Search

The 'gas‒liquid‒solid' mechanism annealing method was used to create a superhydrophobic boron nitride nanotube (BNNT) stainless steel mesh in a tube furnace at 1250 °C in an NH3 environment. Fe powder was used as a catalyst, and B:B2O3 = 4:1 was used as the raw material. The water droplets on the surface of the superhydrophobic material had a contact angle of approximately 150° and a slide angle of approximately 3°. By using molecular dynamics (MD) simulation technology, a three-dimensional braided physical model of nanodroplets and superhydrophobic BNNT mesh surfaces with the same contact angle and rolling angle was prepared via the function weaving method. The Weber number (We) was used as the entrance point to establish the relationship between macroscale experimental studies and nanoscale MD simulation analysis on the basis of these efforts. A study was conducted on the dynamic behaviour of droplets impacting a superhydrophobic BNNT filter surface. We suggest that the wettability, substrate structure, and impact velocity are connected to the impact dynamic behaviour of droplets on the basis of the data obtained at various scales. The findings demonstrate that when the droplet impact velocity increases, several droplet phenomena—such as impact–rebound, impact–spread–rebound, and impact–spread–breaking–polymerisation–spatter—appear on the substrate surface sequentially. The mechanism of impact behaviour at various scales is explained in light of these events. Furthermore, a better theoretical model is proposed to assess the droplet wetting transition at the nanoscale. This model accurately predicts the boundary Weber number that starts the wetting transition. Moreover, the connections among the impact velocity, spreading diameter, and contact time (or We) are examined. The tendencies found via MD simulations match the outcomes of the experiments. Our discoveries and outcomes broaden our understanding of how droplet impact affects the dynamic behaviour of superhydrophobic surfaces. A scientific foundation for examining the dynamic behaviour of droplets is provided by combining simulations and experiments. [ABSTRACT FROM AUTHOR]

Durable superhydrophobic fabrics with electromagnetic wave absorption were highly valuable in practical applications. In this work, durable superhydrophobic cotton fabrics with electromagnetic wave absorption were successfully prepared by modifying the cotton fabrics with polydopamine (PDA) and then depositing MoS2/RGO (MR) composites and polydimethylsiloxane (PDMS). The surface morphology, crystal structure, and thermal degradation properties of the obtained products were evaluated. The PDA modification enhanced the affinity and adsorption saturation between the fabrics and the MR composites. Here, the MR composites provided the fabrics with wave-absorbing components and rough micro/nanostructure, and the PDMS offered lower surface energy for the treated fabrics. Ultimately, the water contact angle (WCA) of the obtained cotton fabrics could reach 157.2 ± 0.4 ° and the minimum reflection loss (RLmin) was −45.3 dB at 11.1 GHz, which showed excellent superhydrophobicity and microwave absorption properties. In addition, the obtained cotton fabrics displayed excellent robustness against rubbing, bending, and laundrying and satisfactory chemical stability. This research showed promising prospects for the development of wearable materials with durable electromagnetic wave absorption. [ABSTRACT FROM AUTHOR]

Copyright of Baghdad Science Journal is the property of Republic of Iraq Ministry of Higher Education & Scientific Research (MOHESR) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Nosocomial infections affect implanted medical devices and greatly challenge their functional outcomes, becoming sometimes life threatening for the patients. Therefore, aggressive antibiotic therapies are administered, which often require the use of last‐resort drugs, if the infection is caused by multi‐drug‐resistant bacteria. Reducing the risk of bacterial contamination of medical devices in the hospitals has thus become an emerging issue. Promising routes to control these infections are based on materials provided with intrinsic bactericidal properties (i.e., chemical action) and on the design of surface coatings able to limit bacteria adhesion and fouling phenomena (i.e., physical action), thus preventing bacterial biofilm formation. Here, we report the development and validation of coatings made of layer‐by‐layer deposition of electrospun poly(vinylidene fluoride‐co‐trifluoro ethylene) P(VDF‐TrFE) fibers with controlled orientations, which ultimately gave rise to antifouling surfaces. The obtained 10‐layer surface morphology with 90° orientation fibers was able to efficiently prevent the adhesion of bacteria, by establishing a superhydrophobic‐like behavior compatible with the Cassie‐Baxter regimen. Moreover, the results highlighted that surface wettability and bacteria adhesion could be controlled using fibers with diameter comparable to bacteria size (i.e., achievable via electrospinning process), by tuning the intra‐fiber spacing, with relevant implications in the future design of biomedical surface coatings. [ABSTRACT FROM AUTHOR]

Extracting water from air offers a promising route to address the global challenge of water scarcity. However, bionic engineering surfaces for water harvesting often struggle with efficiently coordinating droplet nucleation and desorption. The recently emerging triboelectric effect at the liquid–solid interface offers a novel approach for developing bionic fog harvesting surfaces. In this study, inspired by Namib Desert beetles and lotus leaves, a biomimetic superhydrophobic surface with nanoscale hydrophilic domains is prepared via interfacial self‐assembly, exhibiting heterogeneous wettability for effective water harvesting. The essence of interfacial self‐assembly lies in the synergy of non‐covalent interaction forces, driving the self‐assembly of nanoparticles into surface micro‐nano hierarchical structures, thereby regulating wettability and increasing potential nucleation sites. Additionally, the triboelectric effect can directly utilize the triboelectric charges to facilitate droplet migration. The triboelectric effect can be generated by flexible mechanical input induced by walking, which enhances interfacial mass transfer, thereby rapidly improving droplet removal and achieving a 39.02% increase in water harvesting efficiency. This study has opened up a new breakthrough for the design of portable and efficient water harvesting systems. [ABSTRACT FROM AUTHOR]

The further applications of silicon carbide (SiC) are limited due to the ease of being contaminated and tendency for icing at low temperature caused by its intrinsically hydrophilicity. In recent years, superhydrophobic surface has been widely employed due to the potential value in anti-fouling and passive anti-icing. In this work, a novel laser ablation-silicone oil heat treatment (LASH) composite process is proposed to fabricate superhydrophobic SiC surface. Many microscale "fence" structures and nanoscale "broccoli" fragmental structures are successfully obtained, which can be adjusted by using different laser processing parameters. Besides, the X-ray photoelectron spectroscopy analysis demonstrates that the effective deposition of low surface energy chemical functional groups is the key to realize the superhydrophobic properties of SiC surface. The coupling effect between the micro/nano structures and low surface energy is confirmed to be important for the stability of Cassie-Baxter state at low temperature. In addition, the freezing process of water droplets on the LASH surface at low temperature and the mechanism of the rapid transition from Wenzel state to Cassie-Baxter state are analyzed. The experimental results indicate that the LASH surface possesses a longer static icing time and keeps good hydrophobicity at −5 °C. The icing temperature of the LASH surface decreases to −17.6 °C while the temperature of the untreated surface is −3.7 °C. Moreover, the LASH surface possesses a lower ice adhesion strength which means it is easier for the ice droplets to break away from the surface. After 20 cycles of icing-deicing experiments, the WCA of the LASH surface is still higher than 150° and its ice adhesion strength slightly increases to 240 kPa. Finally, the mechanical robustness of the LASH surface is studied through the abrasive belt and tape stripping tests, and the anti-fouling property is also evaluated. The change of ice adhesion strength on the LASH surface under cyclic icing experiment is analyzed. The experimental results show that the LASH surface has great mechanical durability and anti-fouling property, which is expected to further expand the application prospects of SiC in different fields. [Display omitted] • LASH composite process is developed to fabricate superhydrophobic silicon carbide surface. • Micro/nano structures and surface chemistry play important roles for superhydrophobicity. • Wettability of the surface can be controlled by adjusting the laser processing parameters. • LASH surface can achieve free transition from Wenzel state to Cassie-Baxter state. • LASH surface possesses excellent mechanical durability and anti-icing properties. [ABSTRACT FROM AUTHOR]

