Search

Aims/hypothesis: Glucose-dependent insulinotropic polypeptide (GIP) is an incretin hormone secreted by enteroendocrine K cells in the proximal small intestine. This study aimed to explore the function of human K cells at the molecular and cellular levels., Methods: CRISPR-Cas9 homology-directed repair was used to insert transgenes encoding a yellow fluorescent protein (Venus) or an Epac-based cAMP sensor (Epac-S-H187) in the GIP locus in human duodenal-derived organoids. Fluorescently labelled K cells were purified by FACS for RNA-seq and peptidomic analysis. GIP reporter organoids were employed for GIP secretion assays, live-cell imaging of Ca 2+ using Fura-2 and cAMP using Epac-S-H187, and basic electrophysiological characterisation. The G protein-coupled receptor genes GPR142 and CASR were knocked out to evaluate roles in amino acid sensing., Results: RNA-seq of human duodenal K cells revealed enrichment of several G protein-coupled receptors involved in nutrient sensing, including FFAR1, GPBAR1, GPR119, CASR and GPR142. Glucose induced action potential firing and cytosolic Ca 2+ elevation and caused a 1.8-fold increase in GIP secretion, which was inhibited by the sodium glucose co-transporter 1/2 (SGLT1/2) blocker sotagliflozin. Activation of the long-chain fatty acid receptor free fatty acid receptor 1 (FFAR1) induced a 2.7-fold increase in GIP secretion, while tryptophan and phenylalanine stimulated secretion by 2.8- and 2.1-fold, respectively. While CASR knockout blunted intracellular Ca 2+ responses, a CASR/GPR142 double knockout was needed to reduce GIP secretory responses to aromatic amino acids., Conclusions/interpretation: The newly generated human organoid K cell model enables transcriptomic and functional characterisation of nutrient-sensing pathways involved in human GIP secretion. Both calcium-sensing receptor (CASR) and G protein-coupled receptor 142 (GPR142) contribute to protein-stimulated GIP secretion. This model will be further used to identify potential targets for modulation of native GIP secretion in diabetes and obesity., (© 2024. The Author(s).)

Adaptive performance will increasingly be confronted with new insights as society today changes constantly. This raises questions as to what factors will impact employee's adaptive performance and what is their inner psychological mechanism. The terms of positive psychology and adaptive performance are important concepts in the domain of organizational behavior and human resource development areas. The literature, however, lacks a systematic review of it. Our research seeks to explore the inherence of employee adaptive performance via the prism of positive psychology, including Psychological Capital and PERMA (Positive Emotions, Engagement, Relationships, Meaning and Accomplishment). We selected 27 papers out of 382, which were generated from Web of Science and Scopus databases associated the keywords of the two concepts, and used the 2020 PRISMA flow program for the paper screening. By analyzing the underpin theories, the causation, and the measurement, we discovered that there is a complex and nuanced relationship between positive psychology and adaptive performance, and most of the research to date suggests that positive psychology components improve employee adaptive performance. This study maps the current knowledge at the nexus of positive psychology and adaptive performance to identify existing gaps and potential for further investigation., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Tang, Abu Bakar and Omar.)

With the increasing use of pressure-sensitive adhesives (PSAs) in various industries, there is a need for greater sustainability, particularly in developing polymer materials from renewable resources, as well as the reuse and recycling of materials to reduce environmental impact, reduce waste, or extend their life. Here, we outlined the required properties of PSAs which are governed by the molecular parameters (molecular weights, dispersities, molecular weight between entanglement, molecular weight between cross-links and gel content) of polymer materials which subsequently define the physical properties (storage and loss moduli, glass transition temperature) that are required for good performance in peel, tack and shear tests. The sustainable approach discussed here is the development of degradable polymer materials featuring selectively degradable linkages in the backbone. This provides a viable alternative for the design of PSAs that could overcome the 'stickies' problem and make the recycling of glass and cardboard more efficient., (© 2024 The Authors. ChemPlusChem published by Wiley-VCH GmbH.)

