Search

Apesar de o esterco líquido de suínos ser um fertilizante, seu uso inadequado pode comprometer a qualidade do solo e água. O objetivo deste trabalho foi avaliar alterações em algumas características químicas de um solo sob pastagem natural com o uso de esterco líquido de suínos e suas implicações agronômicas e ambientais. O experimento foi conduzido de novembro de 1995 a novembro de 1999 em Paraíso do Sul, RS, em condomínio de suinocultores. Os tratamentos constituíram-se de 0, 20 e 40 m³ ha-1 de esterco líquido de suínos, aplicado em intervalos de 45 a 60 dias. Em cada época de aplicação de esterco, a pastagem natural era roçada, a forragem retirada e o esterco reaplicado. Os resultados mostraram que o uso sistemático de esterco líquido de suínos representa a adição de grandes quantidades de nutrientes ao solo, elevando principalmente os teores de P, Ca e Mg em áreas sob pastagem natural. O ambiente para o crescimento das plantas também pode ser melhorado com o uso de esterco líquido de suínos pela diminuição na saturação de Al, mas deve-se monitorar o teor de K no solo, porque, sob pastoreio, os teores podem decrescer. O fato de adicionar altas quantidades de N por meio do esterco líquido de suínos sem alterar seus teores no solo evidencia que ocorrem grandes perdas de N, principalmente na forma de nitrato. Além disso, a elevada concentração de P na camada mais superficial do solo mostra que estes elementos podem comprometer a qualidade do ambiente, especialmente como contaminantes da água.

The studies of fertilization splitting are necessary specially for the grass succession black oat-corn where N immobilization is very common. Four experiments were carried out in commercial farms under no-tillage, in four counties - Itaara, Santo Ângelo, Júlio de Castilhos and Tupanciretã, all of Rio Grande do Sul, Brazil, with the objective of evaluating the splitting of N application in a corn/black oat crop rotation, during the 97/98 and 98/99 cropping seasons. The N was applied at three times -- pre-planted, starter and sidedressed. The pre-planted applied N for corn, corresponding to total or partial rates that would be sidedressed presented similar results in relation to the sidedress application, however, years of above average rainfall presented N deficiency for corn, reducing yield, which indicates that N application as starter or sidedress is recommended.

Este trabalho analisou o efeito da temperatura e período de incubação e da diluição do inóculo, em dois meios de cultura, sobre a quantificação de bactérias totais e esporuladas. O crescimento quantitativo e qualitativo de bactérias totais e esporuladas depende tanto do meio de cultura, temperatura, diluição e tempo utilizados como da interação desses fatores. O meio de TSA apresentou maior contagem que o meio de Thorton de unidades formadoras de colônias (UFC) de bactérias totais mas não de Bacillus spp. As colônias crescidas no meio de TSA apresentaram maior tamanho e forma mais nítida. O cultivo à temperatura de 30°C propiciou maior número de UFC que a 25°C, sobretudo nos primeiros dias de incubação. O crescimento bacteriano correspondeu a uma equação de 3° grau. Dependendo do meio de cultura, da temperatura de incubação e da diluição, os períodos de máximo crescimento foram de 4,9 a 6,9 dias para as bactérias totais e de 4,4 a 7,2 dias para Bacillus spp. Embora tenham sido utilizadas diluições decimais dos inóculos, as proporções entre as contagens variaram de 6,3 a 10,0 vezes para as bactérias totais e de 2,0 a 7,0 para as esporuladas.

