Search

Paper is a material that is used in many areas of everyday life. The development of paper with special and environmentally friendly properties will contribute to it being used differently than before. In this work, we present a simple, fluorine-free and low-cost method to prepare a multifunctional paper coating with TiO2 nanoparticles modified with 3-aminopropyltriethoxysilane (KH550) and polydimethylsiloxane (PDMS). The effects of the content of precursors such as titanium isopropoxide (TTIP) and PDMS on the wettability, microstructure and durability of the coating were investigated. The result showed that the coated paper exhibited excellent superhydrophobicity and self-cleaning properties with a water contact angle (WCA) of 162.7° and a water sliding angle (WSA) of 2.5°. In addition, the coated paper showed excellent oil/water separation with over 98% after 10 test cycles and high mechanical resistance with an abrasion resistance of 0.26% weight loss after 20 abrasion cycles using the Taber abrasion test (ASTM D4060) with wheel type CS-10. The results of this study indicate a possible method for producing fluorine-free multifunctional paper, which has the potential to expand the application versatility of the material. [ABSTRACT FROM AUTHOR]

Improving paper characteristics through natural and cost-effective fillers is a massive issue in the paper industry. In the process of manufacturing paper, inorganic and organic fillers are utilized. Organic fillers are only appropriate for specific applications, and their expensive cost has limited their use. Here, various concentrations of sugarcane press mud (SPM) waste were applied to obtain pure calcium oxide nanoparticles (CaONPs) after the calcination to use as a potential filler in the papermaking by mixing the CaONPs at various ratios (5, 10, 15, and 20%), and paper properties have been investigated. Transmission electron microscopy (TEM), selected area electron diffraction (SAED), scanning electron microscope (SEM), and energy-dispersive X-ray spectroscopy (EDX) were utilized to characterize the CaONPs produced. The finding reveals that the influence of nano CaO fillers filled at different ratios (5, 10, 15, and 20%) on tensile, tear index, porosity, and smoothness was slowly decreased when increasing the content of nano filler to 35.9, 55.0, 565.7, and 260.3 at (0%) decrease to 30.7, 42.4, 381.6, and 188.4 at (20%), respectively. Also, opacity and brightness were increased from 93.0 and 71.7 at (0%) to 99.0 and 72.3 at (20%), respectively. The previous results revealed that the CaONPs at (20%) represent the optimal owing to the small particle size of CaONPs is satisfactory for provoking the prosperities of paper. [ABSTRACT FROM AUTHOR]

Sensitizers are used to prepare photosensitive materials for ink-printing and thermal-recording media. Typical sensitizers contain an aromatic ring and exhibit aryl hydrocarbon receptor-mediated activity. They can accumulate in aquatic biota, leading to the disruption of ecosystems. Effluent from paper recycling plants has been identified as a source of contamination, and the presence of sensitizers in toilet paper may represent a new source of contamination in aquatic environments. To examine possible sources of contamination by sensitizers, this study investigated the levels of sensitizers in recycled toilet paper. We also studied the prevalence of sensitizers in rivers receiving effluents from sewage treatment plants in Japan, from 2020 to 2022. We detected eight sensitizers and related compounds in both toilet paper and river water samples; their total concentrations ranged from 0.78 to 34 µg/g (mean: 12 µg/g) in toilet paper and 58–1167 µg/L (median: 77 µg/L) in water. In the water samples, sensitizers were partitioned between liquid and suspended solid phases, and in suspended solids, sensitizers accounted for an average of 42% of the total. Correlation analysis showed a high correlation between sensitizer composition in the water from a river receiving sewage treatment plant effluents and toilet paper. Since these compounds were also detected in the river water analyzed in this study, toilet paper should be considered a novel source of sensitizers contamination in sewage treatment systems. [ABSTRACT FROM AUTHOR]

Holocellulose fibers provide great potential to make paper with high performance. However, inappropriate reaction conditions may limit its improvement in paper performance due to the lack of sufficient research data. In this work, paper is prepared from the birch holocellulose fibers based on peracetic acid treatment and the papermaking process. The features of resulting holocellulose fibers are evaluated for different peracetic acid treatment conditions such as temperature and time. It reveals that high temperature and long treatment time lead to the degradation of hemicellulose/cellulose and the destruction of fibers, which further results in the poor mechanical performance of paper. By optimization for the treatment condition of holocellulose fibers, the corresponding paper exhibits the highest tensile strength (93 MPa), good bursting strength (601 kPa), and tearing strength (647 mN). The determination of optimum conditions will provide guidelines for the industrial production of holocellulose fibers and paper. [ABSTRACT FROM AUTHOR]

A comparative study of the supramolecular structure, physicochemical properties, and morphology of the powder celluloses (PCs) obtained from the waste paper of newsprint and cardboard, plant celluloses, and nonconventional raw materials was conducted using the methods of FT-IR spectroscopy, high-resolution solid-state 13C NMR spectroscopy, wide-angle X-ray scattering, and scanning electron microscopy (SEM). According to the FT-IR and 13C NMR spectroscopy results, the functional composition of the PCs is similar to that of the wood PCs and matches highly purified cellulose samples. The crystallographic structure of the powder samples corresponds to the structure of cellulose I. The crystallinity and the transverse dimensions of the crystallites are 39.4 and 40.2%, and 45 Å [110] and 54 Å [110], for the PCs from newsprint paper and cardboard, respectively. These values considerably exceed those for the initial waste paper samples. A comparative analysis of the SEM results showed a significant similarity among the PC fibers of different origin. The results of the study of the physicochemical properties of the PCs isolated from the waste paper allow predicting their competitive application in comparison with plant PCs. [ABSTRACT FROM AUTHOR]

The economic development of a country directly depends upon industries. But this economic development should not be at the cost of our natural environment. A substantial amount of water is spent during paper production, creating water scarcity and generating wastewater. Therefore, the Pollution Control Board classifies this industry into red category. Water is used in different papermaking stages such as debarking, pulping or bleaching, washing, and finishing. The wastewater thus generated contains lignin and xenobiotic compounds such as resin acids, chlorinated lignin, phenols, furans, dioxins, chlorophenols, adsorbable organic halogens (AOX), extractable organic halogens (EOCs), polychlorinated biphenyls, plasticizers, and polychlorinated dibenzodioxins. Nowadays, several microorganisms are used in the detoxification of these hazardous effluents. Researchers have found that microbial degradation is the most promising treatment method to remove high biological oxygen demand (BOD) and chemical oxygen demand (COD) from wastewater. Microorganisms also remove AOX toxicity, chlorinated compounds, suspended solids, color, lignin, derivatives, etc. from the pulp and paper mill effluents. But in the current scenario, mill effluents are known to deteriorate the environment and therefore it is highly desirable to deploy advanced technologies for effluent treatment. This review summarizes the eco-friendly advanced treatment technologies for effluents generated from pulp and paper mills. [ABSTRACT FROM AUTHOR]