This study aimed to investigate the effect of supplementation of chitosan nanoparticles (CSNPs) on the capacitation of bovine spermatozoa during the in vitro fertilization process. Hyperactivated motility (HAM) and acrosome reaction (AR) of sperm cells as well as in vitro fertilization and cleavage rates are the main parameters used to estimate the effect of CSNPs on bovine spermatozoa's fertilizing ability. In this study, three different concentrations of CSNPs (10, 20 and 100 μg/mL) were prepared and characterized. Motile spermatozoa were separated from frozen–thawed semen by a swim‐up technique and capacitated in Sperm‐TALP medium supplemented with heparin only without CSNPs treatment (positive control), heparin + 10 μg/mL CSNPs, heparin + 20 μg/mL CSNPs, heparin + 100 μg/mL CSNPs and the last one served as a negative control tube which supplemented with 10 μg/mL CSNPs without adding heparin. Sperm cells were incubated for 90 min at 39°C in a 5% CO2 incubator and evaluated every 30 min at intervals. Cumulus oophorus complex (COCs) were matured in a 5% CO2 incubator at 39°C and inseminated in vitro with frozen–thawed bull sperm of the above concentrations. The inseminated oocytes were incubated at 39°C in a 5% CO2 incubator for 24 h and then examined for evidence of fertilization. The results of this investigation showed that HAM and AR were best affected by CSNPs at a concentration of 20 μg/mL during an incubation time of 60 min. As time went on, the overall proportion of spermatozoa with progressive motility (PM) decreased across all groups, and a substantially lower value was found at the dose mentioned above. Additionally, the impact of sperm treated with CSNPs on fertilization rate was assessed. The outcomes demonstrated that in comparison to the other concentrations (10 and 100 μg/mL), the positive control and the negative control, the proportion of fertilized oocytes was significantly higher in the CSNPs concentration (20 μg/mL). In conclusion, it could be inferred from this investigation that CSNPs support sperm functions during IVF and can be used for biomedical interventions in bovine spermatozoa. Additionally, a high IVF rate was achieved by using sperm treated with CSNPs as CSNPs enhance sperm capacitation and acrosome reaction. [ABSTRACT FROM AUTHOR]

Objective: To evaluate copper and zinc concentrations in plasma and follicular fluid from cattle ovaries, and estimate the impact of rational concentrations of copper and zinc oxide nanoparticles (CuO-NPs & ZnO-NPs) supplemented during in vitro maturation (IVM) against DNA damage of cumulus cells, glutathione content in oocytes and on consequent embryo development. Methods: Oocytes were obtained from 2 to 8 mm follicles by aspiration method for IVM. Replicates of experiments were performed on different days, with a separate batch of cumulus oocytes complex for each day. Results: The DNA damage of oocytes and cumulus cells significantly decreased with supplemental CuO-NPs or ZnO-NPs concentrations of 0.7 and 1.0 μg/mL in the IVM medium compared to medium without CuO-NPs or ZnO-NPs (P < 0.01). Total glutathione concentrations in oocytes and cumulus cells significantly increased following supplementation with both 0.7 and 1.0 μg/mL CuO-NPs or ZnO-NPs in comparison with 0 and 0.4 μg/mL CuO-NPs or ZnO-NPs supplemented groups (P < 0.01). Supplementation of CuO-NPs or ZnO-NPs during IVM medium at any concentration had no significant effect on cleavge rate. Both CuO-NPs and ZnO-NPs significantly increased blastocyst rates when oocytes were matured with 0.7, 1.0 μg/mL CuO-NPs concentrations (P < 0.01). In contrast, addition of 1.5 μg/mL of CuO-NPs or ZnO-NPs to the maturation media resulted in detrimental effects on the developmental competence of bovine oocytes confirming toxicity induced by CuO-NPs and ZnO-NPs in high concentrations. Conclusions: CuO-NPs or ZnO-NPs-treated bovine oocytes during IVM show low level of DNA fragmentation and increased intracellular glutathione content of cumulus cells. In vitro embryo development is improved by supplementation of rational concentrations of CuO-NPs or ZnO-NPs to culture media. Toxicity induced by CuO-NPs and ZnO-NPs is confirmed in high concentrations.