Abstract Background Surgery followed by radiotherapy is the standard of care for resectable locally advanced oral cavity squamous cell carcinoma (SCC). We report the treatment outcomes of patients with T3-T4 SCC of the oral cavity treated with chemoradiation, an alternative approach. Patients and methods From a series of 240 patients with stage III-IV carcinoma of the upper aerodigestive tract who were treated consecutively according to the RADPLAT protocol, a subset analysis of 155 patients with T3-T4 SCC (Oral cavity SCC N = 22, oropharynx SCC N = 94 and hypopharynx SCC N = 39), was performed. The goal was to test the hypothesis that oral cavity SCC treated with chemoradiation has similar outcomes to the two comparison sites. Results With a median follow-up of 58 months, local disease control was 69% and the overall survival was 37%. In comparison, local disease control for the oropharynx and hypopharynx groups was 86% and 79% respectively. The overall survival rate for the oropharyngeal and hypopharyngeal groups were 41% and 6% respectively Conclusion Patients with locally advanced oral cavity cancer treated with the chemoradiation protocol RADPLAT have outcomes that are equal or better compared to patients with similar disease involving the oropharynx and hypopharynx

Productive cultivation of the button mushroom (Agaricus bisporus) relies on the use of selective substrates and effective disease management. In extending our previous work on manipulating the developmental microbiome (devome), this study employs the strategy of substrate passaging to explore its effects on crop outcomes and disease dynamics. Here we subjected the casing substrate to ten cycles of passaging. This manipulated substrate stimulated early pinning (primordia formation) by at least three days. Passaged casing also altered disease dynamics when challenged with two commercially important A. bisporus pathogens, Pseudomonas tolaasii (causing bacterial blotch) and Trichoderma aggressivum f. aggressivum (responsible for green mold). Passaged casing had a suppressive effect on blotch disease and a conducive effect on green mold disease. Blotch suppression resulted in a significantly higher yield of asymptomatic mushrooms in all three mushroom harvests (flushes) and in the overall crop yield. Blotch severity was also significantly reduced in passaged casing compared to standard casing due to a lower yield of mushrooms with the highest degree of blotch disease expression. Green mold disease expression was markedly higher in passaged casing, leading to lower numbers of asymptomatic mushrooms. Zones where no growth of hyphae or mushrooms were also observed in passaged casing due to green mold disease pressure. The stimulating effect of passaged casing on mushroom development and the dynamic outcomes for disease challenge from two distinct, commercially damaging diseases, demonstrates the potential for passaged casing to be used as material to study more sustainable mushroom production and disease management practices., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Importance: Agaricus bisporus is an economically important edible mushroom and manipulating its developmental patterns is crucial for maximizing yield and quality. One of the potential strategies for achieving such a goal is passaging microbial communities in compost or casing. The current study demonstrated that passaging substrates develop enriched microbial communities, and after a few passages, certain levels of changes in mushroom developmental patterns (the timing of fruiting bodies formation) were observed as well as shifts in the bacterial communities. Overall, a better understanding of the complex interactions between microorganisms present in the cultivation system may help farmers and researchers to develop more efficient and sustainable cultivation practices that can both benefit the environment and human health., Competing Interests: The authors declare no conflict of interest.

The construction industry makes a significant contribution to global CO 2 emissions. Material extraction, processing, and demolition account for most of its environmental impact. As a response, there is an increasing interest in developing and implementing innovative biomaterials that support a circular economy, such as mycelium-based composites. The mycelium is the network of hyphae of fungi. Mycelium-based composites are renewable and biodegradable biomaterials obtained by ceasing mycelial growth on organic substrates, including agricultural waste. Cultivating mycelium-based composites within molds, however, is often wasteful, especially if molds are not reusable or recyclable. Shaping mycelium-based composites using 3D printing can minimize mold waste while allowing intricate forms to be fabricated. In this research, we explore the use of waste cardboard as a substrate for cultivating mycelium-based composites and the development of extrudable mixtures and workflows for 3D-printing mycelium-based components. In this paper, existing research on the use of mycelium-based material in recent 3D printing efforts was reviewed. This review is followed by the MycoPrint experiments that we conducted, and we focus on the main challenges that we faced (i.e., contamination) and the ways in which we addressed them. The results of this research demonstrate the feasibility of using waste cardboard as a substrate for cultivating mycelia and the potential for developing extrudable mixtures and workflows for 3D-printing mycelium-based components., Competing Interests: The authors declare no conflict of interest.

