Search

The experimental study aimed to select the spectrometric results of the solar flare that meet the mathematical conditions for integration, to measure the power of this integrated flux, and to test the integrated power, whether it is able to form a peptide bond between two molecules of selected amino acids on the Earth's surface. Results show that the radiation power of the X17 solar flare scanned by the SOLSTICE and SIM spectrometers aboard the NASA SORCE spacecraft, when used for experimental irradiance of the same parameters, is sufficient to form methionine, alanine, glutamine and proline dipeptides in aqueous solution with pyrophosphate or carbonyl sulphide at laboratory temperature. The experiments, with their successful outcome, provide insight into the biological significance of the narrowband solar flare anchored in the broadband UV solar radiation.

Block copolymer comprising of hydrophilic poly[N-(2-hydroxypropyl)methacrylamide] (PHP) and reactive poly[N-(2-hydrazinyl-2-oxoethyl)methacrylamide] (PMAH) was synthesized by a reversible addition-fragmentation chain transfer (RAFT) polymerization and conjugated with doxorubicin (Dox) and/or RGDS targeting peptide via one-step reaction using N-γ-maleimidobutyryl-oxysuccinimide ester. The resulting copolymer served as a coating of magnetic γ-Fe2O3 nanoparticles that were tested in cell proliferation and in vivo experiments on a mice model with inoculated rat C6 glioblastoma tumor. The nanoparticles conjugated with RGDS peptide and doxorubicin easily engulfed both C6 tumor cell line, primary glioblastoma (GB) cells, and human mesenchymal stem cells (hMSC) used as a control; the particles decreased the GB cell growth by 45% compared to control cells without any treatment. Moreover, the γ-Fe2O3@P(HP-MAH)-RGDS-Dox nanoparticles injected into C6 glioblastoma cell-derived tumors grown in the posterior flank of mice decreased the tumor size and more apoptotic cells were spread compared to that treated with free Dox.

Injectable hydrogel scaffolds combined with stem cell therapy represent a promising approach for minimally invasive surgical tissue repair. In this study, we developed and characterized a fully synthetic, biodegradable poly(N5-(2-hydroxyethyl)-l-glutamine)-based injectable hydrogel modified with integrin-binding arginine-glycine-aspartic acid (RGD) peptide (PHEG-Tyr-RGD). The biodegradable hydroxyphenyl polymer precursor derivative of PHEG-Tyr was enzymatically cross-linked to obtain injectable hydrogels with different physicochemical properties. The gelation time, gel yield, swelling behavior, and storage modulus of the PHEG-Tyr hydrogels were tuned by varying the concentrations of the PHEG-Tyr precursors and horseradish peroxidase as well as the nH2O2/nTyr ratio. The mechanical properties and gelation time of the PHEG-Tyr hydrogel were optimized for the encapsulation of rat mesenchymal stem cells (rMSCs). We focused on the 2D and 3D spreading and viability of rMSCs within the PHEG-Tyr-RGD hydrogels with different physicochemical microenvironments in vitro. Encapsulation of rMSCs shows long-term survival and exhibits cell-matrix and cell-cell interactions reflective of both the RGD concentration and hydrogel stiffness. The presented biomaterial represents a suitable biological microenvironment to guide 3D spreading and may act as a promising 3D artificial extracellular matrix for stem cell therapy.

A new type of hydrophilic, biocompatible, and biodegradable polypeptide nanogel depots loaded with natural serine protease inhibitor α1-antitrypsin (AAT) was applied for inhibition of inflammatory mediator trypsin. Further, poly[N5-(2-hydroxyethyl)-L-glutamine-ran-N5-propargyl-L-glutamine-ran-N5-(6-aminohexyl)-L-glutamine]-ran-N5-[2-(4-hydroxyphenyl)ethyl)-L-glutamine] (PHEG-Tyr) and Nα-L-Lysine-grafted α,β-poly[(2-propyne)-D,L-aspartamide-ran-(2-hydroxyethyl)-DL-aspartamide-ran-(2-(4-hydroxyphenyl)ethyl)-DL-aspartamide] (Nα-Lys-NG) nanogels were prepared by HRP/H2O2-mediated crosslinking in inverse miniemulsions with pH and temperature-stimuli responsive behavior confirmed by dynamic light scattering and zeta potential measurements. The loading capacity of PHEG-Tyr and Nα-Lys-NG nanogels and their release profiles were firstly optimized with bovine serum albumin (BSA) and then used for loading and release of AAT. PHEG-Tyr and Nα-Lys-NG nanogels showed different loading capacities for AAT with the maximum (20 %) achieved with Nα-Lys-NG nanogel. In both cases, the nanogels depots demonstrated a burst release of AAT during 6 h, which could be favorable for quick inhibition of trypsin. A consequent pilot in vitro inhibition study revealed that both PHEG-Tyr and Nα-Lys-NG nanogels loaded with AAT successfully inhibited the enzymatic activity of trypsin. Furthermore, the inhibitory efficiency of the AAT-loaded nanogels was higher than that of AAT itself, indicating that the negatively charged polypeptide nanogels enhance the inhibitory function of AAT loaded in the nanogel depots.

Research of degradable hydrogel polymeric materials exhibiting high water content and mechanical properties resembling tissues is crucial not only in drug delivery systems but also in tissue engineering, medical devices, and biomedical-healthcare sensors. Therefore, we newly offer development of hydrogels based on poly(2-hydroxyethyl methacrylate-co-2-(acetylthio) ethyl methacrylate-co-2-methacryloyloxyethyl phosphorylcholine) [P(HEMA-ATEMA-MPC)] and optimization of their mechanical and in vitro and in vivo degradability. P(HEMA-ATEMA-MPC) hydrogels differed in chemical composition, degree of crosslinking, and starting molar mass of polymers (15, 19, and 30 kDa). Polymer precursors were synthesized by a reversible addition fragmentation chain transfer (RAFT) polymerization using 2-(acetylthio)ethyl methacrylate containing protected thiol groups, which enabled crosslinking and gel formation. Elastic modulus of hydrogels increased with the degree of crosslinking (Slaughter et al., 2009) [1] . In vitro and in vivo controlled degradation was confirmed using glutathione and subcutaneous implantation of hydrogels in rats, respectively. We proved that the hydrogels with higher degree of crosslinking retarded the degradation. Also, albumin, γ-globulin, and fibrinogen adsorption on P(HEMA-ATEMA-MPC) hydrogel surface was tested, to simulate adsorption in living organism. Rat mesenchymal stromal cell adhesion on hydrogels was improved by the presence of RGDS peptide and laminin on the hydrogels. We found that rat mesenchymal stromal cells proliferated better on laminin-coated hydrogels than on RGDS-modified ones.

