7.00, D:20.00) of sample 30, which gave the highest turbidity value, showed the least removal of pollution. The results showed that increasing RPM and time of the centrifugation process significantly affected the removal of pollution in wastewater. [ABSTRACT FROM AUTHOR]

This work reports the degradation of cellulosic material, i.e., paper, under different environmental conditions (soil and hydrolytic). Models were developed using central composite design (CCD) within the framework of response surface methodology (RSM) and artificial neural network (ANN) techniques. It is done as part of a solid waste management system to eliminate the waste produced by excessive paper usage and obtain optimized degradation conditions of paper. In view of the real environments where paper-based solid wastes are usually exposed, soil degradation and hydrolytic degradation of paper were investigated. The factors pH (4–10), compost ratio (2–5), CaCl2 (5–15 ppm), and time (7–20 days) were independent factors that varied for the study, and degradation conversion was measured as the dependent variable for soil degradation of paper. The factors pH (4–10), CaCl2 (2–5 ppm), tripotassium phosphate (TPP, 2–5 ppm), and time (6–16 days) were independent variables that varied for the study, and degradation conversion was the dependent variable for hydrolytic degradation of paper. The optimal conditions for soil degradation were determined to be a pH of 4, a compost ratio of 5, a salt (CaCl2) addition of 5 ppm, and a duration of 20 days, resulting in the highest observed conversion rate. The coefficient of regression (R2) for CCD is 87.24%, whereas it is 94.82% for ANN. The optimal conditions for achieving maximum conversion in hydrolytic degradation include a pH of 10, a CaCl2 salt concentration of 5 ppm, a TPP salt concentration of 2 ppm, and a duration of 16 days. The coefficient of regression for CCD is 75.15%, while the coefficient of regression for ANN is 93.91%. In both deterioration scenarios, the data exhibited a higher degree of fit when modeled using ANN compared to CCD (RSM). [ABSTRACT FROM AUTHOR]

Geotechnical designs and analyses of earth structures and foundations exclusively involve the assessment and consideration of unsaturated soil shear strength. The laboratory testing equipment and methods for predicting the unsaturated soil shear strength are complicated and more expensive. The experimental program attempted to involve undrained triaxial and filter paper for evaluating the unsaturated soil shear strength of identically compacted clayey soil. This study undertakes a comparison of shear strength in clayey soil under undrained loads, examining both saturated and unsaturated conditions. A 60 kPa air entry suction value is the key point at which linearity between the unsaturated shear strength parameter Øb and effective friction Ø′ with 15° linear slopes turns to non-linearity. Unsaturated shear strength increased by 22.76% in optimally wet conditions, 52.68% in optimum conditions, and 77.81% in optimally dry conditions as compared to saturated shear strength. This study utilizes an artificial neural network (ANN) to predict clayey soil's unsaturated shear strength, finding that the optimal ANN configuration (2-5-1 topology, Levenberg–Marquard optimization, and logsig transfer function) achieved high reliability with a correlation coefficient (R) of 0.9289 and mean square error values of 2.22, 7.12, and 3.012 for training, testing, and validation, respectively. This experimental investigation improves our understanding of clayey soil shear strength and emphasizes the importance of saturation and moisture content in geotechnical assessments under undrained loading conditions. [ABSTRACT FROM AUTHOR]

The pulp and paper industry is critical to global industrial and economic development. Recently, India's pulp and paper industries have been facing severe competitive challenges. The challenges have impaired the environmental performance and resulted in the closure of several operations. Assessment and prediction of the performance of the Indian pulp and paper industry using various parameters is a critical task for researchers. This study proposes a framework for performance assessment and prediction based on Data Envelopment Analysis (DEA), Artificial Neural Networks, and Deep Learning (DL) to assist industry administration and decision-making. We presented a case study based on eight industries to demonstrate the methodology's applicability. This study analyses and predicts industry performance based on sample data observations over 30 years. The result suggests the DEA-DL-based efficiency prediction has an overall MSE of 0.08 compared with the actual efficiency. Furthermore, the efficiency rankings are compared between the three techniques. The results suggest that the integrated DEA-DL method is primarily accurate in most scenarios with the actual values. The findings of this study provide a comprehensive analysis of environmental performance for policymakers. [ABSTRACT FROM AUTHOR]

In this era of knowledge, academic researchers are growing every day, this also spikes a growth in published literature on the new innovations and findings. This leads to a problem where the reviewers at the conferences must go through many research papers to determine whether they are suitable for the conference or not. This problem has caused the necessity of an effective paper screening tool for optimizing the literature review process. This research presents a development of a new Paper Screening Tool (PST) aimed at increasing the efficiency and accuracy of the literature screening phase. Leveraging the NPL processing techniques this PST and reduces a lot of manual efforts. Through comprehensive evaluation using a diverse dataset, the tools provide high precision. The PST also has user friendly interfaces and customizable report generation which empowers the researchers screening process to their specific needs. This paper contributes to literature by solving the challenge of information overloading during the literature review. [ABSTRACT FROM AUTHOR]

Background: In low-middle income countries, healthcare providers primarily use paper health records for capturing data. Paper health records are utilized predominately due to the prohibitive cost of acquisition and maintenance of automated data capture devices and electronic medical records. Data recorded on paper health records is not easily accessible in a digital format to healthcare providers. The lack of real time accessible digital data limits healthcare providers, researchers, and quality improvement champions to leverage data to improve patient outcomes. In this project, we demonstrate the novel use of computer vision software to digitize handwritten intraoperative data elements from smartphone photographs of paper anesthesia charts from the University Teaching Hospital of Kigali. We specifically report our approach to digitize checkbox data, symbol-denoted systolic and diastolic blood pressure, and physiological data. Methods: We implemented approaches for removing perspective distortions from smartphone photographs, removing shadows, and improving image readability through morphological operations. YOLOv8 models were used to deconstruct the anesthesia paper chart into specific data sections. Handwritten blood pressure symbols and physiological data were identified, and values were assigned using deep neural networks. Our work builds upon the contributions of previous research by improving upon their methods, updating the deep learning models to newer architectures, as well as consolidating them into a single piece of software. Results: The model for extracting the sections of the anesthesia paper chart achieved an average box precision of 0.99, an average box recall of 0.99, and an mAP0.5-95 of 0.97. Our software digitizes checkbox data with greater than 99% accuracy and digitizes blood pressure data with a mean average error of 1.0 and 1.36 mmHg for systolic and diastolic blood pressure respectively. Overall accuracy for physiological data which includes oxygen saturation, inspired oxygen concentration and end tidal carbon dioxide concentration was 85.2%. Conclusions: We demonstrate that under normal photography conditions we can digitize checkbox, blood pressure and physiological data to within human accuracy when provided legible handwriting. Our contributions provide improved access to digital data to healthcare practitioners in low-middle income countries. [ABSTRACT FROM AUTHOR]

