Search

This paper examines the feasibility of extracting cellulose from tissue paper wastes (TPW’s) using several methods: sonication (SC), subcritical (SU), microwave (MC), and microwave with diluted acid (MA). The chemical characterisation and morphological properties of nanocrystal cellulose were investigated using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and scanning electron microscopy with energy dispersive X-Ray analysis (SEM-EDX). TPW’s have a relatively high crystallinity index (CrI = 61.02%). It was found to be lower than that for cellulose extracted using SU and SC MC, MA methods, where CrI to 65.65%, 68.07%, 69.21% and 73.42%, respectively. The MA method yielded cellulose with the highest CrI and altered surface morphology. This cellulose was selected for cellulose acetate synthesis. After acetylation, the CrI decreased to 61.45%, and the morphological aspect was changed. In conclusion, nanocrystal cellulose was successfully extracted from TPW’s and effectively changed to its esterified form. [ABSTRACT FROM AUTHOR]

Conference proceedings are valuable sources for research, providing insights into individual or organisational projects. Australian library and information services (LIS) professionals have the opportunity to contribute to a robust conference culture, including the biennial library technology VALA conference. Practice-driven conferences can offer interpretations of LIS practitioner experiences, however, there is limited research focusing on Australian LIS conference proceedings. The VALA conference papers offer a unique record of technology's impact, influence, and implementation in Australian LIS organisations over the last forty years. This article will outline the objective and methodology of an ongoing research project undertaking historical analysis of VALA conference papers. The research project seeks to examine key themes, theories, and tools discussed in VALA conference papers and will attempt to identify if evolving technology influences the practices and attitudes of Australian LIS practitioners. The article will identify the research methods and the content analysis techniques that will be used in the project, and present preliminary results from a pilot study presented at the 2023 RAILS conference. [ABSTRACT FROM AUTHOR]

This study evaluates the impact of sales promotions that are featured in store flyers distributed by prominent retailers and their capacity to attract consumers to their establishments. A distinctive conceptual framework is introduced that scrutinizes the influence of ethically-minded consumer behavior, digital citizenship/literacy, and a retailer's orientation toward environmental sustainability and explicit ecological concerns. A quasi-experimental design was used to formulate four distinct scenarios from a possible set of eight, stemming from the combinations of three variables: 2 Retailer Positioning (green vs. without explicit ecological claims) × 2 Flyer Mediums (paper vs. digital) × 2 Discount Levels (5% discount vs. 30% discount). Through an online survey, a sample of 269 responses was garnered to gauge consumer reactions to these store flyers, evaluating their attitudes and receptiveness. The findings suggest that attitudes toward paper flyers were more favorable when presented by non-green retailers compared to their green counterparts. This can be attributed to a perceived inconsistency between a green brand positioning and the use of paper flyers. Furthermore, the propensity to transition to digital flyers was notably stronger for green retailers compared to non-green retailers, but this inclination was most pronounced when higher discounts were offered. [ABSTRACT FROM AUTHOR]

Stanley Kubrick's project on the Holocaust, Aryan Papers, was dear to his heart. He worked on it for a long time, but he could not, in the end, bring himself to complete the planned film. This article canvasses some of the reasons other scholars have supplied for this film remaining unmade, including the notion that the Holocaust is unrepresentable. However, it points to a novel explanation. I argue that Kubrick's plot modifications, particularly to the conclusion, doomed the project. Specifically, Kubrick has a Jewish woman take revenge for war-time atrocities. Discussing revenge in relation to the Holocaust has until recently been as impious as representing the Holocaust itself. Jewish revenge was unfashionable in Holocaust films of all kinds when Kubrick was working on Aryan Papers in the early 1990s. Kubrick's planned film was generically ahead of its times. The vengeful Jewish woman had to wait for Inglourious Basterds in 2009. [ABSTRACT FROM AUTHOR]

This article asks why Stanley Kubrick's longstanding wish to direct the film version of Louis Begley's 1991 novel Wartime Lies never came to fruition. In Begley's novel, the protagonist Maciek recounts the experience of living in hiding under a false identity in Nazi-occupied Poland. Kubrick drafted a series of quite different plotlines and conclusions for the film version, to be called Aryan Papers, in which Maciek's aunt Tania takes a highly dramatic role in their destiny. The more Kubrick changed Aryan Papers, in response to the pressure of Hollywood expectations and the cultural valorization of active Holocaust resistance, the less it resembled the very work he had chosen to adapt. This impasse shows why the director could not ultimately bring Aryan Papers to the screen. [ABSTRACT FROM AUTHOR]

The International Paper Conservation Seminar has now been held as four face-to-face events and four online events. It is a three-day international event delivered in Spanish and Portugese with keynote talks from national and international conservation professionals from Mexico to Chile presenting projects covering works on paper in diverse formats including documents, photographs historic books, and artworks. Countries such as Argentina, Chile, Bolivia, Peru, Ecuador, Mexico, Paraguay, Uruguay, Colombia, Brazil, Spain and Costa Rica have sent delegates to discuss both the social and cultural aspects of conservation work. The seminar is a completely free event for its attendees. It is intended to be suitable for all, with high-level talks addressing issues of management, preservation, conservation, restoration and disaster recovery among many others. From the third event onwards, training workshops for basic treatments have been developed, with the participation of recognized conservation professionals from universities and international institutes, allowing the number of attendees to remain constant since the Covid-19 pandemic. It creates networks and fosters collaboration for professional and institutional projects. The seminars have generated a connected and active community of paper conservators in the region, aware of our limitations, and capable of solving problems collaboratively and according to local resources. [ABSTRACT FROM AUTHOR]