The efficiency of solid phase extraction (SPE) of DNA on polymer particles is limited by the features of the applied solid support, such as size, hydrophilicity, and functionality and their application in SPE also requires additional steps and compounds to finally obtain sufficient amount of high-quality DNA. The present study describes a preparation of sub-micrometer monodisperse poly(methacrylic acid-co-ethylene dimethacrylate) (PME) particles by precipitation polymerization. The effect of the ethylene dimethacrylate (EDMA) crosslinker concentration on morphology and particle size, which varied from 730 to 900 nm, was investigated. The particles with 5 and 15 wt% EDMA were selected for a study of SPE of plasmid DNA under various adsorption and elution conditions, followed by the enzymatic restriction of isolated DNA to verify a quality the nucleic acid. The particles with 15 wt% EDMA were suitable for the SPE because they retained better colloidal stability during the adsorption without additional induction of DNA conformational change. The quality of isolated DNA was finally verified by enzymatic restriction by restriction endonuclease EcoRI. Moreover, the developed method using PME particles was successfully utilized for DNA isolation from Escherichia coli lysate.

Poly(glycidyl methacrylate) (PGMA) is prone to modifications with different functional groups, magnetic fluids or direct coupling with biological molecules. The purpose of this research was to synthesize new magnetically responsive particles with peroxidase-like activity. Poly(glycidyl methacrylate-co-ethylene dimethacrylate) [P(GMA-EDMA)] particles containing carboxyl groups were obtained by emulsifier-free emulsion polymerization and hydrolysis and oxidation of PGMA with KMnO4, resulting in poly(carboxymethyl methacrylate-co-ethylene dimethacrylate) [P(CMMA-EDMA)] particles. Thionine (Th) was also attached to the particles [(P(CMMA-EDMA)-Th] via EDC/NHS chemistry to observe its effect on electron transfer during the oxidation reaction. Finally, the particles were coated with a nitric acid-stabilized ferrofluid in methanol. The resulting magnetic particles were characterized by several methods, including scanning and transmission electron microscopy, X-ray photoelectron spectroscopy, and vibrating sample magnetometry. The effect of EDMA on the P(CMMA-EDMA) particle size and size distribution was investigated; the particle size changed from 300 to 340 nm, and the particles were monodispersed with a saturation magnetization of 11 Am2/kg. Finally, the effects of temperature and pH on the peroxidase-like activity of the magnetic P(CMMA-EDMA) and P(CMMA-EDMA)-Th particles were investigated. The particles, which exhibited a high activity at pH 4–6 and at ∼37 °C, represent a highly sensitive sensor component potentially useful in enzyme-based immunoassays.

Superporous poly(2-hydroxyethyl methacrylate-co-2-aminoethyl methacrylate) (P(HEMA-AEMA)) hydrogel scaffolds are designed for in vitro 3D culturing of leukemic B cells. Hydrogel porosity, which influences cell functions and growth, is introduced by adding ammonium oxalate needle-like crystals in the polymerization mixture. To improve cell vitality, cell-adhesive Arg-Gly-Asp-Ser (RGDS) peptide is immobilized on the N-(γ-maleimidobutyryloxy)succinimide-activated P(HEMA-AEMA) hydrogels via reaction of SH with maleimide groups. This modification is especially suitable for the survival of primary chronic lymphocytic leukemia cells (B-CLLs) in 3D cell culture. No other tested stimuli (interleukin-4, CD40 ligand, or shaking) can further improve B-CLL survival or metabolic activity. Both unmodified and RGDS-modified P(HEMA-AEMA) scaffolds serve as a long-term (70 days) 3D culture platforms for HS-5 and M2-10B4 bone marrow stromal cell lines and MEC-1 and HG-3 B-CLL cell lines, although the adherent cells retain their physiological morphologies, preferably on RGDS-modified hydrogels. Moreover, the porosity of hydrogels allows direct cell lysis, followed by efficient DNA isolation from the 3D-cultured cells. P(HEMA-AEMA)-RGDS thus serves as a suitable 3D in vitro leukemia model that enables molecular and metabolic assays and allows imaging of cell morphology, interactions, and migration by confocal microscopy. Such applications can prospectively assist in testing of drugs to treat this frequently recurring or refractory cancer.

Antifouling polymer layers containing extracellular matrix-derived peptide motifs offer promising new options for biomimetic surface engineering. In this contribution, we report the design of antifouling vascular grafts bearing biofunctional peptide motifs for tissue regeneration applications based on hierarchical polymer brushes. Hierarchical diblock poly(methyl ether oligo(ethylene glycol) methacrylate-block-glycidyl methacrylate) brushes bearing azide groups (poly(MeOEGMA-block-GMA-N3)) were grown by surface-initiated atom transfer radical polymerization (SI-ATRP) and functionalized with biomimetic RGD peptide sequences. Varying the conditions of copper-catalyzed alkyne-azide &ldquo, click&rdquo, reaction allowed for the immobilization of RGD peptides in a wide surface concentration range. The synthesized hierarchical polymer brushes bearing peptide motifs were characterized in detail using various surface sensitive physicochemical methods. The hierarchical brushes presenting the RGD sequences provided excellent cell adhesion properties and at the same time remained resistant to fouling from blood plasma. The synthesis of anti-fouling hierarchical brushes bearing 1.2 &times, 103 nmol/cm2 RGD biomimetic sequences has been adapted for the surface modification of commercially available grafts of woven polyethylene terephthalate (PET) fibers. The fiber mesh was endowed with polymerization initiator groups via aminolysis and acylation reactions optimized for the material. The obtained bioactive antifouling vascular grafts promoted the specific adhesion and growth of endothelial cells, thus providing a potential avenue for endothelialization of artificial conduits.

