Search

Recently, the advent of the non-invasive brain-computer interface (BCI) for continuous decoding of upper limb motions opens a new horizon for motor-disabled people. However, the performance of discrete-decoding BCIs based on discriminating different brain states are still more robust. In this study, we aimed to cascade a discrete state decoder with a continuous decoder to enhance the prediction of hand trajectories. EEG data were recorded from nine healthy subjects performing a center-out task with four orthogonal targets on the horizontal plane. The pre-movement data of each trial has been used for training a binary discrete decoder which identifies the axis of the movement based on common spatial pattern (CSP) features. Two non-parametric continuous decoders based on Gaussian process regression (GPR) have been designed for continuous decoding of hand movements along each axis using the envelope features of EEG signals in six frequency bands. In addition to those four principal orthogonal targets, some targets at random directions on the horizontal plane were recorded to evaluate the generalizability of the proposed model. The discrete decoder attained the average binary classification of 97.1% for discriminating movement along the x-axis and y-axis. The proposed state-based method achieved the mean correlation coefficient of 0.54 between actual and predicted trajectories for principal targets over all subjects. The trajectories of random targets were also decoded with a mean correlation of 0.37. The generalizability of the proposed paradigm proved by the findings of this study could open new possibilities in developing novel types of neuroprostheses for rehabilitation purposes.

The continuous decoding of human movement intention based on electroencephalogram (EEG) signals is valuable for developing a more natural motor augmented or assistive system instead of its discrete classifications. The classic center-out paradigm has been widely used to study discrete and continuous hand movement parameter decoding. However, when applying it in studying continuous movement decoding, the classic paradigm needs to be improved to increase the decoding performance, especially generalization performance. In this paper, we first discuss the limitations of the classic center-out paradigm in exploring the hand movement’s continuous decoding. Then, an improved paradigm is proposed to enhance the continuous decoding performance. Besides, an adaptive decoder-ensemble framework is developed for continuous kinematic parameter decoding. Finally, with the improved center-out paradigm and the ensemble decoding framework, the average Pearson’s correlation coefficients between the predicted and recorded movement kinematic parameters improve significantly by about 75 percent for the directional parameters and about 10 percent for the non-directional parameters. Furthermore, its generalization performance improves significantly by about 20 percent for the directional parameters. This study indicates the advantage of the improved paradigm in predicting the hand movement’s kinematic information from low-frequency scalp EEG signals. It can advance the applications of the noninvasive motor brain-computer interface (BCI) in rehabilitation, daily assistance, and human augmentation areas.

The continuous decoding of human movement intention based on electroencephalogram (EEG) signals is valuable for developing a more natural motor augmented or assistive system instead of its discrete classifications. The classic center-out paradigm has been widely used to study discrete and continuous hand movement parameter decoding. However, when applying it in studying continuous movement decoding, the classic paradigm needs to be improved to increase the decoding performance, especially generalization performance. In this paper, we first discuss the limitations of the classic center-out paradigm in exploring the hand movement’s continuous decoding. Then, an improved paradigm is proposed to enhance the continuous decoding performance. Besides, an adaptive decoder-ensemble framework is developed for continuous kinematic parameter decoding. Finally, with the improved center-out paradigm and the ensemble decoding framework, the average Pearson’s correlation coefficients between the predicted and recorded movement kinematic parameters improve significantly by about 75 percent for the directional parameters and about 10 percent for the non-directional parameters. Furthermore, its generalization performance improves significantly by about 20 percent for the directional parameters. This study indicates the advantage of the improved paradigm in predicting the hand movement’s kinematic information from low-frequency scalp EEG signals. It can advance the applications of the noninvasive motor brain-computer interface (BCI) in rehabilitation, daily assistance, and human augmentation areas. [ABSTRACT FROM AUTHOR]