AbstractResearchers face the challenge of efficiently navigating vast scientific literature while valuing printed papers in the digital age. Printed materials facilitate deeper engagement and comprehension, leading to active reading engagement and enhanced retention. However, existing digital tools often need to pay more attention to the needs of researchers who value the tactile benefits of printed documents. In response to this gap, we introduce AR-PaperSync, a solution that leverages Augmented Reality (AR) and cross-device interaction technology. AR-PaperSync integrates the physical experience of printed papers with the interactive capabilities of digital tools. Researchers can navigate inline citations, manage saved references, and synchronize reading notes across mobile, desktop, and printed paper formats. Our user-centric approach, informed by in-depth interviews with six researchers, ensures that AR-PaperSync is tailored to its target users’ needs. A comprehensive user study involving 28 participants evaluated AR-PaperSync’s significantly enhanced efficiency, accuracy, and system usability and reduced cognitive load in academic reading tasks compared to conventional methods. These findings suggest that AR-PaperSync enhances the reading experience of printed scientific papers and provides a seamless integration of physical and digital reading environments for researchers. [ABSTRACT FROM AUTHOR]

The complex mixture of pollutants found in industrial effluents creates a significant environmental challenge. Enzymatic treatment offers a promising alternative to traditional physiochemical techniques. With an emphasis on laccase enzymes, this review examines the potential of both free and immobilized biocatalysts for the treatment of industrial wastewater, especially from pulp and paper mills. Laccase has become one of the most popular options for bioremediation because of its broad substrate specificity and capacity to break down different kinds of organic pollutants. The different methods of laccase immobilization, including adsorption, encapsulation and cross-linking are examined, exploring their advantages and limitations. The benefits of immobilization for enzyme stability, reusability and operational efficiency in wastewater treatment processes are further discussed. By comparing the advantages and limitations of free and immobilized biocatalysts, this review aims to provide valuable insights for the development of efficient and sustainable enzymatic strategies for industrial wastewater treatment. Furthermore, this paper offers future possibilities for using biocatalyst in pulp and paper waste treatment. [ABSTRACT FROM AUTHOR]

The primary heat transfer source in the conventional multi-cylinder drying of paper and board is conduction. Conduction is facilitated by high-tension contact with steam-heated cylinders, while convective drying, the main mass transfer source, operates as heated air flows over the article web in the pockets. This conduction process occurs at elevated temperatures and contact pressures to ensure effective contact between the wet paper web and the heated cylinders. The contact pressures and temperatures of the hot surface significantly influence the conductive drying characteristics. This research paper presents an experimental study that involves designing a simple lab-scale setup with in-situ and continuous sensing capabilities for various commercially available grades of paper and board. Embedded thermocouples measure the temperatures of the heated platen and the sheet, allowing the collection of flux data to determine heat transfer characteristics. The goal of this study is to ascertain the instantaneous contact coefficients for different basis weights as a function of moisture content. The acquired data will provide valuable insights and information toward process development, design, and simulation of the article drying process. [ABSTRACT FROM AUTHOR]

Objectives. This study aimed to investigate 12-month and 7-day prevalence of musculoskeletal symptoms among workers of the pulp and paper industry, and assess the contribution of age, gender, body mass index (BMI) and physical activity (PA). Methods. The sample comprised 904 workers. Musculoskeletal symptoms were assessed using the Nordic musculoskeletal questionnaire. χ2 tests assessed the association between musculoskeletal symptoms and age/gender/BMI/PA, and multivariate logistic regression models predicted the 12-month occurrence of symptoms in the five most prevalent regions. Results. The five most affected body regions were the lower back, shoulders, neck, knees and wrists/hands. Older workers presented more symptoms in all body regions, except dorsal; female gender was associated with neck symptoms (p = 0.001); overweight was associated with a higher prevalence of lower back (p = 0.01), knee (p = 0.017) and ankle/foot (p = 0.037) symptoms; and a moderate PA level was associated with thigh/hip symptoms (p = 0.006). Age was a significant predictor in all five most affected regions; gender was a significant predictor for shoulders, neck and wrists/hands; and BMI was a significant predictor for lower back symptoms. Conclusion. The 12-month and 7-day prevalence of musculoskeletal symptoms among workers of the pulp and paper industry is higher in the lower back, shoulders, neck, knees and wrists/hands. [ABSTRACT FROM AUTHOR]

Cellulose was isolated from recycled pulp and paper sludge and used to synthesize cellulose nanocrystals. Response surface methodology and Box-Behnken design model were used to predict, improve, and optimize the cellulose isolation process. The optimal conditions were a reaction temperature of 87.5 °C, 180 min with 4% sodium hydroxide. SEM and TEM results revealed that the isolated cellulose had long rod-like structures of different dimensions than CNCs with short rod-like structures. The crystallinity index from XRD significantly increased from 41.33%, 63.7%, and 75.6% for Kimberly mill pulp sludge (KMRPPS), chemically purified cellulose and cellulose nanocrystals, respectively. The TGA/DTG analysis showed that the isolated cellulosic materials possessed higher thermal stability. FTIR analysis suggested that the chemical structures of cellulose and CNCs were modified by chemical treatment. The cellulose surface was highly hydrophilic compared to the CNCs based on the high water holding capacity of 65.31 ± 0.98% and 83.14 ± 1.22%, respectively. The synthesized cellulosic materials portrayed excellent properties for high-end industrial applications like biomedical engineering, advanced materials, nanotechnology, sustainable packaging, personal care products, environmental remediation, additive manufacturing, etc. [ABSTRACT FROM AUTHOR]

During the early Cold War, it was difficult for American intelligence to penetrate the Iron Curtain but a potential solution soon arose: émigré intelligence groups such as the Magyar Harcosok Bajtársi Közössége (MHBK) or 'Association of Hungarian Veterans'. This group, however, turned out to be an intelligence 'paper mill'. Attempts at trans-Atlantic cooperation with the MHBK and similar groups failed as they lost most of their good sources and were penetrated by communist security services. By the mid-1950s, US intelligence cut these groups off, took over their good sources, and established a source registry to prevent recurrence of the problem. [ABSTRACT FROM AUTHOR]

Here, we propose a sensing scheme based on an all-dielectric metamaterial with the smooth reflection and transmission spectral lines in 10-60THz, and verify the applications of the measuring the resonance characteristics of Xuan paper samples. The reflection and thermal conductivity of Xuan paper samples enhance with the concentration of alum water increasing and weaken due to the thickness increasing. These results provide a solid foundation for this metamaterials in measuring the reflective and thermal resonance properties of Xuan paper samples. [ABSTRACT FROM AUTHOR]