[Display omitted] Intelligent shape memory polymer can be potentially used in manufacturing implantable devices that enables a benign variation of implant dimensions with the external stimuli, thus effectively lowering insertion forces and evading associated risks. However, in surgical implantation, biomaterials-associated infection has imposed a huge burden to healthcare system that urgently requires an efficacious replacement of antibiotic usages. Preventing the initial attachment and harvesting a biocidal function upon native surfaces may be deemed as a preferable strategy to tackle the issues of bacterial infection. Herein, a functionalized polylactic acid (PLA) composite membrane assembled with graphene (GE, a widely used photothermal agent) was fabricated through a blending process and then polydimethylsiloxane utilized as binders to pack hydrophobic SiO 2 tightly onto polymer surface (denoted as PLA-GE/SiO 2). Such an active platform exhibited a moderate shape-memory performance upon near-infrared (NIR) light stimulation, which was feasible for programmed deformation and shape recovery. Particularly stirring was that PLA-GE/SiO 2 exerted a pronounced bacteria-killing effect under NIR illumination, 99.9 % of E. coli and 99.8 % of S. aureus were effectively eradicated in a lean period of 5 min. Furthermore, the obtained composite membrane manifested excellent antiadhesive properties, resulting in a bacteria-repelling efficacy of up to 99 % for both E. coli and S. aureus species. These findings demonstrated the potential value of PLA-GE/SiO 2 as a shape-restorable platform in "kill&repel" integration strategy, further expanding its applications for clinical anti-infective treatment. [ABSTRACT FROM AUTHOR]

Flexible strain sensors are of great significance in health monitoring, wearable electronic devices, intelligent robot sensing, and other fields. Most of the reported works focus on the enhancement of sensitivity or working range, while linearity is ignored and exhibits strong nonlinearity. Conflict among performances remains a serious challenge for the development of flexible strain sensors. Herein, inspired by the architecture of butterfly's wings, a strain sensor with double conductive layers and wrinkles/holes structures is proposed. The fabricated sensor shows a high linearity of >0.98 over a full working strain range of 120%, and a linearity of up to 0.999 within a strain range of 0%–30%. Apart from that, the sensor also presents a sensitivity of 8.28, high stability over 40 000 cycles when subjected to a full‐scale strain, as well as a water contact angle of >167.4°. Meanwhile, strains as low as 0.075% can be identified, while a maximum frequency of 40 Hz can be responded to for the sensor. It is demonstrated that the sensor is capable of enabling flexible grippers to sense and monitor the motions of underwater vehicles, indicating its greater potential for diverse applications, such as human–machine interaction, marine environmental protection, and biological research. [ABSTRACT FROM AUTHOR]

Mitigating the adverse effects of corrosion failure and low-temperature icing on aluminum (Al) alloy materials poses significant research challenges. The facile fabrication of bioinspired superhydrophobic materials offers a promising solution to the issues of corrosion and icing. In this study, we utilized laboratory-collected candle soot (CS), hydrophobic fumed SiO2, and epoxy resin (EP) to create a HF-SiO2@CS@EP superhydrophobic coating on Al alloy surfaces using a spray-coating technique. Various characterization techniques, including contact angle meter, high-speed camera, FE-SEM, EDS, FTIR, and XPS, were employed to investigate surface wettability, morphologies, and chemical compositions. Moreover, a 3.5 wt.% NaCl solution was used as a corrosive medium to evaluate the corrosion resistance of the uncoated and coated samples. The results show that the capacitive arc radius, charge transfer resistance, and low-frequency modulus of the coated Al alloy significantly increased, while the corrosion potential (Ecorr) shifted positively and the corrosion current (Icorr) decreased by two orders of magnitude, indicating improved corrosion resistance. Additionally, an investigation of ice formation on the coated Al alloy at −10 °C revealed that the freezing time was 4.75 times longer and the ice adhesion strength was one-fifth of the uncoated Al alloy substrate, demonstrating superior delayed icing and reduced ice adhesion strength performance. [ABSTRACT FROM AUTHOR]

As maritime transport becomes increasingly important, metal corrosion results in significant economic losses. Superhydrophobic materials have significant potential for corrosion prevention. However, poor compatibility between superhydrophobic materials and resin reduces the long‐term corrosion resistance. Interfacial strengthening cells (IS‐Cells) are designed to maintain superhydrophobicity and retain active hydroxyl groups participating in resin‐curing. IS‐Cells also contribute to achieving the maze effect. A novel anti‐corrosion IS coating is fabricated by compatible IS‐Cells and epoxy. IS coatings feature smooth surfaces and vertical compactness, protecting against liquid and gaseous corrosive medium. Strong diffusion resistance and extended diffusion distance ensure long‐term corrosion resistance of IS coatings. Approximately 85 µm of IS coatings remain corrosion‐free after 112 days of immersion in the NaCl solution. The low‐frequency impedance, self‐corrosion potential, and self‐corrosion current density are 1.68 × 109 Ω cm2, −0.0708 V, and 5.38 × 10−11 A cm−2, respectively. IS coatings can also withstand 2400 h of neutral salt spray testing without corrosion in the artificial scratches. Due to the electrostatic repulsion between the hydrophobic C–F chains onto IS‐Cells and protein molecules, IS coatings maintain anti‐fouling properties after dry‐wet immersion tests in the natural marine environment for 90 days. IS coatings show great potential for marine anti‐corrosion applications. [ABSTRACT FROM AUTHOR]

