Search

A common feature shared by myosin-binding proteins from a wide variety of species is the presence of a variable number of related internal motifs homologous to either the Ig C2 or the fibronectin (Fn) type III repeats. Despite interest in the potential function of these motifs, no group has clearly demonstrated a function for these sequences in muscle, either intra- or extracellularly. We have completed the nucleotide sequence of the fast type isoform of MyBP-C (C protein) from chicken skeletal muscle. The deduced amino acid sequence reveals seven Ig C2 sets and three Fn type III motifs in MyBP-C. alpha-chymotryptic digestion of purified MyBP-C gives rise to four peptides. NH2-terminal sequencing of these peptides allowed us to map the position of each along the primary structure of the protein. The 28-kD peptide contains the NH2-terminal sequence of MyBP-C, including the first C2 repeat. It is followed by two internal peptides, one of 5 kD containing exclusively spacer sequences between the first and second C2 motifs, and a 95-kD fragment containing five C2 domains and three fibronectin type III motifs. The C-terminal sequence of MyBP-C is present in a 14-kD peptide which contains only the last C2 repeat. We examined the binding properties of these fragments to reconstituted (synthetic) myosin filaments. Only the COOH-terminal 14-kD peptide is capable of binding myosin with high affinity. The NH2-terminal 28-kD fragment has no myosin-binding, while the long internal 100-kD peptide shows very weak binding to myosin. We have expressed and purified the 14-kD peptide in Escherichia coli. The recombinant protein exhibits saturable binding to myosin with an affinity comparable to that of the 14-kD fragment obtained by proteolytic digestion (1/2 max binding at approximately 0.5 microM). These results indicate that the binding to myosin filaments is mainly restricted to the last 102 amino acids of MyBP-C. The remainder of the molecule (1,032 amino acids) could interact with titin, MyBP-H (H protein) or thin filament components. A comparison of the highly conserved Ig C2 domains present at the COOH-terminus of five MyBPs thus far sequenced (human slow and fast MyBP-C, human and chicken MyBP-H, and chicken MyBP-C) was used to identify residues unique to these myosin-binding Ig C2 repeats.

Purpose: Zirconia ceramics, a biocompatible material with favorable mechanical properties, has been suggested for use in the manufacture of dental implants instead of the commonly used titanium. Not much data exist on the early healing response around zirconia dental implants. The aim of this study was to give a descriptive histologic assessment of the degree of early bone apposition around zirconia dental implants at 2 and 4 weeks after insertion compared to surface-modified titanium implants. Materials and Methods: Four zirconia and 4 titanium implants were placed in New Zealand white male rabbits. One implant was inserted in the condyle of each distal femur. Specimens were harvested at 2 and 4 weeks and processed with light microscopic analysis. The area of bone-implant contact was evaluated histomorphometrically. Results: A high degree of bone apposition could be observed on all implants at both time points. Differences in the percentage of implant surface covered with bone were noted between the 2 time points, with comparable results for the 2 materials. Conclusion: The results of this limited histologic study demonstrate a similar rate of bone apposition on zirconia and surface-modified titanium implant surfaces during early healing. To confirm these results, further studies need to be conducted, involving larger sample size at more time points. [ABSTRACT FROM AUTHOR]

PURPOSE: The aim of the present study was to test whether a newly developed synthetic matrix made of polyethylene-glycol (PEG) containing a covalently bound peptide of the parathyroid hormone (PTH1-34) enhances bone regeneration compared to grafting procedures and to spontaneous healing. MATERIALS AND METHODS: In each of 16 rabbits used, 4 titanium cylinders were screwed into perforated slits made in the cortical bone of the calvaria. The cylinders were either left empty (control) or filled with 1 of the following: (1) PEG matrix and hydroxyapatite/tricalcium phosphate (HA/TCP) granules, (2) PEG matrix containing 100microg/mL of PTH and HA/TCP granules, or (3) PEG matrix containing 20microg/mL of PTH1-34 and HA/TCP granules. After 8 weeks, the animals were sacrificed, and ground sections were obtained for histology. RESULTS: Quantitative histomorphometry demonstrated a significantly increased amount of newly formed bone for PTH1-34 compared to sites treated with PEG and HA/TCP and to empty control sites (P < .01; analysis of variance and subsequent pairwise Student t test). The mean percentages of mineralized bone were 19.6%+/-6.0% for 100 microg/mL PTH, 18.0% +/- 6.2% for 20microg/mL PTH, 12.0% +/-6.5% for PEG and HA/TCP without PTH, and 10.5% +/-3.7% for the empty control. The mean areas of bone regenerated within the cylinders were 53.5% +/-22.7% for 100 microg/mL PTH, 51.1% +/-22.6% for 20 microg/mL PTH, 34.3% +/- 22.5% for PEG and HA/TCP without PTH, and 23.2% +/-10.1% for the empty control. DISCUSSION: Human and animal trials have demonstrated that daily systemic injection of PTH increases bone mineral density. The present study showed that local administration of PTH was also effective in stimulating bone formation. CONCLUSION: It is concluded that this synthetic PEG hydrogel containing a covalently bound peptide of the PTH combined with HA/TCP granules significantly stimulated in situ bone augmentation in rabbits. [ABSTRACT FROM AUTHOR]

Additive manufacturing has emerged as a transformative tool in biomedical engineering, offering precise control over scaffold design for bone tissue engineering and regenerative medicine. While much attention has been focused on optimizing pore-based scaffold architectures, filament-based microarchitectures remain relatively understudied, despite the fact that the majority of 3D-printers generate filament-based structures. Here, we investigated the influence of filament characteristics on bone regeneration outcomes using a lithography-based additive manufacturing approach. Three distinct filament-based scaffolds (Fil050, Fil083, and Fil125) identical in macroporosity and transparency, crafted from tri-calcium phosphate (TCP) with varying filament thicknesses and distance, were evaluated in a rabbit model of bone augmentation and non-critical calvarial defect. Additionally, two scaffold types differing in filament directionality (Fil and FilG) were compared to elucidate optimal design parameters. Distance of bone ingrowth and percentage of regenerated area within scaffolds were measured by histomorphometric analysis. Our findings reveal filaments of 0.50 mm as the most effective filament-based scaffold, demonstrating superior bone ingrowth and bony regenerated area compared to larger size filament (i.e., 0.83 mm and 1.25 mm scaffolds). Optimized directionality of filaments can overcome the reduced performance of larger filaments. This study advances our understanding of microarchitecture's role in bone tissue engineering and holds significant implications for clinical practice, paving the way for the development of highly tailored, patient-specific bone substitutes with enhanced efficacy., Competing Interests: The authors confirm that there are no known conflicts of interest associated with this publication, and there has been no significant financial support for this work that could have influenced its outcome.

Triply periodic minimal surface microarchitectures (TPMS) were developed by mathematicians and evolved in all kingdoms of living organisms. Renowned for their lightweight yet robust attributes, TPMS structures find application in diverse fields, such as the construction of satellites, aircrafts, and electric vehicles. Moreover, these microarchitectures, despite their intricate geometric patterns, demonstrate potential for application as bone substitutes, despite the inherent gothic style of natural bone microarchitecture. Here, we produced three TPMS microarchitectures, D-diamond, G-gyroid, and P-primitive, by 3D printing from hydroxyapatite. We explored their mechanical characterization and, further, implanted them to study their bone augmentation and osteoconduction potential. In terms of strength, the D-diamond and G-gyroid performed significantly better than the P-primitive. In a calvarial defect model and a calvarial bone augmentation model, where osteoconduction is determined as the extent of bony bridging of the defect and bone augmentation as the maximal vertical bone ingrowth, the G-gyroid performed significantly better than the P-primitive. No significant difference in performance was observed between the G-gyroid and D-diamond. Since, in real life, the treatment of bone deficiencies in patients comprises elements of defect bridging and bone augmentation, ceramic scaffolds with D-diamond and G-gyroid microarchitectures appear as the best choice for a TPMS-based scaffold in bone tissue engineering.