Honesty of publications is fundamental in science. Unfortunately, science has an increasing fake paper problem with multiple cases having surfaced in recent years, even in renowned journals. There are companies, the so-called paper mills, which professionally fake research data and papers. However, there is no easy way to systematically identify these papers. Here, we show that scanning for exchanged authors in resubmissions is a simple approach to detect potential fake papers. We investigated 2056 withdrawn or rejected submissions to Naunyn–Schmiedeberg's Archives of Pharmacology (NSAP), 952 of which were subsequently published in other journals. In six cases, the stated authors of the final publications differed by more than two thirds from those named in the submission to NSAP. In four cases, they differed completely. Our results reveal that paper mills take advantage of the fact that journals are unaware of submissions to other journals. Consequently, papers can be submitted multiple times (even simultaneously), and authors can be replaced if they withdraw from their purchased authorship. We suggest that publishers collaborate with each other by sharing titles, authors, and abstracts of their submissions. Doing so would allow the detection of suspicious changes in the authorship of submitted and already published papers. Independently of such collaboration across publishers, every scientific journal can make an important contribution to the integrity of the scientific record by analyzing its own pool of withdrawn and rejected papers versus published papers according to the simple algorithm proposed in the present paper. [ABSTRACT FROM AUTHOR]

Soot stain from diverse sources is the most common stain that stains historical paper documents found in libraries, museums, and storage facilities. It is believed to be one of the types of deterioration that arises from the contact between stains and paper sheets. Therefore, in the present work, the effectiveness of the synthesized hybrid nanogel consisting of carbopol and nanoparticles (NPs) of ZnO, TiO2, or Fe3O4, in low and high-viscosity forms, for eliminating soot stains from historical paper manuscripts was conducted. The prepared hybrid nanogels were characterized utilizing the TEM, AFM, XRD, DLS, and Zeta Potential techniques. Following preparation, the soot-stained paper samples were heated to 105 °C for 6 days, a process known as accelerated thermal aging. Surface morphology, mechanical properties and the color change of the paper samples were investigated. The prepared hybrid nanogel had a spherical shape with well-defined edges and uniform size, with an average particle diameter ranging from 30 to 35 nm. There was no significant NPs agglomeration seen, suggesting uniform dispersion in the carbopol matrix. Additionally, the prepared gels' crystal structure and phase purity were revealed by the XRD analysis results. Paper fibers were visible in some parts of the treated sample with TiO2/carbopol hybrid nanogel at high-viscosity before aging. Cleaning soot-stained paper samples using high-viscosity Fe3O4/carbopol hybrid nanogel is more successful than using low-viscosity nanogel. the sample treated with high-viscosity ZnONPs/carbopol hybrid nanogel produced the highest total color differences (ΔE) (26.17). The paper sample treated with high-viscosity ZnO/carbopol hybrid nanogel exhibited the maximum tensile strength (61.8 N/mm2) and elongation at break (1.174%). The evaluation of the paper samples both before and after the cleaning process revealed that, the treatment with high-viscosity ZnO/carbopol hybrid nanogel gave the best results in removing soot stains from stained paper samples. [ABSTRACT FROM AUTHOR]

Nowadays, a high percentage (> 50%) of the paper produced in Europe uses recovered paper (secondary fibers) as raw material. In order to improve the mechanical properties of the paper produced, different kinds of additives are usually incorporated into the paper. Emerging renewable materials based on agricultural or forest residues, such as cellulose nanomaterials, have recently proved good capacities as reinforcing agents for different applications. In this work, pulp from wheat straw with a content of cellulose nanomaterial has been produced and tested as a mechanical reinforcing agent for paper production. A soda semi-chemical process was applied for the delignification of straw, to produce pulp with high cellulose content. Posteriorly, pulps with cellulose nanofibers were obtained in a high-pressure homogenizer, applying three different pretreatments to the cellulose pulp (acid hydrolysis, enzymatic hydrolysis and thermal treatment with glycerol) in order to facilitate the obtention of cellulose nanomaterial. Handsheets of paper were prepared from two sources of secondary fiber (fluting paper and old corrugated containers), adding different percentages of wheat straw derivatives (0, 3.5, 5 and 7%). The fibers' morphology and the papers' mechanical properties were investigated. Noticeable improvement rates (up to 25%) were observed for some mechanical properties of paper containing nanocellulose produced after the enzymatic and acid pretreatments. The quality of the secondary fibers source also affected the improvement rates achieved, with higher percentage changes for the lower-quality recycled paper. [ABSTRACT FROM AUTHOR]

Au-Ag alloy nanostars based flexible paper surface enhanced Raman spectroscopy sensors were fabricated through simple nanostar coating on regular office paper, and the surface enhanced Raman spectroscopy detection performances were investigated using crystal violet dye analyte. Au-Ag nanostars with sharp tips were synthesized via metal ions reduction method. Transmission electron microscope images, X-Ray diffraction pattern and energy dispersive spectroscopy elemental mapping confirmed the nanostar geometry and Au/Ag components of the nanostructure. UV-Vis-NIR absorption spectrum shows wide local surface plasmon resonance induced optical extinction. In addition, finite-difference time-domain simulation shows much stronger electromagnetic field from nanostars than from sphere nanoparticle. The effect of coating layer on Raman signal intensities was discussed, and optimized 5-layer coating with best Raman signal was obtained. The Au-Ag nanostatrs homogeneously distribute on paper fiber surface. The detection limit is 10−10 M, and the relationship between analyte concentrations and Raman signal intensities shows well linear, for potential quantitative analysis. The calculated enhancement factor is 4.795×106. The flexible paper surface enhanced Raman spectroscopy sensors could be applied for trace chemical and biology molecule detection. [ABSTRACT FROM AUTHOR]

Composite materials have been widely used because of their superior properties compared to those of the original material. Separation of the constituent materials is not easy in the recycling process, and such an effort lowers economic viability. As such, this study employed a pyrolysis as a valorizing method for the composite material. Disposable paper cup waste (DPCW) was chosen as the model compound for paper-plastic composites. To offer green/sustainable features, CO2 was employed as a raw and reactive material in the pyrolysis process. It was proved that DPCW primarily composed of cellulose (outer layer) and polyethylene (inner layer). In the single-stage and multistage pyrolysis of DPCW, the CO2 reactivity in the homogeneous reaction of CO2 and DPCW-derived volatiles was not rapid. To accelerate the reaction kinetics governing the reactivity of CO2, the catalytic pyrolysis of DPCW over Ni/SiO2 was performed. The formation of syngas increases significantly, suggesting that CO2 reactivity was catalytically enhanced. The generation of syngas (enhanced by CO2) was inversely related to the DPCW oil generation, indicating that more carbon was assigned from the oil to the gaseous pyrogenic products. The study results would offer a strategic means to valorize paper-plastic composites and CO2 into energy through pyrolysis. [ABSTRACT FROM AUTHOR]