[Display omitted] Energy consumption from air cooling systems in summer, water scarcity in hot regions, and the functional reusability of waste paper are emerging environmental problems. Finding solutions to these problems simultaneously remains a significant challenge. Herein, a superhydrophobic passive cooling Cellulose-CaCO 3 film with hierarchical nano-sheets was fabricated to realize daytime radiative cooling with a temperature drop of 15–20 °C in summer and water harvesting with harvesting efficiency of 387 mg cm−2h−1 bd utilization of recycled waste paper. The superhydrophobic Cellulose-CaCO 3 film demonstrates its self-cleaning properties against inorganic and organic pollutants. Furthermore, the superhydrophobicity of the film was maintained after base/acid corrosions, dynamic water flushing, and thermal treatment at 100 °C for 7 h, exhibiting good durability of the superhydrophobicity. Moreover, the superhydrophobic Cellulose-CaCO 3 film is nonflammable after exposure to fire combustion for 1 min. In addition to waste paper, waste maize straws, and pasteboards were also collected to produce superhydrophobic passive cooling films. Results indicate that the above three cellulose-based raw materials can be well used to prepare durable superhydrophobic passive cooling materials. Environmental toxicology assessments confirm the safety of the material. This study not only provides a protocol for preparing superhydrophobic materials; but also demonstrates their potential for passive cooling and water harvesting. [ABSTRACT FROM AUTHOR]

The demand for superhydrophobic fabric with self‐cleaning and antibacterial features as potential practical applications has been rising steadily with the passage of time. In this research work, the wet chemical method is used to manufacture cotton with a superhydrophobic coating. Thus, Nanoparticles of silver were produced by using an in situ method. Afterward, the fabric is treated with a solution of perfluorooctyltriethoxysilane to make it superhydrophobic. The cotton fabric performs remarkably with exceptional hydrophobicity as it had a contact angle of 157 ± 1° and less than 10° in sliding angle. Water droplet's dynamic behavior is also studied so that the superhydrophobic fabric development can be proven. The fabric shows excellent chemical durability by performing chemical tests. The antimicrobial and self‐cleaning properties are greatly enhanced by the superhydrophobic coating on cotton. Particle density on the superhydrophobic cotton before and after self‐cleaning was found 5.1 and 0.4 mg/cm2. In addition, the treated cotton fabric also exhibited superior antibacterial properties against Escherichia coli bacteria. Therefore, the developed multifunctional cotton fabric can be used in real‐life applications. Highlights: Cotton fabric enables to repelling of dirt, oil, and water‐based stains more effectively.Silver nanoparticles possess potent antibacterial properties.Incorporation of PFOTS controls the release of silver into the environment.Versatile applications from healthcare and hospitality to outdoor and athletic apparel. [ABSTRACT FROM AUTHOR]

This research presents the development of a surface treatment for AZ91D magnesium alloy that exhibits both superhydrophobic and anticorrosive properties. Initially, a zinc-based phosphate film was deposited on the magnesium alloy surface. Subsequently, a composite coating with superhydrophobic properties was produced by surface modification using a fluorosilane-ethanol solution. The composite coating's microstructure, chemical composition, wettability, self-cleaning, and anti-corrosion properties were evaluated using scanning electron microscopy, a contact angle measurement instrument, and an electrochemical workstation. The results demonstrated that the main components of the composite coating were P, O, Zn, F, and C. The static contact angle reached 158°, providing superior self-cleaning and acid and alkali corrosion resistance. Additionally, the charge transfer resistance and coating resistance of the composite coating were significantly higher than those of the magnesium alloy substrate, effectively preventing corrosion and preserving the surface from fouling. [ABSTRACT FROM AUTHOR]

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Frequent oil spills pose a serious threat to the ecological environment and to human health. Therefore, it is a global topic to develop adsorbents with photothermal and superhydrophobic properties for the effective absorption of a high-viscosity crude oil. Herein, for the first time, the multiwall carbon nanotubes (MWCNTs)-superlight clay (SLC) was prepared using a freeze-drying method. Then, it was modified with octadecyl trichlorosilane (OTS) to obtain a superhydrophobic adsorbent (OTS/MWCNTs-SLC). The surface temperature of OTS/MWCNTs-SLC reaches 70 °C quickly under 1 kW m–2 solar irradiation, which is essential to lower the viscosity of crude oil. Consequently, the adsorbent material demonstrated a crude oil absorption capacity of 19 ± 0.4 g/g and a light/heavy oil absorption capacity of 10–26 g/g. Additionally, the superhydrophobic photothermal OTS/MWCNTs-SLC exhibited mechanical and chemical stability and enabled continuous crude oil recovery. The prepared OTC/MWCNT-SLC broadens the application of SLC and provides a strategy for crude oil cleanup. [ABSTRACT FROM AUTHOR]

Superhydrophobic materials used for oil–water separation have received wide attention. However, the simple and low‐cost strategy for making durable superhydrophobic materials remains a major challenge. Here, this work reports that stable and durable superhydrophobic cotton fabrics can be prepared using a simple two‐step impregnation process. Silica nanoparticles are surface modified by hydrolysis condensation of 3‐aminopropyltrimethoxysilane (APTMS). 1,4‐conjugate addition reaction between the acrylic group of cross‐linking agent pentaerythritol triacrylate (PETA) and the amino group of octadecylamine (ODA) forms a covalent cross‐linked rough network structure. The long hydrophobic chain of ODA makes the cotton fabric exhibit excellent superhydrophobic properties, and the water contact angle (WCA) of the fabric surface reaches 158°. The modified cotton fabric has good physical and chemical stability, self‐cleaning, and anti‐fouling. At the same time, the modified fabric shows excellent oil/water separation efficiency (98.16% after 20 cycles) and ultrahigh separation flux (15413.63 L m−2 h−1) due to its superhydrophobicity, superoleophilicity, and inherent porous structure. The method provides a broad prospect in the future diversification applications of oil/water separation and oil spill cleaning. [ABSTRACT FROM AUTHOR]

Superhydrophobic strain sensors are highly promising for human motion and health monitoring in wet environments. However, the introduction of superhydrophobicity inevitably alters the mechanical and conductive properties of these sensors, affecting sensing performance and limiting behavior monitoring. Here, we developed an alkylated MXene–carbon nanotube/microfiber composite material (AMNCM) that is simultaneously flexible, superhydrophobic, and senses properties. Comprising a commercially available fabric substrate that is coated with a functional network of alkylated MXene/multi-walled carbon nanotubes and epoxy–silicone oligomers, the AMNCM offers high mechanical and chemical robustness, maintaining high conductivity and strain sensing properties. Furthermore, the AMNCM strain sensor achieves a gauge factor of up to 51.68 within a strain range of 80–100%, and exhibits rapid response times (125 ms) and long-term stability under cyclic stretching, while also displaying superior direct/indirect anti-fouling capabilities. These properties position the AMNCM as a promising candidate for next-generation wearable devices designed for advanced environmental interactions and human activity monitoring. [ABSTRACT FROM AUTHOR]

