Search

We propose a new type of soft actuator based on carbon nanotube (CNT) composite paper (CNTCP), i.e., a paper actuator. In our previous study, we demonstrated that actuator operation was possible when using CNTCPs as electrodes with ordinary paper containing ionic liquid between the electrodes; however, their bending motion was not sufficient. Therefore, we here attempt to modify the paper actuator. For this, we tried to soften CNTCPs by first reducing the ratio of contained CNTs. In addition, as a new strategy, we took advantage of the fact that the proposed actuator was made of paper and introduced the Kirigami (introducing periodical slits to papers) technique into the structure of our paper actuator. As a result, the performance of the actuator was improved, and its bending motion became visibly larger. The response of the improved actuator to the input voltage was investigated in detail, and the detailed operating conditions could be clarified. Moreover, it was found that not only a bending motion but also a twisting motion could be realized in specific slit patterns. It is thought that the fact that the variation in movement can be increased simply by adding incisions is unique to the proposed paper actuator. [ABSTRACT FROM AUTHOR]

This study explores the use of cellulose nanofiber (CNF)-stabilized Pickering emulsions for paper coatings, focusing on their rheological properties and effects on hydrophilicity and water vapor transmission rate (WVTR). Two types of Pickering emulsions, oil-in-water (O/W), were stabilized with 1 wt% CNF extracted from fique by-products. The oily phases of the emulsions were composed of poly(lactic acid) (PLA) and cocoa butter (CB). The physical stability, viscosity, and viscoelasticity of the emulsions were characterized. The emulsions were applied to the surfaces of Bond and Kraft papers using the rod-coating method. The coating process involved first applying a layer of the PLA emulsion followed by a layer of the CB emulsion. The coated papers were then evaluated by FE-SEM, contact angle, adhesion work, and water vapor transmission rate (WVTR). The results indicated that the coatings effectively produced a slightly hydrophobic surface on the papers, with contact angles approaching 90°. Initially, Kraft paper exhibited a WVTR value of 29.20 ± 1.13 g/m2·h, which significantly decreased to 7.06 ± 2.80 g/m2·h after coating, representing a reduction of 75.82%. Similarly, natural Bond paper showed a WVTR value of 30.56 ± 0.34 g/m2·h, which decreased to 14.37 ± 5.91 g/m2·h after coating, indicating a reduction of 47.02%. These findings demonstrate the potential of CNF-stabilized Pickering emulsions for enhancing the performance of paper coatings in terms of hydrophobicity and moisture barrier properties. The approach of this study aligns with global sustainability goals in packaging materials combining the use of PLA and CB to develop a waterborne coating to enhance the moisture barrier properties, demonstrated by a substantial reduction in water vapor transmission rates, and an improved hydrophobicity of coated papers. [ABSTRACT FROM AUTHOR]

Excessive copper (Cu2+) causes adverse effects on human health and the ecological environment. Traditional methods for detecting Cu2+ have drawbacks such as high detection costs, complex operating conditions, and being time consuming. Therefore, there is an urgent need to develop simple detection methods to better meet specific health and environment quality needs. In this work, a paper-based fluorescence sensor was prepared (herein referred to as the as-prepared method) by immersing filter paper in aqueous polyethyleneimine (PEI) solution, and its potential use in Cu2+ detection was investigated. The results showed that the as-prepared paper samples, with fluorescence properties obtained by aggregation-induced luminescence of PEI, have selective recognition of Cu2+ based on the internal filtration effect, and the lowest detection limit is 0.03 μM. In addition, the relative error of this method is in the range of 1.80~2.23%, which is relatively comparable to the national standard method (0.63~630 μM), demonstrating high accuracy. Therefore, paper-based sensors with a simple preparation method have potential applications in the detection of Cu2+ in water. [ABSTRACT FROM AUTHOR]

The pulp and paper industry is under increasing pressure to reduce its energy consumption and carbon footprint. This study examines the feasibility of integrating high-temperature heat pumps (HTHP) into tissue paper production to enhance energy efficiency and decarbonization. Focusing on the energy-intensive drying process, the study uses data from a typical tissue paper mill to simulate and optimize an HTHP system producing four tons per hour of nine-bar saturated steam. It also addresses necessary modifications for HTHP integration applicable across the sector. Various refrigerants were analyzed, achieving a maximum coefficient of performance (COP) of 2.01. Results showed that HTHP can reduce energy consumption and emissions by up to 17% and 40%, respectively, based on the European electricity mix. Although steam production costs increase by 55% compared to fossil fuel-based systems, HTHP is more cost-effective than direct electric resistance heating, which raises costs by 196%. With a CO2 price of EUR 100/t, HTHP offers a 12% cost reduction. However, without public funding, capital expenditures may be unsustainable in many regions, though viable in countries with favorable gas and electricity price differentials. The paper underscores the need for advancements in HTHP technology and cost reductions, emphasizing industry adaptation for seamless HTHP integration. [ABSTRACT FROM AUTHOR]

Featured Application: A paper-based triboelectric nanogenerator using carbon nanotube composite papers, as developed in this study, has the potential to be used as an energy harvester in fields such as the Internet of Things (IoT). A unique triboelectric nanogenerator (TENG) using carbon nanotube (CNT) composite papers is proposed in this work. CNT composite papers can be fabricated easily using a method based on the production of Japanese washi paper. To obtain and evaluate the proposed TENGs, several types of CNT composite papers and aluminum plates were prepared. As the CNT composite paper contained many paper fibers, it was expected to be negatively charged, and the aluminum plate was expected to be positively charged across the triboelectric series. Through various experiments, it was confirmed that CNT composite papers could be used as TENGs. In addition, it was found that when a CNT composite paper was used, it contributed to triboelectricity generation, and the contained CNTs efficiently transferred the generated charge to the electrodes. Furthermore, output voltages approaching a maximum RMS value of 300 mV could be obtained. The results of this study will aid in the practical application of paper-based TENGs in the near future. [ABSTRACT FROM AUTHOR]

To address the high power consumption associated with image refresh operations in EPDs, this paper proposes a low-power driving waveform that reduces the refresh power of EPDs by lowering the system's peak power. Compared to traditional waveforms, this waveform first activates the particles before erasing them, thus reducing voltage polarity changes. Additionally, it introduces a specific duration of 0 V voltage during the activation phase based on the physical characteristics of the electrophoretic particles to reduce the voltage span. Finally, a particular duration of 0 V voltage is introduced during the erasure phase to minimize the voltage span while ensuring the stability and consistency of the reference gray scale. The experimental results demonstrate that, in standard power tests, the new driving waveform reduces the power fluctuation value by 1.33% and the energy fluctuation value by 37.24% compared to the traditional driving waveform. This reduction in refresh power also mitigates screen flicker and ghosting phenomena. [ABSTRACT FROM AUTHOR]