Rigid polyurethane foams (RPUFs) were synthesized using exclusively lignin-based polyol (LBP) obtained via the oxyalkylation of kraft lignin with propylene carbonate (PC). Using the design of experiments methodology combined with statistical analysis, the formulations were optimized to obtain a bio-based RPUF with low thermal conductivity and low apparent density to be used as a lightweight insulating material. The thermo-mechanical properties of the ensuing foams were compared with those of a commercial RPUF and a RPUF (RPUF-conv) produced using a conventional polyol. The bio-based RPUF obtained using the optimized formulation exhibited low thermal conductivity (0.0289 W/m·K), low density (33.2 kg/m 3 ), and reasonable cell morphology. Although the bio-based RPUF has slightly lower thermo-oxidative stability and mechanical properties than RPUF-conv, it is still suitable for thermal insulation applications. In addition, the fire resistance of this bio-based foam has been improved, with its average heat release rate (HRR) reduced by 18.5% and its burn time extended by 25% compared to RPUF-conv. Overall, this bio-based RPUF has shown potential to replace petroleum-based RPUF as an insulating material. This is the first report regarding the use of 100% unpurified LBP obtained via the oxyalkylation of LignoBoost kraft lignin in the production of RPUFs.

The selection of material used on the occlusal surface of implant-supported prostheses is important, as these materials can transmit destructive forces to the interface between the alveolar bone and the implant. Different prosthetic materials are suggested for implant-supported prostheses. The choice of prosthetic material is a controversial issue, and there is a consensus that implant survival is not affected by the prosthetic material. Three-dimensional finite element studies are often used in dentistry to estimate the stress distribution that occurs in the implant system, peri-implant bone, and prosthetic components. To analyze the influence of the prosthetic restorative material on the stresses in bone tissue and peri-implant through a literature review of three-dimensional finite element studies. The search for articles was performed in the PubMed/Medline database up to November 2021. The selected articles were independently evaluated by two different reviewers. The information collected was author and year of publication, dimensions of implants used, the material used in the prosthetic crown, simulated force and direction, and conclusion and effect. After searching, 14 studies were selected for full reading, and based on the inclusion and exclusion criteria, all could be included in this review. The articles were based on evidence-based laboratory medicine. After analyzing these articles, it was concluded that the prosthetic materials used on the occlusal surface do not interfere with the destruction of stresses to the bone and peri-implant tissue, both in single prostheses and protocol-type prostheses, when three-dimensional finite element method is used., Competing Interests: None declared., (The Author(s). This is an open access article published by Thieme under the terms of the Creative Commons Attribution License, permitting unrestricted use, distribution, and reproduction so long as the original work is properly cited. (https://creativecommons.org/licenses/by/4.0/).)

Lignin-based polyol was obtained via oxyalkylation reaction with propylene carbonate using eucalyptus kraft lignin isolated from the industrial cooking liquor by the Lignoboost ® procedure. This lignin-based polyol (LBP) was used without purification in the preparation of polyurethane (PU) adhesives combined with polymeric 4,4'-methylenediphenyl diisocyanate (pMDI). A series of adhesives were obtained by varying the NCO/OH ratio of PU counterparts (pMDI and LBPs) and their performance was evaluated by gluing wood pieces under predefined conditions. The adhesion properties of the novel PU adhesive were compared with those of a commercial PU adhesive (CPA). The occurrence and extent of curing reactions and changes in the polymeric network of PA were monitored by Fourier transform infrared spectroscopy (FTIR) and dynamic mechanical analysis. Although the lap shear strength and glass transition temperature of the lignin-based PU adhesives have increased steadily with the NCO/OH ratio ranging from 1.1-2.2, chemical aging resistance can be compromised when the NCO/OH is very low. It was found that the lignin-based PU adhesive with an NCO/OH ratio of 1.3 showed better chemical resistance and adhesion efficiency than CPA possibly because the NCO/OH in the latter is too high as revealed by FTIR spectroscopy. Despite some lower thermal stability and shorter gelation time of lignin-based PU than CPA, the former revealed great potential to reduce the use of petroleum-derived polyols and isocyanates with potential application in the furniture industry as wood bonding adhesive.