Starch is one of the oldest adhesives, and has been utilised for a variety of applications, including as a consolidant for artworks and archives, after cooking. Although widely available, cost-effective, and versatile it has limitations such as large particle size, which makes it challenging for the adhesive to penetrate deeply into objects. Attempts to increase the concentration of starch adhesives for enhanced strength often lead to increased viscosity, hindering penetration and causing an undesirable film on the surface. Achieving a workable consistency often leads to reduced adhesive power. An approach to using nanosized starch as a binder for paper and cellulose-based objects is presented. Starch nanoparticles (SNPs) from wheat, rice, maize and waxy maize were successfully synthesised using a 'top-down' approach that is facile as well as energy efficient. Size distribution measurements indicate most particles to be less than 50 nm, smaller than the pore size of most historic papers. SNPs could make a better sizing adhesive than traditionally-made starch paste, and they are also a green alternative to a variety of chemically formulated, organic solvent-based adhesives. The compatibility, non-toxicity, and biodegradability of starch remained uncompromised during the modification. [ABSTRACT FROM AUTHOR]

The mechanical properties of fiber metal laminates (FML) are influenced by several various factors. Interface adhesion plays a particularly crucial role in interlaminar strength. Enhancing the interlaminar strength of carbon fiber reinforced aluminum laminate (CARALL) composites present a persistent challenge due to inherent weaknesses between metal and composite elements. Therefore, this study focuses on improving the interlaminar performance of CARALL composites by introducing cellulose paper interlayer at the metal/composite interface. The cellulose paper interlayer offers the advantage of being cost-effective and sustainable. Cellulose paper-interleaved CARALL composites were fabricated by vacuum bagging method and exhibited noteworthy improvements in mechanical properties. Comparative analysis with pristine samples revealed substantial enhancements, including a 15% increase in tensile strength, a remarkable 42% improvement in flexural strength, and a significant enhancement in mode-I fracture toughness by 65%. Furthermore, the cellulose paper interleaving played a crucial role in stabilizing fracture formation at the fiber-matrix interface, with mode II fracture toughness witnessing a 3% increase. Visual examination revealed the underlying toughening processes occurring in the interfacial area. This innovative approach of interleaving laminated composites with cellulose paper emerges as a sustainable and effective strategy, demonstrating the potential to fortify and toughen the interlaminar zones of CARALL composites. [ABSTRACT FROM AUTHOR]

The vision of the International Menopause Society (IMS) is that all women across the world will have easy and equitable access to evidence-based knowledge and health care, empowering them to make fully informed midlife health choices. The aim of this White Paper is to provide a well-balanced educational narrative of the menopause and menopause hormone therapy (MHT) from IMS experts, leading into World Menopause Day 2024. This is achieved by exploring the anthropology and history of menopause, the principles and controversies of prescribing MHT, and by placing this into regulatory and menopause society contexts. The White Paper also lays the groundwork for the forthcoming updated IMS recommendations on menopause and will act as a blueprint for the future ethical management of menopause from practical and aspirational perspectives. An important section of the paper is 'The 5Ws of prescribing MHT': WHO is MHT for; WHAT types and doses of MHT; WHEN should MHT be started and stopped; WHY is MHT important; WHERE can MHT be accessed? A key points summary of this information is provided for healthcare professionals and the public. The summary provides 'easy to access' advice regarding several recent controversial MHT prescribing issues in the healthcare and media spotlights. [ABSTRACT FROM AUTHOR]

AbstractThis paper introduces the special issue of the journal on trauma-informed care in forensic settings. We consider the contributions of each of the papers, followed by a discussion of the complexities of work in this area. We conclude by proposing three general principles that can be used to guide the ongoing development of trauma-informed forensic practice. [ABSTRACT FROM AUTHOR]

In a project to preserve photographic archives in Southeast Asia, the authors sought to develop sustainable solutions with low environmental impact, avoiding air conditioning and using locally available materials. Dry cabinets were tested and implemented to store a glass plate negative collection that was rehoused in envelopes and boxes made locally. The project took just over a year to complete, and two years of monitoring environmental conditions have shown that relative humidity can be stabilized at low levels. However, the dry cabinets are airtight to limit the introduction of moisture and dust, preventing air exchange. In order to avoid the build-up of degradation by-products released by the stored materials, and in particular off-gassing of acetic acid from the cellulose acetate-based photographs, the use of an adsorbent is necessary. To achieve this, a cellulose-based composite with particles of a porous hybrid inorganic/ organic solid, denoted as a metal–organic framework (MOF), at a very high loading over 70% by weight and shaped as a sheet of paper, has been prepared and tested. This special paper maintains acetic acid-free air in the cabinets and also helps to reduce the energy consumption by reducing the need for cool storage. This MOF paper composite traps small carboxylic acids and was found to be an appropriate solution for maintaining clean air in the dry cabinets or any other confined space or enclosure. Additionally, it can also be designed to trap other noxious pollutants such as hydrogen sulfide or formaldehyde, by choosing other MOFs. [ABSTRACT FROM AUTHOR]

As cousins, we discovered a treasure trove of family papers, revealing the intricate relationship between precarity and privilege of our family from Salonica navigating the post-Ottoman transition. Recognising the potential of family history to provide a more intimate and complex historiography, this article offers our initial study of these family papers. By highlighting the challenges posed by the scarcity of such documents in Middle Eastern studies, emphasising women’s roles in preserving family memory and focussing on the interplay between personal and political domains, we identify the preparation of a family tree as a gendered and socioeconomic project of preserving the past and shaping the present. By tracing our family's origins, including unsettling discoveries, we address matters of identity and memory before embarking on our analysis. By reconstructing the biographies of two generations, we characterise the family’s socioeconomic struggle to sustain their precarious privilege amid shifting frontiers and along their journey from Ottoman Salonica to Kemalist Turkey. Ultimately, this article underscores the significance of family history as a transnational, intergenerational, intersectional and social history that enriches our understanding of the post-Ottoman transition through the lives of ordinary (and some extraordinary) Ottomans. [ABSTRACT FROM AUTHOR]