It is difficult to predict index values or stock prices with a single financial formula. They are affected by many factors, such as political conditions, global economy, unexpected events, market anomalies, and the characteristics of the relevant companies, and many computer science techniques are being used to make more accurate predictions about them. This study aimed to predict the values of the XKAGT index by using the monthly closing values of the Borsa Istanbul (BIST) Forestry, Paper and Printing (XKAGT) index between 2002 and 2023, and the machine learning techniques artificial neural networks (ANN), random forest (RF), k-nearest neighbor (KNN), and gradient boosting machine (GBM). Furthermore, the performances of four machine learning techniques were compared. Factors affecting stock prices are generally classified as macroeconomic and microeconomic factors. As a result of examining the studies on determining the macroeconomic factors affecting the stock markets, 10 macroeconomic factors were determined as input. The macroeconomic variables used were crude oil price, exchange rate of USD/TRY, dollar index, BIST100 index, gold price, money supply (M2), S&P 500 index, US 10-year bond interest, export-import coverage rate in the forest products sector, and deposits interest rate. It was determined that all machine learning techniques used in the study performed successfully in predicting the index value, but the k-nearest neighbor algorithm showed the best performance with R2=0.996, RMSE=71.36, and a MAE of 40.8. Therefore, in line with the current variables, investors can make analyzes using any of the ANN, RF, KNN, and GBM techniques to predict the future index value, which will lead them to accurate results. [ABSTRACT FROM AUTHOR]

The Journal of Chemical Physics has released a special issue focused on software for atomistic machine learning. This issue aims to address the lack of journals dedicated to publishing scientific software papers. The collection of papers in this issue provides insight into the tools and goals of software implementations in the field of atomistic machine learning. The articles cover a range of topics, including machine-learning interatomic potentials, sampling, dataset repositories, workflows, and auxiliary tooling and analysis. The article concludes by emphasizing the importance of software implementations in the field and encourages further submissions on relevant topics. [Extracted from the article]

Defect detection is crucial in ensuring the quality of steel products. This paper proposes a novel deep neural network, cascaded adaptive global location network (CAGLNet), for detecting steel surface defects. The main objective of this study is to address the challenges associated with the irregular shape and dense spatial distribution of defects on steel. To achieve this goal, CAGLNet integrates a feature extraction network that combines residual and feature pyramid networks, a cascade adaptive tree-structure region proposal network (CAT-RPN) that eliminates the need for prior knowledge, and a global localisation regression for steel defect detection. This paper evaluates the effectiveness of CAGLNet on the NEU-DET dataset and demonstrates that the proposed model achieves an average accuracy of 85.40% with a fast frames per second of 10.06, outperforming those state-of-the-art methods. These results suggest that CAGLNet has the potential to significantly improve the effectiveness of defect detection in industrial production processes, leading to increased production yield and cost savings. Abbreviations: AT-RPN, adaptive tree-structure region proposal network; CAGLNet, cascaded adaptive global location network; CAT-RPN, cascade adaptive tree-structure region proposal network; CNN, convolutional neural network; DNN, deep neural network; EPNet, edge proposal network; FPN, feature pyramid network; FCOS, fully convolutional one-stage detector; FPS, frames per second; GMM, Gaussian mixture model; IoU, intersection-over-union; ROIAlign, region of interest align; RPN, region proposal network; ResNet, residual network; ResNet50_FPN, residual network and feature pyramid network; SABL, side aware boundary localisation; SSD, single-shot multiBox detector; TPE, Tree-structured Parzen estimator [ABSTRACT FROM AUTHOR]

Avoiding financial losses requires preventing catastrophic oil‐filled power transformer breakdowns. Continuous online transformer monitoring is needed. The authors use paper insulation to evaluate transformer health for continuous online transformer monitoring. The study suggests a new artificial intelligence method for estimating paper insulation residual life in oil‐immersed power transformers. The four artificial intelligence models use backpropagation‐based neural networks to predict paper insulation lifespan. Four primary transformer insulating paper failure indices—degree of polymerisation, 2‐furfuraldehyde, carbon monoxide, and carbon dioxide—form the basis of these models. Each model, including the backpropagation‐based neural networks, estimates paper insulation life using one failure index, along with moisture and temperature data. Optimisation techniques enhance hidden layer neurons and epoch count for improved performance. Results are validated against literature‐based life models, establishing a precise input–output correlation. This method accurately predicts the remaining useable life of power transformer paper insulation, enabling utilities to take proactive measures for safe and efficient transformer operation. [ABSTRACT FROM AUTHOR]

This article discusses a special issue of the journal Applied Sciences that focuses on the International Conference Wood Science and Engineering (ICWSE) held in November 2023. The conference covered various topics related to wood, including wood structure and properties, wood constructions, wood drying and heat treatments, conservation and restoration of wooden objects, wood-based materials, mechanical wood processing, and surface quality. The articles in the special issue explore different aspects of these topics, such as the characteristics and potential uses of different wood species, innovative wood construction techniques, optimal drying conditions for specific wood species, and the production and properties of wood-based materials. The research presented aims to promote the production of high-value wood products and contribute to the preservation of cultural heritage. The text provides a summary of various research papers related to wood science and engineering, covering topics such as the utilization potential of different tree species, wood material properties, wood preservation and coating techniques, and furniture design. The research findings highlight the importance of factors such as printing parameters, surface quality, adhesion of varnish coatings, and light-induced color changes in wood. The authors hope that these studies contribute to a better understanding of the scientific potential of wood and will be a starting point for further research in the field. [Extracted from the article]

The purpose of this study is to investigate whether there are differences in handwritten Chinese signatures on different media including paper and electronic devices. Participants were asked to sign specified names on various types of media and the signatures were scanned or saved digitally for subsequent analysis. In this study, using convolutional neural networks and Siamese neural networks as classifiers and comparators, the performance plunge is revealed and thus considerable dissimilarity between the signatures on different media is implied. To further explore this, cubic Bézier curves are fitted to the signatures using the least square method for quantitative statistical analysis. By analyzing the visual changes in the morphology of strokes, several features of signatures are selected and computed, and the paired t‐test and the Wilcoxon signed‐rank test are implemented, which provides a deeper substantiation and explanation of the findings. [ABSTRACT FROM AUTHOR]