Paper-based cultural relics inevitably face a variety of diseases such as acidification, yellowing, and strength loss during long-term preservation, where weakly alkaline inorganic materials play an important role in their deacidification treatments. In this work, by simply adjusting the supersaturation of crystal growing solution without the use of any organic additives, one-dimensional (1D) and two-dimensional (2D) weakly alkaline materials—magnesium carbonate hydrates (MCHs)—were controllably synthesized. It is worth noting that the coatings of 1D/2D MCHs not only cause little change in chromatic aberration and water wettability, but also ensure their safety for alkali-sensitive pigments. Meanwhile, the deacidification, anti-aging, strength-enhancing, and flame-retardant effects of these materials have been tested on ancient book papers, all of which achieved good protective effects. In contrast, 1D MCH materials brought about significant enhancement in both mechanical strengths and flame-retardant effects, and the related effects were investigated. Based on this facile micromorphology control strategy, more low-dimensional nanomaterials are expected to be synthesized by design for the protection of paper-based relics, which will expand our knowledge on functional deacidification and protection mechanisms. [ABSTRACT FROM AUTHOR]

This text describes a study that investigates the mechanics, environmental benefits, and potential challenges of paper recycling machines. It highlights the importance of these machines in promoting a more sustainable future, and how they align with the United Nations' Sustainable Development Goals (SDGs). The SDGs aim to address issues such as climate change, land use, responsible consumption and production, and poverty alleviation by promoting sustainable economies. This study explores the transformative potential of the recycling industry and its impact on the economy of Papua New Guinea (PNG). [ABSTRACT FROM AUTHOR]

Flexible paper-based materials play a crucial role in the field of flexible electromagnetic shielding due to their thinness and controllable shape. In this study, we employed the wet paper forming technique to prepare carbon fiber paper with a thickness gradient. The electromagnetic shielding performance of the carbon fiber paper varies with the ladder-like thickness distribution. Specifically, an increase in thickness gradient leads to higher reflectance of the carbon fiber paper. Within the X-band frequency range (8.2–12.4 GHz), reflectivity decreases as electromagnetic wave frequency increases, indicating enhanced penetration of electromagnetic waves into the interior of the carbon fiber paper. This enhancement is attributed to an increased fiber content per unit area resulting from a greater thickness gradient, which further enhances reflection loss and promotes internal multiple reflections and scattering effects, leading to increased absorption loss. Notably, at a 5 mm thickness, our carbon fiber paper exhibits an impressive average overall shielding performance, reaching 63.46 dB. Moreover, it exhibits notable air permeability and mechanical properties, thereby assuming a pivotal role in the realm of flexible wearable devices in the foreseeable future. [ABSTRACT FROM AUTHOR]

Although paper packages are biodegradable, their applications in food packaging are limited due to high affinity for absorbing moisture and the high permeability of gases and liquids with surroundings. Therefore, exploring the use biodegradable coatings such as nanocellulose to improve barrier is a relevant strategy. This study assessed the efficacy of unbleached nanofibrillated cellulose (NFC) as an additive to paper and coatings. Using NFC derived from unbleached eucalyptus pulp, a 5% mass addition to the paper pulp and a 2 mm wet nanocellulose coating to kraft paper handsheets made from pine pulp were investigated. In addition, nanocellulose films of similar thicknesses were appraised. The physical, morphological, mechanical, and thermal characteristics of the resulting papers were assessed. Incorporating NFC notably enhanced the morphology area of the paper by padding its pores, thus increasing its density by up to 48% and improving its water barrier properties by up to 50%. The mechanical strength showed significant enhancements, particularly in bursting and tensile strength with increases of up to 134% and 50%, respectively. Anyhow, the films exhibited lower bursting indices and no improvement in the tearing index. Nonetheless, the thermal stability of the handsheets with NFC coating meets the minimum requirements for food packaging. [ABSTRACT FROM AUTHOR]

This paper evaluates the modification of fiber morphology and the strength property development of paper from Enset fiber as a function of soda pulping conditions and refining energy. Soda pulping was conducted at pulping temperatures between 160 and 180 °C. The NaOH charge was 16, 20, and 24% based on the initial raw material. The beating of pulp was conducted using a Jokro mill. The refining of pulp was conducted in a laboratory refiner at different refining intensities. The mild Jokro mill beating was not effective on Enset fiber pulp. On the other hand, the laboratory refiner effectively refined the pulp. The fiber morphology was altered in the way of improving the paper formation and strength. The beating degree of the pulp was increased to about 49 °SR. The tensile index was enhanced to around 80 Nm/g using a refining energy input of 250 kwh/t. From the results, it can be concluded that Enset fiber pulp is suitable for packaging papers due to its high strength level. On the other hand, Enset fiber can be a potential raw material for specialty papers like filter paper and tea bags because of its high porosity. [ABSTRACT FROM AUTHOR]

The recyclable paper based on photochromic materials not only reduces the pollution in the paper manufacture process, but also reduces the pollution caused by the use of ink, which receives wide attention. In this paper, a series of phosphomolybdic acid–phosphotungstic acid/ZnO/polyvinylpyrrolidone (PMoA-PWA/ZnO/PVP) hybrid films, which had different ratio of PMoA/PWA, was prepared by the ultrasonic composite method. The results indicated that the hybrid film prepared when the ratio of PMoA to PWA was 3 had the best photochromic performance. In this system, ZnO was the photosensitizer, while PMoA/PWA was the chromophore. The photochromic mechanism of the PMoA-PWA/ZnO/PVP hybrid film was based on the photogenerated electron transfer mechanism. ZnO generated photoelectron under the excitation of visible light, then PMoA and PWA obtained the photoelectron and produced photoreduction reaction to generate heteropolyblue. The visible light photochromic paper was prepared by loaded PMoA-PWA/ZnO/PVP hybrid film (A3) on A4 paper. Application tests showed that the prepared paper had extremely stable, excellent and reversible visible light photochromic properties, whether it was printing patterns or words, and could replace ordinary paper to realize the reuse of paper. [ABSTRACT FROM AUTHOR]

In this paper, the aging characterization of a kind of insulating paper modified by magnetron sputtering MgO particles based on a microstrip resonant sensor was presented. Firstly, the modified insulating paper with 0, 15 and 30 min MgO particle sputtering times was prepared by a magnetron sputtering device. After that, the properties of the modified insulating paper with different sputtering times were analyzed through microscopic characterization, infrared spectrum, polymerization degree, dielectric constant, AC breakdown strength and thermal aging experiments. The results show that the dielectric constant of the modified insulating paper decreased obviously, the AC breakdown strength increased and the thermal aging resistance was better after 15 min of sputtering. The overall performance of the modified insulating paper after 30 min of sputtering is reduced due to excessive sputtering. In addition, microstrip resonant sensors are introduced to characterize the thermal aging degree of the modified insulating paper, and two microstrip resonant sensors are prepared: a complementary split ring resonator (CSRR) and an interdigital-capacitor-shaped defected ground structure resonator (IDCS-DGS). The resonance frequency deviation of the modified insulating paper samples after aging was measured by microstrip resonance sensors to show the influence of aging temperature on aging degree. The experimental results show that the test results of the microstrip resonance sensors are in good agreement with the traditional characterization methods and can characterize the various aging stages of the modified insulating paper to a certain extent, which proves the feasibility of the characterization method. [ABSTRACT FROM AUTHOR]