Background: Beta-tricalcium phosphate (β-TCP) is a biocompatible ceramic material widely used in the field of oral regeneration. Due to its excellent biological and mechanical properties, it is increasingly utilized for alveolar ridge augmentation or guided bone regeneration (GBR). With recent advances in computer-aided design and manufacturing (CAD/CAM), β-TCP can now be used in the form of digitally designed patient-specific scaffolds for customized bone regeneration (CBR) of advanced defects in a two-stage implant therapy concept. In this case report following the CARE case report guidelines, we present a novel application of a patient-specific β-TCP scaffold in pre-implant mandibular alveolar ridge augmentation., Case Presentation: A 63-year-old female patient with significant horizontal bone loss in the posterior mandible was treated with a custom β-TCP scaffold in the context of a two-stage backward-planned implant therapy. Cone-beam computed tomography nine months after augmentation showed successful integration of the scaffold into the surrounding bone, allowing implant placement. Follow-up until two years after initial surgery showed excellent oral and peri-implant health., Conclusions: This case highlights the potential of patient-specific β-TCP scaffolds for alveolar ridge augmentation and their advantage over traditional techniques, including avoidance of xeno-, allo-, and autografts. The results provide encouraging evidence for their use in clinical practice. Patient-specific β-TCP scaffolds may be a promising alternative for clinicians seeking to provide their patients with safe, predictable, and effective alveolar ridge augmentation results in customized bone regeneration procedures., (© 2024. The Author(s).)

The functionalization of bone substitutes with exosomes appears to be a promising technique to enhance bone tissue formation. This study investigates the potential of exosomes derived from bone marrow mesenchymal stromal cells (BMSCs) to improve bone healing and bone augmentation when incorporated into wide open-porous 3D-printed ceramic Gyroid scaffolds. We demonstrated the multipotent characteristics of BMSCs and characterized the extracted exosomes using nanoparticle tracking analysis and proteomic profiling. Through cell culture experimentation, we demonstrated that BMSC-derived exosomes possess the ability to attract cells and significantly facilitate their differentiation into the osteogenic lineage. Furthermore, we observed that scaffold architecture influences exosome release kinetics, with Gyroid scaffolds exhibiting slower release rates compared to Lattice scaffolds. Nevertheless, in vivo implantation did not show increased bone ingrowth in scaffolds loaded with exosomes, suggesting that the scaffold microarchitecture and material were already optimized for osteoconduction and bone augmentation. These findings highlight the lack of understanding about the optimal delivery of exosomes for osteoconduction and bone augmentation by advanced ceramic scaffolds.

The clinical standard therapy for large bone defects, typically addressed through autograft or allograft donor tissue, faces significant limitations. Tissue engineering offers a promising alternative strategy for the regeneration of substantial bone lesions. In this study, we harnessed poly(ethylene glycol) (PEG)-based hydrogels, optimizing critical parameters including stiffness, incorporation of arginine-glycine-aspartic acid (RGD) cell adhesion motifs, degradability, and the release of BMP2 to promote bone formation. In vitro we demonstrated that human bone marrow derived stromal cell (hBMSC) proliferation and spreading strongly correlates with hydrogel stiffness and adhesion to RGD peptide motifs. Moreover, the incorporation of the osteogenic growth factor BMP2 into the hydrogels enabled sustained release, effectively inducing bone regeneration in encapsulated progenitor cells. When used in vivo to treat calvarial defects in rats, we showed that hydrogels of low and intermediate stiffness optimally facilitated cell migration, proliferation, and differentiation promoting the efficient repair of bone defects. Our comprehensive in vitro and in vivo findings collectively suggest that the developed hydrogels hold significant promise for clinical translation for bone repair and regeneration by delivering sustained and controlled stimuli from active signaling molecules., (© 2024. The Author(s).)

Triply periodic minimal surfaces (TPMSs) are found to be promising microarchitectures for bone substitutes owing to their low weight and superior mechanical characteristics. However, existing studies on their application are incomplete because they focus solely on biomechanical or in vitro aspects. Hardly any in vivo studies where different TPMS microarchitectures are compared have been reported. Therefore, we produced hydroxyapatite-based scaffolds with three types of TPMS microarchitectures, namely Diamond, Gyroid, and Primitive, and compared them with an established Lattice microarchitecture by mechanical testing, 3D-cell culture, and in vivo implantation. Common to all four microarchitectures was the minimal constriction of a sphere of 0.8 mm in diameter, which earlier was found superior in Lattice microarchitectures. Scanning by μCT revealed the precision and reproducibility of our printing method. The mechanical analysis showed significantly higher compression strength for Gyroid and Diamond samples compared with Primitive and Lattice. After in vitro culture with human bone marrow stromal cells in control or osteogenic medium, no differences between these microarchitectures were observed. However, from the TPMS microarchitectures, Diamond- and Gyroid-based scaffolds showed the highest bone ingrowth and bone-to-implant contact in vivo . Therefore, Diamond and Gyroid designs appear to be the most promising TPMS-type microarchitectures for scaffolds produced for bone tissue engineering and regenerative medicine. Impact Statement Extensive bone defects require the application of bone grafts. To match the existing requirements, scaffolds based on triply periodic minimal surface (TPMS)-based microarchitectures could be used as bone substitutes. This work is dedicated to the investigation of mechanical and osteoconductive properties of TPMS-based scaffolds to determine the influencing factors on differences in their behavior and choose the most promising design to be used in bone tissue engineering.

Autologous bone remains the gold standard bone substitute in clinical practice. Therefore, the microarchitecture of newly developed synthetic bone substitutes, which reflects the spatial distribution of materials in the scaffold, aims to recapitulate the natural bone microarchitecture. However, the natural bone microarchitecture is optimized to obtain a mechanically stable, lightweight structure adapted to the biomechanical loading situation. In the context of synthetic bone substitutes, the application of a Triply Periodic Minimum Surface (TPMS) algorithm can yield stable lightweight microarchitectures that, despite their demanding architectural complexity, can be produced by additive manufacturing. In this study, we applied the TPMS derivative Adaptive Density Minimal Surfaces (ADMS) algorithm to produce scaffolds from hydroxyapatite (HA) using a lithography-based layer-by-layer methodology and compared them with an established highly osteoconductive lattice microarchitecture. We characterized them for compression strength, osteoconductivity, and bone regeneration. The in vivo results, based on a rabbit calvaria defect model, showed that bony ingrowth into ADMS constructs as a measure of osteoconduction depended on minimal constriction as it limited the maximum apparent pore diameter in these scaffolds to 1.53 mm. Osteoconduction decreased significantly at a diameter of 1.76 mm. The most suitable ADMS microarchitecture was as osteoconductive as a highly osteoconductive orthogonal lattice microarchitecture in noncritical- and critical-size calvarial defects. However, the compression strength and microarchitectural integrity in vivo were significantly higher for scaffolds with their microarchitecture based on the ADMS algorithm when compared with high-connectivity lattice microarchitectures. Therefore, bone substitutes with high osteoconductivity can be designed with the advantages of the ADMS-based microarchitectures. As TPMS and ADMS microarchitectures are true lightweight structures optimized for high mechanical stability with a minimal amount of material, such microarchitectures appear most suitable for bone substitutes used in clinical settings to treat bone defects in weight-bearing and non-weight-bearing sites., Competing Interests: The ADMS algorithm is patented by Spherene AG where C.W., R.B., L.F., and D.S. own stocks or stock options. Otherwise, the authors declare no conflicts of interest., (© Ekaterina Maevskaia et al., 2023; Published by Mary Ann Liebert, Inc.)