Gut hormones orchestrate pivotal physiological processes in multiple metabolically active tissues, including the pancreas, liver, adipose tissue, gut and central nervous system, making them attractive therapeutic targets in the treatment of obesity and type 2 diabetes mellitus. Most gut hormones are derived from enteroendocrine cells, but bioactive peptides that are derived from other intestinal epithelial cell types have also been implicated in metabolic regulation and can be considered gut hormones. A deeper understanding of the complex inter-organ crosstalk mediated by the intestinal endocrine system is a prerequisite for designing more effective drugs that are based on or target gut hormones and their receptors, and extending their therapeutic potential beyond obesity and diabetes mellitus. In this Review, we present an overview of gut hormones that are involved in the regulation of metabolism and discuss their action in the gastrointestinal system and beyond., (© 2023. Springer Nature Limited.)

Network security is paramount in today's digital landscape, where cyberthreats continue to evolve and pose significant risks. We propose a DPDK-based scanner based on a study on advanced port scanning techniques to improve network visibility and security. The traditional port scanning methods suffer from speed, accuracy, and efficiency limitations, hindering effective threat detection and mitigation. In this paper, we develop and implement advanced techniques such as protocol-specific probes and evasive scan techniques to enhance the visibility and security of networks. We also evaluate network scanning performance and scalability using programmable hardware, including smart NICs and DPDK-based frameworks, along with in-network processing, data parallelization, and hardware acceleration. Additionally, we leverage application-level protocol parsing to accelerate network discovery and mapping, analyzing protocol-specific information. In our experimental evaluation, our proposed DPDK-based scanner demonstrated a significant improvement in target scanning speed, achieving a 2× speedup compared to other scanners in a target scanning environment. Furthermore, our scanner achieved a high accuracy rate of 99.5% in identifying open ports. Notably, our solution also exhibited a lower CPU and memory utilization, with an approximately 40% reduction compared to alternative scanners. These results highlight the effectiveness and efficiency of our proposed scanning techniques in enhancing network visibility and security. The outcomes of this research contribute to the field by providing insights and innovations to improve network security, identify vulnerabilities, and optimize network performance.

