Search

The recent COVID-19 pandemic and the prospect of future global pandemics highlight the long-standing need to passively eliminate viruses and bacteria on surfaces. Conventional antimicrobial surfaces and coatings are typically constrained by a trade-off between antimicrobial efficacy and physical durability. A biphasic polyurethane coating has been developed that breaks this trade-off by incorporating a durability-imparting polycarbonate (PC) discrete phase with a continuous poly(ethylene glycol) (PEG) transport phase that absorbs, stores, and releases antimicrobial active compounds for extended microbial inactivation. The biphasic polymer was shown to absorb carboxylic acid and quaternary ammonium antimicrobial active compounds, maintained their levels after five years of simulated cleaning, and inactivated up to 99.99% of Human Coronavirus 229E and Influenza A H1N1. Furthermore, the levels of antimicrobial active compounds on the biphasic coating could be augmented by cleaning the substrate with a disinfectant. The practicality of biphasic coatings for automotive and commercial aerospace environments was demonstrated by showing control of hardness and stain resistance through biphasic composition, showing environmental durability through heat, humidity, and light exposure, and passing flammability protocols.

We demonstrate rapid [∼mm 3 /(h·L)] organic ligand-free self-assembly of three-dimensional, >50 μm single-domain microassemblies containing up to 10 7 individual aligned nanoparticles through a scalable aqueous process. Organization and alignment of aqueous solution-dispersed nanoparticles are induced by decreasing their pH-dependent surface charge without organic ligands, which could be temperature-sensitive or infrared light absorbing. This process is exhibited by transforming both dispersed iron oxide hydroxide nanorods and lithium yttrium fluoride nanoparticles into high packing density microassemblies. The approach is generalizable to nanomaterials with pH-dependent surface charge (e.g., oxides, fluorides, and sulfides) for applications requiring long-range alignment of nanostructures as well as high packing density.

Transition metal fluorides are an appealing alternative to conventional intercalation compounds for use as cathodes in next-generation lithium batteries due to their extremely high capacity (3-4 times greater than the current state-of-the-art). However, issues related to reversibility, energy efficiency and kinetics prevent their practical application. Here we report on the synthesis, structural and electrochemical properties of ternary metal fluorides (M(1)yM(2)(1-y)F(x): M(1), M(2) = Fe, Cu), which may overcome these issues. By substituting Cu into the Fe lattice, forming the solid-solution Cu(y)Fe(1-y)F(2), reversible Cu and Fe redox reactions are achieved with surprisingly small hysteresis (<150 mV). This finding indicates that cation substitution may provide a new avenue for tailoring key electrochemical properties of conversion electrodes. Although the reversible capacity of Cu conversion fades rapidly, likely due to Cu(+) dissolution, the low hysteresis and high energy suggest that a Cu-based fluoride cathode remains an intriguing candidate for rechargeable lithium batteries.

A high capacity, electrochemically stable, nanostructured Sn electrode for Li ion battery anodes is described. This electrode utilizes a rigid, electrically conductive, nanoporous carbon aerogel scaffold by incorporating tin acetate, Sn(CH3COO)2, into the scaffold pore volume through melt infusion. Incorporation of the Sn(CH3COO)2 by melt infusion ensures a chemically stable contact with the scaffold. The mechanical rigidity of the pore volume confines the Sn to nanometer dimensions without sintering, leading to stable cycling. Separation of the synthesis of the scaffold from the loading with Sn(CH3COO)2 permits optimized division of the scaffold pore volume for expansion and electrolyte access during reaction with Li. Using this design, an electrode based on an aerogel with a 5 nm mode pore size was cycled over 300 times without degradation. In addition, after subtracting the contribution from the carbon scaffold, the capacity exceeded the theoretical capacity for Sn, due to an oxidation reaction occurring at 1.2 V. This excess capacity may be related to the solid-solid or solid-electrolyte interfaces in the electrode, possibly representing a new reversible Li ion reaction.

Reversible benzene dicarboxylate/2-bromobenzene dicarboxylate ligand exchange has been studied in the cubic metal-organic framework MOF-5. Significant exchange (up to ∼50%), with continuous compositional variation, was observed using ex-situ (1)H NMR following treatment over ∼6 h at ∼85 °C in 10-40 mM ligand solutions. Exchange occurred without significant structural degradation as characterized by X-ray diffraction, nitrogen adsorption, and scanning electron microscopy. Solid-state (13)C NMR was used to show that exchanged ligands were incorporated into the framework lattice and not simply adsorbed within the pores. Exchange was found to be sensitive to the small free energy changes caused by the ligand concentration in the exchanging solution indicating that exchange is energetically nearly degenerate. This demonstration of reversible, nearly isoenergetic exchange indicates that mixed ligand MOFs could be developed as dynamic combinatorial chemical systems.