This document is a summary of a special issue of the journal Sensors, titled "Emerging AI+X-Based Sensor and Networking Technologies including Selected Papers from ICGHIT 2022–2023." The special issue features selected papers from the 10th and 11th International Conferences on Green and Human Information Technology (ICGHITs), which were held in Korea and Thailand. The conferences focused on the theme of "Emerging Artificial Intelligent (AI)+X technology" and "Hyper Automation + Human AI" respectively. The selected papers cover various topics such as network security, routing protocols, signal detection, and clustering mechanisms, all incorporating AI-based methods. The issue also includes papers on topics like secure authentication, distance estimation in RFID systems, energy optimization in smart homes, blockchain technology, and radar signal detection. The authors emphasize the importance of both technology and humanity in advancing green and information technologies. [Extracted from the article]

The drilling quality of carbon fibre reinforced polymer (CFRP) components is a key factor affecting the service life of the components, while energy saving and emission reduction in industrial production are crucial. In this study, drilling experiments were conducted on T300 plywood using a 55° coated tungsten steel drill bit, and CNN-LSTM neural network models were used to construct mapping relationships between process parameters (spindle speed, feed rate, and fibre lay-up sequence) and delamination factor and machine energy consumption. A new method of predicting the delamination factor by process parameters is proposed, and explored the optimal process parameter combinations that reduce the energy consumption of machine tools and minimise the delamination factor at the same time. The research results show that within the parameter settings, a spindle speed of 7000 r/min, a feed rate of 40 mm/min, and a lay-up sequence of [0°, 0°, −45°, 90°]6s ensure both low power consumption in the drilling process and the highest possible hole quality. This paper clearly demonstrates the feasibility of achieving low-power, high-quality drilling of CFRP through parameter optimisation, providing guidance to the manufacturing industry to improve the quality of CFRP hole-making while easing the pressure on carbon emissions. [ABSTRACT FROM AUTHOR]

Many stray animals throughout the world unfortunately do not get the opportunity to find the loving home that they deserve. In this classification task, we look to develop an algorithm to predict the speed of pet adoptions. The input to our algorithm includes animal type (dog or cat), breed, gender, colour, profile picture online and the descriptions about the pet, etc. We then use both traditional machine learning techniques (Logistic Regression, Naive Bayes, SVM, Decision Tree, Random Forest and Gradient Boosting) and neural networks (fully connected neural networks and long short-term memory Model) to predict the adoption rate. In particular, we build feature vectors using information extracted from description scripts and feed them into neural network models. We are hoping to examine the results to develop strategies to help improve the overall adoption rate (i.e. what features lead to faster adoption). Every year, 3.3 million canines visit animal shelters, out of a total population of 200 million. Only 2% to 17% of pets are returned to their owners. The remaining animals are euthanized due to a shortage of room in shelters (killed). The present procedures for adapting or finding a pet are inefficient and haphazard. People disseminated leaflets to the general public and spread the word to others in the vicinity of the pet's disappearance. When individuals print fliers, they waste paper and money since there is no good impact. People also share their tales on social media sites like Instagram and Facebook. There are also several fraudsters who attempt to fraudulently claim the incentive for returning the pet to its legitimate owner. We want to provide an analysis on how fast pets(cats and dogs) can be adopted based on various factors like their health conditions, age, colour, breed etc. [ABSTRACT FROM AUTHOR]

A low‐temperature technology for fabricating thin‐film transistors (TFTs) is essential for the realization of electronic systems on flexible substrates. Presently reviewed are improved techniques for forming the source/drain regions and reducing the population of channel defects in a metal‐oxide TFT. These have been applied to the construction of different TFT structures, including ones with bottom gate, top gate, and dual gates. The utility of the improved 300‐°C technology has been demonstrated by the realization of a variety of electronic systems, such as a gate‐driver on array for active‐matrix displays, an analog front‐end for acquiring biopotential signals, and an artificial neural network for neuromorphic computing. [ABSTRACT FROM AUTHOR]

With the establishment of the "double carbon" goal, various industries are actively exploring ways to reduce carbon emissions. Cloud data centers, represented by cloud computing, often have the problem of mismatch between load requests and resource supply, resulting in excessive carbon emissions. Based on this, this paper proposes a complete method for cloud computing carbon emission prediction. Firstly, the convolutional neural network and bidirectional long-term and short-term memory neural network (CNN-BiLSTM) combined model are used to predict the cloud computing load. The real-time prediction power is obtained by real-time prediction load of cloud computing, and then the carbon emission prediction is obtained by power calculation. Develop a dynamic server carbon emission prediction model, so that the server carbon emission can change with the change of CPU utilization, so as to achieve the purpose of low carbon emission reduction. In this paper, Google cluster data is used to predict the load. The experimental results show that the CNN-BiLSTM combined model has good prediction effect. Compared with the multi-layer feed forward neural network model (BP), long short-term memory network model (LSTM), bidirectional long short-term memory network model (BiLSTM), modal decomposition and convolution long time series neural network model (CEEMDAN-ConvLSTM), the MSE index decreased by 52 % , 50 % , 34 % and 45 % respectively. [ABSTRACT FROM AUTHOR]

Establishing an accurate and robust feature fusion mechanism is key to enhancing the tracking performance of single-object trackers based on a Siamese network. However, the output features of the depth-wise cross-correlation feature fusion module in fully convolutional trackers based on Siamese networks cannot establish global dependencies on the feature maps of a search area. This paper proposes a dynamic cascade feature fusion (DCFF) module by introducing a local feature guidance (LFG) module and dynamic attention modules (DAMs) after the depth-wise cross-correlation module to enhance the global dependency modeling capability during the feature fusion process. In this paper, a set of verification experiments is designed to investigate whether establishing global dependencies for the features output by the depth-wise cross-correlation operation can significantly improve the performance of fully convolutional trackers based on a Siamese network, providing experimental support for rational design of the structure of a dynamic cascade feature fusion module. Secondly, we integrate the dynamic cascade feature fusion module into the tracking framework based on a Siamese network, propose SiamDCFF, and evaluate it using public datasets. Compared with the baseline model, SiamDCFF demonstrated significant improvements. [ABSTRACT FROM AUTHOR]