Tendon injuries can result in two major drawbacks. Adhesions to the surrounding tissue may limit the range of motion, while fibrovascular scar formation can lead to poor biomechanical outcomes. Prosthetic devices may help to mitigate those problems. Emulsion electrospinning was used to develop a novel three-layer tube based on the polymer DegraPol (DP), with incorporated insulin-like growth factor-1 (IGF-1) in the middle layer. Scanning electron microscopy was utilized to assess the fiber diameter in IGF-1 containing pure DP meshes. Further characterization was performed with Fourier Transformed Infrared Spectroscopy, Differential Scanning Calorimetry, and water contact angle, as well as through the assessment of mechanical properties and release kinetics from ELISA, and the bioactivity of IGF-1 by qPCR of collagen I , ki67, and tenomodulin in rabbit Achilles tenocytes. The IGF-1-containing tubes exhibited a sustained release of the growth factor up to 4 days and showed bioactivity by significantly upregulated ki67 and tenomodulin gene expression. Moreover, they proved to be mechanically superior to pure DP tubes (significantly higher fracture strain, failure stress, and elastic modulus). The novel three-layer tubes intended to be applied over conventionally sutured tendons after a rupture may help accelerate the healing process. The release of IGF-1 stimulates proliferation and matrix synthesis of cells at the repair site. In addition, adhesion formation to surrounding tissue can be reduced due to the physical barrier.

The early phase of bone healing is a complex and poorly understood process. With additive manufacturing, we can generate a specific and customizable library of bone substitutes to explore this phase. In this study, we produced tricalcium phosphate-based scaffolds with microarchitectures composed of filaments of 0.50 mm in diameter, named Fil050G, and 1.25 mm named Fil125G, respectively. The implants were removed after only 10 days in vivo followed by RNA sequencing (RNAseq) and histological analysis. RNAseq results revealed upregulation of adaptive immune response, regulation of cell adhesion, and cell migration-related genes in both of our two constructs. However, significant overexpression of genes linked to angiogenesis, regulation of cell differentiation, ossification, and bone development was observed solely in Fil050G scaffolds. Moreover, quantitative immunohistochemistry of structures positive for laminin revealed a significantly higher number of blood vessels in Fil050G samples. Furthermore, µCT detected a higher amount of mineralized tissue in Fil050G samples suggesting a superior osteoconductive potential. Hence, different filament diameters and distances in bone substitutes significantly influence angiogenesis and regulation of cell differentiation involved in the early phase of bone regeneration, which precedes osteoconductivity and bony bridging seen in later phases and as consequence, impacts the overall clinical outcome.

Healing large bone defects remains challenging in orthopedic surgery and is often associated with poor outcomes and complications. A major issue with bioengineered constructs is achieving a continuous interface between host bone and graft to enhance biological processes and mechanical stability. In this study, we have developed a new bioengineering strategy to produce oriented biocompatible 3D PLGA/aCaP nanocomposites with enhanced osseointegration. Decellularized scaffolds -containing only extracellular matrix- or scaffolds seeded with adipose-derived mesenchymal stromal cells were tested in a mouse model for critical size bone defects. In parallel to micro-CT analysis, SAXS tensor tomography and 2D scanning SAXS were employed to determine the 3D arrangement and nanostructure within the critical-sized bone. Both newly developed scaffold types, seeded with cells or decellularized, showed high osseointegration, higher bone quality, increased alignment of collagen fibers and optimal alignment and size of hydroxyapatite minerals., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Biomimetic nanocrystalline apatites analogous to bone mineral can be prepared using soft chemistry. Due to their high similarity to bone apatite, as opposed to stoichiometric hydroxyapatite for example, they now represent an appealing class of compounds to produce bioactive ceramics for which drug delivery and ion exchange abilities have been described extensively. However, immersion in aqueous media of dried non-carbonated biomimetic apatite crystals may generate an acidification event, which is often disregarded and not been clarified to-date. Yet, this acidification process could limit their further development if it is not understood and overcome if necessary. This may, for example, alter biological test outcomes, during their evaluation as bone repair materials, due to potentially deleterious effects of the acidic environment on cells, especially in in vitro static conditions. In this study, we explore the origins of this acidification phenomenon based on complementary experimental data and we point out the central role of the hydrated ionic layer present on apatite nanocrystals. We then propose a practical strategy to circumvent this acidification effect using an adequate post-precipitation equilibration step that was optimized. Using this enutralization protocol, we then showed the possibility of performing (micro)biological assessments on such compounds and provide an illustration with the examples of post-equilibrated Cu 2+ - and Ag + -doped nanocrystalline apatites. We demonstrate their non-cytotoxicity to osteoblast cells and their antibacterial features as tested versus five major pathogens involved in bone infections, therefore pointing to their relevance in the field of antibacterial bone substitutes. The preliminary in vivo implantation of a relevant sample in a rat's calvarial defect confirmed its biocompatibility and the absence of adverse reaction. Understanding and eliminating this technical barrier should help promoting biomimetic apatites as a genuine new class of biomaterial-producing compounds for bone regeneration applications, e.g., with antibacterial features, far from being solely considered as "laboratory curiosities".

Revolutionary fabrication technologies such as three-dimensional (3D) printing to develop dental structures are expected to replace traditional methods due to their ability to establish constructs with the required mechanical properties and detailed structures. Three-dimensional printing, as an additive manufacturing approach, has the potential to rapidly fabricate complex dental prostheses by employing a bottom-up strategy in a layer-by-layer fashion. This new technology allows dentists to extend their degree of freedom in selecting, creating, and performing the required treatments. Three-dimensional printing has been narrowly employed in the fabrication of various kinds of prostheses and implants. There is still an on-demand production procedure that offers a reasonable method with superior efficiency to engineer multifaceted dental constructs. This review article aims to cover the most recent applications of 3D printing techniques in the manufacturing of dental prosthetics. More specifically, after describing various 3D printing techniques and their advantages/disadvantages, the applications of 3D printing in dental prostheses are elaborated in various examples in the literature. Different 3D printing techniques have the capability to use different materials, including thermoplastic polymers, ceramics, and metals with distinctive suitability for dental applications, which are discussed in this article. The relevant limitations and challenges that currently limit the efficacy of 3D printing in this field are also reviewed. This review article has employed five major scientific databases, including Google Scholar, PubMed, ScienceDirect, Web of Science, and Scopus, with appropriate keywords to find the most relevant literature in the subject of dental prostheses 3D printing., Competing Interests: Conflicts of Interest: The authors declare no conflict of interest.

63Additive manufacturing can be applied to produce personalized bone substitutes. At present, the major three-dimensional (3D) printing methodology relies on filament extrusion. In bioprinting, the extruded filament consists mainly of hydrogels, in which growth factors and cells are embedded. In this study, we used a lithography-based 3D printing methodology to mimic filament-based microarchitectures by varying the filament dimension and the distance between the filaments. In the first set of scaffolds, all filaments were aligned toward bone ingrowth direction. In a second set of scaffolds, which were derived from the identical microarchitecture but tilted by 90°, only 50% of the filaments were in line with the bone ingrowth direction. Testing of all tricalcium phosphate-based constructs for osteoconduction and bone regeneration was performed in a rabbit calvarial defect model. The results revealed that if all filaments are in line with the direction of bone ingrowth, filament size and distance (0.40-1.25 mm) had no significant influence on defect bridging. However, with 50% of filaments aligned, osteoconductivity declined significantly with an increase in filament dimension and distance. Therefore, for filament-based 3D- or bio-printed bone substitutes, the distance between the filaments should be 0.40 to 0.50 mm irrespective of the direction of bone ingrowth or up to 0.83 mm if perfectly aligned to it., Competing Interests: The authors declare no conflicts of interest., (Copyright: © 2022 Guerrero et al.)

Additive manufacturing enables the realization of the macro- and microarchitecture of bone substitutes. The macroarchitecture is determined by the bone defect and its shape makes the implant patient specific. The preset distribution of the 3D-printed material in the macroarchitecture defines the microarchitecture. At the lower scale, the nanoarchitecture of 3D-printed scaffolds is dependent on the post-processing methodology such as the sintering temperature. However, the role of microarchitecture and nanoarchitecture of scaffolds for osteoconduction is still elusive. To address these aspects in more detail, we produced lithography-based osteoconductive scaffolds from hydroxyapatite (HA) of identical macro- and microarchitecture and varied their nanoarchitecture, such as microporosity, by increasing the maximum sintering temperatures from 1100 to 1400 °C. The different scaffold types were characterized for microporosity, compression strength, and nanoarchitecture. The in vivo results, based on a rabbit calvarial defect model showed that bony ingrowth, as a measure of osteoconduction, was independent from scaffold's microporosity. The same applies to in vitro osteoclastic resorbability, since on all tested scaffold types, osteoclasts formed on their surfaces and resorption pits upon exposure to mature osteoclasts were visible. Thus, for wide-open porous HA-based scaffolds, a low degree of microporosity and high mechanical strength yield optimal osteoconduction and creeping substitution. Based on our study, non-unions, the major complication during demanding bone regeneration procedures, could be prevented.