The European Community is striving for a sustainable society as suggested by the UN's 2015 sustainability goals. The circular economy in the paper and packaging industry is of particular importance here because it consumes many resources. The paper industry in Germany with a fiber recycling rate of 85% in 2022 is already a pioneer and role model for other industries. All materials should be recyclable. Fiber-based composites/laminates are currently becoming increasingly important. Essential questions are: which collection systems and recycling paths should be used for fiber-based composites/laminates, and where are there currently challenges with recycling? To answer these questions, 58 questionnaires answered by German experts and practitioners in the German paper industry were evaluated. Wet-strength papers, adhesives, plastic coatings and wax dispersions were perceived as a problem by 70% of all respondents, and packaging residues by almost 40%. Additionally, 90% stated that the composition of paper for recycling changes regularly due to legislation, trends and innovations, while 60% attributed this to recent changes in legislation. For at least 80%, virgin fibers from packaging are valuable for paper recycling, but only 15% of respondents stated that virgin fibers compensate for the disadvantages of rejects. Almost 90% expected challenges with fiber-based composites/laminates in the existing paper for recycling processes. Overall, the collection and recycling of fiber-based composites/laminates in conventional paper for recycling collection and the recycling system is not desirable. An integrated collection, sorting and recycling system should be considered, especially because a further increase in fiber-based composites is to be expected. In the end, the design for recycling and following recycling guidelines are the key to the recycling industry in the future. Good recyclability of fiber-based composites/laminates would improve their acceptance by paper recyclers. Their virgin fibers are particularly valuable. The results of our study are relevant to the recycling and fiber industry, standard-setting bodies, regulatory authorities and research. The limitation of this study is that experts from the paper industry were interviewed, but the recyclability of the fiber materials was not analyzed by measurement, and the machine technology of the interviewees could not be examined and evaluated. [ABSTRACT FROM AUTHOR]

Nanorod structures exhibit a high surface-to-volume ratio, enhancing the accessibility of electrolyte ions to the electrode surface and providing an abundance of active sites for improved electrochemical sensing performance. In this study, tetragonal α-MnO2 with a large K+-embedded tunnel structure, directly grown on microfibrous carbon paper to form densely packed nanorod arrays, is investigated as an electrocatalytic material for non-enzymatic glucose sensing. The MnO2 nanorods electrode demonstrates outstanding catalytic activity for glucose oxidation, showcasing a high sensitivity of 143.82 µA cm−2 mM−1 within the linear range from 0.01 to 15 mM, with a limit of detection (LOD) of 0.282 mM specifically for glucose molecules. Importantly, the MnO2 nanorods electrode exhibits excellent selectivity towards glucose over ascorbic acid and uric acid, which is crucial for accurate glucose detection in complex samples. For comparison, a gold electrode shows a lower sensitivity of 52.48 µA cm−2 mM−1 within a linear range from 1 to 10 mM. These findings underscore the superior performance of the MnO2 nanorods electrode in both sensitivity and selectivity, offering significant potential for advancing electrochemical sensors and bioanalytical techniques for glucose monitoring in physiological and clinical settings. [ABSTRACT FROM AUTHOR]

Many ranking algorithms and metrics have been proposed to identify high-impact papers. Both the direct citation counts and the network-based PageRank-like algorithms are commonly used. Ideally, the more complete the data on the citation network, the more informative the ranking. However, obtaining more data on citation relations is often costly and challenging. In some cases, obtaining the citation counts can be relatively simple. In this paper, we look into using the additional citation counts but without additional citation relations to form more informative metrics for identifying high-impact papers. As an example, we propose enhancing the original PageRank algorithm by combining the local citation network with the additional citation counts from a more complete data source. We apply this enhanced method to American Physical Society (APS) papers to verify its effectiveness. The results indicate that the proposed ranking algorithm is robust against missing data and can improve the identification of high-quality papers. This shows that it is possible to enhance the effectiveness of a network-based metric calculated on a relatively small citation network by including only the additional data of the citation counts, without the additional citation relations. [ABSTRACT FROM AUTHOR]

This work reports on the development of an analyte sampling strategy on a plasmonic substrate to amplify the detection capability of a dual analytical system, paper spray ionization–mass spectrometry (PSI-MS) and surface-enhanced Raman spectroscopy (SERS). While simply applying only an analyte solution to the plasmonic paper results in a limited degree of SERS enhancement, the introduction of plasmonic gold nanoparticles (AuNPs) greatly improves the SERS signals without sacrificing PSI-MS sensitivity. It is initially revealed that the concentration of AuNPs and the type of analytes highly influence the SERS signals and their variations due to the "coffee ring effect" flow mechanism induced during sampling and the degree of the interfacial interactions (e.g., van der Waals, electrostatic, covalent) between the plasmonic substrate and analyte. Subsequent PSI treatment at high voltage conditions further impacts the overall SERS responses, where the signal sensitivity and homogeneity significantly increase throughout the entire substrate, suggesting the ready migration of adsorbed analytes regardless of their interfacial attractive forces. The PSI-induced notable SERS enhancements are presumably associated with creating unique conditions for local aggregation of the AuNPs to induce effective plasmonic couplings and hot spots (i.e., electromagnetic effect) and for repositioning analytes in close proximity to a plasmonic surface to increase polarizability (i.e., chemical effect). The optimized sampling and PSI conditions are also applicable to multi-analyte analysis by SERS and MS, with greatly enhanced detection capability and signal uniformity. [ABSTRACT FROM AUTHOR]

Lactate is a critical regulatory factor secreted by tumors, influencing tumor development, metastasis, and clinical prognosis. Precise analysis of tumor-cell-secreted lactate is pivotal for early cancer diagnosis. This study describes a paper-based microfluidic chip to enable the detection of lactate levels secreted externally by living cells. Under optimized conditions, the lactate biosensor can complete the assay in less than 30 min. In addition, the platform can be used to distinguish lactate secretion levels in different cell lines and can be applied to the screening of antitumor drugs. Through enzymatic chemical conversion, this platform generates fluorescent signals, enabling qualitative assessment under a handheld UV lamp and quantitative analysis via grayscale intensity measurements using ImageJ (Ver. 1.50i) software. The paper-based platform presented in this study is rapid and highly sensitive and does not necessitate other costly and intricate instruments, thus making it applicable in resource-constrained areas and serving as a valuable tool for investigating cell lactate secretion and screening various anti-cancer drugs. [ABSTRACT FROM AUTHOR]

Polyethylene-, polyvinylidene chloride-, and per- and polyfluoroalkyl substance-coated paper generate microplastics or fluorochemicals in the environment. Here, we report an approach for the development of oil-resistant papers using an environmentally friendly, fluorine-free, water-dispersible poly(dimethylsiloxane) (PDMS) coating on kraft paper. Carboxylic-functionalized PDMS (PDMS-COOH) was synthesized and subsequently neutralized with ammonium bicarbonate to obtain a waterborne emulsion, which was then coated onto kraft paper. The water resistance of the coated paper was determined via Cobb60 measurements. The Cobb60 value was reduced to 2.70 ± 0.14 g/m2 as compared to 87.6 ± 5.1 g/m2 for uncoated paper, suggesting a remarkable improvement in water resistance. Similarly, oil resistance was found to be 12/12 on the kit test scale versus 0/12 for uncoated paper. In addition, the coated paper retained 70–90% of its inherent mechanical properties, and more importantly, the coated paper was recycled via pulp recovery using a standard protocol with a 91.1% yield. [ABSTRACT FROM AUTHOR]

