Search

Effective mosquito population suppression has been repeatedly demonstrated in field trials through the release of male mosquitoes to induce sterile mating with wild females using the incompatible insect technique (IIT), the sterile insect technique (SIT), or their combination. However, upscaling these techniques requires a highly efficient and scalable approach for the sex separation of mass-reared mosquitoes to minimize the unintentional release of females, which can lead to either population replacement or biting nuisance, a major bottleneck up to now. Here, we report the successful development of an automated mosquito pupa sex sorter that can effectively separate large numbers of males from females for population suppression of Aedes aegypti, A. albopictus, and Culex quinquefasciatus. The male production capacity of the automated sex sorter was increased by ~17-fold compared with manual sex separation with the Fay-Morlan sorter and enabled one person to separate 16 million males per week. With ~0.5% female contamination, the produced males exhibited high flight ability and mating performance. The field trial demonstrates that the quality of A. albopictus males produced using the automated sex sorter is suitable for inducing population suppression. These results indicate that the automated sex sorter offers the potential to upscale IIT and SIT against mosquito vectors for disease control. Editor's summary: Several techniques have been developed to fight mosquito-borne diseases, including the release of sterile or incompatible male mosquitoes into the wild to reduce population growth. However, sorting mosquitoes by sex is a laborious process. Gong et al. have now developed an automated mosquito pupa sex sorter, which was tested on three mosquito species and shown to increase the production of males 17-fold when compared with a manual separation process. A field trial in Guangzhou, China showed that the process was capable of producing sufficient incompatible males without reducing their quality, which led to the suppression of wild populations of mosquitoes. —Amos Matsiko [ABSTRACT FROM AUTHOR]

Balancing process efficiency and adult sterile male biological quality is one of the challenges in the success of the sterile insect technique (SIT) against insect pest populations. For the SIT against mosquitoes, many stress factors need to be taken into consideration when producing sterile males that require high biological quality to remain competitive once released in the field. Pressures of mass rearing, sex sorting, irradiation treatments, packing, transport and release including handling procedures for each step, add to the overall stress budget of the sterile male post-release. Optimizing the irradiation step to achieve maximum sterility while keeping off-target somatic damage to a minimum can significantly improve male mating competitiveness. It is therefore worth examining various protocols that have been found to be effective in other insect species, such as dose fractionation. A fully sterilizing dose of 70 Gy was administered to Aedes aegypti males as one acute dose or fractionated into either two equal doses of 35 Gy, or one low dose of 10 Gy followed by a second dose of 60 Gy. The two doses were separated by either 1- or 2-day intervals. Longevity, flight ability, and mating competitiveness tests were performed to identify beneficial effects of the various treatments. Positive effects of fractionating dose were seen in terms of male longevity and mating competitiveness. Although applying split doses generally improved male quality parameters, the benefits may not outweigh the added labor in SIT programmes for the management of mosquito vectors.

Gasoline compression ignition (GCI) is a promising strategy to achieve high thermal efficiency and low emissions with limited modifications to the conventional diesel engine hardware. It is a partially premixed concept, which derives its superiority from higher volatility and longer ignition delay of gasoline-like fuels combined with higher compression ratio typical of diesel engines. The present study investigates the combustion process in a GCI engine operating with different injection strategies using computational fluid dynamics (CFD). Simulations are carried out on a single cylinder of a multi cylinder heavy-duty compression ignition engine, which operates at a compression ratio of 17:1 and an engine speed of 1038 rev/min. Two different injection strategies viz., late injection (LI), and early pilot injection (EP) are investigated to understand their impact on combustion and performance of the engine. Renormalized group (RNG) k-ε model is used to describe in-cylinder turbulence and KH RT model is used to simulate the fuel spray breakup. The developed CFD methodology is validated against relevant experimental data under a wide range of operating conditions for each injection strategy. The developed CFD methodology was found to capture the engine combustion behavior quite well. Based on the validated CFD model, the differences in the progress of combustion event for the two injection strategies is highlighted. It was found that a larger pilot fuel mass fraction results in a steeper rise in the initial heat release rate which in turn influences the transition to mixing controlled combustion. In line with the experimental data, the study showed that the late pilot injection strategy with three injection pulses, results in higher performance compared to the other conditions. [ABSTRACT FROM AUTHOR]

The production of a large number of mosquitoes of high biological qualities and reliable sex sorting before release are key challenges when applying the sterile insect technique as part of an area-wide integrated pest management approach. There is a need to fully evaluate the production capacity of the equipment developed in order to plan and maintain a daily production level for large-scale operational release activities. This study aimed to evaluate the potential use of the FAO/IAEA larval rearing unit for Aedes aegypti and the subsequent female contamination rate after sex sorting with a Fay–Morlan glass separator. Trays from each rack were tilted and their contents sorted either for each individual tray or after mixing the content of all trays from the rack. The pupal production and the female contamination rate were estimated with respect to day of collection, position of the tray, type of pupae collection, and sorting operator. Results showed significant daily variability of pupal production and female contamination rate, with a high male pupal production level achieved on the second day of collection and estimated female contamination of male pupae reached around 1%. Neither tray position nor type of pupae collection affected the pupal production and female contamination rate. However, the operator had a significant effect on the female contamination rate. These results highlight the need to optimize pupal production at early days of collection and to develop a more effective and automated method of sex separation.

For the sterile insect technique, and other related biological control methods where large numbers of the target mosquito are reared artificially, production efficiency is key for the economic viability of the technique. Rearing success begins with high quality eggs. Excess eggs are often stockpiled and stored for longer periods of time. Any pests that prey on these eggs are detrimental to stockpiles and need to be avoided. Psocids of the genus Liposcelis (Psocoptera, Liposcelididae) are common scavengers consuming various types of organic material that are distributed globally and thrive in warm damp environments, making insectaries ideal habitats. In this short report, we investigated the species that has been found scavenging stored mosquito eggs in our insectary and identified it to be Liposcelis bostrychophila Badonnel, 1931. Additional observations were made to determine whether these predators indeed feed on mosquito eggs, and to suggest simple, effective ways of avoiding infestation.

The mass production of mosquitoes is becoming more wide-spread due to the increased application of the sterile insect technique (SIT) and other genetic control programmes. Due to the variable availability and high cost of the bovine liver powder (BLP) constituent of many current larval diets, there is an urgent demand for new ingredients in order to support sustainable and efficient mosquito production while reducing rearing cost, without affecting the quality of the insects produced. Two black soldier fly (BSF) powder-based diet formulations (50% tuna meal, 35% BSF powder, 15% brewer’s yeast and 50% tuna meal + 50% BSF powder) were tested for their suitability to support the development of Aedes aegypti and Ae. albopictus mosquitoes in mass-rearing conditions. Overall, the results indicate that the use of the BSF powder did not negatively impact the development and quality of the produced insects in terms of time to pupation, adult production and male flight ability. Furthermore, depending on the species and diet formulations, there were improvements in some parameters such as female body size, egg production, egg hatch rate and male longevity. BSF powder is a valuable ingredient that can effectively replace costly BLP for the mass production of high quality Ae. aegypti and Ae. albopictus mosquitoes. Both diet formulations can be used for Ae. aegypti showing high plasticity to nutrition sources. However, for Ae. albopictus we recommend the combination including brewer’s yeast.