The present paper is the second of three, constituting a whole project of translation and commentary composed of translated extracts from the "Catalogo n. 2 – Le madri di tutte noi," published by the Milan Women's Bookstore in 1982. The idea for the project was conceived by Silvia Niccolai and Angela Condello, who selected the extracts and provide the written commentaries on the original texts. The Yellow Catalogue, in which we find collective discussions, pages of personal diaries and, overall, the enterprise of a group of women debating over their literary symbolic mothers (who to read? And why?), is an interesting example of political use of literature. After forty decades from its publication, it still proposes inspiring and fresh suggestions for feminist political action and critique, while representing an interesting occasion for researching the philosophical roots of Feminism. The projects is composed like follows: Paper No1, In search of a feminine symbolic, by Angela Condello, already published on Law & Litterature and Paper No2, From Novels to the Figures, themes and strategies for a political practice. Paper No 2 is structured in two parts. Part One is the article here presented (Part One. "Interest in Reality." For every woman's autobiography) written by Silvia Niccolai; Part Two is the article Sexual difference: an occasion for being, coauthored by Angela Condello and Silvia Niccolai, which will be published in a forthcoming issue of this Journal. [ABSTRACT FROM AUTHOR]

The addition of calcium carbonate to cigarette paper can enhance its combustion performance and apparent properties. However, it does come at the cost of reduced paper strength. In this study, a flexible calcium carbonate (FCC) was developed through the in-situ formation of calcium carbonate on nanocellulose surfaces. The incorporation of FCC into cigarette paper offered the potential to improve filler retention and combustion performance while maintaining high paper strength. The results of the study demonstrated that when compared to the addition of 30% precipitated calcium carbonate (PCC), the filler retention rate in cigarette paper increased by 31.5% when 30% FCC was used. Scanning electron microscopy images showed that only a minimal number of inorganic particles were observed between the fibers in the FCC-containing paper, indicating appropriate air permeability and fiber-fiber bond strength. Furthermore, when compared to PCC-containing paper, the FCC-containing paper exhibited an 8.8% increase in tensile strength and a 7.5% increase in folding resistance. Additionally, thermogravimetric analysis of the cigarette paper revealed that the incorporation of flexible calcium carbonate effectively lowered the thermal decomposition temperature, leading to a 10.3% increase in the combustion rate of FCC-containing paper. The inclusion of FCC into paper fibers has the potential to enhance air permeability and regulate cigarette burning performance. Consequently, the FCC developed in this study holds promise as a substitute for traditional calcium carbonate fillers in cigarette paper applications. [ABSTRACT FROM AUTHOR]

Per- and polyfluoroalkyl substances (PFAS) analysis has become crucial due to their presence in the environment, their persistence and potential health risks. These compounds are commonly used in food contact materials (FCM) as a coating to provide water and grease-repellent properties. One of the pathways for PFAS to enter the human body is either through direct consumption of contaminated food or indirectly through migration from FCM into food. The purpose of this study was to investigate where the initial contamination of paper FCM occurs. We analysed paper material consisting of fresh fibre and secondary materials, intended to produce food packaging for the presence of PFAS. The samples were extracted and analysed for 23 different PFAS substances using the targeted approach with LC tandem mass spectrometry (LC-MS/MS). This analytical technique detects specific, easily ionisable PFAS with high sensitivity. However, one drawback of this approach is that it allows the identification of less than 1% of the PFAS known today. For this reason, we used combustion ion chromatography (CIC) to determine the content of extractable organic fluorine compounds (EOF) and compare it to the total fluorine content. The targeted analysis using LC-MS/MS measured an average sum concentration of PFAS of 0.17 ng g−1 sample. Our research shows that the primary PFAS contamination happens during the recycling process since all of the samples in which the targeted PFAS were measured belonged to the secondary material. The most frequently detected analytes were PFOA and PFOS, detected in 90% and 62% of the samples, respectively, followed by PFBS (in 29% of the samples). CIC showed that measured PFAS via LC-MS/MS amount to an average of 2.7 × 10−4% of total fluorine content, whereas the EOF was under the LOD in all of the measured samples. This result highlights the complexity of the accurate determination of PFAS compounds, displaying what kind of information the chosen methods provide. [ABSTRACT FROM AUTHOR]

Positive academic climates are critical to helping students thrive, and kindness innovations might enhance these climates. This conceptual paper's purpose is to share insights from a consensus building event focused on fostering relationships and knowledge-sharing among an international group of multidisciplinary students, faculty, and staff who explored ways to bring a kindness framework into post-secondary education. Participants underscored kindness as critical for students' experiences and university culture, and identified several levels of influence requiring intervention focus. Ideas and strategies emerging from the event might serve to encourage student-led kindness initiatives and prompt university personnel to integrate kindness into post-secondary institutions. [ABSTRACT FROM AUTHOR]

A core assumption in the current neurosemantic research is that meanings of concrete words (object nouns, action verbs) are at least partially grounded in modality-specific representations implemented by perceptual and motor cortices. Nevertheless, increasing evidence from the multisensory research suggests that extensive portions of what are traditionally considered modality-specific cortices are in fact supramodal in nature – that is, they can process specific information in multiple sensory modalities and in both normal and sensory-deprived individuals. My central argument in this paper is that the amount of data collected within the supramodal paradigm, although certainly not conclusive, is already robust enough to foster reflections about the role of modality-specificity in the semantic brain and to prompt considerations about the possibility of promoting a property-specific and modality-invariant turn in neurosemantics. [ABSTRACT FROM AUTHOR]

Following a suggestion in a footnote of the paper [1] by Fano, we give a direct proof of the fact that one of the two Fano threefolds of degree 72 in P 38 is isomorphic to the anticanonically embedded weighted projective space P (1 , 1 , 4 , 6) . [ABSTRACT FROM AUTHOR]