Currently, the pulp and paper industry generates around 50-70 million tons of lignin annually, which is mainly burned for energy recovery. Lignin, being a natural aromatic polymer rich in functional hydroxyl groups, has been drawing the interest of academia and industry for its valorization, especially for the development of polymeric materials. Among the different types of polymers that can be derived from lignin, polyurethanes (PUs) are amid the most important ones, especially due to their wide range of applications. This review encompasses available technologies to isolate lignin from pulping processes, the main approaches to convert solid lignin into a liquid polyol to produce bio-based polyurethanes, the challenges involving its characterization, and the current technology assessment. Despite the fact that PUs derived from bio-based polyols, such as lignin, are important in contributing to the circular economy, the use of isocyanate is a major environmental hot spot. Therefore, the main strategies that have been used to replace isocyanates to produce non-isocyanate polyurethanes (NIPUs) derived from lignin are also discussed.

Different from other fungal species that can be largely cultivated in 'axenic conditions' using plant material (e.g., species of Lentinula and Pleurotus in 'sterile' straw-based substrate), the commercial Agaricus bisporus cultivation system relies heavily on ecological relationships with a broad range of microorganisms present in the system (compost and casing). Since the A. bisporus cultivation system consists of a microbial manipulation process, it is important to know the microbial community dynamics during the entire cultivation cycle to design further studies and/or crop management strategies to optimize this system. To capture the bacterial community 'flow' from compost raw materials to the casing to the formation and maturation of mushroom caps, community snapshots were generated by direct DNA recovery (amplicon sequencing). The 'bacterial community flow' revealed that compost, casing and mushrooms represent different niches for bacteria present in the cultivation system, but at the same time, a bacterial exchange between microenvironments can occur for a portion of the community. Within each microenvironment, compost showed intense bacterial populational dynamics, probably due to the environmental changes imposed by composting conditions. In casing, the colonization of A. bisporus appeared, to reshape the native bacterial community which later, with some other members present in compost, becomes the core community in mushroom caps. The current bacterial survey along with previous results provides more cues of specific bacteria groups that can be in association with A. bisporus development and health., (© 2021. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Oxyalkylation with propylene carbonate (PC) is a safe process to convert lignin into a reactive liquid polyol to be used in polyurethane formulations. In this study, the effect of operating conditions of oxyalkylation (temperature, time and quantify of PC) on the quality of lignin-based polyol in terms hydroxyl number (I OH ) and viscosity was studied. Full factorial modeling and response surface methodology (RSM) were applied to study the effect and interaction of process variables on the I OH and viscosity of lignin-based polyols. The results revealed that the I OH is highly affected by the reaction time, while the viscosity is affected by the amount of PC. Validation experiments confirmed the model is reliable. Furthermore, RSM optimization allowed to reduce the amount of PC by about 50% and to increase the lignin content in the polyol from 12.5% to 25% ( w / w ) depending on the temperature and time of the process and also on the purpose of the polyol produced (i.e., application in rigid foams or adhesives).

Among the biotic constraints of common mushroom ( Agaricus bisporus ) production, bacterial blotch is considered the most important mushroom disease in terms of global prevalence and economic impact. Etiology and management of bacterial blotch has been a major concern since its original description in 1915. Although Pseudomonas tolaasii is thought to be the main causal agent, various Pseudomonas species, as well as organisms from other genera have been reported to cause blotch symptoms on mushroom caps. In this review, we provide an updated overview on the etiology, epidemiology, and management strategies of bacterial blotch disease. First, diversity of the causal agent(s) and utility of high throughput sequencing-based approaches in the precise characterization and identification of blotch pathogen(s) is explained. Further, due to the limited options for use of conventional pesticides in mushroom farms against blotch pathogen(s), we highlight the role of balanced threshold of relative humidity and temperature in mushroom farms to combat the disease in organic and conventional production. Additionally, we discuss the possibility of the use of biological control agents (either antagonistic mushroom-associated bacterial strains or bacteriophages) for blotch management as one of the sustainable approaches for 21 st century agriculture. Finally, we aim to elucidate the association of mushroom microbiome in cap development and productivity on one hand, and blotch incidence/outbreaks on the other hand.