We report an innovative and facile approach to fabricating an ultrasensitive plasmonic paper substrate for surface-enhanced Raman spectroscopy (SERS). The approach exploits the self-assembling capability of poly(styrene-b-2-vinyl pyridine) block copolymers to form a thin film at the air-liquid interface within the single microdroplet scale for the first time and the subsequent in situ growth of silver nanoparticles (AgNPs). The concentration of the block copolymer was found to play an essential role in stabilizing the droplets during the mass transfer phase and formation of silver nanoparticles, thus influencing the SERS signals. SEM analysis of the morphology of the plasmonic paper substrates revealed the formation of spherical AgNPs evenly distributed across the surface of the formed copolymer film with a size distribution of 47.5 nm. The resultant enhancement factor was calculated to be 1.2 × 107, and the detection limit of rhodamine 6G was as low as 48.9 pM. The nanohybridized plasmonic paper was successfully applied to detect two emerging pollutants—sildenafil and flibanserin—with LODs as low as 1.48 nM and 3.45 nM, respectively. Thus, this study offers new prospects for designing an affordable and readily available, yet highly sensitive, paper-based SERS substrate with the potential for development as a lab-on-a-chip device. [ABSTRACT FROM AUTHOR]

Background: The mobile device diffusion has increasingly highlighted the opportunity to collect patient-reported outcomes (PROs) through electronic patient-reported outcomes measurements (ePROMs) during the clinical routine. Despite the ePROMs promises and advantages, the equivalence when a PRO measure is moved from the original paper-and-pencil to the electronic version is still little investigated. This study aims at evaluating equivalence between PROMs and ePROMs self-administration in people with multiple sclerosis (PwMS); in addition, preference of self-administration type was evaluated. Methods: The Manual Ability Measure-36 (MAM-36) and Fatigue Severity Scale (FSS) were selected for the equivalence test. The app ABOUTCOME was developed through a user-centered design approach to administer the questionnaires on tablet. Both paper-and-pencil and electronic versions were randomly self-administered. Intrarater reliability between both versions was evaluated through the intraclass correlation coefficient (ICC, excellent for values ≥ 0.75). Results: Fifty PwMS (35 females) participated to the study (mean age: 54.7±11.0 years, disease course: 27 relapsing-remitting and 23 progressive; mean EDSS: 4.7±1.9; mean disease duration: 13.3±9.5 years). No statistically significant differences were found for the means total scores of MAM-36 (p = 0.61) and FSS (p = 0.78). The ICC value for MAM-36 and FSS was excellent (0.98 and 0.94, respectively). Most of participants preferred the tablet version (84%). Conclusion: The results of the study provide evidence about the equivalence between the paper-and-pencil and electronic versions of PROs administration. In addition, PwMS prefer electronic methods rather than paper because the information can be provided more efficiently and accurately. The results could be easily extended to other MS PROs. [ABSTRACT FROM AUTHOR]

Flexible and small-scale energy storage technologies are critical for future applications such as wearable electronics. In this context, paper has emerged as a lightweight, low-cost, and ecologically friendly flexible substrate for energy storage devices. This paper presents a simple method for fabricating a micro-supercapacitor (MSC) using a wax printing approach that can achieve high resolution without requiring complex processes. In addition, the developed MnO2–Au-paper (MAP) microelectrodes with high porosity exhibit enhanced charge and ion transfer while maintaining a stable flexibility. The solid-state micro-supercapacitor delivers a very large areal capacitance of 624.32 mF cm−2 at 0.2 mA cm−2 and is stable under external stress. The highest energy and power densities obtained for the present MSCs (55.5 μWh cm−2 and 1.59 mW cm−2, respectively), are much larger than those previously reported for pseudocapacitive MSCs, including flexible ones. [ABSTRACT FROM AUTHOR]

The pulp and paper industry is critical to global industrial and economic development. Recently, India's pulp and paper industries have been facing severe competitive challenges. The challenges have impaired the environmental performance and resulted in the closure of several operations. Assessment and prediction of the performance of the Indian pulp and paper industry using various parameters is a critical task for researchers. This study proposes a framework for performance assessment and prediction based on Data Envelopment Analysis (DEA), Artificial Neural Networks, and Deep Learning (DL) to assist industry administration and decision-making. We presented a case study based on eight industries to demonstrate the methodology's applicability. This study analyses and predicts industry performance based on sample data observations over 30 years. The result suggests the DEA-DL-based efficiency prediction has an overall MSE of 0.08 compared with the actual efficiency. Furthermore, the efficiency rankings are compared between the three techniques. The results suggest that the integrated DEA-DL method is primarily accurate in most scenarios with the actual values. The findings of this study provide a comprehensive analysis of environmental performance for policymakers. [ABSTRACT FROM AUTHOR]

Pine needle waste-based ethylene scavenging paper was developed by incorporating nanomaterial halloysite nanotube (HNT) and micro-fibrillated cellulose (MFC). The ethylene scavenging capacity was evaluated with the banana storage in the developed nanocomposite paper. The quality of bananas, such as color, physical appearance, total soluble solids (TSS), pH, and weight loss, was evaluated during banana storage. The PN/MFC/HNT 30% based packaging system delayed the ripening and senescence process. The color of banana, TSS, and pH was stable during the storage period in the PN/MFC/HNT 30%. In contrast, the banana in control PN packaging has accelerated quality decaying have been observed. The ethylene content was in the control PN packaging recorded at 633.67 μL L−1 and 424.12 μL L−1 in the PN/MFC/HNT 30% package on the last day of storage analysis. The nanocomposite paper with the waste pine needle with HNT and MFC has observed an excellent ethylene scavenging capacity with more than 200 μL L−1 on the 10th day of storage analysis. The developed paper has high potential in the active packaging application for fresh produces. [ABSTRACT FROM AUTHOR]

Some ancient Chinese paper artifacts dyed with amur cork tree bark extracts are currently preserved to different extents in museums and libraries worldwide. As traditional natural plant dyes, the long-term performance of the amur cork tree bark extract-dyed handmade paper has been questioned under a preserved environment. The photodegradation process of the extract-dyed papers was examined under accelerating artificial UVA irradiation conditions according to China national standard-paper and board- accelerated aging (exposure to light). Changes during aging were analyzed by optical observation and scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectrometry (FTIR), pH, and tensile strength and folding endurance tests. The results showed that the main components from extracted dyes played an important role in affecting the photodegradation properties of dyed paper. The changes in surface color, pH, morphology and mechanical properties after the artificial UVA accelerated degradation tests revealed that a suitable concentration of the extract dyes for maintaining the long-term irradiation stability of the paper is important. [ABSTRACT FROM AUTHOR]

Anger suppression is important in our daily life, as its failure can sometimes lead to the breaking down of relationships in families. Thus, effective strategies to suppress or neutralise anger have been examined. This study shows that physical disposal of a piece of paper containing one's written thoughts on the cause of a provocative event neutralises anger, while holding the paper did not. In this study, participants wrote brief opinions about social problems and received a handwritten, insulting comment consisting of low evaluations about their composition from a confederate. Then, the participants wrote the cause and their thoughts about the provocative event. Half of the participants (disposal group) disposed of the paper in the trash can (Experiment 1) or in the shredder (Experiment 2), while the other half (retention group) kept it in a file on the desk. All the participants showed an increased subjective rating of anger after receiving the insulting feedback. However, the subjective anger for the disposal group decreased as low as the baseline period, while that of the retention group was still higher than that in the baseline period in both experiments. We propose this method as a powerful and simple way to eliminate anger. [ABSTRACT FROM AUTHOR]