The pulp and paper industry stands out as an example of a technology based on a renewable resource, cellulose. The sludge, however, poses major environmental and public health problems. To effectively manage the sludge wastes, it is critical to fully evaluate its composition, possible environmental impacts, and the total amount of exploitable renewable resources. The study established the pH of the sludge to be 7.32 ± 0.98, an electrical conductivity (1.84 mS/cm), nitrogen concentration (2.65 ± 0.21%), and total organic matter (41.23 ± 3.11%). The cellulosic content was established to be 74.07 ± 2.71% which contributes to 53.07 ± 1.23% water holding capacity (WHC). The most abundant elements were C and O, followed by Cl, Si, Al, and Mg, with lower concentrations of S, Si, K, and iron. The polycyclic aromatic compounds (PAHs) levels ranged from 0.29 to 322.56 ng.g-1 with 1-methyl pyrene posting the highest concentration (322.56 ng.g-1. XRD peaks at 17.10°, 23.86°, 30.14°, and 36.57°, which imply the existence of CaCO3. SEM indicated that the sludge was majorly comprised of fibers materials with average particle sizes of 280 micrometers. TGA/DTG analysis showed that the sludge had the greatest cellulose and hemicellulose (64.7 wt. %). [ABSTRACT FROM AUTHOR]

La transición hacia el uso del papel para la enseñanza de la escritura en las escuelas elementales públicas en México no fue sencilla. Al finalizar el siglo XIX, se había cuestionado el uso de las pizarras por el riesgo que representaban para la salud, pues muchas veces los estudiantes borraban sus escritos con saliva y el material con el que estaban fabricadas no siempre guardaba las especificaciones necesarias, además el ruido al escribir era insoportable. En cambio, el papel, desde el punto de vista higiénico, pedagógico y estético, fue considerado un material superior frente a la dureza de la pizarra, el brillo de la superficie y la poca precisión que se obtenía en el trazo de las letras. Derivado de este planteamiento, se vislumbró seriamente la posibilidad de la adopción de papel en las escuelas oficiales. Sin embargo, este material era escaso y muy caro. Hacia el cambio de siglo, sólo dos fábricas de papel podían surtir a las escuelas y era necesario que abarataran el precio, que el sistema de distribución garantizara el abastecimiento y que el suministro fuera continuo. Este artículo analiza el inicio del proceso de reconversión de una tecnología para la enseñanza como era la pizarra por el papel. Analizo el gasto que significó y cómo esta modificación fue resultado de una multiplicidad de relaciones sociales, culturales, económicas y políticas que se entrecruzaron para dar una nueva configuración del tiempo, el ruido y los valores establecidos en el salón de clases. The transition to the use of paper in public elementary schools in Mexico was not easy. At the end of the nineteenth century, the use of slates had been questioned due to the health risk they represented since students often erased their writing with saliva and the material with which the slates were made did not always meet the necessary specifications. On the other hand, paper, from a hygienic, pedagogical and aesthetic point of view, was considered a superior material compared to the hardness of the slate, the shine of the surface and the lack of precision obtained in the tracing of the letters. Derived from this approach, the possibility of changing materials in official schools was seriously envisioned. However, the paper represented a very high cost. Only two paper mills could supply the schools and it was necessary to lower the price, and guarantee the supply by enhancing the distribution system. This article analyses the beginning of the conversion process of a technology for learning to write such as the slate for paper. I analyse the expense that it meant for the authorities and families, how the change was the result of a multiplicity of social, cultural, economic and political relations that intersected to give a new configuration of time, noise and established values in the classroom. [ABSTRACT FROM AUTHOR]

AbstractEdible polymers are safe for consumption by humans and use in society. Shellac is a derivative of Lac, which has been used for a long time in many different industries due to its remarkable properties, which include film-forming, water resistance, thermoplastic, adhering, bonding, and simple solubility in spirit and aqueous alkali solvents. A paradigm shift has been observed in the variety of applications and uses of shellac due to the growing desire for natural products, particularly in the food, pharmaceutical, 3D printing, stealth technology, green electronics, and intelligent sensor industries. It is commonly used as an enteric coating in the pharmaceutical sector and as a preservative coating or confectioners glaze in the food industry. Being a natural and eco-friendly substance, shellac has a great deal of potential for more sustainable technologies. Due to the film’s strength and polymerization, shellac, however, has limitations. The low stability and mechanical brittleness of shellac, which result from self-polymerization reactions, limit its application even though it has great potential as an environmentally benign protective covering. This review offers a comprehensive understanding of lac, encompassing its characteristics, its uses, and its prospects for the future. This study aims to investigate a new method that may mitigate some of the disadvantages of shellac coating whilst improving the material’s stability and mechanical properties. [ABSTRACT FROM AUTHOR]

This paper is a product of qualitative, ethnographic fieldwork which looked at interactions between Emirati people and camels. Both in traditional Bedu contexts and among contemporary breeders/riders/racers in the Arabian Gulf, camels have been useful to people as an economic resource or symbolic tool, but they have also been agents creating paths for human cultural activity. They are the lens through which people observe their society, yet they are also perceived as beings with lifeworlds of their own. In a humanizing effort they can represent what is inherently cultural, but they can also be seen as separate beings that inform people's worldviews. Recognizing animals' agency, observing the obliteration of subject–object boundaries in animal-centric cultures requires fundamental ontological revisions. This paper aims to propose a paradigm useful for multispecies ethnography studies, rooted in exploring entanglements between anthropological phenomenology and object-oriented ontology. Appreciating the central roles of experience, embodiment, and senses in human connections with animals make phenomenology a potent analytical framework for such studies. Ontologically speaking, the essence of interactions between camels and their Emirati aficionados can represent the nature of people's being-in-the-world, shaping their mental universe and cognitive processes. The main contributions of the research include using empirical evidence to address some of the recurring criticisms of object-oriented ontology and positioning these analyses within the GCC (Gulf Cooperation Council countries) context, which has rarely been done before. [ABSTRACT FROM AUTHOR]

