Search

Oxidative methane (CH

Generation and manipulation of phonon polaritons are of paramount importance for understanding the interaction between an electromagnetic field and dielectric materials and furthering their application in mid-infrared optical communication. However, the formation of tunable one-dimensional phonon polaritons has been rarely realized in van der Waals layered structures. Here we report the discovery of curvature-induced phonon polaritons localized at the crease of folded hexagonal boron nitrides (

Atomically dispersed catalysts such as single-atom catalysts have been shown to be effective in selectively oxidizing methane, promising a direct synthetic route to value-added oxygenates such as acetic acid or methanol. However, an important challenge of this approach has been that the loading of active sites by single-atom catalysts is low, leading to a low overall yield of the products. Here, we report an approach that can address this issue. It utilizes a metal-organic framework built with porphyrin as the linker, which provides high concentrations of binding sites to support atomically dispersed rhodium. It is shown that up to 5 wt% rhodium loading can be achieved with excellent dispersity. When used for acetic acid synthesis by methane oxidation, a new benchmark performance of 23.62 mmol·gcat-1·h-1 was measured. Furthermore, the catalyst exhibits a unique sensitivity to light, producing acetic acid (under illumination, up to 66.4% selectivity) or methanol (in the dark, up to 65.0% selectivity) under otherwise identical reaction conditions.

Spatially resolved vibrational mapping of nanostructures is indispensable to the development and understanding of thermal nanodevices1, modulation of thermal transport2 and novel nanostructured thermoelectric materials3–5. Through the engineering of complex structures, such as alloys, nanostructures and superlattice interfaces, one can significantly alter the propagation of phonons and suppress material thermal conductivity while maintaining electrical conductivity2. There have been no correlative experiments that spatially track the modulation of phonon properties in and around nanostructures due to spatial resolution limitations of conventional optical phonon detection techniques. Here we demonstrate two-dimensional spatial mapping of phonons in a single silicon–germanium (SiGe) quantum dot (QD) using monochromated electron energy loss spectroscopy in the transmission electron microscope. Tracking the variation of the Si optical mode in and around the QD, we observe the nanoscale modification of the composition-induced red shift. We observe non-equilibrium phonons that only exist near the interface and, furthermore, develop a novel technique to differentially map phonon momenta, providing direct evidence that the interplay between diffuse and specular reflection largely depends on the detailed atomistic structure: a major advancement in the field. Our work unveils the non-equilibrium phonon dynamics at nanoscale interfaces and can be used to study actual nanodevices and aid in the understanding of heat dissipation near nanoscale hotspots, which is crucial for future high-performance nanoelectronics.

Chemical bonds fundamentally determine molecular properties and are prevalently characterized by various spectroscopic means such as infrared and Raman spectroscopies. However, the spatial resolution of these conventional approaches is insufficient to reveal nanoscale features. Recently, monochromated electron energy-loss spectroscopy (EELS) in the transmission electron microscope achieved a groundbreaking energy resolution of a few millielectronvolts and enabled direct observation of molecular vibrational spectrum with unmatched spatial resolution. Vibrational EELS is widely applicable to both organic and inorganic matter in the solid state or liquid phase. In this review, we introduce recent advancements and key concepts of this method, compare with other spectroscopic techniques, and discuss future developments for potential applications in research fields centered on catalysts, polymers, and live cells.

In recent years, La2Ti2O7 (LTO)-based piezoelectric materials, which belong to the perovskite-like layered structure (PLS) materials, have become candidates in the elevated temperature piezoelectri...

Two-dimensional electron gas or hole gas (2DEG or 2DHG) and their functionalities at artificial heterostructure interfaces have attracted extensive attention in recent years. Many theoretical calculations and recent experimental studies have shown the formation of alternating 2DEG and 2DHG at ferroelectric/insulator interfaces, such as BiFeO3/TbScO3, depending on the different polarization states. However, a direct observation based on the local charge distribution at the BiFeO3/TbScO3 interface has yet to be explored. Herein we demonstrate the direct observation of 2DHG and 2DEG at BiFeO3/TbScO3 interface using four-dimensional scanning transmission electron microscopy and Bader charge analysis. The results show that the measured charge state of each Fe/O columns at the interface undergoes a significant increase/reduction for the polarization state pointing away/toward the interface, indicating the existence of 2DHG/2DEG. This method opens up a path of directly observing charge at atomic scale and provides new insights into the design of future electronic nanodevices.

Electrocatalytic reduction of waste nitrates (NO3-) enables the synthesis of ammonia (NH3) in a carbon neutral and decentralized manner. Atomically dispersed metal-nitrogen-carbon (M-N-C) catalysts with varying metal centers uniquely favor mono-nitrogen products (e.g., NH3), as well as provide synergistic supports for nanoparticle catalysts. But the reaction fundamentals remain largely underexplored. Herein, we report a set of 3d-, 4d-, 5d- and f-block atomically dispersed M-N-C catalysts with a well-defined M-Nx coordination. The selectivity and activity of NO3- reduction to NH3 in neutral media were thoroughly studied, with a specific focus on deciphering the role of the NO2- intermediate in the reaction cascade, wherein strong correlations (R=0.9) were found between the NO2- reduction activity and NO3- reduction selectivity for NH3. Moreover, theoretical computations identified the associative/dissociative adsorption pathways for NO2- evolution, over the normal M-N4 sites and their oxo-form (O-M-N4) for certain oxyphilic metals. The free energies for the reductive adsorption of nitrate [∗ + NO3− → ∗NO2 ], correlated strongly with experimental NH3 selectivity. This work provides a platform for designing multielement NO3RR cascades with single-atom sites or their hybridization with extended catalytic surfaces.