Due to the diversity and unpredictability of changes in malicious code, studying the traceability of variant families remains challenging. In this paper, we propose a GAN-EfficientNetV2-based method for tracing families of malicious code variants. This method leverages the similarity in layouts and textures between images of malicious code variants from the same source and their original family of malicious code images. The method includes a lightweight classifier and a simulator. The classifier utilizes the enhanced EfficientNetV2 to categorize malicious code images and can be easily deployed on mobile, embedded, and other devices. The simulator utilizes an enhanced generative adversarial network to simulate different variants of malicious code and generates datasets to validate the model's performance. This process helps identify model vulnerabilities and security risks, facilitating model enhancement and development. The classifier achieves 98.61% and 97.59% accuracy on the MMCC dataset and Malevis dataset, respectively. The simulator's generated image of malicious code variants has an FID value of 155.44 and an IS value of 1.72 ± 0.42. The classifier's accuracy for tracing the family of malicious code variants is as high as 90.29%, surpassing that of mainstream neural network models. This meets the current demand for high generalization and anti-obfuscation abilities in malicious code classification models due to the rapid evolution of malicious code. [ABSTRACT FROM AUTHOR]

This document provides summaries of research papers on the topic of Wordle, a popular puzzle game. The papers discuss various models and prediction frameworks used to analyze and improve the game. They explore factors such as word attributes, difficulty levels, and player behavior. The findings suggest that certain word attributes have an impact on the game's outcomes and difficulty. The models developed in these studies offer insights for game operators and suggestions for enhancing the game's popularity. [Extracted from the article]

Monitoring the early age strength and hardening of concrete plays a crucial role in ensuring the structural integrity and durability of concrete structures. Ultrasonic guided waves have emerged as a promising nondestructive testing technique for assessing concrete properties. This review paper aims to provide an overview of the utilization of ultrasonic guided waves for the early age assessment of concrete strength and hardening. The paper begins by discussing the fundamental principles of ultrasonic guided waves and their interaction with concrete materials. It highlights the advantages of using guided waves, such as their ability to propagate over long distances and penetrate through concrete structures. The review then explores various techniques employed for generating and detecting guided waves, including piezoelectric transducers, air-coupled transducers, and laser-ultrasonics. Furthermore, the paper presents a comprehensive analysis of the different parameters that can be extracted from ultrasonic signals to assess the early age strength and hardening of concrete. These parameters include wave velocity, attenuation, reflection, and scattering characteristics. The influence of various factors, such as moisture content, temperature, and mixture proportions, on the ultrasonic response of concrete is also discussed. Moreover, the review discusses the challenges and limitations associated with the application of ultrasonic guided waves in early age concrete assessment. It addresses issues such as signal interpretation, wave dispersion, and the presence of air voids. Additionally, recent advancements in signal processing techniques and data interpretation methods are highlighted. In conclusion, the utilization of ultrasonic guided waves for the early age assessment of concrete strength and hardening shows great promise. This review paper provides valuable insights into the current state-of-the-art in this field and offers recommendations for future research directions. [ABSTRACT FROM AUTHOR]

This document is a summary of a special issue on advanced machine learning and deep learning techniques for remote sensing. The issue includes 16 research papers that cover a range of topics, including hyperspectral image classification, moving point target detection, radar echo extrapolation, and remote sensing object detection. Each paper introduces a novel approach or model and provides extensive testing and evaluation to demonstrate its effectiveness. The insights shared in this special issue are expected to contribute to future advancements in artificial intelligence-based remote sensing research. [Extracted from the article]

For the past few years, sweat analysis for health monitoring has attracted increasing attention benefiting from wearable technology. In related research, the sensitive detection of uric acid (UA) in sweat with complex composition based on surface-enhanced Raman spectroscopy (SERS) for the diagnosis of gout is still a significant challenge. Herein, we report a visualized and intelligent wearable sweat platform for SERS detection of UA in sweat. In this wearable platform, the spiral channel consisted of colorimetric paper with Ag nanowires (AgNWs) that could capture sweat for SERS measurement. With the help of photos from a smartphone, the pH value and volume of sweat could be quantified intelligently based on the image recognition technique. To diagnose gout, SERS spectra of human sweat with UA are collected in this wearable intelligent platform and analyzed by artificial intelligence (AI) algorithms. The results indicate that the artificial neural network (ANN) algorithm exhibits good identification of gout with high accuracy at 97%. Our work demonstrates that SERS-AI in a wearable intelligent sweat platform could be a feasible strategy for diagnosis of gout, which expands research on sweat analysis for comfortable and noninvasive health monitoring. [ABSTRACT FROM AUTHOR]

One key frontier of artificial intelligence (AI) is the ability to comprehend research articles and validate their findings, posing a magnanimous problem for AI systems to compete with human intelligence and intuition. As a benchmark of research validation, the existing peer-review system still stands strong despite being criticized at times by many. However, the paper vetting system has been severely strained due to an influx of research paper submissions and increased conferences/journals. As a result, problems, including having insufficient reviewers, finding the right experts, and maintaining review quality, are steadily and strongly surfacing. To ease the workload of the stakeholders associated with the peer-review process, we probed into what an AI-powered review system would look like. In this work, we leverage the interaction between the paper's full text and the corresponding peer-review text to predict the overall recommendation score and final decision. We do not envisage AI reviewing papers in the near future. Still, we intend to explore the possibility of a human–AI collaboration in the decision-making process to make the current system FAIR. The idea is to have an assistive decision-making tool for the chairs/editors to help them with an additional layer of confidence, especially with borderline and contrastive reviews. We use a deep attention network between the review text and paper to learn the interactions and predict the overall recommendation score and final decision. We also use sentiment information encoded within peer-review texts to guide the outcome further. Our proposed model outperforms the recent state-of-the-art competitive baselines. We release the code of our implementation here: https://github.com/PrabhatkrBharti/PEERRec.git. [ABSTRACT FROM AUTHOR]

O-Vanillin derived Schiff base 1-[(E)-(2-hydroxy-3-methoxybenzylidene) amino]-4-methylthiosemicarbazone (VCOH) has been synthesized for colorimetric and fluorescence chemosensors towards PO43− ions. A fluorescence 'turn-on' sensing mechanism of VCOH towards PO43− ions has been explained due to emission from the VCO− ion formed upon transfer of the phenolic proton of VCOH to a PO43− ion. The 1 : 1 stoichiometry between the VCOH probe and PO43− ion is confirmed by Job's plot based on UV-vis titration. The limit of detection (LOD) of VCOH towards PO43− ions is found to be 0.49 nM. The PO43− ion sensing property of probe VCOH has been applied to prepare portable paper strips and for the analysis of real water samples. Fluorescence 'turn-on' and 'turn-off' responses of VCOH towards PO43−and H+ respectively have been used to construct a molecular logic gate. Fluorescence based sensing studies in which the concentration of analytes is adjusted over a broad range can be both laborious and expensive. In order to address these challenges, we have utilized various soft computing methods, including artificial neural networks (ANN), fuzzy logic (FL), and adaptive neuro-fuzzy inference systems (ANFIS), to appropriately model the 'turn-on' and 'turn-off' behaviors of the VCOH probe upon addition of PO43− and H+ respectively as well as to predict the experimental sensing data. [ABSTRACT FROM AUTHOR]