Horseradish peroxidase (HRP)/H2O2-mediated crosslinking of polypeptides in inverse miniemulsion is a promising approach for the development of next-generation biocompatible and biodegradable nanogels. Herein, we present a fundamental investigation of the effects of three surfactants and their different concentrations on the (HRP)/H2O2-mediated nanogelation of poly[N5-(2-hydroxyethyl)- l -glutamine-ran-N5-propargyl- l -glutamine-ran-N5-(6-aminohexyl)- l -glutamine]-ran-N5-[2-(4-hydroxyphenyl)ethyl)- l -glutamine] (PHEG-Tyr) in inverse miniemulsion. The surfactants sorbitan monooleate (SPAN 80), polyoxyethylenesorbitan trioleate (TWEEN 85), and dioctyl sulfosuccinate sodium salt (AOT) were selected and their influence on the nanogel size, size distribution, and morphology was evaluated. The most effective nanogelation stabilization was achieved with 20 wt% nonionic surfactant SPAN 80. The diameter of the hydrogel nanoparticles was 230 nm (dynamic light scattering, DLS) and was confirmed also by nanoparticle tracking analysis (NTA) which showed the diameters ranging from 200 to 300 nm. Microscopy and image analyses showed that the nanogel in the dry state was spherical in shape and had number-average diameter Dn = 26 nm and dispersity Ð = 1.91. In the frozen-hydrated state, the nanogel appeared porous and was larger in size with Dn = 182 nm and Ð = 1.52. Our results indicated that the nanogelation of the polymer precursor required a higher concentration of surfactant than classical inverse miniemulsion polymerization to ensure effective stabilization. The developed polypeptide nanogel was radiolabeled with 125I, and in vivo biodistribution and blood clearance evaluations were performed. We found that the 125I-labeled nanogel was well-biodistributed in the bloodstream, cleared from mouse blood during 48 h by renal and hepatic pathways and did not provoke any sign of toxic effects.

Lanthanide-doped upconversion nanoparticles (UCNPs) have a unique capability of upconverting near-infrared (NIR) excitation into ultraviolet, visible, and NIR emission. Conventional UCNPs composed of NaYF4:Yb3+/Er3+(Tm3+) are excited by NIR light at 980 nm, where undesirable absorption by water can cause overheating or damage of living tissues and reduce nanoparticle luminescence. Incorporation of Nd3+ ions into the UCNP lattice shifts the excitation wavelength to 808 nm, where absorption of water is minimal. Herein, core-shell NaYF4:Yb3+/Er3+@NaYF4:Nd3+ nanoparticles, which are doubly doped by sensitizers (Yb3+ and Nd3+) and an activator (Er3+) in the host NaYF4 matrix, were synthesized by high-temperature coprecipitation of lanthanide chlorides in the presence of oleic acid as a stabilizer. Uniform core (24 nm) and core-shell particles with tunable shell thickness (~0.5–4 nm) were thoroughly characterized by transmission electron microscopy (TEM), energy-dispersive analysis, selected area electron diffraction, and photoluminescence emission spectra at 808 and 980 nm excitation. To ensure dispersibility of the particles in biologically relevant media, they were coated by in-house synthesized poly(ethylene glycol) (PEG)-neridronate terminated with an alkyne (Alk). The stability of the NaYF4:Yb3+/Er3+@NaYF4:Nd3+-PEG-Alk nanoparticles in water or 0.01 M PBS and the presence of PEG on the surface were determined by dynamic light scattering, ζ-potential measurements, thermogravimetric analysis, and FTIR spectroscopy. Finally, the adhesive azidopentanoyl-modified GGGRGDSGGGY-NH2 (RGDS) peptide was immobilized on the NaYF4:Yb3+/Er3+@NaYF4:Nd3+-PEG-Alk particles via Cu(I)-catalyzed azide-alkyne cycloaddition. The toxicity of the unmodified core-shell NaYF4:Yb3+/Er3+@NaYF4:Nd3+, NaYF4:Yb3+/Er3+@NaYF4:Nd3+-PEG-Alk, and NaYF4:Yb3+/Er3+@NaYF4:Nd3+-PEG-RGDS nanoparticles on both Hep-G2 and HeLa cells was determined, confirming no adverse effect on their survival and proliferation. The interaction of the nanoparticles with Hep-G2 cells was monitored by confocal microscopy at both 808 and 980 nm excitation. The NaYF4:Yb3+/Er3+@NaYF4:Nd3+-PEG-RGDS nanoparticles were localized on the cell membranes due to specific binding of the RGDS peptide to integrins, in contrast to the NaYF4:Yb3+/Er3+@NaYF4:Nd3+-PEG-Alk particles, which were not engulfed by the cells. The NaYF4:Yb3+/Er3+@NaYF4:Nd3+-PEG-RGDS nanoparticles thus appear to be promising as a new non-invasive probe for specific bioimaging of cells and tissues. This development makes the nanoparticles useful for diagnostic and/or, after immobilization of a bioactive compound, even theranostic applications in the treatment of various fatal diseases.

In this study, we propose a substrate-independent biomimetic modification route for the creation of antifouling polymer brushes. This modification route consists of the formation/deposition of a biomimetic polydopamine anchor layer followed by a well-controlled surface-initiated atom transfer radical polymerization of antifouling polymer brushes initiated by 2-bromo-2-methylpropanoyl groups covalently attached to the hydroxyl and amine groups present in the anchor layer. In this way, we synthesized polymer brushes of methoxy- and hydroxy-capped oligoethylene glycol methacrylate, 2-hydroxyethyl methacrylate and carboxybetaine acrylamide. Spectroscopic ellipsometry (SE) indicated well-controlled polymerization kinetics of the brushes, thus the thickness of the ultra-thin films could be precisely tuned at a nanometer scale. The covalent structure and organization of the brushes grown from the polydopamine anchor layer were accessed by infrared reflection-adsorption spectroscopy (IRRAS) while the change in hydrophilicity caused by the presence of the brush was determined by dynamic water contact angle measurements. Surface plasmon resonance as well as ex situ IRRAS and SE measurements were applied to investigate the adsorption of model protein solutions and undiluted human blood plasma to the brushes. The biomimetic brushes completely suppressed the fouling from single protein solutions and reduced the fouling from plasma to less than 3% from the fouling measured on bare gold surfaces. The proposed modification procedure is non-destructive and does not require any chemical pre-activation or the presence of reactive groups on the substrate surface. Contrary to other antifouling modifications the coating can be performed on various classes of substrates and preserves its properties even in undiluted blood plasma. This work offers a promising technology for the facile fabrication of different surface-based biotechnological and biomedical devices able to perform tailor-made functions while resisting the fouling from the complex biological media where they operate.