The human skeleton is a dynamic and remarkably organized organ system that provides mechanical support and performs a variety of additional functions. Bone tissue undergoes constant remodeling; an essential process to adapt architecture/resistance to growth and mechanical needs, but also to repair fractures and micro-damages. Despite bone's ability to heal spontaneously, certain situations require an additional stimulation of bone regeneration, such as non-union fractures or after tumor resection. Among the growth factors used to increase bone regeneration, bone morphogenetic protein-2 (BMP2) is certainly the best described and studied. If clinically used in high quantities, BMP2 is associated with various adverse events, including fibrosis, overshooting bone formation, induction of inflammation and swelling. In previous studies, we have shown that it was possible to reduce BMP2 doses significantly, by increasing the response and sensitivity to it with small molecules called "BMP2 enhancers". In the present study, we investigated the effect of N-Vinyl-2-pyrrolidone (NVP) on osteoblast and osteoclast differentiation in vitro and guided bone regeneration in vivo. We showed that NVP increases BMP2-induced osteoblast differentiation and decreases RANKL-induced osteoclast differentiation in a dose-dependent manner. Moreover, in a rabbit calvarial defect model, the histomorphometric analysis revealed that bony bridging and bony regenerated area achieved with NVP-loaded poly (lactic-co-glycolic acid (PLGA) membranes were significantly higher compared to unloaded membranes. Taken together, our results suggest that NVP sensitizes BMP2-dependent pathways, enhances BMP2 effect, and inhibits osteoclast differentiation. Thus, NVP could prove useful as "osteopromotive substance" in situations where a high rate of bone regeneration is required, and in the management of bone diseases associated with excessive bone resorption, like osteoporosis.

N-methyl pyrrolidone (NMP) is an FDA approved molecule used as an excipient in pharmaceutical industry. Besides having a central role in formulation of drugs, the most important function of any excipient is to guarantee the safety of the medicine during and after its administration. Several studies have shown that exposure to NMP and especially in rats produce a gonadotoxic effect leading to infertility. However, the mechanisms underlying the effect of NMP on male reproduction are unknown. The aim of this study was to assess the reproductive toxicity of NMP in male rats and to elucidate the underlying mechanism. Male Sprague Dawley rats were injected intraperitoneally, twice/ week, at a dose of 108 mg/ 100 g of body weight with NMP. Analysis of reproductive parameters revealed testicular atrophy in NMP treated animals compared to control animals. Germ cell composition within the seminiferous tubules was disturbed and manifested in an increase in number of cells with fragmented DNA. A subsequent decrease in number of spermatocytes and spermatids was observed. Alpha screen assay shows that NMP acts at the concentrations we applied in vivo as a low affinity inhibitor for BRDT (testis specific bromodomain protein). BRDT inhibition is mirrored by a significant decrease in the expression of early stage spermatocyte markers (lmna, aurkc and ccna1), during which BRDT expression predominates. A significant decrease in testosterone levels was also observed. Since NMP interferes with spermatogenesis on various levels, its use in humans must be carefully monitored., (Copyright © 2021 The Authors. Published by Elsevier Inc. All rights reserved.)

Regenerative endodontic procedures are an alternative to conventional root-canal treatment and apexification. There are two different tissue engineering approaches that are currently followed, both aiming at the colonisation of the cleaned pulp space by pluripotent cells and subsequent pulp regeneration. Firstly, the transplantation of mesenchymal stem cells (MSCs), and secondly a cell-free strategy that relies on bioactive molecules to trigger the recruitment of the patient's own cells. The first approach is hampered by costs and regulatory issues. Despite great initial enthusiasm with a clinically used cell-free approach that relies on induced bleeding into the pulp space, results have been revealed to be rather unpredictable, and mere repair rather than regeneration of the pulp-dentin complex is what is typically achieved. Moreover, the extent of further root development is variable, and the concept is limited to immature teeth. This article discusses a third possible way of regenerative endodontics that involves the application of MSC-derived exosomes. These are extracellular vesicles that contain proteins, lipids, and nucleic acids, reflecting the secretome of MSCs. Based on the first in vitro and in vivo studies, exosomes appear to be a potent tool to improve pulp regeneration. This narrative review aims to investigate the therapeutic use of human MSCs or dental pulp-derived exosomes in regenerative endodontics. Furthermore, the focus of this review is on targeting important questions that should be investigated in future in-vivo and clinical studies, such as the choice of scaffold material for exosome delivery into the pulp space.

Additive manufacturing is a key technology required to realize the production of a personalized bone substitute that exactly meets a patient's need and fills a patient-specific bone defect. Additive manufacturing can optimize the inner architecture of the scaffold for osteoconduction, allowing fast and reliable defect bridging by promoting rapid growth of new bone tissue into the scaffold. The role of scaffold microporosity/nanoarchitecture in osteoconduction remains elusive. To elucidate this relationship, we produced lithography-based osteoconductive scaffolds from tricalcium phosphate (TCP) with identical macro- and microarchitecture, but varied their nanoarchitecture/microporosity by ranging maximum sintering temperatures from 1000 °C to 1200 °C. After characterization of the different scaffolds' microporosity, compression strength, and nanoarchitecture, we performed in vivo studies that showed that ingrowth of bone as an indicator of osteoconduction significantly decreased with decreasing microporosity. Moreover, at the 1200 °C peak sinter temperature and lowest microporosity, osteoclastic degradation of the material was inhibited. Thus, even for wide-open porous TCP-based scaffolds, a high degree of microporosity appears to be essential for optimal osteoconduction and creeping substitution, which can prevent non-unions, the major complication during bone regeneration procedures.

Development of an effective male contraceptive agent remains a challenge. The present study evaluates the potential of N, N-Dimethylacetamide (DMA), a FDA approved excipient as a male contraceptive agent. Male Sprague Dawley rats injected with DMA for a period of 8 weeks (one injection per week) showed a significant alteration of reproductive parameters. Furthermore, DMA treated animals showed complete infertility in a dose dependent manner, as no pups were born despite proper mating between females and DMA treated males. However, stopping the DMA treatment for a period of 8 weeks (after the initial treatment) restored the reproductive parameters to normal. Moreover, the fertility was resumed to normal as pups were born in the groups where DMA treatment was halted after initial DMA treatment. All these changes had no effect on the level of reproductive hormones FSH, LH and testosterone. Taken together, our results indicate that DMA acts in a reversible and non-hormonal manner to achieve contraception in rats. Therefore, repurposing the use of DMA could lead in a short time to an inexpensive and safer male contraceptive option., (Copyright © 2020 Khera, Ghayor, Lindholm, Pavlova, Atanassova and Weber.)

From the beginning of 2020, the governments and the health systems around the world are tackling infections and fatalities caused by the novel severe acute respiratory syndrome coronavirus (SARS-CoV-2) resulting in the coronavirus disease 2019 (COVID-19). This virus pandemic has turned more complicated as individuals with co-morbidities like diabetes, cardiovascular conditions and obesity are at a high risk of acquiring infection and suffering from a more severe course of disease. Prolonged viral infection and obesity are independently known to lower the immune response and a combination can thus result in a "cytokine storm" and a substantial weakening of the immune system. With the rise in obesity cases globally, the chances that obese individuals will acquire infection and need hospitalization are heightened. In this review, we discuss why obesity, a low-grade chronic inflammation, contributes toward the increased severity in COVID-19 patients. We suggest that increased inflammation, activation of renin-angiotensin-aldosterone system, elevated adipokines and higher ectopic fat may be the factors contributing to the disease severity, in particular deteriorating the cardiovascular and lung function, in obese individuals. We look at the many lessons learnt from the 2009 H1N1 influenza A pandemic and relate it to the very little but fast incoming information that is available from the SARS-CoV-2 infected individuals with overweight and obesity., (Copyright © 2020 Bhattacharya, Ghayor, Pérez Dominguez and Weber.)