Bubbles and foams are often removed via chemical defoamers and/or mechanical agitation. Designing surfaces that promote chemical‐free and energy‐passive bubble capture is desirable for numerous industrial processes, including mineral flotation, wastewater treatment, and electrolysis. When immersed, super‐liquid‐repellent surfaces form plastrons, which are textured solid topographies with interconnected gas domains. Plastrons exhibit the remarkable ability of capturing bubbles through coalescence. However, the two‐step mechanics of plastron‐induced bubble coalescence, namely, rupture (initiation and location) and subsequent absorption (propagation and drainage) are not well understood. Here, the influence of 1) topographical feature size and 2) gas fraction on bubble capture dynamics is investigated. Smaller feature sizes accelerate rupture while larger gas fractions markedly improve absorption. Rupture is initiated solely on solid domains and is more probable near the edges of solid features. Yet, rupture time becomes longer as solid fraction increases. This counterintuitive behavior represents unexpected complexities. Upon rupture, the bubble's moving liquid‐solid contact line influences its absorption rate and equilibrium state. These findings show the importance of rationally minimizing surface feature sizes and contact line interactions for rapid bubble rupture and absorption. This work provides key design principles for plastron‐induced bubble coalescence, inspiring future development of industrially‐relevant surfaces for underwater bubble capture. [ABSTRACT FROM AUTHOR]

The erosion phenomena of the natural stone in cultural heritage are induced by various sources. Consequently, the development of multifunctional protective materials that combine two or more useful properties is an effective strategy in addressing the synergistic effects of various erosion mechanisms. A multifunctional coating, consisting of a silane-based precursor and zinc oxide (ZnO) nanoparticles (NPs), is produced and tested for the protection of limestone. The hybrid coating combines the following three properties: superhydrophobicity, including water-repellency, photocatalytic self-cleaning and biocidal activity. The relative concentration of the NPs (0.8% w/w), used for the suggested composite coating, is carefully selected according to wetting studies, colourimetric measurements and durability (tape peeling) tests. The non-wetting state is evidenced on the surface of the composite coating by the large contact angle of water drops (≈153°) and the small contact angle hysteresis (≈5°), which gives rise to a physical self-cleaning scenario (lotus effect). The photocatalytic chemical self-cleaning is shown with the removal of methylene blue, induced by UV-A radiation. Moreover, it is shown that the suggested coating hinders the incubation of E. coli and S. aureus, as the inhibitions are 94.8 and 99.9%, respectively. Finally, preliminary studies reveal the chemical stability of the suggested coating. [ABSTRACT FROM AUTHOR]

Freshwater shortage is a growing problem. Inspired by the Sarracenia trichome fog-trapping and ultrafast water-transport structure, a series of hierarchical textured surfaces with high-low ribs with different wettabilities was prepared based on laser processing combined with dip modification. Through fog-collection performance tests, it was found that the samples with superhydrophobicity and low adhesion had the best fog-collection effect. In addition, it was observed that the fog-collection process of different microstructured samples was significantly different, and it was analysed that the fog-collection process was composed of two aspects: directional condensation and directional transport of droplets, which were affected by the low ribs number and rib height ratio. A design parameter was given to create the Sarracenia trichome-like structure to achieve a fast water transport mode. This study provides a good reference for the development and preparation of fog-collection surfaces. [ABSTRACT FROM AUTHOR]

This study synthesized a series of linear polyurethane elastomers (FTPU) with hydrophobicity and self-healing properties by adjusting the content of Polytetrahydrofuran (PTMEG) and fluorinated polyol (F-OH) as soft chain segments, isophorone diisocyanate (IPDI) and disulfide as hard chain segments. FT-IR, XPS, OM, 3D optical surface profilometer, contact angle tester, SEM, TG, and solvent resistance test were used to characterize its structure and study its self-healing, hydrophobicity, heat resistance, solvent resistance, etc. The results showed that with the increase of F-OH addition, the repair time was shortened and the repair effect was enhanced under the synergistic effect of disulfide bonds and fluorine hydrogen bonds. When the content of F-OH is 50 wt%, the self-healing efficiency is the highest, reaching 94.7%. FTPU can complete self-healing at room temperature (23 ± 2 °C) for 10 h, and self-healing can be completed within 6 min at 100 °C. Second, the introduction of F-OH significantly increased the F content on the surface of FTPU, and the water contact angle of FTPU gradually increased from 70° to 105.5°. More importantly, when FTPU was applied to fabrics, superhydrophobic fabrics with a contact angle of up to 154° were obtained. In addition, FTPU also exhibits excellent thermal stability and solvent resistance, with the T5% of FTPU-3 reaching 331 °C. FTPU has excellent comprehensive performance and can be widely used in various fields such as medical devices, electronic skin, flexible devices, etc. [ABSTRACT FROM AUTHOR]

The effect of extreme water repellency, called the lotus effect, is caused by the formation of a Cassie–Baxter state in which only a small portion of the wetting liquid droplet is in contact with the surface. The rest of the bottom of the droplet is in contact with air pockets. Instrumental methods are often used to determine the textural features that cause this effect—scanning electron and atomic force microscopies, profilometry, etc. However, this result provides only an accurate texture model, not the actual information about the part of the surface that is wetted by the liquid. Here, we show a practical method for estimating the surface fraction of texture that has contact with liquid in a Cassie–Baxter wetting state. The method is performed using a set of ethanol–water mixtures to determine the contact angle of the textured and chemically equivalent flat surfaces of AlSI 304 steel, 7500 aluminum, and siloxane elastomer. We showed that the system of Cassie–Baxter equations can be solved graphically by the wetting diagrams introduced in this paper, returning a value for the texture surface fraction in contact with a liquid. We anticipate that the demonstrated method will be useful for a direct evaluation of the ability of textures to repel liquids, particularly superhydrophobic and superoleophobic materials, slippery liquid-infused porous surfaces, etc. [ABSTRACT FROM AUTHOR]

Vibration sensors are widely applied in the detection of faults and analysis of operational states in engineering machinery and equipment. However, commercial vibration sensors with a feature of high hardness hinder their usage in some practical applications where the measured objects have irregular surfaces that are difficult to install. Moreover, as the operating environments of machinery become increasingly complex, there is a growing demand for sensors capable of working in wet and humid conditions. Here, we present a flexible, superhydrophobic vibration sensor with parallel microcracks. The sensor is fabricated using a femtosecond laser direct writing ablation strategy to create the parallel cracks on a PDMS film, followed by spray-coating with a conductive ink composed of MWCNTs, CB, and PDMS. The results demonstrate that the developed flexible sensor exhibits a high-frequency response of up to 2000 Hz, a high acceleration response of up to 100 m/s2, a water contact angle as high as 159.61°, and a linearity of 0.9812 between the voltage signal and acceleration. The results indicate that the sensor can be employed for underwater vibration, sound recognition, and vibration monitoring in fields such as shield cutters, holding significant potential for mechanical equipment vibration monitoring and speech-based human–machine interaction. [ABSTRACT FROM AUTHOR]