Gene silencing with virally delivered shRNA represents a promising approach for treatment of inherited neurodegenerative disorders. In the present study we develop a subpial technique, which we show in adult animals successfully delivers adeno-associated virus (AAV) throughout the cervical, thoracic and lumbar spinal cord, as well as brain motor centers. One-time injection at cervical and lumbar levels just before disease onset in mice expressing a familial amyotrophic lateral sclerosis (ALS)-causing mutant SOD1 produces long-term suppression of motoneuron disease, including near-complete preservation of spinal α-motoneurons and muscle innervation. Treatment after disease onset potently blocks progression of disease and further α-motoneuron degeneration. A single subpial AAV9 injection in adult pigs or non-human primates using a newly designed device produces homogeneous delivery throughout the cervical spinal cord white and gray matter and brain motor centers. Thus, spinal subpial delivery in adult animals is highly effective for AAV-mediated gene delivery throughout the spinal cord and supraspinal motor centers. Injection of AAV–shRNA below the pial surface of the spinal cord prevents onset or ameliorates progression in a mouse model of ALS, and achieves widespread delivery to the spinal cord and brain motor centers in adult pigs and non-human primates.

Antifouling properties and stability in tissue fluids are crucial for the successful application of micro- and nanoparticles in biomedicine. In this study, we prepared monodisperse magnetic poly(glycidyl methacrylate) microspheres with amino groups (mgt.PGMA-NH2) by a multistep swelling polymerization of glycidyl methacrylate (GMA). This was followed by ammonolysis of oxirane groups and precipitation of iron oxides inside the particle pores to make the microspheres magnetic. To suppress nonspecific protein adsorption from biological media, the microspheres were covered by three generations of a compact amino acid dendritic network (Ser-Lys-Ser/Lys-Ser/Lys-Ser) using peptide chemistry. The resulting particles did not aggregate under physiological conditions and contained ∼1 mmol of NH2/g that was available for further modifications. Alkyne groups accessible for click chemistry were introduced to the dendrimer-coated particles by a reaction with 4-pentynoic acid. The external particle surface and internal b...

Neural precursor cells (NSCs) hold great potential to treat a variety of neurodegenerative diseases and injuries to the spinal cord. However, current delivery techniques require an invasive approach in which an injection needle is advanced into the spinal parenchyma to deliver cells of interest. As such, this approach is associated with an inherent risk of spinal injury, as well as a limited delivery of cells into multiple spinal segments. Here, we characterize the use of a novel cell delivery technique that employs single bolus cell injections into the spinal subpial space. In immunodeficient rats, two subpial injections of human NSCs were performed in the cervical and lumbar spinal cord, respectively. The survival, distribution, and phenotype of transplanted cells were assessed 6‐8 months after injection. Immunofluorescence staining and mRNA sequencing analysis demonstrated a near‐complete occupation of the spinal cord by injected cells, in which transplanted human NSCs (hNSCs) preferentially acquired glial phenotypes, expressing oligodendrocyte (Olig2, APC) or astrocyte (GFAP) markers. In the outermost layer of the spinal cord, injected hNSCs differentiated into glia limitans‐forming astrocytes and expressed human‐specific superoxide dismutase and laminin. All animals showed normal neurological function for the duration of the analysis. These data show that the subpial cell delivery technique is highly effective in populating the entire spinal cord with injected NSCs, and has a potential for clinical use in cell replacement therapies for the treatment of ALS, multiple sclerosis, or spinal cord injury., Migration and functional maturation of subpially injected human neural precursor cells (hNSCs) in immunodeficient rats: after injection, cells migrate into the spinal parenchyma across the glia limitans. A subpopulation of cells differentiate into astrocytes, incorporate into glia limitans and express functional markers characteristic if glia limitans‐forming astrocytes, including superoxide dismutase (SOD) and laminin. The other population of injected cells continues to migrate into the spinal parenchyma.

The ability of polysuccinimide (PSI) to open the succinimide ring by nucleophilic reagents leads to the formation of various polyaspartamides under mild conditions. In the current work, amino acids, such as Nα-Boc-L-lysine, leading to the formation of exclusively α-substituted L-lysine polypeptides and L-lysine methyl ester were used as the ring-opening reagents for PSI. The formed materials possess both positively and negatively charged groups on the same repeat unit simultaneously serving as zwitterionic moieties. The chemical structure and component composition were confirmed by 1H NMR and UV/vis spectroscopies. Zwitterionic properties of the synthesized polymers were investigated by zeta potential measurements. The obtained zwitterionic polyaspartamides exhibited anti-protein adsorption properties and the ability to create hydrophilic surfaces. The zwitterionic polyaspartamide nanogels obtained by horseradish peroxidase-mediated crosslinking in inverse miniemulsions and applying different preparation strategies were analysed by dynamic light scattering (DLS) measurements and transmission electron microscopy (TEM) analysis. The results indicated the good morphology and architecture of the nanogels. These peptide-based zwitterionic nanogels, due to their good biocompatibility and anti-protein adsorption ability, are promising materials for biomedical applications.