Pressure-sensitive adhesives (PSAs) are made from soft, irreversibly lightly crosslinked polymers. Even after removal from surfaces, they retain insoluble networks which pose problems during the recycling of glass and cardboard. Herein, degradable PSAs are presented that provide the required performance in use but have networks that can be degraded after use. A series of copolymers was prepared through radical copolymerization of n-butyl acrylate, 4-acryloyloxy benzophenone (ABP) photo-crosslinker, and dibenzo[c,e]oxepin-5(7H)-thione (DOT) to provide degradable backbone thioesters. The optimum tack and peel strengths were found for molar contents of 0.05 mol% ABP and 0.25 mol% DOT. Degradation of the backbone thioesters through aminolysis or thiolysis led to the full dissolution of the networks, loss of adhesive properties of films (decreases in the measured tack and peel strengths), and the quick detachment of model labels from a substrate. Inclusion of DOT into PSAs offers a viable route toward degradable and recyclable packaging labels., (© 2023 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Importance: The mechanisms underlying the association between chronic stress and higher mortality among individuals with cancer remain incompletely understood., Objective: To test the hypotheses that among individuals with active head and neck cancer, that higher stress-associated neural activity (ie. metabolic amygdalar activity [AmygA]) at cancer staging associates with survival., Design: Retrospective cohort study., Setting: Academic Medical Center (Massachusetts General Hospital, Boston)., Participants: 240 patients with head and neck cancer (HNCA) who underwent 18F-FDG-PET/CT imaging as part of initial cancer staging., Measurements: 18F-FDG uptake in the amygdala was determined by placing circular regions of interest in the right and left amygdalae and measuring the mean tracer accumulation (i.e., standardized uptake value [SUV]) in each region of interest. Amygdalar uptake was corrected for background cerebral activity (mean temporal lobe SUV)., Results: Among individuals with HNCA (age 59±13 years; 30% female), 67 died over a median follow-up period of 3 years (IQR: 1.7-5.1). AmygA associated with heightened bone marrow activity, leukocytosis, and C-reactive protein (P<0.05 each). In adjusted and unadjusted analyses, AmygA associated with subsequent mortality (HR [95% CI]: 1.35, [1.07-1.70], P = 0.009); the association persisted in stratified subset analyses restricted to patients with advanced cancer stage (P<0.001). Individuals within the highest tertile of AmygA experienced a 2-fold higher mortality rate compared to others (P = 0.01). The median progression-free survival was 25 months in patients with higher AmygA (upper tertile) as compared with 36.5 months in other individuals (HR for progression or death [95%CI], 1.83 [1.24-2.68], P = 0.001)., Conclusions and Relevance: AmygA, quantified on routine 18F-FDG-PET/CT images obtained at cancer staging, independently and robustly predicts mortality and cancer progression among patients with HNCA. Future studies should test whether strategies that attenuate AmygA (or its downstream biological consequences) may improve cancer survival., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2023 Hassan et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Islamic world can never deny the special services of Hazrat Abu Baker Sidique (R.A). He left great impact on history of Islam especially in foreign policies. His life is a beacon for us. When he became a caliph, after the death of Hazrat Mohammad (S.A.W), The Muslim Ummah was facing very critical situation. He handled their entire situation wisely and patiently. He adopted same clear polices and give punishment to Muasailma Kazab. Muslim world can never pay tribute to Hazrat Abu Baker (R.A) for his great contribution to Islam. [ABSTRACT FROM AUTHOR]

Light Detection and Ranging (LiDAR) technology has become a significant factor in producing up-to-date and accurate topographic data in the current world. LiDAR technology has been used for years for many applications, including the efficient creation of digital model for large scale, high accuracy mapping. This technology offers fast, accurate, expedient and cost-effective ways of capturing wide area elevation information to produce highly detailed digital model of the earth. LiDAR is based on airborne laser scanners enables to acquire dense and accurate 3D data of the surveyed area, i.e., the Digital Surface Model (DSM). This paper presents an exploratory study to assess the accuracy of constructed DTM (Digital Terrain Model) and evaluating ground height without surface features using LiDAR Digital Surface Model (DSM). The study area comprised of an undulated area situated at Jinjang in the Klang Valley region, Malaysia covering an area of one kilometre square. LiDAR DSM and DTM constructed and derived from LiDAR were critically assessed with reference to the USGS Map Accuracy Standards. The accuracy of derived DSM and DTM were evaluated using ground control points derived from conventional surveying technique. The constructed models were accessed quantitatively and qualitatively. [ABSTRACT FROM AUTHOR]

An increase in number of Coronavirus disease 2019 (COVID-19) cases will lead to more cluster discovery in Malaysia. Furthermore, with the increasing population, city growth, workplace income needs, high-risk groups, and other relevant factors can contribute to the formation of the new clusters. The cluster distribution of the disease could be seen by mapping and spatial analysis to understand their spatial phenomena of the disease dynamics. The purpose of the study is to analyse the spatial distribution of COVID-19 cluster cases in Selangor for year 2020. Two objectives of the study are i) to determine the hotspot location of the COVID- 19 cluster, and ii)to examine the spatial distribution of the factors affecting the COVID-19 cluster. The data processing was conducted using hotspot analysis and ordinary least squares (OLS) in ArcGIS Pro and Microsoft Excel to explore the local disease phenomena. TheCOVID-19 cases was most prevalent in the Petaling district, followed by Hulu Langat and Klang. The virus had the least impact in Sabak Bernam, Hulu Selangor, Kuala Selangor, Sepang, Kuala Langat, and Gombak. Three environmental factors of population density, the effects of urbanisation, and workplace cases were influential variables at the local clusters. These findings could help the local agencies to facilitate and control the spread mode of the virus in a spatial human environment. [ABSTRACT FROM AUTHOR]

