Search

The impact of coated paper printability for image quality on the high-fidelity digital printing was studied in this paper. Compared with the traditional printing technology, high-fidelity digital printing technology is more likely to expand the color gamut, maintain the original tone linear and produce vivid image. The performance of coated paper to a large extent determines the image quality. In order to get high-quality printed matters, the mechanism of the coated paper printability influencing on the performance on high-fidelity digital printing is need to be researched in-depth. The printability of coated paper was studied from several aspects in this paper, including the structural properties, roughness, optical properties, absorption etc, the relationships between these properties and printing color, dot reproduction performance were also studied. Based on the previous theoretical and practical studies, the printability evaluation system of coated paper on high-fidelity digital printing was established initially. On digital printing, accurate color management technology also affects the printing quality as the performance of coated paper, so the advanced color management technology was also used in the current study. The results showed that the pore structure and the absorbent of coated paper were the most important factors for affecting the printing quality, and the roughness and optical properties of coated paper also had a certain impact.

The paper analyses the structural peculiarity and design methods of the adjustable heat pump, bring forward a new project which used adjustable heat pump system for paper machine dryers. The system can enhance the steam’s function, accelerate the speed and economize the energy.

Through the comparative study of several enrichment machines ,the performance of the high-speed washer is introduced. The high-speed washer has high dewatering and washing efficiency, he pulp can be concentrated from 0.8% ~ 1.5% consistency to 10% ~ 15%;And it has high ash removal rate and good pulp washing effect also. It can effectively remove the ink particles, fillers, and other small impurities, improve the pulp brightness. At the same time ,the waste paper deinking process treatment systems has been developed.

By using printability tester for printing on ordinary white cardboard and light beam hologram paper, measuring spectral information and chrominance information of the two samples, and then perform spectral fitting by analyses their color characteristics, The aim of this research was to propose one method for color calculation of printing on light beam hologram papers, according to the color information of ordinary white cardboard.

The experiment studied effects of paper on the height and glossiness of UV ink-jet 3D printing. The results showed that there all existed penetrations between the 1st ink layer and three kinds of paper, the bigger the roughness and bulk of paper were, the larger the penetration was, and penetration between the 1st ink and paper was obviously larger than that between two ink layers. Penetration between two ink layers was stable, almost not affected by paper. The bigger the roughness and bulk of paper were, the smaller the glossiness of ink layer was. There appeared directional ink strips on ink layer on three kinds of paper, beginning from the 3rd ink layer, there also appeared ink pits on ink layer on paper whose roughness and bulk were the biggest, which showed printer precision was also an important factor for the glossiness, apart from paper. Thus, the tight and smooth paper should be selected in UV ink-jet 3D printing. Before printing, pretreatment should be done to exclude the influence of the 1st ink layer and the ink strips.

This paper has a brief introduction to a algorithm that can automatically identify the defective cutting region when automatic paper cutter does quality analysis. The algorithm analyzed the characteristics of processed shear mark image,detected defects,found a critical point of defective part ,then a unique regional recognition algorithm was developed based on the basis of the general processing algorithm. The algorithms can pinpoint the region that cutting defects exist according to the coordinates of critical point accurately, improve the efficiency of quality analysis, and also has stated that image processing is available in the regional recognition of automatic paper cutter.

This paper describes simulation of combustion characteristics under high ambient and high injection of biodiesel combustion by using CFD simulation. Diesel engine performance and emissions is strongly couple with fuel atomization and spray processes, which in turn are strongly influenced by injector flow dynamics. The principal objective of this research is to seek the effect of temperature and pressure on the spray characteristics, as well as fuel-air mixing characteristics. Experiments were performed in a constant volume chamber at specified ambient gas temperature and pressure. This research was continued with injecting diesel fuel into the chamber using a Bosch common rail system. Direct photography technique with a digital camera was used to clarify the real images of spray pattern, liquid length and vapor penetration. The method of the simulation of real phenomenon of diesel combustion with optical access rapid compression machine is also reviewed and experimental results are presented. The liquid phase of the spray reaches a maximum penetration distance soon after the start of injection, while the vapor phase of the spray continues to penetrate downstream. The condition to which the fuel is affected was estimated by combining information on the block temperature, ambient temperature and photographs of the spray. The increases in ambient pressure inside the chamber resulting in gain of spray area and wider spray angle. Thus predominantly promotes for a better fuel-air mixing. All of the experiments will be conducted and run by using CFD. The simulation will show in the form of images.