Hydrotalcite samples were prepared in the form of powder and/or sol under different conditions and characterised by various techniques. A suitable system of liquid carriers consisting of perfluoroheptane, isopropanol, and water (PFH-IPA-H2O) was chosen to apply HTlcs as deacidifying agents on paper. The areas of miscibility and immiscibility in the PFH-IPA-H2O system were determined at a temperature of 25 °C. The properties of HTlcs dispersed in the prepared solvent were measured. The size of the particles was determined by optical microscopy with image analysis. The average particle size ranges from 1 µm to 2 µm. The settling speed of particles in the prepared colloidal systems was monitored using turbidimetry. Sols in the mixture of solvents had uniformly dispersed particles that settled slowly. The effect of the prepared colloidal HTlcs dispersions on the properties of the paper, specifically the pH of its surface, was also tested. Hydrotalcites in the form of a sol with a ratio of magnesium to aluminium of 5:1 were found to be promising candidates for deacidification. The use of surfactant additives in the preparation of HTlcs did not positively affect the properties of the paper. [ABSTRACT FROM AUTHOR]

Traditionally, cellulose nanofiber (CNF) production has primarily relied on virgin cellulose sources. Yet, the shift to using paper mill sludge (PMS) as a source for CNF underscores the significance of reusing and recycling industrial byproducts. PMS contains significant amounts of cellulose that can be extracted as a raw material. The purpose of present study is to provide a sustainable approach to PMS utilization as a paper coating additive in the cellulose nanofibrils (CNFPMS) form via simply scalable wire-wound rod coating method. The effect of CNFPMS additive amounts at two coating layers on microstructure and surface properties of coatings such as porosity, air permeability surface roughness and optical properties such as brightness, gloss and CIE L*a*b* is studied, which they can also provide insight for the eventual print performance. Results indicated that the obtained CNFPMS in paper coating shows 52% decrease in porosity, presenting significant improvement in the coating microstructure. The marginal increase in permeability coefficient and surface roughness, 54% and 10%, respectively, suggests improving color reproduction and preventing color density losses. Optical analysis showed slight decrease in brightness and gloss, as was expected. Notably, the lightness was improved, which also indicates increasing color gamut volume in printing applications. As a result, the current work offers a sustainable approach to manage PMS for use in paper coatings as a high-value-added material. [ABSTRACT FROM AUTHOR]

Paper recommendation with personalized methods helps researchers to track the latest academic trends and master cutting-edge academic trends efficiently. Meanwhile, the methods of previous paper recommendation suffer from three problems: data sparsity of content-based and collaborative filtering methods; Graph-based recommendations do not fully consider the personalized information of authors and their articles; Cold start based on deep learning. To overcome those difficulties, we propose a personalized paper recommendation method based on a knowledge graph and Transformer encoder (KGTE) with a self-attention mechanism. Firstly, we add auxiliary information (article title, publication year, citation times, and abstract) as attributes to the nodes of knowledge graph(KG), which contain author, digital object unique identifier(DOI) and keywords. Secondly, BERT is used to represent the semantic information features of the article and Transformer is introduced to fully integrate the feature context. After that, by using RippleNet, we traverse the knowledge graph, filter the user preference distribution and form a set of pre recommended nodes with multi_hop nodes. Finally, the prediction layer sorts the set and gets a Top_n paper recommendation. In the experiments on the DBLP and Aminer datasets, the precision value of KGTE improved by an average of 2.59% over the existing baseline methods DER and 4.23% improvement in NDCG. [ABSTRACT FROM AUTHOR]

Renewable biomass with porous architecture and large surface areas attracted considerable interest in biomedical research due to their biocompatibility and multifunctional applications. The present study envisages synthesizing sustainable ultra-light aerogels from renewable waste tissue paper by cross-linking polyvinyl alcohol and glyoxal. The compressed aerogel pellet with 2 wt% tissue paper exhibits an excellent swelling ratio and hydrostatic pressure of 5.18 in 7 s and 2.94 mmHg, respectively, thereby enhancing hemostatic performance. Moreover, the cytotoxicity studies revealed that the aerogel is non-toxic for the mouse embryo fibroblast with cell viability of 80% at an aerogel concentration of 200 μg/ml. Furthermore, the aerogel also exhibited a low thermal conductivity (0.017–0.038 W/mK). Thus, the synthesized aerogel was found to be an eco-friendly, non-cytotoxic hemostatic agent. [ABSTRACT FROM AUTHOR]

The biennial "Computer Sciences and Information Technologies" conference in Yerevan in September of 2023 was the 14th in this series. This event is of regional interest, provide a networking ecosystem to scientists in areas such as the Mathematical Logic and Logical Reasoning, Discrete Mathematics, Pattern Recognition and Cognitive Sciences, and Applications. 17 selected papers of this conference, included in Special Issue of PRIA journal provide up to date research results and research topics that make a sensitive input to the field known as "Logic Combinatorial Pattern Recognition". Results from Algebra and Mathematical Logic help in structural and semantic areas of pattern recognition, graph theoretical investigations help with clustering and image analysis, other selected papers and results are devoted directly to semantic pattern recognition, to cognitive sciences in general, or they provide application platforms where different artificial intelligence technologies are converging. [ABSTRACT FROM AUTHOR]

Cellulosic-based materials such as hemp fabric and paper have combined characteristics of renewability, biodegradability, flexibility, and recyclability. However, regular products are not suitable for use in unconventional applications due to inherent limitations, and accordingly, enabling new capabilities is a necessity. To this end, the conversion of regular hemp fabric and paper into high-strength products with hydrophobic function via surface engineering was explored. The fluorinated waterborne polyurethane (FWPU) emulsions were first synthesized as functional coatings by in-situ polymerization. The structure and properties of the FWPU emulsion and film were characterized by FTIR, XRD, SEM, TG, and XPS. The results showed that the grafting of perfluorooctanol imparts WPU film excellent hydrophobicity, and the water contact angle increases from 71.2° to 105.9°. After the FWPU coating, the water contact angles of the hemp fabric and paper increase from 0° to 117.1° and 112.8°, respectively. Quite encouragingly, the coating generation of waterborne polyurethane-derived functional additives led to the increase of mechanical strength by more than 23% and 82%, in the case of qualitative filter paper and hemp fabric. Meanwhile, the folding strength of filter paper is increased by 132 times. Overall, this functionalized waterborne polyurethane coating would direct paper and hemp fabric toward diversified applications. [ABSTRACT FROM AUTHOR]