N, N-Dimethylacetamide is an FDA approved solvent widely used in pharmaceutical industry to facilitate the solubility of lipophilic, high molecular weight drugs with poor water solubility. However, the cytotoxic effects of DMA raises the concern about its use in clinical applications. In the present study, we address the effect of DMA on spermatogenesis. Male Sprague Dawley rats were injected intra-peritoneally for 8 weeks, once a week at a dose of 862 mg/kg. Analysis of reproductive parameters revealed that DMA treated animals exhibit spermatid formation defects within the testis describing the characteristics of oligozoospermia. A subsequent decrease in epididymal sperm concentration along with distortion of sperm morphology was observed. The mitochondrial and microtubule organization in the sperm is considerably modified by DMA. This disrupts the sperm kinetics thus decreasing the total and progressive sperm motility. Finally, DMA treatment resulted in loss of fertility. Our results indicate that exposure to DMA has a negative impact on spermatogenesis and leads to infertility in male rats by inhibiting the post meiotic stages of sperm development. Therefore, the use of DMA in humans must be closely monitored., Competing Interests: Declaration of competing interest The authors declare no conflict of interests., (Copyright © 2020 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Introduction: Transforming growth factor beta 1 (TGF-β1) is a key morphogen in regenerative endodontics; yet, its location within the hard tissue phase of dentin and its availability in mature roots have not been fully elucidated., Methods: Young mature (n = 8) and immature (n = 11) roots from sound premolars were obtained from 13 orthodontic patients aged 17 ± 1 and 12 ± 1 years, respectively. Roots were cleaned of organic remnants in 5% sodium hypochlorite. The width of the minor foramen was measured using a digital microscope. TGF-β1 distribution was assessed in 3 roots per group by immunostaining combined with confocal laser scanning microscopy. The root dentin of the remaining 13 roots was powdered and decalcified in 17% EDTA to determine the overall levels of hard tissue-embedded TGF-β1 by enzyme-linked immunosorbent assay. Data were compared between groups using the Student t test (α = .05)., Results: The minor foramen was 168 ± 49 μm versus 557 ± 295 μm in mature compared with immature roots (P < .05). TGF-β1 was highly stainable toward the pulp space in both groups. It was clearly associated with peritubular dentin and apparently absent in nontubular outer dentin. TGF-β1 content was 115 ± 31 pg and 74 ± 35 pg/100 mg mature versus immature root dentin, respectively (P > .05)., Conclusions: TGF-β1 is deposited into the peritubular dentin. It should be possible to release this molecule in regenerative endodontic procedures from young mature roots as well as immature roots., (Copyright © 2020 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Regenerative endodontics has been described as a paradigm shift in dentistry, despite its current limitation to immature teeth and reparative rather than regenerative outcomes. Cell-free treatments are favored because of regulatory issues. However, the recruitment of host-derived stem cells to the desired site remains challenging. We investigated whether dental pulp-derived exosomes, which are extracellular vesicles that contain proteins, lipids, RNA, and DNA and thus mirror their parental cells, may be used for this purpose. The use of exosomes may present appreciable advantages over the direct use of transplanted stem cells due to a higher safety profile, easier isolation, preservation, and handling. Here we harvested exosomes from a cultured third-molar pulp cell and assessed them by transmission electron microscopy and Western blotting. Human mesenchymal stem cells (MSCs) were exposed to these exosomes to assess exosome uptake, cell migration, and proliferation. In addition, a fibrin gel (i.e., a diluted fibrin sealant), was assessed as a delivery system for the exosomes. Our results show that exosomes attracted MSCs, and the fibrin gel enhanced their effect. Moreover, exosomes improved the proliferation of MSCs. Therefore, we propose that pulp-derived exosomes in combination with a fibrin gel could be a powerful combination for clinical translation towards improved cell-free regenerative endodontics and thus represent a new way to fill dental hard tissues., Competing Interests: The authors declare no conflicts of interest.

The treatment of bone defects with recombinant bone morphogenetic protein-2 (BMP-2) requires high doses precluding broad clinical application. Here, a bioengineering approach is presented that strongly improves low-dose BMP-2-based bone regeneration by mobilizing healing-associated mesenchymal progenitor cells (MPCs). Smart synthetic hydrogels are used to trap and study endogenous MPCs trafficking to bone defects. Hydrogel-trapped and prospectively isolated MPCs differentiate into multiple lineages in vitro and form bone in vivo. In vitro screenings reveal that platelet-derived growth factor BB (PDGF-BB) strongly recruits prospective MPCs making it a promising candidate for the engineering of hydrogels that enrich endogenous MPCs in vivo. However, PDGF-BB inhibits BMP-2-mediated osteogenesis both in vitro and in vivo. In contrast, smart two-way dynamic release hydrogels with fast-release of PDGF-BB and sustained delivery of BMP-2 beneficially promote the healing of bone defects. Collectively, it is shown that modulating the dynamics of endogenous progenitor cells in vivo by smart synthetic hydrogels significantly improves bone healing and holds great potential for other advanced applications in regenerative medicine., Competing Interests: The authors declare no conflict of interest., (© 2020 The Authors. Published by WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim.)

N,N -Dimethylacetamide (DMA) is FDA approved as an excipient and is used as drug-delivery vehicle. Due to its amphipathic nature and diverse bioactivities, it appears to be a good combination of biodegradable poly-lactide-co-glycolide (PLGA)-based guided bone regeneration membranes. Here we show that the solvent DMA can be loaded to PLGA membranes by different regimes, leading to distinct release profiles, and enhancing the bone regeneration in vivo. Our results highlight the potential therapeutic benefits of DMA in guided bone regeneration procedures, in combination with biodegradable PLGA membranes., Competing Interests: The authors declare no conflict of interest. C.G. and F.E.W. are listed as inventors of the patent hold by the University mentioned above.

Increased body weight caused by visceral fat accumulation is on the rise and is reaching epidemic proportions worldwide. Hence, means and ways to tackle the problem of increased adiposity is of utmost importance. In this work, we report the effect of a water-soluble small molecule N,N-Dimethlyacetamide (DMA) on weight gain and adiposity in vitro and in vivo . To monitor the in vitro effect of DMA on adipogenesis, 3T3-L1 preadipocytes and pluripotent C2C12 cells were differentiated to adipocytes in the presence of DMA (5 mM and 10 mM). Oil red O staining and reverse transcriptase polymerase chain reaction (RT-PCR) were performed to evaluate the differentiation to adipocytes. To study the in vivo effect of DMA on body weight, experiments were done with C57BL/6J male mice (6 weeks old). The mice were randomly assigned to receive either high-fat diet (HFD; 45% fat) or a normal diet (7% fat) and were either intraperitoneally injected with DMA or phosphate-buffered saline (PBS) once a week for 20 weeks. Glucose tolerance test was performed on living mice. Post-experiment, the epididymal and subcutaneous adipose tissue were excised from the sacrificed animal, and histology, RT-PCR and plasma triglyceride assay were performed. DMA had no inhibitory effect on adipocyte differentiation when applied only once. However, sustained treatment with DMA inhibited the adipocyte differentiation in both 3T3-L1 and C2C12 cells, and significantly lowered the expression of adipocyte markers, in particular, fatty acid-binding protein 4 (fabp4). Under HFD, C57BL/6J mice treated with DMA had lower body weight compared with PBS treatment. Moreover, the HFD-induced higher body weight was controlled when the mice were switched from PBS to DMA treatment. Further, the HFD-mediated adipocyte hypertrophy from epididymal and subcutaneous adipose tissue was significantly reduced with DMA treatment. Interestingly, the glucose clearance and triglyceride levels in the plasma were improved in mice when DMA treatment was initiated early. Taken together, our results show that DMA exhibits a clear potential to prevent weight gain and restricts adiposity in response to high-fat feeding., (Copyright © 2019 Bhattacharya, Ghayor, Pérez Dominguez and Weber.)