Zeolite-templated carbon (ZTC) materials were synthesized, characterized, and evaluated as potential hydrogen storage materials between 77 and 298 K up to 30 MPa. Successful synthesis of high template fidelity ZTCs was confirmed by X-ray diffraction and nitrogen adsorption at 77 K; BET surface areas up to ~3600 m(2) g(-1) were achieved. Equilibrium hydrogen adsorption capacity in ZTCs is higher than all other materials studied, including superactivated carbon MSC-30. The ZTCs showed a maximum in Gibbs surface excess uptake of 28.6 mmol g(-1) (5.5 wt %) at 77 K, with hydrogen uptake capacity at 300 K linearly proportional to BET surface area: 2.3 mmol g(-1) (0.46 wt %) uptake per 1000 m(2) g(-1) at 30 MPa. This is the same trend as for other carbonaceous materials, implying that the nature of high-pressure adsorption in ZTCs is not unique despite their narrow microporosity and significantly lower skeletal densities. Isoexcess enthalpies of adsorption are calculated between 77 and 298 K and found to be 6.5-6.6 kJ mol(-1) in the Henry's law limit.

Sodalite zeolitic imidazolate frameworks containing Co (ZIF-67) and Zn (ZIF-8) were synthesized at room temperature under aqueous conditions in 10 min. A trialkylamine deprotonated the 2-methylimidazole ligand and nucleated the frameworks. Furthermore, the ligand acted as a structure directing agent in place of an organic solvent.

The reversible LiBH(4)/Mg(2)NiH(4) combined hydride system for hydrogen storage displays a concerted dehydrogenation reaction beginning at 250 degrees C with significantly low enthalpy (DeltaH = 15.4 +/- 2 kJ mol(-1) H(2)) and entropy (DeltaS = 62.2 +/- 3 J K(-1) mol(-1) H(2)).

The local bonding and atomic environments in the Ni-catalyzed destabilized system LiBH4/MgH2 and the quaternary borohydride-amide phase Li3BN2H8, were studied by x-ray absorption spectroscopy. In both cases the Ni catalyst was introduced as NiCl2 and a qualitative comparison of the Ni K-edge near-edge structure suggests the Ni2+ is reduced to primarily Ni0 after ball milling. The extended fine structure of the Ni K edge indicates that the Ni is coordinated by approximately 3 boron atoms with an interatomic distance of approximately 2.1 A and approximately 11 Ni atoms in a split shell at around 2.5 and 2.8 A. These results, and the lack of long-range order, suggest that the Ni is present as a disordered nanocluster with a local structure similar to that of Ni3B. In the fully hydrogenated phase of LiBH4/MgH2 a small amount Mg2NiHx was also present. Surface calculations performed using density functional theory suggest that the lowest kinetic barrier for H2 chemisorption occurs on the Ni3B(100) surface.

A new approach to the incorporation of MgH2 in the nanometer-sized pores of a carbon aerogel scaffold was developed, by infiltrating the aerogel with a solution of dibutylmagnesium (MgBu2) precursor, and then hydrogenating the incorporated MgBu2 to MgH2. The resulting impregnated material showed broad x-ray diffraction peaks of MgH2. The incorporated MgH2 was not visible using a transmission electron microscope, which indicated that the incorporated hydride was nanosized and confined in the nanoporous structure of the aerogel. The loading of MgH2 was determined as 15-17 wt%, of which 75% is reversible over ten cycles. Incorporated MgH2 had >5 times faster dehydrogenation kinetics than ball-milled activated MgH2, which may be attributed to the particle size of the former being smaller than that of the latter. Cycling tests of the incorporated MgH(2) showed that the dehydrogenation kinetics are unchanged over four cycles. Our results demonstrate that confinement of metal hydride materials in a nanoporous scaffold is an efficient way to avoid aggregation and improve cycling kinetics for hydrogen storage materials.

The use of Li3BN2H8 complex hydride as a practical hydrogen storage material is limited by its high desorption temperature and poor reversibility. While certain catalysts have been shown to decrease the dehydrogenation temperature, no significant improvement in reversibility has been reported thus far. In this study, we demonstrated that tuning the particle size to the nanometer scale by infiltration into nanoporous carbon scaffolds leads to dramatic improvements in the reversibility of Li3BN2H8. Possible changes in the dehydrogenation path were also observed in the nanoscaffolded hydride.