Trimethylsilyl cellulose (TMSC) was employed as the coating matrix for the application of zinc oxide nanoparticles (ZnO) onto paper surfaces and the protections of ZnO/TMSC coating against UV-induced damages and fungal spoilage were evaluated. Filter papers were immersed in 2% w/v TMSC solution loaded with ZnO and air-dried. Three ZnO/TMSC suspensions were prepared with 0.1, 0.5, and 1% w/v ZnO NPs. The presences of ZnO/TMSC protective layers were confirmed with ATR-IR spectroscopy. The coated papers exhibited high surface hydrophobicities. After the coated papers were subject to 365-nm UV irradiation at 400 W for 3 h, the contact angles dramatically dropped. The trimethylsilyl (TMS) groups exposed on the surface formed a moisture barrier and were partially removed on UV exposure. ATR-IR revealed that more TMS groups were removed in the protective layer with no ZnO. UV-irradiated papers turned yellow and papers protected with 1% ZnO/TMSC exhibited significantly lower color changes than that of the uncoated one. Compared to the TMSC-coated paper, the addition of ZnO resulted in a significant reduction in tensile strength at maximum. However, after UV irradiation, significant increases in both the strain at break and strength at maximum were only observed in 1% ZnO/TMSC-protected papers. Regarding their anti-fungal properties, the 1% ZnO/TMSC films were effective in growth inhibitions of Aspergillus sp. and Penicillium sp. on the nonirradiated papers. Despite being hydrophilic after UV-irradiation, growths of the molds were severely suppressed on the UV-irradiated paper. [ABSTRACT FROM AUTHOR]

For shaped charge blasting projects in mining, civil engineering, and similar fields, it is proposed to modify the charge structure by combining slotted tubes and shaped charge liners to obtain a new type of charge structure. This aims to achieve directional rock breaking through the focused action of the shaped charge. The influence of different slotted pipe materials on the directional rock-breaking effect of concentrated energy using a new charge structure is explored through theoretical analysis combined with model test study, high-speed camera, stress–strain gauge, and other equipment. A comparison is made between slotted pipes made of aluminum, kraft paper, and PVC, with the cutting width of 2 mm. Based on the characteristics of the cracks formed after blasting, the new charge structure made of aluminum slotted pipe produces a penetrating crack that is almost consistent with the pre-cracking direction. Based on the corresponding characteristics of successively released blasting energy, the guiding and convergence effect of the new charge structure made of aluminum slotted pipe on the explosion energy is greater than that of the new charge structure made of the other two types of slotted pipe material. According to the strain data measured after blasting, the peak arrival time of the strain peak in the direction of the slotted pipe on one side of the shaped hood is shorter than that in the other two directions, and the peak strain is greater than that in the other two directions while having a better energy gathering effect. Based on the findings, the new charge structure with directional energy concentration has a damage reduction effect. Furthermore, the material of aluminum slotted pipe is found to be better than PVC slotted pipe, whereas the material of PVC slotted pipe is better than kraft paper slotted pipe in achieving directional rock breaking. [ABSTRACT FROM AUTHOR]

Anthraquinone has been widely utilized in the pulp and paper industry as a catalyst for alkaline cooking; however, its application has been recently restricted due to its potential carcinogenic effects. Hence, safer alternatives to anthraquinone have been explored. Agro-industrial by-products have been utilized as sustainable sources of value-added materials. In this study, teak (Tectona grandis) wood waste from Gunung Kidul, Indonesia, which naturally contains lapachol, was utilized as a biocatalyst to enhance delignification and improve pulp yield in alkaline cooking for pulp and paper production. The use of lapachol as a cooking catalyst was investigated for kraft, soda, and prehydrolysis soda cooking. Lapachol accelerated delignification and retained carbohydrate in all three alkaline cooking methods, with its effect being more pronounced in kraft cooking than in soda cooking. This study demonstrates that teak wood extractives with lapachol are promising sustainable catalysts for alkaline cooking. [ABSTRACT FROM AUTHOR]

Persistence and misuse of antibiotics eventually give rise to the progression of resistance development in bacteria. Consequently, accurate, fast and cost-effective sensing devices are required to govern the presence of drugs. Herein, we design a microfluidic paper-based device (μPAD) for the detection of Rifampicin. We selected this analyte because of its persistent overuse for the treatment of tuberculosis, among the major causes of death around the world. In this work, we have integrated Fe-reinforced ZnS nanoparticles supported with rifampicin (RIF) imprinted material on the exterior of Whatman filter paper for the fabrication of paper-based microfluidic device (μPAD). In this fabricated μPAD colorimetric detection was performed, and the synergistic effect of Fe and ZnS was recorded as compared to individual nanomaterials. A distinct color indicator was used to quantify the concentration of the targeted substance by the naked eye. The fabricated paper-based sensor possessed high sensitivity for rifampicin detection, recorded linear calibration curve representing 0.1 µM LOD and excellent selectivity, in comparison to other inferring agents present in real samples. The practical application of this designed μPAD was validated by applying a real sample. [ABSTRACT FROM AUTHOR]

Stone paper is a relatively sustainable alternative to traditional fibre-based paper. Stone paper is made using resin such as high-density polyethylene (HDPE) and a mineral such calcium carbonate (CaCO3). Plasticizers, bulking agents, coupling reagents, dispersing agents, and inorganic fillers are added in the stone paper formulation for imparting different properties. However, the HDPE, used in stone paper formulation, is not biodegradable and can be replaced with biodegradable polymers to make stone paper more environment friendly. The biodegradable stone paper can be easily made using relatively cheaper blown film process. The stone paper can also be made from CaCO3 waste of traditional paper industry and recycled polymer waste. This review paper provides overview about the stone paper, the biodegradable polymeric materials which can be used instead of HDPE, information about the converting processes for stone paper; it's applications and comparison to the traditional paper. [ABSTRACT FROM AUTHOR]

The knowledge graph based on research papers can accurately identify and present the latest developments in scientific and technological (S&T) innovation and is of great significance for supporting strategic decision-making relating to S&T innovation in undeveloped areas. Based on the international research papers produced in Gansu Province during the 13th Five-Year Plan period (2016–2020), five metrics, including the number and characteristics of papers, co-authors, main publications and their fields, major supporting institutions, and main research areas, are established herein. The results indicate that: (i) the total of 29,951 papers were published, which is about 2.89 times that in 2010–2015; (ii) Gansu Province collaborated with 149 countries/regions globally; (iii) the top 5 journals in terms of the number of papers were Medicine, Scientific Reports, RSC Advances, Science of the Total Environment, and Physical Reviews D; (iv) the funding sources were mainly from the national level; and (5) the top 5 research areas were chemistry, engineering, physics, material science, environmental science, and ecology, which accounted for 64.7% of all papers. Finally, the present study puts forward some recommendations for the decision-making process in the strategic layout of S&T innovation in Gansu Province. [ABSTRACT FROM AUTHOR]