Poly(ethylene oxide) (PEO)-based polymer electrolytes are a promising class of materials for use in lithium-ion batteries due to their high ionic conductivity and flexibility. In this study, the effects of polymer architecture including linear, star, and hyperbranched and salt (lithiumbis(trifluoromethanesulfonyl)imide (LiTFSI)) concentration on the glass transition ( T g ), microstructure, phase diagram, free volume, and bulk viscosity, all of which play a significant role in determining the ionic conductivity of the electrolyte, have been systematically studied for PEO-based polymer electrolytes. The branching of PEO widens the liquid phase toward lower salt concentrations, suggesting decreased crystallization and improved ion coordination. At high salt loadings, ion clustering is common for all electrolytes, yet the cluster size and distribution appear to be strongly architecture-dependent. Also, the ionic conductivity is maximized at a salt concentration of [Li/EO ≈ 0.085] for all architectures, and the highly branched polymers displayed as much as three times higher ionic conductivity (with respect to the linear analogue) for the same total molar mass. The architecture-dependent ionic conductivity is attributed to the enhanced free volume measured by positron annihilation lifetime spectroscopy. Interestingly, despite the strong architecture dependence of ionic conductivity, the salt addition in the highly branched architectures results in accelerated yet similar monomeric friction coefficients for these polymers, offering significant potential toward decoupling of conductivity from segmental dynamics of polymer electrolytes, leading to outstanding battery performance., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Distributed Denial of Service (DDoS) attacks, advanced persistent threats, and malware actively compromise the availability and security of Internet services. Thus, this paper proposes an intelligent agent system for detecting DDoS attacks using automatic feature extraction and selection. We used dataset CICDDoS2019, a custom-generated dataset, in our experiment, and the system achieved a 99.7% improvement over state-of-the-art machine learning-based DDoS attack detection techniques. We also designed an agent-based mechanism that combines machine learning techniques and sequential feature selection in this system. The system learning phase selected the best features and reconstructed the DDoS detector agent when the system dynamically detected DDoS attack traffic. By utilizing the most recent CICDDoS2019 custom-generated dataset and automatic feature extraction and selection, our proposed method meets the current, most advanced detection accuracy while delivering faster processing than the current standard.

This single-center study aimed to explore the factors associated with coronavirus disease (COVID-19) transmission in a hospital. All laboratory-confirmed COVID-19 cases among health care workers (HCWs) in a tertiary hospital in Malaysia were analyzed cross-sectionally from January 25, 2020, to September 10, 2021. A total of 897 HCWs in the hospital had laboratory-confirmed COVID-19 infection during the study period. Around 37.4% of HCWs were suspected to acquire COVID-19 infection from the hospital workplace. Factors associated with lower odds of workplace COVID-19 transmission were being females, ≥30 years old, fully vaccinated, and working as clinical support staff. Involvement in COVID-19 patient care was significantly associated with higher odds (adjusted odds ratio = 3.53) of workplace COVID-19 transmission as compared with non-workplace transmission. Most HCWs in the tertiary hospital acquired COVID-19 infection from non-workplace settings. During a pandemic, it is important to communicate with HCWs about the risk of both workplace and non-workplace COVID-19 transmission and to implement measures to reduce both workplace and non-workplace COVID-19 transmission.