Nanoparticles of MgH2 incorporated in a mesoporous carbon aerogel demonstrated accelerated hydrogen exchange kinetics but no thermodynamic change in the equilibrium hydrogen pressure. Aerogels contained pores from <2 to approximately 30 nm in diameter with a peak at 13 nm in the pore size distribution. Nanoscale MgH2 was fabricated by depositing wetting layers of nickel or copper on the aerogel surface, melting Mg into the aerogel, and hydrogenating the Mg to MgH2. Aerogels with metal wetting layers incorporated 9-16 wt% MgH2, while a metal free aerogel incorporated only 3.6 wt% MgH2. The improved hydrogen sorption kinetics are due to both the aerogel limiting the maximum MgH(2) particle diameter and a catalytic effect from the Ni and Cu wetting layers. At 250 degrees C, MgH2 filled Ni decorated and Cu decorated carbon aerogels released H(2) at 25 wt% h(-1) and 5.5 wt% h(-1), respectively, while a MgH(2) filled aerogel without catalyst desorbed only 2.2 wt% h(-1) (all wt% h(-1) values are with respect to MgH2 mass). At the same temperature, MgH2 ball milled with synthetic graphite desorbed only 0.12 wt% h(-1), which demonstrated the advantage of incorporating nanoparticles in a porous host.

Pore size distributions (PSD) and supercritical H2 isotherms have been measured for two activated carbon fiber (ACF) samples. The surface area and the PSD both depend on the degree of activation to which the ACF has been exposed. The low-surface-area ACF has a narrow PSD centered at 0.5 nm, while the high-surface-area ACF has a broad distribution of pore widths between 0.5 and 2 nm. The H2 adsorption enthalpy in the zero-coverage limit depends on the relative abundance of the smallest pores relative to the larger pores. Measurements of the H2 isosteric adsorption enthalpy indicate the presence of energy heterogeneity in both ACF samples. Additional measurements on a microporous, coconut-derived activated carbon are presented for reference.

Enhanced kinetic performance and reversibility have been achieved with uncatalyzed NaAlH4 by incorporation into nanoporous carbon aerogel. Aerogel with a pore size distribution peaked at 13 nm and a pore volume of 0.8 cm(3) g(-1) was filled with NaAlH4 to 94% capacity by melt infusion at 189 degrees C under 183 bar H(2) gas overpressure. Dehydrogenation to NaH + Al with reasonable kinetics was accomplished at 150 degrees C, well below the NaAlH4 melting temperature (183 degrees C), compared to hydrogen release above 230 degrees C for bulk uncatalyzed NaAlH4. Uncatalyzed bulk samples did not rehydrogenate under laboratory conditions, whereas NaAlH4 in a carbon aerogel host was readily rehydrogenated at approximately 160 degrees C and 100 bar H(2) to approximately 85% of its initial capacity. Ball-milled NaAlH4 catalyzed with 4 mol% TiCl3 showed somewhat better kinetics compared to the infused aerogel; nevertheless, the large kinetic enhancement obtained by incorporation into carbon aerogel, even in the absence of a catalyst, demonstrates the substantial benefit of confining the NaAlH4 to nanoscale dimensions.

Despite the promising thermodynamics and storage capacities of many destabilized metal hydride hydrogen storage material systems, they are often kinetically limited from achieving practical and reversible behavior. Such is the case with the Mg2Si system. We investigated the kinetic mechanisms responsible for limiting the reversibility of the MgH2+Si system using thin films as a controlled research platform. We observed that the reaction MgH2 + 1/2Mg2Si + H2 is limited by the mass transport of Mg and Si into separate phases. Hydrogen readily diffuses through the Mg2Si material and nucleating MgH2 phase growth does not result in reaction completion. By depositing and characterizing multilayer films of Mg2Si and Mg with varying Mg2Si layer thicknesses, we conclude that the hydrogenation reaction consumes no more than 1 nm of Mg2Si, making this system impractical for reversible hydrogen storage.

The crystal structures of newly discovered Li4Ge2D and Li4Si2D ternary phases were solved by direct methods using neutron powder diffraction data. Both structures can be described using a Cmmm orthorhombic cell with all hydrogen atoms occupying Li6-octahedral interstices. The overall crystal structure and the geometry of these interstices are compared with those of other related phases, and the stabilization of this novel class of ternary hydrides is discussed.

We report excess hydrogen saturation values from high-pressure isotherms of metal organic framework structures taken at 77 K. Zn benzendicarboxylate (IRMOF-1) and Zn naphthalendicarboxylate (IRMOF-8) linker structures show identical saturation values of 137 hydrogen molecules on a per unit cell basis, despite the higher sorption potential of IRMOF-8 of 6.1 kJ/mol over that of IRMOF-1 of 4.1 kJ/mol. Charge transfer between linker and vertex, as well as surface area, appear to dominate the sorption behavior, over that of linker length in these two systems.