In this paper, a novel fully-automated state-based decoding method has been proposed for continuous decoding problems in brain-machine interface (BMI) systems, called Gaussian mixture of model (GMM)-assisted PLS (GMMPLS). In contrast to other state-based and hierarchical decoders, the proposed method does not demand any prior information about the desired output structure. Instead, GMMPLS uses the GMM algorithm to divide the desired output into a specific number of states (clusters). Next, a logistic regression model is trained to predict the probability membership of each time sample for each state. Finally, using the concept of the partial least square (PLS) algorithm, GMMPLS constructs a model for decoding the desired output using the input data and the achieved membership probabilities. The performance of the GMMPLS has been evaluated and compared to PLS, the nonlinear quadratic PLS (QPLS), and the bayesian PLS (BPLS) methods through a simulated dataset and two different real-world BMI datasets. The achieved results demonstrated that the GMMPLS significantly outperformed PLS, QPLS, and BPLS overall datasets.

Continuous decoding is a crucial step in many types of brain-computer interfaces (BCIs). Linear regression techniques have been widely used to determine a linear relation between the input and desired output. A serious issue in this technique is the over-fitting phenomenon. Partial least square (PLS) is a well-known and popular method which tries to overcome this problem. PLS calculates a set of latent variables which are maximally correlated to the output and determines a linear relation between a low-rank estimation of the input and output data. However, this method has shown its potential to overfit the training data in many cases. In this paper, a regularized version of PLS (RPLS) is proposed which tries to determine a linear relation between the latent vector of the input and desired output using the regularized least square instead of the ordinary one. This approach is able to control the effect of non-efficient and non-generalized latent vectors in prediction. We have shown that the proposed method outperforms Ridge regression (RR), PLS, and PLS with regularized weights (PLSRW) in estimating the output in two different real BCI datasets, Neurotycho public electrocorticogram (ECoG) dataset for decoding trajectory of hand movements in monkeys and our own local field potential (LFP) dataset for decoding applied force performed by rats. Furthermore, the results indicate that RPLS is more robust against the increase in the number of latent vectors compared to PLS and PLSRW. Next, we evaluated the resistance of our proposed method against the presence of different noise levels in a BCI application and compared it to other techniques using a semi-simulated dataset. This approach revealed that RPLS offered a higher performance compared with other techniques in all levels of noise. Finally, to illustrate the usability of RPLS in other type of data, we presented the application of this method in predicting relative active substance content of pharmaceutical tablets using near-infrared (NIR) transmittance spectroscopy data. This application showed a superior performance of the proposed method compared to other decoding methods. [ABSTRACT FROM AUTHOR]

Objective: This study aimed to decode shoulder, elbow and wrist dynamic movements continuously and simultaneously based on multi-channel surface electromyography signals, useful for electromyography controlled exoskeleton robots for upper-limb rehabilitation. Methods: Ten able-bodied subjects and ten stroke subjects were instructed to voluntarily move the shoulder, elbow and wrist joints back and forth in a horizontal plane with an exoskeleton robot. The shoulder, elbow and wrist movements and surface electromyography signals from six muscles crossing the joints were recorded. A set of three parallel linear-nonlinear cascade decoders was developed to continuously estimate the selected shoulder, elbow and wrist movements based on a generalized linear model using the anterior deltoid, posterior deltoid, biceps brachii, long head triceps brachii, flexor carpi radialis, and extensor carpi radialis muscle electromyography signals as the model inputs. Results: The decoder performed well for both healthy and stroke populations. As movement smoothness decreased, decoding performance decreased for the stroke population. Conclusion: The proposed method is capable of simultaneously and continuously estimating multi-joint movements of the human arm in real-time by characterizing the nonlinear mappings between muscle activity and kinematic signals based on linear regression. Significance: This may prove useful in developing myoelectric controlled exoskeletons for motor rehabilitation of neurological disorders. [ABSTRACT FROM AUTHOR]