Curl propensity is a critical-to-quality (CTQ) property of paper, as it causes severe problems during printing and other final conversion operations. The main papermaking factor causing the curl phenomenon is the existence of a fiber orientation (FO) gradient across the thickness direction (or ZD), also known as two-sidedness. Therefore, a methodology that characterizes the FO across the ZD is fundamental for papermakers. In this work, we propose and validate an efficient and cost-effective protocol based on sheet splitting and image analysis. Besides assessing the level of FO two-sidedness, the methodology also provides insights into the flow dynamics in the draining zone of the forming section of the paper machine and the drying stresses built into the paper. This information is relevant for monitoring, optimizing, and troubleshooting activities in the paper industry. [ABSTRACT FROM AUTHOR]

This study investigates the impact of zirconium-based KZC series crosslinkers with varying zirconium contents and the polyamine-based crosslinker (PBC) on the properties of coated paper, focusing on key performance metrics such as viscosity, wet rub and pick resistance, dry pick resistance, gloss, brightness, ink set-off, and print mottle. The findings reveal that crosslinkers' type and concentration significantly influence the coating colors' viscosity, with PBC demonstrating lower low shear viscosity at lower concentrations. The KZC series showed stable viscosity across a zirconium content range of 7% to 20%, and both crosslinker types enhanced wet rub resistance at higher concentrations. Notably, the KZC series, particularly KZC7, exhibited superior wet pick resistance at increased concentrations, highlighting its effectiveness in enhancing the durability of the coating layer. All crosslinkers maintained excellent dry pick resistance, ensuring robust coating performance. While gloss and brightness were generally unaffected, KZC20, which had the highest zirconium content, slightly reduced these optical properties. Ink set-off tests indicated that the KZC series performed better at lower concentrations, whereas higher concentrations led to increased ink set-off, potentially due to over-crosslinking. Print mottle remained consistent across all crosslinkers, indicating uniform coating quality. Overall, the zirconium-based KZC series significantly enhances wet resistance and maintains high performance across various properties, though it may slightly reduce gloss and brightness and increase ink set-off at higher concentrations. PBC offers a balanced performance profile, emphasizing the need for careful crosslinker type and concentration optimization to achieve the desired coating properties for specific applications. This comprehensive evaluation provides valuable insights for developing and optimizing high-performance coated papers. [ABSTRACT FROM AUTHOR]

In most industrialized countries, power transformers built several decades ago are approaching the end of their operational lifespan. The ongoing energy transition, focused on developing 100% renewable energy sources and accelerating global transportation electrification, further exacerbates these assets. Combined with rising electricity demand, there is an increasing risk of critical transformers' degradation acceleration. In this context, understanding the aging mechanisms of the insulation system inside these essential assets, which form the core of every energy network, becomes paramount for today's managers and engineers responsible for their operations. The acids generated through oil oxidation can be classified into two categories: low molecular weight acids (LMAs), which are inherently more hydrophilic and consequently have a greater impact on the degradation rate of solid insulation through hydrolysis, and high molecular weight acids (HMAs), which do not significantly contribute to the degradation of paper insulation. This study specifically addresses the impact of acids generated through oil oxidation—focusing on LMAs. New oil samples were infused with different ratios of LMAs before impregnation. The impregnated paper samples underwent thermal aging at 115 °C. Different physicochemical and dielectric properties were investigated. The investigations revealed that oils blended with formic acid exhibited more adverse effects on the insulation system compared to other LMAs. This information is essential for industry professionals seeking to mitigate the risks associated with transformer degradation and extend the lifespan of these critical assets during the energy transition. [ABSTRACT FROM AUTHOR]

The aim of this study was to perform a bibliometric analysis to discover what topics of dental YouTube videos have been investigated by the scientific literature, and evaluate how video characteristics were related to citation count. The Scopus electronic literature database was accessed to identify relevant papers. After screening, a total of 128 papers entered the analysis. The bibliographic data were provided by Scopus, whereas content evaluations were manually performed. Most papers evaluated videos recorded in English (85.9%). Each of the 128 papers analyzed a mean (±SD) of 79.2 ± 61.6 videos. Mean journal impact factor was 1.8 ± 1.4, and mean citation count was 13.0 ± 22.4. The preference for publication of papers was inclined towards dental journals (80.5%), with the majority (54.7%) being published without open access. Papers dealing with videos targeting patients/public had higher citations than those targeting dental professionals only (14.1 ± 23.4 vs. 4.0 ± 6.3, p < 0.001). The most represented as well as the most highly cited specialty of the dental YouTube publications was oral and maxillofacial surgery/oral medicine. Some twin or triplet studies published in the same year covering the same topic were identified, but they often covered a different number of videos. [ABSTRACT FROM AUTHOR]

Paper relics, as carrieres of historical civilization's records and inheritance, could be severely acidic and brittle over time. In this study, the multi-functional dispersion of nanometer magnesium oxide (MgO) carried by 3-aminopropyl triethoxysilane-modified bacterial cellulose (KH550-BC) was applied in the impregnation process to repair aged paper, aiming at solving the key problems of anti-acid and strength recovery in the protection of ancient books. The KH550-BC/MgO treatment demonstrated enhanced functional efficacy in repairing aged paper, attributed to the homogeneous and stable distribution of MgO within the nanofibers of BC networks, with minimal impact on the paper's wettability and color. Furthermore, the treatment facilitated the formation of adequate alkali reserves and hydrogen bonding, resulting in superior anti-aging properties in the treated paper during prolonged preservation. Even after 30 days of hygrothermal aging tests, the paper repaired by KH550-BC/MgO was still in a gently alkaline environment (pH was about 7.56), alongside a 32.18% elevation compared to the untreated paper regarding the tear index. The results of this work indicate that KH550-BC/MgO is an effective reinforcement material for improving the long-term restoration of ancient books. [ABSTRACT FROM AUTHOR]

This manuscript offers a concise overview of paper microfluidics, emphasizing its sustainable sensing applications in healthcare, environmental monitoring, and food safety. Researchers have developed innovative sensing platforms for detecting pathogens, pollutants, and contaminants by leveraging the paper's unique properties, such as biodegradability and affordability. These portable, low-cost sensors facilitate rapid diagnostics and on-site analysis, making them invaluable tools for resource-limited settings. This review discusses the fabrication techniques, principles, and applications of paper microfluidics, showcasing its potential to address pressing challenges and enhance human health and environmental sustainability. [ABSTRACT FROM AUTHOR]