Carbon steel is widely used, but it is prone to corrosion, which can lead to safety accidents. In this study, a novel Ni‐SiC coating was synthesized on the surface of carbon steel using a one‐step electrodeposition method, and the influence of electrodeposition parameters on the wettability of the coating was investigated. This coating possesses abundant micro‐nanostructures on its surface, which, after being placed in a vacuum drying environment for 2 weeks, endows it with superhydrophobic characteristics. Due to its superhydrophobic properties and the rich micro‐nanostructures, the corrosion current density of this coating is 1/18.95 that of bare steel. After immersion in a corrosive medium for some time, the polarization resistance value of the coated sample was observed to be 13.05 times greater than that of bare steel, demonstrating its remarkable ability to enhance the corrosion resistance of the surface. The results of this study can provide a reference for the anticorrosion work on carbon steel. [ABSTRACT FROM AUTHOR]

The presence of oil-contaminated water due to oil spill disasters or improper industrial waste dumping is now a worldwide danger to both human health and the sustainability of the environment.The use of superhydrophobic materials has attracted considerable attention in the field of oil-water separation, owing to the increasing demand for effective and economical oil-water separation techniques.A new, easy, and inexpensive flame treatment method was used to make a nanocomposite (CuO-SiO2) in order to improve its hierarchical structure (micro-nano).The anodisation process produced copper oxide (CuO) nanostructures (NSs) on a copper mesh. Subsequently, the nanostructures were modified by dip coating with a solution of room-temperature vulcanised silicone rubber (RTV-SR).The coated mesh demonstrated remarkable characteristics of superhydrophobicity and superoleophilicity, with a water contact angle (WCA) of (160 ± 1°) and an oil contact angle (OCA) of (0°), as determined during the measurement of the surface's wetability. The coated mesh surface was characterised using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and energy dispersive spectroscopy (EDS).The successful separation of kerosene-water and diesel oil-water mixtures is accomplished by using a coated mesh in a simple filtration procedure. Furthermore, it has the capability to separate oils with a high efficiency of (99.8%) for kerosene and (87%) for diesel oil. It also has flux values of (7352.9 L.m-2.h-1) for kerosene and (6112.9 L/m2.h) for diesel. [ABSTRACT FROM AUTHOR]

Phosphogypsum (PG) is a solid waste generated by phosphate fertilizer industries that is currently used in concrete materials. However, adding PG to concrete usually results in reducing its water resistance and corrosion resistance. This paper presents a new method of applying PG to concrete to improve its water resistance. In this paper, a green superhydrophobic PG (SPG) coating was prepared using modified PG as a hydrophobic medium and cement as the bonding material. The contact angle between the superhydrophobic phosphogypsum coating (SPG coating) and water was 156°, and the coating reached a superhydrophobic state with good self-cleaning ability. Even when sandpaper was used to polish the coating, the water contact angle of the coating was still greater than 150°, indicating that the coating had good wear resistance. In addition, the results of water absorption and electrochemical experiments indicated that mortar coated with SPG had better water resistance and corrosion resistance than ordinary mortar. The SPG coatings with water resistance, wear resistance, and self-cleaning properties have potential applications in building exterior walls. [ABSTRACT FROM AUTHOR]

Purpose: To improve the corrosion resistance of magnesium alloys, the construction of protective coatings is necessary to extend the service life of Mg-based materials. Design/methodology/approach: SiO2 nanoparticles modified by dodecyltrimethoxysilane (DTMS) were added to the PP and a superhydrophobic Mg(OH)2/PP-60mSiO2 composite coating was fabricated on the surface of AZ31 magnesium alloy via the hydrothermal method and subsequently the immersion treatment. Findings: Hydrophilic SiO2 nanoparticles become hydrophobic after modified by DTMS, showing a higher dispersibility in xylene. By incorporating modified SiO2 nanoparticles into the composite PP coating, the hydrophobicity of the layer was enhanced, resulting in a contact angle of 166.3° and a sliding angle of 3.4°. It also improved the water repellency and durability of the coating. Furthermore, the intermediate layer of Mg(OH)2 significantly strengthened the bond between the PP layer and the substrate. The Mg(OH)2/PP-60mSiO2 composite coating significantly enhances the corrosion resistance of the magnesium alloy by effectively blocking the infiltration of the corrosion anions during corrosion. The corrosion current density of the Mg(OH)2/PP-60mSiO2 composite coating is approximately 8.23 × 10–9 A·cm-2, which can achieve a magnitude three times lower than its substrate, making it a promising surface modification for the Mg alloy. Originality/value: The composite coating effectively and durably enhances the corrosion resistance of magnesium alloys. [ABSTRACT FROM AUTHOR]

Construction measures and material failures at expansion joints of utility tunnels often lead to concrete cracking and water leakage issues. The use of superhydrophobic concrete can effectively prevent water leakage at these expansion joints. By dripping a mixture of silicone and turpentine onto pre-cured concrete and using a rapeseed oil soot deposition method,the surface is transformed to possess superhydrophobic properties. The prepared silicone-soot composite material inhibits the absorption of water and corrosive ions,provides thermal insulation to the original concrete,and can resist mechanical abrasion,heavy rainfall,and dynam ic impact from sulfuric acid droplets. Thereby enhancing the waterproofing capabilities of underground utility tunnels. [ABSTRACT FROM AUTHOR]

Copyright of Experimental Technology & Management is the property of Experimental Technology & Management Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Superhydrophobic surfaces have been used in various fields of engineering due to their resistance to corrosion and fouling and their ability to control fluid movement. Traditionally, superhydrophobic surfaces are fabricated via chemical methods of changing the surface energy or mechanical methods of controlling the surface topology. Many of the conventional mechanical methods use a top-to-bottom scheme to control the surface topolopy. Here, we develop a novel fabrication method of superhydrophobic substrates using a bottom-to-top scheme via polymer OSTE, which is a prototyping polymer material developed for the fabrication of microchips due to its superior photocuring ability, mechanical properties, and surface modification ability. We fabricate a superhydrophobic substrate by OSTE–OSTE micro mushroom forest via a two-step lithography process. At first, we fabricate an OSTE pillar forest as the mushroom stems; then, we fabricate the mushroom heads via backside lithography with diffused UV light. Such topology and surface properties of OSTE render these structures superhydrophobic, with water droplets reaching a contact angle of 152.9 ± 0.2°, a sliding angle of 4.1°, and a contact angle hysteresis of less than 0.5°. These characteristics indicate the promising potential of this substrate for superhydrophobic applications. [ABSTRACT FROM AUTHOR]