The Stochastic Reduced-Order Models (SROMs) are a non-embedded uncertainty analysis method that has the advantages of high computational efficiency, easy implementation, and no dimensional disasters. Recently, it has been widely used in the field of EMC simulation. In the process of optimizing electromagnetic protection design, the worst-case estimation value is an extremely important uncertainty quantification simulation result. However, the SROMs have a large error in providing this result, which limits its application in the field of EMC simulation prediction. An improved SROM based on the Radial Basis Function (RBF) neural network algorithm is proposed in this paper, which improves the fitness function in the genetic algorithm center clustering process and constructs an RBF neural network model to obtain accurate worst-case estimation results. The accuracy improvement effect of the algorithm proposed in this paper in worst-case estimation is quantitatively verified by using a parallel cable crosstalk prediction example from published literature. [ABSTRACT FROM AUTHOR]

Simple Summary: Accurate identification of individual Amur tigers is vital for their conservation, as it helps us understand their population and distribution. Existing identification methods often fall short in accuracy, and our study focuses on creating a more accurate method for identifying individual Amur tigers using advanced deep learning techniques. We improved an existing neural network model called InceptionResNetV2 by adding features like dropout layers and dual-attention mechanisms to better capture the unique stripe patterns of each tiger and reduce errors during training. We tested our model on a large dataset of tiger images and found it to be highly effective, achieving an average recognition accuracy of over 95% for different body parts, with left stripes reaching the highest 99.37%. This method significantly outperforms previous models and provides a reliable tool for wildlife researchers and conservationists to monitor and protect Amur tigers. By improving the ability to track individual tigers, our research offers practical benefits for preserving this endangered species and enhancing wildlife management practices globally. Accurate and intelligent identification of rare and endangered individuals of flagship wildlife species, such as Amur tiger (Panthera tigris altaica), is crucial for understanding population structure and distribution, thereby facilitating targeted conservation measures. However, many mathematical modeling methods, including deep learning models, often yield unsatisfactory results. This paper proposes an individual recognition method for Amur tigers based on an improved InceptionResNetV2 model. Initially, the YOLOv5 model is employed to automatically detect and segment facial, left stripe, and right stripe areas from images of 107 individual Amur tigers, achieving a high average classification accuracy of 97.3%. By introducing a dropout layer and a dual-attention mechanism, we enhance the InceptionResNetV2 model to better capture the stripe features of individual tigers at various granularities and reduce overfitting during training. Experimental results demonstrate that our model outperforms other classic models, offering optimal recognition accuracy and ideal loss changes. The average recognition accuracy for different body part features is 95.36%, with left stripes achieving a peak accuracy of 99.37%. These results highlight the model's excellent recognition capabilities. Our research provides a valuable and practical approach to the individual identification of rare and endangered animals, offering significant potential for improving conservation efforts. [ABSTRACT FROM AUTHOR]

Flow processes onboard ships are common in order to transport fluids like oil, gas, and water. These processes are controlled by PID controllers, acting on the regulation valves as actuators. In case of a malfunction or refitting, a PID controller needs to be re-adjusted for the optimal control of the process. To avoid experimenting on operational real systems, models are convenient alternatives. When real-time information is needed, digital twin (DT) concepts become highly valuable. The aim of this paper is to analyze and determine the optimal NARX model architecture in order to achieve a higher-accuracy model of a ship's flow process. An artificial neural network (ANN) was used to model the process in MATLAB. The experiments were performed using a multi-start approach to prevent overtraining. To prove the thesis, statistical analysis of the experimental results was performed. Models were evaluated for generalization using mean squared error (MSE), best fit, and goodness of fit (GoF) measures on two independent datasets. The results indicate the correlation between the number of input delays and the performance of the model. A permuted k-fold cross-validation analysis was used to determine the optimal number of voltage and flow delays, thus defining the number of model inputs. Permutations of training, test, and validation datasets were applied to examine bias due to the data arrangement during training. [ABSTRACT FROM AUTHOR]

This paper presents an indoor positioning strategy based on Visible Light Communication that relies on LED luminaires as transmitters, whose luminous flux is modulated at different frequencies, and a light sensor as a receiver. Then, a previously trained Artificial Neural Network (ANN) uses the illuminance signal gathered by the receiver as input to estimate the sensor's position. The main contribution of the technique is that the ANN is trained by using an illuminance estimator based on the lighting distribution of the luminaires, which is obtained through the IES file provided by the luminaire's manufacturer, without the need to collect data from the environment. In this work, the designed illuminance estimator is validated by comparing it to the well-known commercial software DIALux and Relux. The algorithm's setting and the performance evaluation of the ANN are explained. Then, the impact of the lighting uniformity and the environment's number of divisions on the accuracy of the results is analyzed. Error analyses are also made by adding uncertainty to the illuminance measurements obtained by the sensor. Finally, the work is compared to several papers in the field. [ABSTRACT FROM AUTHOR]

This paper proposes a scheme for predicting ground reaction force (GRF) and center of pressure (CoP) using low-cost FSR sensors. GRF and CoP data are commonly collected from smart insoles to analyze the wearer's gait and diagnose balance issues. This approach can be utilized to improve a user's rehabilitation process and enable customized treatment plans for patients with specific diseases, making it a useful technology in many fields. However, the conventional measuring equipment for directly monitoring GRF and CoP values, such as F-Scan, is expensive, posing a challenge to commercialization in the industry. To solve this problem, this paper proposes a technology to predict relevant indicators using only low-cost Force Sensing Resistor (FSR) sensors instead of expensive equipment. In this study, data were collected from subjects simultaneously wearing a low-cost FSR Sensor and an F-Scan device, and the relationship between the collected data sets was analyzed using supervised learning techniques. Using the proposed technique, an artificial neural network was constructed that can derive a predicted value close to the actual F-Scan values using only the data from the FSR Sensor. In this process, GRF and CoP were calculated using six virtual forces instead of the pressure value of the entire sole. It was verified through various simulations that it is possible to achieve an improved prediction accuracy of more than 30% when using the proposed technique compared to conventional prediction techniques. [ABSTRACT FROM AUTHOR]