This study investigates the physical, mechanical, and structural characteristics of handmade paper samples derived from cellulose extracted from grass clippings using two distinct methods as follows: (1) alkali treatment and (2) alkali treatment followed by bleaching, coupled with the incorporation of barium sulfate as a mineral filler. Our investigation revealed that the handmade paper samples' densities, moisture contents, and thicknesses varied within the ranges of 0.436 to 0.549 g/cm3, 5.60 to 2.51%, and 0.41 to 0.50 mm, respectively. The tensile strength and folding endurance of the papers produced through alkali treatment with barium sulfate were notably superior to those produced from bleached pulp and barium sulfate. Our analysis indicates that several critical factors, including paper density, thickness, the crystallinity index, and the microfibrillar structure of cellulose, intricately influence the mechanical and strength properties of the samples. Using Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques, we identified characteristic cellulose bonds and examined cellulose's crystalline and amorphous phases. Additionally, the crystallinity index of the samples was determined using both the Segal and peak deconvolution methods. Scanning electron microscopy (SEM) micrographs revealed interconnected networks of cellulose fibers with varying thicknesses and lengths, along with incorporated mineral filler within the cellulose fiber structure. Variations in mineral particle retention were attributed to the presence or absence of cellulose microfibrils. These findings contribute to our understanding of the observed strength characteristics of the paper samples and underscore the potential applications of cellulose derived from grass clippings, especially when combined with barium sulfate as a mineral filler in paper production. [ABSTRACT FROM AUTHOR]

Simple Summary: This study emphasizes the significance of appropriate air-drying times in toxicity bioassays to accurately establish sublethal concentrations and discriminating concentrations for resistance detection in mosquitoes to a highly volatile pyrethroid, namely, transfluthrin. The high-throughput screening system toxicity bioassay study demonstrated consistent dose-dependent responses in susceptible mosquito populations. Our findings emphasize the importance of accurate susceptibility testing to facilitate early resistance detection. The air-drying duration significantly affected the efficacy of transfluthrin: after drying for 24 h, the concentration needed to achieve the same level of efficacy was 2.8 times higher compared to the concentration needed after 1 h of drying. This is the first study to evaluate spatial repellents using a high-throughput screening system toxicity bioassay, yielding precise sublethal concentrations and discriminating concentrations for varying air-drying times of transfluthrin-treated filter papers. The study underscores the importance of early detection of resistant mosquito populations and emphasizes the need to optimize air-drying durations in toxicity bioassays. Selecting the right concentrations and assessing behavioral responses are crucial for developing effective mosquito control strategies with spatial repellents. This research enhances our understanding of resistance dynamics and provides guidance for practical implementation in vector control programs. Increasing temperature can enhance the geographical spread and behavior of disease vector mosquitoes, exposing vulnerable populations to Aedes-borne viruses and infections. To address this risk, cost-effective and sustained intervention vector control tools are required, such as volatile pyrethroid spatial repellents. This study used a high-throughput screening system toxicity bioassay to determine the discriminating concentrations of transfluthrin-treated filter papers with variable air-drying times exposed to pyrethroid-susceptible Aedes aegypti mosquitoes. At the highest transfluthrin concentration (0.01706%), a significant reduction in mosquito mortality was observed in filter papers air-dried for 24 h compared to those air-dried for 1 h (odds ratio = 0.390, p < 0.001, 95% confidence interval: 0.23–0.66). Conversely, no significant difference in mortality was found between filter papers air-dried for 1 h and those air-dried for 12 h (odds ratio = 0.646, p = 0.107, 95% confidence interval: 0.38–1.10). The discriminating concentration was 2.8-fold higher for transfluthrin-treated filter papers air-dried for 24 h than it was for papers air-dried for 1 h, and it increased 5-fold from 1 h to 336 h of air-drying. These results show that the optimal air-drying period of transfluthrin-treated filter paper is critical, as higher discriminating concentration values may lead to underestimations of insecticide resistance. The instability of transfluthrin-treated papers necessitates the use of the World Health Organization (WHO) bottle bioassay, which is the preferred method for determining mosquito susceptibility to volatile insecticides. [ABSTRACT FROM AUTHOR]

Excessive emissions of heavy metals not only cause environmental pollution but also pose a direct threat to human health. Therefore, rapid and accurate detection of heavy metals in the environment is of great significance. Herein, we propose a method based on laser-induced breakdown spectroscopy (LIBS) combined with filter paper modified with bovine serum albumin-protected gold nanoclusters (LIBS-FP-AuNCs) for the rapid and sensitive detection of Cr3+ and Mn2+. The filter paper modified with AuNCs was used to selectively enrich Cr3+ and Mn2+. Combined with the multi-element detection capability of LIBS, this method achieved the simultaneous rapid detection of Cr3+ and Mn2+. Both elements showed linear ranges for concentrations of 10–1000 μg L−1, with limits of detection of 7.5 and 9.0 μg L−1 for Cr3+ and Mn2+, respectively. This method was successfully applied to the determination of Cr3+ and Mn2+ in real water samples, with satisfactory recoveries ranging from 94.6% to 105.1%. This method has potential application in the analysis of heavy metal pollution. [ABSTRACT FROM AUTHOR]

In this study, we designed three promising platforms based on metal–organic frameworks (MOFs) to develop paper-based analytical devices (PADs) for biosensing applications. PADs have become increasingly popular in field sensing in recent years due to their portability, low cost, simplicity, efficiency, fast detection capability, excellent sensitivity, and selectivity. In addition, MOFs are excellent choices for developing highly sensitive and selective sensors due their versatility for functionalizing, structural stability, and capability to adsorb and desorb specific molecules by reversible interactions. These materials also offer the possibility to modify their structure and properties, making them highly versatile and adaptable to different environments and sensing needs. In this research, we synthesized and characterized three different amino-functionalized MOFs: UiO-66-NH2 (Zr), MIL-125-NH2 (Ti), and MIL-101-NH2 (Fe). These MOFs were used to fabricate PADs capable of sensitive and portable monitoring of alkaline phosphatase (ALP) enzyme activity by laser-induced fluorescence (LIF). Overall, amino-derivated MOF platforms demonstrate significant potential for integration into biosensor PADs, offering key properties that enhance their performance and applicability in analytical chemistry and diagnostics. [ABSTRACT FROM AUTHOR]

Developing highly efficient and stable electrocatalysts for urea electro-oxidation reactions (UORs) will improve wastewater treatment and energy conversion. A low-cost cobalt sulfide-anchored nickel sulfide electrode (CoS/Ni3S2@CP) was synthesized by electrodeposition in DMSO solutions and found to be highly effective and long-lasting. The morphology and composition of catalyst surfaces were examined using comprehensive physicochemical and electrochemical characterization. Specifically, CoS/Ni3S2@CP electrodes require a potential of 1.52 volts for a 50 mA/cm2 current, confirming CoS in the heterointerface CoS/Ni3S2@CP catalyst. Further, the optimized CoS/Ni3S2@CP catalyst shows a decrease of 100 mV in the onset potential (1.32 VRHE) for UORs compared to bare Ni3S2@CP catalysts (1.42 VRHE), demonstrating much greater performance of UORs. As compared to Ni3S2@CP, CoS/Ni3S2@CP exhibits twofold greater UOR efficiency as a result of a larger electroactive surface area. The results obtained indicate that the synthetic CoS/Ni3S2@CP catalyst may be a favorable electrode material for managing urea-rich wastewater and generating H2. [ABSTRACT FROM AUTHOR]