In digital printing process, the color reproduction quality is no longer determined by printing sequence, trapping, solid density and etc., since the technique is different from traditional printing technology. In order to analyze the effects of paper on color reproduction quality in digital ink-jet printing, three kinds of commercial paper were selected and a set of experiments were carried out by using color management technique to simulate the digital proofing. The density and chromaticity of both primary color and composite color in each printed were measured. The effects of paper’s characters on shadow, mid-tone and highlight were analyzed and discussed. Finally the influence on color reproduction quality principle, including chromaticity and absorbing characteristics of paper, was revealed. The conclusion has certain significance in directive function in ink-jet printing.

To assess the oil-paper insulation of transformer, it is necessary to establish the equivalent circuit for it regardless of using the time domain methods or frequency domain methods. Based on the principle of dielectric polarization, the extended Debye model is always adopted for the equivalent circuit of oil-paper insulation in transformer in most cases; however, it is usually difficult to determine the number of relaxation mechanisms in the model. This paper presents a method to determine it by the time domain dielectric spectra, namely, conduct differential operation for the depolarizing current of transformer’s oil-paper insulation to obtain the time domain dielectric spectra, and the number of spectrum peaks is equal to that of relaxation mechanisms. Thereby, the extended Debye model of the equivalent circuit of the oil-paper insulation of transformer can be built. This paper describes the analytical procedures of the time domain dielectric spectra method in detail and presents examples to validate its feasibility and rationality in determining the equivalent circuit model of transformer’s oil-paper insulation.

Return voltage diagnostic method is an effective method of non-destructive diagnosis in transformer insulating state. The current study is that through experiments get polarization spectrum to analysis the transformer insulating state, but not yet carried out the influence of various factors to the experimental results. So, based on the Debye model and specific parameters comes from one equivalent model of the actual transformer, this paper using RVM methods to simulation analysis maximum return voltage and dominant time constant under different factors. Simulation results show that the diagnostic methods that combine maximum return voltage value with dominant time constant can preferably reflect the transformer insulation state.

Pattern of number of PD events ("NE" for short) variation detected by UHF online monitoring was found through experiments, demonstrating that in the first half life of oil-paper insulation the NE value declined at the beginning and then kept stable, while it increased sharply in the later half. Least square linear regression was applied to calculate the changing rate ("CR" for short) of the latest 168 measurements of NE, which turned out to be an appropriate indicator of life stage for its monotonicity over time from the initiation of PD till final breakdown. The Grubbs method was also applied to exclude erroneous data and to determine the credible variation of CRs.

This study describes a new precise recycle module as a clean poduction pocess and an environmental protection consideration that uses micro electroetching (MECE) and a new design of an intercross tool to remove defective transparent conducting oxide (TCO) nanostructures from the optical PET diaphragm surfaces for e-paper surface. This process takes very little time to remove the TCO easily and cleanly and is highly efficient both technically and economically. A large diameter of the cathode of the intercross tool combined with a small gap between the cathode and the workpiece corresponds to a higher removal rate of TCO. This higher feed rate combined with enough voltage results in a shorter machining time. A high rotational speed of the intercross tool can also improve dregs discharge and allows a higher feed rate of the optical PET. A small end radius of the cathode or a thin cathode of the bulge-form tool takes less time for the same amount (20 nm) of TCO removal.

The light inspection on surface finishing of most product measurement is an important feature in the industries. In this study, a lab module tester for examination on the different type quality of tissue paper quality was done. The light reflectance element was used in this study to differentiate the quality of tissue paper. The laser diode and photodiode was used as manipulator to differentiate the tissue paper and photo detector to detect the reflected light from the surface of tissue paper. The both of laser diode and photodiode were placed in a light box. Different level of intensity reflected from the surface material will have different voltage output. The result showed that the total ply high quality tissue paper has a higher reflected voltage output compared to low quality tissue paper.

To analyze the main causes of electric power equipments failure, this paper based on distance correlation definition, proposed a method about correlation identification between the multi-factor and equipments failure. Firstly, this paper sets the related factors influencing the equipments failure as numerical value, based on distance correlation definition, calculate the correlation between each factors and equipments failure, so as to determine the power of the main causes of equipments failure. At last, through 220 kV transformer fault case validates the effectiveness of the proposed method.

