Search

Aiming at solving the problem of forecasting the dynamics of express delivering quality elements classification, the paper proposed a novel method integrating Kano model with GM(1,1) model which is effective to perform fitting prediction. An approach of fuzzy questionnaires to modify Kano questionnaires which considered as subjective is suggested, and the GM (1,1) model is used to estimate and predict data according to the quality classification of fuzzy Kano model. An empirical study in express industry is provided to testify its feasibility and validity.

Least-squares fitting was employed to interpolate the reflect point, ghost body-cell method (GBCM) was applied to quadtree-based adaptively refined Cartesian grid approach, and finite volume method was employed to solve Euler equations. Shape of cut cell kept in accordance with that in the flow field which efficiently relieved the time step restriction of small cut cells. Flows around a circular cylinder and the double NACA0012 airfoils are simulated and compared with published structured grid results, which show flow field around complex geometries is adequately resolved resort to GBCM approach on adaptively refined Cartesian grid in computational fluid dynamics (CFD).

A novel adaptive method for singular geometric regions was proposed. Combined with conventional cut cell adaption, curvature cell adaption and solution adaption, adaptively refined Cartesian grid was automatically generated after geometries had been specified by users. Solid wall boundary was implemented by ghost body-cell method which efficiently relieved the time step restriction of small cut cells. Flow field was well resolved on adaptively refined Cartesian grid with finite volume method. Transonic flow around the RAE2822 airfoil and subsonic flow around the Suddhoo four-element airfoil are carefully investigated, which validate the efficiency of current approach and its feasibility in complicated geometric regions.

In this investigation, a novel water-insoluble slow-release fertilizer, biuret polyphosphoramide (BPAM), was formulated and synthesized from urea, phosphoric acid (H(3)PO(4)), and ferric oxide (Fe(2)O(3)). The structure of BPAM was characterized by Fourier transform infrared (FTIR) spectroscopy. Subsequently, a coated slow-release BPAM fertilizer with superabsorbent was prepared by ionic cross-linked carboxymethylchitosan (the core), acrylic acid, acrylamide, and active carbon (the coating). The variable influences on the water absorbency were investigated and optimized. Component analysis results showed that the coated slow-release BPAM contained 5.66% nitrogen and 11.7% phosphorus. The property of water retention, the behavior of slow release of phosphorus, and the capacity of adsorption of cations were evaluated, and the results revealed that the product not only had good slow-release property and excellent water retention capacity but also higher adsorption capacities of cations in saline soil.

In the present paper the effects of different digestion methods on determining the amount of metal elements in the plant platycodon grandi florum (Jacq.) A. DC. by flame atomic absorption spectrophotometry(FAAS) are reported. FAAS method was established for the determination of K, Mg, Ca, Cu, Zn, Mn, Fe, Co, Ni, Cd and Cr and Pb in the plant platycodon grandi florum (Jacq.) A. DC. The samples were incinerated and followed by digestion with HNO3-HClO (phi, 4 : 1) at 90-95 degrees C and normal pressure. In the meantime, the optimum parameters of FAAS and effects of solution medium on the results were discussed. The analytical results of K, Mg, Ca, Mn, Fe, Cu and Zn were 13 226.32, 922.57, 1 710.72, 9.23, 336.66, 8.75 and 19.62 microg x g(-1) respectively, while Co, Ni, Cd, Cr and Pb were not checked out in the samples. The results showed that the recovery of standard addition was 95.45Y-105.50% and the relative standard deviation (n = 9) was 0.34%-5.78%. The method is quick, simple and convenient, and the results are satisfactory.

The objective of the paper is to determine the amount of metal elements of Na, K, Mg, Ca, Cu, Zn, Mn, Fe, Co, Ni, Cd, Cr and Pb in the planted Foeniculum vulgare Mill. by flame atomic absorption spectrophotometry (FAAS), after the cinefaction and the digestion with HNO3-HClO4 (phi 4:1) at 90-95 degrees C and normal pressure. The optimum parameters of FAAS and the effects of solution medium on the results were investigated. The analytical results show that the amount of Na, K, Mg, Ca, Mn, Fe, Cu, Zn and Pb was 1508.7, 27653.0, 2036.0, 4848.1, 24.8, 323.5, 15.2, 23.7 and 10.8 microg x g(-1), respectively, and that of Co, Ni, Cd and Cr was not checked out in the samples. The recovery of standard addition is 97.45%-102.50%, the relative standard deviation (n=9) was 0.34%-2.77%. The characteristic method is quick, simple and convenient and the results are satisfactory.

A FAAS method was established for the determination of Na, K, Mg, Ca, Cu, Zn, Fe, Mn, Ni, Co, Pb, Cr, Cd, Ag and Au in Cynomorium songaricum after digestion with HNO3-HClO4 (phi 4:1) at 90-95 degrees C and at normal pressure. In this paper, the parameters in FAAS were studied. The analytical results of Na, K, Mg, Ca, Fe, Zn, Cu, Mn, Pb, Ni and Ag were 13,572.0, 14,260.0, 358.3, 168.3, 238.5, 19.4, 5.9, 3.4, 2.6, 1.3 and 0.4 microg x g(-1) respectively and Co, Cr, Cd and Au were not found in the samples. The results showed that the recovery of standard addition was 97.8%-104.5%, and the relative standard deviation (n = 9) was 0.2%-5.0%. The method is fast, simple and convenient. The results were satisfactory.

Reliability optimization for FMS (flexible manufacturing system) is very important. Traditional optimal algorithms applying to FMS reliability have many shortcomings. In this article, the authors take into account the characteristics of FMS and bring forward modular neural networks (NN) model based on genetic algorithm (GA) to optimize FMS reliability. Modular NN based on GA has good convergence and short learning time. The example shows that the new algorithm is feasible and effective.

The evaluation of credit guarantee risk (CGR) involves many complex problems such as how to quantify risk, how to express causal relationships of risk factors, how to fuse all kinds of information and evaluate risk with uncertainties. Thus the evaluation of CGR is very difficult because of its uncertainty and diverse information. Bayesian belief networks (BBN) are basically a framework for reasoning uncertainty and diverse information. This paper presents BBN as a new methodology to evaluate CGR. An example is presented by using the BBN method.