Since the first years of history, microbial fermentation products such as bread, wine, yogurt and vinegar have always been noteworthy regarding their nutritional and health effects. Similarly, mushrooms have been a valuable food product in point of both nutrition and medicine due to their rich chemical components. Alternatively, filamentous fungi, which can be easier to produce, play an active role in the synthesis of some bioactive compounds, which are also important for health, as well as being rich in protein content. Therefore, this review presents some important bioactive compounds (bioactive peptides, chitin/chitosan, β-glucan, gamma-aminobutyric acid, L-carnitine, ergosterol and fructooligosaccharides) synthesized by fungal strains and their health benefits. In addition, potential probiotic- and prebiotic fungi were researched to determine their effects on gut microbiota. The current uses of fungal based bioactive compounds for cancer treatment were also discussed. The use of fungal strains in the food industry, especially to develop innovative food production, has been seen as promising microorganisms in obtaining healthy and nutritious food. Fungal-based bioactive compounds have various health benefits. Prebiotic fungi play an active role in the regulation of gut microbiota. Anti-tumor effective fungal components will contribute to alternative medicine. Beta-glucan and chitin are the most promising fungal metabolites for cancer treatment. [ABSTRACT FROM AUTHOR]

Thiophene sulfide is difficult to be removed by hydrodesulfurization. In this study, ZnCl2-waste paper fiber activated carbon was used as adsorbent to remove thiophene sulfide from simulated oil by hydrothermal modification. Under the optimum condition of ammonia modification, the adsorption capacity of modified adsorbent to BT is 14.8 mg S/g, 2.98 times that of unmodified. BET, FTIR and Boehm analysis showed that the mesopore volume of ammonia modified adsorbent increased by 96.62% and the mesopore ratio increased from 12.58% to 43.40%, which was conducive to improving the adsorption rate. After modification, the basic groups on the surface of the adsorbent increased by 44.3 times, and –NH3+, –OH and –NH2 enhanced the electron attraction and hydrogen bonding force between the adsorbent and BT molecule. Adsorption isotherms, adsorption kinetics and adsorption thermodynamics show that the adsorption process is spontaneous, entropic and exothermic. The pseudo-second-order kinetic rate constant increases with the increase of adsorption temperature, indicating that the increase of temperature is beneficial to accelerate the adsorption rate. The adsorption desulfurization process follows the mechanism of single and multilayer adsorption mixing. The results of this study can help to reveal more clearly that biobased activated carbon can be modified to adsorb thiophene sulfide. Ammonia modified adsorbents enhance the adsorption capacity for benzothiophene [ABSTRACT FROM AUTHOR]

Publishing scientific articles is an expedition of tenacious efforts with patience and conscientious decision-making; however, even with such careful consideration, researchers may overlook the dubious activities of clandestine organizations or remain oblivious to the unethical aspects of publishing. Paper mills are the latest impediment to academic publishing's integrity. The increasing number of paper mill publications damages the credibility of genuine journals and jeopardizes academic integrity, adding to the vulnerability of research. This paper deals with the tactics, activity, detection, impact, and solving the menace of such fraudulent practices. This paper is a summary of existing literature and analysis that aims to increase awareness of fraudulent practices like paper mills among researchers and academicians. [ABSTRACT FROM AUTHOR]

The history of subjects is often told analysing notions of knowledge in historical reforms, policies, curricula, and textbooks. In this article, we analyse student papers from 1968, focusing on their responses to the topic 'Social distinctions and prejudices in Denmark'. The students present a number of concepts and categories of social differences and prejudices, depict a contemporary problem, refer to theoretical or categorical frameworks, provide a historical account, state bold claims and/or present conceptual definitions. Then, by giving different examples from their everyday life and by establishing some form of line or structure in their writings, they form an argument or narrative. They do this by using—we assume—information from their textbooks, from what have been discussed in teaching, in the public debate, and in the students' homes. The student papers not only passively reflect but are part of the ongoing constitution of the subjects and subject matter, during a period of tremendous educational change. [ABSTRACT FROM AUTHOR]

Ink-paper historical documents, which are an important part of cultural heritage, can be damaged by various materials on the outside and the inside of the paper. Cotton fiber sheets treated with iron gall ink and then treated with stabilization materials were studied. Nanosized Mg(OH)2 was used as a deacidification material and potassium bromide, tetrabutylammonium bromide, or propyl gallate as antioxidant materials were investigated as a stabilization system for iron gall ink-damaged paper. All samples were artificially aged in the air for 150 h at 65 °C in a UV/moisture chamber or 500 h at 90 °C. The pH and alkaline reserve (AR) measurements, monitoring of color change, and scanning electron microscopy analysis data confirm that the aging effect is more destructive to the iron gall inked paper. The experiment results show that using alkaline materials with antioxidants, such as nano-Mg(OH)2 and propyl gallate, positively affects color changes of ink-damaged paper. Treatment with a stabilization system such as nanosized Mg(OH)2, a binder hydroxypropyl cellulose (Klucel), and an antioxidant as propyl gallate is a suitable method for iron gall ink damaged paper stabilization and preservation, according to the study results. [ABSTRACT FROM AUTHOR]

The present article provides a comprehensive analysis of the aging phenomenon of transformer insulation and the corresponding changes in insulation performance that occur over time. The present manuscript outlines diverse insulating materials that are employed in transformers, the fundamental aging mechanism of the insulation, the function of space charges in the aging of the insulation, and various simulation methodologies utilized for diagnosing the insulation status of the transformer. The primary focus of this paper is to examine the various numerical techniques employed in modeling and analyzing the aging characteristics of transformer insulation. The mechanisms underlying the accumulation of charge and distortion of electric fields in insulation are explained through the utilization of numerical modeling techniques. This paper focuses on understanding the mechanism of insulation aging, thereby facilitating the optimization and maintenance of insulation performance throughout its operational lifespan. [ABSTRACT FROM AUTHOR]