The effects of aluminum foil packaging materials on color reproduction were mainly studied from the following two aspects in this topic: (1) through the study of CIEl976 chroma space, color difference evaluations of 7 kinds of colors for aluminum foil were compared with that of coated paper, based on the established color libraries of coated paper. (2) Four different spectrophotometers of X-Rite were used to measure L*、 a*、 b* of different colors, analyzing the effects of different spectrophotometer on color reproduction. Research has proved that: (1) the method which color was transferred to the aluminum foil, according to the established color libraries of coated paper, is feasible, and there was no difference between two colors on aluminum foils by visual inspection, the chromatic aberration was less than 1. (2) From the measurements, aspheric photometers like X-Rite939, Spectroeye, X-Rite500 cannot be used for color measurement on aluminum foil, the error is bigger than SP64, and accuracy is lower. (3) Through the total color difference analysis of four instruments on magenta, the ball SP64 portable spectrophotometer is the most suitable equipment for color reproduction on aluminum foil packaging materials.

The size and the number of folds severely affect the performance of the diesel fuel filter. Computational fluid dynamics method was applied to diesel filter internal flow simulation, and flow pressure lost was test to verify the simulation result. CFD result shown that, when the filter paper angle less than 3°, the internal flow resistance of fuel filter grown rapidly. The flow resistance decreased slowly when filter paper angle of greater than 6°. If filter paper angle was less than 3 °, effective filter area of filter decreased sharply, and filtration efficiency was lower than limit. The filter paper dust capacity increased rapidly, when filter paper angle was greater than 4.5 °, which prolonged filter life. In order to ensure the flow resistance, filtration efficiency and service life, the angle of the filter paper should be between 3 ° to 4.5 °.

In Thailand Manufacturing, checking employee attendance is one of the important issues for human resource, because many manufacturing evaluate employees’ attendance and while giving the final bonus, HRs considers their total number of appearances on manufacture during the whole work time. This brings to the idea of having some tool to control employees’ attendance. Some manufacturing prefer to use paper sheet for controlling attendance, whereas some manufacturing prefer to use paper sheet for checking employees' attendance and after this, fill out these information into a system manually, like Thailand Manufacturing in Siracha Province does. However, this is not an efficient way since there will be spent much of time for checking employees names and putting marks like "presence" or "absence". Moreover, some employees may call his/her friend as "presence" even though this employee is currently absent. After thinking all these issues, researcher of the following research paper decided to create a system that makes easier to check employees’ attendance automatically, and this system is implemented in Thailand Manufacturing near SiRacha province. Actually, this is the first time when such kind of system is being used in manufacturing system of Thailand. The system is based on 1D barcode technology and run on mobile application with Android OS, and in this paper, details of this system are presented.

In recent years, there have been a number of interests on the Palm Oil (PO) and Coconut Oil (CO) as a potential alternative dielectric insulating fluid in transformers which stimulate different types of studies on these oils properties. Among the important studies is the lightning impulse properties. This paper presents the investigation on the lightning impulse breakdown voltage of PO and CO under non-uniform electric field. The PO used in this study is Refined, Bleached and Deodorized Palm Oil (RBDPO) Olein type. The influence of the testing methods, rising-voltage and up-and-down are investigated at 2 gap distances for both oils. It was found that the lightning breakdown voltage performance for some of the RBDPO and CO are comparable to MO.

This paper proposed a new method of describing street glare. Glare is a typical light environment, it is affected by streetlights and street surface conditions. It impact on street safety. This paper based on survey of Tianjin, Changsha, Zhengzhou street area, included optical lights types, height of light bulbs, distance between tow lights, street surface brightness, illumination and other factors examination and record. Survey date had been used to set 36 street lighting simulated models and compare with the calculation. The output for the analysis is a series of maps reflecting the relationship between street glare environment and its factors. The case study proved that street lighting environment is closely associated with streetlights bulbs brightness and its installation site. The results show that high level of light brightness will lead to high level of glare and higher light bulbs will increase glare.