This study aims to study the possibility of distinguishing the UV–Vis–NIR spectra of filamentous fungi on a paper substrate from the background. Model samples of five filamentous fungi were used: Alternaria alternata, Aspergillus niger, Cladosporium herbarum, Penicillium chrysogenum, and Trichoderma atroviride. The model samples were cultivated on paper substrates, and two methods, cross-validation (CV) and principal component analysis (PCA), were utilised to compare their spectra with the reference background spectra. The results of the CV analysis indicated that certain combined spectra sets of Cladosporium herbarum, Penicillium chrysogenum, Trichoderma atroviride, Aspergillus niger, and Alternaria alternata, at specific surface concentrations, exhibited two active components, signifying distinguishable differences from the background spectra. Additionally, the score scatter diagrams derived from PCA revealed clusters of samples, further confirming the distinguishability of the filamentous fungi spectra from the background. However, for Trichoderma atroviride, the scatter diagram demonstrated a relatively large scattering of points, impeding the resolution of spectra with a surface concentration of 2 105 cm−2 due to measurement inaccuracies. Based on the combined results of CV and PCA, the study concluded that the lower threshold of measurability for UV–Vis–NIR spectra varied among the different filamentous fungi. For example, Cladosporium herbarum, Penicillium chrysogenum, and Trichoderma atroviride exhibited a threshold around a surface concentration of 2 106 cm−2, while Aspergillus niger had a threshold around 2 105 cm−2, and Alternaria alternata had a threshold around 2 103 cm−2. In summary, this research provides insights into the distinguishability of filamentous fungi spectra on the paper substrate from background spectra using spectral analysis techniques, offering potential applications in fungal identification and characterisation. [ABSTRACT FROM AUTHOR]

Highlights: m-BN/PNF nanocomposite paper with nacre-mimetic layered structures prepared via sol–gel film transformation approach presents excellent thermal conductivity, incredible electrical insulation, outstanding mechanical property and thermal stability. When the mass fraction of m-BN is 50 wt%, m-BN/PNF nanocomposite paper exhibits excellent thermal conductivity and electrical insulation. The λ∥ and λ⊥ are 9.68 and 0.84 W m−1 K−1, and the volume resistivity and breakdown strength are as high as 2.3 × 1015 Ω cm and 324.2 kV mm−1, respectively. The m-BN/PNF nanocomposite paper with 50 wt% m-BN also presents outstanding mechanical properties (tensile strength of 193.6 MPa) and thermal stability (thermal decomposition temperature of 640 °C). With the rapid development of 5G information technology, thermal conductivity/dissipation problems of highly integrated electronic devices and electrical equipment are becoming prominent. In this work, "high-temperature solid-phase & diazonium salt decomposition" method is carried out to prepare benzidine-functionalized boron nitride (m-BN). Subsequently, m-BN/poly(p-phenylene benzobisoxazole) nanofiber (PNF) nanocomposite paper with nacre-mimetic layered structures is prepared via sol–gel film transformation approach. The obtained m-BN/PNF nanocomposite paper with 50 wt% m-BN presents excellent thermal conductivity, incredible electrical insulation, outstanding mechanical properties and thermal stability, due to the construction of extensive hydrogen bonds and π–π interactions between m-BN and PNF, and stable nacre-mimetic layered structures. Its λ∥ and λ⊥ are 9.68 and 0.84 W m−1 K−1, and the volume resistivity and breakdown strength are as high as 2.3 × 1015 Ω cm and 324.2 kV mm−1, respectively. Besides, it also presents extremely high tensile strength of 193.6 MPa and thermal decomposition temperature of 640 °C, showing a broad application prospect in high-end thermal management fields such as electronic devices and electrical equipment. [ABSTRACT FROM AUTHOR]

Traditional papermaking was a significant innovation that intrigued the information-sharing society in a wide range of the globe. The importance of finding the historical background hidden behind the historical traditional paper is critical to understanding societies in history. Advanced molecular biological research is applied to many forensic studies to identify the origin and criminal events. Yet, biological research refrained from the heritage science of traditional papers due to its damage to the samples. The current study explores the Pearson correlation between DNA in traditional paper and non-destructive measurement of characteristics of traditional paper. DNA concentration and purity were found to have a proportional relationship based on the CIEL*a*b* color system. The color of the traditional paper was assessed assessment shows green and yellow rather than red and blue. The DNA concentration demonstrated a positive linear correlation with the peaks of 992 cm−1, 1599 cm−1, and 1628 to 1638 cm−1 region, which were lignin-specific functional groups. The presence of lignin in traditional paper defines the colors green and yellow, which is related to the presence of a cell wall. The quantity of cell walls present is linked to DNA survival during the traditional papermaking process. Furthermore, the partial least square (PLS) regression model is established. The prediction model based on DNA, paper properties, and smoothing + the second derivative preprocessed attenuated total reflection-Fourier-transform infrared (ATR-FTIR) spectral data demonstrated valid purity predictions. The evaluation parameter of the cross-validated prediction model contains a low Root Mean Square Error of Cross-Validation (RMSECV) of 0.091 for DNA purity. The determination coefficient was close to 1. However, the further establishment of a validated DNA extraction methodology is required for the consistency of the prediction model for DNA concentration. The hierarchical clustering analysis demonstrated the agglomerative dendrogram on traditional paper samples. For the dendrogram, the Nasu paper mulberry (originating in northern Japan) was distinguished from another paper mulberry (originating in southwestern Japan) by clustering. By multivariate statistical analysis, the DNA presence and quality were predictable from the Japanese traditional papers. In addition, the clustering analysis provided the possible origin of paper mulberry materials for traditional papers. Based on the preliminary information, the need for DNA analysis on historical traditional paper can be determined. [ABSTRACT FROM AUTHOR]

Congestion is a well-known economic phenomenon in which excessive inputs lead to a decrease in the maximum possible outputs. This study analyzes the relationship between congestion and overinvestment using a data envelopment analysis framework to reveal that some congestion can be eliminated by increasing inputs. The proposed approach classifies congestion into two categories, relative and absolute congestion, depending on the possibility of eliminating congestion by increasing inputs. Corresponding methods for identifying and measuring congestion are proposed and employed for empirical analyses examining China's papermaking and paper products industry. We find that most congestion in 2013–2016 is in the relative congestion and could be eliminated by increasing inputs. The primary causes of congestion are identified based on our analysis and corresponding policy suggestions are proposed for eliminating congestion. [ABSTRACT FROM AUTHOR]

In this paper, by a simple hydrothermal method vertically aligned ZnO nanorod arrays were grown on the carbon fiber paper (CFP) and then through a facile chemical bath deposition method CuO nanosheets were loaded on ZnO nanorod arrays, following by thermal spraying method, carboxylated carbon nanotubes (CCNTs) were successfully integrated with CuO/ZnO@CFP to form a binder-free CuO/ZnO-CCNT@CFP sensor. The sensor shows enhanced sensing activity for baicalein and luteolin determination due to the improved structural integration and synergism of different electrode material components. Remarkably, the CuO/ZnO-CCNT@CFP sensor showed good linear relationships over wide concentration ranges of 0.03–0.70 µM and 0.70–20 µM for baicalein and 0.03–0.45 µM and 0.45–8.5 µM for luteolin detection, with the detection limits of 1.7 nM for baicalein and 0.5 nM for luteolin, respectively. More importantly, the CuO/ZnO-CCNT@CFP sensor was utilized in the simultaneous determination of baicalein and luteolin, delivering linear ranges of 0.4–14 µM (baicalein) and 0.2–6 µM (luteolin) with the limit of detection of 0.05 µM and 0.03 µM, respectively. In addition, the developed CuO/ZnO-CCNT@CFP electrode was further investigated to detect baicalein and luteolin in traditional herbal medicine samples, showing satisfied results in comparison with analytic results from high performance liquid chromatography. [ABSTRACT FROM AUTHOR]