Cellulose filter paper (CFP) was modified with poly(acrylic acid) (PAA) and/or poly(ethylene glycol)methacrylate (PEGMA), followed by Cu immobilization for 4-nitrophenol (4NP) reduction. Among these samples, Cu-immobilized CFP modified with PEGMA polymer (CFP@PEGMA-Cu) exhibited the highest Cu incorporation of 2.21%. Those having the copolymer (CFP@PAA-co-PEGMA-Cu) demonstrated the highest efficiency, completing 4NP reduction in 3 min with an impressive 99.45% conversion, a high-rate constant (k) of 27.5 × 10−3 s−1, and turnover frequency (TOF) of 18.36 h−1. Notably, the catalysts containing PAA maintained good reusability, preserving 97% conversion upon 9 cycles. These results suggest their promising applications in sustainable catalysis, offering the catalytic potential with simple preparation and low cost required. [ABSTRACT FROM AUTHOR]

In her 'Manifesto to Decentre Theatre and Performance Studies' (2021), Swati Arora explores the intangible and invisible borders that function to exclude certain people and knowledges, usually indexed by race, gender, class, and geography, from the academy. As a new working group convenor, I'm interested in thinking through what hidden borders might operate through the Call for Paper and panel selection process. What are prospective panellists really being asked to demonstrate? What unofficial knowledges are privileged and who has access to these? How can we reorient this process towards questioning and away from demonstration of knowledge? In this short provocation I reflect my own experience of selecting abstracts and ask what work might be done to develop a more transparent and empowering model of panel curation. This is a short provocation that was prepared for the roundtable discussion on 'Decolonisation and Solidarity' as part of the conference, Borderlines IX: Seeking Solidarity and Wonder Through Performance, which took place at De Montfort University in Leicester, UK, on 30 June and 1 July 2022. [ABSTRACT FROM AUTHOR]

Scientific papers and patents are reliable sources of knowledge carriers for measuring science and technology advances, predicting technological trends, and formulating technology strategies. Although the idea of entirely using the two knowledge carriers is rapidly emerging in academic discussion, a theoretical framing of the comparisons is still not present in literature. This study conducts bibliometrics on 2986 patent families and 4755 scientific papers related to silicon carbide metal–oxide-semiconductor field-effect transistor (SiC-MOSFET) to identify its technological trends and compare the similarities and differences in knowledge generation and diffusion in science and technology. Our methodological framework consists of a combination of geographic distribution (identifying the research developments and distribution), cooperation networks (analyzing organisation collaboration and individual research cooperation), noun phrase co-occurrence clusters (discovering hot research topics), and the global main path analyses of citation networks (tracking the trajectory of knowledge flows). Ultimately, our results contribute to recent bibliometric paradigms beyond discovering the role of scientific papers and patents in promoting science and technology integration. [ABSTRACT FROM AUTHOR]

This discussion of two related papers on political activism by Bettina von Lieres and Afarin Kohan focuses on the mechanism of transformation from psychic experience into political action. In both papers, the move to political action is seen as a consequence of collectivization, politics being understood as a function of groups, but a distinction is made between brute politics and the elaboration of the political as a psychoanalytic process. The original papers are seen as furthering the aims of social psychoanalysis and community psychoanalysis. [ABSTRACT FROM AUTHOR]

This paper discusses the relevance of using physical situations to introduce the concept of angles at elementary school. We compare the effectiveness of two geometry teaching sequences. In the first one (physical sequence), the pupils learned the angle concept by experimenting on the playground (i.e. mesospace) and then modelling the situation. In the second one (paper-and-pencil sequence), the pupils worked solely in the space of a sheet of paper (i.e. microspace). In both sequences, pupils compared areas of space delineated by an angle between two directions. Pupils in two Grade 3 classes were exposed to one of the two teaching sequences. The unfolding of these sequences was videotaped and analyzed, and the pupils were tested individually, before and after teaching, to measure each sequence's effectiveness. Results showed that both sequences are effective to grasp the angle concept: Most pupils overcame the common erroneous conception of comparing angles' sides' lengths instead of angle openness. The comparison of areas of space delineated by an angle between two infinite directions, which is the two sequences' common core, seems to be the key factor underlying angle conceptualization. This paper ends with a discussion of these results' teaching implications and the merits of each sequence. [ABSTRACT FROM AUTHOR]

This article serves as an introduction to a collection of papers that respond to Jonathan Palmer's paper on the role of creativity in psychoanalytic work. The contributors, who are known for their creative approach to psychoanalysis and art, offer their unique perspectives on the theme of creativity in psychoanalysis. They emphasize the significance of creativity, aliveness, and play in the therapeutic process, drawing on personal experiences and artistic references. The papers encourage readers to reflect on their own sources of creative expression and consider the role of creativity in their own analytic encounters. [Extracted from the article]

In his paper "The Psychogenesis of a Case of Homosexuality in a Woman" (1920), Freud tried to outline a general psychoanalytic approach to homosexuality by recounting the case of an 18-year-old girl sent to him by her father. The case, as told by Freud, makes for awkward reading today. Loewald's theory of developmental narrative, differentiation, linking, and his notion of parricide as the individual giving voice to one's self, offers a different lens through which to view it. Although Loewald did not write directly about the issue of homosexuality, in boys or girls, in "The Waning of the Oedipus Complex" he gives voice to the inner processes of separation and linking from parents, leading to mourning, through which the adolescent has to go. In this paper, I offer a reading of the Freud case using Loewald's theory, which enables us to highlight homosexuality as a variation in the expression of human sexuality, rather than a pathological deviation as Freud implies, and presents the "unknown woman" as struggling with difficulties in mourning. [ABSTRACT FROM AUTHOR]