Bone regeneration procedures in clinics and bone tissue engineering stand on three pillars: osteoconduction, osteoinduction, and stem cells. In the last two decades, the focus in this field has been on osteoinduction, which is realized by the use of bone morphogenetic proteins and the application of mesenchymal stem cells to treat bone defects. However, osteoconduction was reduced to a surface phenomenon because the supposedly ideal pore size of osteoconductive scaffolds was identified in the 1990s as 0.3-0.5 mm in diameter, forcing bone formation to occur predominantly on the surface. Meanwhile, additive manufacturing has evolved as a new tool to realize designed microarchitectures in bone substitutes, thereby enabling us to study osteoconduction as a true three-dimensional phenomenon. Moreover, by additive manufacturing, wide-open porous scaffolds can be produced in which bone formation occurs distant to the surface at a superior bony defect-bridging rate enabled by highly osteoconductive pores 1.2 mm in diameter. This review provides a historical overview and an updated definition of osteoconduction and related terms. In addition, it shows how additive manufacturing can be instrumental in studying and optimizing osteoconduction of bone substitutes, and provides novel optimized features and boundaries of osteoconductive microarchitectures. Impact Statement This review updates the definition of osteoconduction and draws clear lines to discriminate between osteoconduction, osseointegration, and osteoinduction. Moreover, additively manufactured libraries of scaffolds revealed that: osteoconduction is more a three-dimensional than a surface phenomenon; microarchitecture dictates defect bridging, which is the measure for osteoconduction; pore diameter or the diagonal of lattice microarchitectures of osteoconductive bone substitutes should be ∼1.2 mm.

Impaired bone regeneration by excess inflammation leads to failure of bone healing. Current therapies display limited benefits making new treatments imperative. Our recent discoveries of the anti-inflammatory characteristics of bromodomain and extra terminal domain (BET) inhibitors, N-methylpyrrolidone (NMP) and N,N-Dimethylacetamide (DMA), implicate possible therapeutic use of epigenetic drugs in inflammation-impaired bone healing. Here, we investigated the effects of NMP and DMA on osteogenesis in vitro and ex vivo under the influence of TNFα, a key cytokine responsible for impaired fracture healing. NMP and DMA pre-treatment recovered TNFα-inhibited expression of essential osteoblastic genes, Alp, Runx2, and Osterix as well as mineralization in multipotent stem cells, but not in pre-osteoblasts and calvarial osteoblasts. The mechanism of action involves the recovery of TNFα-suppressed BMP-induced Smad signaling and the reduction of TNFα-triggered ERK pathway. In addition, ERK inhibitor treatment diminished the effect of TNFα on osteogenesis, which reinforces the role of ERK pathway in the adverse effect of TNFα. Furthermore, endochondral ossification was analyzed in an ex vivo bone culture model. TNFα largely abrogated BMP-promoted growth of mineralized bone while pre-treatment of NMP and DMA prevented the deleterious effect of TNFα. Taken together, these data shed light on developing low- affinity epigenetic drugs as new therapies for inflammation-compromised bone healing., (Copyright © 2019 The Authors. Published by Elsevier Inc. All rights reserved.)

Standardized and reproducible animal models are required for the assessment of bone healing mediated by biomaterials, cells, and drugs. Among the available bone-fractured models, calvarial defect is a simple and adequate option when researchers investigate intra-membranous bone formation and the influence of their regenerative solutions. However, the conventional surgical tools required to perform calvaria osteotomies (i.e., trephine bur mounted on a dental handpiece, DS) can affect the subjacent tissues of the skull, which are the dura mater and the brain. We hypothesized that the quality of the calvaria defect and the preservation of underlying tissues can be improved using a novel Anspach high-speed drill with a Codman Neuro Disposable Perforator handheld (ACP). Using a rabbit cadaveric models, we performed calvarial defects with either conventional DS or the ACP system, and showed that both techniques allowed to create standardized defects with circular geometry. We demonstrated that the ACP had clear benefices in terms of DM preservation and absence of exothermic reaction upon drilling. Even though this comparative work was conducted on cadaver, it is of substantial importance as it introduces a novel technique, easily applicable to investigate calvaria bone healing, which brings clear advantages compared to the conventional dental station. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 9999:1-9, 2019., (© 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.)

Introduction: In carious teeth, transforming growth factor beta 1 (TGF-β1) is released from the dentin matrix and possibly activated in an acidic environment. Conversely, EDTA solutions with a neutral to slightly alkaline pH are used in clinics to promote cell homing in regenerative endodontic procedures. We hypothesized that citric acid (CA) might be more beneficial., Methods: TGF-β1 release from human dentin disks conditioned with either 10% CA (pH = 2) or 17% EDTA (pH = 8) and the behavior of human stem cells toward such pretreated dentin were studied. The protein concentration in conditioning solutions after 10 minutes of dentin exposure was determined using a pH-independent slot blot technique., Results: There was a 5-fold higher concentration of the target protein in CA (382 ± 30 ng/disk) compared with EDTA (66 ± 3 ng/disk, P < .005). Using confocal laser scanning microscopy on immunofluorescent-labeled disks, we identified a high density of TGF-β1 in peritubular dentin after CA treatment. A migration assay showed that CA conditioning attracted significantly more stem cells toward the dentin after 24 hours compared with EDTA (P < .05) or phosphate-buffered saline (P < .005). To investigate whether the cell response to these dentin surfaces could be affected by different pretreatments, we cultured stem cells on conditioned dentin disks and found that CA had a significantly (P < .05) better effect than EDTA on cell attachment and cell survival., Conclusions: CA conditioning could be useful and may have significant benefits over current treatments., (Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.)

(1) Background: In an adult skeleton, bone is constantly renewed in a cycle of bone resorption, followed by bone formation. This coupling process, called bone remodeling, adjusts the quality and quantity of bone to the local needs. It is generally accepted that osteoporosis develops when bone resorption surpasses bone formation. Osteoclasts and osteoblasts, bone resorbing and bone forming cells respectively, are the major target in osteoporosis treatment. Inside bone and forming a complex network, the third and most abundant cells, the osteocytes, have long remained a mystery. Osteocytes are responsible for mechano-sensation and -transduction. Increased expression of the osteocyte-derived bone inhibitor sclerostin has been linked to estrogen deficiency-induced osteoporosis and is therefore a promising target for osteoporosis management. (2) Methods: Recently we showed in vitro and in vivo that NMP ( N -Methyl-2-pyrrolidone) is a bioactive drug enhancing the BMP-2 (Bone Morphogenetic Protein 2) induced effect on bone formation while blocking bone resorption. Here we tested the effect of NMP on the expression of osteocyte-derived sclerostin. (3) Results: We found that NMP significantly decreased sclerostin mRNA and protein levels. In an animal model of osteoporosis, NMP prevented the estrogen deficiency-induced increased expression of sclerostin. (4) Conclusions: These results support the potential of NMP as a novel therapeutic compound for osteoporosis management, since it preserves bone by a direct interference with osteoblasts and osteoclasts and an indirect one via a decrease in sclerostin expression by osteocytes.

Additive manufacturing of bone tissue engineering scaffolds will become a key element for personalized bone tissue engineering in the near future. Several additive manufacturing processes are based on extrusion where the deposition of the filament will result in a three-dimensional lattice structure. Recently, we studied diverse lattice structures for bone tissue engineering realized by laser sintering of titanium. In this work, we used lithography-based ceramic manufacturing of lattice structures to produce scaffolds from tricalcium phosphates (TCP) and compared them in vivo to congruent titanium scaffolds manufactured with the identical computer-aided design data to look for material-based differences in bony healing. The results show that, during a 4-week period in a noncritical-size defect in a rabbit calvarium, both scaffolds with the identical microarchitecture performed equally well in terms of bony regeneration and bony bridging of the defect. A significant increase in both parameters could only be achieved when the TCP-based scaffolds were doped with bone morphogenetic protein-2. In a critical-size defect in the calvarial bone of rabbits, however, the titanium scaffold performed significantly better than the TCP-based scaffold, most likely due to its higher mechanical stability. We conclude that titanium and TCP-based scaffolds of the same microarchitecture perform equally well in terms of bone regeneration, provided the microarchitecture meets the mechanical demand at the site of implantation.