Creatinine is one of the most important biomarkers to detect renal failures. The electrochemical detection of creatinine has been performed using complex enzymatic and non-enzymatic electrode arrays hindering their commercialization. In this work, a new and practical non-enzymatic electrochemical sensor was fabricated depositing copper on carbon paper electrodes by physical vapor deposition (namely Cu/CP). Surface and cross-sectional SEM images demonstrated the deposition of copper over the 3D structure of carbon paper. A thin film was found on the surface, while Cu nanowires with diameters of 180 ± 30 nm were found inside the 3D structure of CP. The thickness of the Cu film on the tubular structures of CP was of 390 ± 40 nm. High-resolution TEM images indicated that the Cu film was integrated by hierarchical structures containing terminal Cu hemispheres of 17.6 ± 2.2 nm. Additionally, interplanar distances from the selected-area electron diffraction pattern demonstrated the presence of Cu0, while Cu2O was also found. Creatinine concentrations in saliva between 16 and 400 µM indicate kidney failure. The Cu/CP electrochemical sensor detected creatinine with linear concentration ranges from 0 to 1000 µM with a r2 = 0.9936. Outstandingly, this sensor presented good reproducibility (RSD = 7.3%), and selectivity to detect creatinine in artificial saliva using interferents like urea, glucose, glycine, ascorbic and uric acids. [ABSTRACT FROM AUTHOR]

The pulp and paper industry is an important contributor to global greenhouse gas emissions1,2. Country-specific strategies are essential for the industry to achieve net-zero emissions by 2050, given its vast heterogeneities across countries3,4. Here we develop a comprehensive bottom-up assessment of net greenhouse gas emissions of the domestic paper-related sectors for 30 major countries from 1961 to 2019—about 3.2% of global anthropogenic greenhouse gas emissions from the same period5—and explore mitigation strategies through 2,160 scenarios covering key factors. Our results show substantial differences across countries in terms of historical emissions evolution trends and structure. All countries can achieve net-zero emissions for their pulp and paper industry by 2050, with a single measure for most developed countries and several measures for most developing countries. Except for energy-efficiency improvement and energy-system decarbonization, tropical developing countries with abundant forest resources should give priority to sustainable forest management, whereas other developing countries should pay more attention to enhancing methane capture rate and reducing recycling. These insights are crucial for developing net-zero strategies tailored to each country and achieving net-zero emissions by 2050 for the pulp and paper industry.A bottom-up assessment of the net greenhouse gas emissions of the pulp and paper industries of 30 countries from 1961 to 2019 leads to country-specific strategies to achieve net zero by 2050. [ABSTRACT FROM AUTHOR]

The effective utilization for recycled carbon fibers (rCFs) is significant for less pollution, low energy consumption and resource conservation. This paper proposed a path for reprocessing the recycled carbon fibers into CF/PA6 fiber papers using flexible papermaking technology. Then, the CF/PA6 fiber paper could be used as an interlayer component to continuous CF woven/epoxy resin composites to form hybrid composites. The configurations of hybrid composites and directions of papers effects on notched impact resistance and flexural performance were systematically discussed. The micro energy absorption mechanism was revealed based on real-time crack tracking. The results indicate that cracks migration between woven and paper contributes to impact and flexural energy absorption, most improving 22.64% and 40.85% respectively in one-layer paper with longitudinal direction in the middle location (L1). Whereas, there is a negative effect of hybrid composites on flexural strength and modulus compared with pure CF woven composites. The behaviors of hybrid composites with longitudinal direction of paper are greater than that with transverse direction on stress, modulus, and the absorbed energy in the same configurations. Furthermore, spatial flexural morphologies are also affected by damage path. The final failure modes integrate the continuous woven fabric composite and discontinuous CF/PA6 fiber paper composite, mainly including fiber and matrix fracture, fiber pull-out and delamination. It provides a guidance for material design and structural optimization in reusing of carbon fibers. [ABSTRACT FROM AUTHOR]

Structures of paper-based microfluidic chips affect the sweat-absorbing time when they are used for sweat analysis. For the first time, we use COMSOL to establish two types of paper-based chip sweat-absorbing models that can quantitatively analyze this phenomenon. The standard model contains 1089 sweat glands, and the simplified model simplifies it according to the idea of finite element division, including 81 sweat glands. Sweat flows in from the bottom of the paper-based chip and out from the electrode contact surface (the upper surface of the central cylinder of the paper-based chip). Both models contain six paper-based chip structures, use Richards' equation as the governing equation, set the outflow velocity to 0, and set the sweating rate of a sweat gland at 0.6 μ L/min. In the standard model, it takes only 46 s for the paper-based structure with the fastest sweat-absorbing speed to completely saturate the electrode contact surface with sweat (meaning the sweat-absorbing time is 46 s), which is 13.06 % shorter than that of the slowest structure. In the simplified model, the top 3 structures of sweat-absorbing speed are consistent with the standard model. The simulation results show that the sweat-absorbing time is positively correlated with the H value of the bottom surface of the paper-based structure (defined as the area of the bottom surface /the area of sweat glands covered by the bottom surface), which can be proved by analytical and experimental methods. The analytical method proves that this conclusion can be generalized to other sweating rate conditions. [ABSTRACT FROM AUTHOR]

This research proposes a method for designers to develop kinetic structures derived from folding patterns, which are viable in architecture based on flat and curved folding. It describes how these folding patterns can be used to generate mechanisms free of common problems like self-locking. It questions how it can be learnt from the mathematics of folding techniques so that what is learnt can be transformed into real plates and linkages of kinetic systems. It also examines geometric formations of kinetic surfaces regarding seventeen symmetry groups of crystals to understand global motion and its enablers. The research contribution of this paper consists of a method with a systematic flow as validated through a case study. The case study exemplifies how any arbitrary sketch is transformed into an actual kinetic structure by folding paper models, digital simulations, and prototypes. [ABSTRACT FROM AUTHOR]