Iron oxide nanoparticles (IONPs) with intrinsic peroxidase-like activity were proven to be effective and direct catalyst of the nanogelation of synthetic polypeptide precursor poly[N5-(2-hydroxypropyl)-L-glutamine-ran-N5-propragyl-L-glutamine-ran-N5-(6-aminohexyl)-L-glutamine]-ran-N5-[2-(4-hydroxyphenyl)ethyl)-L-glutamine] (P2HPG). IONPs catalytic activity and kinetics were determined to mimic the horseradish peroxidase (HRP) used in the nanogelation of the polymer precursor containing a phenol moiety. The prepared nanogels were characterized by dynamic light scattering (DLS), nanoparticle tracking analysis (NTA), and (cryogenic) transmission electron microscopy (cryo-TEM/TEM). Smart IONPs-catalyzed nanogelation resulted in soft and spherical nanoparticles with diameter of approximately 80 nm.

While many types of biomaterials have been evaluated in experimental spinal cord injury (SCI) research, little is known about the time-related dynamics of the tissue infiltration of these scaffolds. We analyzed the ingrowth of connective tissue, axons and blood vessels inside the superporous poly (2-hydroxyethyl methacrylate) hydrogel with oriented pores. The hydrogels, either plain or seeded with mesenchymal stem cells (MSCs), were implanted in spinal cord transection at the level of Th8. The animals were sacrificed at days 2, 7, 14, 28, 49 and 6 months after SCI and histologically evaluated. We found that within the first week, the hydrogels were already infiltrated with connective tissue and blood vessels, which remained stable for the next 6 weeks. Axons slowly and gradually infiltrated the hydrogel within the first month, after which the numbers became stable. Six months after SCI we observed rare axons crossing the hydrogel bridge and infiltrating the caudal stump. There was no difference in the tissue infiltration between the plain hydrogels and those seeded with MSCs. We conclude that while connective tissue and blood vessels quickly infiltrate the scaffold within the first week, axons show a rather gradual infiltration over the first month, and this is not facilitated by the presence of MSCs inside the hydrogel pores. Further research which is focused on the permissive micro-environment of the hydrogel scaffold is needed, to promote continuous and long-lasting tissue regeneration across the spinal cord lesion.

The minimization of nonspecific protein adsorption is a crucial step in the development of bioseparation processes, immunoassays, and affinity diagnostics. Among the numerous biomaterials, polyzwitterions are known to effectively suppress protein and cell adhesion. This article describes the formation of monodisperse polymer microspheres coated with polysulfobetaine with the aim to limit nonspecific adsorption of bovine serum albumin (BSA) as a model protein. In this process, 2-μm poly(glycidyl methacrylate) (PGMA) microspheres were prepared by dispersion polymerization. To render the microspheres hydrophilic and biocompatible, [3-(methacryloylamino)propyl]dimethyl(3-sulfopropyl)ammonium hydroxide (MPDSAH) was grafted from the surface by reversible addition-fragmentation chain transfer (RAFT) polymerization. Elemental analysis of the modified microspheres revealed up to 20 wt % of poly{[3-(methacryloylamino)propyl]dimethyl(3-sulfopropyl)ammonimum hydroxide} (PMPDSAH). The microspheres were characterized in terms of particle size, morphology, and zeta potential. The amount of BSA nonspecifically adsorbed on the PMPDSAH-modified microspheres decreased to half of that captured on the unmodified PGMA microspheres. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015, 53, 2273–2284

The ability to tailor mechanical properties and architecture is crucial in creating macroporous hydrogel scaffolds for tissue engineering. In the present work, a technique for the modification of the pore size and stiffness of acrylamide-based cryogels is demonstrated via the regulation of an electron beam irradiation dose. The samples were characterized by equilibrium swelling measurements, light and scanning electron microscopy, mercury porosimetry, Brunauer-Emmett-Teller surface area analysis, and stiffness measurements. Their properties were compared to cryogels prepared by a standard redox-initiated radical polymerization. A (125)I radiolabeled azidopentanoyl-GGGRGDSGGGY-NH2 peptide was bound to the surface to determine the concentration of the adhesive sites available for biomimetic modification. The functionality of the prepared substrates was evaluated by in vitro cultivation of adipose-derived stem cells. Moreover, the feasibility of preparing layered cryogels was demonstrated. This may be the key to the future preparation of complex hydrogel-based scaffolds to mimic the extracellular microenvironment in a wide range of applications.

In this study, fibrous scaffolds based on poly(γ-benzyl-L-glutamate) (PBLG) were investigated in terms of the chondrogenic differentiation potential of human tooth germ stem cells (HTGSCs). Through the solution-assisted bonding of the fibres, fully connected scaffolds with pore sizes in the range 20–400 μm were prepared. Biomimetic modification of the PBLG scaffolds was achieved by a two-step reaction procedure: first, aminolysis of the PBLG fibres’ surface layers was performed, which resulted in an increase in the hydrophilicity of the fibrous scaffolds after the introduction of N 5 -hydroxyethyl-L-glutamine units; and second, modification with the short peptide sequence azidopentanoyl–GGGRGDSGGGY–NH2 ,u sing the ’click’ reaction on the previously modified scaffold with 2-propynyl side-chains, was performed. Radio-assay of the 125 I-labelled peptide was used to evaluate the RGD density in the fibrous scaffolds (which varied in the range 10 –3 –10 pM/cm 2 ). All the PBLG scaffolds, especially with density 90 ± 20 fM/cm 2 and 200 ± 100 fM/cm 2 RGD, were found to be potentially suitable for growth and chondrogenic differentiation of HTGSCs. Copyright © 2015 John Wiley & Sons, Ltd.

The efficient isolation and concentration of protein antigens from complex biological samples is a critical step in several analytical methods, such as mass spectrometry, flow cytometry and immunochemistry. These techniques take advantage of magnetic microspheres as immunosorbents. The focus of this study was on the development of new superparamagnetic polymer microspheres for the specific isolation of the tumor suppressor protein p53. Monodisperse macroporous poly(glycidyl methacrylate) (PGMA) microspheres measuring approximately 5 μm and containing carboxyl groups were prepared by multistep swelling polymerization of glycidyl methacrylate (GMA), 2-[(methoxycarbonyl)methoxy]ethyl methacrylate (MCMEMA) and ethylene dimethylacrylate (EDMA) as a crosslinker in the presence of cyclohexyl acetate as a porogen. To render the microspheres magnetic, iron oxide was precipitated within their pores; the Fe content in the particles received ∼18 wt%. Nonspecific interactions between the magnetic particles and biological media were minimized by coating the microspheres with poly(ethylene glycol) (PEG) terminated by carboxyl groups. The carboxyl groups of the magnetic PGMA microspheres were conjugated with primary amino groups of mouse monoclonal DO-1 antibody using conventional carbodiimide chemistry. The efficiency of protein p53 capture and the degree of nonspecific adsorption on neat and PEG-coated magnetic microspheres were determined by western blot analysis.