In the last three decades, all efforts in bone tissue engineering were driven by the dogma that the ideal pore size in bone substitutes lies between 0.3 and 0.5 mm in diameter. Newly developed additive manufacturing methodologies for ceramics facilitate the total control over pore size, pore distribution, bottleneck size, and bottleneck distribution. Therefore, this appears to be the method of choice with which to test the aforementioned characteristics of an ideal bone substitute. To this end, we produced a library of 15 scaffolds with diverse defined pore/bottleneck dimensions and distributions, tested them in vivo in a calvarial bone defect model in rabbits, and assessed the clinically most relevant parameters: defect bridging and bony regenerated area. Our in vivo data revealed that the ideal pore/bottleneck dimension for bone substitutes is in the range of 0.7-1.2 mm, and appears therefore to be twofold to fourfold more extended than previously thought. Pore/bottleneck dimensions of 1.5 and 1.7 mm perform significantly worse and appear unsuitable in bone substitutes. Thus, our results set the ideal range of pore/bottleneck dimensions and are likely to have a significant impact on the microarchitectural design of future bone substitutes for use in orthopedic, trauma, cranio-maxillofacial and oral surgery.

Histomorphometry and microCT are the two dominant imaging techniques to study bone structure and quality to evaluate repair, regeneration, and disease. These two methods are complementary; where histology provides highly resolved tissue properties on a cellular level in 2D, microCT provides spatial information of bone micro-structure in 3D. For this reason, both of these modalities are commonly used in bone studies. As it is not trivial to combine the images of these two modalities, the two methods are typically applied to different specimens within a study. However, we believe that applying both imaging modalities to the same specimen with a suitable fusion strategy may further strengthen the value of each modality. Therefore, we propose a registration method to align 2D histology slices with a 3D microCT volume, without any prior knowledge of the sectioning direction. In a preprocessing step, bone is extracted from both images. Then, we use a strategy for initializing potential locations, and an iterative approach for searching for an ideal fitting plane using Radon-based rigid transforms and feature-based affine alignments. The algorithm was tested and validated with simulated and real data. For the latter, microCT images of trabecular bone with 76 corresponding histological sections acquired from decalcified and calcified specimens were used. The registration resulted in 94.7% acceptable solutions as defined by a registration orientation error of less than 3°. Average registration accuracy of the acceptable results was 0.6°, leading to a target registration error for our method of 106.3μm, computed based on landmarks annotated by an observer. This corresponds roughly to 10pixels in the images; although, the relation to actual visible structures that provide the features to register, is arguably more relevant., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Objectives: To test whether or not chemical and/or physical modifications of polyethylene glycol (PEG) hydrogels influence degradation time, matrix/membrane stability, and integration into surrounding hard and soft tissues., Material and Methods: In 28 rabbits, six treatment modalities were randomly applied to six sites on the rabbit skull: a dense network PEG hydrogel (PEG HD), a medium-dense network PEG hydrogel (PEG MD), a medium-dense network PEG hydrogel modified with an RGD sequence (PEG MD/RGD), a medium-dense network PEG hydrogel modified with RGD with reduced carboxymethyl cellulose (PEG MD/RGD&#95;LV), a loose network PEG hydrogel modified with RGD (PEG LD/RGD), and a collagen membrane (BG). Descriptive histology and histomorphometry were performed at 1, 2, 4, and 6 weeks., Results: PEG HD revealed the highest percentage of residual matrix at all time points starting with 47.2% (95% CI: 32.8-63.8%) at 1 week and ending with 23.4% (95% CI: 10.3-49.8%) at 6 weeks. The hydrogel with the loosest network (PEG LD/RGD) was stable the first 2 weeks and then degraded continuously with a final area of 8.3% (95% CI: 3.2-21.2%). PEG HD was the most stable and densely stained membrane, whereas PEG MD and PEG LD matrices integrated faster, but started to degrade to a higher degree between 2 and 4 weeks. PEG MD degradation was dependent on the addition of RGD and the amount of CMC., Conclusions: Chemical and/or physical modifications of PEG hydrogels influenced matrix stability. PEG MD/RGD demonstrated an optimal balance between degradation time and integration into the surrounding soft and hard tissues., (© 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

The role of mammalian high temperature requirement protease A1 (HTRA1) in somatic stem cell differentiation and mineralized matrix formation remains controversial, having been demonstrated to impart either anti- or pro-osteogenic effects, depending on the in vitro cell model used. The aim of this study was therefore to further evaluate the role of HTRA1 in regulating the differentiation potential and lineage commitment of murine mesenchymal stem cells in vitro, and to assess its influence on bone structure and regeneration in vivo. Our results demonstrated that short hairpin RNA-mediated ablation of Htra1 in the murine mesenchymal cell line C3H10T1/2 increased the expression of several osteogenic gene markers, and significantly enhanced matrix mineralization in response to BMP-2 stimulation. These effects were concomitant with decreases in the expression of chondrogenic gene markers, and increases in adipogenic gene expression and lipid accrual. Despite the profound effects of loss-of-function of HTRA1 on this in vitro osteochondral model, these were not reproduced in vivo, where bone microarchitecture and regeneration in 16-week-old Htra1-knockout mice remained unaltered as compared to wild-type controls. By comparison, analysis of femurs from 52-week-old mice revealed that bone structure was better preserved in Htra1-knockout mice than age-matched wild-type controls. These findings therefore provide additional insights into the role played by HTRA1 in regulating mesenchymal stem cell differentiation, and offer opportunities for improving our understanding of how this multifunctional protease may act to influence bone quality.

This study investigated the effect of cerium chloride (CeCl₃) on cell migration and gene expression of human foreskin fibroblasts (HFF). HFF were exposed to three different CeCl₃ solutions (1%, 5% and 10%, w / v %) for three different time durations (1, 5 and 10 min). 72 h after exposure to CeCl₃, cell viability was assessed by MTT test. A scratch-wounded assay determined the cell migration and the width of the wound, measured at 24 h. Gene expression patterns for cyclins B1 , D1 and E1 were analyzed by RT-PCR ( p < 0.05, t -test). The viability proliferation increased at 1- and 5-min exposures for all CeCl₃ concentrations, in contrast to no treatment ( p < 0.05 at 24 h). No influence of CeCl₃ was found after 10 min. The scratch assay showed increased cell migration up to 60% at 1 and 5 min after 24 h at 5% and 10%. Cyclin B1 , D1 and E1 all showed upregulation, confirming an increase in cell proliferation. This study demonstrates that exposure time and concentration of CeCl₃ may have a positive effect on fibroblast viability and migration. Application of CeCl₃ may be beneficial as a cell-stimulating agent leading to therapeutic tissue fibrosis or more resistant tissue around teeth, when warranted, during different periodontal therapies., Competing Interests: All authors declare that there is no conflict of interests concerning the materials used in this study.