Renewable energy is rapidly gaining importance as an energy resource to help aid the national energy depletion crisis of fossil fuel and coal. One of the most potential renewable energy sources in Malaysia is hydropower followed by solar energy. This paper presents the fabrication of Dye Sensitized Solar Cell (DSSC) using organic dyes from dragon fruit and chlorophyll which is extracted from spinach. The fabrication of DSSC uses the Dr.blade method. Result shows that the efficiency by using dragon fruit as sensitizer at 40µm TiO2 Thickness is 6.45%, better than the usage of chlorophyll dye which is 4.23% at the same thickness. Result also shows that at 80µm by using the dyes from chlorophyll extract has higher solar cell efficiency compare to dragon fruit. This shows that both the chlorophyll extract and dragon fruit shows potential in the development of a feasible working organic dye.

In order to clarify the operation and performance of ground source heat pump in severe cold regions, the paper based on the demonstration project about ground source heat pump at Yifu teaching building of Jilin Jianzhu University, expounds the profile of the demonstration project and the data monitoring program of the system about ground source heat pump, shows monitoring data of the running condition in winter in line with the demonstration project and analyses the monitoring data briefly. The result shows that the heating effect of ground source heat pump system is favorable and ground source heat pump system is obviously environmental and energy saving.

This paper based on multi-agent technology, according to automobile safety airbag roll bag station production technology, at first adopt TS fuzzy neural regression network to distributed modeling for the controlled object, the methods of combining supervision learning and reinforcement learning are used, according to multi-agent external reinforcement signals and the value function of evaluate network ,using adaptive genetic co-evolution algorithm to optimize the action network, so can adapt to the mutational environment, and engineering application supply the proof about the effectiveness of the control strategy.

In order to analyze inner electrical field distributions of EHV converter transformers windings end at valve side, a simulation circuit model of oil-paper combination insulations is established in this paper. Then ANSYS10.0 finite element method (FEM) is used to calculate the electrical field distributions under four different excited volatges, containing DC voltage, AC voltage, superimposed DC-AC voltage and polarity reversal (PR) voltage respectively. Simulation results show that when only under DC voltage, resistive electrical field distributions highly convergen on insulating cardboard whose resistivity is correspondingly big. While only under AC voltage, capactive electrical filed distributions highly centeralize on insulating oil whose dielectic capacity is correspondingly small. And under superimposed DC-AC voltage, its unformity lies in DC voltage or AC voltage function alone. While under transient polarity reversal volatge, its distrbutions present like tooth and electrical strength of insulating oil is bigger than that of insulating paper.

In order to improve the spine tape folding precision of GMS-7 type spine taping machine and reduce the labor intensity, this paper researched the principle of the spine tape folding process.Through analysis and calculation, the relation curve between folding angle and the advancing distance of paper tape is obtained, therefore, achieved is the free form feature of plow shaped guideways that provides the method to brush the paper tape on the spine of promissory note with glue smoothly.

Recycling of waste paper is demanded because of the shortage of forest resources, the pollution of environment and the scarcity of papermaking materials. It is important to raise the proportion of waste paper in the fiber materials in papermaking industry. Floating/washing method was used here with imported Old Newspaper (ONP) as elementary material. This article studied the deinking performances of many kinds of surfactants primarily. Among them several surfactants were picked out as deinking agent of Old Newspaper (ONP) because of their better deinking effect.

The implications of empathic models have been far-reaching and pervasive. Here, we verify the deployment of systems. In this position paper, we verify not only that context-free grammar and fiber-optic cables can agree to achieve this mission, but that the same is true for fiber-optic cables. This follows from the development of architecture.

At present, China's large span continuous rigid frame bridge (CRFB) has made rapid development, and has been applied in the railway bridges. This paper based on finite element analysis software ANSYS, using the simplified algorithm, establish a line - bridge - pier integration model for calculation of continuous welded rail (CWR) on bridge, the continuous rigid bridge and continuous rigid frame bridge (CGB) in two different conditions were compared and analyzed. The calculation results show that: the rail expansion force, bending force, braking force, rail broken gap of CRFB are smaller than that of the CGB of same beam span, in CWR, CRFB has obvious advantages, it should be popularized.; equivalent temperature span of CRFB are smaller than that of the CGB of same beam span, so the CRFB is less affected by the temperature; because of the pier and girder consolidation of CRFB, favorable to CWR, but due to the bending effect of bridge piers can lead to beam produces larger vertical deformation, thus affecting the track smoothness, which must be noticed in design.

t is a developing trend for the filter aids industry that producing filter aids using the diatomite concentrate of beneficiation owing to the limited resources of high quality diatomite. In the present paper the characteristics of diatomite concentrate from LinJiang were studied systematically. Additionally, blending processes of diatomite with flux, disintegration methods after calcination, effect of distribution of size and soaking time of filter aids on the permeability are explored. It is expected to be significative to the industries of filter aids preparation and filtration applications.