Copyright of Paint & Coatings Industry (0253-4312) is the property of Paint & Coatings Industry Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In this work, a series of fluorinated microemulsions were synthesized using thermally decomposable N-dodecyl-N,N-dimethylamine N-oxide (LDAO) as surfactant. Then, polybutylene terephthalate nonwoven fabrics (PBT) were coated with microemulsion and heat-treated. Superhydrophobic and oil-repellent modified PBT with WCA (water contact angle) of about 152°, a sliding angle of about 2.1°, and oil repellency grade of 8 were prepared. The effect of surfactants on the surface wettability of hydrophobic materials was analyzed by TG-DTA, XPS, and WCA tests. The results show that surfactants decrease the WCA of hydrophobic materials, but LDAO can eliminate this effect by heat treatment. The anti-corrosion and permeability of LDAO coatings were compared with those of conventional fluorinated coatings through degradation and anti-permeability tests. It was shown that the LDAO fluorinated superhydrophobic coating is more resistant to corrosion by chemical solutions and significantly improves the impermeability of porous materials. Anti-fouling and self-cleaning tests showed excellent anti-fouling and self-cleaning properties on several common substrate surfaces modified with LDAO fluorinated microemulsions. It is expected that these new LDAO fluorinated microemulsions have promising applications in the preparation of corrosion-resistant surfaces and impermeable structures. [ABSTRACT FROM AUTHOR]

Microwave absorption (MA) materials are essential for protecting against harmful electromagnetic radiation. In this study, highly efficient and ultrawide-band microwave-absorbing fabrics with superhydrophobic surface features were developed using a facile dip-coating method involving in situ graphene oxide (GO) reduction, deposition of TiO2 nanoparticles, and subsequent coating of a mixture of polydimethylsiloxane (PDMS) and octadecylamine (ODA) on polyester fabrics. Owing to the presence of hierarchically structured surfaces and low-surface-energy materials, the resultant reduced GO (rGO)/TiO2-ODA/PDMS-coated fabrics demonstrate superhydrophobicity with a water contact angle of 159° and sliding angle of 5°. Under the synergistic effects of conduction loss, interface polarization loss, and surface roughness topography, the optimized fabrics show excellent microwave absorbing performances with a minimum reflection loss (RLmin) of −47.4 dB and a maximum effective absorption bandwidth (EABmax) of 7.7 GHz at a small rGO loading of 6.9 wt%. In addition, the rGO/TiO2-ODA/PDMS coating was robust, and the coated fabrics could withstand repeated washing, soiling, long-term ultraviolet irradiation, and chemical attacks without losing their superhydrophobicity and MA properties. Moreover, the coating imparts self-healing properties to the fabrics. This study provides a promising and effective route for the development of robust and flexible materials with microwave-absorbing properties.

Abstract The demand for superhydrophobic fabric with self‐cleaning and antibacterial features as potential practical applications has been rising steadily with the passage of time. In this research work, the wet chemical method is used to manufacture cotton with a superhydrophobic coating. Thus, Nanoparticles of silver were produced by using an in situ method. Afterward, the fabric is treated with a solution of perfluorooctyltriethoxysilane to make it superhydrophobic. The cotton fabric performs remarkably with exceptional hydrophobicity as it had a contact angle of 157 ± 1° and less than 10° in sliding angle. Water droplet's dynamic behavior is also studied so that the superhydrophobic fabric development can be proven. The fabric shows excellent chemical durability by performing chemical tests. The antimicrobial and self‐cleaning properties are greatly enhanced by the superhydrophobic coating on cotton. Particle density on the superhydrophobic cotton before and after self‐cleaning was found 5.1 and 0.4 mg/cm2. In addition, the treated cotton fabric also exhibited superior antibacterial properties against Escherichia coli bacteria. Therefore, the developed multifunctional cotton fabric can be used in real‐life applications. Highlights Cotton fabric enables to repelling of dirt, oil, and water‐based stains more effectively. Silver nanoparticles possess potent antibacterial properties. Incorporation of PFOTS controls the release of silver into the environment. Versatile applications from healthcare and hospitality to outdoor and athletic apparel.

In this work, ZnO thin film is prepared by spraying a solution of zinc acetate precursor prepared with different solvents, namely, methanol, ethanol and distilled water at optimized conditions for aluminum substrate temperature and solution concentration. The impact of different solvents on the structural and hydrophobic properties of ZnO thin films was investigated by X-ray diffraction, Raman spectroscopy, Field Emission Scanning Electron Microscope and a Profilometer-Roughness Tester. The morphology of the elaborated ZnO thin films is spherical shaped nanostructured decorated by textures such as bumps (coexistence of ZnO micro-nanostructures). The results confirm that the different solvents used to prepare the ZnO thin films have a significant impact on the characteristics of these layers and the wettability study reveals that the surface of ZnO thin film prepared with distilled water is superhydrophobic.

In this work, PTDF composite hydrogel based on SiO 2 @PDA, F-HNT and PVA/PAM/TA/TiC hydrogel is investigated to achieve stable superhydrophobicity, self-cleaning and anti-fouling, excellent stretchability, sensitive conductivity, and applied to motion signal detection. [Display omitted] • A composite hydrogel was fabricated. • SiO 2 @PDA acting as an interlayer adhesive. • The surface is superhydrophobic. • The output signal can still be stabilized. With the advent of the information age, there is a growing demand for wearable sensing devices. Conventional hydrogels are a class of materials that can hold a large amount of water, with a three-dimensional network of hydrophilic polymerization chains inside. In remote areas or harsh environments, there is an urgent demand for a flexible sensor that is environmentally stable, wearable, and has high mechanical properties. Due to the hydrophilicity of the traditional hydrogel surface, it is easy to adsorb dust or be contaminated by liquid, which limits its further application. As a result, the superhydrophobic hydrogel F-PTD was designed using SiO 2 @PDA, F-HNT and PT hydrogel. TGA, XPS, SEM, EDS, FT-IR was used to characterize the structure of F-PTD, respectively. Based on the study of mussels, the adhesion property of polydopamine was utilized as an adhesion agent between organic–inorganic interfaces while improving the roughness of the hydrogel surface. The fabricated F-PTD superhydrophobic conductive hydrogels have excellent stretchability (Tensile Strain > 500 %), stable hydrophobicity (CA > 150°), and sensitive electrical conductivity (GF = 3.49). The contact angle of F-PTD is greater than 150° for tensile strains in the range of 0–350 %, and it maintains superhydrophobic under corrosive solutions with pH = 1–14. This enables F-PTD to perform the sensing function of detecting human body signals under complex environmental conditions, which has great potential for application in the field of underwater rescue, wearable electronics and human–computer interfaces. [ABSTRACT FROM AUTHOR]

[Display omitted] • Magnetic field assisted laser-induced plasma micromachining (MLIPMM) was proposed. • MLIPMM induced graphene with longitudinal growth on micro-nano structures. • The MLIPMM exhibited a high contact angle (163.1°) and a low roll-off angle (1.5°). • It has potential applications in lunar for self-cleaning and temperature resistance. High temperature resistant and self-cleaning superhydrophobic flexible film has potential application value in lunar exploration. In this paper, a novel method of magnetic field-assisted ultrafast laser induced plasma was proposed to fabricate strongly superhydrophobic graphene on polyimide film with multi-level micro-nano structure. The longitudinal magnetic field contributed to constrain the induced plasma in the lateral direction so as to form a plasma plume with high temperature and high energy density. The multi-level micro-nano graphene structures with better ordering and superhydrophobicity were fabricated, which had a contact angle of 163.1° and a roll-off angle of 1.5°, as well as hydrophobic C C bond content of 72.82 %. The droplets can achieve obvious bouncing at different heights of 1 cm and 5 cm on surfaces at different angles of 0°, 5° and 10°. The contact angle was still greater than 160° after 25 days of aging treatment and heating at 300 °C for 40 min. The water droplets before and after the heating of the sample can push the dust off the surface, showing excellent high temperature resistance and self-cleaning performance. [ABSTRACT FROM AUTHOR]