Background: As the demand for digital dentistry constantly increases, digital devices are gradually replacing conventional methods of recording occlusal contacts. The study aimed to assess the inter-rater reliability of occlusal contact point detection using 40 μm articulating paper, Medit i700, and OccluSense and to compare the distribution of occlusal contacts using the articulating paper and intraoral scanner. Material and Methods: The study included 25 participants aged 20 to 30 (13 women and 12 men). Photographs of contact points were taken and marked in maximum intercuspal position (MIP), in protrusive and laterotrusive movements, on working and non-working sides using 40 μm articulating paper and digital devices. The Cohen's Kappa coefficient assessed the inter-rater reliability. The Wilcoxon signed-rank test was used to compare dependent groups, articulating paper, and Medit i700. Results: The Cohen's Kappa index showed that almost perfect agreement was achieved with 40 μm articulating paper. Compared to Medit i700, the 40 μm articulating paper showed an increased mean number of contacts per tooth, except for the third molars. Conclusions: The 40 μm articulating paper has detected more overall contacts than the digital devices, particularly in the posterior areas. An ideal method for registering occlusal contacts has not been established yet. [ABSTRACT FROM AUTHOR]

For a wide range of applications, paper materials require effective protection against the destructive effect of water, which is most effectively realized by superhydrophobic coatings. In recent years, a considerable amount of scientific research has been carried out in this area, focusing particularly on biogenic resources. With this contribution, we go one step further and examine how biogenic materials can be transferred into aqueous dispersions and coated onto paper via existing technologies. With this paper coating, based on a hydrophobic cellulose derivative in combination with a structurally similar wax, thermally regenerable flower-like surface morphologies are obtained via self-assembly, where the hydrophobic cellulose polymer acts as a structural template for the co-crystallization of the wax component. Such hydrophobic structures in the low micrometer range ensure perfectly water-repellent paper surfaces with contact angles > 150° starting from coating weights of 5 g/m2. The dispersion can be successfully applied to a variety of commercially available paper substrates, whereby the effects of different roughness, porosity, and hydrophobicity were investigated. In this context, a certain roughness of the base paper (Sa ~ 1.5–3 µm) was found to be beneficial for achieving the highest possible contact angles. Furthermore, the approach proved to be paper process-compatible, recyclable, and regenerable, whereby the processing temperatures allow the coating properties to be thermally generated in situ. With this work, we demonstrate how biogenic waxes are very well suited for superhydrophobic, regenerative coatings and, importantly, how they can be applied from aqueous coatings, enabling simple transfer into the paper industry. [ABSTRACT FROM AUTHOR]

Paper documents are an important carrier of information related to human civilization, with the reinforcement and protection of fragile paper documents being a key aspect of their protection. This research utilized amphoteric polyvinylamine polymer as a paper reinforcement agent, strengthening the Xuan paper commonly used in paper documents. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), solid-state 13C NMR, and other analytical methods were employed to compare the physical properties, micro-morphology, crystallinity, and aging resistance of the paper before and after reinforcement. Research was conducted on the effects of reinforcement, the aging resistance, and the effects on the fiber structure. The results indicate that polyethylenimine has a filling and bridging effect between the paper fibers. After treatment with polyethylenimine, there was a significant improvement in the folding endurance and tensile strength of the paper. Additionally, the paper maintains a good mechanical strength even after undergoing dry heat and humid aging. [ABSTRACT FROM AUTHOR]

This research explores the potential of agricultural waste, specifically flax straw, as a sustainable raw material for eco-friendly packaging materials. This study investigates a three-stage delignification process involving nitric acid, alkaline treatment, and organosolvent solutions. This method effectively removes lignin from the straw, resulting in high-quality technical pulp with 67.7% α-cellulose and a significantly reduced ash content (8.5%). X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were employed to characterize the treated flax straw. XRD analysis revealed changes in the cellulose structure, while TGA indicated enhanced thermal stability compared to untreated straw. Microscopic analysis of the pulp fibers shows a parallel and aligned arrangement, suggesting a high fiber content and a strong paper lattice. The particle size distribution of the ground pulp, influenced by fiber size, has implications for the packing density and mechanical properties of the final product. This study demonstrates the potential of agricultural waste as a sustainable source for packaging materials, contributing to the circular economy and waste reduction. [ABSTRACT FROM AUTHOR]

In recent years, the demand for the protection and restoration of cultural heritage has become increasingly urgent. Particularly for paper-based cultural relics such as ancient books and paintings, their restoration is especially important due to their unique nature and susceptibility to environmental damage. Among various restoration materials, calcium hydroxide (Ca(OH)2) has been widely studied and applied in the protection of paper-based cultural relics. However, commercial Ca(OH)2 materials have issues such as a large particle size and slow carbonation. In order to address these issues, this study employed carboxymethyl cellulose (CMC) as a support, on which nano-sized Ca(OH)2 crystals were grown in situ on its surface, followed by loading with TiO2 nanoparticles, successfully preparing a multifunctional paper-based cultural relic restoration material with reinforcement, deacidification, anti-aging, and antimicrobial properties. It is worth noting that by in situ growing Ca(OH)2 on the surface of CMC, particle size control, uniform dispersion, and the fixation of Ca(OH)2 can be achieved. CMC is used to enhance the mechanical strength of the paper, Ca(OH)2 is used for deacidification, and TiO2 is used for anti-aging and antimicrobial purposes. This study provides a new approach and method for the restoration of paper-based cultural relics, simplifying traditional multi-step processes and avoiding potential impacts on the cultural relics from multiple repairs. [ABSTRACT FROM AUTHOR]

New biodegradable paper-based films are a hot research topic in the development of green agriculture. In this study, a black paper-based film coated with cooked tung oil with excellent mechanical properties, a hydrophobic surface, high heat transfer and strong weather resistance was prepared by spraying high-pigment carbon black solution on the surface of base paper. The results showed that the surface-solidified oil film had a rough structure produced via the brush coating process using cooked tung oil. The base film of the black paper had a given hydrophobic structure, and the contact angle reached 98.9°. Cooked tung oil permeates into the inside of the paper base, and after curing, it forms a multi-dimensional network film structure. The maximum tensile stress of the black paper base film is about 123% higher than that of the original paper base film. The coloring of carbon black gives the black paper base film a heat conduction effect, and the average heat transfer rate reaches 15.12 °C/s. Cooked tung oil is combined with the paper-based fiber high-toughness layer to form a stable system. The existence of a cured film improves the basic mechanics and hydrophobicity, and the resistance to ultraviolet radiation and hot air is greatly improved. This study provides a feasible scheme for the application of a black paper base film coated with cooked tung oil. [ABSTRACT FROM AUTHOR]