The paper presents a dynamic model of the TMM-3M heavy mechanized bridge during the span lowering stage. The model is constructed as a multi-body mechanical system, taking into account the elastic deformation of the cable, rear outriggers, front tires, and front suspension system. It is a mechanical model driven by a cable mechanism. Lagrangian equations of the second kind have been applied to establish a system of differential equations describing the oscillations of the mechanical system and serve as the basis for investigating the dynamics of the span-lowering process. The system of differential equations is solved using numerical methods based on MATLAB simulation software. The study has revealed laws of the displacement, velocity, and acceleration of components within the mechanical system, especially those related to the bridge span depending on the choice of the drive speed of the engine during lowering by operator. The research results show that the lowering time increases from 52 seconds to 104 seconds when the engine speed decreases from 1800 rpm to 900 rpm. The tension force on the cable is surveyed to confirm the safety conditions during the span-lowering process. The study also provides recommendations for selecting appropriate engine speeds to minimize span-lowering time while ensuring the safety conditions of the TMM-3M bridge during the span-lowering process. This research is an important part of a comprehensive study on the working process of the heavy mechanized bridge TMM-3M to make practical improvements, aiming to reduce deployment time, decrease the number of deployment crew members, and increase the automation capability of the equipment. [ABSTRACT FROM AUTHOR]

Plastic deformation forming with metal pipe blanks by contact blast loading inside pipes is an interesting moldless forming technique, also a complex and error-prone process. Some advantages are very characteristic of this forming technique such as no cost of mold, tooling and low energy consumption, no complicated control equipment compared to other forming techniques such as casting, rolling, tube hydrostatic forming, bending - welding. Up to now, the calculation and design of this forming technique mainly use some existing reference empirical formulas, so the experimental results are only suitable in the range of small pipe diameters, and still there are significant deviations for larger pipe diameters. In order to increase the predictability and accuracy of forming process by contact blast loading inside large pipes, this paper presents a study on the influence of the mass of highly explosive material - TNT to the forming ability of large steel pipes from API-5LX-42 mild steel materials by modern 3D numerical simulation using Abaqus/Cae software. Four output criteria with maximum values are used to evaluate the efficiency of this forming process, includ- ing maximum diameter of the blast zone (Dmax ≤2*Do), Von Mises stress (Smax ≤UTS), Hoop plastic strain component (PE22 max ≤1), and Pipe wall thinning rate (€7-max ≤60%). The results of this research on the plastic deformation forming process using numerical simulation can be used for the next experimental step to evaluate the difference between simulation and experiment, as well as use this data in the calculation and design of pipe products with circular or square cross-sections to save both time and money of trial and error before application in actual manufacturing. [ABSTRACT FROM AUTHOR]

Side-scan sonar plays a crucial role in underwater exploration, and the autonomous detection of side-scan sonar images is vital for detecting unknown underwater environments. However, due to the complexity of the underwater environment, the presence of a few highlighted areas on the targets, blurred feature details, and difficulty in collecting data from side-scan sonar, achieving high-precision autonomous target recognition in side-scan sonar images is challenging. This article addresses this problem by improving the You Only Look Once v7 (YOLOv7) model to achieve high-precision object detection in side-scan sonar images. Firstly, given that side-scan sonar images contain large areas of irrelevant information, this paper introduces the Swin-Transformer for dynamic attention and global modeling, which enhances the model's focus on the target regions. Secondly, the Convolutional Block Attention Module (CBAM) is utilized to further improve feature representation and enhance the neural network model's accuracy. Lastly, to address the uncertainty of geometric features in side-scan sonar target features, this paper innovatively incorporates a feature scaling factor into the YOLOv7 model. The experiment initially verified the necessity of attention mechanisms in the public dataset. Subsequently, experiments on our side-scan sonar (SSS) image dataset show that the improved YOLOv7 model has 87.9% and 49.23% in its average accuracy ( m A P 0.5 ) and ( m A P 0.5:0.95), respectively. These results are 9.28% and 8.41% higher than the YOLOv7 model. The improved YOLOv7 algorithm proposed in this paper has great potential for object detection and the recognition of side-scan sonar images. [ABSTRACT FROM AUTHOR]

This document is a summary of a special issue of the journal Processes titled "Process Monitoring and Fault Diagnosis." The issue explores the application of data analytic techniques to enhance stable operation and safety in chemical processes and related industries. The collection of research papers covers various topics, including process fault detection, bearing fault diagnosis, remaining useful life prediction, and more. The papers introduce cutting-edge methodologies and demonstrate their reliability through validation. The issue aims to foster communication and the development of advanced process monitoring techniques. [Extracted from the article]

This document is a compilation of various scientific papers and preprints covering a wide range of topics, including protein folding, cell migration, machine learning, deep neural networks, neural scaling laws, representations and generalization in artificial and brain neural networks, and the neuron as a direct data-driven controller. The papers discuss different aspects of these subjects, providing a comprehensive overview of the current research in these fields. This document can be a valuable resource for library patrons conducting research on these topics, particularly in the fields of neuroscience and artificial intelligence. [Extracted from the article]

This document discusses the degradation and failure mechanisms of dielectric insulation in medium- and high-voltage power equipment. It highlights the importance of controlling insulation material degradation to prevent equipment failures and reduce the risk of environmental pollution. The document includes several research papers that address various topics related to the measurement, monitoring, and improvement of power equipment components. These papers cover issues such as winding breakdown faults in transformers, overvoltages caused by vacuum circuit breaker interruptions, insulation resistance degradation in cables, temperature rise in composite insulators, partial discharges and their effects on insulation, and acoustic inspection for detecting partial discharges. The document also presents studies on the technical condition of on-load tap changers, the behavior of silicone elastomers under electrical and mechanical stress, and the percolation phenomenon in square matrices. [Extracted from the article]

Due to the large intra-class differences between the same categories and the scale imbalance between different categories in the remote sensing image dataset, the semantic segmentation task presents the problem of small-scale object information loss, the imbalance between foreground and background, and simultaneously the background dominates, which seriously affects the performance of the network model. To solve the above problems, this paper proposes an efficient bilateral branch depth neural network model based on the U-Net depth neural network, named BBU-Net. Firstly, one branch of the network learns the distribution characteristics of the original data, and the other focuses on difficult samples. Then the two branches improve the representation and classification ability of the neural network by accumulating learning strategies. Finally, considering the geometric diversity of remote sensing images, this paper adopts test time augmentation and reflection padding strategies and proposes a balanced weighted loss function named CombineLoss to alleviate the imbalance in the training process. The depth neural network proposed in this paper was first tested on the Inria Aerial Image Labeling Dataset, and 87.53% of mean intersection over union and 97.4% of mean pixel accuracy were obtained, respectively. At the same time, to verify the model's complexity, the model proposed in this paper is compared with the neural network based on integrated learning. The comparison results show that the spatial complexity of the network proposed in this paper is much lower than the neural network obtained by integrated learning, and the parameters are also much smaller than the neural network based on integrated learning. Then use the satellite building dataset I in the WHU Building Dataset and mainstream semantic segmentation methods for multiple groups of comparative experiments. The experimental results show that the method proposed in this paper can effectively extract the semantic information of remote sensing images, significantly improve the imbalance of remote sensing image data, improve the performance of the network model, and achieve a good semantic segmentation effect, which fully proves the effectiveness of this method. [ABSTRACT FROM AUTHOR]