Summary The scalable preparation of high-purity monolayers is essential for practically integrating two-dimensional (2D) semiconductors in diverse technologies but remains a persistent challenge. Previous efforts to exfoliate 2D layered crystals by the organic ammonium intercalation usually produce few-layer nanosheets owing to a self-retarding effect that hinders the complete intercalation in neighboring layers. Herein, we report a unique “intercalation and separation” chemistry with a constant self-refreshing crystal surface that mitigates the self-retarding effect to ensure a complete intercalation of the bulk crystal, ultimately enabling high-yield solution-phase exfoliation of 2D semiconductor monolayers in excellent purity (e.g., monolayer purity of >95% for In2Se3 and InSe). Furthermore, we have assembled large-area organic/inorganic hybrid superlattices with diverse organic molecules and inorganic 2D monolayer crystals, thus creating a family of artificial superlattice materials with atomically modulated chemical compositions, widely tunable superlattice periodicities, and specifically tailorable electronic and thermal properties.

Two-dimensional (2D) PtSe2 has emerged as a promising ultrathin electrocatalyst due to its excellent catalytic activity and conductivity. However, the PtSe2 basal plane is inert for the hydrogen evolution reaction (HER), which greatly limits its electrocatalytic performance. Here, in light of theoretical calculations, we designed a facile approach for activating the 2D PtSe2 basal plane for the HER by simultaneously introducing atomic vacancies of Se, Pt, and Pt clusters through a mild Ar plasma treatment. We tracked changes in the structures and catalytic performance of PtSe2 by combining microscopic imaging, spectroscopic mapping, and electrochemical measurements in microcells. The highest performance of the activated PtSe2 basal plane that we obtained was superior to those of other 2D transition metal dichalcogenide-based electrocatalysts measured in microcells in terms of the overpotential, the Tafel slope, and the exchange current density. This study demonstrates the great potential of activated 2D PtSe2 as an ultrathin catalyst for the HER and provides new insights on the rational design of 2D electrocatalysts.

As a multi-base source traditional Chinese medicine, the hepatotoxicity of Uncariae Ramulus Cum Uncis (URCU) has been reported repeatedly in recent years. The lack of clarity of toxic components and toxicity mechanisms is a key issue that needs to be addressed. In this article, a "component-target-pathway" network strategy was established to firstly predicting the hepatotoxic components and the toxicity mechanism of URCU. Ultra-performance liquid chromatography quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF/MS) and data post-processing technology were used to classify and identify the main components in Uncaria rhynchophylla (Miq.) Miq. ex Havil. (UR) and Uncaria sinensis (Oliv.) Havil. (US). Then, the potential hepatotoxic components were screened by network pharmacology and molecular docking. As a result, 40 components and 39 ingredients were identified in UR and US, respectively. Cadambine, rhynchophylline, corynoxeine, isocorynoxeine, strictosamide and mitraphylline were screened as the potential hepatotoxic ingredients contained both in UR and US. The network pharmacology showed that the potential hepatotoxic components could affect the IL-17 signaling pathway by regulating related targets such as MAPK1 and MAPK14, which might lead to the occurrence of liver injury. This study not only provided a reasonable strategy for the rapid screening of hepatotoxic components in URCU, but also supplied reference and guidance for the rational clinical application and scientific supervision of URCU.

Crystal defects affect the thermal and heat-transport properties of materials by scattering phonons and modifying phonon spectra1–8. To appreciate how imperfections in solids influence thermal conductivity and diffusivity, it is thus essential to understand phonon–defect interactions. Sophisticated theories are available to explore such interactions, but experimental validation is limited because most phonon-detecting spectroscopic methods do not reach the high spatial resolution needed to resolve local vibrational spectra near individual defects. Here we demonstrate that space- and angle-resolved vibrational spectroscopy in a transmission electron microscope makes it possible to map the vibrational spectra of individual crystal defects. We detect a red shift of several millielectronvolts in the energy of acoustic vibration modes near a single stacking fault in cubic silicon carbide, together with substantial changes in their intensity, and find that these changes are confined to within a few nanometres of the stacking fault. These observations illustrate that the capabilities of a state-of-the-art transmission electron microscope open the door to the direct mapping of phonon propagation around defects, which is expected to provide useful guidance for engineering the thermal properties of materials. State-of-the-art electron energy-loss spectroscopy in a transmission electron microscope maps the detailed phonon spectra of single defects in silicon carbide

Renewable electricity-driven water splitting provides a pathway to manufacturing hydrogen as a promising alternative to fossil fuels. A typical water electrolysis device is comprised of a cathodic hydrogen evolution reaction (HER) and an anodic oxygen evolution reaction (OER). Unfortunately, the OER consumes most of the overall electricity supply while generating negligible economic value, which inhibits the large-scale deployment of the water electrolysis technology. Here, we explored alternatives to the OER and demonstrated that electrooxidation of glycerol (a cheap byproduct of biodiesel and soap production) could lower anodic electricity consumption by up to 0.27 V while producing high-value formic acid with 96.2% faradaic efficiency (FE). Further, glycerol electrooxidation was combined with the photoelectrochemical HER to diminish the electricity requirement to 1.15 V, reducing the electricity consumption by ∼30% relative to typical water electrolysis. This study suggests that solar-assisted co-electrolysis of high-volume block chemicals and water may be an energy efficient and economically viable strategy to realize the sustainable production of value-added chemicals and hydrogen energy.