In tropical agroecosystems, limited N availability remains a major impediment to increasing yield. A [sup.15]N-recovery experiment was conducted in 13 diverse tropical agroecosystems. The objectives were to determine the total recovery of one single [sup.15]N application of inorganic or organic N during three to six growing seasons and to establish whether the losses of N are governed by universal principles. Between 7 and 58% (average of 21%) of crop N uptake during the first growing season was derived from fertilizer. On average, 79% of crop N was derived from the soil. When [sup.15]N-labeled residues were applied, in the first growing season 4% of crop N was derived from the residues. Average recoveries of [sup.15]N-labeled fertilizer and residue in crops after the first growing season were 33 and 7%, respectively. corresponding recoveries in the soil were 38 and 71%. An additional 6% of the fertilizer and 9.1% of the residue was recovered by crops during subsequent growing seasons. There were no significant differences in total [sup.15]N recovery, (average 54%) between N from fertilizer and N front residue. After five growing seasons, more residue N (40%) than fertilizer N (18%) was recovered in the soil, better sustaining the soil organic matter N content. Long-term total recoveries of [sup.15]N- labeled fertilizer or residue in the crop and soil were similar. Soil N remained the primary source of N for crops. As higher rainfall and temperature tend to cause higher [sup.15]N losses, management practices to improve N use efficiency and reduce losses in wet tropical regions will remain a challenge. Abbreviations: FUE, fertilizer use efficiency; NUE, nitrogen use efficiency; SOM, soil organic matter. doi:10.2136/sssaj2009.0192

The uses of pressure-sensitive adhesives (PSAs) are wide ranging, with applications including labels, tapes, and graphics. To achieve good adhesion, a PSA must exhibit a balance of viscous and elastic properties. Previous research has found that a thin, elastic surface layer on top of a softer, dissipative layer resulted in greater tack adhesion compared with the single layers. Superior properties were achieved through a bilayer obtained via successive depositions, which consume energy and time. To achieve a multilayered structure via a single deposition process, we have stratified mixtures of waterborne colloidal polymer particles with two different sizes: large poly(acrylate) adhesive particles (ca. 660 nm in diameter) and small poly(butyl acrylate) (pBA) particles (ca. 100 nm). We used two types of pBA within the particles: either viscoelastic pBA without an added cross-linker or elastic pBA with a fully cross-linked network. Stratified surface layers of deuterium-labeled pBA particles with thicknesses of at least 1 μm were found via elastic recoil detection and qualitatively verified via the analysis of surface topography. The extent of stratification increased with the evaporation rate; films that were dried slowest exhibited no stratification. This result is consistent with a model of diffusiophoresis. When the elastic, cross-linked pBA particles were stratified at the surface, the tack adhesion properties made a transition from brittle failure to tacky. For pBA without an added cross-linker, all adhesives showed fibrillation during debonding, but the extent of fibrillation increased when the films were stratified. These results demonstrate that the PSA structure can be controlled through the processing conditions to achieve enhanced properties. This research will aid the future development of layered or graded single-deposition PSAs with designed adhesive properties., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

The study aimed to determine the prevalence of continuity of illicit drug use and its associated factors among Malay opioid users receiving methadone treatment in Kelantan, Malaysia. This cross-sectional study involved a total of 150 respondents. Sociodemographic characteristic of participants, level of religiosity, and quality of life were collected using the self-administered questionnaires. The prevalence of continuity illicit drug use was 38.7% ( n  = 58) by self-report and 40.7% ( n  = 61) by positive urine test result for drugs. Positive hepatitis C status and high quality of life in the psychological health domain were associated with low continuity of illicit drug use by self-reported data and urine drug test results. In conclusion, the continuity of illicit drug use among methadone program users is still high, especially among those on methadone therapy for less than 2 years.