An implementation framework of stepped-frequency LFM (SF-LFM) radar echoes simulator is presented in the paper based on the decomposition and calculation of SF-LFM radar echoes of a moving target. The proposed method can be implemented conveniently with direct digital synthesis (DDS) logic resource. The feasibility of this resolution is verified with computer and semi-physical simulations experiments.

This paper based on the improved twin tripod sliding universal joint and let it has the determined movement output. And create the three-dimensional model of twin tripod sliding universal joint before and after improved in software pro/e, and then put it into the simulation module, carry out the kinematic simulation of the tripod center on coupling. Obtained the curves of displacement, velocity and acceleration for two kinds of tripod centers.

It is difficult to reach the request that 65% standard of building energy in china and the goal of China’s science and technology development in 2020 using traditional outer insulation technology. The several combinations of ordinary concrete (1) and bearing ceramsite concrete (2), styrofoam board of external thermal insulation for external wall (3) and cement-based glazed hollow bead insulation system (4) are made thermal calculations and cost analysis separately in this paper based on a practical project of Jiaozuo city. The results indicate that the combination of (2)+(4) is the best one, which reduces the energy saving rate, labor intensity, transportation weight, project cost by 74%, 20%, 30%-40% and 10% respectively.

The application of high voltage electric field for preservation of fruit juices has a promising scope in the food industry. The pulsed electric field (PEF) is an innovative non- thermal technique and free from bio-toxic effects. The technique has a viable solution of the problem yet faced in the food industry to prolong life and preserve and maintain quality with natural properties of the liquid food and beverages. In this study, we have treated the pineapples juice samples by different strengths of pulsed electric field such as 10, 20 and 30kV/cm for 5 minutes in each test. This study used new design of helix treatment chamber with three different lengths of 20, 30and 50cm. In these experiments, all samples were kept in same and normal condition with a temperature around 25-26 andthe humidity was between 55 and 65%. Then the observation based on chemical tests such as pH, conductivity, salinity and total dissolved solids (TDS) was recorded for all samples before and after the test. Based on results obtained by chemical parameters suggest that the injection on pulsed electric field of 30 kV/cm by the 50 cm treatment chamber has the best effect on pineapple juices characteristic as compared to the other value. The result of this experiment is encouraging and supportive of the better way for pasteurization the pineapple juices and increasing longevity of pineapple juices.

In order to reduce the loss in production and guarantee the quality of tobacco, the mixed tobacco vibration screening technology was studied. It introduced a double-layer vibration sieve into the tobacco production of cigarette enterprise, realized two technical indicators that the screening efficiency is high and the false screening rate is low. Mixed tobacco screen effect is obvious, the dust content in cigarette fell down, the false screening rate decreased 62%, and the loss reduced 41%. It provides a very good reference for the research and application of vibration screening technology.

This study investigates the physical properties of pure palm fatty acid distillate (PFAD) as a new, clean and renewable source of lubricant and hydraulic oil. This study is done using a four-ball tribotester. The experiments are conducted at five different temperatures of 55, 75, 95, 105 and 125 °C. The rotational speed was fixed at 1200 rpm, normal load was 40 kg and duration was 1 hour. For evaluating the results, all experiments again were conducted using commercial engine mineral and hydraulic mineral oil and at the end all results were compared together. The results show that PFAD has higher anti friction and anti-wear ability.