Metagenomics has revolutionized access to genomic information of microorganisms inhabiting the gut of herbivorous animals, circumventing the need for their isolation and cultivation. Exploring these microorganisms for novel hydrolytic enzymes becomes unattainable without utilizing metagenome sequencing. In this study, we harnessed a suite of bioinformatic analyses to discover a novel cellulase-degrading enzyme from the camel rumen metagenome. Among the protein-coding sequences containing cellulase-encoding domains, we identified and subsequently cloned and purified a promising candidate cellulase enzyme, Celcm05-2, to a state of homogeneity. The enzyme belonged to GH5 subfamily 4 and exhibited robust enzymatic activity under acidic pH conditions. It maintained hydrolytic activity under various environmental conditions, including the presence of metal ions, non-ionic surfactant Triton X-100, organic solvents, and varying temperatures. With an optimal temperature of 40 °C, Celcm05-2 showcased remarkable efficiency when deployed on crystalline cellulose (> 3.6 IU/mL), specifically Avicel, thereby positioning it as an attractive candidate for a myriad of biotechnological applications spanning biofuel production, paper and pulp processing, and textile manufacturing. Efficient biodegradation of waste paper pulp residues and the evidence of biopolishing suggested that Celcm05-2 can be used in the bioprocessing of cellulosic craft fabrics in the textile industry. Our findings suggest that the camel rumen microbiome can be mined for novel cellulase enzymes that can find potential applications across diverse biotechnological processes. [ABSTRACT FROM AUTHOR]

This study investigates the views of contemporary Muslim jurists about withdrawing treatment of the terminally ill. Its aim is threefold. Firstly, it analyses jurists' views concerning core themes within the process of withdrawing treatment. Secondly, it provides insight into fatwas about withdrawing treatment. Thirdly, it compares these views with current medical standards in Europe and the Atlantic world on withdrawing treatment. The data consisted of six papers by Muslim jurists presented at the conference of the Islamic Fiqh Council in 2015. We conducted a directed content analysis (DCA) through a predetermined framework and compiled an overview of all previous fatwas referred to in the papers, which are also analysed. The results show that the general consensus is that if health cannot be restored, treatment may be withdrawn at the request of the patient and/or his family or on the initiative of the doctor. The accompanying fatwa emphasizes the importance of life-prolonging treatment if this does not harm the patient. It becomes apparent in the fatwa that the doctor has the monopoly in decision-making, which is inconsistent with current medical standards in Europe. Managing disclosure in view of the importance of maintaining the hope of Muslim patients may challenge the doctor's obligation to share a diagnosis with them. [ABSTRACT FROM AUTHOR]

This study aims to highlight the current trends in the literature on sustainability by applying a bibliometric review of papers on sustainability published in Environment, Development and Sustainability. Bibliometric analysis is a quantitative approach to bibliographic materials that highlights the core theoretical and empirical research on a specific field. In addition, it allows the classification of previous studies. Previous bibliometric reviewers were limited to sustainability papers in specific industries, while this study considers all papers on sustainability to provide further insights on overall sustainability topics. The analysis was based on keyword cartography analysis, bibliometric authors' citation analysis, bibliometric papers' citation analysis, bibliometric references' co-citation analysis, journals' co-citation cartography, and qualitative content analysis. A total of 997 articles on sustainability were reviewed. Bibliometric analysis was performed using VOSviewer and content analysis was performed using WordStat. Six major clusters were identified: environmental sustainability, sustainable development, urban sustainability, ecological footprint, environment, and climate change. In addition, the results reveal that Environment, Development and Sustainability has increasingly experienced important growth in research papers and citations, reflecting its significant contribution to the sustainability research field. In addition, this study presents recommendations for future research opportunities in the field of sustainability. The findings of this study have implications for sustainability research, such as the assessment of environmental and social sustainability in multinational institutional contexts and across industries as well as the examination of the impact of environmental and social sustainability on different corporate aspects and decisions. This study is the only one to review the key topics on which papers published in Environment, Development and Sustainability are focused and can be largely used for sustainability practices. This study provides an overview of how the literature on sustainability has developed, as well as a summary of the most productive authors, along with countries, organizations, and journal sources. This offers an opportunity for future research to focus on this topic. [ABSTRACT FROM AUTHOR]

Despite progress in the prevention and diagnosis of cancer, current technologies for tumor detection present several limitations including invasiveness, toxicity, inaccuracy, lengthy testing duration and high cost. Therefore, innovative diagnostic techniques that integrate knowledge from biology, oncology, medicinal and analytical chemistry are now quickly emerging in the attempt to address these issues. Following this approach, here we developed a paper-based electrochemical device for detecting cancer-derived Small Extracellular Vesicles (S-EVs) in fluids. S-EVs were obtained from cancer cell lines known to express, at a different level, the αvβ6 integrin receptor, a well-established hallmark of numerous epithelial cancer types. The resulting biosensor turned out to recognize αvβ6-containing S-EVs down to a limit of 0.7*103 S-EVs/mL with a linear range up to 105 S-EVs /mL, and a relative standard deviation of 11%, thus it may represent a novel opportunity for αvβ6 expressing cancers detection. The detection of cancer in its early stages can greatly prevent disease development, however, current technologies for tumor detection present several limitations. Here, the authors develop a paper-based electrochemical device for detecting cancer-derived small extracellular vesicles (S-EVs) in fluids, recognizing αvβ6-containing S-EVs down to a limit of 0.7*103 S-EVs/mL with a linear range up to 105 S-EVs/mL. [ABSTRACT FROM AUTHOR]

Copyright of NTM Zeitschrift für Geschichte der Wissenschaften, Technik und Medizin is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Plant-fibre ancient-books with cultural significance should be protected from moisture and pollution. In this work, a strategy of surface in-situ protection (building composite coating) was adopted to achieve good hydrophobicity, moisture-proofness and ink-contamination resistance at the surface of archaistic paper. By pre-ring opening of epoxy-based poly(vinyl silsesquioxane) (POSS) and spray of POSS/polyvinylidene fluoride (PVDF) mixed solution, in-situ construction of POSS/PVDF composite coating at the surface of ancient paper was achieved. Compared to water-absorbing ancient paper, POSS/PVDF co-modified ancient paper shows strong humidity resistance. The surface of co-modified ancient paper (epoxy-group pre-ring opening for 45 min) displays high hydrophobicity (water contact angle of ~142.6°), ascribed to greatly improved surface roughness of paper fibres as well as complete coverage of high-content Si/F elements on fibre surface. POSS-modified and neat ancient-paper materials show surface water contact angles of ~113.9° and 0°, respectively. Robust ink-resistance of POSS/PVDF co-modified ancient-paper surface is realized. The innovation in this work lies in perfect synergy of cage-shaped POSS and threadlike PVDF in coating. This work might open a way for surface nondestructive-protection to ancient-books for damp-proof, hydrophobic and anti-fouling characteristics. [ABSTRACT FROM AUTHOR]

To stimulate the development and application of formal methods in industry, we need to promote research and development for the improvement of formal methods and tools for industrial applications, and we need to exchange experiences of the industrial usage of these methods and tools. This special issue of Software Tools for Technology Transfer presents various tools and experience reports that are targeting the use of formal methods in industry. The papers in this special issue are extended versions of selected conference papers from the proceedings of the 27th International Conference on Formal Methods for Industrial Critical Systems (FMICS 2022). [ABSTRACT FROM AUTHOR]