Solvent-free polymer-based electrolytes (SPEs) have gained significant attention to realize safer and flexible lithium-ion batteries. Among all polymers used for preparing SPEs electrolytes, poly(ethylene oxide), a biocompatible and biodegradable polymer, has been the most prevalent one mainly because of its high ionic conductivity in the molten state, the capability for the dissolution of a wide range of different lithium salts as well as its potential for the environmental health and safety. However, linear PEO is highly semicrystalline at room temperature and thus exhibits weak mechanical performance. Addition of nanoparticles enhances the mechanical strength and effectively decreases the crystallization of linear PEO, yet enhancement in mechanical performance often results in decreased ionic conductivity when compared to the neat linear PEO-based electrolytes; new strategies for decoupling ionic conductivity from mechanical reinforcement are urgently needed. Herein, we used lithium bis(trifluoromethane-sulfonyl)-imide (LiTFSI) salts dissolved in various nonlinear PEO architectures, including stars (4-arms and 8-arms) and hyperbranched matrices, and SiO 2 nanoparticles (approximately equal to 50 nm diameter) as fillers. Compared to the linear PEO chains, the room temperature crystallinity was eliminated in the branched PEO architectures. The electrolytes with good dispersion of the nanoparticles in the nonlinear PEOs significantly enhanced ionic conductivity, specifically by approximately equal to 40% for 8-arm star, approximately equal to 28% for 4-arms star, and approximately equal to %16 for hyperbranched matrices, with respect to the composite electrolyte with the linear matrix. Additionally, the rheological results of the SPEs with branched architectures show more than three orders of magnitude enhancement in the low-frequency moduli compared to the neat linear PEO/Li systems. The obtained results demonstrate that the solvent-free composite electrolytes made of branched PEO architectures can be quite promising especially for irregularly shaped and environmentally benign battery applications suitable for medical implants, wearable devices, and stretchable electronics, which require biodegradability and biocompatibility., (© TÜBİTAK.)

As a result of vehicle platooning, advantages including decreased traffic congestion and improved fuel economy are expected. Vehicles in a platoon move in a single line, closely spaced, and at a constant speed. Vehicle-to-vehicle communications and sensor data help keep the platoon formation in place, and the CACC system is responsible for maintaining it. In reality, V2V transmissions are essential for reducing platooning distances while still ensuring their safety and security. It is far more difficult to confirm the veracity of a V2V message's content than it is to verify its integrity and source authentication. Only platoon members can send and receive V2V communications by implementing a practical access control mechanism. The goal is to link a prospective platoon member's digital identification to their actual location inside the unit. A physical challenge-response interaction is used in the CAVVPM process to verify that a prospective platoon member respects the rules. The applicant is asked to perform a series of random longitudinal movements, thus, the protocol's name. Remote attackers cannot join the platoon or send bogus CACC communications because CAVVPM blocks them. CAVVPM is more resistant to pre-recording assaults than previous work, and it can validate that the candidate is precisely behind the verifier in the same lane compared to previous studies.

The distribution of surfactants in waterborne colloidal polymer films is of significant interest for scientific understanding and defining surface properties in applications including pressure-sensitive adhesives and coatings. Because of negative effects on appearance, wetting, and adhesion, it is desirable to prevent surfactant accumulation at film surfaces. The effect of particle deformation on surfactant migration during film formation was previously investigated by Gromer et al. through simulations, but experimental investigations are lacking. Here, we study deuterium-labeled sodium dodecyl sulfate surfactant in a poly(butyl acrylate) latex model system. The particle deformability was varied via cross-linking of the intraparticle polymer chains by differing extents. The cross-linker concentration varied from 0 to 35 mol % in the copolymer, leading to a transition from viscoelastic to elastic. Ion beam analysis was used to probe the dry films and provide information on the near-surface depth distribution of surfactant. Films of nondeformable particles, containing the highest concentration of cross-linker, show no surfactant accumulation at the top surface. Films from particles partially deformed by capillary action show a distinct surfactant surface layer (ca. 150 nm thick). Films of coalesced particles, containing little or no cross-linker, show a very small amount of surfactant on the surface (ca. 20 nm thick). The observed results are explained by considering the effect of cross-linking on rubber elasticity and applying the viscous particle deformation model by Gromer et al. to elastically deformed particles. We find that partially deformed particles allow surfactant transport to the surface during film formation, whereas there is far less transport when skin formation acts as a barrier. With elastic particles, the surfactant is carried in the water phase as it falls beneath the surface of packed particles. The ability to exert control over surfactant distribution in waterborne colloidal films will aid in the design of new high-performance adhesives and coatings.