The paper is mainly focused on analysis characteristics of lobe pump with three different tooth profiles: Circular, Epi-cycloidal and Circular–Involute–Circular (CIC) rotor profiles. Based on the geometric analysis and mathematical model, the CIC rotor profile combined Circular–Involute–Circular is generated. In this paper, the CFD techniques are used to estimate the effects of tooth profile and lobe number to the pump performance. The simulation results obtained from FLUENT software illustrated that the rotor profile effects remarkably to the pump performance. The outlet pressure of CIC rotor profile is higher than that of the circular and epi-cycloidal rotor profiles. The numerical outcomes also showed that higher rotor’s speed is resulted in higher outlet pressure. Besides, the lobe number of rotor has effect slightly to the pump performance.

The performance of a Plate fin radiator in terms of heat transfer rate and coolant side pressure drop depends significantly on the distribution of coolant through its passages. Uneven flow through the passages i.e. flow maldistribution, can cause local hot spots in the radiator due to high coolant flow in some passages. The flow maldistribution among the passages can be reduced to a large extent by proper optimisation of the header. The present paper investigates the method to optimise the header of a 680 kW radiator to reduce the maldistribution in its passages using Computational Fluid Dynamics (CFD). The analysis was simplified by considering the porous media instead of simulating the exact fin configuration in the radiator. The maximum and absolute values of flow maldistribution factor were considered in this study to determine the effectiveness of the header with respect to flow maldistribution. The flow maldistribution factor was determined based on the individual velocity of coolant in a passage and the average velocity of coolant in all the passages. The methods used for optimisation were rounding the header inlet, tapering the header partially, changing the position of the taper and modifying the end portion of the header. In this paper two parameters, viz., flow maldistribution parameter and absolute maldistribution parameter were considered to measure the maldistribution of a radiator. Due to these optimisations in the header, the maximum and absolute values of maldistribution reduced up to 18% and 45% respectively.

Northeast Extreme Tee (NEXT) beams have been recently developed for the accelerated bridge construction. The skew effect on live load distribution in a NEXT beam bridge, especially with integral abutments, is not clear and shall be assessed. In this paper, various skew NEXT beam bridges are evaluated through validated finite element (FE) analyses with solid brick elements. Parameters as studied include beam section, span length, and skew angle. Per AASHTO LRFD specifications, one- and two-lane loaded cases are examined to obtain the maximum tensile strains in beam stems under the design live loading (HL-93). Unskewed bridges are used as control specimens to compute skew reduction factors (SRF) for moment from the obtained FE strains. The FE- and LRFD-SRFs for moment are compared in terms of figures, which indicate the LRFD-SRFs have good agreements with the FE-SRFs at large. For the majority of the bridges, LRFD-SFRs govern the FE-SRFs. The research findings from this paper are useful for practicing engineers to safely design a skew NEXT beam bridge with integral abutments.

This paper study applicability of non-destructive method of impact echo for diagnosis of high temperature degraded plain concrete. Impact echo method is often used for detection of defects, cracks, and non-homogeneity in constructions. It's based on impact-generated mechanical wave that propagate through the mass of testing specimen and is reflected and partially absorbed by voids and surface. In this paper, we present results of an experiment where test specimens of dimension 0.1 x 0.1 x 0.4 m were created with usage of coarse aggregate 11/22 mm. Specimens has been divided to 7 sets. First set of test specimens were kept at laboratory conditions as a reference. Next six sets were heated up to 1200 ° C. After this heating, the specimens were cooled spontaneously and then tested by impact echo method. We used a steel hammer as an exciter of mechanical wave, which has been transferred to signal by the piezoelectric sensor. Then we analyzed this signal and we focused on transverse waves. Results from non-destructive tests were compared with results from destructive tests.

This paper illustrates how the amplitude and phase of back focal plane distribution can be recovered in a confocal microscope system from several intensity images in the image plane. These will have a wide range of uses for imaging and sensing. We believe this method is complementary to the V(z) technique where the sample is defocused. The field generated in the back focal plane may be processed by virtual propagation which averages noise in a highly efficient manner. In this paper, we demonstrate that the phase information on the back focal plane can be recovered using ptychography with no need to modify the optical configuration and employ an interferometer. This phase information plays a crucial role in sensitivity of surface plasmons resonance biosensing systems.