The environmental performance of tissue paper varies greatly based on factors such as the type of fibre used as the raw material, the production process and the fuels used to meet the energy requirements. One possible strategy to decrease greenhouse gas emissions in tissue production is the integration of pulp and paper mills and their energy systems at the same site. However, the environmental trade-offs associated with this strategy are still unclear. Therefore, this study aimed (i) to assess for the first time the environmental impacts of tissue paper produced at a typical industrial site in Portugal using slush and market pulp as the main raw material, and (ii) to assess the environmental effects of the integration of bioenergy produced in the pulp mill in tissue production. A life cycle assessment was conducted from cradle to gate using real data from the production of eucalyptus wood, eucalyptus pulp and tissue paper. The results showed that energy consumption in tissue paper production is the main hotspot for most impact categories. When bioenergy is used in tissue production, the environmental impacts decrease by up to 20% for categories other than marine eutrophication and mineral resource scarcity. These results are relevant to support decision making concerning sustainable practices not only for the pulp and paper industry but also for the authorities in charge of defining environmental policies, incentives and tax regulations. [ABSTRACT FROM AUTHOR]

A new type of laminated flooring decorated by resin impregnated paper (LWFWRIP) was designed, with the advantages of low formaldehyde emission, improved flame retardant, and high wear resistance. The structure of this new type of wood flooring is based on the ordinary laminated flooring, followed by a decorative layer of thin wood pieces, and then the transparent improved flame retardant, wear-resistant paper is added to the top. It is found that the hot-pressing temperature is the most significant factor affecting the adhesion of resin impregnated paper. The optimal hot-pressing parameters are selected as the hot-pressing pressure of 3.5 MPa, hot-pressing temperature of 180 °C, and hot-pressing time of 40 s. The new laminated flooring was improved with high flame retardant, high wear-resistant, combined with the conventional advantages of both solid wood composite flooring and reinforced wood flooring. The new laminated flooring decorated by resin impregnated paper has broad application prospects. [ABSTRACT FROM AUTHOR]

Water-repellent coatings are essential for enhancing the durability and sustainability of textiles, paper, and bioplastic polymers. Despite the growing use of sustainable materials, their inherent hydrophilicity presents significant challenges. This review explores advanced coating technologies to address these issues, focusing on their mechanisms, properties, and applications. By imparting water resistance and repellency, these coatings improve material performance and longevity. The environmental impact and limitations of current coatings are critically assessed, highlighting the need for sustainable solutions. This review identifies key trends and challenges, offering insights into developing water-resistant materials that align with environmental goals while meeting industry demands. Key focus areas include coating mechanisms, techniques, performance evaluation, applications, environmental impact assessment, and the development of sustainable coating solutions. This research contributes to the development of water-resistant materials that meet the demands of modern industries while minimizing environmental impact. [ABSTRACT FROM AUTHOR]

In this paper, we developed a paper-based fluorescent sensor using functional composite materials composed of graphene quantum dots (GQDs) coated with molecularly imprinted polymers (MIPs) for the selective detection of tetracycline (TC) in water. GQDs, as eco-friendly fluorophores, were chemically grafted onto the surface of paper fibers. MIPs, serving as the recognition element, were then wrapped around the GQDs via precipitation polymerization using 3-aminopropyltriethoxysilane (APTES) as the functional monomer. Optimal parameters such as quantum dot concentration, grafting time, and elution time were examined to assess the sensor's detection performance. The results revealed that the sensor exhibited a linear response to TC concentrations in the range of 1 to 40 µmol/L, with a limit of detection (LOD) of 0.87 µmol/L. When applied to spiked detection in actual water samples, recoveries ranged from 103.3% to 109.4%. Overall, this paper-based fluorescent sensor (MIPs@GQDs@PAD) shows great potential for portable, multi-channel, and rapid detection of TC in water samples in the future. [ABSTRACT FROM AUTHOR]

The sustainable use of natural resources is becoming an increasingly important issue today. Stone paper, produced as an alternative to cellulose-based paper from the forest, is rich in minerals and produced without cellulose and water. This study focuses on the behavior of screen-printing ink on two different papers, stone paper and coated sticker paper. Properties such as ink adhesion, rubbing resistance, optical printing ink density, ink consumption, and lightfastness were measured on these surfaces. Solvent- and UV-based inks were used, and printing was carried out on cellulose-based (coated sticker paper) and mineral-based (stone paper) paper layers using three different mesh counts (90, 120, and 140 tpc). The rubbing resistance and lightfastness of the papers were also measured. The present findings revealed that stone paper had the same printability properties as cellulose-based paper. The study concluded that using a 140 tpc mesh with both types of ink results in a high-lightfastness ink layer and lower ink consumption. UV-based inks exhibited high rub resistance across all mesh counts. Additionally, when printing with stone paper, there will be a reduction in ink consumption, thereby achieving cost savings. Based on the present findings, it was concluded that water- and oil-resistant stone paper can be considered an essential alternative in many fields, including the printing industry. [ABSTRACT FROM AUTHOR]

As a significant biomarker during the apoptosis process, cytochrome c (Cyt c) is considered as a critical component in the inherent apoptotic pathway, but the simple and portable detection still remains challengeable. In this work, a portable and visual sensing platform for Cyt c was developed based upon the fluorescence quenching of graphene quantum dots (GQDs), which could be finished within a few seconds. Herein, the absorption spectrum of Cyt c matched the emission spectrum of GQDs well, which could cause the fluorescence quenching of GQDs via the inner filter effect (IFE) in the range of 1–50 μg/mL with the limit of detection as low as 0.1 μg/mL. Furthermore, the intracellular Cyt c was imaged to observe the apoptosis process of cancer cells induced by staurosporine. To achieve the portable and visual detection of Cyt c, GQDs were deposited on the filter paper to form the solid platform, which displayed a gradual fluorescence quenching when different concentrations of Cyt c were present. Compared to the conventional methods, the proposed assay is low-cost, fast, portable, and visual, which will be useful for the investigation of mitochondrial dysfunction and apoptotic cell death. [ABSTRACT FROM AUTHOR]

The present study is an evaluation of published papers on machine learning as employed in mastitis research. The aim of this study was the quantitative evaluation of the scientific content and the bibliometric details of these papers. In total, 69 papers were found to combine machine learning in mastitis research and were considered in detail. There was a progressive yearly increase in published papers, which originated from 23 countries (mostly from China or the United States of America). Most original articles (n = 59) referred to work involving cattle, relevant to mastitis in individual animals. Most articles described work related to the development and diagnosis of the infection. Fewer articles described work on the antibiotic resistance of pathogens isolated from cases of mastitis and on the treatment of the infection. In most studies (98.5% of published papers), supervised machine learning models were employed. Most frequently, decision trees and support vector machines were employed in the studies described. 'Machine learning' and 'mastitis' were the most frequently used keywords. The papers were published in 39 journals, with most frequent publications in Computers and Electronics in Agriculture and Journal of Dairy Science. The median number of cited references in the papers was 39 (interquartile range: 31). There were 435 co-authors in the papers (mean: 6.2 per paper, median: 5, min.–max.: 1–93) and 356 individual authors. The median number of citations received by the papers was 4 (min.–max.: 0–70). Most papers (72.5%) were published in open-access mode. This study summarized the characteristics of papers on mastitis and artificial intelligence. Future studies could explore using these methodologies at farm level, and extending them to other animal species, while unsupervised learning techniques might also prove to be useful. [ABSTRACT FROM AUTHOR]