This document is a guest editorial from the journal IET Generation, Transmission & Distribution. It discusses the use of artificial intelligence (AI) in reliable forecasting for energy sectors. The editorial highlights the challenges of integrating renewable energy sources and fluctuating electricity demand, and emphasizes the importance of accurate forecasting for system operators. The document also provides summaries of several papers included in a special issue on AI-empowered forecasting in energy sectors, covering topics such as load forecasting, wind power prediction, and control parameter optimization. The editorial concludes by recommending further research and practical implementations of AI approaches in the energy sectors. [Extracted from the article]

Biosensors integrated with artificial intelligence (AI) hold immense potential for transforming healthcare through rapid, automated diagnostics and precision therapeutics. This paper reviews the convergence of biosensing and AI towards developing smart biomedical systems. The fundamentals, historical evolution, and classification of biosensors are presented, highlighting key applications across infections, chronic illnesses, and environmental monitoring. Core AI concepts, including machine learning, neural networks, computer vision, and natural language processing, are discussed, along with their implementation to augment biosensor functionality, connectivity, point-of-care adoption, and laboratory automation. Promising research directions and real-world case studies applying AI-integrated biosensors for early diagnosis and drug delivery are discussed. The opportunities and challenges in advancing this synergistic technology are contemplated, underscoring the need for cross-disciplinary collaboration, clinical validation, ethical vigilance and supportive policy environments to successfully translate AI-biosensors into practical healthcare solutions. [ABSTRACT FROM AUTHOR]

Diagnosing multi-stage diseases typically requires doctors to consider multiple data sources, including clinical symptoms, physical signs, biochemical test results, imaging findings, pathological examination data, and even genetic data. When applying machine learning modeling to predict and diagnose multi-stage diseases, several challenges need to be addressed. Firstly, the model needs to handle multimodal data, as the data used by doctors for diagnosis includes image data, natural language data, and structured data. Secondly, privacy of patients' data needs to be protected, as these data contain the most sensitive and private information. Lastly, considering the practicality of the model, the computational requirements should not be too high. To address these challenges, this paper proposes a privacy-preserving federated deep learning diagnostic method for multi-stage diseases. This method improves the forward and backward propagation processes of deep neural network modeling algorithms and introduces a homomorphic encryption step to design a federated modeling algorithm without the need for an arbiter. It also utilizes dedicated integrated circuits to implement the hardware Paillier algorithm, providing accelerated support for homomorphic encryption in modeling. Finally, this paper designs and conducts experiments to evaluate the proposed solution. The experimental results show that in privacy-preserving federated deep learning diagnostic modeling, the method in this paper achieves the same modeling performance as ordinary modeling without privacy protection, and has higher modeling speed compared to similar algorithms. [ABSTRACT FROM AUTHOR]

As a new generation of transportation, electric vehicles play an important role in carbon-peak targets. The development of electric vehicles needs the support of a charging network, and improper planning of charging stations will result in a waste of resources. In order to expand the charging network of electric vehicles and give full play to the low-carbon and efficient characteristics of electric vehicles, this paper proposed a charging station planning method that considers the characteristics of carbon emission trends. This paper combined the long short-term memory (LSTM) network with the stochastic impacts by regression on population, affluence, and technology (STIRPAT) model to predict the carbon emission trend and quantified the correlation between the construction speed of a charging station and the evolution characteristics of carbon emission by Pearson's correlation coefficient. A multi-stage charging station planning model was established, which captures the dynamic characteristics of the charging demand of the transportation network and determines the station deployment scheme with economic and low-carbon benefits on the spatiotemporal scale. The Pareto frontier was solved by using the elitist non-dominated sorting genetic algorithm. The model and solution algorithm were verified by the actual road network in a certain area of Shanghai. The results showed that the proposed scheme can meet the charging demand of regional electric vehicles in the future, improve the utilization rate of charging facilities, and reduce the carbon emission of transportation networks. [ABSTRACT FROM AUTHOR]

This article discusses the topic of longevity risk and capital markets, focusing on the 2022-2023 update. It highlights the increasing importance of longevity risk and related capital market solutions in academic research and the life market. The article mentions various investment products created by the re/insurance industry and capital markets, such as mortality catastrophe bonds and longevity bonds. It also provides a summary of nine academic papers presented at the Longevity 17 conference, covering topics such as retirement income solutions, equity release mortgages, health inequalities, mortality forecasting, and long-term care in Taiwan. The article concludes by mentioning future conferences and their associated special issues. [Extracted from the article]

Scene classification and recognition have always been one of the most challenging tasks of scene understanding due to the inherent ambiguity in visual scenes. The core of scene classification and recognition tasks is scene representation. Deep learning advances in computer vision, especially deep CNNs, have significantly improved scene representation in the last decade. Deep convolutional features extracted from deep CNNs provide discriminative representations of the images and are widely used in various computer vision tasks, such as scene classification. Deep convolutional features capture the appearance characteristics of the image and the spatial information about different image regions. Meanwhile, the semantic and context information obtained from high-level concepts about scene images, such as objects and their relationships, can significantly contribute to identifying scene images. Therefore, in this paper, we divide visual scenes into two categories, object-based and layout-based. Object-based scenes are scenes that have scene-specific objects and, based on those objects, can be described and identified. In contrast, the layout-based scenes do not have scene-specific objects and are described and identified based on the appearance and layout of the image. This paper proposes a new neural network model for representing and classifying visual scenes, which we call G-CNN (GNN-CNN). The proposed model includes two modules, feature extraction and feature fusion, and the feature extraction module composes of visual and semantic branches. The visual branch is responsible for extracting deep CNN features from the image, and the semantic branch is responsible for extracting semantic GNN features from the scene graph corresponding to the image. The feature fusion module is a novel two-stream neural network that fuses the CNN and GNN feature vectors to produce a comprehensive representation of the scene image. Finally, a fully-connected classifier classified the obtained comprehensive feature vector into one of the pre-defined categories. The proposed model has been evaluated on three benchmark scene datasets, UIUC Sports, MIT67, and SUN397, and obtained classification accuracy of 99.91%, 96.01%, and 85.32%, respectively. In addition, a new dataset named Scene40, which has been introduced in our previous paper, is also used for further evaluation of the proposed method. The comparison results based on classification accuracy criteria show that the proposed model can outperform the best previous methods on three benchmark scene datasets. [ABSTRACT FROM AUTHOR]