Background: The 1000 Plant transcriptomes initiative (1KP) explored genetic diversity by sequencing RNA from 1,342 samples representing 1,173 species of green plants (Viridiplantae)., Findings: This data release accompanies the initiative's final/capstone publication on a set of 3 analyses inferring species trees, whole genome duplications, and gene family expansions. These and previous analyses are based on de novo transcriptome assemblies and related gene predictions. Here, we assess their data and assembly qualities and explain how we detected potential contaminations., Conclusions: These data will be useful to plant and/or evolutionary scientists with interests in particular gene families, either across the green plant tree of life or in more focused lineages., (© The Author(s) 2019. Published by Oxford University Press.)

Aims: To investigate characterization of the bacterial community composition and functionality and their impact on substrate biodegradation as well as mushroom yield., Methods and Results: Bacterial diversity, composition and functionality were accessed by DNA-derived analysis for a sugarcane straw-based substrate composted for either 5, 10 or 15 days. In addition, carbon and nitrogen losses, carbohydrate conversion and mushroom yields were measured for the different treatments. Changes were observed in the bacterial community diversity and composition after the process started, but not during the composting process itself. Following phase I, Acinetobacter sequences were recovered in high numbers, and selected genes associated with nitrogen metabolism and lignocellulose deconstruction were mapped. Substrate physicochemical composition showed elevated carbon and nitrogen losses after 10 and 15 days of phase I with reductions in mushroom yield., Conclusions: Acinetobacter species appear to play an important role in substrate degradation processes, and a 5-day phase I period showed a significant higher mushroom yield compared to composting for either 10 or 15 days., Significance and Impact of the Study: This study confers a better understanding of the bacterial community manipulation during the substrate preparation and their influence in substrate selectivity for the Pleurotus ostreatus cultivation., (© 2018 The Society for Applied Microbiology.)

Substrate preparation (i.e., composting) for Agaricus bisporus cultivation is the most critical point of mushroom production. Among many factors involved in the composting process, the microbial ecology of the system is the underlying drive of composting and can be influenced by composting management techniques. Pasteurization temperature at the beginning of phase II, in theory, may influence the bacterial community and subsequently the "selectivity" and nutrition of the final substrate. Therefore, this hypothesis was tested by simulation in bioreactors under different pasteurization conditions (57 °C/6 h, 60 °C/2 h, and 68 °C/2 h), simulating conditions adopted by many producers. Bacterial diversity, based on 16S ribosomal RNA obtained by high-throughput sequencing and classified in operational taxonomic units (OTUs), was greater than previously reported using culture-dependent methods. Alpha diversity estimators show a lower diversity of OTUs under a high-temperature pasteurization condition. Bacillales order shows a relatively higher OTU abundance under a high-pasteurization temperature, which also was related to high ammonia emission measurements. On the other hand, beta diversity analysis showed no significantly changes in the bacterial community structure under different conditions. Agaricus bisporus mycelium growth during a standard spawn run period was significantly slower in the compost pasteurized at high temperature. Since the bacterial community structure was not greatly affected by different pasteurization conditions but by-products left (e.g., ammonia) at the end of compost conditioning varied, further studies need to be conducted to determine the functional role of the microbial communities found during substrate preparation for Agaricus bisporus cultivation.