Poly(ethylene oxide) (PEO) with terminal alkyne and amino groups was grafted to a poly(glycidyl methacrylate) (PGMA) anchoring layer and the PEO/PGMA coatings were investigated as a non-fouling platform for the assessment of ligand–cell receptor interactions. The PEO/PGMA coatings deposited on Si/SiO2 substrate were stable in phosphate buffered saline over a period of 8 days if the thickness of the PEO was less than 30 nm. The stability of the coating could be enhanced by an additional layer of 3-mercaptopropyltrimethoxysilane between the substrate and the PGMA layer. The grafted layers were shown to efficiently suppress nonspecific protein adsorption and cell adhesion. Based on the theoretical ligand-binding capacity, protein adsorption and stability data, the optimum thickness range of the PEO layer is 10–20 nm. The binding of an arginine–glycine–aspartic acid (RGD) ligand using azide–alkyne click chemistry demonstrated that the ligand surface density is controllable in the range from 100 pmol/cm2 up to the capacity of the grafted layer of 102 pmol/cm2 by varying the ligand concentration in the reaction mixture. Calf pulmonary artery endothelial cells adhered to and spread on ligand modified layers proportionally to the ligand surface density, thus demonstrating the applicability of these “grafted to” PEO brushes as a platform for cell receptor–ligand engagement studies.

Identification and evaluation of small changes in β-amyloid peptide (Aβ) levels in cerebrospinal fluid is of crucial importance for early detection of Alzheimer's disease. Microfluidic detection methods enable effective preconcentration of Aβ using magnetic microparticles coated with Aβ antibodies. Poly(glycidyl methacrylate) microspheres are coated with α-amino-ω-methoxy-PEG5000 /α-amino-ω-Boc-NH-PEG5000 Boc groups deprotected and NH2 succinylated to introduce carboxyl groups. Capillary electrophoresis with laser-induced fluorescence detection confirms the efficient capture of Aβ 1-40 peptides on the microspheres with immobilized monoclonal anti-Aβ 6E10. The capture specificity is confirmed by comparing Aβ 1-40 levels on the anti-IgG-immobilized particles used as a control.

The novel synthesis of a polymeric interface grown from the surface of bright fluorescent nanodiamonds is reported. The polymer enables bioorthogonal attachment of various molecules by click chemistry; the particles are resistant to nonspecific protein adsorption and show outstanding colloidal stability in buffers and biological media. The coating fully preserves the unique optical properties of the nitrogen-vacancy centers that are crucial for bioimaging and sensoric applications. Abstract: /irua/be5622/6542.pdf

Diamond exhibits good biocompatibility and a large electrochemical potential window, and thus, it is particularly suitable for bio-functionalization and bio-sensing. Modification of the diamond surface can be achieved through mussel-inspired surface chemistry based on polydopamine (PDA) while maintaining the intrinsic properties of the surface. We present a comparative study on the polymerization/deposition of PDA from an aqueous solution of dopamine on hydrogen- (H) and oxygen- (O) terminated nanocrystalline diamond films (NCD). The dopamine polymerization/deposition was performed under mild conditions, which resulted in a confluent PDA layer. A detailed investigation of the growth kinetics of the PDA film on H- and O-terminated NCD substrates was performed using spectroscopic ellipsometry. The chemical composition, the functional group distribution, the surface topography and the wetting properties of the adherent PDA films were evaluated using X-ray photoelectron spectroscopy, atomic force microscopy and water contact angle goniometry, respectively. According to the results, a PDA layer can be used as a platform for future bio-functionalization and/or optical bio-sensing applications.

Superporous poly(2-hydroxyethyl methacrylate) is successfully used as a scaffold material for tissue engineering; however, it lacks functional groups that support cell adhesion. The objective of this study was to investigate the cell-adhesive properties of biomimetic ligands, such as laminin-derived Ac-CGGASIKVAVS-OH (SIKVAV) peptide and fibronectin subunits (Fn), as well as small molecules exemplified by 2-mercaptoethanol (ME) and cysteine (Cys), immobilized on a copolymer of 2-hydroxyethyl methacrylate (HEMA) with 2-aminoethyl methacrylate (AEMA) by a maleimide-thiol coupling reaction. The maleimide group was introduced to the P(HEMA-AEMA) hydrogels by the reaction of their amino groups with N-γ-maleimidobutyryl-oxysuccinimide ester (GMBS). Mesenchymal stem cells (MSCs) were used to investigate the cell adhesive properties of the modified hydrogels. A significantly larger area of cell growth as well as a higher cell density were found on Fn- and SIKVAV-modified hydrogels when compared to the ME- and Cys-modified supports or neat P(HEMA-AEMA). Moreover, Fn-modification strongly stimulated cell proliferation. The ability of MSCs to differentiate into adipocytes and osteoblasts was maintained on both Fn- and SIKVAV-modifications, but it was reduced on ME-modified hydrogels and neat P(HEMA-AEMA). The results show that the immobilization of SIKVAV and Fn-subunits onto superporous P(HEMA-AEMA) hydrogels via a GMBS coupling reaction improves cell adhesive properties. The high proliferative activity observed on Fn-modified hydrogels suggests that the immobilized Fn-subunits maintain their bioactivity and thus represent a promising tool for application in tissue engineering.