Pressure-sensitive adhesives (PSAs) are usually made from viscoelastic, high-molecular-weight copolymers, which are fine-tuned by adjusting the comonomer ratios, molecular weights, and cross-link densities to optimize the adhesion properties for the desired end-use. To create a lightly cross-linked network, an ultraviolet (UV) photoinitiator can be incorporated. Here, we present the first use of perfluorophenylazide chemistry to control precisely a polyacrylate network for application as a PSA. Upon UV irradiation, the highly reactive nitrene from the azide moiety reacts with nearby molecules through a C-H insertion reaction, resulting in cross-linking via covalent bonding. This approach offers three benefits: (1) a means to optimize adhesive properties without the addition of an external photoinitiator; (2) the ability to switch off the tack adhesion on demand via a high cross-linking density; and (3) a platform for additional chemical modification. A series of poly( n -butyl acrylate- co -2,3,4,5,6-pentafluorobenzyl acrylate) or poly(PFBA- co -BA) copolymers were synthesized and modified post-polymerization into the photo-reactive poly( n -butyl acrylate- co -4-azido-2,3,5,6-tetrafluorobenzyl acrylate) [azide-modified poly(PFBA- co -BA)] with various molar contents. When cast into films, the azide-modified copolymers with a high azide content achieved a very high shear resistance after UV irradiation, whereas the tack and peel adhesion decreased strongly with the increase in azide content, indicating that excessive cross-linking occurred. These materials are thus photo-switchable. However, in the low range of azide content, an optimum probe tack adhesion energy was obtained in films with a 0.3 mol % azide content, where a long stress plateau (indicating good fibrillation) with a high plateau stress was observed. An optimum peel adhesion strength was achieved with 0.5 mol % azide. Thus, the adhesion was finely controlled by the degree of cross-linking of the PSA, as determined by the azide content of the copolymer chain. Finally, as a demonstration of the versatility and advantages of the material platform, we show an azide-aldehyde-amine multicomponent modification of the azide copolymer to make a dye-functionalized film that retains its adhesive properties. This first demonstration of using azide functionality has enormous potential for functional PSA design.

Background: Chronic hepatitis C virus (HCV) infection is one of the major causes of liver cirrhosis and liver carcinoma. Studies have indicated that an imbalance of cytokine activities could contribute to the pathogenesis of chronic HCV infection. This study aimed to investigate serum levels and gene expression of cytokines (IL-6, TNF-α and TGF-β1) in chronic HCV infection among Malay male subjects., Methods: Thirty-nine subjects were enrolled from various health clinics in Kelantan, Malaysia, and divided into two groups: patients with chronic HCV infection (HP) and healthy control (HS). The serum cytokines IL-6, TNF-a-were measured using Luminex assay, and serum TGF-β1 was measured by ELISA. The mRNA gene expression for IL-6, TNF-α and TGF-β1 was measured by real-time reverse transcriptase polymerase chain reaction (RT-PCR)., Results: There were statistically significant differences in the mean serum levels of IL-6, and TGF-β1 in HP compared to HS group ( p = 0.0180 and p = 0.0005, respectively). There was no significant difference in the mean serum level of TNF-α in HP compared to HS group. The gene expression for the studied cytokines showed no significant differences in HP compared to HS group., Conclusion: Serum IL-6 was significantly associated with chronic HCV infection., Competing Interests: The authors declare that they have no competing interests., (© 2022 Che Noh et al.)