Municipal solid waste (MSW) characterization plays a pivotal role in devising effective waste management strategies conducive to fostering a circular economy. This study presents composition analysis across twenty-four subcategories sourced from residential, commercial, and industrial sectors in Kuwait. The study is conducted in accordance with the Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste (ASTM D5231). The results indicate that organic waste comprises 45.3%, followed by paper waste (19.9%) and plastics (19.8%). The remaining waste comprises glass waste (3.5%), diapers (2.7%), textiles (2.6%) and other waste. Paper waste (19.9%) consists mainly of mixed paper (12.1%), cardboard (3.7%), newspaper (3.3%), printer printouts (0.6%) and other office paper (0.2%). Plastic waste (19.8%) consists mainly of film (11.2%), PET (3.1%), HDPE (1.1%) and other mixed plastics (4.4%). Residential and mixed areas have the highest proportion of organic waste. Commercial areas produce the highest proportion of wastepaper (22.4%) and textiles (3.7%). Industrial areas produce the highest proportion of plastic waste (29.1%), most of which is film (17.3%). The study also provides an overview of the MSW management system in the country, an overview over the legislative framework, and forecasts of future waste generation rates with comparison to historical baselines. Implications: The precise and up-to-date characterization of municipal solid waste is imperative for scholarly journal submissions, as it establishes a foundational understanding of waste composition, aiding researchers and policymakers in the development of effective waste management strategies, resource recovery initiatives, and sustainable solutions to address the evolving challenges in waste management systems. This study provides detailed composition analysis for twenty-four municipal solid waste (MSW) subcategories collected across different sources: residential, commercial, industrial, and mixed areas. Time series forecasting is applied to predict MSW generation based on historical data obtained through the local municipality over the past decade. Factorial analysis is applied to investigate changes across source areas, and a hypothesis test is used to compare the current MSW composition against previous baselines. The results demonstrated significant variation across most waste categories. The plastic waste proportion has increased by 48.5% compared to 2013 data, despite awareness campaigns. Paper waste has also increased in proportion from 6.8% to 16.2%; this increase is associated with the mixed paper subcategory, which is mostly used for packaging. The composition data provided in this study are necessary for long-term monitoring, strategy assessment, and legislation associated with waste reduction and remediation. [ABSTRACT FROM AUTHOR]

Production planning and scheduling in the pulp and paper industry can be very challenging. In most cases, practitioners address the production planning process manually, which is time-consuming and sub-optimal. This study deals with production planning encountered in a pulp mill company involving different wood species, parallel heterogeneous lines, inventory limits, sequence-independent setup times and preventive maintenance. To tackle the problem, an efficient mixed-integer formulation is proposed that optimizes when, where and how much to produce of different wood species and schedules preventive maintenance to minimize the total setup times. Several computational experiments are conducted to solve a case study in a pulp mill company in Chile. The results show the capability of the model to support the decision-making process in the pulp and paper industry, providing an efficient tool for practitioners to solve the problem in a reasonable amount of time. [ABSTRACT FROM AUTHOR]

This article introduces a flexible and easy-to-implement open-ended scientific inquiry activity called the Paper Towels Challenge. After experimentally determining which of three unbranded paper towels is the most absorbent, students discuss their results and methods. The teacher facilitates the discussion of epistemological issues. This activity can be used regardless of the participants' age or country to promote science understanding, NGSS science and engineering practices, and twenty-first century skills, such as critical thinking and communication. The many uses, benefits, and possible adaptations of the activity are discussed. [ABSTRACT FROM AUTHOR]

In this essay, I argue that Raphael's double portrait of Agostino Beazzano and Andrea Navagero formed the painter's fullest response—made in purely pictorial terms—to Renaissance prosody as it was then being developed by his friends, especially the portraits' sitters and Pietro Bembo. The drafts of Raphael's own sonnets on drawings made while he was painting the Stanza della Segnatura are visualizations of the intellectual labor his poetic compositions entailed. A close looking at their placement across the paper on these "ekphrastic sheets" (to use Francesco Di Teodoro's term) as well as changes in the sonnets' texts offer tools for understanding the double portrait of Raphael's poet-friends. Raphael's often dismissed efforts at poetry made on these study drawings thus blossomed half a decade later in the contribution to Renaissance literary theory he made as a painter. [ABSTRACT FROM AUTHOR]

Schiff bases are produced through condensation reactions between aldehydes or ketones and molecules containing an amine group. Given their multifaceted uses across diverse domains, they have gained prominence. Numerous studies have been conducted in this field due to the uncomplicated methods of manufacturing and the abundant range of applications. Investigations into DNA binding are essential for understanding the many interactions between drugs and DNA. DNA binding can be investigated via UV-binding, fluorescence quenching, and viscosity investigations. This study aims to offer several research papers on the DNA binding activity of Schiff base metal complexes and compare them. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic had an exceptionally long and consequential rally effect in China. Drawing on an eight-wave nationwide survey, this article shows that the Wuhan lockdown boosted public confidence in the central government. The persistence of the pandemic and the initial success of the zero-COVID policy sustained the enhanced trust in the central government for over two years. However, the rally effect did not dissipate as quietly as usual. As trust in the central government returned to the pre-pandemic level following the Shanghai lockdown, defiant protests collectively known as the White Paper Movement broke out. Angry protesters demanded the termination of the zero-COVID policy and called for accountability from the ruling party and its top leader. This article argues that while the rally effect lasted exceptionally long in the authoritarian country, it could not be prolonged indefinitely. Ultimately, the dissonance between the declining trust in the central government and the persisting restrictive measures provoked the protests. [ABSTRACT FROM AUTHOR]

AbstractThis work engages with Karen Barad’s philosophy and theory of agential realism through research practices of critical autoethnography and arts-based methods. The work explores how knowledge, memory, language, and experience remain alive within practitioners and inform who we become and how we inherit the stories involved in being educators and therapists. This paper presents two entangled research processes involving engagement with material artefacts related to the author’s professional identity development and practice as an arts therapist in Aotearoa, New Zealand. Through Barad’s theory of diffraction, engagement with and reassembling research artefacts supports a consideration of what can happen when we map and remember stories from different times and spaces in our lives. Elucidating and exploring the contours of memories and experiences can be helpful practices to engage in as narrative is the most potent mechanism for memory and teaching, and as therapists and educators, we are living through and practicing from the tangle of these narratives. [ABSTRACT FROM AUTHOR]