The architecture and mechanical properties of a scaffold for spinal cord injury treatment must provide tissue integration as well as effective axonal regeneration. Previous work has demonstrated the cell-adhesive and growth-promoting properties of the SIKVAV (Ser–Ile–Lys–Val–Ala–Val)-modified highly superporous poly(2-hydroxethyl methacrylate) (PHEMA) hydrogels. The aim of the current study was to optimize the porosity and mechanical properties of this type of hydrogel in order to develop a suitable scaffold for the repair of spinal cord tissue. Three types of highly superporous PHEMA hydrogels with oriented pores of ~60 µm diameter, porosities of 57–68% and equivalent stiffness characterized by elasticity moduli in the range 3–45 kPa were implanted into a spinal cord hemisection, and their integration into the host tissue, as well as the extent of axonal ingrowth into the scaffold pores, were histologically evaluated. The best tissue response was found with a SIKVAV-modified PHEMA hydrogel with 68% porosity and a moderate modulus of elasticity (27 kPa in the direction along the pores and 3.6 kPa in the perpendicular direction). When implanted into a spinal cord transection, the hydrogel promoted tissue bridging as well as aligned axonal ingrowth. In conclusion, a prospective oriented scaffold architecture of SIKVAV-modified PHEMA hydrogels has been developed for spinal cord injury repair; however, to develop an effective treatment for spinal cord injury, multiple therapeutic approaches are needed. Copyright © 2013 John Wiley & Sons, Ltd.

To minimize non-specific protein adsorption on macroporous poly(glycidyl methacrylate) and poly(2-hydroxyethyl methacrylate) microspheres containing amino and/or carboxyl groups, the microspheres are coated with α,ω-bis-carboxy poly(ethylene glycol) and amino-terminated poly(ethylene glycol-co-propylene glycol) or α-methoxy-ω-amino poly(ethylene glycol). Adsorption of bovine serum albumin (BSA), γ-globulin, (125) I-BSA, pepsin, and chymotrypsin on neat and PEGylated microspheres is determined by UV-VIS spectroscopy of supernatants and eluates or by measurement of radioactivity in an ionization chamber. Neat and PEGylated microspheres adsorb 0.8-70% and 0.02-44% of protein, respectively.

This work brings a new insight into the structural transformation and stabilization of polydopamine (PDA) surfaces induced by thermal treatment. Taking advantage of the isotopic enrichment, 15N CP/MAS NMR experiments produce significant signal enhancements for PDA, allowing detection of a range of nitrogen structural units—the reaction products of the conversion of NH3+ units of 15N-dopamine·HCl. In addition, 1H-15N cross-polarization polarization-inversion profiles measured for each of the detected 15N NMR signals and 1H-15N FSLG HETCOR NMR spectra allow revisions and extensions to be made in a structural elucidation of PDA. Combining the NMR data thermogravimetric analyses and an FTIR analysis, several competitive processes that occur during the thermal conversion of dopamine are identified.

We describe a conceptually new, microfibrous, biodegradable functional material prepared from a modified storage polysaccharide also present in humans (glycogen) showing strong potential as direct-contact dressing/interface material for wound healing. Double bonds were introduced into glycogen via allylation and were further exploited for crosslinking of the microfibers. Triple bonds were introduced by propargylation and served for further click functionalization of the microfibers with bioactive peptide. A simple solvent-free method allowing the preparation of thick layers was used to produce microfibers (diameter ca 2 μm) from allylated and/or propargylated glycogen. Crosslinking of the samples was performed by microtron beta-irradiation, and the irradiation dose was optimized to 2 kGy. The results from biological testing showed that these highly porous, hydrophilic, readily functionalizable materials were completely nontoxic to cells growing in their presence. The fibers were gradually degraded in the presence of cells.

Three-dimensional hydrogel supports for mesenchymal and neural stem cells (NSCs) are promising materials for tissue engineering applications such as spinal cord repair. This study involves the preparation and characterization of superporous scaffolds based on a copolymer of 2-hydroxyethyl and 2-aminoethyl methacrylate (HEMA and AEMA) crosslinked with ethylene dimethacrylate. Ammonium oxalate is chosen as a suitable porogen because it consists of needle-like crystals, allowing their parallel arrangement in the polymerization mold. The amino group of AEMA is used to immobilize RGDS and SIKVAVS peptide sequences with an N-γ-maleimidobutyryloxy succinimide ester linker. The amount of the peptide on the scaffold is determined using 125 I radiolabeled SIKVAVS. Both RGDS- and SIKVAVS-modified poly(2-hydroxyethyl methacrylate) scaffolds serve as supports for culturing human mesenchymal stem cells (MSCs) and human fetal NSCs. The RGDS sequence is found to be better for MSC and NSC proliferation and growth than SIKVAVS.

In this study, we propose substrate-independent modification for creating a protein-repellent surface based on dopamine-melanin anchoring layer used for subsequent binding of poly(ethylene oxide) (PEO) from melt. We verified that the dopamine-melanin layer can be formed on literally any substrate and could serve as the anchoring layer for subsequent grafting of PEO chains. Grafting of PEO from melt in a temperature range 70-110 °C produces densely packed PEO layers showing exceptionally low protein adsorption when exposed to the whole blood serum or plasma. The PEO layers prepared from melt at 110 °C retained the protein repellent properties for as long as 10 days after their exposure to physiological-like conditions. The PEO-dopamine-melanin modification represents a simple and universal surface modification method for the preparation of protein repellent surfaces that could serve as a nonfouling background in various applications, such as optical biosensors and tissue engineering.