Among the potential biological signals for human-machine interactions (brain, nerve, and muscle signals), electromyography (EMG) widely used in clinical setting can be obtained non-invasively as motor commands to control movements. The aim of this study was to develop a model for continuous and simultaneous decoding of multi-joint dynamic arm movements based on multi-channel surface EMG signals crossing the joints, leading to application of myoelectrically controlled exoskeleton robots for upper-limb rehabilitation. Twenty subjects were recruited for this study including 10 stroke subjects and 10 able-bodied subjects. The subjects performed free arm reaching movements in the horizontal plane with an exoskeleton robot. The shoulder, elbow and wrist movements and surface EMG signals from six muscles crossing the three joints were recorded. A non-linear autoregressive exogenous (NARX) model was developed to continuously decode the shoulder, elbow and wrist movements based solely on the EMG signals. The shoulder, elbow and wrist movements were decoded accurately based only on the EMG inputs in all the subjects, with the variance accounted for (VAF) > 98% for all three joints. The proposed approach is capable of simultaneously and continuously decoding multi-joint movements of the human arm by taking into account the non-linear mappings between the muscle EMGs and joint movements, which may provide less effortful control of robotic exoskeletons for rehabilitation training of individuals with neurological disorders and arm impairment.

• Regularized Kalman Filter is a linear method with low computational time and complexity • This method is suitable for processing signals with high-dimensional features • The signal predicted by this method is more consistent than other linear methods • The proposed method shown to be effective for BCI applications using LFP signals Brain-computer interfaces (BCIs) seek to establish a direct connection from brain to computer, to use in applications such as motor prosthesis control, control of a cursor on the monitor, and so on. Hence, the accuracy of movement decoding from brain signals in BCIs is crucial. The Kalman filter (KF) is often used in BCI systems to decode neural activity and estimate kinetic and kinematic parameters. To use the KF, the state transition matrix, the observation matrix and the covariance matrices of the process and measurement noises must be known in advance, however, in many applications these matrices are not known. Typically, to estimate these parameters, the ordinary least squares method and the sample covariance matrix estimator are used. Our purpose is to enhance the decoding performance of the KF in BCI systems by improving the estimation of the mentioned parameters. Here, we propose the Regularized Kalman Filter (RKF) which implements two fundamental features: 1) Regularizing the regression estimate of the state equation to improve the estimation of the state transition matrix, and 2) Use of shrinkage method to improve the estimation of the unknown measurement noise covariance matrix. We validated the performance of the proposed method using two datasets of local field potentials obtained from motor cortex of a monkey (Estimation of kinematic parameters during hand movement) and three rats (Estimation of the amount of force applied by hand as a kinetic parameter). The results demonstrate that the proposed method outperforms the conventional KF, the KF with feature selection, the Partial least squares, and the Ridge regression approaches. [ABSTRACT FROM AUTHOR]

Among the potential biological signals for human-machine interactions (brain, nerve, and muscle signals), electromyography (EMG) widely used in clinical setting can be obtained non-invasively as motor commands to control movements. The aim of this study was to develop a model for continuous and simultaneous decoding of multi-joint dynamic arm movements based on multi-channel surface EMG signals crossing the joints, leading to application of myoelectrically controlled exoskeleton robots for upper-limb rehabilitation. Twenty subjects were recruited for this study including 10 stroke subjects and 10 able-bodied subjects. The subjects performed free arm reaching movements in the horizontal plane with an exoskeleton robot. The shoulder, elbow and wrist movements and surface EMG signals from six muscles crossing the three joints were recorded. A non-linear autoregressive exogenous (NARX) model was developed to continuously decode the shoulder, elbow and wrist movements based solely on the EMG signals. The shoulder, elbow and wrist movements were decoded accurately based only on the EMG inputs in all the subjects, with the variance accounted for (VAF) > 98% for all three joints. The proposed approach is capable of simultaneously and continuously decoding multi-joint movements of the human arm by taking into account the non-linear mappings between the muscle EMGs and joint movements, which may provide less effortful control of robotic exoskeletons for rehabilitation training of individuals with neurological disorders and arm impairment.