Growing popularity of self-service in retail stores and increasing associated shrinkage presents an urgent need for computer-vision-based product recognition in the area of self-checkouts. The article focuses on individual product recognition using automated workflow in images collected from retail store self-checkouts. The interest of this research lies exclusively in the recognition of barcodeless products—ones that present a challenge of being identified quickly and qualitatively at self-checkouts. Image sets representative of retail store product distribution do not exist as of the time of writing to the authors' knowledge. Images collected by exploiting self-checkout events often contain products partially covered by customer body parts, inside semi-transparent plastic bags, or not present in the area of interest. Due to the huge assortment of products that varies between stores and changes frequently, manual image labeling, filtering and long training time are unpractical. The proposed method investigates the need for automated steps to eliminate empty images and eliminate images where product visibility is unsatisfactory. Authors achieved 80.5±1.2% classification accuracy on a real-world dataset of 194 products using automatic workflow. The ablation studies proved the need for image filtering in both training and inference workflows. The neural network architecture tuned to the self-checkout dataset proved to outperform well-known networks: the suggested architecture's training time is a fraction of ImageNet's best EfficientNet and accuracy is slightly better. The suggested method generalization is proved on comparable products dataset Fruits 360, where 99.6% accuracy was achieved—comparable or better than other authors. [ABSTRACT FROM AUTHOR]

Asphalt pavement's density measurement is an important step in the quality control of asphalt road construction. It is usually achieved by applying the coring method (CM), nuclear density gauge (NDG), and electromagnetic density gauge (EDG). CM is the most accurate method, but it is a destructive method because the pavement is damaged when the cores are taken. NDG and EDG are nondestructive methods with high efficiency, but their measurement accuracy is poorer than that of CM. An EDG commonly used in density measurement is named pavement quality indicator (PQI). A novel method named density profiling system (DPS) is also based on the potential EDG. However, it was not applied to this research because more tests are required to verify its accuracy. This paper presents an approach to improve the accuracy of the nondestructive methods with NDG and PQI. It is based on the artificial neural network (ANN), which processes the raw data got from NDG and PQI and produces the predicted asphalt density as the output. The density measured in CM was used as the target density and the error between ANN-predicted density and target density was computed. To minimize this error, various ANN architectures and learning algorithms were tried in the ANN training process. Each established ANN model makes a substantial improvement in the performance of NDG or PQI in asphalt density measurement. Practical Applications: This research was initiated by Fulton Hogan (FH) Limited, a large road construction and maintenance company in New Zealand. FH lab teams are responsible for asphalt road density measurement in FH's road projects. One of the main method they use is to measure the densities of the cores taken from asphalt pavements (coring method). It is quite accurate but destructive and very time-consuming. They also use NDG or PQI, which are highly efficient nondestructive measurement devices. However, their measurement accuracy is poorer than that of the coring method. FH lab teams wanted to have a new density measurement method that is both accurate and efficient. An ANN-based approach is presented in this paper to address the issues faced by the FH lab teams. Densities collected with coring methods, NDG, and PQI were used to train and validate the ANN models. The results from the ANNs show substantial improvements of the measurement accuracy and efficiency. The proposed approach has been presented to the FH lab teams, who are impressed with its performance and plan to implement it in their projects. [ABSTRACT FROM AUTHOR]

The development and implementation of an innovative system designed to automatically score English writing ability using advanced machine learning algorithms is challenging task. The core objective of the study is to establish a reliable and efficient method for assessing written English, which is crucial in educational and professional settings. The paper begins with an overview of the existing methods of English writing assessment, highlighting their limitations, such as time consumption and potential biases in human evaluation. The main focus of the study is the design and testing of a machine learning-based system. Various algorithms, including Natural Language Processing (NLP) techniques and neural network models, are explored and integrated to assess writing quality, grammar, coherence, and content relevance. The system's architecture is detailed, explaining how these algorithms work in tandem to evaluate and score writing. An experimental setup is described where the system is trained and validated using a large dataset of English writing samples, ranging from beginner to advanced levels. The performance of the system is measured against traditional scoring methods, with emphasis on accuracy, consistency, and the ability to handle diverse writing styles and complexities. The results demonstrate the system's proficiency in accurately scoring English writing, with a notable reduction in scoring time compared to human evaluators. The paper discusses the implications of these findings for educational institutions and language testing organizations, suggesting that this system could revolutionize how English writing is assessed. [ABSTRACT FROM AUTHOR]

The task of question matching/retrieval focuses on determining whether two questions are semantically equivalent. It has garnered significant attention in the field of natural language processing (NLP) due to its commercial value. While neural network models have made great strides and achieved human-level accuracy, they still face challenges when handling complex scenarios. In this paper, we delve into the utilization of different specializations encoded in different layers of large-scale pre-trained language models (PTMs). We propose a novel attention-based model called ERNIE-ATT that effectively integrates the diverse levels of semantics acquired by PTMs, thereby enhancing robustness. Experimental evaluations on two challenging datasets showcase the superior performance of our proposed model. It outperforms not only traditional models that do not use PTMs but also exhibits a significant improvement over strong PTM-based models. These findings demonstrate the effectiveness of our approach in enhancing the robustness of question matching/retrieval systems. [ABSTRACT FROM AUTHOR]

In response to the issue of short-term fluctuations in photovoltaic (PV) output due to Cloud movement, this paper proposes a method for forecasting short-term PV output based on a Depthwise Separable Convolution Visual Geometry Group (DSCVGG) and a Deep Gate Recurrent Neural Network (DGN). Initially, a cloud motion prediction model is constructed using a DSCVGG, which achieves edge recognition and motion prediction of clouds by replacing the previous convolution layer of the pooling layer in VGG with a depthwise separable convolution. Subsequently, the output results of the DSCVGG network, along with historical PV output data, are introduced into a Deep Gate Recurrent Unit Network (DGN) to establish a PV output prediction model, thereby achieving precise prediction of PV output. Through experiments on actual data, the Mean Absolute Error (MAE) and Mean Squared Error (MSE) of our model are only 2.18% and 5.32 x 10-5, respectively, which validates the effectiveness, accuracy, and superiority of the proposed method. This provides new insights and methods for improving the stability of PV power generation. [ABSTRACT FROM AUTHOR]