Modifications of poly(2-hydroxyethyl methacrylate) (PHEMA) with laminin-derived Ac-CGGASIKVAVS-OH peptide sequences have been developed to construct scaffolds that promote cell adhesion and neural differentiation. Radical copolymerization of 2-hydroxyethyl methacrylate with 2-aminoethyl methacrylate (AEMA) and ethylene dimethacrylate in the presence of ammonium oxalate crystals resulted in the formation of superporous P(HEMA-AEMA) hydrogels. They were reacted with gamma-thiobutyrolactone to yield 2-(4-sulfanylbutanamido)ethyl methacrylate (P(HEMA-AEMA)-SH) unit. The Ac-CGGASIKVAVS-OH peptide was immobilized to the sulfhydryl groups of P(HEMA-AEMA)-SH by 2,2'-dithiodipyridine linking reagent via 2-[4-(2-pyridyldisulfanyl)butanamido]ethyl methacrylate (P(HEMA-AEMA)-TPy). The adhesion and morphology of rat mesenchymal stem cells were investigated on the Ac-CGGASIKVAVS-OH-modified P(HEMA-AEMA) as well as on PHEMA, P(HEMA-AEMA)-SH and P(HEMA-AEMA)-TPy hydrogels. Superporous Ac-CGGASIKVAVS-OH-modified PHEMA scaffolds significantly increased the number of attached cells and their growth area on the hydrogel surface in the absence and in the presence of serum in the culture medium. Additionally, the Ac-CGGASIKVAVS-OH peptide supported the attachment, proliferation, differentiation and process spreading of human fetal neural stem cells during the first two weeks of expansion and contributed to the formation of a high percentage of more mature neural cells after four weeks of expansion. The Ac-CGGASIKVAVS-OH modification of superporous P(HEMA-AEMA) hydrogels improves cell adhesive properties and promotes neural stem cell differentiation.

We present an investigation of the preparation of highly porous hydrogels based on biodegradable synthetic poly(α-amino acid) as potential tissue engineering scaffolds. Covalently cross-linked gels with permanent pores were formed under cryogenic conditions by free-radical copolymerization of poly[N(5)-(2-hydroxyethyl)-L-glutamine-stat-N(5)-(2-methacryloyl-oxy-ethyl)-L-glutamine] (PHEG-MA) with 2-hydrohyethyl methacrylate (HEMA) and, optionally, N-propargyl acrylamide (PrAAm) as minor comonomers. The morphology of the cryogels showed interconnected polyhedral or laminar pores. The volume content of communicating water-filled pores was >90%. The storage moduli of the swollen cryogels were in the range of 1-6 kPa, even when the water content was >95%. The enzymatic degradation of a cryogel corresponded to the decrease in its storage modulus during incubation with papain, a model enzyme with specificity analogous to wound-healing enzymes. It was shown that cryogels with incorporated alkyne groups can easily be modified with short synthetic peptides using azide-alkyne cycloaddition "click" chemistry, thus providing porous hydrogel scaffolds with biomimetic features.

Protein-repulsive surfaces modified with ligands for cell adhesion receptors have been widely developed for controlling the cell adhesion and growth in tissue engineering. However, the question of matrix production and deposition by cells on these surfaces has rarely been addressed. In this study, protein-repulsive polydopamine–poly(ethylene oxide) (PDA–PEO) surfaces were functionalized with an RGD-containing peptide (RGD), with a collagen-derived peptide binding fibronectin (Col), or by a combination of these peptides (RGD + Col, ratio 1:1) in concentrations of 90 fmol/cm2 and 700 fmol/cm2 for each peptide type. When seeded with vascular endothelial CPAE cells, the PDA–PEO surfaces proved to be completely non-adhesive for cells. On surfaces with lower peptide concentrations and from days 1 to 3 after seeding, cell adhesion and growth was restored practically only on the RGD-modified surface. However, from days 3 to 7, cell adhesion and growth was improved on surfaces modified with Col and with RGD + Col. At higher peptide concentrations, the cell adhesion and growth was markedly improved on all peptide-modified surfaces in both culture intervals. However, the collagen-derived peptide did not increase the expression of fibronectin in the cells. The deposition of fibronectin on the material surface was generally very low and similar on all peptide-modified surfaces. Nevertheless, the RGD + Col surfaces exhibited the highest cell adhesion stability under a dynamic load, which correlated with the highest expression of talin and vinculin in the cells on these surfaces. A combination of RGD + Col therefore seems to be the most promising for surface modification of biomaterials, e.g. vascular prostheses. Electronic supplementary material The online version of this article (doi:10.1007/s10856-015-5583-3) contains supplementary material, which is available to authorized users.

For a series of 15 N-[4-(nitro)benzylidene]anilines experimentally characterized previously in dimethylsulfoxide solution the geometries were optimized using several density functional theory-based approaches which included, either explicitly or implicitly, dimethylsufoxide as a solvent. Using these geometries the nucleus independent chemical shifts were calculated for model systems and served as estimates of the diamagnetic anisotropy contributions to the Hα and Hm chemical shifts. The experimental chemical shifts corrected for the diamagnetic anisotropy contributions were successfully correlated with the corresponding chemical shift increments. The approach based on the Integral Equation Formalism-Polarized Continuum Model geometries showed the best overall performance and can be used for reliable predictions of the structural and spectroscopical properties of azomethine-containing moieties in different solvents.

A series of 15 4-substituted N-(4-nitrobenzylidene)anilines was synthesized and studied by 1H NMR spectroscopy. Their ab initio calculated geometries and the shielding as expressed by aromatic ring currents were used in correlation analysis. The geometries were fully optimized using density functional theory B3LYP/6-311G** approaches. For the determination of the ring current contribution to the shielding of azomethine hydrogens Hα was used direct ab initio calculation of the chemical shielding in a model system. Experimental chemical shift values free of these contributions were successfully correlated with increments ap of chemical shift for monosubstituted benzenes. In the same manner, the contribution of the anisotropy of C=N double bond to Hm hydrogen were calculated and values of the Hm chemical shift free of this contribution were successfully correlated with increments of chemical shift am.

Identification and evaluation of small changes in β-amyloid peptide (Aβ) levels in cerebrospinal fluid is of crucial importance for early detection of Alzheimer's disease. Microfluidic detection methods enable effective preconcentration of Aβ using magnetic microparticles coated with Aβ antibodies. Poly(glycidyl methacrylate) microspheres are coated with α-amino-ω-methoxy-PEG5000 /α-amino-ω-Boc-NH-PEG5000 Boc groups deprotected and NH2 succinylated to introduce carboxyl groups. Capillary electrophoresis with laser-induced fluorescence detection confirms the efficient capture of Aβ 1-40 peptides on the microspheres with immobilized monoclonal anti-Aβ 6E10. The capture specificity is confirmed by comparing Aβ 1-40 levels on the anti-IgG-immobilized particles used as a control.