In recent years, oyster mushroom (Pleurotus ostreatus) has become one of the most cultivated mushrooms in the world, mainly in Brazil. Among many factors involved in a mushroom production, substrate preparation is the most critical step, which can be influenced by composting management techniques. Looking forward to optimizing the substrate preparation process, were tested different composting conditions (7 and 14 days of composting with or without conditioning), potential raw materials (decumbens grass, brizantha grass and sugarcane straw) and nitrogen supplementation (with or without wheat bran) on oyster mushroom yield and biological efficiency (BE). The substrate composted for 7 days with conditioning showed higher yield and biological efficiency of mushroom (24.04 and 100.54 %, respectively). Substrates without conditioning (7 and 14 days of composting) showed smaller mushroom yield and biological efficiency. Among the raw materials tested, brizantha grass showed higher mushroom yield followed by decumbens grass, sugarcane straw and wheat straw (28.5, 24.32, 23.5 and 19.27 %, respectively). Brizantha grass also showed higher biological efficiency followed by sugarcane straw, decumbens grass and wheat straw (123.95, 103.70, 96.90 and 86.44 %, respectively). Supplementation with wheat bran improved yield and biological efficiency in all substrate formulations tested; thus, oyster mushroom yield and biological efficiency were influenced by substrate formulation (raw materials), supplementation and composting conditions.

Motivation: Given a protein sequence and a number of potential domains matching it, what are the domain content and the most likely domain architecture for the sequence? This problem is of fundamental importance in protein annotation, constituting one of the main steps of all predictive annotation strategies. On the other hand, when potential domains are several and in conflict because of overlapping domain boundaries, finding a solution for the problem might become difficult. An accurate prediction of the domain architecture of a multi-domain protein provides important information for function prediction, comparative genomics and molecular evolution., Results: We developed DAMA (Domain Annotation by a Multi-objective Approach), a novel approach that identifies architectures through a multi-objective optimization algorithm combining scores of domain matches, previously observed multi-domain co-occurrence and domain overlapping. DAMA has been validated on a known benchmark dataset based on CATH structural domain assignments and on the set of Plasmodium falciparum proteins. When compared with existing tools on both datasets, it outperforms all of them., Availability and Implementation: DAMA software is implemented in C++ and the source code can be found at http://www.lcqb.upmc.fr/DAMA., Contact: juliana.silva_bernardes@upmc.fr or alessandra.carbone@lip6.fr, Supplementary Information: Supplementary data are available at Bioinformatics online., (© The Author 2015. Published by Oxford University Press.)

Background: An important problem in computational biology is the automatic detection of protein families (groups of homologous sequences). Clustering sequences into families is at the heart of most comparative studies dealing with protein evolution, structure, and function. Many methods have been developed for this task, and they perform reasonably well (over 0.88 of F-measure) when grouping proteins with high sequence identity. However, for highly diverged proteins the performance of these methods can be much lower, mainly because a common evolutionary origin is not deduced directly from sequence similarity. To the best of our knowledge, a systematic evaluation of clustering methods over distant homologous proteins is still lacking., Results: We performed a comparative assessment of four clustering algorithms: Markov Clustering (MCL), Transitive Clustering (TransClust), Spectral Clustering of Protein Sequences (SCPS), and High-Fidelity clustering of protein sequences (HiFix), considering several datasets with different levels of sequence similarity. Two types of similarity measures, required by the clustering sequence methods, were used to evaluate the performance of the algorithms: the standard measure obtained from sequence-sequence comparisons, and a novel measure based on profile-profile comparisons, used here for the first time., Conclusions: The results reveal low clustering performance for the highly divergent datasets when the standard measure was used. However, the novel measure based on profile-profile comparisons substantially improved the performance of the four methods, especially when very low sequence identity datasets were evaluated. We also performed a parameter optimization step to determine the best configuration for each clustering method. We found that TransClust clearly outperformed the other methods for most datasets. This work also provides guidelines for the practical application of clustering sequence methods aimed at detecting accurately groups of related protein sequences.