Background: The pulp and paper industry (P&PI) is undergoing significant disruption driven by global megatrends that necessitate advanced tools for predicting future behavior and adapting strategies accordingly. Methods: This work utilizes a multi-criteria framework to quantify the effects of digitalization, changes in social behavior, and sustainability as three major megatrends transforming the P&PI industry, with a specific focus on hygiene tissue products. Thus, the research combines a comprehensive literature review, insights from a Delphi study, and topic modeling to qualitatively and quantitatively assess the present and future impacts of these global megatrends. Results: The findings suggest an urgent need to identify alternative raw materials to prevent potential supply chain disruptions. Moreover, due to shifts in social behavior, it becomes critical for businesses to substantiate their sustainability claims with hard data to avoid the risk of a "greenwashing" perception among consumers. Conclusions: This study provides decision support for strategic planning by highlighting actionable insights, quantitative predictions, and trend analysis, alongside the examination of consumer and market trends. It aims to incorporate diverse stakeholder perspectives and criteria into decision-making processes, thereby enriching the strategic planning and sustainability efforts within the P&PI industry. [ABSTRACT FROM AUTHOR]

Environmental pollution is a significant problem and is increasing gradually as more and more harmful pollutants are being released into water bodies and the environment. Water pollutants are dangerous and pose a threat to all living organisms and the ecosystem. Paper waste is one of the most widespread and largest wastes in the world. This research aims to address two important problems simultaneously: the reduction in solid waste in the environment using activated carbon from paper waste as potential adsorbents and the removal of harmful contaminants from water. Carbon from paper waste was activated with H2O2, HNO3, and KMnO4 for the adsorption of Cr(VI) and MB. SEM, EDX, FTIR, Raman, and BET were used to determine the properties of the materials. The surface morphology of the materials consisted of amorphous particles. EDX shows that all activated samples have a higher content of (O) than carbon paper waste. Adsorption studies showed that there was a stronger interaction between the pollutants and the adsorbent at a higher initial concentration (200 mg/L) than at the lower initial concentrations. The contact time data show that uptake increases when the interaction time between the contaminant and the adsorbent is increased. The tests for the pH of the solution show that the adsorption of Cr(VI) decreases when the pH is gradually increased, whereas the adsorption of MB increases when the pH of the solution is increased. The results fit better with the Freundlich isotherm and PSO models. The temperature studies show that the enthalpy was positive, indicating that the uptake process is endothermic. The Gibbs free energy values were all negative, indicating that adsorption between the adsorbents and the pollutants was favored. After four consecutive cycles, all the samples retained more than 60% of their uptake capability. [ABSTRACT FROM AUTHOR]

Many plant materials in nature have the ability to change their shape to respond to external stimuli, such as humidity or moisture, to ensure their survival or safe seed release. A well-known example for this phenomenon is the pinecone, which is able to open its scales at low humidity due to the specific bilayer structures of the scale. Inspired by this, we developed a novel humidity-driven actuator based on paper. This was realized by the lamination of untreated paper made from eucalyptus fibers to a paper–carboxymethyl cellulose (CMC) composite. As observed, the hygroexpansion of the composite can be easily controlled by the amount of CMC in the impregnated paper sheet, which, thus, controls the morphologic deformation of the paper bilayer. For a more detailed understanding of these novel paper soft robots, we also studied the dynamic water vapor adsorption, polymer distribution and hygroexpansion of the paper–polymer composites. Finally, we applied a geometrically nonlinear finite element model to predict the bending behavior of paper bilayers and compared the results to experimental data. From this, we conclude that due to the complexity of structure of the paper composite, a universal prediction of the hygromorphic behavior is not a trivial matter. [ABSTRACT FROM AUTHOR]

As air pollution escalates, the need for air filters increases. It is better that the filters used be based on natural fibers, such as non-wood fibers, which cause low damage to the environment. However, the short fiber lengths, low apparent densities, and high volumes of non-wood materials can make it challenging to prepare filter paper with the required mechanical and physical properties. In that context, this study focused on utilizing bamboo fibers to fabricate filter paper by employing the anthraquinone soda pulping method. The pulp underwent bleaching and oxidation processes, with the incorporation of cationic starch (CS) and polyvinyl alcohol (PVA) to enhance resistance properties, resulting in the creation of handmade filter papers. The findings revealed that the tear, burst, and tensile strength of filter paper increased with the oxidation and addition of CS and PVA. Air permeability increased with addition of PVA and combination of CS and PVA. FTIR demonstrated the conversion of hydroxyl groups in cellulose chains to carboxyl groups due to oxidation. SEM images illustrated alterations in the fiber structure post-oxidation treatment, with CS reducing pores while PVA and the CS-PVA combination enlarged pore size and enhanced porosity. The BET surface area surface area expanded with oxidation and the addition of the CS-PVA blend, indicating heightened filter paper porosity. Notably, the combined inclusion of CS and PVA not only augmented mechanical strength but also increased porosity while maintaining pore size. [ABSTRACT FROM AUTHOR]

As a prescription drug, retinoic acid is listed as a banned cosmetic additive in the EU and China regulations. Currently, spectrophotometric methods, including thin-layer chromatography (TLC), high-performance liquid chromatography (HPLC), and HPLC–MS/MS, are commonly used for the determination of retinoic acid. As these conventional methods require complex pretreatment and are time-consuming, chemical derivatization combined with paper spray ionization mass spectrometry was developed for the fast detection of retinoic acid in cosmetics. N,N-dimethylpiperazine iodide (DMPI) was utilized as a derivatization reagent. Carboxylic acid in retinoic acid was derivatized to carry a positive charge and was subjected to mass spectrometry analysis. Results showed that compared with non-derivatized compounds, the detection limit was increased by about 50 times. The linearity in the range of 0.005–1 μg·mL−1 was good. The limit of detection (LOD) was 0.0013 μg·mL−1, and the limit of quantification (LOQ) was 0.0043 μg·mL−1. The recoveries of spiked samples were in the range of 95–105%, and the RSDs were below 5%. Derivatization and paper spray ionization MS render a quick, sensitive, and accurate method for the detection of retinoic acid in a complex matrix. [ABSTRACT FROM AUTHOR]

In this study, the integration of paper industry waste with high cellulose content into biocomposites of polylactic acid (PLA), a widely used biobased polymer material, was investigated. The PLA/waste biocomposite samples (0–25 wt.%) were manufactured using the extrusion and injection moulding techniques. The mechanical test results showed improvements in terms of tensile properties and a decrease in impact strength as the percentage of residue increased. The melting temperature decreased, and the crystallinity increased in all biocomposites according to the Differential Scanning Calorimetry (DSC) analysis. Water absorption increased proportionally with the percentage of residue, attributed to the higher cellulose content in the biocomposites, determined by Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques. The scanning electron microscopy (SEM) fracture analysis demonstrated effective reinforcement–matrix cohesion, supporting the previously observed behaviour of the analysed materials. This work highlights the potential of using waste from the paper industry as reinforcement in PLA matrices, opening new perspectives for sustainable applications in the framework of the manufacture of composite materials. [ABSTRACT FROM AUTHOR]