In this paper, we firstly explain the concept of surface plasmon resonance imaging and a main key issue in the field of localized SPR imaging, which is the trade-off between resolution and sensitivity. We will then explain how V(z) scanning confocal microscope can overcome the trade-off and enable us to make a localized detection of multiple analytes in small quantities. This paper provides a brief review on a chronological development of the confocal surface plasmon embedded interferometric microscope and highlights the key idea behind each developments. Theoretical detection limit of the confocal system is within a single molecule detection regime, where 100kD molecule can be detected with 100μJ of light in the confocal system. We also discuss some key challenges in achieving the theoretical limit, such as, microphonic vibration and slow scanning speed of the system and how to get around these challenges. Lastly, we discuss some possible future developments to improve the system.

The paper presents the background and objectives of a new research project carried out in the field of in situ gas turbine combustion. An extensive literature review highlighting the state-of-the-art in the field is presented. Several possible solutions for the turbine burner are also included. The objectives and the expected original contributions of the projects conclude the paper.

This paper shows the results of a project that investigated the humidity of the air in the ventilation gap of a green façade system. The systems which were investigated are made of aluminium troughs, aluminium modules, or fleece. These systems are mounted on metal rails. The metal rails connect the façade with the plants. This creates a curtain façade that is ventilated by air. The humidity of the air in the gap was investigated, and this paper shows the results of the investigation.

The overall energy performance of buildings is determined not only based on structural and material solutions of the building. Boundary conditions affect the results of evaluation of the energy performance too. This paper deals with buildings in the Czech Republic. The paper is devoted to the evaluation of energy performance of buildings under changing boundary conditions. This means the change of the intensity of ventilation, changes in the structures’ accumulation and influence of thermal connections.

In order to break through the limitation of the width of river, depth of water, channel and etc., it is an optimal choice to construct a long-span suspension bridge. In a suspension bridge, the main cable is the major bearing member; and the use of super high strength cable wire can lighten the dead weight and obtain an economical design. 1960 Mpa cable wire is adopted by an under-construction suspension bridge, namely Ni-Zhou Channel Bridge, for the first time in China. In this paper, taking the Ni-Zhou Channel Bridge as a case-study, comparative analyses on dynamic characteristic and seismic response of long-span suspension bridge with 1960 Mpa cable wire are performed. Firstly, dynamic calculating model for Ni-Zhou Channel Bridge is built and its dynamic characteristics are studied; then by using response spectrum and time history analysis method, seismic response of Ni-Zhou Channel Bridge is investigated on the basis of design response spectrum and artificial seismic ground motions; finally, the energy dissipation performances of a seismic protection devices (viscous damper) are also discussed. The results show that long-span suspension bridge with 1960 Mpa cable wire has a longer natural vibration period; the use of viscous damper can effectively reduce the peak value of bending moment in stiffening girder. This paper can provide references for the project’s construction.

In this paper an attempt has been reported to bring out the development and testing features of a laboratory scale induction system suited to bottled (fixed composition) PG powered IC engine. A four stroke, single cylinder, spark ignited engine was tested with a bottled PG at a Compression Ratio (CR) of 11:1 and engine speed of 1500 rpm from no-load to full load engine operation. Using suitable throttling devices, a 130 bar supply gas cylinder pressure was conditioned along with other devices to operate engine at Naturally Aspirated (NA) mode. The engine was operated close to stoichiometry condition. The engine supported a peak load of 85 % amounting to a torque of 11.89 N-m and brake power of 1.86 kW against a 2.2 kW gasoline mode. A power loss of 15 % was observed and it was attributed to 25 % lower mixture heating value and 13.33 % lower product to reactant conversion ratio of PG. Overall engine operation was found to be satisfactory. This paper also addresses the need for customizing PG-air mixer and zero pressure regulator.