Superhydrophobic coating is the ideal anti-icing materials, and the superhydrophobic materials can delay the formation of ice crystals or reduce the strength of ice adhesion, but the existing coating has the problems such as poor mechanical property and fast natural aging of performance parameters. The modified graphene is partially embedded into the elastomer to produce a new coating. The icing-deicing performance of the coating is tested and compared, and the surface structure and chemical composition of the coating are analyzed. The results show that the new coating has a certain ability of electric deicing. In the re-mechanical properties test, the coating showed excellent properties in strain, wear resistance and aging resistance. The graphene introduced into the coating is the key to make the coating have a certain active deicing ability. The unique active and passive dual deicing properties of the coating are different from the traditional passive coating unique properties, which not only lays the foundation for the research and development of dual-attribute anti-icing coating but also opens up a new development direction of anti-icing coating.

Abstract A facile method for preparing superhydrophobic brass mesh is proposed based on electrochemical etching and surface modification. The impact of processing time and the electric potential of the electrochemical etching were studied on the contact angle (CA) of the mesh. The samples were examined using scanning electron microscopy, Energy-dispersive X-ray spectroscopy analysis, X-ray diffraction, and Fourier-transform infrared spectroscopy. The electrochemical etching process caused the decrement of wires’ thickness and imposed roughness. Results showed more dissolution of zinc than copper under 3 V of the electric potential and the processing times of 3 and 6 min. The optimum condition of electrochemical etching was obtained under the electric voltage of 3 V for a processing time of 6 min, which led to a CA of 155.5 ± 3.2°. The thickness of the mesh wires decreased by 17.7% due to electrochemical etching in this sample. This sample also showed low adhesion for a water drop. The efficiency of oil/water separation was above 95 for the xylene and ethyl acetate in a batch system. The effect of the flow rate of the oil–water mixture on separation efficiency was also examined. The optimum flow rate was 0.8 ml s−1 with a high separation efficiency of 96.8% for xylene/oil separation.

The urgent requirement of carbon reduction in the world provides wood products a historical opportunity to play a crucial role to fix carbon dioxide and reduce carbon emission. It is essential to reveal the in situ growth mechanism of copper nanoparticles on eucalyptus scrimber surface. Cu4(SO4)(OH)6 nanoflowers are in situ synthesized successfully on the surface of eucalyptus scrimber via a simple hydrothermal process in this work. The detailed nucleation and in situ growth process of Cu4(OH)6SO4 nanoparticles on the surface of eucalyptus scrimber, characterized by the trajectory of size evolution, are revealed first in this work. According to the classical nucleation theory, the nucleation stage of as prepared Cu4(SO4)(OH)6 nanoflowers includes nucleus formation and nucleus growth. Although the same initial precursor reactant is obtained at the nucleation stage, there are two types of early nanoparticles, with morphology of fusiform and strip shape being self assembled to nanoflower structure during the growth stage. Further, the modified eucalyptus scrimber exhibits excellent superhydrophobicity, UV durability, mold and moisture resistance, as well as reversible property. Therefore, the proposed in situ growth kinetics related to Cu4(OH)6SO4 nanoparticles on wood surface have potential to be a reference to develop multifunctional superhydrophobic wood‐based material for variable applications. [ABSTRACT FROM AUTHOR]

Drawing inspiration from nature has served as a crucial driving force behind human progress, enabling groundbreaking advancements and cross‐disciplinary integration through the emulation of biological superhydrophobic phenomena. Bioinspired superhydrophobic triboelectric materials stand out among advanced triboelectric materials due to their unique hydrophobic properties, exceptional moisture resistance, and remarkable electrical performance. However, the inherent complexity of natural phenomena and the need for refinement in bioinspired design pose significant challenges in the development of bioinspired superhydrophobic triboelectric materials. This comprehensive review delves into bioinspired superhydrophobic triboelectric materials from the perspectives of theoretical underpinnings, fabrication strategies, and cutting‐edge applications. Rooted in the interaction mechanisms between water molecules and triboelectric materials, the importance of enhanced hydrophobic properties is elucidated. A systematic overview of bioinspired superhydrophobic triboelectric materials’ construction strategies is presented, offering fresh perspectives and insights into the development and application of high‐performance triboelectric nanogenerators (TENGs). Finally, the current challenges and untapped opportunities in bioinspired superhydrophobic triboelectric materials are summarized to fully unlock their potential for applications in TENGs. [ABSTRACT FROM AUTHOR]

Anodized aluminum oxide (AAO) molds were used for the production of large-area and inexpensive superhydrophobic polymer films. A controlled anodization methodology was developed for the fabrication of hierarchical micro–nanoporous (HMN) AAO imprint molds (HMN-AAO), where phosphoric acid was used as both an electrolyte and a widening agent. Heat generated upon repetitive high-voltage (195 V) anodization steps is effectively dissipated by establishing a cooling channel. On the HMN-AAO, within the hemispherical micropores, arrays of hexagonal nanopores are formed. The diameter and depth of the micro- and nanopores are 18/8 and 0.3/1.25 µm, respectively. The gradual removal of micropatterns during etching in both the vertical and horizontal directions is crucial for fabricating HMN-AAO with a high aspect ratio. HMN-AAO rendered polycarbonate (PC) and polymethyl methacrylate (PMMA) films with respective water contact angles (WCAs) of 153° and 151°, respectively. The increase in the WCA is 80% for PC (85°) and 89% for PMMA (80°). On the PC and PMMA films, mechanically robust arrays of nanopillars are observed within the hemispherical micropillars. The micro–nanopillars on these polymer films are mechanically robust and durable. Regular nanoporous AAO molds resulted in only a hydrophobic polymer film (WCA = 113–118°). Collectively, the phosphoric acid-based controlled anodization strategy can be effectively utilized for the manufacturing of HMN-AAO molds and roll-to-roll production of durable superhydrophobic surfaces. [ABSTRACT FROM AUTHOR]