The application of biomaterials used in regenerative endodontics should be traceable. In this study, we checked some basic effects of rendering a fibrin hydrogel radiopaque using an iodine-based contrast agent (iodixanol) approved for systemic application. Fibrin hydrogels were prepared from a fibrin sealant (Tisseel) using either an isotonic iodixanol solution (Visipaque 320, test) or Tris buffer (control) as a diluent. Gelation kinetics, radiopacity, and swelling of lyophilized hydrogels were tested using standard methods. Hydrogel structure was evaluated using scanning electron microscopy (SEM). Furthermore, iodixanol release from the test gels was assessed using spectrophotometry, and tissue compatibility was compared between test and control hydrogels using the chick chorioallantoic membrane (CAM) assay. Results were compared using pairwise t -test, p < 0.05. Iodixanol caused a 70-fold delay in gelation to 26 min in the test compared to the control hydrogels (22 ± 1 s). Radiopacity of the test gels was 1.9 ± 0.2 mm Al/mm, compared to zero in the control hydrogels. Lyophilized hydrogel swelling was strongly reduced when iodixanol was added to the hydrogel ( p < 0.05). Test hydrogels had an altered SEM appearance compared to controls, and exhibited a reduced porosity. Iodixanol release from the test hydrogels reached 14.5 ± 0.5% after 120 h and then ceased. This release did not have any apparent toxic effect and neither affected the viability, nor the physiology or vascularization of the CAM of fertilized chicken eggs. Iodixanol can render a fibrin hydrogel radiopaque and maintains its tissue compatibility, yet impacts gelation kinetics and hydrogel porosity.

Aim: To analyse the effect of systemic application of N-methyl pyrrolidone (NMP) on the pulp-dentine complex and on the jawbone of ovariectomized rats., Method: Female Sprague Dawley rats were randomly divided into a Sham-operated group (Sham n = 6) and an oestrogen depletion by ovariectomy (OVX n = 12) group. In 6 of the ovariectomized animals, N-methyl pyrrolidone (NMP) in phosphate-buffered saline (PBS) was administered systemically weekly by intraperitoneal injection (i.p.); the other 6 were injected with PBS (Veh). After 15 weeks of injections, the jaw bones were collected and pulps extracted from the incisors teeth. Histology was used to determine pre-dentine thickness in teeth and radiography to determine alveolar bone mass. Immunohistological staining and RT-PCR were performed to verify the presence and localization of the odontoblast-specific dentine sialoprotein and to quantify its expression in the dentine-pulp complex. Mandibular cortical width and mandibular height were evaluated by means of X-ray analysis. Statistical analysis was performed with analysis of variance (anova)., Results: Both pre-dentine (P = 0.029) and alveolar bone structures (P = 0.049) were significantly reduced due to oestrogen deficiency in OVX Veh and OVX. NMP treatment normalized these parameters to the Sham level. DSPP expression in OVX NMP animals was significantly higher (P = 0.046) than in OVX Veh. X-ray analysis confirmed that ovariectomy significantly reduced the mandibular cortical width in the OVX Veh group compared to the Sham Veh and OVX NMP (P = 0.020)., Conclusion: N-methyl pyrrolidone (NMP) had a remarkable anti-osteoporotic ability preserving activity in the pulp-dentine complex and preventing jawbone loss. These effects make NMP a promising candidate for the preservation of the activity of the pulp-dentine complex and jawbone thickness in post-menopausal females., (© 2016 International Endodontic Journal. Published by John Wiley & Sons Ltd.)

N,N-Dimethylacetamide (DMA) is a water-miscible solvent, FDA approved as excipient and therefore widely used as drug-delivery vehicle. As such, DMA should be devoid of any bioactivity. Here we report that DMA is epigenetically active since it binds bromodomains and inhibits osteoclastogenesis and inflammation. Moreover, DMA enhances bone regeneration in vivo. Therefore, our in vivo and in vitro data reveal DMA's potential as an anti-osteoporotic agent via the inhibition of osteoclast mediated bone resorption and enhanced bone regeneration. Our results highlight the potential therapeutic benefits of DMA and the need for reconsideration of previous reports where DMA was used as an 'inactive' drug-delivery vehicle., Competing Interests: The University holds a patent on DMA in conjunction with osteoporosis. The authors, other than CG and FEW have no competing interests that might be perceived to influence the results and/or discussion reported in this article.

Conventional root canal treatment in immature permanent teeth can lead to early tooth loss in children because root formation is discontinued. We investigated whether the stem cell factor (SCF) could facilitate cell homing in the pulpless immature root canal and promote regeneration of a functional pulp. In vitro, human mesenchymal stem cells (hMSCs) were exposed to SCF at various concentrations for assessing cell migration, proliferation, and differentiation toward odonto/osteoblasts by 3D-chemotaxis slides, WST-1 assay, and alkaline phosphatase activity, respectively. Fibrin gels were used to deliver 15 μg/mL SCF for in vivo experiments. The release kinetic of SCF was assessed in vitro. Two corresponding human immature premolars, with or without SCF, were placed at rat calvariae for 6 and 12 weeks. All tooth specimens were either analyzed histologically and the percentage of tissue ingrowth determined or the cells were extracted from the pulp space, and the mRNA level of DMP1, DSPP, Col1, NGF, and VEGF were assessed by quantitative polymerase chain reaction. In the presence of SCF, we saw an increase in hMSCs directional migration, proliferation, and odonto/osteogenic differentiation. SCF also increased the extent of tissue ingrowth at 6 weeks but not at 12 weeks. However, at this time point, the formed tissue appeared more mature in samples with SCF. In terms of gene transcription, DMP1, Col1, and VEGF were the significantly upregulated genes, while DSPP and NGF were not affected. Our results suggest that SCF can accelerate cell homing and the maturation of the pulp-dentin complex in human immature teeth.

Guided bone regeneration (GBR) has been utilized for several decades for the healing of cranio-maxillofacial bone defects and, particularly in the dental field, by creating space with a barrier membrane to exclude soft tissue and encourage bone growth in the membrane-protected volume. Although the first membranes were non-resorbable, a new generation of GBR membranes aims to biodegrade and provide bioactivity for better overall results. The Inion GTR™ poly(lactide-co-glycolide) (PLGA) membrane is not only resorbable but also bioactive, since it includes N-methylpyrrolidone (NMP), which has been shown to promote bone regeneration. In this study, the effects of loading different amounts of NMP onto the membrane through chemical vapour deposition or dipping have been explored. In vitro release demonstrated that lower levels of NMP led to lower NMP concentrations and slower release, based on total NMP loaded in the membrane. The dipped membrane released almost all of the NMP within 15 min, leading to a high NMP concentration. For the in vivo studies in rabbits, 6 mm calvarial defects were created and left untreated or covered with an ePTFE membrane or PLGA membranes dipped in, or preloaded with, NMP. Evaluation of the bony regeneration revealed that the barrier membranes improved bony healing and that a decrease in NMP content improved the performance. Overall, we have demonstrated the potential of these PLGA membranes with a more favourable NMP release profile and the significance of exploring the effect of NMP on these PLGA membranes with regard to bone ingrowth. Copyright © 2014 John Wiley & Sons, Ltd., (Copyright © 2014 John Wiley & Sons, Ltd.)

Intervertebral disc (IVD) degeneration is the leading trigger of low back pain, which causes disability and leads to enormous healthcare toll worldwide. Biological treatment with growth factors has evolved as potential therapy for IVD regeneration. Bone morphogenetic protein 2 (BMP-2) and BMP-7 have shown promise in this regard. In the current study, we evaluated the effect of BMP-2/7 heterodimer for disc regeneration both in vitro and in organ culture. Nucleus pulposus (NP) cells isolated from bovine caudal disc were cultured in a fibrin-hyaluronan (FBG-HA) hydrogel for up to 14 days. BMP-2/7 heterodimer covalently incorporated within the hydrogel up-regulated the aggrecan and type II collagen gene expression, and glycosaminoglycan synthesis of NP cells. The activity of the BMP-2/7 heterodimer was dose dependent. The higher dose of BMP-2/7 was further assessed in an IVD whole organ system. After 14 days of culture with cyclic dynamic load, the BMP-2/7 heterodimer delivered into the nucleotomized region showed potential to stimulate the gene expression and synthesis of proteoglycan in the remaining NP tissue after partial nucleotomy. The gene expression level of type I collagen and alkaline phosphatase in the native disc tissue were not affected by BMP-2/7 treatment, indicating no adverse fibroblastic or osteogenic effect on the disc tissue. Intradiscal delivery of BMP-2/7 heterodimer may be a promising therapeutic approach for NP regeneration. The current IVD whole organ partial nucleotomy model may be utilized for screening of other biomaterials or drugs to treat early degenerative disc disorders. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:51-60, 2017., (© 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.)