The effect of irradiation doses (0, 125, 250 and 500 Gy) on the nutritional quality of A. bisporus mushrooms (strains ABI-07/06, ABI-05/03 and PB-1) cultivated in composts based on oat straw (Avena sativa) and brachiaria (Brachiaria sp.) was evaluated. The experimental design was 4 x 3 x 2 factorial scheme (irradiation doses x strains x composts), with 24 treatments, consisting of two repetitions each, totaling 48 experimental units (samples of mushrooms). The samples were irradiated in Cobalt-60 irradiator, model Gammacell 220 kGy, with dose rate of 0.740 kGy h-1, according to the treatments proposed. Subsequently, the control (unirradiated) and the other treatments were maintained at 4±1°C and 90% RH in a climatic chamber for carrying out the chemical analysis of the mushrooms on the 1st and 14th day of storage. It was found that all A. bisporus strains evaluated were food with excellent nutritional value, because they presented high protein and fiber contents and low ethereal extract content; the chemical characterization of the mushrooms was influenced by the compost type in which they were cultivated; gamma irradiation influenced the chemical composition of mushrooms.

Two compost formulations based on oat straw (Avena sativa) and brachiaria (Brachiaria sp.) were tested for the cultivation of three Agaricus bisporus strains (ABI-07/06, ABI-05/03, and PB-1). The experimental design was a 2 × 3 factorial scheme (composts × strains) with 6 treatments and 8 repetitions (boxes containing 12 kg of compost). The chemical characterization of the compost (humidity, organic matter, carbon, nitrogen, pH, raw protein, ethereal extract, fibers, ash, cellulose, hemicellulose, and lignin) before and after the cultivation of A. bisporus and the production (basidiomata mass, productivity, and biological efficiency) were evaluated. Data were submitted to variance analysis, and averages were compared by means of the Tukey's test. According to the results obtained, the chemical and production characteristics showed that the best performances for the cultivation of A. bisporus were presented by the compost based on oat and the strain ABI-07/06.

Objective: To verify whether there is an association between victimization and alcohol use among boys and girls in Porto Alegre, RS, Brazil., Methods: This was a cross-sectional study of students from public schools, aged 10 to 19 years, from the fifth grade of primary education to the third grade of secondary education, selected by two-stage cluster sampling, defined by the socioeconomic characteristics of the neighborhood in which each school is located and by school class. Data collection was by means of a questionnaire which was completed anonymously and voluntarily., Results: Fifty-four percent of the older adolescent boys (aged 14-19) drank alcohol, compared to 17% of the younger adolescent boys (10-13), as did 58% of the older adolescent girls and 19% of the younger adolescent girls. Fifty-seven percent of the students had suffered severe victimization, and 53% had suffered moderate victimization. When the samples were separated by sex, it was observed that boys and girls who drank alcohol reported 2.6 and 1.8 times more severe victimization respectively, while alcohol was associated with 3.1 and 2.5 times greater prevalence of moderate victimization, among boys and girls respectively. When episodes of drunkenness were analyzed, it was observed that adolescents got drunk more than pre-adolescents and that exposure to violence exhibited an increased association with drunkenness. Thirty-two percent of the boys (prevalence ratio, PR = 4.4; 95%CI 2.6-7.3) and 22% of the girls (PR = 2.2; 95%CI 1.2-4.1) who had been the victims of severe violence reported being drunk at least once., Conclusions: Adolescents of both sexes who consume more alcohol are at greater risk of suffering community violence.

The objective of this study was to evaluate the impact of dengue virus infection on liver function by measuring aminotransferase in blood samples from patients serologically diagnosed by according to two MAC-ELISA protocols. Degrees of liver damage were classified according to aminotransferase levels: grade A--normal enzyme levels; grade B--increased levels of at least one of the enzymes; grade C--increased, with at least one of the enzymes being at levels higher than three times the upper reference values; grade D--acute hepatitis, with aminotransferase levels at least ten times their normal values. Of the 169 serologically confirmed cases of dengue at the dengue referral center in Campos dos Goytacazes in the state of Rio de Janeiro, Brazil, 65.1% had abnormal aminotransferase levels: 81 cases being classified as grade B, 25 as grade C and 3 as grade D. A further 34.9% of cases had normal enzyme levels and were classified as grade A. Liver damage is a common complication of dengue infection and aminotransferase levels are a valuable marker for monitoring these cases.