Transparent materials widely used in applications such as eyewear, solar cells, and optical devices, often suffer from environmental challenges including fogging, surface contamination, and mechanical deformation. However, a universal strategy that resolves all these issues in a single platform remains to be resolved. Herein, a monolithic micropillar structure based on polydimethylsiloxane (PDMS) elastomer is prepared followed by subsequent assembly of hydrogel micropatterns in between the micropillar array using inkjet printing to achieve flexible wet‐style superhydrophobic antifogging tapes that are applicable to various transparent materials and curvatures. The monolithic micropillar structure with low‐surface‐energy characteristics facilitates easy removal of surface contaminants by rinsing with water while granting mechanical durability. In addition, micropatterning of hydrogels via inkjet printing not only enables to maintain optical transparency in a fogging environment but also makes the fabrication procedure more scalable. Furthermore, the strong adhesion between the hydrogel and the elastomer is shown to provide enhanced stability under repeated stretching cycles and long‐term exposure to water while the presence of a loosely cross‐linked PDMS at the bottom of the tape made it applicable to a wide range of transparent substrates without using additional adhesives. [ABSTRACT FROM AUTHOR]

Transparent, photoluminescent, mechanically reliable, ultraviolet protective and superhydrophobic thermoplastic polyurethane (TPU) plastic was developed. A simple strategy to prepare transparent plastic that glows in the dark is to use alkaline earth strontium aluminate (AESA) nanoparticles trapped in thermoplastic polyurethane (TPUR). In order to improve both hardness and transparency of the plastic composite, cellulose nanowhiskers were used as a crosslinker and drier. The colorless plastic substrates exhibited a color shift to greenish when exposed to ultraviolet source. Transmission electron microscope (TEM) was employed to examine the morphology of AESA nanoparticles (8–15 nm in diameter) and cellulose nanowhiskers (3–7 nm in width and 645–665 nm in length). Morphological studies and hardness parameters were used to assess the TPUR samples. Excitation and emission spectral analyses were also employed to study the photoluminescence characteristics. The colorless plastic substrates that were made luminescent showed an excitation band at 388 nm and two emission bands at 452 nm and 515 nm. TPUR samples with greater AESA levels exhibited long‐persistent afterglow, whereas TPUR samples with lower AESA amounts exhibited rapid and reversible fluorescence when irradiated with ultraviolet light. Enhanced UV shielding and superhydrophobicity were observed in the photoluminescent plastic substrates upon increasing the phosphor content. [ABSTRACT FROM AUTHOR]

Integrating 1D nanomaterials into 3D arrays or hierarchical structures is crucial to unlocking their complete potential in functional applications. This work highlights the significant influence of pH variations on the morphological evolution of three-dimensional zinc oxide foams (ZOFs) at relatively low temperatures, leading to the formation of diverse structures with varying aspect ratios and dimensions. Our findings underscore the role of alkaline conditions in fostering the evolution of dandelion-like 1D nanostructures, attributed to the intricate interplays of reaction kinetics and Ostwald ripening processes. Furthermore, the ZOF demonstrates potential applications in self-cleaning, oil/water separation, and human motion sensing. The ZOF is optimized to exhibit superhydrophobicity (water contact angle = 153 ± 2°) showcasing self-cleaning ability and enhanced oil–water separation performance following surface functionalization. The ZOF exhibits exceptional oil adsorption capacity (10–55 g/g) and superior stability, making it suitable for oil–water separation. Furthermore, our investigations showcase the biocompatibility and practical applicability in oil–water separation, both on surface and underwater, highlighting its efficacy in environmental remediation scenarios. Transitioning to wearable sensing, ZOF exhibits outstanding mechanical (compression strength increases by more than 130%) and piezoresistive characteristics (gauge factor = 1.036), precisely capturing a broad spectrum of human movements and tactile stimuli with rapid response times (∼60 ms). Furthermore, ZOF exhibits stability over 10,000 continuous tapping cycles, indicating the material's ability to maintain its piezoresistive properties over extended use. Overall, the multifaceted functionalities and versatility of the ZOF make it a promising material for environmental remediation, sensor technology, and human–machine interfaces. [ABSTRACT FROM AUTHOR]

Blood-contact devices are prone to inflammation, endothelial dysfunction, coagulation, and the uncontrolled release of metal ions during implantation and service. Therefore, it is essential to make these multifunctional. Herein, a superhydrophobic DE@ZnS-ZnO@SA film (composed of dabigatran ester, zinc sulfite, zinc oxide, and stearic acid, respectively) is produced. The prepared film has non-adhesion and antibacterial properties, superior mechanical stability, durability, corrosion resistance, and is self-cleaning and blood-repellent. The results of the hemolysis, cytotoxicity, and other anticoagulant experiments revealed that the film had good blood compatibility, no cytotoxicity, and excellent anticoagulant properties. The film displays anticoagulant properties even after being immersed in Phosphate-Buffered Saline (PBS) for 7 days. Furthermore, the film can spontaneously release H2S gas for 90 h after soaking in an acidic environment (pH = 6) for 90 h. This property improves the acidic microenvironment of the lesion and promotes the proliferation of endothelial cells by using H2S gas. In addition, the film can inhibit the uncontrollable release of Zn2+ ions, avoiding its toxicity even when immersed in an acid environment for 35 days. This time-sequential functionalized surface has the potential to typify the future of blood-contacting scaffolds for long-lasting use. [ABSTRACT FROM AUTHOR]

Water pollution seriously affects the development of society and human life. There are various kinds of pollutants, including soluble pollutants and insoluble floaters on the water surface. Herein, the photocatalyst semiconductor BiOCl and superhydrophobic functional particles Mg(OH)2 were deposited on the surfaces of canvas and polyester felt to construct superhydrophobic canvas and polyester felt. The contact angles of the synthetic superhydrophobic canvas and polyester felt were measured as 152° and 155.3°, respectively. The selective adsorption of hexadecane was achieved using the wetting difference between the surface of water and pollutants floating on the surface. For dissolved pollutants, the surface wettability needed to be changed with the help of ethanol. The degradation efficiencies were all greater than 90%, demonstrating the versatility of the synthetic superhydrophobic canvas and polyester felt. [ABSTRACT FROM AUTHOR]

Stainless steel (SST) is an important material for a variety of applications including construction, food, and medical. Highly hydrophobic wetting properties enhance the surface properties of SST to support processes such as self‐cleaning. However, applications also require long‐term stability of such properties against chemical and mechanical influences from the environment or technical processes. Therefore, the reduction of highly hydrophobicity of chemically modified, laser‐textured SST surfaces is investigated in relation to abrasive wear using hierarchical structures, micro‐/nanotextured surface, and support structures that shield the highly hydrophobic pattern. Surface textures comprising ridges, grooves (size: 50–500 μm; depth: up to 100 μm), and a nanostructured grooves bottom are machined by infrared ultrashort pulse laser ablation into SST and are subsequently chemically modified by a self‐assembled monolayer of a fluorinated, phosphonic acid‐modified alkane. Abrasive wear tests of these surfaces show decreasing water contact angles with increasing wear of the modified surface of the support structures. However, there is good stability of the highly hydrophobic properties due to the protection of modified areas at the groove bottom. The proposed wetting model for such designed functionalized laser textures shows possibilities for further optimization of such robust highly hydrophobic surfaces and adaptation to specific applications. [ABSTRACT FROM AUTHOR]