Primary water stress corrosion cracking (PWSCC) has been observed in CRDM nozzles, BMI nozzles and other penetration nozzles. The industry has used the repair method of replacement of nozzles fabricated of Alloy 690. After the replacement of the nozzle, the structural integrity analysis of new nozzle and welds should be performed to ensure the pressure boundary compliance with the original design requirement. In this paper, the pressurizer top head instrument nozzle of PWR nuclear power plant is evaluated as a typical pressure vessel penetration nozzle. The results showed that the repaired nozzle satisfies the ASME Code design requirement and the crack growth of the postulated flaw in 40 years of the nuclear plant life is acceptable.PWSCC degradation mechanism has been observed in CRDM nozzles, BMI nozzles and other penetration nozzles [1]. In some nuclear power plants built in China earlier, such as DAYABAY nuclear power plant and QINSHAN nuclear power plant, PWSCC degradation mechanism has been found in CRDM nozzle welds which manufactured of Alloy 600 and welded of Alloy 82/182[2]. The repair of the degraded nozzles is the popular choice for the nuclear power plant owners. After the replacement of the nozzle, the structural integrity analysis of new nozzle and welds should be performed to ensure the pressure boundary compliance with the original design requirement. In this paper, the pressurizer top head nozzle of PWR nuclear power plant is evaluated as a typical pressure vessel penetration nozzle. Stress intensities were conservatively determined for pressure and applicable thermal transients and compared to the allowable values of the ASME Code, Section III. Thermal stress of the transients was obtained from 3D finite element model (FEM). Residual stress of J-groove weld was obtained from 2D FEM analysis and used for fracture mechanics analysis. All of the analysis showed that the repaired nozzle satisfies the ASME Code design requirement and the crack growth of the postulated flaw in 40 years of the nuclear plant life is acceptable.

Creep crack within weldments are very common in engineering practices, and the cracking location in these welding structures always appears at the HAZ location. The mismatch effect on the mixed mode creep crack is still not clear in these available literatures. The aim of this paper is to investigate the mismatch influence on the creep crack of mixed mode thoroughly. A mixed mode creep crack within HAZ is established in this paper. The leading factor that dominates the creep crack tip field under mixed loading mode is studied. The influences of mismatch effect on mode mixity, stress distribution and stress triaxiality are proposed. The difference of mixed mode creep crack and normal mode I or mode II creep crack are compared. The influence of mixity factor on the transient and steady state creep of crack tip are also analyzed.

Bearing fault signal presents obvious nonlinear and non-stationary characteristics, and local mean decomposition (LMD) method can adaptively process nonlinear and non-stationary signal. Quadratic phase coupling is one of the commonest nonlinear phenomena, and three-order cumulant diagonal slice spectrum is suitable for the extraction of the frequency components involved in quadratic phase coupling. In order to effectively detect the fault features of rolling bearing, a fault feature detection method of rolling bearing based on LMD and diagonal slice spectrum was proposed in the paper. Diagonal slice spectrum was applied in the extraction of the frequency components involved in quadratic phase coupling from the simulation signal, and it successfully extracted the quadratic phase coupling frequency components of the , and . The method was finally used in the detection of the bearing inner race fault features, and the results demonstrated that compared with diagonal slice spectrum of the PF component signals, the diagonal slice spectrum of the PF component envelope signals can identify fault characteristics much clearer and brighter. Meanwhile, the effective extraction of the inner race fault features verified the effectiveness and practicability of the method proposed in this paper.

This paper covers design diagrams and algorithms for determining the strain state of soil mass in case of its underworking. When tunnels are constructed in restrained urban conditions peculiar to megapolises, there is an acute problem related to the assessment of their influence on the existing above-and underground facilities. The strains of buildings and structures that occur as a result of underground construction work may have an impact on the operation reliability of these facilities. Russian regulatory documents in the area of underground urban construction strictly govern the basic parameters of the subsidence trough, such as maximum vertical subsidence, curvature, inclination, etc., for most of the existing underworked structures. Such facilities include both buildings and structures of various purposes above ground and different types of utilities (roads and railways, pipelines, cable lines, etc.). The method described in the paper offers the use of an integral quantity of "volume loss" when tunneling is performed by tunnel-boring machines. The "volume loss" term shall be understood to mean the distance between tunnel lining and soil mass, which initially occurs due to the difference between rotor diameter and lining outside diameter. There are also a number of other technology factors affecting the increase of this parameter, and their quantitative assessment is given in this paper. The method proposed in this paper makes it possible to promptly assess the impact of tunneling operations on the existing underworked structures with account of basic influencing factors.

Robotics has lots of use in the industrial world and has lots of development since the industrial revolution, due to its qualities of high precision and accuracy. This paper is designed to display the qualities in a form of a writing robot. The aim of this study is to construct the system based on data gathered and to develop the control system based on the model. There are four aspects studied for this project, namely image processing, character recognition, image properties extraction and inverse kinematics. This paper served as discussion in modelling the robotic arm used for writing robot and generating theta for end effector position. Training data are generated through meshgrid, which is the fed through anfis.